mirrors/Bochs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d26660dac1
Bochs/bochs/cpu/proc_ctrl.cc
Stanislav Shwartsman d26660dac1 small fixes
2009-08-19 09:59:30 +00:00

2372 lines
77 KiB
C++
Raw Blame History

/////////////////////////////////////////////////////////////////////////
// $Id: proc_ctrl.cc,v 1.303 2009-08-19 09:59:30 sshwarts Exp $
/////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2001 MandrakeSoft S.A.
//
// MandrakeSoft S.A.
// 43, rue d'Aboukir
// 75002 Paris - France
// http://www.linux-mandrake.com/
// http://www.mandrakesoft.com/
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA B 02110-1301 USA
//
/////////////////////////////////////////////////////////////////////////
#define NEED_CPU_REG_SHORTCUTS 1
#include "bochs.h"
#include "cpu.h"
#define LOG_THIS BX_CPU_THIS_PTR
#if BX_SUPPORT_X86_64==0
// Make life easier for merging code.
#define RAX EAX
#define RCX ECX
#define RDX EDX
#define RIP EIP
#endif
void BX_CPP_AttrRegparmN(1) BX_CPU_C::UndefinedOpcode(bxInstruction_c *i)
{
BX_DEBUG(("UndefinedOpcode: b1 = 0x%02x causes #UD exception", i->b1()));
exception(BX_UD_EXCEPTION, 0, 0);
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::NOP(bxInstruction_c *i)
{
// No operation.
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::PAUSE(bxInstruction_c *i)
{
#if BX_SUPPORT_VMX
VMexit_PAUSE(i);
#endif
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::PREFETCH(bxInstruction_c *i)
{
#if BX_INSTRUMENTATION
bx_address eaddr = BX_CPU_CALL_METHODR(i->ResolveModrm, (i));
BX_INSTR_PREFETCH_HINT(BX_CPU_ID, i->nnn(), i->seg(), eaddr);
#endif
}
//
// The shutdown state is very similar to the state following the exection
// if HLT instruction. In this mode the processor stops executing
// instructions until #NMI, #SMI, #RESET or #INIT is received. If
// shutdown occurs why in NMI interrupt handler or in SMM, a hardware
// reset must be used to restart the processor execution.
//
void BX_CPU_C::shutdown(void)
{
BX_PANIC(("Entering to shutdown state still not implemented"));
BX_CPU_THIS_PTR clear_IF();
// artificial trap bit, why use another variable.
BX_CPU_THIS_PTR activity_state = BX_ACTIVITY_STATE_HLT;
BX_CPU_THIS_PTR async_event = 1; // so processor knows to check
// Execution of this instruction completes. The processor
// will remain in a halt state until one of the above conditions
// is met.
BX_INSTR_HLT(BX_CPU_ID);
#if BX_DEBUGGER
bx_dbg_halt(BX_CPU_ID);
#endif
#if BX_USE_IDLE_HACK
bx_gui->sim_is_idle();
#endif
longjmp(BX_CPU_THIS_PTR jmp_buf_env, 1); // go back to main decode loop
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::HLT(bxInstruction_c *i)
{
if (!real_mode() && CPL!=0) {
BX_DEBUG(("HLT: %s priveledge check failed, CPL=%d, generate #GP(0)",
cpu_mode_string(BX_CPU_THIS_PTR cpu_mode), CPL));
exception(BX_GP_EXCEPTION, 0, 0);
}
if (! BX_CPU_THIS_PTR get_IF()) {
BX_INFO(("WARNING: HLT instruction with IF=0!"));
}
#if BX_SUPPORT_VMX
VMexit_HLT(i);
#endif
// stops instruction execution and places the processor in a
// HALT state. An enabled interrupt, NMI, or reset will resume
// execution. If interrupt (including NMI) is used to resume
// execution after HLT, the saved CS:eIP points to instruction
// following HLT.
// artificial trap bit, why use another variable.
BX_CPU_THIS_PTR activity_state = BX_ACTIVITY_STATE_HLT;
BX_CPU_THIS_PTR async_event = 1; // so processor knows to check
// Execution of this instruction completes. The processor
// will remain in a halt state until one of the above conditions
// is met.
BX_INSTR_HLT(BX_CPU_ID);
#if BX_DEBUGGER
bx_dbg_halt(BX_CPU_ID);
#endif
#if BX_USE_IDLE_HACK
bx_gui->sim_is_idle();
#endif
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::CLTS(bxInstruction_c *i)
{
if (!real_mode() && CPL!=0) {
BX_ERROR(("CLTS: priveledge check failed, generate #GP(0)"));
exception(BX_GP_EXCEPTION, 0, 0);
}
#if BX_SUPPORT_VMX
if(VMexit_CLTS(i)) return;
#endif
BX_CPU_THIS_PTR cr0.set_TS(0);
}
/* 0F 08 */
void BX_CPP_AttrRegparmN(1) BX_CPU_C::INVD(bxInstruction_c *i)
{
#if BX_CPU_LEVEL >= 4
if (!real_mode() && CPL!=0) {
BX_ERROR(("INVD: priveledge check failed, generate #GP(0)"));
exception(BX_GP_EXCEPTION, 0, 0);
}
#if BX_SUPPORT_VMX
if (BX_CPU_THIS_PTR in_vmx_guest) {
BX_ERROR(("VMEXIT: INVD in VMX non-root operation"));
VMexit(i, VMX_VMEXIT_INVD, 0);
}
#endif
invalidate_prefetch_q();
BX_DEBUG(("INVD: Flush internal caches !"));
BX_INSTR_CACHE_CNTRL(BX_CPU_ID, BX_INSTR_INVD);
flushICaches();
#else
BX_INFO(("INVD: required 486 support, use --enable-cpu-level=4 option"));
exception(BX_UD_EXCEPTION, 0, 0);
#endif
}
/* 0F 09 */
void BX_CPP_AttrRegparmN(1) BX_CPU_C::WBINVD(bxInstruction_c *i)
{
#if BX_CPU_LEVEL >= 4
if (!real_mode() && CPL!=0) {
BX_ERROR(("INVD/WBINVD: priveledge check failed, generate #GP(0)"));
exception(BX_GP_EXCEPTION, 0, 0);
}
invalidate_prefetch_q();
BX_DEBUG(("WBINVD: Flush internal caches !"));
BX_INSTR_CACHE_CNTRL(BX_CPU_ID, BX_INSTR_WBINVD);
flushICaches();
#else
BX_INFO(("WBINVD: required 486 support, use --enable-cpu-level=4 option"));
exception(BX_UD_EXCEPTION, 0, 0);
#endif
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::CLFLUSH(bxInstruction_c *i)
{
#if BX_SUPPORT_CLFLUSH
bx_segment_reg_t *seg = &BX_CPU_THIS_PTR sregs[i->seg()];
bx_address eaddr = BX_CPU_CALL_METHODR(i->ResolveModrm, (i));
bx_address laddr = BX_CPU_THIS_PTR get_laddr(i->seg(), eaddr);
#if BX_SUPPORT_X86_64
if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64) {
if (! IsCanonical(laddr)) {
BX_ERROR(("CLFLUSH: non-canonical access !"));
exception(int_number(i->seg()), 0, 0);
}
}
else
#endif
{
// check if we could access the memory segment
if (!(seg->cache.valid & SegAccessROK)) {
if (! execute_virtual_checks(seg, (Bit32u) eaddr, 1))
exception(int_number(i->seg()), 0, 0);
}
else {
if (eaddr > seg->cache.u.segment.limit_scaled) {
BX_ERROR(("CLFLUSH: segment limit violation"));
exception(int_number(i->seg()), 0, 0);
}
}
}
bx_phy_address paddr;
if (BX_CPU_THIS_PTR cr0.get_PG()) {
paddr = dtranslate_linear(laddr, CPL, BX_READ);
paddr = A20ADDR(paddr);
}
else
{
paddr = A20ADDR(laddr);
}
BX_INSTR_CLFLUSH(BX_CPU_ID, laddr, paddr);
#if BX_X86_DEBUGGER
hwbreakpoint_match(laddr, 1, BX_READ);
#endif
#else
BX_INFO(("CLFLUSH: not supported, enable with SSE2"));
exception(BX_UD_EXCEPTION, 0, 0);
#endif
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_DdRd(bxInstruction_c *i)
{
#if BX_SUPPORT_VMX
VMexit_DR_Access(i, 0 /* write */);
#endif
#if BX_CPU_LEVEL >= 4
if (BX_CPU_THIS_PTR cr4.get_DE()) {
if ((i->nnn() & 0xE) == 4) {
BX_ERROR(("MOV_DdRd: access to DR4/DR5 causes #UD"));
exception(BX_UD_EXCEPTION, 0, 0);
}
}
#endif
// Note: processor clears GD upon entering debug exception
// handler, to allow access to the debug registers
if (BX_CPU_THIS_PTR dr7 & 0x2000) { // GD bit set
BX_ERROR(("MOV_DdRd: DR7 GD bit is set"));
BX_CPU_THIS_PTR debug_trap |= BX_DEBUG_DR_ACCESS_BIT;
exception(BX_DB_EXCEPTION, 0, 0);
}
if (!real_mode() && CPL!=0) {
BX_ERROR(("MOV_DdRd: CPL!=0 not in real mode"));
exception(BX_GP_EXCEPTION, 0, 0);
}
/* NOTES:
* 32bit operands always used
* r/m field specifies general register
* reg field specifies which special register
*/
invalidate_prefetch_q();
/* This instruction is always treated as a register-to-register,
* regardless of the encoding of the MOD field in the MODRM byte.
