1014 lines
36 KiB
C++
1014 lines
36 KiB
C++
/////////////////////////////////////////////////////////////////////////
|
|
// $Id$
|
|
/////////////////////////////////////////////////////////////////////////
|
|
//
|
|
// Copyright (C) 2009-2017 Benjamin D Lunt (fys [at] fysnet [dot] net)
|
|
// 2009-2018 The Bochs Project
|
|
//
|
|
// This library is free software; you can redistribute it and/or
|
|
// modify it under the terms of the GNU Lesser General Public
|
|
// License as published by the Free Software Foundation; either
|
|
// version 2 of the License, or (at your option) any later version.
|
|
//
|
|
// This library is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
// Lesser General Public License for more details.
|
|
//
|
|
// You should have received a copy of the GNU Lesser General Public
|
|
// License along with this library; if not, write to the Free Software
|
|
// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
/////////////////////////////////////////////////////////////////////////
|
|
|
|
// USB UHCI adapter core
|
|
// - PIIX3/PIIX4 function 2
|
|
// - ICH4 EHCI function 0, 1 and 2
|
|
|
|
/* Notes by Ben Lunt:
|
|
- My purpose of coding this emulation was/is to learn about the USB.
|
|
It has been a challenge, but I have learned a lot.
|
|
- 31 July 2006:
|
|
I now have a Beagle USB Protocol Analyzer from Total Phase for my research.
|
|
(http://www.totalphase.com/products/beagle-usb12/)
|
|
With this device, I plan on doing a lot of research and development to get this
|
|
code to a state where it is actually very useful. I plan on adding support
|
|
of many "plug-in" type modules so that you can simply add a plug-in for your
|
|
specific device without having to modify the root code.
|
|
I hope to have some working code to upload to the CVS as soon as possible.
|
|
Thanks to Total Phase for their help in my research and the development of
|
|
this project.
|
|
*/
|
|
|
|
// Define BX_PLUGGABLE in files that can be compiled into plugins. For
|
|
// platforms that require a special tag on exported symbols, BX_PLUGGABLE
|
|
// is used to know when we are exporting symbols and when we are importing.
|
|
#define BX_PLUGGABLE
|
|
|
|
#include "iodev.h"
|
|
|
|
#if BX_SUPPORT_PCI && BX_SUPPORT_USB_UHCI
|
|
|
|
#include "pci.h"
|
|
#include "usb_common.h"
|
|
#include "uhci_core.h"
|
|
|
|
#define LOG_THIS
|
|
|
|
//#define UHCI_FULL_DEBUG
|
|
|
|
const Bit8u uhci_iomask[32] = {2, 1, 2, 1, 2, 1, 2, 0, 4, 0, 0, 0, 1, 0, 0, 0,
|
|
3, 1, 3, 1, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
|
|
|
// the device object
|
|
|
|
bx_uhci_core_c::bx_uhci_core_c()
|
|
{
|
|
put("uhci_core", "UHCIC");
|
|
memset((void*)&hub, 0, sizeof(bx_uhci_core_t));
|
|
hub.timer_index = BX_NULL_TIMER_HANDLE;
|
|
}
|
|
|
|
bx_uhci_core_c::~bx_uhci_core_c()
|
|
{
|
|
BX_DEBUG(("Exit"));
|
|
}
|
|
|
|
void bx_uhci_core_c::init_uhci(Bit8u devfunc, Bit16u devid, Bit8u headt, Bit8u intp)
|
|
{
|
|
// Call our timer routine every 1mS (1,000uS)
|
|
// Continuous and active
|
|
hub.timer_index =
|
|
DEV_register_timer(this, uhci_timer_handler, 1000, 1,1, "usb.timer");
|
|
|
|
hub.devfunc = devfunc;
|
|
DEV_register_pci_handlers(this, &hub.devfunc, BX_PLUGIN_USB_UHCI,
|
|
"USB UHCI");
|
|
|
|
// initialize readonly registers
|
|
init_pci_conf(0x8086, devid, 0x01, 0x0c0300, headt, intp);
|
|
init_bar_io(4, 32, read_handler, write_handler, &uhci_iomask[0]);
|
|
|
|
for (int i=0; i<USB_UHCI_PORTS; i++) {
|
|
hub.usb_port[i].device = NULL;
|
|
}
|
|
packets = NULL;
|
|
}
|
|
|
|
void bx_uhci_core_c::reset_uhci(unsigned type)
|
|
{
|
|
unsigned i, j;
|
|
|
|
if (type == BX_RESET_HARDWARE) {
|
|
static const struct reset_vals_t {
|
|
unsigned addr;
|
|
unsigned char val;
|
|
} reset_vals[] = {
|
|
{ 0x04, 0x05 }, { 0x05, 0x00 }, // command_io
|
|
{ 0x06, 0x80 }, { 0x07, 0x02 }, // status
|
|
{ 0x0d, 0x20 }, // bus latency
|
|
// address space 0x20 - 0x23
|
|
{ 0x20, 0x01 }, { 0x21, 0x00 },
|
|
{ 0x22, 0x00 }, { 0x23, 0x00 },
|
|
{ 0x3c, 0x00 }, // IRQ
|
|
{ 0x60, 0x10 }, // USB revision 1.0
|
|
{ 0x6a, 0x01 }, // USB clock
|
|
{ 0xc1, 0x20 } // PIRQ enable
|
|
|
|
};
|
|
for (i = 0; i < sizeof(reset_vals) / sizeof(*reset_vals); ++i) {
|
|
pci_conf[reset_vals[i].addr] = reset_vals[i].val;
|
|
}
|
|
}
|
|
|
|
// reset locals
|
|
busy = 0;
|
|
global_reset = 0;
|
|
|
|
// Put the USB registers into their RESET state
|
|
hub.usb_command.max_packet_size = 0;
|
|
hub.usb_command.configured = 0;
|
|
hub.usb_command.debug = 0;
|
|
hub.usb_command.resume = 0;
|
|
hub.usb_command.suspend = 0;
|
|
hub.usb_command.reset = 0;
|
|
hub.usb_command.host_reset = 0;
|
|
hub.usb_command.schedule = 0;
|
|
hub.usb_status.error_interrupt = 0;
|
|
hub.usb_status.host_error = 0;
|
|
