a7529c1e75
- Since we are using the virtual timer, so we have to read time_usec() from it, too (TODO: realtime mode is hardcoded, maybe add an option). - Voodoo1 and Voodoo2 have different timing register widths. - Fixed vertical retrace value returned by get_retrace(). - Prepared separate hvRetrace register (TODO: hRetrace).
3085 lines
93 KiB
C
3085 lines
93 KiB
C
/////////////////////////////////////////////////////////////////////////
|
|
// $Id$
|
|
/////////////////////////////////////////////////////////////////////////
|
|
/*
|
|
* Portion of this software comes with the following license
|
|
*/
|
|
|
|
/***************************************************************************
|
|
|
|
Copyright Aaron Giles
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are
|
|
met:
|
|
|
|
* Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in
|
|
the documentation and/or other materials provided with the
|
|
distribution.
|
|
* Neither the name 'MAME' nor the names of its contributors may be
|
|
used to endorse or promote products derived from this software
|
|
without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY AARON GILES ''AS IS'' AND ANY EXPRESS OR
|
|
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL AARON GILES BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
***************************************************************************/
|
|
|
|
Bit32u voodoo_last_msg = 255;
|
|
|
|
|
|
#define poly_wait(x,y)
|
|
#define cpu_eat_cycles(x,y)
|
|
|
|
#define DEBUG_DEPTH (0)
|
|
#define DEBUG_LOD (0)
|
|
|
|
#define LOG_VBLANK_SWAP (0)
|
|
#define LOG_FIFO (0)
|
|
#define LOG_FIFO_VERBOSE (0)
|
|
#define LOG_REGISTERS (0)
|
|
#define LOG_WAITS (0)
|
|
#define LOG_LFB (0)
|
|
#define LOG_TEXTURE_RAM (0)
|
|
#define LOG_RASTERIZERS (0)
|
|
#define LOG_CMDFIFO (0)
|
|
#define LOG_CMDFIFO_VERBOSE (0)
|
|
|
|
#define MODIFY_PIXEL(VV)
|
|
|
|
/* fast dither lookup */
|
|
static Bit8u dither4_lookup[256*16*2];
|
|
static Bit8u dither2_lookup[256*16*2];
|
|
|
|
/* fast reciprocal+log2 lookup */
|
|
Bit32u voodoo_reciplog[(2 << RECIPLOG_LOOKUP_BITS) + 2];
|
|
|
|
|
|
/***************************************************************************
|
|
RASTERIZER MANAGEMENT
|
|
***************************************************************************/
|
|
|
|
/*-------------------------------------------------
|
|
generic_0tmu - generic rasterizer for 0 TMUs
|
|
-------------------------------------------------*/
|
|
|
|
RASTERIZER(generic_0tmu, 0, v->reg[fbzColorPath].u, v->reg[fbzMode].u, v->reg[alphaMode].u,
|
|
v->reg[fogMode].u, 0, 0)
|
|
|
|
|
|
/*-------------------------------------------------
|
|
generic_1tmu - generic rasterizer for 1 TMU
|
|
-------------------------------------------------*/
|
|
|
|
RASTERIZER(generic_1tmu, 1, v->reg[fbzColorPath].u, v->reg[fbzMode].u, v->reg[alphaMode].u,
|
|
v->reg[fogMode].u, v->tmu[0].reg[textureMode].u, 0)
|
|
|
|
|
|
/*-------------------------------------------------
|
|
generic_2tmu - generic rasterizer for 2 TMUs
|
|
-------------------------------------------------*/
|
|
|
|
RASTERIZER(generic_2tmu, 2, v->reg[fbzColorPath].u, v->reg[fbzMode].u, v->reg[alphaMode].u,
|
|
v->reg[fogMode].u, v->tmu[0].reg[textureMode].u, v->tmu[1].reg[textureMode].u)
|
|
|
|
|
|
/*************************************
|
|
*
|
|
* Specific rasterizers
|
|
*
|
|
*************************************/
|
|
|
|
#define RASTERIZER_ENTRY(fbzcp, alpha, fog, fbz, tex0, tex1) \
|
|
RASTERIZER(fbzcp##_##alpha##_##fog##_##fbz##_##tex0##_##tex1, (((tex0) == 0xffffffff) ? 0 : ((tex1) == 0xffffffff) ? 1 : 2), fbzcp, fbz, alpha, fog, tex0, tex1)
|
|
|
|
#include "voodoo_raster.h"
|
|
|
|
#undef RASTERIZER_ENTRY
|
|
|
|
|
|
|
|
/*************************************
|
|
*
|
|
* Rasterizer table
|
|
*
|
|
*************************************/
|
|
|
|
#define RASTERIZER_ENTRY(fbzcp, alpha, fog, fbz, tex0, tex1) \
|
|
{ NULL, raster_##fbzcp##_##alpha##_##fog##_##fbz##_##tex0##_##tex1, FALSE, 0, 0, 0, fbzcp, alpha, fog, fbz, tex0, tex1 },
|
|
|
|
static const raster_info predef_raster_table[] =
|
|
{
|
|
#include "voodoo_raster.h"
|
|
{ 0 }
|
|
};
|
|
|
|
#undef RASTERIZER_ENTRY
|
|
|
|
|
|
|
|
/***************************************************************************
|
|
RASTERIZER MANAGEMENT
|
|
***************************************************************************/
|
|
|
|
/*-------------------------------------------------
|
|
add_rasterizer - add a rasterizer to our
|
|
hash table
|
|
-------------------------------------------------*/
|
|
|
|
static raster_info *add_rasterizer(voodoo_state *v, const raster_info *cinfo)
|
|
{
|
|
raster_info *info = &v->rasterizer[v->next_rasterizer++];
|
|
int hash = compute_raster_hash(cinfo);
|
|
|
|
if (v->next_rasterizer > MAX_RASTERIZERS)
|
|
BX_PANIC(("Out of space for new rasterizers!"));
|
|
|
|
/* make a copy of the info */
|
|
*info = *cinfo;
|
|
|
|
/* fill in the data */
|
|
info->hits = 0;
|
|
info->polys = 0;
|
|
|
|
/* hook us into the hash table */
|
|
info->next = v->raster_hash[hash];
|
|
v->raster_hash[hash] = info;
|
|
|
|
if (LOG_RASTERIZERS) {
|
|
printf("Adding rasterizer @ %p : %08X %08X %08X %08X %08X %08X (hash=%d)\n",
|
|
info->callback,
|
|
info->eff_color_path, info->eff_alpha_mode, info->eff_fog_mode, info->eff_fbz_mode,
|
|
info->eff_tex_mode_0, info->eff_tex_mode_1, hash);
|
|
|
|
printf("RASTERIZER_ENTRY( 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X)\n",
|
|
info->eff_color_path,
|
|
info->eff_alpha_mode,
|
|
info->eff_fog_mode,
|
|
info->eff_fbz_mode,
|
|
info->eff_tex_mode_0,
|
|
info->eff_tex_mode_1,
|
|
info->is_generic ? '*' : ' ',
|
|
info->polys,
|
|
info->hits);
|
|
}
|
|
return info;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------
|
|
find_rasterizer - find a rasterizer that
|
|
matches our current parameters and return
|
|
it, creating a new one if necessary
|
|
-------------------------------------------------*/
|
|
|
|
static raster_info *find_rasterizer(voodoo_state *v, int texcount)
|
|
{
|
|
raster_info *info, *prev = NULL;
|
|
raster_info curinfo;
|
|
int hash;
|
|
|
|
/* build an info struct with all the parameters */
|
|
curinfo.eff_color_path = normalize_color_path(v->reg[fbzColorPath].u);
|
|
curinfo.eff_alpha_mode = normalize_alpha_mode(v->reg[alphaMode].u);
|
|
curinfo.eff_fog_mode = normalize_fog_mode(v->reg[fogMode].u);
|
|
curinfo.eff_fbz_mode = normalize_fbz_mode(v->reg[fbzMode].u);
|
|
curinfo.eff_tex_mode_0 = (texcount >= 1) ? normalize_tex_mode(v->tmu[0].reg[textureMode].u) : 0xffffffff;
|
|