*/
if (!i->modC0())
BX_PANIC(("MOV_DdRd(): rm field not a register!"));
Bit32u val_32 = BX_READ_32BIT_REG(i->rm());
switch (i->nnn()) {
case 0: // DR0
case 1: // DR1
case 2: // DR2
case 3: // DR3
TLB_invlpg(val_32);
BX_CPU_THIS_PTR dr[i->nnn()] = val_32;
break;
case 4: // DR4
// DR4 aliased to DR6 by default. With Debug Extensions on,
// access to DR4 causes #UD
case 6: // DR6
#if BX_CPU_LEVEL <= 4
// On 386/486 bit12 is settable
BX_CPU_THIS_PTR dr6 = (BX_CPU_THIS_PTR dr6 & 0xffff0ff0) |
(val_32 & 0x0000f00f);
#else
// On Pentium+, bit12 is always zero
BX_CPU_THIS_PTR dr6 = (BX_CPU_THIS_PTR dr6 & 0xffff0ff0) |
(val_32 & 0x0000e00f);
#endif
break;
case 5: // DR5
// DR5 aliased to DR7 by default. With Debug Extensions on,
// access to DR5 causes #UD
case 7: // DR7
// Note: 486+ ignore GE and LE flags. On the 386, exact
// data breakpoint matching does not occur unless it is enabled
// by setting the LE and/or GE flags.
// Some sanity checks...
if (((((val_32>>16) & 3)==0) && (((val_32>>18) & 3)!=0)) ||
((((val_32>>20) & 3)==0) && (((val_32>>22) & 3)!=0)) ||
((((val_32>>24) & 3)==0) && (((val_32>>26) & 3)!=0)) ||
((((val_32>>28) & 3)==0) && (((val_32>>30) & 3)!=0)))
{
// Instruction breakpoint with LENx not 00b (1-byte length)
BX_ERROR(("MOV_DdRd: write of %08x, R/W=00b LEN!=00b", val_32));
}
#if BX_CPU_LEVEL <= 4
// 386/486: you can play with all the bits except b10 is always 1
BX_CPU_THIS_PTR dr7 = val_32 | 0x00000400;
#else
// Pentium+: bits15,14,12 are hardwired to 0, rest are settable.
// Even bits 11,10 are changeable though reserved.
BX_CPU_THIS_PTR dr7 = (val_32 & 0xffff2fff) | 0x00000400;
#endif
#if BX_X86_DEBUGGER
// if we have code breakpoints enabled then we must check
// breakpoints condition in cpu loop
if (BX_CPU_THIS_PTR dr7 & 0xff) {
if (((BX_CPU_THIS_PTR dr7 >> 16) & 3) == 0 ||
((BX_CPU_THIS_PTR dr7 >> 20) & 3) == 0 ||
((BX_CPU_THIS_PTR dr7 >> 24) & 3) == 0 ||
((BX_CPU_THIS_PTR dr7 >> 28) & 3) == 0)
{
BX_INFO(("MOV_DdRd(): code breakpoint is set"));
BX_CPU_THIS_PTR async_event = 1;
}
}
#endif
break;
default:
BX_ERROR(("MOV_DdRd: #UD - register index out of range"));
exception(BX_UD_EXCEPTION, 0, 0);
}
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_RdDd(bxInstruction_c *i)
{
Bit32u val_32;
#if BX_SUPPORT_VMX
VMexit_DR_Access(i, 1 /* read */);
#endif
#if BX_CPU_LEVEL >= 4
if (BX_CPU_THIS_PTR cr4.get_DE()) {
if ((i->nnn() & 0xE) == 4) {
BX_ERROR(("MOV_RdDd: access to DR4/DR5 causes #UD"));
exception(BX_UD_EXCEPTION, 0, 0);
}
}
#endif
// Note: processor clears GD upon entering debug exception
// handler, to allow access to the debug registers
if (BX_CPU_THIS_PTR dr7 & 0x2000) { // GD bit set
BX_ERROR(("MOV_RdDd: DR7 GD bit is set"));
BX_CPU_THIS_PTR debug_trap |= BX_DEBUG_DR_ACCESS_BIT;
exception(BX_DB_EXCEPTION, 0, 0);
}
if (!real_mode() && CPL!=0) {
BX_ERROR(("MOV_RdDd: CPL!=0 not in real mode"));
exception(BX_GP_EXCEPTION, 0, 0);
}
/* This instruction is always treated as a register-to-register,
* regardless of the encoding of the MOD field in the MODRM byte.
*/
if (!i->modC0())
BX_PANIC(("MOV_RdDd(): rm field not a register!"));
switch (i->nnn()) {
case 0: // DR0
case 1: // DR1
case 2: // DR2
case 3: // DR3
val_32 = (Bit32u) BX_CPU_THIS_PTR dr[i->nnn()];
break;
case 4: // DR4
// DR4 aliased to DR6 by default. With Debug Extensions ON,
// access to DR4 causes #UD
case 6: // DR6
val_32 = BX_CPU_THIS_PTR dr6;
break;
case 5: // DR5
// DR5 aliased to DR7 by default. With Debug Extensions ON,
// access to DR5 causes #UD
case 7: // DR7
val_32 = BX_CPU_THIS_PTR dr7;
break;
default:
BX_ERROR(("MOV_RdDd: #UD - register index out of range"));
exception(BX_UD_EXCEPTION, 0, 0);
}
BX_WRITE_32BIT_REGZ(i->rm(), val_32);
}
#if BX_SUPPORT_X86_64
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_DqRq(bxInstruction_c *i)
{
#if BX_SUPPORT_VMX
VMexit_DR_Access(i, 0 /* write */);
#endif
/* NOTES:
* 64bit operands always used
* r/m field specifies general register
* reg field specifies which special register
*/
if (BX_CPU_THIS_PTR cr4.get_DE()) {
if ((i->nnn() & 0xE) == 4) {
BX_ERROR(("MOV_DqRq: access to DR4/DR5 causes #UD"));
exception(BX_UD_EXCEPTION, 0, 0);
}
}
// Note: processor clears GD upon entering debug exception
// handler, to allow access to the debug registers
if (BX_CPU_THIS_PTR dr7 & 0x2000) { // GD bit set
BX_ERROR(("MOV_DqRq: DR7 GD bit is set"));
BX_CPU_THIS_PTR debug_trap |= BX_DEBUG_DR_ACCESS_BIT;
exception(BX_DB_EXCEPTION, 0, 0);
}
/* #GP(0) if CPL is not 0 */
if (CPL != 0) {
BX_ERROR(("MOV_DqRq: #GP(0) if CPL is not 0"));
exception(BX_GP_EXCEPTION, 0, 0);
}
invalidate_prefetch_q();
/* This instruction is always treated as a register-to-register,
* regardless of the encoding of the MOD field in the MODRM byte.
*/
if (!i->modC0())
BX_PANIC(("MOV_DqRq(): rm field not a register!"));
Bit64u val_64 = BX_READ_64BIT_REG(i->rm());
switch (i->nnn()) {
case 0: // DR0
case 1: // DR1
case 2: // DR2
case 3: // DR3
TLB_invlpg(val_64);
BX_CPU_THIS_PTR dr[i->nnn()] = val_64;
break;
case 4: // DR4
// DR4 aliased to DR6 by default. With Debug Extensions ON,
// access to DR4 causes #UD
case 6: // DR6
if (GET32H(val_64)) {
BX_ERROR(("MOV_DqRq: attempt to set upper part of DR6"));
exception(BX_GP_EXCEPTION, 0, 0);
}
// On Pentium+, bit12 is always zero
BX_CPU_THIS_PTR dr6 = (BX_CPU_THIS_PTR dr6 & 0xffff0ff0) |
(val_64 & 0x0000e00f);
break;
case 5: // DR5
// DR5 aliased to DR7 by default. With Debug Extensions ON,
// access to DR5 causes #UD
case 7: // DR7
// Note: 486+ ignore GE and LE flags. On the 386, exact
// data breakpoint matching does not occur unless it is enabled
// by setting the LE and/or GE flags.
if (GET32H(val_64)) {
BX_ERROR(("MOV_DqRq: attempt to set upper part of DR7"));
exception(BX_GP_EXCEPTION, 0, 0);
}
// Some sanity checks...
if (((((val_64>>16) & 3)==0) && (((val_64>>18) & 3)!=0)) ||
((((val_64>>20) & 3)==0) && (((val_64>>22) & 3)!=0)) ||
((((val_64>>24) & 3)==0) && (((val_64>>26) & 3)!=0)) ||
((((val_64>>28) & 3)==0) && (((val_64>>30) & 3)!=0)))
{
// Instruction breakpoint with LENx not 00b (1-byte length)
BX_ERROR(("MOV_DqRq: write of %08x:%08x, R/W=00b LEN!=00b",
(Bit32u)(val_64 >> 32), (Bit32u)(val_64 & 0xFFFFFFFF)));
}
// Pentium+: bits15,14,12 are hardwired to 0, rest are settable.
// Even bits 11,10 are changeable though reserved.
BX_CPU_THIS_PTR dr7 = (val_64 & 0xffff2fff) | 0x00000400;
#if BX_X86_DEBUGGER
// if we have code breakpoints enabled then we must check
// breakpoints condition in cpu loop
if (BX_CPU_THIS_PTR dr7 & 0xff) {
if (((BX_CPU_THIS_PTR dr7 >> 16) & 3) == 0 ||
((BX_CPU_THIS_PTR dr7 >> 20) & 3) == 0 ||
((BX_CPU_THIS_PTR dr7 >> 24) & 3) == 0 ||
((BX_CPU_THIS_PTR dr7 >> 28) & 3) == 0)
{
BX_INFO(("MOV_DdRd(): code breakpoint is set"));
BX_CPU_THIS_PTR async_event = 1;
}
}
#endif
break;
default:
BX_ERROR(("MOV_DqRq: #UD - register index out of range"));
exception(BX_UD_EXCEPTION, 0, 0);
}
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_RqDq(bxInstruction_c *i)
{
Bit64u val_64;
#if BX_SUPPORT_VMX
VMexit_DR_Access(i, 1 /* read */);
#endif
if (BX_CPU_THIS_PTR cr4.get_DE()) {
if ((i->nnn() & 0xE) == 4) {
BX_ERROR(("MOV_RqDq: access to DR4/DR5 causes #UD"));
exception(BX_UD_EXCEPTION, 0, 0);
}
}
// Note: processor clears GD upon entering debug exception
// handler, to allow access to the debug registers
if (BX_CPU_THIS_PTR dr7 & 0x2000) { // GD bit set
BX_ERROR(("MOV_RqDq: DR7 GD bit is set"));
BX_CPU_THIS_PTR debug_trap |= BX_DEBUG_DR_ACCESS_BIT;
exception(BX_DB_EXCEPTION, 0, 0);
}
/* #GP(0) if CPL is not 0 */
if (CPL != 0) {
BX_ERROR(("MOV_RqDq: #GP(0) if CPL is not 0"));
exception(BX_GP_EXCEPTION, 0, 0);
}
/* This instruction is always treated as a register-to-register,
* regardless of the encoding of the MOD field in the MODRM byte.
