mirrors/Bochs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f229ae1afd
Bochs/bochs/iodev/ne2k.cc
Todd T.Fries 4f1c151520 Move Init $ to ::init()
2001-06-27 20:27:49 +00:00

1243 lines
34 KiB
C++
Raw Blame History

// Copyright (C) 2001 MandrakeSoft S.A.
//
// MandrakeSoft S.A.
// 43, rue d'Aboukir
// 75002 Paris - France
// http://www.linux-mandrake.com/
// http://www.mandrakesoft.com/
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
// Peter Grehan (grehan@iprg.nokia.com) coded all of this
// NE2000/ether stuff.
#include "bochs.h"
#define LOG_THIS bx_ne2k.
bx_ne2k_c bx_ne2k;
#if BX_USE_NE2K_SMF
#define this (&bx_ne2k)
#endif
bx_ne2k_c::bx_ne2k_c(void)
{
put("NE2K");
settype(NE2KLOG);
BX_DEBUG(("Init $Id: ne2k.cc,v 1.18 2001-06-27 20:27:49 fries Exp $"));
// nothing for now
}
bx_ne2k_c::~bx_ne2k_c(void)
{
// nothing for now
}
//
// reset_device - restore state to power-up, cancelling all i/o
//
void
bx_ne2k_c::reset_device(void)
{
BX_DEBUG (("reset_device"));
// Zero out registers and memory
memset( & BX_NE2K_THIS s.CR, 0, sizeof(BX_NE2K_THIS s.CR) );
memset( & BX_NE2K_THIS s.ISR, 0, sizeof(BX_NE2K_THIS s.ISR));
memset( & BX_NE2K_THIS s.IMR, 0, sizeof(BX_NE2K_THIS s.IMR));
memset( & BX_NE2K_THIS s.DCR, 0, sizeof(BX_NE2K_THIS s.DCR));
memset( & BX_NE2K_THIS s.TCR, 0, sizeof(BX_NE2K_THIS s.TCR));
memset( & BX_NE2K_THIS s.TSR, 0, sizeof(BX_NE2K_THIS s.TSR));
memset( & BX_NE2K_THIS s.RCR, 0, sizeof(BX_NE2K_THIS s.RCR));
memset( & BX_NE2K_THIS s.RSR, 0, sizeof(BX_NE2K_THIS s.RSR));
BX_NE2K_THIS s.local_dma = 0;
BX_NE2K_THIS s.page_start = 0;
BX_NE2K_THIS s.page_stop = 0;
BX_NE2K_THIS s.bound_ptr = 0;
BX_NE2K_THIS s.tx_page_start = 0;
BX_NE2K_THIS s.num_coll = 0;
BX_NE2K_THIS s.tx_bytes = 0;
BX_NE2K_THIS s.fifo = 0;
BX_NE2K_THIS s.remote_dma = 0;
BX_NE2K_THIS s.remote_start = 0;
BX_NE2K_THIS s.remote_bytes = 0;
BX_NE2K_THIS s.tallycnt_0 = 0;
BX_NE2K_THIS s.tallycnt_1 = 0;
BX_NE2K_THIS s.tallycnt_2 = 0;
memset( & BX_NE2K_THIS s.physaddr, 0, sizeof(BX_NE2K_THIS s.physaddr));
memset( & BX_NE2K_THIS s.mchash, 0, sizeof(BX_NE2K_THIS s.mchash));
BX_NE2K_THIS s.curr_page = 0;
BX_NE2K_THIS s.rempkt_ptr = 0;
BX_NE2K_THIS s.localpkt_ptr = 0;
BX_NE2K_THIS s.address_cnt = 0;
memset( & BX_NE2K_THIS s.mem, 0, sizeof(BX_NE2K_THIS s.mem));
// Set power-up conditions
BX_NE2K_THIS s.CR.stop = 1;
BX_NE2K_THIS s.CR.rdma_cmd = 1;
BX_NE2K_THIS s.ISR.reset = 1;
BX_NE2K_THIS s.DCR.longaddr = 1;
}
//
// read_cr/write_cr - utility routines for handling reads/writes to
// the Command Register
//
Bit32u
bx_ne2k_c::read_cr(void)
{
Bit32u val =
(((BX_NE2K_THIS s.CR.pgsel & 0x03) << 6) |
((BX_NE2K_THIS s.CR.rdma_cmd & 0x07) << 3) |
(BX_NE2K_THIS s.CR.tx_packet << 2) |
(BX_NE2K_THIS s.CR.start << 1) |
(BX_NE2K_THIS s.CR.stop));
BX_DEBUG(("read CR returns 0x%08x", val));
return val;
}
void
bx_ne2k_c::write_cr(Bit32u value)
{
BX_DEBUG(("wrote 0x%08x to CR"));
// Validate remote-DMA
if ((value & 0x38) == 0x00)
return;
// BX_PANIC(("CR write - invalid rDMA value 0"));
// Check for s/w reset
if (value & 0x01) {
BX_NE2K_THIS s.ISR.reset = 1;
BX_NE2K_THIS s.CR.stop = 1;
} else {
BX_NE2K_THIS s.CR.stop = 0;
}
BX_NE2K_THIS s.CR.rdma_cmd = (value & 0x38) >> 3;
// If start command issued, the RST bit in the ISR
// must be cleared
if ((value & 0x02) && !BX_NE2K_THIS s.CR.start) {
BX_NE2K_THIS s.ISR.reset = 0;
}
BX_NE2K_THIS s.CR.start = ((value & 0x02) == 0x02);
BX_NE2K_THIS s.CR.pgsel = (value & 0xc0) >> 6;
// Check for start-tx
if (value & 0x04) {
if (BX_NE2K_THIS s.CR.stop || !BX_NE2K_THIS s.CR.start)
BX_PANIC(("CR write - tx start, dev in reset"));
if (BX_NE2K_THIS s.tx_bytes == 0)
BX_PANIC(("CR write - tx start, tx bytes == 0"));
#ifdef notdef
// XXX debug stuff
printf("packet tx (%d bytes):\t", BX_NE2K_THIS s.tx_bytes);
for (int i = 0; i < BX_NE2K_THIS s.tx_bytes; i++) {
printf("%02x ", BX_NE2K_THIS s.mem[BX_NE2K_THIS s.tx_page_start*256 -
BX_NE2K_MEMSTART + i]);
if (i && (((i+1) % 16) == 0))
printf("\t");
}
printf("");
#endif
// Send the packet to the system driver
BX_NE2K_THIS ethdev->sendpkt(& BX_NE2K_THIS s.mem[BX_NE2K_THIS s.tx_page_start*256 - BX_NE2K_MEMSTART], BX_NE2K_THIS s.tx_bytes);
// some more debug
if (BX_NE2K_THIS s.tx_timer_active)
BX_PANIC(("CR write, tx timer still active"));
// Schedule a timer to trigger a tx-complete interrupt
// The number of microseconds is the bit-time / 10.