curinfo.eff_tex_mode_1 = (texcount >= 2) ? normalize_tex_mode(v->tmu[1].reg[textureMode].u) : 0xffffffff;
|
|
|
|
/* compute the hash */
|
|
hash = compute_raster_hash(&curinfo);
|
|
|
|
/* find the appropriate hash entry */
|
|
for (info = v->raster_hash[hash]; info; prev = info, info = info->next)
|
|
if (info->eff_color_path == curinfo.eff_color_path &&
|
|
info->eff_alpha_mode == curinfo.eff_alpha_mode &&
|
|
info->eff_fog_mode == curinfo.eff_fog_mode &&
|
|
info->eff_fbz_mode == curinfo.eff_fbz_mode &&
|
|
info->eff_tex_mode_0 == curinfo.eff_tex_mode_0 &&
|
|
info->eff_tex_mode_1 == curinfo.eff_tex_mode_1)
|
|
{
|
|
/* got it, move us to the head of the list */
|
|
if (prev)
|
|
{
|
|
prev->next = info->next;
|
|
info->next = v->raster_hash[hash];
|
|
v->raster_hash[hash] = info;
|
|
}
|
|
|
|
/* return the result */
|
|
return info;
|
|
}
|
|
|
|
/* generate a new one using the generic entry */
|
|
curinfo.callback = (texcount == 0) ? raster_generic_0tmu : (texcount == 1) ? raster_generic_1tmu : raster_generic_2tmu;
|
|
curinfo.is_generic = TRUE;
|
|
curinfo.display = 0;
|
|
curinfo.polys = 0;
|
|
curinfo.hits = 0;
|
|
curinfo.next = 0;
|
|
|
|
return add_rasterizer(v, &curinfo);
|
|
}
|
|
|
|
/*************************************
|
|
*
|
|
* NCC table management
|
|
*
|
|
*************************************/
|
|
|
|
void ncc_table_write(ncc_table *n, offs_t regnum, Bit32u data)
|
|
{
|
|
/* I/Q entries reference the plaette if the high bit is set */
|
|
if (regnum >= 4 && (data & 0x80000000) && n->palette)
|
|
{
|
|
int index = ((data >> 23) & 0xfe) | (regnum & 1);
|
|
|
|
/* set the ARGB for this palette index */
|
|
n->palette[index] = 0xff000000 | data;
|
|
|
|
/* if we have an ARGB palette as well, compute its value */
|
|
if (n->palettea)
|
|
{
|
|
int a = ((data >> 16) & 0xfc) | ((data >> 22) & 0x03);
|
|
int r = ((data >> 10) & 0xfc) | ((data >> 16) & 0x03);
|
|
int g = ((data >> 4) & 0xfc) | ((data >> 10) & 0x03);
|
|
int b = ((data << 2) & 0xfc) | ((data >> 4) & 0x03);
|
|
n->palettea[index] = MAKE_ARGB(a, r, g, b);
|
|
}
|
|
|
|
/* this doesn't dirty the table or go to the registers, so bail */
|
|
return;
|
|
}
|
|
|
|
/* if the register matches, don't update */
|
|
if (data == n->reg[regnum].u)
|
|
return;
|
|
n->reg[regnum].u = data;
|
|
|
|
/* first four entries are packed Y values */
|
|
if (regnum < 4)
|
|
{
|
|
regnum *= 4;
|
|
n->y[regnum+0] = (data >> 0) & 0xff;
|
|
n->y[regnum+1] = (data >> 8) & 0xff;
|
|
n->y[regnum+2] = (data >> 16) & 0xff;
|
|
n->y[regnum+3] = (data >> 24) & 0xff;
|
|
}
|
|
|
|
/* the second four entries are the I RGB values */
|
|
else if (regnum < 8)
|
|
{
|
|
regnum &= 3;
|
|
n->ir[regnum] = (Bit32s)(data << 5) >> 23;
|
|
n->ig[regnum] = (Bit32s)(data << 14) >> 23;
|
|
n->ib[regnum] = (Bit32s)(data << 23) >> 23;
|
|
}
|
|
|
|
/* the final four entries are the Q RGB values */
|
|
else
|
|
{
|
|
regnum &= 3;
|
|
n->qr[regnum] = (Bit32s)(data << 5) >> 23;
|
|
n->qg[regnum] = (Bit32s)(data << 14) >> 23;
|
|
n->qb[regnum] = (Bit32s)(data << 23) >> 23;
|
|
}
|
|
|
|
/* mark the table dirty */
|
|
n->dirty = 1;
|
|
}
|
|
|
|
|
|
void ncc_table_update(ncc_table *n)
|
|
{
|
|
int r, g, b, i;
|
|
|
|
/* generte all 256 possibilities */
|
|
for (i = 0; i < 256; i++)
|
|
{
|
|
int vi = (i >> 2) & 0x03;
|
|
int vq = (i >> 0) & 0x03;
|
|
|
|
/* start with the intensity */
|
|
r = g = b = n->y[(i >> 4) & 0x0f];
|
|
|
|
/* add the coloring */
|
|
r += n->ir[vi] + n->qr[vq];
|
|
g += n->ig[vi] + n->qg[vq];
|
|
b += n->ib[vi] + n->qb[vq];
|
|
|
|
/* clamp */
|
|
CLAMP(r, 0, 255);
|
|
CLAMP(g, 0, 255);
|
|
CLAMP(b, 0, 255);
|
|
|
|
/* fill in the table */
|
|
n->texel[i] = MAKE_ARGB(0xff, r, g, b);
|
|
}
|
|
|
|
/* no longer dirty */
|
|
n->dirty = 0;
|
|
}
|
|
|
|
void recompute_texture_params(tmu_state *t)
|
|
{
|
|
int bppscale;
|
|
Bit32u base;
|
|
int lod;
|
|
|
|
/* extract LOD parameters */
|
|
t->lodmin = TEXLOD_LODMIN(t->reg[tLOD].u) << 6;
|
|
t->lodmax = TEXLOD_LODMAX(t->reg[tLOD].u) << 6;
|
|
t->lodbias = (Bit8s)(TEXLOD_LODBIAS(t->reg[tLOD].u) << 2) << 4;
|
|
|
|
/* determine which LODs are present */
|
|
t->lodmask = 0x1ff;
|
|
if (TEXLOD_LOD_TSPLIT(t->reg[tLOD].u))
|
|
{
|
|
if (!TEXLOD_LOD_ODD(t->reg[tLOD].u))
|
|
t->lodmask = 0x155;
|
|
else
|
|
t->lodmask = 0x0aa;
|
|
}
|
|
|
|
/* determine base texture width/height */
|
|
t->wmask = t->hmask = 0xff;
|
|
if (TEXLOD_LOD_S_IS_WIDER(t->reg[tLOD].u))
|
|
t->hmask >>= TEXLOD_LOD_ASPECT(t->reg[tLOD].u);
|
|
else
|
|
t->wmask >>= TEXLOD_LOD_ASPECT(t->reg[tLOD].u);
|
|
|
|
/* determine the bpp of the texture */
|
|
bppscale = TEXMODE_FORMAT(t->reg[textureMode].u) >> 3;
|
|
|
|
/* start with the base of LOD 0 */
|
|
if (t->texaddr_shift == 0 && (t->reg[texBaseAddr].u & 1))
|
|
BX_DEBUG(("Tiled texture"));
|
|
base = (t->reg[texBaseAddr].u & t->texaddr_mask) << t->texaddr_shift;
|
|
t->lodoffset[0] = base & t->mask;
|
|
|
|
/* LODs 1-3 are different depending on whether we are in multitex mode */
|
|
/* Several Voodoo 2 games leave the upper bits of TLOD == 0xff, meaning we think */
|
|
/* they want multitex mode when they really don't -- disable for now */
|
|
if (0)//TEXLOD_TMULTIBASEADDR(t->reg[tLOD].u))
|
|
{
|
|
base = (t->reg[texBaseAddr_1].u & t->texaddr_mask) << t->texaddr_shift;
|
|
t->lodoffset[1] = base & t->mask;
|
|
base = (t->reg[texBaseAddr_2].u & t->texaddr_mask) << t->texaddr_shift;
|
|
t->lodoffset[2] = base & t->mask;
|
|
base = (t->reg[texBaseAddr_3_8].u & t->texaddr_mask) << t->texaddr_shift;
|
|
t->lodoffset[3] = base & t->mask;
|
|
}
|
|
else
|
|
{
|
|
if (t->lodmask & (1 << 0))
|
|
base += (((t->wmask >> 0) + 1) * ((t->hmask >> 0) + 1)) << bppscale;
|
|
t->lodoffset[1] = base & t->mask;
|
|
if (t->lodmask & (1 << 1))
|
|
base += (((t->wmask >> 1) + 1) * ((t->hmask >> 1) + 1)) << bppscale;
|
|
t->lodoffset[2] = base & t->mask;
|
|
if (t->lodmask & (1 << 2))
|
|
base += (((t->wmask >> 2) + 1) * ((t->hmask >> 2) + 1)) << bppscale;
|
|
t->lodoffset[3] = base & t->mask;
|
|
}
|
|
|
|
/* remaining LODs make sense */
|
|
for (lod = 4; lod <= 8; lod++)
|
|
{
|
|
if (t->lodmask & (1 << (lod - 1)))
|
|
{
|
|
Bit32u size = ((t->wmask >> (lod - 1)) + 1) * ((t->hmask >> (lod - 1)) + 1);
|
|
if (size < 4) size = 4;
|
|
base += size << bppscale;
|
|
}
|
|
t->lodoffset[lod] = base & t->mask;
|
|
}
|
|
|
|
/* set the NCC lookup appropriately */
|
|
t->texel[1] = t->texel[9] = t->ncc[TEXMODE_NCC_TABLE_SELECT(t->reg[textureMode].u)].texel;
|
|
|
|
/* pick the lookup table */
|
|
t->lookup = t->texel[TEXMODE_FORMAT(t->reg[textureMode].u)];
|
|
|
|