*/
if (!i->modC0())
BX_PANIC(("MOV_RqDq(): rm field not a register!"));
switch (i->nnn()) {
case 0: // DR0
case 1: // DR1
case 2: // DR2
case 3: // DR3
val_64 = BX_CPU_THIS_PTR dr[i->nnn()];
break;
case 4: // DR4
// DR4 aliased to DR6 by default. With Debug Extensions ON,
// access to DR4 causes #UD
case 6: // DR6
val_64 = BX_CPU_THIS_PTR dr6;
break;
case 5: // DR5
// DR5 aliased to DR7 by default. With Debug Extensions ON,
// access to DR5 causes #UD
case 7: // DR7
val_64 = BX_CPU_THIS_PTR dr7;
break;
default:
BX_ERROR(("MOV_RqDq: #UD - register index out of range"));
exception(BX_UD_EXCEPTION, 0, 0);
}
BX_WRITE_64BIT_REG(i->rm(), val_64);
}
#endif // #if BX_SUPPORT_X86_64
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_CdRd(bxInstruction_c *i)
{
if (!real_mode() && CPL!=0) {
BX_ERROR(("MOV_CdRd: CPL!=0 not in real mode"));
exception(BX_GP_EXCEPTION, 0, 0);
}
/* NOTES:
* 32bit operands always used
* r/m field specifies general register
* reg field specifies which special register
*/
/* This instruction is always treated as a register-to-register,
* regardless of the encoding of the MOD field in the MODRM byte.
*/
if (!i->modC0())
BX_PANIC(("MOV_CdRd(): rm field not a register!"));
Bit32u val_32 = BX_READ_32BIT_REG(i->rm());
switch (i->nnn()) {
case 0: // CR0 (MSW)
#if BX_SUPPORT_VMX
val_32 = VMexit_CR0_Write(i, val_32);
#endif
if (! SetCR0(val_32))
exception(BX_GP_EXCEPTION, 0, 0);
break;
case 2: /* CR2 */
BX_CPU_THIS_PTR cr2 = val_32;
break;
case 3: // CR3
#if BX_SUPPORT_VMX
VMexit_CR3_Write(i, val_32);
#endif
#if BX_CPU_LEVEL >= 6
if (BX_CPU_THIS_PTR cr0.get_PG() && BX_CPU_THIS_PTR cr4.get_PAE() && !long_mode()) {
if (! CheckPDPTR(val_32)) {
BX_ERROR(("SetCR3(): PDPTR check failed !"));
exception(BX_GP_EXCEPTION, 0, 0);
}
}
#endif
SetCR3(val_32);
BX_INSTR_TLB_CNTRL(BX_CPU_ID, BX_INSTR_MOV_CR3, val_32);
break;
#if BX_CPU_LEVEL > 3
case 4: // CR4
#if BX_SUPPORT_VMX
val_32 = VMexit_CR4_Write(i, val_32);
#endif
#if BX_CPU_LEVEL >= 6
if (BX_CPU_THIS_PTR cr0.get_PG() && (val_32 & (1<<5)) != 0 /* PAE */ && !long_mode()) {
if (! CheckPDPTR(BX_CPU_THIS_PTR cr3)) {
BX_ERROR(("SetCR4(): PDPTR check failed !"));
exception(BX_GP_EXCEPTION, 0, 0);
}
}
#endif
// Protected mode: #GP(0) if attempt to write a 1 to
// any reserved bit of CR4
if (! SetCR4(val_32))
exception(BX_GP_EXCEPTION, 0, 0);
break;
#endif
default:
BX_ERROR(("MOV_CdRd: #UD - control register %d index out of range", i->nnn()));
exception(BX_UD_EXCEPTION, 0, 0);
}
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_RdCd(bxInstruction_c *i)
{
// mov control register data to register
Bit32u val_32 = 0;
if (!real_mode() && CPL!=0) {
BX_ERROR(("MOV_RdCd: CPL!=0 not in real mode"));
exception(BX_GP_EXCEPTION, 0, 0);
}
/* NOTES:
* 32bit operands always used
* r/m field specifies general register
* reg field specifies which special register
*/
/* This instruction is always treated as a register-to-register,
* regardless of the encoding of the MOD field in the MODRM byte.
*/
if (!i->modC0())
BX_PANIC(("MOV_RdCd(): rm field not a register!"));
switch (i->nnn()) {
case 0: // CR0 (MSW)
val_32 = (Bit32u) read_CR0(); /* correctly handle VMX */
break;
case 2: /* CR2 */
val_32 = (Bit32u) BX_CPU_THIS_PTR cr2;
break;
case 3: // CR3
#if BX_SUPPORT_VMX
VMexit_CR3_Read(i);
#endif
val_32 = (Bit32u) BX_CPU_THIS_PTR cr3;
break;
case 4: // CR4
#if BX_CPU_LEVEL > 3
val_32 = (Bit32u) read_CR4(); /* correctly handle VMX */
#endif
break;
default:
BX_ERROR(("MOV_RdCd: #UD - control register %d index out of range", i->nnn()));
exception(BX_UD_EXCEPTION, 0, 0);
}
BX_WRITE_32BIT_REGZ(i->rm(), val_32);
}
#if BX_SUPPORT_X86_64
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_CqRq(bxInstruction_c *i)
{
BX_ASSERT(protected_mode());
/* NOTES:
* 64bit operands always used
* r/m field specifies general register
* reg field specifies which special register
*/
/* #GP(0) if CPL is not 0 */
if (CPL!=0) {
BX_ERROR(("MOV_CqRq: #GP(0) if CPL is not 0"));
exception(BX_GP_EXCEPTION, 0, 0);
}
/* This instruction is always treated as a register-to-register,
* regardless of the encoding of the MOD field in the MODRM byte.
*/
if (!i->modC0())
BX_PANIC(("MOV_CqRq(): rm field not a register!"));
Bit64u val_64 = BX_READ_64BIT_REG(i->rm());
switch (i->nnn()) {
case 0: // CR0
#if BX_SUPPORT_VMX
val_64 = VMexit_CR0_Write(i, val_64);
#endif
if (! SetCR0(val_64))
exception(BX_GP_EXCEPTION, 0, 0);
break;
case 2: /* CR2 */
BX_CPU_THIS_PTR cr2 = val_64;
break;
case 3: // CR3
#if BX_SUPPORT_VMX
VMexit_CR3_Write(i, val_64);
#endif
// no PDPTR checks in long mode
SetCR3(val_64);
BX_INSTR_TLB_CNTRL(BX_CPU_ID, BX_INSTR_MOV_CR3, val_64);
break;
case 4: // CR4
#if BX_SUPPORT_VMX
val_64 = VMexit_CR4_Write(i, val_64);
#endif
BX_DEBUG(("MOV_CqRq: write to CR4 of %08x:%08x", GET32H(val_64), GET32L(val_64)));
// no PDPTR checks in long mode
if (! SetCR4(val_64))
exception(BX_GP_EXCEPTION, 0, 0);
break;
case 8: // CR8
#if BX_SUPPORT_VMX
VMexit_CR8_Write(i);
#endif
// CR8 is aliased to APIC->TASK PRIORITY register
// APIC.TPR[7:4] = CR8[3:0]
// APIC.TPR[3:0] = 0
// Reads of CR8 return zero extended APIC.TPR[7:4]
// Write to CR8 update APIC.TPR[7:4]
#if BX_SUPPORT_APIC
if (val_64 & BX_CONST64(0xfffffffffffffff0)) {
BX_ERROR(("MOV_CqRq: Attempt to set reserved bits of CR8"));
exception(BX_GP_EXCEPTION, 0, 0);
}
BX_CPU_THIS_PTR lapic.set_tpr((val_64 & 0xF) << 0x4);
break;
#endif
default:
BX_ERROR(("MOV_CqRq: #UD - control register %d index out of range", i->nnn()));
exception(BX_UD_EXCEPTION, 0, 0);
}
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_RqCq(bxInstruction_c *i)
{
// mov control register data to register
Bit64u val_64 = 0;
BX_ASSERT(protected_mode());
/* NOTES:
* 64bit operands always used
* r/m field specifies general register
* reg field specifies which special register
*/
/* #GP(0) if CPL is not 0 */
if (CPL!=0) {
BX_ERROR(("MOV_RqCq: #GP(0) if CPL is not 0"));
exception(BX_GP_EXCEPTION, 0, 0);
}
/* This instruction is always treated as a register-to-register,
* regardless of the encoding of the MOD field in the MODRM byte.
