852 lines
22 KiB
C++
852 lines
22 KiB
C++
/////////////////////////////////////////////////////////////////////////
|
|
// $Id: pit82c54.cc,v 1.17 2002-02-21 19:22:42 yakovlev Exp $
|
|
/////////////////////////////////////////////////////////////////////////
|
|
//
|
|
/*
|
|
* Emulator of an Intel 8254/82C54 Programmable Interval Timer.
|
|
* Greg Alexander <yakovlev@usa.com>
|
|
*
|
|
* This code is not yet linked into Bochs, but has been included so
|
|
* that you can experiment with it. (bbd)
|
|
*
|
|
*
|
|
* Things I am unclear on (greg):
|
|
* 1.)What happens if both the status and count registers are latched,
|
|
* but the first of the two count registers has already been read?
|
|
* I.E.:
|
|
* latch count 0 (16-bit)
|
|
* Read count 0 (read LSByte)
|
|
* READ_BACK status of count 0
|
|
* Read count 0 - do you get MSByte or status?
|
|
* This will be flagged as an error.
|
|
* 2.)What happens when we latch the output in the middle of a 2-part
|
|
* unlatched read?
|
|
* 3.)I assumed that programming a counter removes a latched status.
|
|
* 4.)I implemented the 8254 description of mode 0, not the 82C54 one.
|
|
* 5.)clock() calls represent a rising clock edge followed by a falling
|
|
* clock edge.
|
|
* 6.)What happens when we trigger mode 1 in the middle of a 2-part
|
|
* write?
|
|
*/
|
|
|
|
#include "bochs.h"
|
|
#include "pit82c54.h"
|
|
#define LOG_THIS this->
|
|
|
|
|
|
void pit_82C54::print_counter(counter_type & thisctr) {
|
|
#if 1
|
|
BX_INFO(("Printing Counter"));
|
|
BX_INFO(("count: %d",thisctr.count));
|
|
BX_INFO(("count_binary: %x",thisctr.count_binary));
|
|
BX_INFO(("counter gate: %x",thisctr.GATE));
|
|
BX_INFO(("counter OUT: %x",thisctr.OUTpin));
|
|
BX_INFO(("next_change_time: %d",thisctr.next_change_time));
|
|
BX_INFO(("End Counter Printout"));
|
|
#endif
|
|
}
|
|
|
|
void pit_82C54::print_cnum(Bit8u cnum) {
|
|
if((cnum>MAX_COUNTER) || (cnum<0)) {
|
|
BX_ERROR(("Bad counter index to print_cnum"));
|
|
} else {
|
|
print_counter(counter[cnum]);
|
|
}
|
|
}
|
|
|
|
void pit_82C54::latch_counter(counter_type & thisctr) {
|
|
if(thisctr.count_LSB_latched || thisctr.count_MSB_latched) {
|
|
//Do nothing because previous latch has not been read.;
|
|
} else {
|
|
switch(thisctr.read_state) {
|
|
case MSByte:
|
|
thisctr.outlatch=thisctr.count & 0xFFFF;
|
|
thisctr.count_MSB_latched=1;
|
|
break;
|
|
case LSByte:
|
|
thisctr.outlatch=thisctr.count & 0xFFFF;
|
|
thisctr.count_LSB_latched=1;
|
|
break;
|
|
case LSByte_multiple:
|
|
thisctr.outlatch=thisctr.count & 0xFFFF;
|
|
thisctr.count_LSB_latched=1;
|
|
thisctr.count_MSB_latched=1;
|
|
break;
|
|
case MSByte_multiple:
|
|
if(!(seen_problems & UNL_2P_READ)) {
|
|
// seen_problems|=UNL_2P_READ;
|
|
BX_ERROR(("Unknown behavior when latching during 2-part read."));
|
|
BX_ERROR((" This message will not be repeated."));
|
|
}
|
|
//I guess latching and resetting to LSB first makes sense;
|
|
BX_DEBUG(("Setting read_state to LSB_mult"));
|
|
thisctr.read_state=LSByte_multiple;
|
|
thisctr.outlatch=thisctr.count & 0xFFFF;
|
|
thisctr.count_LSB_latched=1;
|
|
thisctr.count_MSB_latched=1;
|
|
break;
|
|
default:
|
|
BX_ERROR(("Unknown read mode found during latch command."));
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void pit_82C54::set_OUT (counter_type & thisctr, bool data) {
|
|
//This will probably have a callback, so I put it here.