/* compute the detail parameters */
|
|
t->detailmax = TEXDETAIL_DETAIL_MAX(t->reg[tDetail].u);
|
|
t->detailbias = (Bit8s)(TEXDETAIL_DETAIL_BIAS(t->reg[tDetail].u) << 2) << 6;
|
|
t->detailscale = TEXDETAIL_DETAIL_SCALE(t->reg[tDetail].u);
|
|
|
|
/* no longer dirty */
|
|
t->regdirty = 0;
|
|
|
|
/* check for separate RGBA filtering */
|
|
if (TEXDETAIL_SEPARATE_RGBA_FILTER(t->reg[tDetail].u))
|
|
BX_PANIC(("Separate RGBA filters!"));
|
|
}
|
|
|
|
BX_CPP_INLINE Bit32s prepare_tmu(tmu_state *t)
|
|
{
|
|
Bit64s texdx, texdy;
|
|
Bit32s lodbase;
|
|
|
|
/* if the texture parameters are dirty, update them */
|
|
if (t->regdirty) {
|
|
recompute_texture_params(t);
|
|
|
|
/* ensure that the NCC tables are up to date */
|
|
if ((TEXMODE_FORMAT(t->reg[textureMode].u) & 7) == 1)
|
|
{
|
|
ncc_table *n = &t->ncc[TEXMODE_NCC_TABLE_SELECT(t->reg[textureMode].u)];
|
|
t->texel[1] = t->texel[9] = n->texel;
|
|
if (n->dirty)
|
|
ncc_table_update(n);
|
|
}
|
|
}
|
|
|
|
/* compute (ds^2 + dt^2) in both X and Y as 28.36 numbers */
|
|
texdx = (Bit64s)(t->dsdx >> 14) * (Bit64s)(t->dsdx >> 14) + (Bit64s)(t->dtdx >> 14) * (Bit64s)(t->dtdx >> 14);
|
|
texdy = (Bit64s)(t->dsdy >> 14) * (Bit64s)(t->dsdy >> 14) + (Bit64s)(t->dtdy >> 14) * (Bit64s)(t->dtdy >> 14);
|
|
|
|
/* pick whichever is larger and shift off some high bits -> 28.20 */
|
|
if (texdx < texdy)
|
|
texdx = texdy;
|
|
texdx >>= 16;
|
|
|
|
/* use our fast reciprocal/log on this value; it expects input as a */
|
|
/* 16.32 number, and returns the log of the reciprocal, so we have to */
|
|
/* adjust the result: negative to get the log of the original value */
|
|
/* plus 12 to account for the extra exponent, and divided by 2 to */
|
|
/* get the log of the square root of texdx */
|
|
(void)fast_reciplog(texdx, &lodbase);
|
|
return (-lodbase + (12 << 8)) / 2;
|
|
}
|
|
|
|
|
|
BX_CPP_INLINE Bit32s round_coordinate(float value)
|
|
{
|
|
Bit32s result = (Bit32s)floor(value);
|
|
return result + (value - (float)result > 0.5f);
|
|
}
|
|
|
|
Bit32u poly_render_triangle(void *dest, const rectangle *cliprect, poly_draw_scanline_func callback, int paramcount, const poly_vertex *v1, const poly_vertex *v2, const poly_vertex *v3, poly_extra_data *extra)
|
|
{
|
|
float dxdy_v1v2, dxdy_v1v3, dxdy_v2v3;
|
|
const poly_vertex *tv;
|
|
Bit32s curscan, scaninc=1;
|
|
|
|
Bit32s v1yclip, v3yclip;
|
|
Bit32s v1y, v3y /*, v1x */;
|
|
Bit32s pixels = 0;
|
|
// Bit32u startunit;
|
|
|
|
/* first sort by Y */
|
|
if (v2->y < v1->y)
|
|
{
|
|
tv = v1;
|
|
v1 = v2;
|
|
v2 = tv;
|
|
}
|
|
if (v3->y < v2->y)
|
|
{
|
|
tv = v2;
|
|
v2 = v3;
|
|
v3 = tv;
|
|
if (v2->y < v1->y)
|
|
{
|
|
tv = v1;
|
|
v1 = v2;
|
|
v2 = tv;
|
|
}
|
|
}
|
|
|
|
/* compute some integral X/Y vertex values */
|
|
// v1x = round_coordinate(v1->x);
|
|
v1y = round_coordinate(v1->y);
|
|
v3y = round_coordinate(v3->y);
|
|
|
|
/* clip coordinates */
|
|
v1yclip = v1y;
|
|
v3yclip = v3y;// + ((poly->flags & POLYFLAG_INCLUDE_BOTTOM_EDGE) ? 1 : 0);
|
|
if (cliprect != NULL)
|
|
{
|
|
v1yclip = MAX(v1yclip, cliprect->min_y);
|
|
v3yclip = MIN(v3yclip, cliprect->max_y + 1);
|
|
}
|
|
if (v3yclip - v1yclip <= 0)
|
|
return 0;
|
|
|
|
/* allocate a new polygon */
|
|
// polygon = allocate_polygon(poly, v1yclip, v3yclip);
|
|
|
|
/* fill in the polygon information */
|
|
//polygon->poly = poly;
|
|
//polygon->dest = dest;
|
|
//polygon->callback = callback;
|
|
//polygon->extra = poly->extra[poly->extra_next - 1];
|
|
//polygon->numparams = paramcount;
|
|
//polygon->numverts = 3;
|
|
|
|
/* set the start X/Y coordinates */
|
|
//polygon->xorigin = v1x;
|
|
//polygon->yorigin = v1y;
|
|
|
|
/* compute the slopes for each portion of the triangle */
|
|
dxdy_v1v2 = (v2->y == v1->y) ? 0.0f : (v2->x - v1->x) / (v2->y - v1->y);
|
|
dxdy_v1v3 = (v3->y == v1->y) ? 0.0f : (v3->x - v1->x) / (v3->y - v1->y);
|
|
dxdy_v2v3 = (v3->y == v2->y) ? 0.0f : (v3->x - v2->x) / (v3->y - v2->y);
|
|
|
|
/* compute the X extents for each scanline */
|
|
// startunit = poly->unit_next;
|
|
|
|
// tri_work_unit *unit = new tri_work_unit;
|
|
poly_extent extent;
|
|
int extnum=0;
|
|
for (curscan = v1yclip; curscan < v3yclip; curscan += scaninc)
|
|
{
|
|
// Bit32u bucketnum = ((Bit32u)curscan / SCANLINES_PER_BUCKET) % TOTAL_BUCKETS;
|
|
// Bit32u unit_index = poly->unit_next++;
|
|
// tri_work_unit *unit = &poly->unit[unit_index]->tri;
|
|
|
|
|
|
/* determine how much to advance to hit the next bucket */
|
|
// scaninc = SCANLINES_PER_BUCKET - (Bit32u)curscan % SCANLINES_PER_BUCKET;
|
|
|
|
/* fill in the work unit basics */
|
|
// unit->shared.polygon = polygon;
|
|
// unit->shared.count_next = MIN(v3yclip - curscan, scaninc);
|
|
// unit->shared.scanline = curscan;
|
|
// unit->shared.previtem = poly->unit_bucket[bucketnum];
|
|
// poly->unit_bucket[bucketnum] = unit_index;
|
|
|
|
/* iterate over extents */
|
|
// for (extnum = 0; extnum < unit->shared.count_next; extnum++)
|
|
{
|
|
float fully = (float)(curscan + extnum) + 0.5f;
|
|
float startx = v1->x + (fully - v1->y) * dxdy_v1v3;
|
|
float stopx;
|
|
Bit32s istartx, istopx;
|
|
|
|
/* compute the ending X based on which part of the triangle we're in */
|
|
if (fully < v2->y)
|
|
stopx = v1->x + (fully - v1->y) * dxdy_v1v2;
|
|
else
|
|
stopx = v2->x + (fully - v2->y) * dxdy_v2v3;
|
|
|
|
/* clamp to full pixels */
|
|
istartx = round_coordinate(startx);
|
|
istopx = round_coordinate(stopx);
|
|
|
|
/* force start < stop */
|
|
if (istartx > istopx)
|
|
{
|
|
Bit32s temp = istartx;
|
|
istartx = istopx;
|
|
istopx = temp;
|
|
}
|
|
|
|
/* include the right edge if requested */
|
|
// if (poly->flags & POLYFLAG_INCLUDE_RIGHT_EDGE)
|
|
// istopx++;
|
|
|
|
/* apply left/right clipping */
|
|
if (cliprect != NULL)
|
|
{
|
|
if (istartx < cliprect->min_x)
|
|
istartx = cliprect->min_x;
|
|
if (istopx > cliprect->max_x)
|
|
istopx = cliprect->max_x + 1;
|
|
}
|
|
|
|
/* set the extent and update the total pixel count */
|
|
if (istartx >= istopx)
|
|
istartx = istopx = 0;
|
|
// unit->extent[extnum].startx = istartx;
|
|
// unit->extent[extnum].stopx = istopx;
|
|
extent.startx = istartx;
|
|
extent.stopx = istopx;
|
|
(callback)(dest,curscan,&extent,extra,0);
|
|
|
|
pixels += istopx - istartx;
|
|
}
|
|
}
|
|
|
|
// delete unit;
|
|
|
|
/* return the total number of pixels in the triangle */
|
|
// poly->triangles++;
|
|
// poly->pixels += pixels;
|
|
return pixels;
|
|
}
|
|
|
|
Bit32s triangle_create_work_item(/*voodoo_state *v,*/ Bit16u *drawbuf, int texcount)
|
|
{
|
|
poly_extra_data extra;// = (poly_extra_data *)poly_get_extra_data(v->poly);