// The bit-time is the preamble+sfd (64 bits), the
// inter-frame gap (96 bits), the CRC (4 bytes), and the
// the number of bits in the frame (s.tx_bytes * 8).
//
bx_pc_system.activate_timer(BX_NE2K_THIS s.tx_timer_index,
(64 + 96 + 4*8 + BX_NE2K_THIS s.tx_bytes*8)/10,
0); // not continuous
}
// Linux probes for an interrupt by setting up a remote-DMA read
// of 0 bytes with remote-DMA completion interrupts enabled.
// Detect this here
if (BX_NE2K_THIS s.CR.rdma_cmd == 0x01 &&
BX_NE2K_THIS s.CR.start &&
BX_NE2K_THIS s.remote_bytes == 0) {
BX_NE2K_THIS s.ISR.rdma_done = 1;
if (BX_NE2K_THIS s.IMR.rdma_inte) {
BX_NE2K_THIS devices->pic->trigger_irq(BX_NE2K_THIS s.base_irq);
}
}
}
//
// chipmem_read/chipmem_write - access the 64K private RAM.
// The ne2000 memory is accessed through the data port of
// the asic (offset 0) after setting up a remote-DMA transfer.
// Both byte and word accesses are allowed.
// The first 16 bytes contains the MAC address at even locations,
// and there is 16K of buffer memory starting at 16K
//
Bit32u
bx_ne2k_c::chipmem_read(Bit32u address, unsigned int io_len)
{
Bit32u retval = 0;
if ((io_len == 2) && (address & 0x1))
BX_PANIC(("unaligned chipmem word read"));
// ROM'd MAC address
if ((address >=0) && (address <= 31)) {
retval = BX_NE2K_THIS s.macaddr[address];
if (io_len == 2) {
retval |= (BX_NE2K_THIS s.macaddr[address + 1] << 8);
}
return (retval);
}
if ((address >= BX_NE2K_MEMSTART) && (address <= BX_NE2K_MEMEND)) {
retval = BX_NE2K_THIS s.mem[address - BX_NE2K_MEMSTART];
if (io_len == 2) {
retval |= (BX_NE2K_THIS s.mem[address - BX_NE2K_MEMSTART + 1] << 8);
}
return (retval);
}
BX_INFO(("out-of-bounds chipmem read, %04X", address));
return (0xff);
}
void
bx_ne2k_c::chipmem_write(Bit32u address, Bit32u value, unsigned io_len)
{
if ((io_len == 2) && (address & 0x1))
BX_PANIC(("unaligned chipmem word write"));
if ((address >= BX_NE2K_MEMSTART) && (address <= BX_NE2K_MEMEND)) {
BX_NE2K_THIS s.mem[address - BX_NE2K_MEMSTART] = value & 0xff;
if (io_len == 2)
BX_NE2K_THIS s.mem[address - BX_NE2K_MEMSTART + 1] = value >> 8;
} else
BX_INFO(("out-of-bounds chipmem write, %04X", address));
}
//
// asic_read/asic_write - This is the high 16 bytes of i/o space
// (the lower 16 bytes is for the DS8390). Only two locations
// are used: offset 0, which is used for data transfer, and
// offset 0xf, which is used to reset the device.
// The data transfer port is used to as 'external' DMA to the
// DS8390. The chip has to have the DMA registers set up, and
// after that, insw/outsw instructions can be used to move
// the appropriate number of bytes to/from the device.
//
Bit32u
bx_ne2k_c::asic_read(Bit32u offset, unsigned int io_len)
{
Bit32u retval = 0;
switch (offset) {
case 0x0: // Data register
//
// A read remote-DMA command must have been issued,
// and the source-address and length registers must
// have been initialised.
//
if (io_len > BX_NE2K_THIS s.remote_bytes)
BX_PANIC(("ne2K: dma read underrun"));
retval = chipmem_read(BX_NE2K_THIS s.remote_dma, io_len);
//
// The 8390 bumps the address and decreases the byte count
// by the selected word size after every access, not by
// the amount of data requested by the host (io_len).