|
|
thisctr.OUTpin=data;
|
|
}
|
|
|
|
void pit_82C54::set_count (counter_type & thisctr, Bit32u data) {
|
|
thisctr.count=data & 0xFFFF;
|
|
set_binary_to_count(thisctr);
|
|
}
|
|
|
|
void pit_82C54::set_count_to_binary(counter_type & thisctr) {
|
|
if(thisctr.bcd_mode) {
|
|
thisctr.count=
|
|
(((thisctr.count_binary/1)%10)<<0) |
|
|
(((thisctr.count_binary/10)%10)<<4) |
|
|
(((thisctr.count_binary/100)%10)<<8) |
|
|
(((thisctr.count_binary/1000)%10)<<12)
|
|
;
|
|
} else {
|
|
thisctr.count=thisctr.count_binary;
|
|
}
|
|
}
|
|
|
|
void pit_82C54::set_binary_to_count(counter_type & thisctr) {
|
|
if(thisctr.bcd_mode) {
|
|
thisctr.count_binary=
|
|
(1*((thisctr.count>>0)&0xF)) +
|
|
(10*((thisctr.count>>4)&0xF)) +
|
|
(100*((thisctr.count>>8)&0xF)) +
|
|
(1000*((thisctr.count>>12)&0xF))
|
|
;
|
|
} else {
|
|
thisctr.count_binary=thisctr.count;
|
|
}
|
|
}
|
|
|
|
void pit_82C54::decrement (counter_type & thisctr) {
|
|
if(!thisctr.count) {
|
|
if(thisctr.bcd_mode) {
|
|
thisctr.count=0x9999;
|
|
thisctr.count_binary=9999;
|
|
} else {
|
|
thisctr.count=0xFFFF;
|
|
thisctr.count_binary=0xFFFF;
|
|
}
|
|
} else {
|
|
thisctr.count_binary--;
|
|
set_count_to_binary(thisctr);
|
|
}
|
|
}
|
|
|
|
void pit_82C54::init (void) {
|
|
Bit8u i;
|
|
|
|
put("PIT81");
|
|
settype(PIT81LOG);
|
|
|
|
for(i=0;i<3;i++) {
|
|
BX_DEBUG(("Setting read_state to LSB"));
|
|
counter[i].read_state=LSByte;
|
|
counter[i].write_state=LSByte;
|
|
counter[i].GATE=1;
|
|
counter[i].OUTpin=1;
|
|
counter[i].triggerGATE=0;
|
|
counter[i].mode=4;
|
|
counter[i].first_pass=0;
|
|
counter[i].bcd_mode=0;
|
|
counter[i].count=0;
|
|
counter[i].count_binary=0;
|
|
counter[i].state_bit_1=0;
|
|
counter[i].state_bit_2=0;
|
|
counter[i].null_count=0;
|
|
counter[i].rw_mode=1;
|
|
counter[i].count_written=1;
|
|
counter[i].count_LSB_latched=0;
|
|
counter[i].count_MSB_latched=0;
|
|
counter[i].status_latched=0;
|
|
counter[i].next_change_time=0;
|
|
}
|
|
seen_problems=0;
|
|
}
|
|
|
|
pit_82C54::pit_82C54 (void) {
|
|
init();
|
|
}
|
|
|
|
void pit_82C54::decrement_multiple(counter_type & thisctr, Bit32u cycles) {
|
|
while(cycles>0) {
|
|
if(cycles<=thisctr.count_binary) {
|
|
thisctr.count_binary-=cycles;
|
|
cycles-=cycles;
|
|
set_count_to_binary(thisctr);
|
|
} else {
|
|
cycles-=(thisctr.count_binary+1);
|
|
thisctr.count_binary-=thisctr.count_binary;
|
|
set_count_to_binary(thisctr);
|
|
decrement(thisctr);
|
|
}
|
|
}
|
|
}
|
|
|
|
void pit_82C54::clock_multiple(Bit8u cnum, Bit32u cycles) {
|
|
if(cnum>MAX_COUNTER) {
|
|
BX_ERROR(("Counter number too high in clock"));