|
|
// raster_info *info = new raster_info;
|
|
// info=find_rasterizer(v, info, texcount);
|
|
raster_info *info = find_rasterizer(v, texcount);
|
|
poly_vertex vert[3];
|
|
Bit32u retval;
|
|
|
|
/* fill in the vertex data */
|
|
vert[0].x = (float)v->fbi.ax * (1.0f / 16.0f);
|
|
vert[0].y = (float)v->fbi.ay * (1.0f / 16.0f);
|
|
vert[1].x = (float)v->fbi.bx * (1.0f / 16.0f);
|
|
vert[1].y = (float)v->fbi.by * (1.0f / 16.0f);
|
|
vert[2].x = (float)v->fbi.cx * (1.0f / 16.0f);
|
|
vert[2].y = (float)v->fbi.cy * (1.0f / 16.0f);
|
|
|
|
/* fill in the extra data */
|
|
extra.state = v;
|
|
extra.info = info;
|
|
|
|
/* fill in triangle parameters */
|
|
extra.ax = v->fbi.ax;
|
|
extra.ay = v->fbi.ay;
|
|
extra.startr = v->fbi.startr;
|
|
extra.startg = v->fbi.startg;
|
|
extra.startb = v->fbi.startb;
|
|
extra.starta = v->fbi.starta;
|
|
extra.startz = v->fbi.startz;
|
|
extra.startw = v->fbi.startw;
|
|
extra.drdx = v->fbi.drdx;
|
|
extra.dgdx = v->fbi.dgdx;
|
|
extra.dbdx = v->fbi.dbdx;
|
|
extra.dadx = v->fbi.dadx;
|
|
extra.dzdx = v->fbi.dzdx;
|
|
extra.dwdx = v->fbi.dwdx;
|
|
extra.drdy = v->fbi.drdy;
|
|
extra.dgdy = v->fbi.dgdy;
|
|
extra.dbdy = v->fbi.dbdy;
|
|
extra.dady = v->fbi.dady;
|
|
extra.dzdy = v->fbi.dzdy;
|
|
extra.dwdy = v->fbi.dwdy;
|
|
|
|
/* fill in texture 0 parameters */
|
|
if (texcount > 0)
|
|
{
|
|
extra.starts0 = v->tmu[0].starts;
|
|
extra.startt0 = v->tmu[0].startt;
|
|
extra.startw0 = v->tmu[0].startw;
|
|
extra.ds0dx = v->tmu[0].dsdx;
|
|
extra.dt0dx = v->tmu[0].dtdx;
|
|
extra.dw0dx = v->tmu[0].dwdx;
|
|
extra.ds0dy = v->tmu[0].dsdy;
|
|
extra.dt0dy = v->tmu[0].dtdy;
|
|
extra.dw0dy = v->tmu[0].dwdy;
|
|
extra.lodbase0 = prepare_tmu(&v->tmu[0]);
|
|
v->stats.texture_mode[TEXMODE_FORMAT(v->tmu[0].reg[textureMode].u)]++;
|
|
|
|
/* fill in texture 1 parameters */
|
|
if (texcount > 1)
|
|
{
|
|
extra.starts1 = v->tmu[1].starts;
|
|
extra.startt1 = v->tmu[1].startt;
|
|
extra.startw1 = v->tmu[1].startw;
|
|
extra.ds1dx = v->tmu[1].dsdx;
|
|
extra.dt1dx = v->tmu[1].dtdx;
|
|
extra.dw1dx = v->tmu[1].dwdx;
|
|
extra.ds1dy = v->tmu[1].dsdy;
|
|
extra.dt1dy = v->tmu[1].dtdy;
|
|
extra.dw1dy = v->tmu[1].dwdy;
|
|
extra.lodbase1 = prepare_tmu(&v->tmu[1]);
|
|
v->stats.texture_mode[TEXMODE_FORMAT(v->tmu[1].reg[textureMode].u)]++;
|
|
}
|
|
}
|
|
|
|
/* farm the rasterization out to other threads */
|
|
info->polys++;
|
|
retval = poly_render_triangle(drawbuf, NULL, info->callback, 0, &vert[0], &vert[1], &vert[2], &extra);
|
|
|
|
// delete info;
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
void draw_line (int x1, int y1, int x2, int y2, Bit16u *buf)
|
|
{
|
|
int i, deltax, deltay, numpixels,
|
|
d, dinc1, dinc2,
|
|
x, xinc1, xinc2,
|
|
y, yinc1, yinc2;
|
|
Bit16u color = 0xffff;
|
|
int XRes = v->fbi.rowpixels;
|
|
int YRes = v->fbi.height;
|
|
Bit16u *dest;
|
|
dest = buf;
|
|
|
|
deltax = abs(x2 - x1);
|
|
deltay = abs(y2 - y1);
|
|
|
|
if (deltax >= deltay)
|
|
{
|
|
numpixels = deltax + 1;
|
|
d = (deltay<<1) - deltax;
|
|
dinc1 = deltay<<1;
|
|
dinc2 = (deltay - deltax) << 1;
|
|
xinc1 = 1;
|
|
xinc2 = 1;
|
|
yinc1 = 0;
|
|
yinc2 = 1;
|
|
}
|
|
else
|
|
{
|
|
numpixels = deltay + 1;
|
|
d = (deltax<<1) - deltay;
|
|
dinc1 = deltax << 1;
|
|
dinc2 = (deltax - deltay) << 1;
|
|
xinc1 = 0;
|
|
xinc2 = 1;
|
|
yinc1 = 1;
|
|
yinc2 = 1;
|
|
}
|
|
|
|
if (x1 > x2)
|
|
{
|
|
xinc1 = - xinc1;
|
|
xinc2 = - xinc2;
|
|
}
|
|
if (y1 > y2)
|
|
{
|
|
yinc1 = - yinc1;
|
|
yinc2 = - yinc2;
|
|
}
|
|
|
|
x = x1;
|
|
y = y1;
|
|
|
|
for (i=0; i < numpixels; i++)
|
|
{
|
|
if ((x>=0) && (x<XRes) && (y>=0) && (y<YRes))
|
|
dest [x + y*XRes] = color;
|
|
|
|
if (d < 0)
|
|
{
|
|
d = d + dinc1;
|
|
x = x + xinc1;
|
|
y = y + yinc1;
|
|
}
|
|
else
|
|
{
|
|
d = d + dinc2;
|
|
x = x + xinc2;
|
|
y = y + yinc2;
|
|
}
|
|
}
|
|
}
|
|
|
|
Bit32s triangle(voodoo_state *v)
|
|
{
|
|
int texcount = 0;
|
|
Bit16u *drawbuf;
|
|
int destbuf;
|
|
int pixels;
|
|
|
|
// profiler_mark_start(PROFILER_USER2);
|
|
|
|
/* determine the number of TMUs involved */
|
|
texcount = 0;
|
|
if (!FBIINIT3_DISABLE_TMUS(v->reg[fbiInit3].u) && FBZCP_TEXTURE_ENABLE(v->reg[fbzColorPath].u))
|
|
{
|
|
texcount = 1;
|
|
if (v->chipmask & 0x04)
|
|
texcount = 2;
|
|
}
|
|
|
|
/* perform subpixel adjustments */
|
|
if (FBZCP_CCA_SUBPIXEL_ADJUST(v->reg[fbzColorPath].u))
|
|
{
|
|
Bit32s dx = 8 - (v->fbi.ax & 15);
|
|
Bit32s dy = 8 - (v->fbi.ay & 15);
|
|
|
|
/* adjust iterated R,G,B,A and W/Z */
|
|
v->fbi.startr += (dy * v->fbi.drdy + dx * v->fbi.drdx) >> 4;
|
|
v->fbi.startg += (dy * v->fbi.dgdy + dx * v->fbi.dgdx) >> 4;
|
|
v->fbi.startb += (dy * v->fbi.dbdy + dx * v->fbi.dbdx) >> 4;
|
|
v->fbi.starta += (dy * v->fbi.dady + dx * v->fbi.dadx) >> 4;
|
|
v->fbi.startw += (dy * v->fbi.dwdy + dx * v->fbi.dwdx) >> 4;
|
|
v->fbi.startz += mul_32x32_shift(dy, v->fbi.dzdy, 4) + mul_32x32_shift(dx, v->fbi.dzdx, 4);
|
|
|
|
/* adjust iterated W/S/T for TMU 0 */
|
|
if (texcount >= 1)
|
|
{
|
|
v->tmu[0].startw += (dy * v->tmu[0].dwdy + dx * v->tmu[0].dwdx) >> 4;
|
|
v->tmu[0].starts += (dy * v->tmu[0].dsdy + dx * v->tmu[0].dsdx) >> 4;
|
|
v->tmu[0].startt += (dy * v->tmu[0].dtdy + dx * v->tmu[0].dtdx) >> 4;
|
|
|
|
/* adjust iterated W/S/T for TMU 1 */
|
|
if (texcount >= 2)
|
|
{
|
|
v->tmu[1].startw += (dy * v->tmu[1].dwdy + dx * v->tmu[1].dwdx) >> 4;
|
|
v->tmu[1].starts += (dy * v->tmu[1].dsdy + dx * v->tmu[1].dsdx) >> 4;
|
|
v->tmu[1].startt += (dy * v->tmu[1].dtdy + dx * v->tmu[1].dtdx) >> 4;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* wait for any outstanding work to finish */
|
|
// poly_wait(v->poly, "triangle");
|
|
|
|
/* determine the draw buffer */
|
|
destbuf = (v->type >= VOODOO_BANSHEE) ? 1 : FBZMODE_DRAW_BUFFER(v->reg[fbzMode].u);
|
|
switch (destbuf)
|
|
{
|
|
case 0: /* front buffer */
|
|
drawbuf = (Bit16u *)(v->fbi.ram + v->fbi.rgboffs[v->fbi.frontbuf]);
|
|
v->fbi.video_changed = 1;
|
|
break;
|
|
|
|
case 1: /* back buffer */
|
|
drawbuf = (Bit16u *)(v->fbi.ram + v->fbi.rgboffs[v->fbi.backbuf]);
|
|
break;
|
|
|
|
default: /* reserved */
|
|
return TRIANGLE_SETUP_CLOCKS;
|
|
}
|
|
|
|
// draw_line(v->fbi.ax/16,v->fbi.ay/16,v->fbi.bx/16,v->fbi.by/16,drawbuf);
|
|
// draw_line(v->fbi.ax/16,v->fbi.ay/16,v->fbi.cx/16,v->fbi.cy/16,drawbuf);
|
|
// draw_line(v->fbi.cx/16,v->fbi.cy/16,v->fbi.bx/16,v->fbi.by/16,drawbuf);
|
|
|
|
/* find a rasterizer that matches our current state */
|
|
pixels = triangle_create_work_item(/*v, */drawbuf, texcount);
|
|
|
|
/* update stats */
|
|
v->reg[fbiTrianglesOut].u++;
|
|
|
|
/* update stats */
|
|