hub.usb_status.host_halted = 0;
|
|
hub.usb_status.interrupt = 0;
|
|
hub.usb_status.status2 = 0;
|
|
hub.usb_status.pci_error = 0;
|
|
hub.usb_status.resume = 0;
|
|
hub.usb_enable.short_packet = 0;
|
|
hub.usb_enable.on_complete = 0;
|
|
hub.usb_enable.resume = 0;
|
|
hub.usb_enable.timeout_crc = 0;
|
|
hub.usb_frame_num.frame_num = 0x0000;
|
|
hub.usb_frame_base.frame_base = 0x00000000;
|
|
hub.usb_sof.sof_timing = 0x40;
|
|
for (j=0; j<USB_UHCI_PORTS; j++) {
|
|
hub.usb_port[j].connect_changed = 0;
|
|
hub.usb_port[j].line_dminus = 0;
|
|
hub.usb_port[j].line_dplus = 0;
|
|
hub.usb_port[j].low_speed = 0;
|
|
hub.usb_port[j].reset = 0;
|
|
hub.usb_port[j].resume = 0;
|
|
hub.usb_port[j].suspend = 0;
|
|
hub.usb_port[j].enabled = 0;
|
|
hub.usb_port[j].able_changed = 0;
|
|
hub.usb_port[j].status = 0;
|
|
if (hub.usb_port[j].device != NULL) {
|
|
set_connect_status(j, hub.usb_port[j].device->get_type(), 1);
|
|
}
|
|
}
|
|
while (packets != NULL) {
|
|
usb_cancel_packet(&packets->packet);
|
|
remove_async_packet(&packets, packets);
|
|
}
|
|
}
|
|
|
|
void bx_uhci_core_c::register_state(bx_list_c *parent)
|
|
{
|
|
unsigned j;
|
|
char portnum[8];
|
|
bx_list_c *hub1, *usb_cmd, *usb_st, *usb_en, *port;
|
|
|
|
bx_list_c *list = new bx_list_c(parent, "usb_uhci", "USB UHCI State");
|
|
hub1 = new bx_list_c(list, "hub");
|
|
usb_cmd = new bx_list_c(hub1, "usb_command");
|
|
BXRS_PARAM_BOOL(usb_cmd, max_packet_size, hub.usb_command.max_packet_size);
|
|
BXRS_PARAM_BOOL(usb_cmd, configured, hub.usb_command.configured);
|
|
BXRS_PARAM_BOOL(usb_cmd, debug, hub.usb_command.debug);
|
|
BXRS_PARAM_BOOL(usb_cmd, resume, hub.usb_command.resume);
|
|
BXRS_PARAM_BOOL(usb_cmd, suspend, hub.usb_command.suspend);
|
|
BXRS_PARAM_BOOL(usb_cmd, reset, hub.usb_command.reset);
|
|
BXRS_PARAM_BOOL(usb_cmd, host_reset, hub.usb_command.host_reset);
|
|
BXRS_PARAM_BOOL(usb_cmd, schedule, hub.usb_command.schedule);
|
|
usb_st = new bx_list_c(hub1, "usb_status");
|
|
BXRS_PARAM_BOOL(usb_st, host_halted, hub.usb_status.host_halted);
|
|
BXRS_PARAM_BOOL(usb_st, host_error, hub.usb_status.host_error);
|
|
BXRS_PARAM_BOOL(usb_st, pci_error, hub.usb_status.pci_error);
|
|
BXRS_PARAM_BOOL(usb_st, resume, hub.usb_status.resume);
|
|
BXRS_PARAM_BOOL(usb_st, error_interrupt, hub.usb_status.error_interrupt);
|
|
BXRS_PARAM_BOOL(usb_st, interrupt, hub.usb_status.interrupt);
|
|
BXRS_HEX_PARAM_FIELD(usb_st, status2, hub.usb_status.status2);
|
|
usb_en = new bx_list_c(hub1, "usb_enable");
|
|
BXRS_PARAM_BOOL(usb_en, short_packet, hub.usb_enable.short_packet);
|
|
BXRS_PARAM_BOOL(usb_en, on_complete, hub.usb_enable.on_complete);
|
|
BXRS_PARAM_BOOL(usb_en, resume, hub.usb_enable.resume);
|
|
BXRS_PARAM_BOOL(usb_en, timeout_crc, hub.usb_enable.timeout_crc);
|
|
BXRS_HEX_PARAM_FIELD(hub1, frame_num, hub.usb_frame_num.frame_num);
|
|
BXRS_HEX_PARAM_FIELD(hub1, frame_base, hub.usb_frame_base.frame_base);
|
|
BXRS_HEX_PARAM_FIELD(hub1, sof_timing, hub.usb_sof.sof_timing);
|
|
for (j=0; j<USB_UHCI_PORTS; j++) {
|
|
sprintf(portnum, "port%d", j+1);
|
|
port = new bx_list_c(hub1, portnum);
|
|
BXRS_PARAM_BOOL(port, suspend, hub.usb_port[j].suspend);
|
|
BXRS_PARAM_BOOL(port, reset, hub.usb_port[j].reset);
|
|
BXRS_PARAM_BOOL(port, low_speed, hub.usb_port[j].low_speed);
|
|
BXRS_PARAM_BOOL(port, resume, hub.usb_port[j].resume);
|
|
BXRS_PARAM_BOOL(port, line_dminus, hub.usb_port[j].line_dminus);
|
|
BXRS_PARAM_BOOL(port, line_dplus, hub.usb_port[j].line_dplus);
|
|
BXRS_PARAM_BOOL(port, able_changed, hub.usb_port[j].able_changed);
|
|
BXRS_PARAM_BOOL(port, enabled, hub.usb_port[j].enabled);
|
|
BXRS_PARAM_BOOL(port, connect_changed, hub.usb_port[j].connect_changed);
|
|
BXRS_PARAM_BOOL(port, status, hub.usb_port[j].status);
|
|
// empty list for USB device state
|
|
new bx_list_c(port, "device");
|
|
}
|
|
// TODO: handle async packets
|
|
register_pci_state(hub1);
|
|
|
|
BXRS_PARAM_BOOL(list, busy, busy);
|
|
BXRS_DEC_PARAM_FIELD(list, global_reset, global_reset);
|
|
}
|
|
|
|
void bx_uhci_core_c::after_restore_state(void)
|
|
{
|
|
bx_pci_device_c::after_restore_pci_state(NULL);
|
|
for (int j=0; j<USB_UHCI_PORTS; j++) {
|
|
if (hub.usb_port[j].device != NULL) {
|
|
hub.usb_port[j].device->after_restore_state();
|
|
}
|
|
}
|
|
}
|
|
|
|
void bx_uhci_core_c::update_irq()
|
|
{
|
|
bx_bool level;
|
|
|
|
if (((hub.usb_status.status2 & 1) && (hub.usb_enable.on_complete)) ||
|
|
((hub.usb_status.status2 & 2) && (hub.usb_enable.short_packet)) ||
|
|
((hub.usb_status.error_interrupt) && (hub.usb_enable.timeout_crc)) ||
|
|
((hub.usb_status.resume) && (hub.usb_enable.resume)) ||
|
|
(hub.usb_status.pci_error) ||
|
|
(hub.usb_status.host_error)) {
|
|
level = 1;
|
|
} else {
|
|
level = 0;
|
|
}
|
|
DEV_pci_set_irq(hub.devfunc, pci_conf[0x3d], level);