//
BX_NE2K_THIS s.remote_dma += (BX_NE2K_THIS s.DCR.wdsize + 1);
// keep s.remote_bytes from underflowing
if (BX_NE2K_THIS s.remote_bytes > 1)
BX_NE2K_THIS s.remote_bytes -= (BX_NE2K_THIS s.DCR.wdsize + 1);
else
BX_NE2K_THIS s.remote_bytes = 0;
break;
case 0xf: // Reset register
reset_device();
break;
default:
BX_INFO(("asic read invalid address %04x", (unsigned) offset));
break;
}
return (retval);
}
void
bx_ne2k_c::asic_write(Bit32u offset, Bit32u value, unsigned io_len)
{
BX_DEBUG(("asic write addr=0x%08x, value=0x%08x", (unsigned) value, (unsigned) offset));
switch (offset) {
case 0x0: // Data register - see asic_read for a description
if (io_len != (1 + BX_NE2K_THIS s.DCR.wdsize))
BX_PANIC(("dma write, wrong size %d", io_len));
if (BX_NE2K_THIS s.remote_bytes == 0)
BX_PANIC(("ne2K: dma write, byte count 0"));
chipmem_write(BX_NE2K_THIS s.remote_dma, value, io_len);
BX_NE2K_THIS s.remote_dma += io_len;
BX_NE2K_THIS s.remote_bytes -= io_len;
// If all bytes have been written, signal remote-DMA complete
if (BX_NE2K_THIS s.remote_bytes == 0) {
BX_NE2K_THIS s.ISR.rdma_done = 1;
}
break;
case 0xf: // Reset register
reset_device();
break;
default:
BX_PANIC(("asic write invalid address %04x", (unsigned) offset));
break ;
}
}
//
// page0_read/page0_write - These routines handle reads/writes to
// the 'zeroth' page of the DS8390 register file
//
Bit32u
bx_ne2k_c::page0_read(Bit32u offset, unsigned int io_len)
{
BX_DEBUG(("page 0 read from port %04x, len=%u", (unsigned) offset,
(unsigned) io_len));
if (io_len > 1)
BX_PANIC(("bad length! page 0 read from port %04x, len=%u", (unsigned) offset,
(unsigned) io_len));
switch (offset) {
case 0x0: // CR
return (read_cr());
break;
case 0x1: // CLDA0
return (BX_NE2K_THIS s.local_dma & 0xff);
break;
case 0x2: // CLDA1
return (BX_NE2K_THIS s.local_dma >> 8);
break;
case 0x3: // BNRY
return (BX_NE2K_THIS s.bound_ptr);
break;
case 0x4: // TSR
return ((BX_NE2K_THIS s.TSR.ow_coll << 7) |
(BX_NE2K_THIS s.TSR.cd_hbeat << 6) |
(BX_NE2K_THIS s.TSR.fifo_ur << 5) |
(BX_NE2K_THIS s.TSR.no_carrier << 4) |
(BX_NE2K_THIS s.TSR.aborted << 3) |
(BX_NE2K_THIS s.TSR.collided << 2) |
(BX_NE2K_THIS s.TSR.tx_ok));
break;
case 0x5: // NCR
return (BX_NE2K_THIS s.num_coll);
break;
case 0x6: // FIFO
return (BX_NE2K_THIS s.fifo);
break;
case 0x7: // ISR
return ((BX_NE2K_THIS s.ISR.reset << 7) |
(BX_NE2K_THIS s.ISR.rdma_done << 6) |
(BX_NE2K_THIS s.ISR.cnt_oflow << 5) |
(BX_NE2K_THIS s.ISR.overwrite << 4) |
(BX_NE2K_THIS s.ISR.tx_err << 3) |
(BX_NE2K_THIS s.ISR.rx_err << 2) |
(BX_NE2K_THIS s.ISR.pkt_tx << 1) |
(BX_NE2K_THIS s.ISR.pkt_rx));
break;
case 0x8: // CRDA0
return (BX_NE2K_THIS s.remote_dma & 0xff);
break;
case 0x9: // CRDA1
return (BX_NE2K_THIS s.remote_dma >> 8);
break;
case 0xa: // reserved
BX_INFO(("reserved read - page 0, 0xa"));
return (0xff);
break;
case 0xb: // reserved
BX_INFO(("reserved read - page 0, 0xb"));
return (0xff);
break;
case 0xc: // RSR
return ((BX_NE2K_THIS s.RSR.deferred << 7) |
(BX_NE2K_THIS s.RSR.rx_disabled << 6) |
(BX_NE2K_THIS s.RSR.rx_mbit << 5) |
(BX_NE2K_THIS s.RSR.rx_missed << 4) |
(BX_NE2K_THIS s.RSR.fifo_or << 3) |
(BX_NE2K_THIS s.RSR.bad_falign << 2) |
(BX_NE2K_THIS s.RSR.bad_crc << 1) |
(BX_NE2K_THIS s.RSR.rx_ok));
break;
case 0xd: // CNTR0
return (BX_NE2K_THIS s.tallycnt_0);
break;
case 0xe: // CNTR1
return (BX_NE2K_THIS s.tallycnt_1);
break;
case 0xf: // CNTR2
return (BX_NE2K_THIS s.tallycnt_2);
break;
default:
BX_PANIC(("page 0 offset %04x out of range", (unsigned) offset));
}
return(0);
}
void
bx_ne2k_c::page0_write(Bit32u offset, Bit32u value, unsigned io_len)
{
BX_DEBUG(("page 0 write to port %04x, len=%u", (unsigned) offset,
(unsigned) io_len));
if (io_len > 1)
BX_PANIC(("bad length! page 0 write to port %04x, len=%u", (unsigned) offset,
(unsigned) io_len));