v->stats.total_triangles++;
|
|
|
|
// profiler_mark_end();
|
|
|
|
/* 1 pixel per clock, plus some setup time */
|
|
if (LOG_REGISTERS) BX_DEBUG(("cycles = %d", TRIANGLE_SETUP_CLOCKS + pixels));
|
|
return TRIANGLE_SETUP_CLOCKS + pixels;
|
|
}
|
|
|
|
|
|
static void raster_fastfill(void *destbase, Bit32s y, const poly_extent *extent, const void *extradata, int threadid)
|
|
{
|
|
const poly_extra_data *extra = (const poly_extra_data *)extradata;
|
|
voodoo_state *v = extra->state;
|
|
stats_block *stats = &v->thread_stats[threadid];
|
|
Bit32s startx = extent->startx;
|
|
Bit32s stopx = extent->stopx;
|
|
int scry, x;
|
|
|
|
/* determine the screen Y */
|
|
scry = y;
|
|
if (FBZMODE_Y_ORIGIN(v->reg[fbzMode].u))
|
|
scry = (v->fbi.yorigin - y) & 0x3ff;
|
|
|
|
/* fill this RGB row */
|
|
if (FBZMODE_RGB_BUFFER_MASK(v->reg[fbzMode].u))
|
|
{
|
|
const Bit16u *ditherow = &extra->dither[(y & 3) * 4];
|
|
Bit64u expanded = *(Bit64u *)ditherow;
|
|
Bit16u *dest = (Bit16u *)destbase + scry * v->fbi.rowpixels;
|
|
|
|
for (x = startx; x < stopx && (x & 3) != 0; x++)
|
|
dest[x] = ditherow[x & 3];
|
|
for ( ; x < (stopx & ~3); x += 4)
|
|
*(Bit64u *)&dest[x] = expanded;
|
|
for ( ; x < stopx; x++)
|
|
dest[x] = ditherow[x & 3];
|
|
stats->pixels_out += stopx - startx;
|
|
}
|
|
|
|
/* fill this dest buffer row */
|
|
if (FBZMODE_AUX_BUFFER_MASK(v->reg[fbzMode].u) && v->fbi.auxoffs != (Bit32u)~0)
|
|
{
|
|
Bit16u color = v->reg[zaColor].u;
|
|
Bit64u expanded = ((Bit64u)color << 48) | ((Bit64u)color << 32) | (color << 16) | color;
|
|
Bit16u *dest = (Bit16u *)(v->fbi.ram + v->fbi.auxoffs) + scry * v->fbi.rowpixels;
|
|
|
|
for (x = startx; x < stopx && (x & 3) != 0; x++)
|
|
dest[x] = color;
|
|
for ( ; x < (stopx & ~3); x += 4)
|
|
*(Bit64u *)&dest[x] = expanded;
|
|
for ( ; x < stopx; x++)
|
|
dest[x] = color;
|
|
}
|
|
}
|
|
|
|
|
|
Bit32u poly_render_triangle_custom(/*poly_manager *poly, */void *dest, const rectangle *cliprect, poly_draw_scanline_func callback, int startscanline, int numscanlines, const poly_extent *extents, poly_extra_data *extra)
|
|
{
|
|
Bit32s curscan, scaninc;
|
|
// polygon_info *polygon;
|
|
Bit32s v1yclip, v3yclip;
|
|
Bit32s pixels = 0;
|
|
// Bit32u startunit;
|
|
|
|
/* clip coordinates */
|
|
if (cliprect != NULL)
|
|
{
|
|
v1yclip = MAX(startscanline, cliprect->min_y);
|
|
v3yclip = MIN(startscanline + numscanlines, cliprect->max_y + 1);
|
|
}
|
|
else
|
|
{
|
|
v1yclip = startscanline;
|
|
v3yclip = startscanline + numscanlines;
|
|
}
|
|
if (v3yclip - v1yclip <= 0)
|
|
return 0;
|
|
|
|
/* allocate a new polygon */
|
|
// polygon = allocate_polygon(poly, v1yclip, v3yclip);
|
|
|
|
/* fill in the polygon information */
|
|
//polygon->poly = poly;
|
|
//polygon->dest = dest;
|
|
//polygon->callback = callback;
|
|
//polygon->extra = poly->extra[poly->extra_next - 1];
|
|
//polygon->numparams = 0;
|
|
//polygon->numverts = 3;
|
|
|
|
/* compute the X extents for each scanline */
|
|
// startunit = poly->unit_next;
|
|
for (curscan = v1yclip; curscan < v3yclip; curscan += scaninc)
|
|
{
|
|
// Bit32u bucketnum = ((Bit32u)curscan / SCANLINES_PER_BUCKET) % TOTAL_BUCKETS;
|
|
// Bit32u unit_index = poly->unit_next++;
|
|
// tri_work_unit *unit = &poly->unit[unit_index]->tri;
|
|
// tri_work_unit unit;
|
|
|
|
int extnum=0;
|
|
|
|
/* determine how much to advance to hit the next bucket */
|
|
// scaninc = SCANLINES_PER_BUCKET - (Bit32u)curscan % SCANLINES_PER_BUCKET;
|
|
scaninc = 1;
|
|
|
|
/* fill in the work unit basics */
|
|
//unit->shared.polygon = polygon;
|
|
//unit->shared.count_next = MIN(v3yclip - curscan, scaninc);
|
|
//unit->shared.scanline = curscan;
|
|
//unit->shared.previtem = poly->unit_bucket[bucketnum];
|
|
//poly->unit_bucket[bucketnum] = unit_index;
|
|
|
|
/* iterate over extents */
|
|
// for (extnum = 0; extnum < unit->shared.count_next; extnum++)
|
|
{
|
|
const poly_extent *extent = &extents[(curscan + extnum) - startscanline];
|
|
Bit32s istartx = extent->startx, istopx = extent->stopx;
|
|
|
|
/* force start < stop */
|
|
if (istartx > istopx)
|
|
{
|
|
Bit32s temp = istartx;
|
|
istartx = istopx;
|
|
istopx = temp;
|
|
}
|
|
|
|
/* apply left/right clipping */
|
|
if (cliprect != NULL)
|
|
{
|
|
if (istartx < cliprect->min_x)
|
|
istartx = cliprect->min_x;
|
|
if (istopx > cliprect->max_x)
|
|
istopx = cliprect->max_x + 1;
|
|
}
|
|
|
|
/* set the extent and update the total pixel count */
|
|
// unit.extent[extnum].startx = istartx;
|
|
// unit.extent[extnum].stopx = istopx;
|
|
(callback)(dest,curscan,extent,extra,0);
|
|
if (istartx < istopx)
|
|
pixels += istopx - istartx;
|
|
}
|
|
}
|
|
#if KEEP_STATISTICS
|
|
poly->unit_max = MAX(poly->unit_max, poly->unit_next);
|
|
#endif
|
|
|
|
|
|
/* enqueue the work items */
|
|
// if (poly->queue != NULL)
|
|
// osd_work_item_queue_multiple(poly->queue, poly_item_callback, poly->unit_next - startunit, poly->unit[startunit], poly->unit_size, WORK_ITEM_FLAG_AUTO_RELEASE);
|
|
|
|
/* return the total number of pixels in the object */
|
|
// poly->triangles++;
|
|
// poly->pixels += pixels;
|
|
return pixels;
|
|
}
|
|
|
|
Bit32s fastfill(voodoo_state *v)
|
|
{
|
|
int sx = (v->reg[clipLeftRight].u >> 16) & 0x3ff;
|
|
int ex = (v->reg[clipLeftRight].u >> 0) & 0x3ff;
|
|
int sy = (v->reg[clipLowYHighY].u >> 16) & 0x3ff;
|
|
int ey = (v->reg[clipLowYHighY].u >> 0) & 0x3ff;
|
|
poly_extent extents[64];
|
|
Bit16u dithermatrix[16];
|
|
Bit16u *drawbuf = NULL;
|
|
Bit32u pixels = 0;
|
|
int extnum, x, y;
|
|
|
|
/* if we're not clearing either, take no time */
|
|
if (!FBZMODE_RGB_BUFFER_MASK(v->reg[fbzMode].u) && !FBZMODE_AUX_BUFFER_MASK(v->reg[fbzMode].u))
|
|
return 0;
|
|
|
|
/* are we clearing the RGB buffer? */
|
|
if (FBZMODE_RGB_BUFFER_MASK(v->reg[fbzMode].u))
|
|
{
|
|
/* determine the draw buffer */
|
|
int destbuf = (v->type >= VOODOO_BANSHEE) ? 1 : FBZMODE_DRAW_BUFFER(v->reg[fbzMode].u);
|
|
switch (destbuf)
|
|
{
|
|
case 0: /* front buffer */
|
|
drawbuf = (Bit16u *)(v->fbi.ram + v->fbi.rgboffs[v->fbi.frontbuf]);
|
|
break;
|
|
|
|
case 1: /* back buffer */
|
|
drawbuf = (Bit16u *)(v->fbi.ram + v->fbi.rgboffs[v->fbi.backbuf]);
|
|
break;
|
|
|
|
default: /* reserved */
|
|
break;
|
|
}
|
|
|
|
/* determine the dither pattern */
|
|
for (y = 0; y < 4; y++)
|
|
{
|
|
DECLARE_DITHER_POINTERS;
|
|
UNUSED(dither);
|
|
COMPUTE_DITHER_POINTERS(v->reg[fbzMode].u, y);
|
|
for (x = 0; x < 4; x++)
|
|
{
|
|
int r = v->reg[color1].rgb.r;
|
|
int g = v->reg[color1].rgb.g;
|
|
int b = v->reg[color1].rgb.b;
|
|
|
|
APPLY_DITHER(v->reg[fbzMode].u, x, dither_lookup, r, g, b);