*/
if (!i->modC0())
BX_PANIC(("MOV_RqCq(): rm field not a register!"));
switch (i->nnn()) {
case 0: // CR0 (MSW)
val_64 = read_CR0(); /* correctly handle VMX */
break;
case 2: /* CR2 */
val_64 = BX_CPU_THIS_PTR cr2;
break;
case 3: // CR3
#if BX_SUPPORT_VMX
VMexit_CR3_Read(i);
#endif
val_64 = BX_CPU_THIS_PTR cr3;
break;
case 4: // CR4
val_64 = read_CR4(); /* correctly handle VMX */
break;
case 8: // CR8
#if BX_SUPPORT_VMX
VMexit_CR8_Read(i);
#endif
// CR8 is aliased to APIC->TASK PRIORITY register
// APIC.TPR[7:4] = CR8[3:0]
// APIC.TPR[3:0] = 0
// Reads of CR8 return zero extended APIC.TPR[7:4]
// Write to CR8 update APIC.TPR[7:4]
#if BX_SUPPORT_APIC
val_64 = (BX_CPU_THIS_PTR lapic.get_tpr() >> 4) & 0xF;
break;
#endif
default:
BX_ERROR(("MOV_RqCq: #UD - control register %d index out of range", i->nnn()));
exception(BX_UD_EXCEPTION, 0, 0);
}
BX_WRITE_64BIT_REG(i->rm(), val_64);
}
#endif // #if BX_SUPPORT_X86_64
void BX_CPP_AttrRegparmN(1) BX_CPU_C::LMSW_Ew(bxInstruction_c *i)
{
Bit16u msw;
if (!real_mode() && CPL!=0) {
BX_ERROR(("LMSW: CPL!=0 not in real mode"));
exception(BX_GP_EXCEPTION, 0, 0);
}
if (i->modC0()) {
msw = BX_READ_16BIT_REG(i->rm());
}
else {
/* use RMAddr(i) to save address for VMexit */
RMAddr(i) = BX_CPU_CALL_METHODR(i->ResolveModrm, (i));
/* pointer, segment address pair */
msw = read_virtual_word(i->seg(), RMAddr(i));
}
// LMSW does not affect PG,CD,NW,AM,WP,NE,ET bits, and cannot clear PE
#if BX_SUPPORT_VMX
msw = VMexit_LMSW(i, msw);
#endif
// LMSW cannot clear PE
if (BX_CPU_THIS_PTR cr0.get_PE())
msw |= 0x1; // adjust PE bit to current value of 1
msw &= 0xf; // LMSW only affects last 4 flags
Bit32u cr0 = (BX_CPU_THIS_PTR cr0.get32() & 0xfffffff0) | msw;
if (! SetCR0(cr0))
exception(BX_GP_EXCEPTION, 0, 0);
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::SMSW_EwR(bxInstruction_c *i)
{
Bit32u msw = (Bit32u) read_CR0(); // handle CR0 shadow in VMX
if (i->os32L()) {
BX_WRITE_32BIT_REGZ(i->rm(), msw);
}
else {
BX_WRITE_16BIT_REG(i->rm(), msw & 0xffff);
}
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::SMSW_EwM(bxInstruction_c *i)
{
Bit16u msw = read_CR0() & 0xffff; // handle CR0 shadow in VMX
bx_address eaddr = BX_CPU_CALL_METHODR(i->ResolveModrm, (i));
write_virtual_word(i->seg(), eaddr, msw);
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_TdRd(bxInstruction_c *i)
{
#if BX_CPU_LEVEL <= 4
BX_PANIC(("MOV_TdRd: Still not implemented"));
#else
// Pentium+ does not have TRx. They were redesigned using the MSRs.
BX_INFO(("MOV_TdRd: causes #UD"));
exception(BX_UD_EXCEPTION, 0, 0);
#endif
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_RdTd(bxInstruction_c *i)
{
#if BX_CPU_LEVEL <= 4
BX_PANIC(("MOV_RdTd: Still not implemented"));
#else
// Pentium+ does not have TRx. They were redesigned using the MSRs.
BX_INFO(("MOV_RdTd: causes #UD"));
exception(BX_UD_EXCEPTION, 0, 0);
#endif
}
#if BX_CPU_LEVEL == 2
void BX_CPP_AttrRegparmN(1) BX_CPU_C::LOADALL(bxInstruction_c *i)
{
Bit16u msw, tr, flags, ip, ldtr;
Bit16u ds_raw, ss_raw, cs_raw, es_raw;
Bit16u base_15_0, limit;
Bit8u base_23_16, access;
if (v8086_mode()) BX_PANIC(("proc_ctrl: LOADALL in v8086 mode unsupported"));
if (BX_CPU_THIS_PTR cr0.get_PE())
{
BX_PANIC(("LOADALL not yet supported for protected mode"));
}
BX_PANIC(("LOADALL: handle CR0.val32"));
/* MSW */
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x806, 2, &msw);
BX_CPU_THIS_PTR cr0.set_PE(msw & 0x01); msw >>= 1;
BX_CPU_THIS_PTR cr0.set_MP(msw & 0x01); msw >>= 1;
BX_CPU_THIS_PTR cr0.set_EM(msw & 0x01); msw >>= 1;
BX_CPU_THIS_PTR cr0.set_TS(msw & 0x01);
if (BX_CPU_THIS_PTR cr0.get_PE() || BX_CPU_THIS_PTR cr0.get_MP() || BX_CPU_THIS_PTR cr0.get_EM() || BX_CPU_THIS_PTR cr0.get_TS())
BX_PANIC(("LOADALL set PE, MP, EM or TS bits in MSW!"));
/* TR */
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x816, 2, &tr);
BX_CPU_THIS_PTR tr.selector.value = tr;
BX_CPU_THIS_PTR tr.selector.rpl = (tr & 0x03); tr >>= 2;
BX_CPU_THIS_PTR tr.selector.ti = (tr & 0x01); tr >>= 1;
BX_CPU_THIS_PTR tr.selector.index = tr;
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x860, 2, &base_15_0);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x862, 1, &base_23_16);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x863, 1, &access);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x864, 2, &limit);
BX_CPU_THIS_PTR tr.cache.valid =
BX_CPU_THIS_PTR tr.cache.p = (access & 0x80) >> 7;
BX_CPU_THIS_PTR tr.cache.dpl = (access & 0x60) >> 5;
BX_CPU_THIS_PTR tr.cache.segment = (access & 0x10) >> 4;
// don't allow busy bit in tr.cache.type, so bit 2 is masked away too.
BX_CPU_THIS_PTR tr.cache.type = (access & 0x0d);
BX_CPU_THIS_PTR tr.cache.u.segment.base = (base_23_16 << 16) | base_15_0;
BX_CPU_THIS_PTR tr.cache.u.segment.limit_scaled = limit;
if ((BX_CPU_THIS_PTR tr.selector.value & 0xfffc) == 0) {
BX_CPU_THIS_PTR tr.cache.valid = 0;
}
if (BX_CPU_THIS_PTR tr.cache.u.segment.limit_scaled < 43 ||
BX_CPU_THIS_PTR tr.cache.type != BX_SYS_SEGMENT_AVAIL_286_TSS ||
BX_CPU_THIS_PTR tr.cache.segment)
{
BX_CPU_THIS_PTR tr.cache.valid = 0;
}
if (BX_CPU_THIS_PTR tr.cache.valid==0)
{
BX_CPU_THIS_PTR tr.selector.value = 0;
BX_CPU_THIS_PTR tr.selector.index = 0;
BX_CPU_THIS_PTR tr.selector.ti = 0;
BX_CPU_THIS_PTR tr.selector.rpl = 0;
BX_CPU_THIS_PTR tr.cache.u.segment.base = 0;
BX_CPU_THIS_PTR tr.cache.u.segment.limit_scaled = 0;
BX_CPU_THIS_PTR tr.cache.p = 0;
}
/* FLAGS */
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x818, 2, &flags);
write_flags(flags, 1, 1);
/* IP */
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x81a, 2, &IP);
/* LDTR */
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x81c, 2, &ldtr);
BX_CPU_THIS_PTR ldtr.selector.value = ldtr;
BX_CPU_THIS_PTR ldtr.selector.rpl = (ldtr & 0x03); ldtr >>= 2;
BX_CPU_THIS_PTR ldtr.selector.ti = (ldtr & 0x01); ldtr >>= 1;
BX_CPU_THIS_PTR ldtr.selector.index = ldtr;
if ((BX_CPU_THIS_PTR ldtr.selector.value & 0xfffc) == 0)
{
BX_CPU_THIS_PTR ldtr.cache.valid = 0;
BX_CPU_THIS_PTR ldtr.cache.p = 0;
BX_CPU_THIS_PTR ldtr.cache.segment = 0;
BX_CPU_THIS_PTR ldtr.cache.type = 0;
BX_CPU_THIS_PTR ldtr.cache.u.segment.base = 0;
BX_CPU_THIS_PTR ldtr.cache.u.segment.limit_scaled = 0;
BX_CPU_THIS_PTR ldtr.selector.value = 0;
BX_CPU_THIS_PTR ldtr.selector.index = 0;
BX_CPU_THIS_PTR ldtr.selector.ti = 0;
}
else {
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x854, 2, &base_15_0);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x856, 1, &base_23_16);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x857, 1, &access);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x858, 2, &limit);
BX_CPU_THIS_PTR ldtr.cache.valid =
BX_CPU_THIS_PTR ldtr.cache.p = access >> 7;
BX_CPU_THIS_PTR ldtr.cache.dpl = (access >> 5) & 0x03;
BX_CPU_THIS_PTR ldtr.cache.segment = (access >> 4) & 0x01;
BX_CPU_THIS_PTR ldtr.cache.type = (access & 0x0f);
BX_CPU_THIS_PTR ldtr.cache.u.segment.base = (base_23_16 << 16) | base_15_0;
BX_CPU_THIS_PTR ldtr.cache.u.segment.limit_scaled = limit;
if (access == 0) {
BX_PANIC(("loadall: LDTR case access byte=0"));
}
if (BX_CPU_THIS_PTR ldtr.cache.valid==0) {
BX_PANIC(("loadall: ldtr.valid=0"));
}
if (BX_CPU_THIS_PTR ldtr.cache.segment) { /* not a system segment */
BX_INFO((" AR byte = %02x", (unsigned) access));
BX_PANIC(("loadall: LDTR descriptor cache loaded with non system segment"));
}
if (BX_CPU_THIS_PTR ldtr.cache.type != BX_SYS_SEGMENT_LDT) {
BX_PANIC(("loadall: LDTR.type(%u) != LDT", (unsigned) (access & 0x0f)));
}
}
/* DS */
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x81e, 2, &ds_raw);
parse_selector(ds_raw, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x848, 2, &base_15_0);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x84a, 1, &base_23_16);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x84b, 1, &access);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x84c, 2, &limit);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.u.segment.base = (base_23_16 << 16) | base_15_0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.u.segment.limit_scaled = limit;
set_ar_byte(BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache, access);
if ((BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.value & 0xfffc) == 0) {
BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.valid = 0;
}
else {
BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.valid = 1;
}
if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.valid==0 ||
BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.segment==0)
{
BX_PANIC(("loadall: DS invalid"));
}
/* SS */
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x820, 2, &ss_raw);
parse_selector(ss_raw, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x842, 2, &base_15_0);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x844, 1, &base_23_16);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x845, 1, &access);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x846, 2, &limit);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.base = (base_23_16 << 16) | base_15_0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit_scaled = limit;
set_ar_byte(BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache, access);
if ((BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.value & 0xfffc) == 0) {
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = 0;
}
else {
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = 1;
}
if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid==0 ||
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment==0)
{