switch (offset) {
case 0x0: // CR
write_cr(value);
break;
case 0x1: // PSTART
BX_NE2K_THIS s.page_start = value;
break;
case 0x2: // PSTOP
BX_NE2K_THIS s.page_stop = value;
break;
case 0x3: // BNRY
BX_NE2K_THIS s.bound_ptr = value;
break;
case 0x4: // TPSR
BX_NE2K_THIS s.tx_page_start = value;
break;
case 0x5: // TBCR0
// Clear out low byte and re-insert
BX_NE2K_THIS s.tx_bytes &= 0xff00;
BX_NE2K_THIS s.tx_bytes |= (value & 0xff);
break;
case 0x6: // TBCR1
// Clear out high byte and re-insert
BX_NE2K_THIS s.tx_bytes &= 0x00ff;
BX_NE2K_THIS s.tx_bytes |= ((value & 0xff) << 8);
break;
case 0x7: // ISR
value &= 0x7f; // clear RST bit - status-only bit
// All other values are cleared iff the ISR bit is 1
BX_NE2K_THIS s.ISR.pkt_rx &= ~((value & 0x01) == 0x01);
BX_NE2K_THIS s.ISR.pkt_tx &= ~((value & 0x02) == 0x02);
BX_NE2K_THIS s.ISR.rx_err &= ~((value & 0x04) == 0x04);
BX_NE2K_THIS s.ISR.tx_err &= ~((value & 0x08) == 0x08);
BX_NE2K_THIS s.ISR.overwrite &= ~((value & 0x10) == 0x10);
BX_NE2K_THIS s.ISR.cnt_oflow &= ~((value & 0x20) == 0x20);
BX_NE2K_THIS s.ISR.rdma_done &= ~((value & 0x40) == 0x40);
break;
case 0x8: // RSAR0
// Clear out low byte and re-insert
BX_NE2K_THIS s.remote_start &= 0xff00;
BX_NE2K_THIS s.remote_start |= (value & 0xff);
BX_NE2K_THIS s.remote_dma = BX_NE2K_THIS s.remote_start;
break;
case 0x9: // RSAR1
// Clear out high byte and re-insert
BX_NE2K_THIS s.remote_start &= 0x00ff;
BX_NE2K_THIS s.remote_start |= ((value & 0xff) << 8);
BX_NE2K_THIS s.remote_dma = BX_NE2K_THIS s.remote_start;
break;
case 0xa: // RBCR0
// Clear out low byte and re-insert
BX_NE2K_THIS s.remote_bytes &= 0xff00;
BX_NE2K_THIS s.remote_bytes |= (value & 0xff);
break;
case 0xb: // RBCR1
// Clear out high byte and re-insert
BX_NE2K_THIS s.remote_bytes &= 0x00ff;
BX_NE2K_THIS s.remote_bytes |= ((value & 0xff) << 8);
break;
case 0xc: // RCR
// Check if the reserved bits are set
if (value & 0xc0)
BX_INFO(("RCR write, reserved bits set"));
// Set all other bit-fields
BX_NE2K_THIS s.RCR.errors_ok = ((value & 0x01) == 0x01);
BX_NE2K_THIS s.RCR.runts_ok = ((value & 0x02) == 0x02);
BX_NE2K_THIS s.RCR.broadcast = ((value & 0x04) == 0x04);
BX_NE2K_THIS s.RCR.multicast = ((value & 0x08) == 0x08);
BX_NE2K_THIS s.RCR.promisc = ((value & 0x10) == 0x10);
BX_NE2K_THIS s.RCR.monitor = ((value & 0x20) == 0x20);
// Monitor bit is a little suspicious...
if (value & 0x20)
BX_INFO(("RCR write, monitor bit set!"));
break;
case 0xd: // TCR
// Check reserved bits
if (value & 0xe0)
BX_PANIC(("TCR write, reserved bits set"));
// Test loop mode (not supported)
if (value & 0x06) {
BX_INFO(("TCR write, loop mode not supported"));
BX_NE2K_THIS s.TCR.loop_cntl = (value & 0x6) >> 1;
} else {
BX_NE2K_THIS s.TCR.loop_cntl = 0;
}
// Inhibit-CRC not supported.
if (value & 0x01)
BX_PANIC(("TCR write, inhibit-CRC not supported"));
// Auto-transmit disable very suspicious
if (value & 0x04)
BX_PANIC(("TCR write, auto transmit disable not supported"));
// Allow collision-offset to be set, although not used
BX_NE2K_THIS s.TCR.coll_prio = ((value & 0x08) == 0x08);
break;
case 0xe: // DCR
// Don't allow loopback mode to be set
if (!(value & 0x08)) {
BX_ERROR(("DCR write, loopback mode selected"));
// XXX This is a HACK, lets fix this right!
value -= 8;
}
// It is questionable to set longaddr and auto_rx, since they
// aren't supported on the ne2000. Print a warning and continue
if (value & 0x04)
BX_INFO(("DCR write - LAS set ???"));
if (value & 0x10)
BX_INFO(("DCR write - AR set ???"));
// Set other values.
BX_NE2K_THIS s.DCR.wdsize = ((value & 0x01) == 0x01);
BX_NE2K_THIS s.DCR.endian = ((value & 0x02) == 0x02);
BX_NE2K_THIS s.DCR.longaddr = ((value & 0x04) == 0x04); // illegal ?
BX_NE2K_THIS s.DCR.auto_rx = ((value & 0x10) == 0x10); // also illegal ?