|
|
}
|
|
|
|
// static IO port read callback handler
|
|
// redirects to non-static class handler to avoid virtual functions
|
|
|
|
Bit32u bx_uhci_core_c::read_handler(void *this_ptr, Bit32u address, unsigned io_len)
|
|
{
|
|
bx_uhci_core_c *class_ptr = (bx_uhci_core_c *) this_ptr;
|
|
return class_ptr->read(address, io_len);
|
|
}
|
|
|
|
Bit32u bx_uhci_core_c::read(Bit32u address, unsigned io_len)
|
|
{
|
|
Bit32u val = 0x0;
|
|
Bit8u offset,port;
|
|
|
|
offset = address - pci_bar[4].addr;
|
|
|
|
switch (offset) {
|
|
case 0x00: // command register (16-bit)
|
|
val = hub.usb_command.max_packet_size << 7
|
|
| hub.usb_command.configured << 6
|
|
| hub.usb_command.debug << 5
|
|
| hub.usb_command.resume << 4
|
|
| hub.usb_command.suspend << 3
|
|
| hub.usb_command.reset << 2
|
|
| hub.usb_command.host_reset << 1
|
|
| hub.usb_command.schedule;
|
|
break;
|
|
|
|
case 0x02: // status register (16-bit)
|
|
val = hub.usb_status.host_halted << 5
|
|
| hub.usb_status.host_error << 4
|
|
| hub.usb_status.pci_error << 3
|
|
| hub.usb_status.resume << 2
|
|
| hub.usb_status.error_interrupt << 1
|
|
| hub.usb_status.interrupt;
|
|
break;
|
|
|
|
case 0x04: // interrupt enable register (16-bit)
|
|
val = hub.usb_enable.short_packet << 3
|
|
| hub.usb_enable.on_complete << 2
|
|
| hub.usb_enable.resume << 1
|
|
| hub.usb_enable.timeout_crc;
|
|
break;
|
|
|
|
case 0x06: // frame number register (16-bit)
|
|
val = hub.usb_frame_num.frame_num;
|
|
break;
|
|
|
|
case 0x08: // frame base register (32-bit)
|
|
val = hub.usb_frame_base.frame_base;
|
|
break;
|
|
|
|
case 0x0C: // start of Frame Modify register (8-bit)
|
|
val = hub.usb_sof.sof_timing;
|
|
break;
|
|
|
|
case 0x14: // port #3 non existant, but linux systems check it to see if there are more than 2
|
|
BX_ERROR(("read from non existant offset 0x14 (port #3)"));
|
|
val = 0xFF7F;
|
|
break;
|
|
|
|
case 0x10: // port #1
|
|
case 0x11:
|
|
case 0x12: // port #2
|
|
case 0x13:
|
|
port = (offset & 0x0F) >> 1;
|
|
if (port < USB_UHCI_PORTS) {
|
|
val = hub.usb_port[port].suspend << 12
|
|
| 1 << 10 // some Root Hubs have bit 10 set ?????
|
|
| hub.usb_port[port].reset << 9
|
|
| hub.usb_port[port].low_speed << 8
|
|
| 1 << 7
|
|
| hub.usb_port[port].resume << 6
|
|
| hub.usb_port[port].line_dminus << 5
|
|
| hub.usb_port[port].line_dplus << 4
|
|
| hub.usb_port[port].able_changed << 3
|
|
| hub.usb_port[port].enabled << 2
|
|
| hub.usb_port[port].connect_changed << 1
|
|
| hub.usb_port[port].status;
|
|
if (offset & 1) val >>= 8;
|
|
break;
|
|
} // else fall through to default
|
|
default:
|
|
val = 0xFF7F; // keep compiler happy
|
|
BX_ERROR(("unsupported io read from address=0x%04x!", (unsigned) address));
|
|
break;
|
|
}
|
|
|
|
// don't flood the log with reads from the Frame Register
|
|
if (offset != 0x06)
|
|
BX_DEBUG(("register read from address 0x%04X: 0x%08X (%2i bits)", (unsigned) address, (Bit32u) val, io_len * 8));
|
|
|
|
return(val);
|
|
}
|
|
|
|
// static IO port write callback handler
|
|
// redirects to non-static class handler to avoid virtual functions
|
|
|
|
void bx_uhci_core_c::write_handler(void *this_ptr, Bit32u address, Bit32u value, unsigned io_len)
|
|
{
|
|
bx_uhci_core_c *class_ptr = (bx_uhci_core_c *) this_ptr;
|
|
class_ptr->write(address, value, io_len);
|
|
}
|
|
|
|
void bx_uhci_core_c::write(Bit32u address, Bit32u value, unsigned io_len)
|
|
{
|
|
Bit8u offset,port;
|
|
|
|
BX_DEBUG(("register write to address 0x%04X: 0x%08X (%2i bits)", (unsigned) address, (unsigned) value, io_len * 8));
|
|
|
|
offset = address - pci_bar[4].addr;
|
|
|
|
switch (offset) {
|
|
case 0x00: // command register (16-bit) (R/W)
|
|
if (value & 0xFF00)
|
|
BX_DEBUG(("write to command register with bits 15:8 not zero: 0x%04x", value));
|
|
|
|
hub.usb_command.max_packet_size = (value & 0x80) ? 1: 0;
|
|
hub.usb_command.configured = (value & 0x40) ? 1: 0;
|
|
hub.usb_command.debug = (value & 0x20) ? 1: 0;
|
|
hub.usb_command.resume = (value & 0x10) ? 1: 0;
|
|
hub.usb_command.suspend = (value & 0x08) ? 1: 0;
|
|
hub.usb_command.reset = (value & 0x04) ? 1: 0;
|
|
hub.usb_command.host_reset = (value & 0x02) ? 1: 0;
|
|
hub.usb_command.schedule = (value & 0x01) ? 1: 0;
|
|
|
|
// HCRESET
|
|
if (hub.usb_command.host_reset) {
|
|
reset_uhci(0);
|
|
for (unsigned i=0; i<USB_UHCI_PORTS; i++) {
|
|
if (hub.usb_port[i].status) {
|
|
if (hub.usb_port[i].device != NULL) {
|
|
hub.usb_port[i].device->usb_send_msg(USB_MSG_RESET);
|
|
}
|
|
hub.usb_port[i].connect_changed = 1;
|
|
if (hub.usb_port[i].enabled) {
|
|
hub.usb_port[i].able_changed = 1;
|
|
hub.usb_port[i].enabled = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// If software set the GRESET bit, we need to send the reset to all USB.