|
|
dithermatrix[y*4 + x] = (r << 11) | (g << 5) | b;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* fill in a block of extents */
|
|
extents[0].startx = sx;
|
|
extents[0].stopx = ex;
|
|
for (extnum = 1; extnum < (int)ARRAY_LENGTH(extents); extnum++)
|
|
extents[extnum] = extents[0];
|
|
|
|
poly_extra_data extra; //(poly_extra_data *)poly_get_extra_data(v->poly);
|
|
/* iterate over blocks of extents */
|
|
for (y = sy; y < ey; y += ARRAY_LENGTH(extents))
|
|
{
|
|
int count = MIN(ey - y, (int) ARRAY_LENGTH(extents));
|
|
|
|
extra.state = v;
|
|
memcpy(extra.dither, dithermatrix, sizeof(extra.dither));
|
|
|
|
pixels += poly_render_triangle_custom(drawbuf, NULL, raster_fastfill, y, count, extents, &extra);
|
|
}
|
|
|
|
/* 2 pixels per clock */
|
|
return pixels / 2;
|
|
}
|
|
|
|
void swap_buffers(voodoo_state *v)
|
|
{
|
|
int count;
|
|
// if (LOG_VBLANK_SWAP) BX_DEBUG(("--- swap_buffers @ %d", video_screen_get_vpos(v->screen)));
|
|
|
|
/* force a partial update */
|
|
// video_screen_update_partial(v->screen, video_screen_get_vpos(v->screen));
|
|
v->fbi.video_changed = 1;
|
|
|
|
/* keep a history of swap intervals */
|
|
count = v->fbi.vblank_count;
|
|
if (count > 15)
|
|
count = 15;
|
|
v->reg[fbiSwapHistory].u = (v->reg[fbiSwapHistory].u << 4) | count;
|
|
|
|
/* rotate the buffers */
|
|
if (v->type <= VOODOO_2)
|
|
{
|
|
if (v->type < VOODOO_2 || !v->fbi.vblank_dont_swap)
|
|
{
|
|
if (v->fbi.rgboffs[2] == (Bit32u)~0)
|
|
{
|
|
v->fbi.frontbuf = 1 - v->fbi.frontbuf;
|
|
v->fbi.backbuf = 1 - v->fbi.frontbuf;
|
|
}
|
|
else
|
|
{
|
|
v->fbi.frontbuf = (v->fbi.frontbuf + 1) % 3;
|
|
v->fbi.backbuf = (v->fbi.frontbuf + 1) % 3;
|
|
}
|
|
}
|
|
}
|
|
else
|
|
v->fbi.rgboffs[0] = v->reg[leftOverlayBuf].u & v->fbi.mask & ~0x0f;
|
|
|
|
/* decrement the pending count and reset our state */
|
|
if (v->fbi.swaps_pending)
|
|
v->fbi.swaps_pending--;
|
|
v->fbi.vblank_count = 0;
|
|
v->fbi.vblank_swap_pending = 0;
|
|
|
|
/* reset the last_op_time to now and start processing the next command */
|
|
if (v->pci.op_pending)
|
|
{
|
|
// v->pci.op_end_time = timer_get_time(v->device->machine);
|
|
// flush_fifos(v, v->pci.op_end_time);
|
|
}
|
|
|
|
/* we may be able to unstall now */
|
|
// if (v->pci.stall_state != NOT_STALLED)
|
|
// check_stalled_cpu(v, timer_get_time(v->device->machine));
|
|
|
|
/* periodically log rasterizer info */
|
|
v->stats.swaps++;
|
|
// if (LOG_RASTERIZERS && v->stats.swaps % 100 == 0)
|
|
// dump_rasterizer_stats(v);
|
|
|
|
/* update the statistics (debug) */
|
|
if (v->stats.display)
|
|
{
|
|
/*
|
|
const rectangle *visible_area = video_screen_get_visible_area(v->screen);
|
|
int screen_area = (visible_area->max_x - visible_area->min_x + 1) * (visible_area->max_y - visible_area->min_y + 1);
|
|
char *statsptr = v->stats.buffer;
|
|
int pixelcount;
|
|
int i;
|
|
|
|
update_statistics(v, TRUE);
|
|
pixelcount = v->stats.total_pixels_out;
|
|
|
|
statsptr += sprintf(statsptr, "Swap:%6d\n", v->stats.swaps);
|
|
statsptr += sprintf(statsptr, "Hist:%08X\n", v->reg[fbiSwapHistory].u);
|
|
statsptr += sprintf(statsptr, "Stal:%6d\n", v->stats.stalls);
|
|
statsptr += sprintf(statsptr, "Rend:%6d%%\n", pixelcount * 100 / screen_area);
|
|
statsptr += sprintf(statsptr, "Poly:%6d\n", v->stats.total_triangles);
|
|
statsptr += sprintf(statsptr, "PxIn:%6d\n", v->stats.total_pixels_in);
|
|
statsptr += sprintf(statsptr, "POut:%6d\n", v->stats.total_pixels_out);
|
|
statsptr += sprintf(statsptr, "Clip:%6d\n", v->stats.total_clipped);
|
|
statsptr += sprintf(statsptr, "Stip:%6d\n", v->stats.total_stippled);
|
|
statsptr += sprintf(statsptr, "Chro:%6d\n", v->stats.total_chroma_fail);
|
|
statsptr += sprintf(statsptr, "ZFun:%6d\n", v->stats.total_zfunc_fail);
|
|
statsptr += sprintf(statsptr, "AFun:%6d\n", v->stats.total_afunc_fail);
|
|
statsptr += sprintf(statsptr, "RegW:%6d\n", v->stats.reg_writes);
|
|
statsptr += sprintf(statsptr, "RegR:%6d\n", v->stats.reg_reads);
|
|
statsptr += sprintf(statsptr, "LFBW:%6d\n", v->stats.lfb_writes);
|
|
statsptr += sprintf(statsptr, "LFBR:%6d\n", v->stats.lfb_reads);
|
|
statsptr += sprintf(statsptr, "TexW:%6d\n", v->stats.tex_writes);
|
|
statsptr += sprintf(statsptr, "TexM:");
|
|
for (i = 0; i < 16; i++)
|
|
if (v->stats.texture_mode[i])
|
|
*statsptr++ = "0123456789ABCDEF"[i];
|
|
*statsptr = 0;
|
|
*/
|
|
}
|
|
|
|
/* update statistics */
|
|
v->stats.stalls = 0;
|
|
v->stats.total_triangles = 0;
|
|
v->stats.total_pixels_in = 0;
|
|
v->stats.total_pixels_out = 0;
|
|
v->stats.total_chroma_fail = 0;
|
|
v->stats.total_zfunc_fail = 0;
|
|
v->stats.total_afunc_fail = 0;
|
|
v->stats.total_clipped = 0;
|
|
v->stats.total_stippled = 0;
|
|
v->stats.reg_writes = 0;
|
|
v->stats.reg_reads = 0;
|
|
v->stats.lfb_writes = 0;
|
|
v->stats.lfb_reads = 0;
|
|
v->stats.tex_writes = 0;
|
|
memset(v->stats.texture_mode, 0, sizeof(v->stats.texture_mode));
|
|
}
|
|
|
|
/*-------------------------------------------------
|
|
swapbuffer - execute the 'swapbuffer'
|
|
command
|
|
-------------------------------------------------*/
|
|
Bit32s swapbuffer(voodoo_state *v, Bit32u data)
|
|
{
|
|
/* set the don't swap value for Voodoo 2 */
|
|
v->fbi.vblank_swap_pending = 1;
|
|
v->fbi.vblank_swap = (data >> 1) & 0xff;
|
|
v->fbi.vblank_dont_swap = (data >> 9) & 1;
|
|
|
|
/* if we're not syncing to the retrace, process the command immediately */
|
|
// if (!(data & 1))
|
|
{
|
|
swap_buffers(v);
|
|
return 0;
|
|
}
|
|
|
|
/* determine how many cycles to wait; we deliberately overshoot here because */
|
|
/* the final count gets updated on the VBLANK */
|
|
return (v->fbi.vblank_swap + 1) * v->freq / 30;
|
|
}
|
|
|
|
|
|
/*************************************
|
|
*
|
|
* Statistics management
|
|
*
|
|
*************************************/
|
|
|
|
static void accumulate_statistics(voodoo_state *v, const stats_block *stats)
|
|
{
|
|
/* apply internal voodoo statistics */
|
|
v->reg[fbiPixelsIn].u += stats->pixels_in;
|
|
v->reg[fbiPixelsOut].u += stats->pixels_out;
|
|
v->reg[fbiChromaFail].u += stats->chroma_fail;
|
|
v->reg[fbiZfuncFail].u += stats->zfunc_fail;
|
|
v->reg[fbiAfuncFail].u += stats->afunc_fail;
|
|
|
|
/* apply emulation statistics */
|
|
v->stats.total_pixels_in += stats->pixels_in;
|
|
v->stats.total_pixels_out += stats->pixels_out;
|
|
v->stats.total_chroma_fail += stats->chroma_fail;
|
|
v->stats.total_zfunc_fail += stats->zfunc_fail;
|
|
v->stats.total_afunc_fail += stats->afunc_fail;
|
|
v->stats.total_clipped += stats->clip_fail;
|
|
v->stats.total_stippled += stats->stipple_count;