BX_NE2K_THIS s.DCR.fifo_size = (value & 0x50) >> 5;
break;
case 0xf: // IMR
// Check for reserved bit
if (value & 0x80)
BX_PANIC(("IMR write, reserved bit set"));
// Set other values
BX_NE2K_THIS s.IMR.rx_inte = ((value & 0x01) == 0x01);
BX_NE2K_THIS s.IMR.tx_inte = ((value & 0x02) == 0x02);
BX_NE2K_THIS s.IMR.rxerr_inte = ((value & 0x04) == 0x04);
BX_NE2K_THIS s.IMR.txerr_inte = ((value & 0x08) == 0x08);
BX_NE2K_THIS s.IMR.overw_inte = ((value & 0x10) == 0x10);
BX_NE2K_THIS s.IMR.cofl_inte = ((value & 0x20) == 0x20);
BX_NE2K_THIS s.IMR.rdma_inte = ((value & 0x40) == 0x40);
break;
default:
BX_PANIC(("page 0 write, bad offset %0x", offset));
}
}
//
// page1_read/page1_write - These routines handle reads/writes to
// the first page of the DS8390 register file
//
Bit32u
bx_ne2k_c::page1_read(Bit32u offset, unsigned int io_len)
{
BX_DEBUG(("page 1 read from port %04x, len=%u", (unsigned) offset,
(unsigned) io_len));
if (io_len > 1)
BX_PANIC(("bad length! page 1 read from port %04x, len=%u", (unsigned) offset,
(unsigned) io_len));
switch (offset) {
case 0x0: // CR
return (read_cr());
break;
case 0x1: // PAR0-5
case 0x2:
case 0x3:
case 0x4:
case 0x5:
case 0x6:
return (BX_NE2K_THIS s.physaddr[offset - 1]);
break;
case 0x7: // CURR
return (BX_NE2K_THIS s.curr_page);
case 0x8: // MAR0-7
case 0x9:
case 0xa:
case 0xb:
case 0xc:
case 0xd:
case 0xe:
case 0xf:
return (BX_NE2K_THIS s.mchash[offset - 8]);
break;
default:
BX_PANIC(("page 1 r offset %04x out of range", (unsigned) offset));
}
return (0);
}
void
bx_ne2k_c::page1_write(Bit32u offset, Bit32u value, unsigned io_len)
{
BX_DEBUG(("page 1 w offset %04x", (unsigned) offset));
switch (offset) {
case 0x0: // CR
write_cr(value);
break;
case 0x1: // PAR0-5
case 0x2:
case 0x3:
case 0x4:
case 0x5:
case 0x6:
BX_NE2K_THIS s.physaddr[offset - 1] = value;
break;
case 0x7: // CURR
BX_NE2K_THIS s.curr_page = value;
break;
case 0x8: // MAR0-7
case 0x9:
case 0xa:
case 0xb:
case 0xc:
case 0xd:
case 0xe:
case 0xf:
BX_NE2K_THIS s.mchash[offset - 8] = value;
break;
default:
BX_PANIC(("page 1 w offset %04x out of range", (unsigned) offset));
}
}
//
// page2_read/page2_write - These routines handle reads/writes to
// the second page of the DS8390 register file
//
Bit32u
bx_ne2k_c::page2_read(Bit32u offset, unsigned int io_len)
{
BX_DEBUG(("page 2 read from port %04x, len=%u", (unsigned) offset, (unsigned) io_len));
if (io_len > 1)
BX_PANIC(("bad length! page 2 read from port %04x, len=%u", (unsigned) offset, (unsigned) io_len));
switch (offset) {
case 0x0: // CR
return (read_cr());
break;
case 0x1: // PSTART
return (BX_NE2K_THIS s.page_start);
break;
case 0x2: // PSTOP
return (BX_NE2K_THIS s.page_stop);
break;
case 0x3: // Remote Next-packet pointer
return (BX_NE2K_THIS s.rempkt_ptr);
break;
case 0x4: // TPSR
return (BX_NE2K_THIS s.tx_page_start);
break;
case 0x5: // Local Next-packet pointer
return (BX_NE2K_THIS s.localpkt_ptr);
break;
case 0x6: // Address counter (upper)
return (BX_NE2K_THIS s.address_cnt >> 8);
break;
case 0x7: // Address counter (lower)
return (BX_NE2K_THIS s.address_cnt & 0xff);
break;
case 0x8: // Reserved
case 0x9:
case 0xa:
case 0xb:
BX_ERROR(("reserved read - page 2, 0x%02x", (unsigned) offset));
return (0xff);
break;
case 0xc: // RCR
return ((BX_NE2K_THIS s.RCR.monitor << 5) |
(BX_NE2K_THIS s.RCR.promisc << 4) |
(BX_NE2K_THIS s.RCR.multicast << 3) |
(BX_NE2K_THIS s.RCR.broadcast << 2) |
(BX_NE2K_THIS s.RCR.runts_ok << 1) |
(BX_NE2K_THIS s.RCR.errors_ok));
break;
case 0xd: // TCR
return ((BX_NE2K_THIS s.TCR.coll_prio << 4) |
(BX_NE2K_THIS s.TCR.ext_stoptx << 3) |
((BX_NE2K_THIS s.TCR.loop_cntl & 0x3) << 1) |
(BX_NE2K_THIS s.TCR.crc_disable));
break;
case 0xe: // DCR
return (((BX_NE2K_THIS s.DCR.fifo_size & 0x3) << 5) |
(BX_NE2K_THIS s.DCR.auto_rx << 4) |
(BX_NE2K_THIS s.DCR.loop << 3) |
(BX_NE2K_THIS s.DCR.longaddr << 2) |
(BX_NE2K_THIS s.DCR.endian << 1) |
(BX_NE2K_THIS s.DCR.wdsize));
break;
case 0xf: // IMR
return ((BX_NE2K_THIS s.IMR.rdma_inte << 6) |
(BX_NE2K_THIS s.IMR.cofl_inte << 5) |
(BX_NE2K_THIS s.IMR.overw_inte << 4) |
(BX_NE2K_THIS s.IMR.txerr_inte << 3) |
(BX_NE2K_THIS s.IMR.rxerr_inte << 2) |
(BX_NE2K_THIS s.IMR.tx_inte << 1) |
(BX_NE2K_THIS s.IMR.rx_inte));
break;
default:
BX_PANIC(("page 2 offset %04x out of range", (unsigned) offset));
}
return (0);
};
void
bx_ne2k_c::page2_write(Bit32u offset, Bit32u value, unsigned io_len)
{
// Maybe all writes here should be BX_PANIC()'d, since they
// affect internal operation, but let them through for now
// and print a warning.