BX_PANIC(("loadall: SS invalid"));
}
/* CS */
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x822, 2, &cs_raw);
parse_selector(cs_raw, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x83c, 2, &base_15_0);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x83e, 1, &base_23_16);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x83f, 1, &access);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x840, 2, &limit);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = (base_23_16 << 16) | base_15_0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = limit;
set_ar_byte(BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache, access);
if ((BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value & 0xfffc) == 0) {
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 0;
}
else {
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 1;
}
if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid==0 ||
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment==0)
{
BX_PANIC(("loadall: CS invalid"));
}
handleCpuModeChange();
/* ES */
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x824, 2, &es_raw);
parse_selector(es_raw, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x836, 2, &base_15_0);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x838, 1, &base_23_16);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x839, 1, &access);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x83a, 2, &limit);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.u.segment.base = (base_23_16 << 16) | base_15_0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.u.segment.limit_scaled = limit;
set_ar_byte(BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache, access);
if ((BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.value & 0xfffc) == 0) {
BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.valid = 0;
}
else {
BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.valid = 1;
}
if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.valid==0 ||
BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.segment==0)
{
BX_PANIC(("loadall: ES invalid"));
}
#if 0
BX_INFO(("cs.dpl = %02x", (unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl));
BX_INFO(("ss.dpl = %02x", (unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl));
BX_INFO(("BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].dpl = 0x%02x", (unsigned) BX_CPU_THIS_PTR ds.cache.dpl));
BX_INFO(("BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].dpl = 0x%02x", (unsigned) BX_CPU_THIS_PTR es.cache.dpl));
BX_INFO(("LOADALL: setting cs.selector.rpl to %u",
(unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.rpl));
BX_INFO(("LOADALL: setting ss.selector.rpl to %u",
(unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.rpl));
BX_INFO(("LOADALL: setting ds.selector.rpl to %u",
(unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.rpl));
BX_INFO(("LOADALL: setting es.selector.rpl to %u",
(unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.rpl));
#endif
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x826, 2, &DI);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x828, 2, &SI);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x82a, 2, &BP);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x82c, 2, &SP);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x82e, 2, &BX);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x830, 2, &DX);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x832, 2, &CX);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x834, 2, &AX);
/* GDTR */
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x84e, 2, &base_15_0);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x850, 1, &base_23_16);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x851, 1, &access);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x852, 2, &limit);
BX_CPU_THIS_PTR gdtr.base = (base_23_16 << 16) | base_15_0;
BX_CPU_THIS_PTR gdtr.limit = limit;
/* IDTR */
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x85a, 2, &base_15_0);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x85c, 1, &base_23_16);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x85d, 1, &access);
BX_MEM(0)->readPhysicalPage(BX_CPU_THIS, 0x85e, 2, &limit);
BX_CPU_THIS_PTR idtr.base = (base_23_16 << 16) | base_15_0;
BX_CPU_THIS_PTR idtr.limit = limit;
}
#endif
void BX_CPU_C::handleCpuModeChange(void)
{
unsigned mode = BX_CPU_THIS_PTR cpu_mode;
#if BX_SUPPORT_X86_64
if (BX_CPU_THIS_PTR efer.get_LMA()) {
if (! BX_CPU_THIS_PTR cr0.get_PE()) {
BX_PANIC(("change_cpu_mode: EFER.LMA is set when CR0.PE=0 !"));
}
if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l) {
BX_CPU_THIS_PTR cpu_mode = BX_MODE_LONG_64;
}
else {
BX_CPU_THIS_PTR cpu_mode = BX_MODE_LONG_COMPAT;
// clear upper part of RIP/RSP when leaving 64-bit long mode
BX_CLEAR_64BIT_HIGH(BX_64BIT_REG_RIP);
BX_CLEAR_64BIT_HIGH(BX_64BIT_REG_RSP);
}
}
else
#endif
{
if (BX_CPU_THIS_PTR cr0.get_PE()) {
if (BX_CPU_THIS_PTR get_VM()) {
BX_CPU_THIS_PTR cpu_mode = BX_MODE_IA32_V8086;
}
else
BX_CPU_THIS_PTR cpu_mode = BX_MODE_IA32_PROTECTED;
}
else {
BX_CPU_THIS_PTR cpu_mode = BX_MODE_IA32_REAL;
// CS segment in real mode always allows full access
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_ASSERT(CPL == 0);
}
}
updateFetchModeMask();
if (mode != BX_CPU_THIS_PTR cpu_mode) {
BX_DEBUG(("%s activated", cpu_mode_string(BX_CPU_THIS_PTR cpu_mode)));
#if BX_DEBUGGER
if (BX_CPU_THIS_PTR mode_break) {
BX_CPU_THIS_PTR stop_reason = STOP_MODE_BREAK_POINT;
bx_debug_break(); // trap into debugger
}
#endif
}
}
#if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK
void BX_CPU_C::handleAlignmentCheck(void)
{
if (CPL == 3 && BX_CPU_THIS_PTR cr0.get_AM() && BX_CPU_THIS_PTR get_AC()) {
if (BX_CPU_THIS_PTR alignment_check_mask == 0) {
BX_CPU_THIS_PTR alignment_check_mask = 0xF;
BX_INFO(("Enable alignment check (#AC exception)"));
BX_CPU_THIS_PTR iCache.flushICacheEntries();
}
}
else {
if (BX_CPU_THIS_PTR alignment_check_mask != 0) {
BX_CPU_THIS_PTR alignment_check_mask = 0;
BX_INFO(("Disable alignment check (#AC exception)"));
BX_CPU_THIS_PTR iCache.flushICacheEntries();
}
}
}
#endif
bx_address BX_CPU_C::read_CR0(void)
{
bx_address cr0_val = BX_CPU_THIS_PTR cr0.get32();
#if BX_SUPPORT_VMX
if (BX_CPU_THIS_PTR in_vmx_guest) {
VMCS_CACHE *vm = &BX_CPU_THIS_PTR vmcs;
cr0_val = (cr0_val & ~vm->vm_cr0_mask) | (vm->vm_cr0_read_shadow & vm->vm_cr0_mask);
}
#endif
return cr0_val;
}
#if BX_CPU_LEVEL > 3
bx_address BX_CPU_C::read_CR4(void)
{
bx_address cr4_val = BX_CPU_THIS_PTR cr4.get32();
#if BX_SUPPORT_VMX
if (BX_CPU_THIS_PTR in_vmx_guest) {
VMCS_CACHE *vm = &BX_CPU_THIS_PTR vmcs;
cr4_val = (cr4_val & ~vm->vm_cr4_mask) | (vm->vm_cr4_read_shadow & vm->vm_cr4_mask);
}
#endif
return cr4_val;
}
#endif
bx_bool BX_CPP_AttrRegparmN(1) BX_CPU_C::SetCR0(bx_address val)
{
#if BX_SUPPORT_X86_64
if (GET32H(val)) {
BX_ERROR(("SetCR0: GP(0) when trying to set CR0 > 32 bits"));
return 0;
}
#endif
Bit32u val_32 = GET32L(val);
bx_bool pe = val_32 & 0x1;
bx_bool nw = (val_32 >> 29) & 0x1;
bx_bool cd = (val_32 >> 30) & 0x1;
bx_bool pg = (val_32 >> 31) & 0x1;
if (pg && !pe) {
BX_ERROR(("SetCR0: GP(0) when attempt to set CR0.PG with CR0.PE cleared !"));
return 0;
}
if (nw && !cd) {
BX_ERROR(("SetCR0: GP(0) when attempt to set CR0.NW with CR0.CD cleared !"));
return 0;
}
#if BX_SUPPORT_VMX
if (BX_CPU_THIS_PTR in_vmx) {
bx_bool ne = (val_32 >> 5) & 0x1;
if (!pe || !ne || !pg) {
BX_ERROR(("Attempt to clear CR0.PE/CR0.NE/CR0.PG in vmx mode"));
return 0;
}
}
#endif
// from either MOV_CdRd() or debug functions
// protection checks made already or forcing from debug
Bit32u oldCR0 = BX_CPU_THIS_PTR cr0.get32();
#if BX_SUPPORT_X86_64
bx_bool prev_pg = BX_CPU_THIS_PTR cr0.get_PG();
if (prev_pg==0 && pg) {
if (BX_CPU_THIS_PTR efer.get_LME()) {
if (!BX_CPU_THIS_PTR cr4.get_PAE()) {
BX_ERROR(("SetCR0: attempt to enter x86-64 long mode without enabling CR4.PAE !"));
return 0;
}
if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l) {
BX_ERROR(("SetCR0: attempt to enter x86-64 long mode with CS.L !"));
return 0;
}
if (BX_CPU_THIS_PTR tr.cache.type <= 3) {
BX_ERROR(("SetCR0: attempt to enter x86-64 long mode with TSS286 in TR !"));
return 0;
}
BX_CPU_THIS_PTR efer.set_LMA(1);
}
#if BX_CPU_LEVEL >= 6
if (BX_CPU_THIS_PTR cr4.get_PAE() && !long_mode()) {
if (! CheckPDPTR(BX_CPU_THIS_PTR cr3)) {
BX_ERROR(("SetCR0(): PDPTR check failed !"));
return 0;
}
}
#endif
}
else if (prev_pg==1 && ! pg) {
if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64) {
BX_ERROR(("SetCR0: attempt to leave 64 bit mode directly to legacy mode !"));
return 0;
}
if (BX_CPU_THIS_PTR efer.get_LMA()) {
if (BX_CPU_THIS_PTR gen_reg[BX_64BIT_REG_RIP].dword.hrx != 0) {
BX_PANIC(("SetCR0: attempt to leave x86-64 LONG mode with RIP upper != 0 !!!"));
}
BX_CPU_THIS_PTR efer.set_LMA(0);
}
}
#endif // #if BX_SUPPORT_X86_64
// handle reserved bits behaviour
#if BX_CPU_LEVEL == 3
val_32 = val_32 | 0x7ffffff0;
#elif BX_CPU_LEVEL == 4
val_32 = (val_32 | 0x00000010) & 0xe005003f;
#elif BX_CPU_LEVEL == 5
val_32 = val_32 | 0x00000010;
#elif BX_CPU_LEVEL == 6
val_32 = (val_32 | 0x00000010) & 0xe005003f;
#else
#error "SetCR0: implement reserved bits behaviour for this CPU_LEVEL"
#endif
BX_CPU_THIS_PTR cr0.set32(val_32);
#if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK
handleAlignmentCheck();
#endif
handleCpuModeChange();
// Give the paging unit a chance to look for changes in bits
// it cares about, like {PG,PE}, so it can flush cache entries etc.