|
|
}
|
|
|
|
static void update_statistics(voodoo_state *v, int accumulate)
|
|
{
|
|
int threadnum;
|
|
|
|
/* accumulate/reset statistics from all units */
|
|
for (threadnum = 0; threadnum < WORK_MAX_THREADS; threadnum++)
|
|
{
|
|
if (accumulate)
|
|
accumulate_statistics(v, &v->thread_stats[threadnum]);
|
|
memset(&v->thread_stats[threadnum], 0, sizeof(v->thread_stats[threadnum]));
|
|
}
|
|
|
|
/* accumulate/reset statistics from the LFB */
|
|
if (accumulate)
|
|
accumulate_statistics(v, &v->fbi.lfb_stats);
|
|
memset(&v->fbi.lfb_stats, 0, sizeof(v->fbi.lfb_stats));
|
|
}
|
|
|
|
void reset_counters(voodoo_state *v)
|
|
{
|
|
update_statistics(v, FALSE);
|
|
v->reg[fbiPixelsIn].u = 0;
|
|
v->reg[fbiChromaFail].u = 0;
|
|
v->reg[fbiZfuncFail].u = 0;
|
|
v->reg[fbiAfuncFail].u = 0;
|
|
v->reg[fbiPixelsOut].u = 0;
|
|
}
|
|
|
|
|
|
void soft_reset(voodoo_state *v)
|
|
{
|
|
reset_counters(v);
|
|
v->reg[fbiTrianglesOut].u = 0;
|
|
fifo_reset(&v->fbi.fifo);
|
|
fifo_reset(&v->pci.fifo);
|
|
}
|
|
|
|
|
|
void recompute_video_memory(voodoo_state *v)
|
|
{
|
|
Bit32u buffer_pages = FBIINIT2_VIDEO_BUFFER_OFFSET(v->reg[fbiInit2].u);
|
|
Bit32u fifo_start_page = FBIINIT4_MEMORY_FIFO_START_ROW(v->reg[fbiInit4].u);
|
|
Bit32u fifo_last_page = FBIINIT4_MEMORY_FIFO_STOP_ROW(v->reg[fbiInit4].u);
|
|
Bit32u memory_config;
|
|
int buf;
|
|
|
|
BX_DEBUG(("buffer_pages 0x%x", buffer_pages));
|
|
/* memory config is determined differently between V1 and V2 */
|
|
memory_config = FBIINIT2_ENABLE_TRIPLE_BUF(v->reg[fbiInit2].u);
|
|
if (v->type == VOODOO_2 && memory_config == 0)
|
|
memory_config = FBIINIT5_BUFFER_ALLOCATION(v->reg[fbiInit5].u);
|
|
|
|
/* tiles are 64x16/32; x_tiles specifies how many half-tiles */
|
|
v->fbi.tile_width = (v->type == VOODOO_1) ? 64 : 32;
|
|
v->fbi.tile_height = (v->type == VOODOO_1) ? 16 : 32;
|
|
v->fbi.x_tiles = FBIINIT1_X_VIDEO_TILES(v->reg[fbiInit1].u);
|
|
if (v->type == VOODOO_2)
|
|
{
|
|
v->fbi.x_tiles = (v->fbi.x_tiles << 1) |
|
|
(FBIINIT1_X_VIDEO_TILES_BIT5(v->reg[fbiInit1].u) << 5) |
|
|
(FBIINIT6_X_VIDEO_TILES_BIT0(v->reg[fbiInit6].u));
|
|
}
|
|
v->fbi.rowpixels = v->fbi.tile_width * v->fbi.x_tiles;
|
|
|
|
// logerror("VOODOO.%d.VIDMEM: buffer_pages=%X fifo=%X-%X tiles=%X rowpix=%d\n", v->index, buffer_pages, fifo_start_page, fifo_last_page, v->fbi.x_tiles, v->fbi.rowpixels);
|
|
|
|
/* first RGB buffer always starts at 0 */
|
|
v->fbi.rgboffs[0] = 0;
|
|
|
|
if (buffer_pages>0) {
|
|
/* second RGB buffer starts immediately afterwards */
|
|
v->fbi.rgboffs[1] = buffer_pages * 0x1000;
|
|
|
|
/* remaining buffers are based on the config */
|
|
switch (memory_config) {
|
|
case 3: /* reserved */
|
|
BX_ERROR(("Unexpected memory configuration in recompute_video_memory!"));
|
|
break;
|
|
|
|
case 0: /* 2 color buffers, 1 aux buffer */
|
|
v->fbi.rgboffs[2] = ~0;
|
|
v->fbi.auxoffs = 2 * buffer_pages * 0x1000;
|
|
break;
|
|
|
|
case 1: /* 3 color buffers, 0 aux buffers */
|
|
v->fbi.rgboffs[2] = 2 * buffer_pages * 0x1000;
|
|
//v->fbi.auxoffs = ~0;
|
|
v->fbi.auxoffs = 3 * buffer_pages * 0x1000;
|
|
break;
|
|
|
|
case 2: /* 3 color buffers, 1 aux buffers */
|
|
v->fbi.rgboffs[2] = 2 * buffer_pages * 0x1000;
|
|
v->fbi.auxoffs = 3 * buffer_pages * 0x1000;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* clamp the RGB buffers to video memory */
|
|
for (buf = 0; buf < 3; buf++)
|
|
if (v->fbi.rgboffs[buf] != (Bit32u)~0 && v->fbi.rgboffs[buf] > v->fbi.mask)
|
|
v->fbi.rgboffs[buf] = v->fbi.mask;
|
|
|
|
/* clamp the aux buffer to video memory */
|
|
if (v->fbi.auxoffs != (Bit32u)~0 && v->fbi.auxoffs > v->fbi.mask)
|
|
v->fbi.auxoffs = v->fbi.mask;
|
|
|
|
/* mame_printf_debug("rgb[0] = %08X rgb[1] = %08X rgb[2] = %08X aux = %08X\n",
|
|
v->fbi.rgboffs[0], v->fbi.rgboffs[1], v->fbi.rgboffs[2], v->fbi.auxoffs);*/
|
|
|
|
/* compute the memory FIFO location and size */
|
|
if (fifo_last_page > v->fbi.mask / 0x1000)
|
|
fifo_last_page = v->fbi.mask / 0x1000;
|
|
|
|
/* is it valid and enabled? */
|
|
if (fifo_start_page <= fifo_last_page && FBIINIT0_ENABLE_MEMORY_FIFO(v->reg[fbiInit0].u))
|
|
{
|
|
v->fbi.fifo.base = (Bit32u *)(v->fbi.ram + fifo_start_page * 0x1000);
|
|
v->fbi.fifo.size = (fifo_last_page + 1 - fifo_start_page) * 0x1000 / 4;
|
|
if (v->fbi.fifo.size > 65536*2)
|
|
v->fbi.fifo.size = 65536*2;
|
|
}
|
|
|
|
/* if not, disable the FIFO */
|
|
else
|
|
{
|
|
v->fbi.fifo.base = NULL;
|
|
v->fbi.fifo.size = 0;
|
|
}
|
|
|
|
/* reset the FIFO */
|
|
fifo_reset(&v->fbi.fifo);
|
|
|
|
/* reset our front/back buffers if they are out of range */
|
|
if (v->fbi.rgboffs[2] == (Bit32u)~0)
|
|
{
|
|
if (v->fbi.frontbuf == 2)
|
|
v->fbi.frontbuf = 0;
|
|
if (v->fbi.backbuf == 2)
|
|
v->fbi.backbuf = 0;
|
|
}
|
|
}
|
|
|
|
void dacdata_w(dac_state *d, Bit8u regnum, Bit8u data)
|
|
{
|
|
d->reg[regnum] = data;
|
|
|
|
/* switch off the DAC register requested */
|
|
switch (regnum) {
|
|
case 4: // PLLWMA
|
|
case 7: // PLLRMA
|
|
if (data == 0x0e) {
|
|
d->data_size = 1;
|
|
} else {
|
|
d->data_size = 2;
|
|
}
|
|
break;
|
|
case 5: // PLLDATA
|
|
switch (d->reg[4]) { // PLLWMA
|
|
case 0x00:
|
|
if (d->data_size == 2) {
|
|
d->clk0_m = data;
|
|
} else if (d->data_size == 1) {
|
|
d->clk0_n = data & 0x1f;
|
|
d->clk0_p = data >> 5;
|
|
}
|
|
break;
|
|
case 0x0e:
|
|
if ((d->data_size == 1) && ((data & 0x21) == 0x21)) {
|
|
d->clk0_freq = (Bit32u)((14318.0 * (d->clk0_m + 2)) / ((1 << d->clk0_p) * (d->clk0_n + 2)));
|
|
Voodoo_update_timing();
|
|
}
|
|
break;
|
|
}
|
|
d->data_size--;
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
void dacdata_r(dac_state *d, Bit8u regnum)
|
|
{
|
|
Bit8u result = 0xff;
|
|
|
|
/* switch off the DAC register requested */
|
|
switch (regnum) {
|
|
case 5: // PLLDATA
|
|
switch (d->reg[7]) { // PLLRMA
|
|
case 0x00:
|
|
if (d->data_size == 2) {
|
|
result = d->clk0_m;
|
|
} else if (d->data_size == 1) {
|
|
result = d->clk0_n | (d->clk0_p << 5);
|
|
}
|
|
break;
|
|
/* this is just to make startup happy */
|
|
case 0x01: result = 0x55; break;
|
|
case 0x07: result = 0x71; break;
|
|
case 0x0b: result = 0x79; break;
|
|
}
|
|
d->data_size--;
|
|
break;
|
|
|
|
default:
|
|
result = d->reg[regnum];
|
|
break;
|
|
}
|
|
|
|
/* remember the read result; it is fetched elsewhere */
|
|
d->read_result = result;
|
|
}
|
|
|
|
voodoo_reg reg;
|
|
|
|
void register_w(Bit32u offset, Bit32u data)
|
|
{
|
|
Bit32u regnum = (offset) & 0xff;
|
|
Bit32u chips = (offset>>8) & 0xf;
|
|
reg.u = data;
|
|
|
|
// Bit32u origdata = data;
|
|
// Bit32s cycles = 0;
|
|
Bit64s data64;