|
|
} else {
|
|
counter_type & thisctr = counter[cnum];
|
|
while(cycles>0) {
|
|
if(thisctr.next_change_time==0) {
|
|
if(thisctr.count_written) {
|
|
switch(thisctr.mode) {
|
|
case 0:
|
|
if(thisctr.GATE && (thisctr.write_state!=MSByte_multiple)) {
|
|
decrement_multiple(thisctr, cycles);
|
|
}
|
|
break;
|
|
case 1:
|
|
decrement_multiple(thisctr, cycles);
|
|
break;
|
|
case 2:
|
|
if( (!thisctr.first_pass) && thisctr.GATE ) {
|
|
decrement_multiple(thisctr, cycles);
|
|
}
|
|
break;
|
|
case 3:
|
|
if( (!thisctr.first_pass) && thisctr.GATE ) {
|
|
decrement_multiple(thisctr, 2*cycles);
|
|
}
|
|
break;
|
|
case 4:
|
|
if(thisctr.GATE) {
|
|
decrement_multiple(thisctr, cycles);
|
|
}
|
|
break;
|
|
case 5:
|
|
decrement_multiple(thisctr, cycles);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
cycles-=cycles;
|
|
} else {
|
|
switch(thisctr.mode) {
|
|
case 0:
|
|
case 1:
|
|
case 2:
|
|
case 4:
|
|
case 5:
|
|
if( thisctr.next_change_time > cycles ) {
|
|
decrement_multiple(thisctr,cycles);
|
|
thisctr.next_change_time-=cycles;
|
|
cycles-=cycles;
|
|
} else {
|
|
decrement_multiple(thisctr,(thisctr.next_change_time-1));
|
|
cycles-=thisctr.next_change_time;
|
|
clock(cnum);
|
|
}
|
|
break;
|
|
case 3:
|
|
if( thisctr.next_change_time > cycles ) {
|
|
decrement_multiple(thisctr,cycles*2);
|
|
thisctr.next_change_time-=cycles;
|
|
cycles-=cycles;
|
|
} else {
|
|
decrement_multiple(thisctr,(thisctr.next_change_time-1)*2);
|
|
cycles-=thisctr.next_change_time;
|
|
clock(cnum);
|
|
}
|
|
break;
|
|
default:
|
|
cycles-=cycles;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#if 0
|
|
print_counter(thisctr);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void pit_82C54::clock(Bit8u cnum) {
|
|
if(cnum>MAX_COUNTER) {
|
|
BX_ERROR(("Counter number too high in clock"));
|
|
} else {
|
|
counter_type & thisctr = counter[cnum];
|
|
switch(thisctr.mode) {
|
|
case 0:
|
|
if(thisctr.count_written) {
|
|
if(thisctr.null_count) {
|
|
set_count(thisctr, thisctr.inlatch);
|
|
if(thisctr.GATE) {
|
|
thisctr.next_change_time=thisctr.count_binary & 0xFFFF;
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
thisctr.null_count=0;
|
|
} else {
|
|
if(thisctr.GATE && (thisctr.write_state!=MSByte_multiple)) {
|
|
decrement(thisctr);
|
|
if(!thisctr.OUTpin) {
|
|
thisctr.next_change_time=thisctr.count_binary & 0xFFFF;
|
|
if(!thisctr.count) {
|
|
set_OUT(thisctr,1);
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0; //if the clock isn't moving.
|
|
}
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0; //default to 0.