pagingCR0Changed(oldCR0, val_32);
return 1;
}
#if BX_CPU_LEVEL >= 4
bx_address get_cr4_allow_mask(void)
{
bx_address allowMask = 0;
// CR4 bits definitions:
// [31-19] Reserved, Must be Zero
// [18] OSXSAVE: Operating System XSAVE Support R/W
// [17-15] Reserved, Must be Zero
// [14] SMXE: SMX Extensions R/W
// [13] VMXE: VMX Extensions R/W
// [12-11] Reserved, Must be Zero
// [10] OSXMMEXCPT: Operating System Unmasked Exception Support R/W
// [9] OSFXSR: Operating System FXSAVE/FXRSTOR Support R/W
// [8] PCE: Performance-Monitoring Counter Enable R/W
// [7] PGE: Page-Global Enable R/W
// [6] MCE: Machine Check Enable R/W
// [5] PAE: Physical-Address Extension R/W
// [4] PSE: Page Size Extensions R/W
// [3] DE: Debugging Extensions R/W
// [2] TSD: Time Stamp Disable R/W
// [1] PVI: Protected-Mode Virtual Interrupts R/W
// [0] VME: Virtual-8086 Mode Extensions R/W
#if BX_CPU_LEVEL >= 5
allowMask |= (1<<0) | (1<<1); /* VME */
#endif
#if BX_CPU_LEVEL >= 5
allowMask |= (1<<2); /* TSD */
#endif
allowMask |= (1<<3); /* DE */
#if BX_CPU_LEVEL >= 5
allowMask |= (1<<4); /* PSE */
#endif
#if BX_CPU_LEVEL >= 6
allowMask |= (1<<5); /* PAE */
#endif
#if BX_CPU_LEVEL >= 5
// NOTE: exception 18 (#MC) never appears in Bochs
allowMask |= (1<<6); /* MCE */
#endif
#if BX_CPU_LEVEL >= 6
allowMask |= (1<<7); /* PGE */
allowMask |= (1<<8); /* PCE */
allowMask |= (1<<9); /* OSFXSR */
#endif
#if BX_SUPPORT_SSE
allowMask |= (1<<10); /* OSXMMECPT */
#endif
#if BX_SUPPORT_VMX
allowMask |= (1<<13); /* VMX Enable */
#endif
#if BX_SUPPORT_XSAVE
allowMask |= (1<<18); /* OSXSAVE */
#endif
return allowMask;
}
bx_bool BX_CPP_AttrRegparmN(1) BX_CPU_C::SetCR4(bx_address val)
{
Bit32u oldCR4 = BX_CPU_THIS_PTR cr4.get32();
bx_address allowMask = get_cr4_allow_mask();
#if BX_SUPPORT_X86_64
// need to GP(0) if LMA=1 and PAE=1->0
if (BX_CPU_THIS_PTR efer.get_LMA()) {
if(!(val & (1<<5)) && BX_CPU_THIS_PTR cr4.get_PAE()) {
BX_ERROR(("SetCR4(): attempt to change PAE when EFER.LMA=1"));
return 0;
}
}
#endif
#if BX_SUPPORT_VMX
if (!(val & (1 << 13)) && BX_CPU_THIS_PTR in_vmx) {
BX_ERROR(("SetCR4(): Attempt to clear CR4.VMXE in vmx mode"));
exception(BX_GP_EXCEPTION, 0, 0);
}
#endif
// Need to GPF if trying to set undefined bits.
if (val & ~allowMask) {
BX_ERROR(("#GP(0): SetCR4: Write of 0x%08x not supported (allowMask=0x%x)", (Bit32u) val, (Bit32u) allowMask));
return 0;
}
BX_CPU_THIS_PTR cr4.set32(val);
pagingCR4Changed(oldCR4, BX_CPU_THIS_PTR cr4.get32());
return 1;
}
#endif // BX_CPU_LEVEL >= 4
void BX_CPP_AttrRegparmN(1) BX_CPU_C::RDPMC(bxInstruction_c *i)
{
/* We need to be Pentium with MMX or later */
#if (BX_CPU_LEVEL >= 6) || (BX_SUPPORT_MMX && BX_CPU_LEVEL == 5)
bx_bool pce = BX_CPU_THIS_PTR cr4.get_PCE();
if ((pce==1) || (CPL==0) || real_mode())
{
#if BX_SUPPORT_VMX
VMexit_RDPMC(i);
#endif
/* According to manual, Pentium 4 has 18 counters,
* previous versions have two. And the P4 also can do
* short read-out (EDX always 0). Otherwise it is
* limited to 40 bits.
*/
#if (BX_CPU_LEVEL == 6 && BX_SUPPORT_SSE >= 2) // Pentium 4 processor (see cpuid.cc)
if ((ECX & 0x7fffffff) >= 18)
exception(BX_GP_EXCEPTION, 0, 0);
#else //
if ((ECX & 0xffffffff) >= 2)
exception(BX_GP_EXCEPTION, 0, 0);
#endif
// Most counters are for hardware specific details, which
// we anyhow do not emulate (like pipeline stalls etc)
// Could be interesting to count number of memory reads,
// writes. Misaligned etc... But to monitor bochs, this
// is easier done from the host.
RAX = 0;
RDX = 0; // if P4 and ECX & 0x10000000, then always 0 (short read 32 bits)
BX_ERROR(("RDPMC: Performance Counters Support not reasonably implemented yet"));
} else {
// not allowed to use RDPMC!
exception(BX_GP_EXCEPTION, 0, 0);
}
#else
exception(BX_UD_EXCEPTION, 0, 0);
#endif
}
#if BX_CPU_LEVEL >= 5
Bit64u BX_CPU_C::get_TSC(void)
{
Bit64u tsc = bx_pc_system.time_ticks() - BX_CPU_THIS_PTR msr.tsc_last_reset;
#if BX_SUPPORT_VMX
tsc += VMX_TSC_Offset();
#endif
return tsc;
}
void BX_CPU_C::set_TSC(Bit64u newval)
{
// compute the correct setting of tsc_last_reset so that a get_TSC()
// will return newval
BX_CPU_THIS_PTR msr.tsc_last_reset = bx_pc_system.time_ticks() - newval;
// verify
BX_ASSERT(get_TSC() == newval);
}
#endif
void BX_CPP_AttrRegparmN(1) BX_CPU_C::RDTSC(bxInstruction_c *i)
{
#if BX_CPU_LEVEL >= 5
if (! BX_CPU_THIS_PTR cr4.get_TSD() || CPL==0) {
#if BX_SUPPORT_VMX
VMexit_RDTSC(i);
#endif
// return ticks
Bit64u ticks = BX_CPU_THIS_PTR get_TSC();
RAX = GET32L(ticks);
RDX = GET32H(ticks);
} else {
BX_ERROR(("RDTSC: not allowed to use instruction !"));
exception(BX_GP_EXCEPTION, 0, 0);
}
#else
BX_INFO(("RDTSC: Pentium CPU required, use --enable-cpu=5"));
exception(BX_UD_EXCEPTION, 0, 0);
#endif
}
#if BX_SUPPORT_X86_64
void BX_CPP_AttrRegparmN(1) BX_CPU_C::RDTSCP(bxInstruction_c *i)
{
RDTSC(i);
RCX = MSR_TSC_AUX;
}
#endif
#if BX_SUPPORT_MONITOR_MWAIT
bx_bool BX_CPU_C::is_monitor(bx_phy_address begin_addr, unsigned len)
{
bx_phy_address end_addr = begin_addr + len;
if (begin_addr >= BX_CPU_THIS_PTR monitor.monitor_end || end_addr <= BX_CPU_THIS_PTR monitor.monitor_begin)
return 0;
else
return 1;
}
void BX_CPU_C::check_monitor(bx_phy_address begin_addr, unsigned len)
{
if (is_monitor(begin_addr, len)) {
// wakeup from MWAIT state
BX_ASSERT(BX_CPU_THIS_PTR activity_state >= BX_ACTIVITY_STATE_MWAIT);
BX_CPU_THIS_PTR activity_state = BX_ACTIVITY_STATE_ACTIVE;
// clear monitor
BX_MEM(0)->clear_monitor(BX_CPU_THIS_PTR bx_cpuid);
BX_CPU_THIS_PTR monitor.reset_monitor();
}
}
#endif
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MONITOR(bxInstruction_c *i)
{
#if BX_SUPPORT_MONITOR_MWAIT
if (!real_mode() && CPL != 0) {
BX_DEBUG(("MWAIT instruction not recognized when CPL != 0"));
exception(BX_UD_EXCEPTION, 0, 0);
}
BX_DEBUG(("MONITOR instruction executed EAX = 0x08x", (unsigned) EAX));
#if BX_SUPPORT_VMX
VMexit_MONITOR(i);
#endif
if (RCX != 0) {
BX_ERROR(("MONITOR: no optional extensions supported"));
exception(BX_GP_EXCEPTION, 0, 0);
}
bx_segment_reg_t *seg = &BX_CPU_THIS_PTR sregs[i->seg()];
bx_address offset;
#if BX_SUPPORT_X86_64
if (i->as64L()) {
offset = RAX;
}
else
#endif
if (i->as32L()) {
offset = EAX;
}
else {
offset = AX;
}
// set MONITOR
bx_address laddr = BX_CPU_THIS_PTR get_laddr(i->seg(), offset);
#if BX_SUPPORT_X86_64
if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64) {
if (! IsCanonical(laddr)) {
BX_ERROR(("MONITOR: non-canonical access !"));
exception(int_number(i->seg()), 0, 0);
}
}
else
#endif
{
// check if we could access the memory segment
if (!(seg->cache.valid & SegAccessROK)) {
if (! read_virtual_checks(seg, offset, 1))
exception(int_number(i->seg()), 0, 0);
}
else {
if (offset > seg->cache.u.segment.limit_scaled) {
BX_ERROR(("MONITOR: segment limit violation"));
exception(int_number(i->seg()), 0, 0);
}
}
}
bx_phy_address paddr;
if (BX_CPU_THIS_PTR cr0.get_PG()) {
paddr = dtranslate_linear(laddr, CPL, BX_READ);
paddr = A20ADDR(paddr);
}
else
{
paddr = A20ADDR(laddr);
}
BX_CPU_THIS_PTR monitor.monitor_begin = paddr;
BX_CPU_THIS_PTR monitor.monitor_end = paddr + CACHE_LINE_SIZE;
// Set the monitor immediately. If monitor is still armed when we MWAIT,
// the processor will stall.