|
|
// The software should guarentee that the reset is for at least 10ms.
|
|
// We hold the reset until software resets this bit
|
|
if (hub.usb_command.reset) {
|
|
global_reset = 1;
|
|
BX_DEBUG(("Global Reset"));
|
|
} else {
|
|
// if software cleared the reset, then we need to reset the usb registers.
|
|
if (global_reset) {
|
|
global_reset = 0;
|
|
unsigned int running = hub.usb_command.schedule;
|
|
reset_uhci(0);
|
|
hub.usb_status.host_halted = (running) ? 1 : 0;
|
|
}
|
|
}
|
|
|
|
// If Run/Stop, identify in log
|
|
if (hub.usb_command.schedule) {
|
|
hub.usb_status.host_halted = 0;
|
|
BX_DEBUG(("Schedule bit set in Command register"));
|
|
} else {
|
|
hub.usb_status.host_halted = 1;
|
|
BX_DEBUG(("Schedule bit clear in Command register"));
|
|
}
|
|
|
|
// If Debug mode set, panic. Not implemented
|
|
if (hub.usb_command.debug)
|
|
BX_PANIC(("Software set DEBUG bit in Command register. Not implemented"));
|
|
|
|
break;
|
|
|
|
case 0x02: // status register (16-bit) (R/WC)
|
|
if (value & 0xFFC0)
|
|
BX_DEBUG(("write to status register with bits 15:6 not zero: 0x%04x", value));
|
|
|
|
// host_halted, even though not specified in the specs, is read only
|
|
//hub.usb_status.host_halted = (value & 0x20) ? 0: hub.usb_status.host_halted;
|
|
hub.usb_status.host_error = (value & 0x10) ? 0: hub.usb_status.host_error;
|
|
hub.usb_status.pci_error = (value & 0x08) ? 0: hub.usb_status.pci_error;
|
|
hub.usb_status.resume = (value & 0x04) ? 0: hub.usb_status.resume;
|
|
hub.usb_status.error_interrupt = (value & 0x02) ? 0: hub.usb_status.error_interrupt;
|
|
hub.usb_status.interrupt = (value & 0x01) ? 0: hub.usb_status.interrupt;
|
|
if (value & 0x01) {
|
|
hub.usb_status.status2 = 0;
|
|
}
|
|
update_irq();
|
|
break;
|
|
|
|
case 0x04: // interrupt enable register (16-bit)
|
|
if (value & 0xFFF0)
|
|
BX_DEBUG(("write to interrupt enable register with bits 15:4 not zero: 0x%04x", value));
|
|
|
|
hub.usb_enable.short_packet = (value & 0x08) ? 1: 0;
|
|
hub.usb_enable.on_complete = (value & 0x04) ? 1: 0;
|
|
hub.usb_enable.resume = (value & 0x02) ? 1: 0;
|
|
hub.usb_enable.timeout_crc = (value & 0x01) ? 1: 0;
|
|
|
|
if (value & 0x08) {
|
|
BX_DEBUG(("Host set Enable Interrupt on Short Packet"));
|
|
}
|
|
if (value & 0x04) {
|
|
BX_DEBUG(("Host set Enable Interrupt on Complete"));
|
|
}
|
|
if (value & 0x02) {
|
|
BX_DEBUG(("Host set Enable Interrupt on Resume"));
|
|
}
|
|
update_irq();
|
|
break;
|
|
|
|
case 0x06: // frame number register (16-bit)
|
|
if (value & 0xF800)
|
|
BX_DEBUG(("write to frame number register with bits 15:11 not zero: 0x%04x", value));
|
|
|
|
if (hub.usb_status.host_halted)
|
|
hub.usb_frame_num.frame_num = (value & 0x07FF);
|
|
else
|
|
// ignored by the hardward, but lets report it anyway
|
|
BX_DEBUG(("write to frame number register with STATUS.HALTED == 0"));
|
|
break;
|
|
|
|
case 0x08: // frame base register (32-bit)
|
|
if (value & 0xFFF)
|
|
BX_DEBUG(("write to frame base register with bits 11:0 not zero: 0x%08x", value));
|
|
|
|
hub.usb_frame_base.frame_base = (value & ~0xfff);
|
|
break;
|
|
|
|
case 0x0C: // start of Frame Modify register (8-bit)
|
|
if (value & 0x80)
|
|
BX_DEBUG(("write to SOF Modify register with bit 7 not zero: 0x%04x", value));
|
|
|
|
hub.usb_sof.sof_timing = value;
|
|
break;
|
|
|
|
case 0x14: // port #3 non existant, but linux systems check it to see if there are more than 2
|
|
BX_ERROR(("write to non existant offset 0x14 (port #3)"));
|
|
break;
|
|
|
|
case 0x10: // port #1
|
|
case 0x12: // port #2
|
|
port = (offset & 0x0F) >> 1;
|
|
if ((port < USB_UHCI_PORTS) && (io_len == 2)) {
|
|
// If the ports reset bit is set, don't allow any writes unless the new write will clear the reset bit
|
|
if (hub.usb_port[port].reset & (value & (1<<9)))
|
|
break;
|
|
if (value & ((1<<5) | (1<<4) | (1<<0)))
|
|
BX_DEBUG(("write to one or more read-only bits in port #%d register: 0x%04x", port+1, value));
|
|
if (!(value & (1<<7)))
|
|
BX_DEBUG(("write to port #%d register bit 7 = 0", port+1));
|
|
if (value & (1<<8))
|
|
BX_DEBUG(("write to bit 8 in port #%d register ignored", port+1));
|
|
if ((value & (1<<12)) && hub.usb_command.suspend)
|
|
BX_DEBUG(("write to port #%d register bit 12 when in Global-Suspend", port+1));
|
|
|
|
hub.usb_port[port].suspend = (value & (1<<12)) ? 1 : 0;
|
|
hub.usb_port[port].reset = (value & (1<<9)) ? 1 : 0;
|
|
hub.usb_port[port].resume = (value & (1<<6)) ? 1 : 0;
|
|
if (!hub.usb_port[port].enabled && (value & (1<<2)))
|
|
hub.usb_port[port].able_changed = 0;
|
|
else
|
|
if ((value & (1<<3)) != 0) hub.usb_port[port].able_changed = 0;
|
|
hub.usb_port[port].enabled = (value & (1<<2)) ? 1 : 0;
|
|
if ((value & (1<<1)) != 0) hub.usb_port[port].connect_changed = 0;
|
|
|
|
// if port reset, reset function(s)
|
|
//TODO: only reset items on the downstream...