|
|
}
|
|
thisctr.triggerGATE=0;
|
|
break;
|
|
case 1:
|
|
if(thisctr.count_written) {
|
|
if(thisctr.triggerGATE) {
|
|
set_count(thisctr, thisctr.inlatch);
|
|
thisctr.next_change_time=thisctr.count_binary & 0xFFFF;
|
|
thisctr.null_count=0;
|
|
set_OUT(thisctr,0);
|
|
if(thisctr.write_state==MSByte_multiple) {
|
|
BX_ERROR(("Undefined behavior when loading a half loaded count."));
|
|
}
|
|
} else {
|
|
decrement(thisctr);
|
|
if(!thisctr.OUTpin) {
|
|
thisctr.next_change_time=thisctr.count_binary & 0xFFFF;
|
|
if(thisctr.count==0) {
|
|
set_OUT(thisctr,1);
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0; //default to 0.
|
|
}
|
|
thisctr.triggerGATE=0;
|
|
break;
|
|
case 2:
|
|
if(thisctr.count_written) {
|
|
if(thisctr.triggerGATE || thisctr.first_pass) {
|
|
set_count(thisctr, thisctr.inlatch);
|
|
thisctr.next_change_time=(thisctr.count_binary-1) & 0xFFFF;
|
|
thisctr.null_count=0;
|
|
if(thisctr.inlatch==1) {
|
|
BX_ERROR(("ERROR: count of 1 is invalid in pit mode 2."));
|
|
}
|
|
if(!thisctr.OUTpin) {
|
|
set_OUT(thisctr,1);
|
|
}
|
|
if(thisctr.write_state==MSByte_multiple) {
|
|
BX_ERROR(("Undefined behavior when loading a half loaded count."));
|
|
}
|
|
thisctr.first_pass=0;
|
|
} else {
|
|
if(thisctr.GATE) {
|
|
decrement(thisctr);
|
|
thisctr.next_change_time=(thisctr.count_binary-1) & 0xFFFF;
|
|
if(thisctr.count==1) {
|
|
thisctr.next_change_time=1;
|
|
set_OUT(thisctr,0);
|
|
thisctr.first_pass=1;
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
thisctr.triggerGATE=0;
|
|
break;
|
|
case 3:
|
|
if(thisctr.count_written) {
|
|
if( (thisctr.triggerGATE || thisctr.first_pass
|
|
|| thisctr.state_bit_2) && thisctr.GATE ) {
|
|
set_count(thisctr, thisctr.inlatch & 0xFFFE);
|
|
thisctr.state_bit_1=thisctr.inlatch & 0x1;
|
|
if( (!thisctr.OUTpin) || (!(thisctr.state_bit_1))) {
|
|
thisctr.next_change_time=((thisctr.count_binary/2)-1) & 0xFFFF;
|
|
} else {
|
|
thisctr.next_change_time=(thisctr.count_binary/2) & 0xFFFF;
|
|
}
|
|
thisctr.null_count=0;
|
|
if(thisctr.inlatch==1) {
|
|
BX_ERROR(("Count of 1 is invalid in pit mode 3."));
|
|
}
|
|
if(!thisctr.OUTpin) {
|
|
set_OUT(thisctr,1);
|
|
} else if(thisctr.OUTpin && !thisctr.first_pass) {
|
|
set_OUT(thisctr,0);
|
|
}
|
|
if(thisctr.write_state==MSByte_multiple) {
|
|
BX_ERROR(("Undefined behavior when loading a half loaded count."));
|
|
}
|
|
thisctr.state_bit_2=0;
|
|
thisctr.first_pass=0;
|
|
} else {
|
|
if(thisctr.GATE) {
|
|
decrement(thisctr);
|
|
decrement(thisctr);
|
|
if( (!thisctr.OUTpin) || (!(thisctr.state_bit_1))) {
|
|
thisctr.next_change_time=((thisctr.count_binary/2)-1) & 0xFFFF;
|
|
} else {
|
|