bx_pc_system.invlpg(BX_CPU_THIS_PTR monitor.monitor_begin);
if ((BX_CPU_THIS_PTR monitor.monitor_end & ~0xfff) != (BX_CPU_THIS_PTR monitor.monitor_begin & ~0xfff))
bx_pc_system.invlpg(BX_CPU_THIS_PTR monitor.monitor_end);
BX_DEBUG(("MONITOR for phys_addr=0x" FMT_PHY_ADDRX, BX_CPU_THIS_PTR monitor.monitor_begin));
BX_MEM(0)->set_monitor(BX_CPU_THIS_PTR bx_cpuid);
#else
BX_INFO(("MONITOR: use --enable-monitor-mwait to enable MONITOR/MWAIT support"));
exception(BX_UD_EXCEPTION, 0, 0);
#endif
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::MWAIT(bxInstruction_c *i)
{
#if BX_SUPPORT_MONITOR_MWAIT
if (!real_mode() && CPL != 0) {
BX_DEBUG(("MWAIT instruction not recognized when CPL != 0"));
exception(BX_UD_EXCEPTION, 0, 0);
}
BX_DEBUG(("MWAIT instruction executed ECX = 0x%08x", ECX));
#if BX_SUPPORT_VMX
VMexit_MWAIT(i);
#endif
// only one extension is supported
// ECX[0] - interrupt MWAIT even if EFLAGS.IF = 0
if (RCX & ~(BX_CONST64(1))) {
BX_ERROR(("MWAIT: incorrect optional extensions in RCX"));
exception(BX_GP_EXCEPTION, 0, 0);
}
// Do not enter optimized state if MONITOR wasn't properly set
if (BX_CPU_THIS_PTR monitor.monitor_begin == BX_CPU_THIS_PTR monitor.monitor_end) {
BX_DEBUG(("MWAIT: incorrect MONITOR settings"));
return;
}
// If monitor has already triggered, we just return.
if (!BX_CPU_THIS_PTR monitor.armed) {
BX_DEBUG(("MWAIT: the MONITOR was already triggered"));
return;
}
// stops instruction execution and places the processor in a optimized
// state. Events that cause exit from MWAIT state are:
// A store from another processor to monitored range, any unmasked
// interrupt, including INTR, NMI, SMI, INIT or reset will resume
// the execution. Any far control transfer between MONITOR and MWAIT
// resets the monitoring logic.
if (ECX & 1)
BX_CPU_THIS_PTR activity_state = BX_ACTIVITY_STATE_MWAIT_IF;
else
BX_CPU_THIS_PTR activity_state = BX_ACTIVITY_STATE_MWAIT;
BX_CPU_THIS_PTR async_event = 1; // so processor knows to check
// Execution of this instruction completes. The processor
// will remain in a optimized state until one of the above
// conditions is met.
BX_INSTR_MWAIT(BX_CPU_ID, BX_CPU_THIS_PTR monitor.monitor_begin, CACHE_LINE_SIZE, ECX);
#if BX_USE_IDLE_HACK
bx_gui->sim_is_idle();
#endif
#if BX_DEBUGGER
bx_dbg_halt(BX_CPU_ID);
#endif
#else
BX_INFO(("MWAIT: use --enable-monitor-mwait to enable MONITOR/MWAIT support"));
exception(BX_UD_EXCEPTION, 0, 0);
#endif
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::SYSENTER(bxInstruction_c *i)
{
#if BX_SUPPORT_SEP
if (real_mode()) {
BX_ERROR(("SYSENTER not recognized in real mode !"));
exception(BX_GP_EXCEPTION, 0, 0);
}
if ((BX_CPU_THIS_PTR msr.sysenter_cs_msr & BX_SELECTOR_RPL_MASK) == 0) {
BX_ERROR(("SYSENTER with zero sysenter_cs_msr !"));
exception(BX_GP_EXCEPTION, 0, 0);
}
invalidate_prefetch_q();
BX_CPU_THIS_PTR clear_VM(); // do this just like the book says to do
BX_CPU_THIS_PTR clear_IF();
BX_CPU_THIS_PTR clear_RF();
#if BX_SUPPORT_X86_64
if (long_mode()) {
if (!IsCanonical(BX_CPU_THIS_PTR msr.sysenter_eip_msr)) {
BX_ERROR(("SYSENTER with non-canonical SYSENTER_EIP_MSR !"));
exception(BX_GP_EXCEPTION, 0, 0);
}
if (!IsCanonical(BX_CPU_THIS_PTR msr.sysenter_esp_msr)) {
BX_ERROR(("SYSENTER with non-canonical SYSENTER_ESP_MSR !"));
exception(BX_GP_EXCEPTION, 0, 0);
}
}
#endif
parse_selector(BX_CPU_THIS_PTR msr.sysenter_cs_msr & BX_SELECTOR_RPL_MASK,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; // base address
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; // scaled segment limit
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; // 4k granularity
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; // available for use by system
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = !long_mode();
#if BX_SUPPORT_X86_64
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = long_mode();
#endif
#if BX_SUPPORT_X86_64
handleCpuModeChange(); // mode change could happen only when in long_mode()
#else
updateFetchModeMask();
#endif
#if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK
BX_CPU_THIS_PTR alignment_check_mask = 0; // CPL=0
#endif
parse_selector((BX_CPU_THIS_PTR msr.sysenter_cs_msr + 8) & BX_SELECTOR_RPL_MASK,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.base = 0; // base address
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit_scaled = 0xFFFFFFFF; // scaled segment limit
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.g = 1; // 4k granularity
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.d_b = 1; // 32-bit mode
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.avl = 0; // available for use by system
#if BX_SUPPORT_X86_64
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.l = 0;
#endif
#if BX_SUPPORT_X86_64
if (long_mode()) {
RSP = BX_CPU_THIS_PTR msr.sysenter_esp_msr;
RIP = BX_CPU_THIS_PTR msr.sysenter_eip_msr;
}
else
#endif
{
ESP = (Bit32u) BX_CPU_THIS_PTR msr.sysenter_esp_msr;
EIP = (Bit32u) BX_CPU_THIS_PTR msr.sysenter_eip_msr;
}
BX_INSTR_FAR_BRANCH(BX_CPU_ID, BX_INSTR_IS_SYSENTER,
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, RIP);
#else
BX_INFO(("SYSENTER: use --enable-sep to enable SYSENTER/SYSEXIT support"));
exception(BX_UD_EXCEPTION, 0, 0);
#endif
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::SYSEXIT(bxInstruction_c *i)
{
#if BX_SUPPORT_SEP
if (real_mode() || CPL != 0) {
BX_ERROR(("SYSEXIT from real mode or with CPL<>0 !"));
exception(BX_GP_EXCEPTION, 0, 0);
}
if ((BX_CPU_THIS_PTR msr.sysenter_cs_msr & BX_SELECTOR_RPL_MASK) == 0) {
BX_ERROR(("SYSEXIT with zero sysenter_cs_msr !"));
exception(BX_GP_EXCEPTION, 0, 0);
}
#if BX_SUPPORT_X86_64
if (i->os64L()) {
if (!IsCanonical(RDX)) {
BX_ERROR(("SYSEXIT with non-canonical RDX (RIP) pointer !"));
exception(BX_GP_EXCEPTION, 0, 0);
}
if (!IsCanonical(RCX)) {
BX_ERROR(("SYSEXIT with non-canonical RCX (RSP) pointer !"));
exception(BX_GP_EXCEPTION, 0, 0);
}
}
#endif
invalidate_prefetch_q();
#if BX_SUPPORT_X86_64
if (i->os64L()) {
parse_selector(((BX_CPU_THIS_PTR msr.sysenter_cs_msr + 32) & BX_SELECTOR_RPL_MASK) | 3,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 3;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; // base address
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; // scaled segment limit
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; // 4k granularity
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; // available for use by system
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 1;
RSP = RCX;
RIP = RDX;
}
else
#endif
{
parse_selector(((BX_CPU_THIS_PTR msr.sysenter_cs_msr + 16) & BX_SELECTOR_RPL_MASK) | 3,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 3;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; // base address
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; // scaled segment limit
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; // 4k granularity
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; // available for use by system
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 1;
#if BX_SUPPORT_X86_64
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 0;
#endif
ESP = ECX;
EIP = EDX;
}
#if BX_SUPPORT_X86_64
handleCpuModeChange(); // mode change could happen only when in long_mode()
#else
updateFetchModeMask();
#endif
#if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK
handleAlignmentCheck(); // CPL was modified
#endif
parse_selector(((BX_CPU_THIS_PTR msr.sysenter_cs_msr + (i->os64L() ? 40:24)) & BX_SELECTOR_RPL_MASK) | 3,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 3;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.base = 0; // base address
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit_scaled = 0xFFFFFFFF; // scaled segment limit
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.g = 1; // 4k granularity
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.d_b = 1; // 32-bit mode
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.avl = 0; // available for use by system
#if BX_SUPPORT_X86_64
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.l = 0;
#endif
BX_INSTR_FAR_BRANCH(BX_CPU_ID, BX_INSTR_IS_SYSEXIT,
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, RIP);
#else
BX_INFO(("SYSEXIT: use --enable-sep to enable SYSENTER/SYSEXIT support"));
exception(BX_UD_EXCEPTION, 0, 0);
#endif
}
#if BX_SUPPORT_X86_64
void BX_CPP_AttrRegparmN(1) BX_CPU_C::SYSCALL(bxInstruction_c *i)
{
bx_address temp_RIP;
BX_DEBUG(("Execute SYSCALL instruction"));
if (!BX_CPU_THIS_PTR efer.get_SCE()) {
exception(BX_UD_EXCEPTION, 0, 0);
}
invalidate_prefetch_q();
if (long_mode())
{
RCX = RIP;
R11 = read_eflags() & ~(EFlagsRFMask);
if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64) {
temp_RIP = MSR_LSTAR;
}
else {
temp_RIP = MSR_CSTAR;
}
// set up CS segment, flat, 64-bit DPL=0