if (offset != 0)
BX_ERROR(("page 2 write ?"));
switch (offset) {
case 0x0: // CR
write_cr(value);
break;
case 0x1: // CLDA0
// Clear out low byte and re-insert
BX_NE2K_THIS s.local_dma &= 0xff00;
BX_NE2K_THIS s.local_dma |= (value & 0xff);
break;
case 0x2: // CLDA1
// Clear out high byte and re-insert
BX_NE2K_THIS s.local_dma &= 0x00ff;
BX_NE2K_THIS s.local_dma |= ((value & 0xff) << 8);
break;
case 0x3: // Remote Next-pkt pointer
BX_NE2K_THIS s.rempkt_ptr = value;
break;
case 0x4:
BX_PANIC(("page 2 write to reserved offset 4"));
break;
case 0x5: // Local Next-packet pointer
BX_NE2K_THIS s.localpkt_ptr = value;
break;
case 0x6: // Address counter (upper)
// Clear out high byte and re-insert
BX_NE2K_THIS s.address_cnt &= 0x00ff;
BX_NE2K_THIS s.address_cnt |= ((value & 0xff) << 8);
break;
case 0x7: // Address counter (lower)
// Clear out low byte and re-insert
BX_NE2K_THIS s.address_cnt &= 0xff00;
BX_NE2K_THIS s.address_cnt |= (value & 0xff);
break;
case 0x8:
case 0x9:
case 0xa:
case 0xb:
case 0xc:
case 0xd:
case 0xe:
case 0xf:
BX_PANIC(("page 2 write to reserved offset %0x", offset));
break;
default:
BX_PANIC(("page 2 write, illegal offset %0x", offset));
break;
}
}
//
// page3_read/page3_write - writes to this page are illegal
//
Bit32u
bx_ne2k_c::page3_read(Bit32u offset, unsigned int io_len)
{
BX_PANIC(("page 3 read attempted"));
return (0);
}
void
bx_ne2k_c::page3_write(Bit32u offset, Bit32u value, unsigned io_len)
{
BX_PANIC(("page 3 write attempted"));
}
//
// tx_timer_handler/tx_timer
//
void
bx_ne2k_c::tx_timer_handler(void *this_ptr)
{
bx_ne2k_c *class_ptr = (bx_ne2k_c *) this_ptr;
class_ptr->tx_timer();
}
void
bx_ne2k_c::tx_timer(void)
{
BX_DEBUG(("tx_timer"));
BX_NE2K_THIS s.TSR.tx_ok = 1;
// Generate an interrupt if not masked and not one in progress
if (BX_NE2K_THIS s.IMR.tx_inte && !BX_NE2K_THIS s.ISR.pkt_tx) {
BX_NE2K_THIS s.ISR.pkt_tx = 1;
BX_NE2K_THIS devices->pic->trigger_irq(BX_NE2K_THIS s.base_irq);
}
BX_NE2K_THIS s.tx_timer_active = 0;
}
//
// read_handler/read - i/o 'catcher' function called from BOCHS
// mainline when the CPU attempts a read in the i/o space registered
// by this ne2000 instance
//
Bit32u
bx_ne2k_c::read_handler(void *this_ptr, Bit32u address, unsigned io_len)
{
#if !BX_USE_NE2K_SMF
bx_ne2k_c *class_ptr = (bx_ne2k_c *) this_ptr;
return( class_ptr->read(address, io_len) );
}
Bit32u
bx_ne2k_c::read(Bit32u address, unsigned io_len)
{
#else
UNUSED(this_ptr);
#endif // !BX_USE_NE2K_SMF
BX_DEBUG(("read addr %x, len %d", address, io_len));
Bit32u retval;
int offset = address - BX_NE2K_THIS s.base_address;
if (offset >= 0x10) {
retval = asic_read(offset - 0x10, io_len);
} else {
switch (BX_NE2K_THIS s.CR.pgsel) {
case 0x00:
retval = page0_read(offset, io_len);
break;
case 0x01:
retval = page1_read(offset, io_len);
break;
case 0x02:
retval = page2_read(offset, io_len);
break;
case 0x03:
retval = page3_read(offset, io_len);
break;
default:
BX_PANIC(("ne2K: unknown value of pgsel in read - %d",
BX_NE2K_THIS s.CR.pgsel));
}
}
return (retval);
}
//
// write_handler/write - i/o 'catcher' function called from BOCHS
// mainline when the CPU attempts a write in the i/o space registered
// by this ne2000 instance
//
void
bx_ne2k_c::write_handler(void *this_ptr, Bit32u address, Bit32u value,
unsigned io_len)
{
#if !BX_USE_NE2K_SMF
bx_ne2k_c *class_ptr = (bx_ne2k_c *) this_ptr;
class_ptr->write(address, value, io_len);
}
void
bx_ne2k_c::write(Bit32u address, Bit32u value, unsigned io_len)
{
#else
UNUSED(this_ptr);
#endif // !BX_USE_NE2K_SMF
BX_DEBUG(("write with length %d", io_len));