thisctr.next_change_time=(thisctr.count_binary/2) & 0xFFFF;
|
|
}
|
|
if(thisctr.count==0) {
|
|
thisctr.state_bit_2=1;
|
|
thisctr.next_change_time=1;
|
|
}
|
|
if( (thisctr.count==2) &&
|
|
( (!thisctr.OUTpin) || (!(thisctr.state_bit_1)))
|
|
) {
|
|
thisctr.state_bit_2=1;
|
|
thisctr.next_change_time=1;
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
thisctr.triggerGATE=0;
|
|
break;
|
|
case 4:
|
|
if(thisctr.count_written) {
|
|
if(!thisctr.OUTpin) {
|
|
set_OUT(thisctr,1);
|
|
}
|
|
if(thisctr.null_count) {
|
|
set_count(thisctr, thisctr.inlatch);
|
|
if(thisctr.GATE) {
|
|
thisctr.next_change_time=thisctr.count_binary & 0xFFFF;
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
thisctr.null_count=0;
|
|
if(thisctr.write_state==MSByte_multiple) {
|
|
BX_ERROR(("Undefined behavior when loading a half loaded count."));
|
|
}
|
|
thisctr.first_pass=1;
|
|
} else {
|
|
if(thisctr.GATE) {
|
|
decrement(thisctr);
|
|
if(thisctr.first_pass) {
|
|
thisctr.next_change_time=thisctr.count_binary & 0xFFFF;
|
|
if(!thisctr.count) {
|
|
set_OUT(thisctr,0);
|
|
thisctr.next_change_time=1;
|
|
thisctr.first_pass=0;
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
thisctr.triggerGATE=0;
|
|
break;
|
|
case 5:
|
|
if(thisctr.count_written) {
|
|
if(!thisctr.OUTpin) {
|
|
set_OUT(thisctr,1);
|
|
}
|
|
if(thisctr.triggerGATE) {
|
|
set_count(thisctr, thisctr.inlatch);
|
|
thisctr.next_change_time=thisctr.count_binary & 0xFFFF;
|
|
thisctr.null_count=0;
|
|
if(thisctr.write_state==MSByte_multiple) {
|
|
BX_ERROR(("Undefined behavior when loading a half loaded count."));
|
|
}
|
|
thisctr.first_pass=1;
|
|
} else {
|
|
decrement(thisctr);
|
|
if(thisctr.first_pass) {
|
|
thisctr.next_change_time=thisctr.count_binary & 0xFFFF;
|
|
if(!thisctr.count) {
|
|
set_OUT(thisctr,0);
|
|
thisctr.next_change_time=1;
|
|
thisctr.first_pass=0;
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
thisctr.triggerGATE=0;
|
|
break;
|
|
default:
|
|
BX_ERROR(("Mode not implemented."));
|
|
thisctr.next_change_time=0;
|
|
thisctr.triggerGATE=0;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void pit_82C54::clock_all(Bit32u cycles) {
|
|
BX_DEBUG(("clock_all: cycles=%d",cycles));
|
|
clock_multiple(0,cycles);
|
|
clock_multiple(1,cycles);
|
|
clock_multiple(2,cycles);
|
|
}
|
|
|
|
Bit8u pit_82C54::read(Bit8u address) {
|
|
if(address>MAX_ADDRESS) {
|
|
BX_ERROR(("Counter address incorrect in data read."));
|
|
} else if(address==CONTROL_ADDRESS) {
|
|
BX_DEBUG(("PIT Read: Control Word Register."));
|
|
//Read from control word register;
|
|
/* This might be okay. If so, 0 seems the most logical
|
|
* return value from looking at the docs.