parse_selector((MSR_STAR >> 32) & BX_SELECTOR_RPL_MASK,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; /* base address */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; /* 4k granularity */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 1; /* 64-bit code */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; /* available for use by system */
handleCpuModeChange(); // mode change could only happen when in long_mode()
#if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK
BX_CPU_THIS_PTR alignment_check_mask = 0; // CPL=0
#endif
// set up SS segment, flat, 64-bit DPL=0
parse_selector(((MSR_STAR >> 32) + 8) & BX_SELECTOR_RPL_MASK,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.base = 0; /* base address */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.g = 1; /* 4k granularity */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.d_b = 1; /* 32 bit stack */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.l = 0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.avl = 0; /* available for use by system */
writeEFlags(read_eflags() & (~MSR_FMASK), EFlagsValidMask);
BX_CPU_THIS_PTR clear_RF();
RIP = temp_RIP;
}
else {
// legacy mode
ECX = EIP;
temp_RIP = MSR_STAR & 0xFFFFFFFF;
// set up CS segment, flat, 32-bit DPL=0
parse_selector((MSR_STAR >> 32) & BX_SELECTOR_RPL_MASK,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; /* base address */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; /* 4k granularity */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 0; /* 32-bit code */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; /* available for use by system */
updateFetchModeMask();
#if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK
BX_CPU_THIS_PTR alignment_check_mask = 0; // CPL=0
#endif
// set up SS segment, flat, 32-bit DPL=0
parse_selector(((MSR_STAR >> 32) + 8) & BX_SELECTOR_RPL_MASK,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.base = 0; /* base address */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.g = 1; /* 4k granularity */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.d_b = 1; /* 32 bit stack */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.l = 0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.avl = 0; /* available for use by system */
BX_CPU_THIS_PTR clear_VM();
BX_CPU_THIS_PTR clear_IF();
BX_CPU_THIS_PTR clear_RF();
RIP = temp_RIP;
}
BX_INSTR_FAR_BRANCH(BX_CPU_ID, BX_INSTR_IS_SYSCALL,
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, RIP);
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::SYSRET(bxInstruction_c *i)
{
bx_address temp_RIP;
BX_DEBUG(("Execute SYSRET instruction"));
if (!BX_CPU_THIS_PTR efer.get_SCE()) {
exception(BX_UD_EXCEPTION, 0, 0);
}
if(!protected_mode() || CPL != 0) {
BX_ERROR(("SYSRET: priveledge check failed, generate #GP(0)"));
exception(BX_GP_EXCEPTION, 0, 0);
}
#if BX_SUPPORT_X86_64
if (!IsCanonical(RCX)) {
BX_ERROR(("SYSRET: canonical failure for RCX (RIP)"));
exception(BX_GP_EXCEPTION, 0, 0);
}
#endif
invalidate_prefetch_q();
if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64)
{
if (i->os64L()) {
// Return to 64-bit mode, set up CS segment, flat, 64-bit DPL=3
parse_selector((((MSR_STAR >> 48) + 16) & BX_SELECTOR_RPL_MASK) | 3,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 3;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; /* base address */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; /* 4k granularity */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 0;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 1; /* 64-bit code */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; /* available for use by system */
temp_RIP = RCX;
}
else {
// Return to 32-bit compatibility mode, set up CS segment, flat, 32-bit DPL=3
parse_selector((MSR_STAR >> 48) | 3,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 3;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; /* base address */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; /* 4k granularity */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 0; /* 32-bit code */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; /* available for use by system */
temp_RIP = ECX;
}
handleCpuModeChange(); // mode change could only happen when in long64 mode
#if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK
handleAlignmentCheck(); // CPL was modified
#endif
// SS base, limit, attributes unchanged
parse_selector((Bit16u)((MSR_STAR >> 48) + 8),
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 3;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
writeEFlags((Bit32u) R11, EFlagsValidMask);
}
else { // (!64BIT_MODE)
// Return to 32-bit legacy mode, set up CS segment, flat, 32-bit DPL=3
parse_selector((MSR_STAR >> 48) | 3,
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 3;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; /* base address */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; /* 4k granularity */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 0; /* 32-bit code */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; /* available for use by system */
updateFetchModeMask();
#if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK
handleAlignmentCheck(); // CPL was modified
#endif
// SS base, limit, attributes unchanged
parse_selector((Bit16u)((MSR_STAR >> 48) + 8),
&BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector);
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = SegValidCache | SegAccessROK | SegAccessWOK;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 3;
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */
BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED;
BX_CPU_THIS_PTR assert_IF();
temp_RIP = ECX;
}
handleCpuModeChange();
RIP = temp_RIP;
BX_INSTR_FAR_BRANCH(BX_CPU_ID, BX_INSTR_IS_SYSRET,
BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, RIP);
}
void BX_CPP_AttrRegparmN(1) BX_CPU_C::SWAPGS(bxInstruction_c *i)
{
Bit64u temp_GS_base;
BX_ASSERT(protected_mode());
if(CPL != 0)
exception(BX_GP_EXCEPTION, 0, 0);
temp_GS_base = MSR_GSBASE;
MSR_GSBASE = MSR_KERNELGSBASE;
MSR_KERNELGSBASE = temp_GS_base;
}
#endif
#if BX_X86_DEBUGGER
bx_bool BX_CPU_C::hwbreakpoint_check(bx_address laddr)
{
laddr = LPFOf(laddr);
for (int i=0;i<4;i++) {
if (laddr == LPFOf(BX_CPU_THIS_PTR dr[i]))
return 1;
}
return 0;
}
void BX_CPU_C::hwbreakpoint_match(bx_address laddr, unsigned len, unsigned rw)
{
if (BX_CPU_THIS_PTR dr7 & 0x000000ff) {
// Only compare debug registers if any breakpoints are enabled
unsigned opa, opb, write = rw & 1;
opa = BX_HWDebugMemRW; // Read or Write always compares vs 11b
if (! write) // only compares vs 11b
opb = opa;
else // BX_WRITE or BX_RW; also compare vs 01b
opb = BX_HWDebugMemW;
Bit32u dr6_bits = hwdebug_compare(laddr, len, opa, opb);
if (dr6_bits) {
BX_CPU_THIS_PTR debug_trap |= dr6_bits;
BX_CPU_THIS_PTR async_event = 1;
}
}
}
Bit32u BX_CPU_C::hwdebug_compare(bx_address laddr_0, unsigned size,
unsigned opa, unsigned opb)
{
// Support x86 hardware debug facilities (DR0..DR7)
Bit32u dr7 = BX_CPU_THIS_PTR dr7;
static bx_address alignment_mask[4] =
// 00b=1 01b=2 10b=undef(8) 11b=4
{ 0x0, 0x1, 0x7, 0x3 };
bx_address laddr_n = laddr_0 + (size - 1);
Bit32u dr_op[4], dr_len[4];
bx_bool ibpoint_found_n[4], ibpoint_found = 0;
dr_len[0] = (dr7>>18) & 3;
dr_len[1] = (dr7>>22) & 3;
dr_len[2] = (dr7>>26) & 3;
dr_len[3] = (dr7>>30) & 3;
dr_op[0] = (dr7>>16) & 3;
dr_op[1] = (dr7>>20) & 3;
dr_op[2] = (dr7>>24) & 3;
dr_op[3] = (dr7>>28) & 3;
for (unsigned n=0;n<4;n++) {
bx_address dr_start = BX_CPU_THIS_PTR dr[n] & ~alignment_mask[dr_len[n]];
bx_address dr_end = dr_start + alignment_mask[dr_len[n]];
ibpoint_found_n[n] = 0;
// See if this instruction address matches any breakpoints
if (dr7 & (3 << n*2)) {
if ((dr_op[n]==opa || dr_op[n]==opb) &&
(laddr_0 <= dr_end) &&
(laddr_n >= dr_start)) {
ibpoint_found_n[n] = 1;
ibpoint_found = 1;
}
}
}
// If *any* enabled breakpoints matched, then we need to
// set status bits for *all* breakpoints, even disabled ones,
// as long as they meet the other breakpoint criteria.
// dr6_mask is the return value. These bits represent the bits
// to be OR'd into DR6 as a result of the debug event.
Bit32u dr6_mask = 0;
if (ibpoint_found) {
if (ibpoint_found_n[0]) dr6_mask |= 0x1;
if (ibpoint_found_n[1]) dr6_mask |= 0x2;
if (ibpoint_found_n[2]) dr6_mask |= 0x4;
if (ibpoint_found_n[3]) dr6_mask |= 0x8;
}
return dr6_mask;
}
void BX_CPU_C::iobreakpoint_match(unsigned port, unsigned len)
{
// Only compare debug registers if any breakpoints are enabled
if (BX_CPU_THIS_PTR cr4.get_DE() && (BX_CPU_THIS_PTR dr7 & 0x000000ff))
{
Bit32u dr6_bits = hwdebug_compare(port, len, BX_HWDebugIO, BX_HWDebugIO);
if (dr6_bits) {
BX_CPU_THIS_PTR debug_trap |= dr6_bits;
BX_CPU_THIS_PTR async_event = 1;
}
}
}
#endif
Reference in New Issue View Git Blame Copy Permalink