int offset = address - BX_NE2K_THIS s.base_address;
//
// The high 16 bytes of i/o space are for the ne2000 asic -
// the low 16 bytes are for the DS8390, with the current
// page being selected by the PS0,PS1 registers in the
// command register
//
if (offset >= 0x10) {
asic_write(offset - 0x10, value, io_len);
} else {
switch (BX_NE2K_THIS s.CR.pgsel) {
case 0x00:
page0_write(offset, value, io_len);
break;
case 0x01:
page1_write(offset, value, io_len);
break;
case 0x02:
page2_write(offset, value, io_len);
break;
case 0x03:
page3_write(offset, value, io_len);
break;
default:
BX_PANIC(("ne2K: unknown value of pgsel in write - %d",
BX_NE2K_THIS s.CR.pgsel));
}
}
}
/*
* mcast_index() - return the 6-bit index into the multicast
* table. Stolen unashamedly from FreeBSD's if_ed.c
*/
unsigned
bx_ne2k_c::mcast_index(const void *dst)
{
#define POLYNOMIAL 0x04c11db6
unsigned long crc = 0xffffffffL;
int carry, i, j;
unsigned char b;
unsigned char *ep = (unsigned char *) dst;
for (i = 6; --i >= 0;) {
b = *ep++;
for (j = 8; --j >= 0;) {
carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
crc <<= 1;
b >>= 1;
if (carry)
crc = ((crc ^ POLYNOMIAL) | carry);
}
}
return (crc >> 26);
#undef POLYNOMIAL
}
/*
* Callback from the eth system driver when a frame has arrived
*/
void
bx_ne2k_c::rx_handler(void *arg, const void *buf, unsigned len)
{
BX_DEBUG(("rx_handler with length %d", len));
bx_ne2k_c *class_ptr = (bx_ne2k_c *) arg;
class_ptr->rx_frame(buf, len);
}
/*
* rx_frame() - called by the platform-specific code when an
* ethernet frame has been received. The destination address
* is tested to see if it should be accepted, and if the
* rx ring has enough room, it is copied into it and
* the receive process is updated
*/
void
bx_ne2k_c::rx_frame(const void *buf, unsigned io_len)
{
unsigned pages;
unsigned avail;
unsigned idx;
int wrapped;
int nextpage;
unsigned char pkthdr[4];
unsigned char *pktbuf = (unsigned char *) buf;
unsigned char *startptr;
static unsigned char bcast_addr[6] = {0xff,0xff,0xff,0xff,0xff,0xff};
BX_DEBUG(("rx_frame with length %d", io_len));
if ((BX_NE2K_THIS s.CR.start == 0) ||
(BX_NE2K_THIS s.page_start == 0) ||
(BX_NE2K_THIS s.TCR.loop_cntl != 0)) {
return;
}
// Add the pkt header + CRC to the length, and work
// out how many 256-byte pages the frame would occupy
pages = (io_len + 4 + 4)/256 + 1;
if (BX_NE2K_THIS s.curr_page < BX_NE2K_THIS s.bound_ptr) {
avail = BX_NE2K_THIS s.bound_ptr - BX_NE2K_THIS s.curr_page;
} else {
avail = (BX_NE2K_THIS s.page_stop - BX_NE2K_THIS s.page_start) -
(BX_NE2K_THIS s.curr_page - BX_NE2K_THIS s.bound_ptr);
wrapped = 1;
}
// Avoid getting into a buffer overflow condition by not attempting
// to do partial receives. The emulation to handle this condition
// seems particularly painful.
if (avail < pages) {
return;
}
if ((io_len < 60) && !BX_NE2K_THIS s.RCR.runts_ok) {
return;
}
// Do address filtering if not in promiscuous mode
if (!BX_NE2K_THIS s.RCR.promisc) {
if (!memcmp(buf, bcast_addr, 6)) {
if (!BX_NE2K_THIS s.RCR.broadcast) {
return;
}
} else if (pktbuf[0] & 0x01) {
idx = mcast_index(buf);
if (!(BX_NE2K_THIS s.mchash[idx >> 3] & (1 << (idx & 0x7)))) {
return;
}
} else if (memcmp(buf, BX_NE2K_THIS s.physaddr, 6)) {
return;
}
}
nextpage = BX_NE2K_THIS s.curr_page + pages;
if (nextpage >= BX_NE2K_THIS s.page_stop) {
nextpage -= BX_NE2K_THIS s.page_stop - BX_NE2K_THIS s.page_start;
}
// Setup packet header
pkthdr[0] = 0; // rx status - old behavior
pkthdr[0] = 1; // Probably better to set it all the time
// rather than set it to 0, which is clearly wrong.