|
|
*/
|
|
BX_ERROR(("Read from control word register not defined."));
|
|
return 0;
|
|
} else {
|
|
//Read from a counter;
|
|
BX_DEBUG(("PIT Read: Counter %d.",address));
|
|
counter_type & thisctr=counter[address];
|
|
if(thisctr.status_latched) {
|
|
//Latched Status Read;
|
|
if(thisctr.count_MSB_latched &&
|
|
(thisctr.read_state==MSByte_multiple) ) {
|
|
BX_ERROR(("Undefined output when status latched and count half read."));
|
|
} else {
|
|
thisctr.status_latched=0;
|
|
return thisctr.status_latch;
|
|
}
|
|
} else {
|
|
//Latched Count Read;
|
|
if(thisctr.count_LSB_latched) {
|
|
//Read Least Significant Byte;
|
|
if(thisctr.read_state==LSByte_multiple) {
|
|
BX_DEBUG(("Setting read_state to MSB_mult"));
|
|
thisctr.read_state=MSByte_multiple;
|
|
}
|
|
thisctr.count_LSB_latched=0;
|
|
return (thisctr.outlatch & 0xFF);
|
|
} else if(thisctr.count_MSB_latched) {
|
|
//Read Most Significant Byte;
|
|
if(thisctr.read_state==MSByte_multiple) {
|
|
BX_DEBUG(("Setting read_state to LSB_mult"));
|
|
thisctr.read_state=LSByte_multiple;
|
|
}
|
|
thisctr.count_MSB_latched=0;
|
|
return ((thisctr.outlatch>>8) & 0xFF);
|
|
} else {
|
|
//Unlatched Count Read;
|
|
if(!(thisctr.read_state & 0x1)) {
|
|
//Read Least Significant Byte;
|
|
if(thisctr.read_state==LSByte_multiple) {
|
|
thisctr.read_state=MSByte_multiple;
|
|
BX_DEBUG(("Setting read_state to MSB_mult"));
|
|
}
|
|
return (thisctr.count & 0xFF);
|
|
} else {
|
|
//Read Most Significant Byte;
|
|
if(thisctr.read_state==MSByte_multiple) {
|
|
BX_DEBUG(("Setting read_state to LSB_mult"));
|
|
thisctr.read_state=LSByte_multiple;
|
|
}
|
|
return ((thisctr.count>>8) & 0xFF);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
//Should only get here on errors;
|
|
return 0;
|
|
}
|
|
|
|
void pit_82C54::write(Bit8u address, Bit8u data) {
|
|
if(address>MAX_ADDRESS) {
|
|
BX_ERROR(("Counter address incorrect in data write."));
|
|
} else if(address==CONTROL_ADDRESS) {
|
|
Bit8u SC, RW, M, BCD;
|
|
controlword=data;
|
|
BX_DEBUG(("Control Word Write."));
|
|
SC = (controlword>>6) & 0x3;
|
|
RW = (controlword>>4) & 0x3;
|
|
M = (controlword>>1) & 0x7;
|
|
BCD = controlword & 0x1;
|
|
if(SC == 3) {
|
|
//READ_BACK command;
|
|
int i;
|
|
BX_DEBUG(("READ_BACK command."));
|
|
for(i=0;i<=MAX_COUNTER;i++) {
|
|
if((M>>i) & 0x1) {
|
|
//If we are using this counter;
|
|
counter_type & thisctr=counter[i];
|
|
if(!((controlword>>5) & 1)) {
|
|
//Latch Count;
|
|
latch_counter(thisctr);
|
|
}
|
|
if(!((controlword>>4) & 1)) {
|
|
//Latch Status;
|
|
if(thisctr.status_latched) {
|
|
//Do nothing because latched status has not been read.;
|
|
} else {
|
|
thisctr.status_latch=
|
|
((thisctr.OUTpin & 0x1) << 7) |
|
|
((thisctr.null_count & 0x1) << 6) |
|
|
((thisctr.rw_mode & 0x3) << 4) |
|
|
((thisctr.mode & 0x7) << 1) |
|
|
(thisctr.bcd_mode&0x1)
|
|
;
|
|