|
|
// for now, reset the one and only
|
|
// TODO: descriptors, etc....
|
|
if (hub.usb_port[port].reset) {
|
|
hub.usb_port[port].suspend = 0;
|
|
hub.usb_port[port].resume = 0;
|
|
hub.usb_port[port].enabled = 0;
|
|
// are we are currently connected/disconnected
|
|
if (hub.usb_port[port].status) {
|
|
if (hub.usb_port[port].device != NULL) {
|
|
hub.usb_port[port].low_speed =
|
|
(hub.usb_port[port].device->get_speed() == USB_SPEED_LOW);
|
|
set_connect_status(port, hub.usb_port[port].device->get_type(), 1);
|
|
hub.usb_port[port].device->usb_send_msg(USB_MSG_RESET);
|
|
}
|
|
}
|
|
BX_INFO(("Port%d: Reset", port+1));
|
|
}
|
|
break;
|
|
}
|
|
// else fall through to default
|
|
default:
|
|
BX_ERROR(("unsupported io write to address=0x%04x!", (unsigned) address));
|
|
break;
|
|
}
|
|
}
|
|
|
|
void bx_uhci_core_c::uhci_timer_handler(void *this_ptr)
|
|
{
|
|
bx_uhci_core_c *class_ptr = (bx_uhci_core_c *) this_ptr;
|
|
class_ptr->uhci_timer();
|
|
}
|
|
|
|
// Called once every 1ms
|
|
#define USB_STACK_SIZE 256
|
|
void bx_uhci_core_c::uhci_timer(void)
|
|
{
|
|
int i;
|
|
|
|
// If the "global reset" bit was set by software
|
|
if (global_reset) {
|
|
for (i=0; i<USB_UHCI_PORTS; i++) {
|
|
hub.usb_port[i].able_changed = 0;
|
|
hub.usb_port[i].connect_changed = 0;
|
|
hub.usb_port[i].enabled = 0;
|
|
hub.usb_port[i].line_dminus = 0;
|
|
hub.usb_port[i].line_dplus = 0;
|
|
hub.usb_port[i].low_speed = 0;
|
|
hub.usb_port[i].reset = 0;
|
|
hub.usb_port[i].resume = 0;
|
|
hub.usb_port[i].status = 0;
|
|
hub.usb_port[i].suspend = 0;
|
|
}
|
|
return;
|
|
}
|
|
|
|
// If command.schedule = 1, then run schedule
|
|
// *** This assumes that we can complete the frame within the 1ms time allowed ***
|
|
// Actually, not complete, but reach the end of the frame. This means that there may still
|
|
// be TDs and QHs that were BREADTH defined and will be executed on the next cycle/iteration.
|
|
|
|
if (busy) {
|
|
BX_PANIC(("Did not complete last frame before the 1ms was over. Starting next frame."));
|
|
busy = 0;
|
|
}
|
|
if (hub.usb_command.schedule) {
|
|
busy = 1;
|
|
bx_bool interrupt = 0, shortpacket = 0, stalled = 0, was_inactive = 0;
|
|
struct TD td;
|
|
struct HCSTACK stack[USB_STACK_SIZE+1]; // queue stack for this item only
|
|
Bit32s stk = 0;
|
|
Bit32u item, address, lastvertaddr = 0, queue_num = 0;
|
|
Bit32u frame, frm_addr = hub.usb_frame_base.frame_base +
|
|
(hub.usb_frame_num.frame_num << 2);
|
|
DEV_MEM_READ_PHYSICAL(frm_addr, 4, (Bit8u*) &frame);
|
|
if ((frame & 1) == 0) {
|
|
stack[stk].next = (frame & ~0xF);
|
|
stack[stk].d = 0;
|
|
stack[stk].q = (frame & 0x0002) ? 1 : 0;
|
|
stack[stk].t = 0;
|
|
while (stk > -1) {
|
|
|
|
// Linux seems to just loop a few queues together and wait for the 1ms to end.
|
|
// We will just count the stack and exit when we get to a good point to stop.
