Bochs/bochs/iodev/usb_common.h
Volker Ruppert c2d0c207f7 - preparing Bochs for experimental USB xHCI support (written by Ben Lunt) TODO list:
- add sources (update in progress)
  - update configure script
  - initialize new USB devices member 'max_packet_size' (need help from Ben)
2011-07-04 19:42:47 +00:00

205 lines
5.9 KiB
C++

/////////////////////////////////////////////////////////////////////////
// $Id$
/////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2009 Benjamin D Lunt (fys at frontiernet net)
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
//
/////////////////////////////////////////////////////////////////////////
#ifndef BX_IODEV_USB_COMMON_H
#define BX_IODEV_USB_COMMON_H
#define USB_TOKEN_IN 0x69
#define USB_TOKEN_OUT 0xE1
#define USB_TOKEN_SETUP 0x2D
#define USB_MSG_ATTACH 0x100
#define USB_MSG_DETACH 0x101
#define USB_MSG_RESET 0x102
#define USB_RET_NODEV (-1)
#define USB_RET_NAK (-2)
#define USB_RET_STALL (-3)
#define USB_RET_BABBLE (-4)
#define USB_RET_ASYNC (-5)
#define USB_SPEED_LOW 0
#define USB_SPEED_FULL 1
#define USB_SPEED_HIGH 2
#define USB_SPEED_SUPER 3
#define USB_STATE_NOTATTACHED 0
#define USB_STATE_ATTACHED 1
//#define USB_STATE_POWERED 2
#define USB_STATE_DEFAULT 3
#define USB_STATE_ADDRESS 4
#define USB_STATE_CONFIGURED 5
#define USB_STATE_SUSPENDED 6
#define USB_DIR_OUT 0
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_CLASS (0x01 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_TYPE_RESERVED (0x03 << 5)
#define USB_RECIP_MASK 0x1f
#define USB_RECIP_DEVICE 0x00
#define USB_RECIP_INTERFACE 0x01
#define USB_RECIP_ENDPOINT 0x02
#define USB_RECIP_OTHER 0x03
#define DeviceRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
#define DeviceOutRequest ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
#define InterfaceRequest \
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
#define InterfaceInClassRequest \
((USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE)<<8)
#define InterfaceOutRequest \
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
#define InterfaceOutClassRequest \
((USB_DIR_OUT|USB_TYPE_CLASS|USB_RECIP_INTERFACE)<<8)
#define EndpointRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
#define EndpointOutRequest \
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
#define USB_REQ_GET_STATUS 0x00
#define USB_REQ_CLEAR_FEATURE 0x01
#define USB_REQ_SET_FEATURE 0x03
#define USB_REQ_SET_ADDRESS 0x05
#define USB_REQ_GET_DESCRIPTOR 0x06
#define USB_REQ_SET_DESCRIPTOR 0x07
#define USB_REQ_GET_CONFIGURATION 0x08
#define USB_REQ_SET_CONFIGURATION 0x09
#define USB_REQ_GET_INTERFACE 0x0A
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
#define USB_DEVICE_SELF_POWERED 0
#define USB_DEVICE_REMOTE_WAKEUP 1
// USB 1.1
#define USB_DT_DEVICE 0x01
#define USB_DT_CONFIG 0x02
#define USB_DT_STRING 0x03
#define USB_DT_INTERFACE 0x04
#define USB_DT_ENDPOINT 0x05
// USB 2.0
#define USB_DT_DEVICE_QUALIFIER 0x06
#define USB_DT_OTHER_SPEED_CONFIG 0x07
#define USB_DT_INTERFACE_POWER 0x08
class usb_device_c;
struct USBPacket {
int pid;
Bit8u devaddr;
Bit8u devep;
Bit8u *data;
int len;
usb_device_c *dev;
};
enum usbdev_type {
USB_DEV_TYPE_NONE=0,
USB_DEV_TYPE_MOUSE,
USB_DEV_TYPE_TABLET,
USB_DEV_TYPE_KEYPAD,
USB_DEV_TYPE_DISK,
USB_DEV_TYPE_CDROM,
USB_DEV_TYPE_HUB,
USB_DEV_TYPE_PRINTER
};
class bx_usb_devctl_c : public bx_usb_devctl_stub_c {
public:
bx_usb_devctl_c() {}
virtual ~bx_usb_devctl_c() {}
virtual int init_device(bx_list_c *portconf, logfunctions *hub, void **dev, bx_list_c *sr_list);
virtual void usb_send_msg(void *dev, int msg);
private:
void parse_port_options(usb_device_c *dev, bx_list_c *portconf);
};
class usb_device_c : public logfunctions {
public:
usb_device_c(void);
virtual ~usb_device_c() {}
virtual bx_bool init() {return 1;}
virtual const char* get_info() {return NULL;}
virtual int handle_packet(USBPacket *p);
virtual void handle_reset() {}
virtual int handle_control(int request, int value, int index, int length, Bit8u *data) {return 0;}
virtual int handle_data(USBPacket *p) {return 0;}
void register_state(bx_list_c *parent);
virtual void register_state_specific(bx_list_c *parent) {}
virtual void after_restore_state() {}
virtual void cancel_packet(USBPacket *p) {}
virtual bx_bool set_option(const char *option) {return 0;}
virtual void runtime_config() {}
bx_bool get_connected() {return d.connected;}
usbdev_type get_type() {return d.type;}
int get_maxspeed() {return d.maxspeed;}
int get_speed() {return d.speed;}
void set_speed(int speed) {d.speed = speed;}
Bit8u get_address() {return d.addr;}
int get_max_packet_size() {return d.max_packet_size;}
void usb_send_msg(int msg);
protected:
struct {
enum usbdev_type type;
bx_bool connected;
int maxspeed;
int speed;
Bit8u addr;
Bit8u config;
char devname[32];
int state;
Bit8u setup_buf[8];
Bit8u data_buf[1024];
int remote_wakeup;
int setup_state;
int setup_len;
int setup_index;
int max_packet_size;
bx_bool stall;
} d;
void usb_dump_packet(Bit8u *data, unsigned size);
int set_usb_string(Bit8u *buf, const char *str);
};
static BX_CPP_INLINE void usb_defer_packet(USBPacket *p, usb_device_c *dev)
{
p->dev = dev;
}
static BX_CPP_INLINE void usb_cancel_packet(USBPacket *p)
{
p->dev->cancel_packet(p);
}
#endif