thisctr.status_latched=1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
counter_type & thisctr = counter[SC];
|
|
if(!RW) {
|
|
//Counter Latch command;
|
|
BX_DEBUG(("Counter Latch command. SC=%d",SC));
|
|
latch_counter(thisctr);
|
|
} else {
|
|
//Counter Program Command;
|
|
BX_DEBUG(("Counter Program command. SC=%d, RW=%d, M=%d, BCD=%d",SC,RW,M,BCD));
|
|
thisctr.null_count=1;
|
|
thisctr.count_LSB_latched=0;
|
|
thisctr.count_MSB_latched=0;
|
|
thisctr.status_latched=0;
|
|
thisctr.inlatch=0;
|
|
thisctr.count_written=0;
|
|
thisctr.first_pass=1;
|
|
thisctr.rw_mode=RW;
|
|
thisctr.bcd_mode=BCD;
|
|
thisctr.mode=M;
|
|
switch(RW) {
|
|
case 0x1:
|
|
BX_DEBUG(("Setting read_state to LSB"));
|
|
thisctr.read_state=LSByte;
|
|
thisctr.write_state=LSByte;
|
|
break;
|
|
case 0x2:
|
|
BX_DEBUG(("Setting read_state to MSB"));
|
|
thisctr.read_state=MSByte;
|
|
thisctr.write_state=MSByte;
|
|
break;
|
|
case 0x3:
|
|
BX_DEBUG(("Setting read_state to LSB_mult"));
|
|
thisctr.read_state=LSByte_multiple;
|
|
thisctr.write_state=LSByte_multiple;
|
|
break;
|
|
default:
|
|
BX_ERROR(("RW field invalid in control word write."));
|
|
break;
|
|
}
|
|
//All modes except mode 0 have initial output of 1.;
|
|
if(M) {
|
|
set_OUT(thisctr, 1);
|
|
} else {
|
|
set_OUT(thisctr, 0);
|
|
}
|
|
thisctr.next_change_time=0;
|
|
}
|
|
}
|
|
} else {
|
|
//Write to counter initial value.
|
|
counter_type & thisctr = counter[address];
|
|
BX_DEBUG(("Write Initial Count: counter=%d, count=%d",address,data));
|
|
switch(thisctr.write_state) {
|
|
case LSByte_multiple:
|
|
thisctr.inlatch=(thisctr.inlatch & (0xFF<<8)) | data;
|
|
thisctr.write_state=MSByte_multiple;
|
|
break;
|
|
case LSByte:
|
|
thisctr.inlatch=(thisctr.inlatch & (0xFF<<8)) | data;
|
|
thisctr.null_count=1;
|
|
thisctr.count_written=1;
|
|
break;
|
|
case MSByte_multiple:
|
|
thisctr.write_state=LSByte_multiple;
|
|
case MSByte: //shared between MSB_multiple and MSByte
|
|
thisctr.inlatch=(thisctr.inlatch & 0xFF) | (data<<8);
|
|
thisctr.null_count=1;
|
|
thisctr.count_written=1;
|
|
break;
|
|
default:
|
|
BX_ERROR(("write counter in invalid write state."));
|
|
break;
|
|
}
|
|
switch(thisctr.mode) {
|
|
case 0:
|
|
if(thisctr.write_state==MSByte_multiple) {
|
|
set_OUT(thisctr,0);
|
|
}
|
|
thisctr.next_change_time=1;
|
|
break;
|
|
case 1:
|
|
if(thisctr.triggerGATE) { //for initial writes, if already saw trigger.
|
|
thisctr.next_change_time=1;
|
|
} //Otherwise, no change.
|
|
break;
|
|
case 6:
|
|
case 2:
|
|
thisctr.next_change_time=1; //FIXME: this could be loosened.
|
|
break;
|
|
case 7:
|
|
case 3:
|
|
thisctr.next_change_time=1; //FIXME: this could be loosened.
|
|
break;
|
|
case 4:
|
|
thisctr.next_change_time=1;
|
|
break;
|
|
case 5:
|
|
if(thisctr.triggerGATE) { //for initial writes, if already saw trigger.
|
|
thisctr.next_change_time=1;
|
|
} //Otherwise, no change.