|
|
if (stk >= USB_STACK_SIZE) break;
|
|
|
|
// check to make sure we are not done before continue-ing on
|
|
if ((stack[stk].d == HC_VERT) && stack[stk].t) { stk--; continue; }
|
|
if ((stack[stk].d == HC_HORZ) && stack[stk].t) break;
|
|
if (stack[stk].q) { // is a queue
|
|
address = stack[stk].next;
|
|
lastvertaddr = address + 4;
|
|
// get HORZ slot
|
|
stk++;
|
|
DEV_MEM_READ_PHYSICAL(address, 4, (Bit8u*) &item);
|
|
stack[stk].next = item & ~0xF;
|
|
stack[stk].d = HC_HORZ;
|
|
stack[stk].q = (item & 0x0002) ? 1 : 0;
|
|
stack[stk].t = (item & 0x0001) ? 1 : 0;
|
|
// get VERT slot
|
|
stk++;
|
|
DEV_MEM_READ_PHYSICAL(lastvertaddr, 4, (Bit8u*) &item);
|
|
stack[stk].next = item & ~0xF;
|
|
stack[stk].d = HC_VERT;
|
|
stack[stk].q = (item & 0x0002) ? 1 : 0;
|
|
stack[stk].t = (item & 0x0001) ? 1 : 0;
|
|
#if UHCI_FULL_DEBUG
|
|
BX_DEBUG(("Queue %3i: 0x%08X %i %i 0x%08X %i %i", queue_num,
|
|
stack[stk-1].next, stack[stk-1].q, stack[stk-1].t,
|
|
stack[stk].next, stack[stk].q, stack[stk].t));
|
|
#endif
|
|
queue_num++;
|
|
} else { // else is a TD
|
|
address = stack[stk].next;
|
|
DEV_MEM_READ_PHYSICAL(address, 4, (Bit8u*) &td.dword0);
|
|
DEV_MEM_READ_PHYSICAL(address+4, 4, (Bit8u*) &td.dword1);
|
|
DEV_MEM_READ_PHYSICAL(address+8, 4, (Bit8u*) &td.dword2);
|
|
DEV_MEM_READ_PHYSICAL(address+12, 4, (Bit8u*) &td.dword3);
|
|
bx_bool spd = (td.dword1 & (1<<29)) ? 1 : 0;
|
|
stack[stk].next = td.dword0 & ~0xF;
|
|
bx_bool depthbreadth = (td.dword0 & 0x0004) ? 1 : 0; // 1 = depth first, 0 = breadth first
|
|
stack[stk].q = (td.dword0 & 0x0002) ? 1 : 0;
|
|
stack[stk].t = (td.dword0 & 0x0001) ? 1 : 0;
|
|
if (td.dword1 & (1<<23)) { // is it an active TD
|
|
BX_DEBUG(("Frame: %04i (0x%04X)", hub.usb_frame_num.frame_num, hub.usb_frame_num.frame_num));
|
|
if (DoTransfer(address, queue_num, &td)) {
|
|
if (td.dword1 & (1<<24)) interrupt = 1;
|
|
// issue short packet?
|
|
Bit16u r_actlen = (((td.dword1 & 0x7FF)+1) & 0x7FF);
|
|
Bit16u r_maxlen = (((td.dword2>>21)+1) & 0x7FF);
|
|
BX_DEBUG((" r_actlen = 0x%04X r_maxlen = 0x%04X", r_actlen, r_maxlen));
|
|
if (((td.dword2 & 0xFF) == USB_TOKEN_IN) && spd && stk && (r_actlen < r_maxlen) && ((td.dword1 & 0x00FF0000) == 0)) {
|
|
BX_DEBUG(("Short Packet Detected"));
|
|
shortpacket = 1;
|
|
td.dword1 |= (1<<29);
|
|
}
|
|
if (td.dword1 & (1<<22)) stalled = 1;
|
|
|
|
DEV_MEM_WRITE_PHYSICAL(address+4, 4, (Bit8u*) &td.dword1); // write back the status
|
|
if (shortpacket) {
|
|
td.dword0 |= 1;
|
|
stack[stk].t = 1;
|
|
}
|
|
// copy pointer for next queue item, in to vert queue head
|
|
if ((stk > 0) && (stack[stk].d == HC_VERT) && !shortpacket)
|
|
DEV_MEM_WRITE_PHYSICAL(lastvertaddr, 4, (Bit8u*) &td.dword0);
|
|
}
|
|
was_inactive = 0;
|
|
} else
|
|
was_inactive = 1;
|
|
|
|
if (stk > 0) {
|
|
// if last TD in HORZ queue pointer, then we are done.
|
|
if (stack[stk].t && (stack[stk].d == HC_HORZ)) break;
|
|
// if Breadth first or last item in queue, move to next queue.
|
|
if (was_inactive || !depthbreadth || stack[stk].t) {
|
|
if (stack[stk].d == HC_HORZ) queue_num--; // <-- really, this should never happen until we
|
|
stk--; // support bandwidth reclamation...
|
|
}
|
|
if (stk < 1) break;
|
|
} else {
|
|
if (stack[stk].t) break;
|
|
}
|
|
}
|
|
}
|
|
|
|
// set the status register bit:0 to 1 if SPD is enabled
|
|
// and if interrupts not masked via interrupt register, raise irq interrupt.
|
|
if (shortpacket) hub.usb_status.status2 |= 2;
|
|
if (shortpacket && hub.usb_enable.short_packet) {
|
|
BX_DEBUG((" [SPD] We want it to fire here (Frame: %04i)", hub.usb_frame_num.frame_num));
|
|
}
|
|
|
|
// if one of the TD's in this frame had the ioc bit set, we need to
|
|
// raise an interrupt, if interrupts are not masked via interrupt register.
|
|
// always set the status register if IOC.
|
|
hub.usb_status.status2 |= interrupt;
|
|
if (interrupt && hub.usb_enable.on_complete) {
|
|
BX_DEBUG((" [IOC] We want it to fire here (Frame: %04i)", hub.usb_frame_num.frame_num));
|
|
}
|
|
|
|
hub.usb_status.error_interrupt |= stalled;
|
|
if (stalled && hub.usb_enable.timeout_crc) {
|
|
BX_DEBUG((" [stalled] We want it to fire here (Frame: %04i)", hub.usb_frame_num.frame_num));
|
|
}
|
|
}
|
|
|
|
// The Frame Number Register is incremented every 1ms
|
|
hub.usb_frame_num.frame_num++;
|
|
hub.usb_frame_num.frame_num &= (1024-1);
|
|
|
|
// The status.interrupt bit should be set regardless of the enable bits if a IOC or SPD is found
|
|
if (interrupt || shortpacket) {
|
|
hub.usb_status.interrupt = 1;
|
|
}
|
|
// if we needed to fire an interrupt now, lets do it *after* we increment the frame_num register
|
|
update_irq();
|
|
|
|
busy = 0; // ready to do next frame item
|
|
} // end run schedule
|
|
|
|
// if host turned off the schedule, set the halted bit in the status register
|
|
// Note: Can not use an else from the if() above since the host can changed this bit
|
|
// while we are processing a frame.