if (pktbuf[0] & 0x01) {
pkthdr[0] |= 0x20; // rx status += multicast packet
}
pkthdr[1] = nextpage; // ptr to next packet
pkthdr[2] = (io_len + 8) & 0xff; // length-low
pkthdr[3] = (io_len + 8) >> 8; // length-hi
// copy into buffer, update curpage, and signal interrupt if config'd
startptr = & BX_NE2K_THIS s.mem[BX_NE2K_THIS s.curr_page * 256 -
BX_NE2K_MEMSTART];
if ((nextpage > BX_NE2K_THIS s.curr_page) ||
((BX_NE2K_THIS s.curr_page + pages) == BX_NE2K_THIS s.page_stop)) {
memcpy(startptr, pkthdr, 4);
memcpy(startptr + 4, buf, io_len);
BX_NE2K_THIS s.curr_page = nextpage;
} else {
int endbytes = (BX_NE2K_THIS s.page_stop - BX_NE2K_THIS s.curr_page)
* 256;
memcpy(startptr, pkthdr, 4);
memcpy(startptr + 4, buf, endbytes - 4);
startptr = & BX_NE2K_THIS s.mem[BX_NE2K_THIS s.page_start * 256 -
BX_NE2K_MEMSTART];
memcpy(startptr, (void *)(pktbuf + endbytes - 4),
io_len - endbytes + 8);
BX_NE2K_THIS s.curr_page = nextpage;
}
BX_NE2K_THIS s.RSR.rx_ok = 1;
if (pktbuf[0] & 0x80) {
BX_NE2K_THIS s.RSR.rx_mbit = 1;
}
BX_NE2K_THIS s.ISR.pkt_rx = 1;
if (BX_NE2K_THIS s.IMR.rx_inte) {
BX_NE2K_THIS devices->pic->trigger_irq(BX_NE2K_THIS s.base_irq);
}
}
void
bx_ne2k_c::init(bx_devices_c *d)
{
BX_DEBUG(("Init $Id: ne2k.cc,v 1.18 2001-06-27 20:27:49 fries Exp $"));
BX_NE2K_THIS devices = d;
if (bx_options.ne2k.Ovalid->get ()) {
// Bring the register state into power-up state
reset_device();
// Read in values from config file
BX_NE2K_THIS s.base_address = bx_options.ne2k.Oioaddr->get ();
BX_NE2K_THIS s.base_irq = bx_options.ne2k.Oirq->get ();
memcpy(BX_NE2K_THIS s.physaddr, bx_options.ne2k.Omacaddr->getptr (), 6);
BX_NE2K_THIS s.tx_timer_index =
bx_pc_system.register_timer(this, tx_timer_handler, 0,
0,0); // one-shot, inactive
// Register the IRQ and i/o port addresses
BX_NE2K_THIS devices->register_irq(BX_NE2K_THIS s.base_irq,
"ne2000 ethernet NIC");
for (unsigned addr = BX_NE2K_THIS s.base_address;
addr <= BX_NE2K_THIS s.base_address + 0x20;
addr++) {
BX_NE2K_THIS devices->register_io_read_handler(this,
read_handler,
addr,
"ne2000 NIC");
BX_NE2K_THIS devices->register_io_write_handler(this,
write_handler,
addr,
"ne2000 NIC");
}
BX_INFO(("irq %d, ioport 0x%x, mac %02x:%02x:%02x:%02x:%02x:%02x",
BX_NE2K_THIS s.base_irq,
BX_NE2K_THIS s.base_address,
BX_NE2K_THIS s.physaddr[0],
BX_NE2K_THIS s.physaddr[1],
BX_NE2K_THIS s.physaddr[2],
BX_NE2K_THIS s.physaddr[3],
BX_NE2K_THIS s.physaddr[4],
BX_NE2K_THIS s.physaddr[5]));
// Initialise the mac address area by doubling the physical address
BX_NE2K_THIS s.macaddr[0] = BX_NE2K_THIS s.physaddr[0];
BX_NE2K_THIS s.macaddr[1] = BX_NE2K_THIS s.physaddr[0];
BX_NE2K_THIS s.macaddr[2] = BX_NE2K_THIS s.physaddr[1];
BX_NE2K_THIS s.macaddr[3] = BX_NE2K_THIS s.physaddr[1];
BX_NE2K_THIS s.macaddr[4] = BX_NE2K_THIS s.physaddr[2];
BX_NE2K_THIS s.macaddr[5] = BX_NE2K_THIS s.physaddr[2];
BX_NE2K_THIS s.macaddr[6] = BX_NE2K_THIS s.physaddr[3];
BX_NE2K_THIS s.macaddr[7] = BX_NE2K_THIS s.physaddr[3];
BX_NE2K_THIS s.macaddr[8] = BX_NE2K_THIS s.physaddr[4];
BX_NE2K_THIS s.macaddr[9] = BX_NE2K_THIS s.physaddr[4];
BX_NE2K_THIS s.macaddr[10] = BX_NE2K_THIS s.physaddr[5];
BX_NE2K_THIS s.macaddr[11] = BX_NE2K_THIS s.physaddr[5];
// ne2k signature
for (int i = 12; i < 32; i++)
BX_NE2K_THIS s.macaddr[i] = 0x57;
// Attach to the simulated ethernet dev
BX_NE2K_THIS ethdev = eth_locator_c::create(bx_options.ne2k.Oethmod->getptr (),
bx_options.ne2k.Oethdev->getptr (),
(const char *) bx_options.ne2k.Omacaddr->getptr (),
rx_handler,
this);
if (BX_NE2K_THIS ethdev == NULL) {
BX_INFO(("could not find eth module %s - using null instead",
bx_options.ne2k.Oethmod->getptr ()));
BX_NE2K_THIS ethdev = eth_locator_c::create("null", NULL,
(const char *) bx_options.ne2k.Omacaddr->getptr (),
rx_handler,
this);
if (BX_NE2K_THIS ethdev == NULL)
BX_PANIC(("could not locate null module"));
}
}
}
Reference in New Issue View Git Blame Copy Permalink