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void pit_82C54::set_GATE(Bit8u cnum, bool data) {
|
|
if(cnum>MAX_COUNTER) {
|
|
BX_ERROR(("Counter number incorrect in 82C54 set_GATE"));
|
|
} else {
|
|
counter_type & thisctr = counter[cnum];
|
|
if(!( (thisctr.GATE&&data) || (!(thisctr.GATE||data)) )) {
|
|
BX_INFO(("Changing GATE %d to: %d",cnum,data));
|
|
thisctr.GATE=data;
|
|
if(thisctr.GATE) {
|
|
thisctr.triggerGATE=1;
|
|
}
|
|
switch(thisctr.mode) {
|
|
case 0:
|
|
if(data && thisctr.count_written) {
|
|
if(thisctr.null_count) {
|
|
thisctr.next_change_time=1;
|
|
} else {
|
|
if( (!thisctr.OUTpin) &&
|
|
(thisctr.write_state!=MSByte_multiple)
|
|
) {
|
|
thisctr.next_change_time=thisctr.count_binary & 0xFFFF;
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
}
|
|
} else {
|
|
if(thisctr.null_count) {
|
|
thisctr.next_change_time=1;
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
}
|
|
break;
|
|
case 1:
|
|
if(data && thisctr.count_written) { //only triggers cause a change.
|
|
thisctr.next_change_time=1;
|
|
}
|
|
break;
|
|
case 2:
|
|
if(!data) {
|
|
set_OUT(thisctr,1);
|
|
thisctr.next_change_time=0;
|
|
} else {
|
|
if(thisctr.count_written) {
|
|
thisctr.next_change_time=1;
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
}
|
|
break;
|
|
case 3:
|
|
if(!data) {
|
|
set_OUT(thisctr,1);
|
|
thisctr.first_pass=1;
|
|
thisctr.next_change_time=0;
|
|
} else {
|
|
if(thisctr.count_written) {
|
|
thisctr.next_change_time=1;
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
}
|
|
break;
|
|
case 4:
|
|
if(!thisctr.OUTpin || thisctr.null_count) {
|
|
thisctr.next_change_time=1;
|
|
} else {
|
|
if(data && thisctr.count_written) {
|
|
if(thisctr.first_pass) {
|
|
thisctr.next_change_time=thisctr.count_binary & 0xFFFF;
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
} else {
|
|
thisctr.next_change_time=0;
|
|
}
|
|
}
|
|
break;
|
|
case 5:
|
|
if(data && thisctr.count_written) { //only triggers cause a change.
|
|
thisctr.next_change_time=1;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
bool pit_82C54::read_OUT(Bit8u cnum) {
|
|
if(cnum>MAX_COUNTER) {
|
|
BX_ERROR(("Counter number incorrect in 82C54 read_OUT"));
|
|
return 0;
|
|
} else {
|
|
return counter[cnum].OUTpin;
|
|
}
|
|
}
|
|
|
|
bool pit_82C54::read_GATE(Bit8u cnum) {
|
|
if(cnum>MAX_COUNTER) {
|
|
BX_ERROR(("Counter number incorrect in 82C54 read_GATE"));
|
|
return 0;
|
|
} else {
|
|
return counter[cnum].GATE;
|
|
}
|
|
}
|
|
|
|
Bit32u pit_82C54::get_clock_event_time(Bit8u cnum) {
|
|
if(cnum>MAX_COUNTER) {
|
|
BX_ERROR(("Counter number incorrect in 82C54 read_GATE"));
|
|
return 0;
|
|
} else {
|
|
return counter[cnum].next_change_time;
|
|
}
|
|
}
|
|
|
|
Bit32u pit_82C54::get_next_event_time(void) {
|
|
Bit32u out;
|
|
Bit32u time0=get_clock_event_time(0);
|
|
Bit32u time1=get_clock_event_time(1);
|
|
Bit32u time2=get_clock_event_time(2);
|
|
|
|
out=time0;
|
|
if(time1 && (time1<out))
|
|
out=time1;
|
|
if(time2 && (time2<out))
|
|
out=time2;
|
|
return out;
|
|
}
|