|
|
if (hub.usb_command.schedule == 0)
|
|
hub.usb_status.host_halted = 1;
|
|
|
|
// TODO:
|
|
// If in Global_Suspend mode and any of usb_port[i] bits 6,3, or 1 are set,
|
|
// we need to issue a Global_Resume (set the global resume bit).
|
|
// However, since we don't do anything, let's not.
|
|
}
|
|
|
|
void uhci_event_handler(int event, USBPacket *packet, void *dev, int port)
|
|
{
|
|
((bx_uhci_core_c*)dev)->event_handler(event, packet, port);
|
|
}
|
|
|
|
void bx_uhci_core_c::event_handler(int event, USBPacket *packet, int port)
|
|
{
|
|
if (event == USB_EVENT_ASYNC) {
|
|
BX_DEBUG(("Async packet completion"));
|
|
USBAsync *p = container_of_usb_packet(packet);
|
|
p->done = 1;
|
|
} else if (event == USB_EVENT_WAKEUP) {
|
|
if (hub.usb_port[port].suspend && !hub.usb_port[port].resume) {
|
|
hub.usb_port[port].resume = 1;
|
|
}
|
|
// if in suspend state, signal resume
|
|
if (hub.usb_command.suspend) {
|
|
hub.usb_command.resume = 1;
|
|
hub.usb_status.resume = 1;
|
|
if (hub.usb_enable.resume) {
|
|
hub.usb_status.interrupt = 1;
|
|
}
|
|
update_irq();
|
|
}
|
|
} else {
|
|
BX_ERROR(("unknown/unsupported event (id=%d) on port #%d", event, port+1));
|
|
}
|
|
}
|
|
|
|
bx_bool bx_uhci_core_c::DoTransfer(Bit32u address, Bit32u queue_num, struct TD *td) {
|
|
|
|
int len = 0, ret = 0;
|
|
USBAsync *p;
|
|
bx_bool completion;
|
|
|
|
Bit16u maxlen = (td->dword2 >> 21);
|
|
Bit8u addr = (td->dword2 >> 8) & 0x7F;
|
|
Bit8u endpt = (td->dword2 >> 15) & 0x0F;
|
|
Bit8u pid = td->dword2 & 0xFF;
|
|
|
|
p = find_async_packet(&packets, address);
|
|
completion = (p != NULL);
|
|
if (completion && !p->done) {
|
|
return 0;
|
|
}
|
|
|
|
BX_DEBUG(("QH%03i:TD found at address: 0x%08X", queue_num, address));
|
|
BX_DEBUG((" %08X %08X %08X %08X", td->dword0, td->dword1, td->dword2, td->dword3));
|
|
|
|
// check TD to make sure it is valid
|
|
// A max length 0x500 to 0x77E is illegal
|
|
if ((maxlen >= 0x500) && (maxlen != 0x7FF)) {
|
|
BX_ERROR(("invalid max. length value 0x%04x", maxlen ));
|
|
return 0; // error = consistency check failure
|
|
}
|
|
|
|
// if (td->dword0 & 0x8) return 1; // error = reserved bit in dword0 set
|
|
// other error checks here
|
|
|
|
// the device should remain in a stall state until the next setup packet is recieved
|
|
// For some reason, this doesn't work yet.
|
|
//if (dev && dev->in_stall && (pid != USB_TOKEN_SETUP))
|
|
// return FALSE;
|
|
|
|
maxlen++;
|
|
maxlen &= 0x7FF;
|
|
|
|
if (completion) {
|
|
ret = p->packet.len;
|
|
} else {
|
|
p = create_async_packet(&packets, address, maxlen);
|
|
p->packet.pid = pid;
|
|
p->packet.devaddr = addr;
|
|
p->packet.devep = endpt;
|
|
p->packet.complete_cb = uhci_event_handler;
|
|
p->packet.complete_dev = this;
|
|
switch (pid) {
|
|
case USB_TOKEN_OUT:
|
|
case USB_TOKEN_SETUP:
|
|
if (maxlen > 0) {
|
|
DEV_MEM_READ_PHYSICAL_DMA(td->dword3, maxlen, p->packet.data);
|
|
}
|
|
ret = broadcast_packet(&p->packet);
|
|
len = maxlen;
|
|
break;
|
|
case USB_TOKEN_IN:
|
|
ret = broadcast_packet(&p->packet);
|
|
break;
|
|
default:
|
|
hub.usb_status.host_error = 1;
|
|
update_irq();
|
|
return 0;
|
|
}
|
|
if (ret == USB_RET_ASYNC) {
|
|
BX_DEBUG(("Async packet deferred"));
|
|
return 0;
|
|
}
|
|
}
|
|
if (pid == USB_TOKEN_IN) {
|
|
if (ret >= 0) {
|
|
len = ret;
|
|
if (len > maxlen) {
|
|
len = maxlen;
|
|
ret = USB_RET_BABBLE;
|
|
}
|
|
if (len > 0) {
|
|
DEV_MEM_WRITE_PHYSICAL_DMA(td->dword3, len, p->packet.data);
|
|
}
|
|
} else {
|
|
len = 0;
|
|
}
|
|
}
|
|
if (ret >= 0) {
|
|
set_status(td, 0, 0, 0, 0, 0, 0, len-1);
|
|
} else if (ret == USB_RET_NAK) {
|
|
set_status(td, 0, 0, 0, 1, 0, 0, len-1); // NAK
|
|
} else {
|
|
set_status(td, 1, 0, 0, 0, 0, 0, 0x007); // stalled
|
|
}
|
|
remove_async_packet(&packets, p);
|
|
return 1;
|
|
}
|
|
|
|
int bx_uhci_core_c::broadcast_packet(USBPacket *p)
|
|
{
|
|
int i, ret;
|
|
|
|
ret = USB_RET_NODEV;
|
|
for (i = 0; i < USB_UHCI_PORTS && ret == USB_RET_NODEV; i++) {
|
|
if ((hub.usb_port[i].device != NULL) &&
|
|
(hub.usb_port[i].enabled)) {
|
|
ret = hub.usb_port[i].device->handle_packet(p);
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
// If the request fails, set the stall bit ????
|
|
void bx_uhci_core_c::set_status(struct TD *td, bx_bool stalled, bx_bool data_buffer_error, bx_bool babble,
|
|
bx_bool nak, bx_bool crc_time_out, bx_bool bitstuff_error, Bit16u act_len)
|
|
{
|
|
// clear out the bits we can modify and/or want zero
|
|
td->dword1 &= 0xDF00F800;
|
|
|
|
// now set the bits according to the passed param's
|
|
td->dword1 |= stalled ? (1<<22) : 0; // stalled
|
|
td->dword1 |= data_buffer_error ? (1<<21) : 0; // data buffer error
|
|
td->dword1 |= babble ? (1<<20) : 0; // babble
|
|
td->dword1 |= nak ? (1<<19) : 0; // nak
|
|
td->dword1 |= crc_time_out ? (1<<18) : 0; // crc/timeout
|
|
td->dword1 |= bitstuff_error ? (1<<17) : 0; // bitstuff error
|
|
td->dword1 |= (act_len & 0x7FF); // actual length
|
|
if (stalled || data_buffer_error || babble || crc_time_out || bitstuff_error)
|
|
td->dword1 &= ~((1<<28) | (1<<27)); // clear the c_err field in there was an error
|
|
}
|
|
|
|
|
|
// pci configuration space write callback handler
|
|
void bx_uhci_core_c::pci_write_handler(Bit8u address, Bit32u value, unsigned io_len)
|
|
{
|
|
if (((address >= 0x10) && (address < 0x20)) ||
|
|
((address > 0x23) && (address < 0x34)))
|
|
return;
|
|
|
|
for (unsigned i=0; i<io_len; i++) {
|
|
Bit8u value8 = (value >> (i*8)) & 0xFF;
|
|
// Bit8u oldval = pci_conf[address+i];
|
|
switch (address+i) {
|
|
case 0x04:
|
|
value8 &= 0x05;
|
|
pci_conf[address+i] = value8;
|
|
break;
|
|
case 0x3d: //
|
|
case 0x3e: //
|
|
case 0x3f: //
|
|
case 0x05: // disallowing write to command hi-byte
|
|
case 0x06: // disallowing write to status lo-byte (is that expected?)
|
|
break;
|
|
default:
|
|
pci_conf[address+i] = value8;
|
|
}
|
|
}
|
|
|
|
if (io_len == 1)
|
|
BX_DEBUG(("write PCI register 0x%02x value 0x%02x", address, value));
|
|
else if (io_len == 2)
|
|
BX_DEBUG(("write PCI register 0x%02x value 0x%04x", address, value));
|
|
else if (io_len == 4)
|
|
BX_DEBUG(("write PCI register 0x%02x value 0x%08x", address, value));
|
|
}
|
|
|
|
const char *usb_speed[4] = {
|
|
"low",
|
|
"full",
|
|
"high",
|
|
"super"
|
|
};
|
|
|
|
void bx_uhci_core_c::set_connect_status(Bit8u port, int type, bx_bool connected)
|
|
{
|
|
usb_device_c *device = hub.usb_port[port].device;
|
|
if (device != NULL) {
|
|
if (device->get_type() == type) {
|
|
if (connected) {
|
|
BX_DEBUG(("port #%d: speed = %s", port+1, usb_speed[device->get_speed()]));
|
|
switch (device->get_speed()) {
|
|
case USB_SPEED_LOW:
|
|
hub.usb_port[port].low_speed = 1;
|
|
break;
|
|
case USB_SPEED_FULL:
|
|
hub.usb_port[port].low_speed = 0;
|
|
break;
|
|
case USB_SPEED_HIGH:
|
|
case USB_SPEED_SUPER:
|
|
BX_ERROR(("HC ignores device with unsupported speed"));
|
|
return;
|
|
default:
|
|
BX_PANIC(("USB device returned invalid speed value"));
|
|
set_connect_status(port, type, 0);
|
|
return;
|
|
}
|
|
if (hub.usb_port[port].low_speed) {
|
|
hub.usb_port[port].line_dminus = 1; // dminus=1 & dplus=0 = low speed (at idle time)
|
|
hub.usb_port[port].line_dplus = 0; // dminus=0 & dplus=1 = high speed (at idle time)
|
|
} else {
|
|
hub.usb_port[port].line_dminus = 0;
|
|
hub.usb_port[port].line_dplus = 1;
|
|
}
|
|
hub.usb_port[port].status = 1;
|
|
hub.usb_port[port].connect_changed = 1;
|
|
|
|
// if in suspend state, signal resume
|
|
if (hub.usb_command.suspend) {
|
|
hub.usb_port[port].resume = 1;
|
|
hub.usb_status.resume = 1;
|
|
if (hub.usb_enable.resume) {
|
|
hub.usb_status.interrupt = 1;
|
|
}
|
|
update_irq();
|
|
}
|
|
|
|
if (!device->get_connected()) {
|
|
if (!device->init()) {
|
|
set_connect_status(port, type, 0);
|
|
BX_ERROR(("port #%d: connect failed", port+1));
|
|
return;
|
|
} else {
|
|
BX_INFO(("port #%d: connect: %s", port+1, device->get_info()));
|
|
}
|
|
}
|
|
device->set_event_handler(this, uhci_event_handler, port);
|
|
} else {
|
|
hub.usb_port[port].status = 0;
|
|
hub.usb_port[port].connect_changed = 1;
|
|
if (hub.usb_port[port].enabled) {
|
|
hub.usb_port[port].able_changed = 1;
|
|
hub.usb_port[port].enabled = 0;
|
|
}
|
|
hub.usb_port[port].low_speed = 0;
|
|
hub.usb_port[port].line_dminus = 0;
|
|
hub.usb_port[port].line_dplus = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void bx_uhci_core_c::set_port_device(int port, usb_device_c *dev)
|
|
{
|
|
usb_device_c *olddev = hub.usb_port[port].device;
|
|
if ((dev != NULL) && (olddev == NULL)) {
|
|
hub.usb_port[port].device = dev;
|
|
set_connect_status(port, dev->get_type(), 1);
|
|
} else if ((dev == NULL) && (olddev != NULL)) {
|
|
set_connect_status(port, olddev->get_type(), 0);
|
|
hub.usb_port[port].device = dev;
|
|
}
|
|
}
|
|
|
|
#endif // BX_SUPPORT_PCI && BX_SUPPORT_USB_UHCI
|