|
|
|
|
BX_DEBUG(("write chip 0x%x reg 0x%x value 0x%08x(%s)", chips, regnum<<2, data, voodoo_reg_name[regnum]));
|
|
voodoo_last_msg=regnum;
|
|
|
|
if (chips == 0)
|
|
chips = 0xf;
|
|
|
|
/* the first 64 registers can be aliased differently */
|
|
if ((offset & 0x800c0) == 0x80000 && v->alt_regmap)
|
|
regnum = register_alias_map[offset & 0x3f];
|
|
else
|
|
regnum = offset & 0xff;
|
|
|
|
/* first make sure this register is writable */
|
|
if (!(v->regaccess[regnum] & REGISTER_WRITE)) {
|
|
BX_ERROR(("Invalid attempt to write %s", v->regnames[regnum]));
|
|
return;
|
|
}
|
|
|
|
switch (regnum) {
|
|
/* Vertex data is 12.4 formatted fixed point */
|
|
case fvertexAx:
|
|
data = float_to_Bit32s(data, 4);
|
|
case vertexAx:
|
|
if (chips & 1) v->fbi.ax = (Bit16s)data;
|
|
break;
|
|
|
|
case fvertexAy:
|
|
data = float_to_Bit32s(data, 4);
|
|
case vertexAy:
|
|
if (chips & 1) v->fbi.ay = (Bit16s)data;
|
|
break;
|
|
|
|
case fvertexBx:
|
|
data = float_to_Bit32s(data, 4);
|
|
case vertexBx:
|
|
if (chips & 1) v->fbi.bx = (Bit16s)data;
|
|
break;
|
|
|
|
case fvertexBy:
|
|
data = float_to_Bit32s(data, 4);
|
|
case vertexBy:
|
|
if (chips & 1) v->fbi.by = (Bit16s)data;
|
|
break;
|
|
|
|
case fvertexCx:
|
|
data = float_to_Bit32s(data, 4);
|
|
case vertexCx:
|
|
if (chips & 1) v->fbi.cx = (Bit16s)data;
|
|
break;
|
|
|
|
case fvertexCy:
|
|
data = float_to_Bit32s(data, 4);
|
|
case vertexCy:
|
|
if (chips & 1) v->fbi.cy = (Bit16s)data;
|
|
break;
|
|
|
|
/* RGB data is 12.12 formatted fixed point */
|
|
case fstartR:
|
|
data = float_to_Bit32s(data, 12);
|
|
case startR:
|
|
if (chips & 1) v->fbi.startr = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
case fstartG:
|
|
data = float_to_Bit32s(data, 12);
|
|
case startG:
|
|
if (chips & 1) v->fbi.startg = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
case fstartB:
|
|
data = float_to_Bit32s(data, 12);
|
|
case startB:
|
|
if (chips & 1) v->fbi.startb = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
case fstartA:
|
|
data = float_to_Bit32s(data, 12);
|
|
case startA:
|
|
if (chips & 1) v->fbi.starta = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
case fdRdX:
|
|
data = float_to_Bit32s(data, 12);
|
|
case dRdX:
|
|
if (chips & 1) v->fbi.drdx = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
case fdGdX:
|
|
data = float_to_Bit32s(data, 12);
|
|
case dGdX:
|
|
if (chips & 1) v->fbi.dgdx = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
case fdBdX:
|
|
data = float_to_Bit32s(data, 12);
|
|
case dBdX:
|
|
if (chips & 1) v->fbi.dbdx = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
case fdAdX:
|
|
data = float_to_Bit32s(data, 12);
|
|
case dAdX:
|
|
if (chips & 1) v->fbi.dadx = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
case fdRdY:
|
|
data = float_to_Bit32s(data, 12);
|
|
case dRdY:
|
|
if (chips & 1) v->fbi.drdy = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
case fdGdY:
|
|
data = float_to_Bit32s(data, 12);
|
|
case dGdY:
|
|
if (chips & 1) v->fbi.dgdy = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
case fdBdY:
|
|
data = float_to_Bit32s(data, 12);
|
|
case dBdY:
|
|
if (chips & 1) v->fbi.dbdy = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
case fdAdY:
|
|
data = float_to_Bit32s(data, 12);
|
|
case dAdY:
|
|
if (chips & 1) v->fbi.dady = (Bit32s)(data << 8) >> 8;
|
|
break;
|
|
|
|
/* Z data is 20.12 formatted fixed point */
|
|
case fstartZ:
|
|
data = float_to_Bit32s(data, 12);
|
|
case startZ:
|
|
if (chips & 1) v->fbi.startz = (Bit32s)data;
|
|
break;
|
|
|
|
case fdZdX:
|
|
data = float_to_Bit32s(data, 12);
|
|
case dZdX:
|
|
if (chips & 1) v->fbi.dzdx = (Bit32s)data;
|
|
break;
|
|
|
|
case fdZdY:
|
|
data = float_to_Bit32s(data, 12);
|
|
case dZdY:
|
|
if (chips & 1) v->fbi.dzdy = (Bit32s)data;
|
|
break;
|
|
|
|
/* S,T data is 14.18 formatted fixed point, converted to 16.32 internally */
|
|
case fstartS:
|
|
data64 = float_to_Bit64s(data, 32);
|
|
if (chips & 2) v->tmu[0].starts = data64;
|
|
if (chips & 4) v->tmu[1].starts = data64;
|
|
break;
|
|
case startS:
|
|
if (chips & 2) v->tmu[0].starts = (Bit64s)(Bit32s)data << 14;
|
|
if (chips & 4) v->tmu[1].starts = (Bit64s)(Bit32s)data << 14;
|
|
break;
|
|
|
|
case fstartT:
|
|
data64 = float_to_Bit64s(data, 32);
|
|
if (chips & 2) v->tmu[0].startt = data64;
|
|
if (chips & 4) v->tmu[1].startt = data64;
|
|
break;
|
|
case startT:
|
|
if (chips & 2) v->tmu[0].startt = (Bit64s)(Bit32s)data << 14;
|
|
if (chips & 4) v->tmu[1].startt = (Bit64s)(Bit32s)data << 14;
|
|
break;
|
|
|
|
case fdSdX:
|
|
data64 = float_to_Bit64s(data, 32);
|
|
if (chips & 2) v->tmu[0].dsdx = data64;
|
|
if (chips & 4) v->tmu[1].dsdx = data64;
|
|
break;
|
|
case dSdX:
|
|
if (chips & 2) v->tmu[0].dsdx = (Bit64s)(Bit32s)data << 14;
|
|
if (chips & 4) v->tmu[1].dsdx = (Bit64s)(Bit32s)data << 14;
|
|
break;
|
|
|
|
case fdTdX:
|
|
data64 = float_to_Bit64s(data, 32);
|
|
if (chips & 2) v->tmu[0].dtdx = data64;
|
|
if (chips & 4) v->tmu[1].dtdx = data64;
|
|
break;
|
|
case dTdX:
|
|
if (chips & 2) v->tmu[0].dtdx = (Bit64s)(Bit32s)data << 14;
|
|
if (chips & 4) v->tmu[1].dtdx = (Bit64s)(Bit32s)data << 14;
|
|
break;
|
|
|
|
case fdSdY:
|
|
data64 = float_to_Bit64s(data, 32);
|
|
if (chips & 2) v->tmu[0].dsdy = data64;
|
|
if (chips & 4) v->tmu[1].dsdy = data64;
|
|
break;
|
|
case dSdY:
|
|
if (chips & 2) v->tmu[0].dsdy = (Bit64s)(Bit32s)data << 14;
|
|
if (chips & 4) v->tmu[1].dsdy = (Bit64s)(Bit32s)data << 14;
|
|
break;
|
|
|
|
case fdTdY:
|
|
data64 = float_to_Bit64s(data, 32);
|
|
if (chips & 2) v->tmu[0].dtdy = data64;
|
|
if (chips & 4) v->tmu[1].dtdy = data64;
|
|
break;
|
|
case dTdY:
|
|
if (chips & 2) v->tmu[0].dtdy = (Bit64s)(Bit32s)data << 14;
|
|
if (chips & 4) v->tmu[1].dtdy = (Bit64s)(Bit32s)data << 14;
|
|
break;
|
|
|
|
/* W data is 2.30 formatted fixed point, converted to 16.32 internally */
|
|
case fstartW:
|
|
data64 = float_to_Bit64s(data, 32);
|
|
if (chips & 1) v->fbi.startw = data64;
|
|
if (chips & 2) v->tmu[0].startw = data64;
|
|
if (chips & 4) v->tmu[1].startw = data64;
|
|
break;
|
|
case startW:
|
|
if (chips & 1) v->fbi.startw = (Bit64s)(Bit32s)data << 2;
|
|
if (chips & 2) v->tmu[0].startw = (Bit64s)(Bit32s)data << 2;
|
|
if (chips & 4) v->tmu[1].startw = (Bit64s)(Bit32s)data << 2;
|
|
break;
|
|
|
|
case fdWdX:
|
|
data64 = float_to_Bit64s(data, 32);
|
|
if (chips & 1) v->fbi.dwdx = data64;
|
|
if (chips & 2) v->tmu[0].dwdx = data64;
|
|
if (chips & 4) v->tmu[1].dwdx = data64;
|
|
break;
|
|
case dWdX:
|
|
if (chips & 1) v->fbi.dwdx = (Bit64s)(Bit32s)data << 2;
|
|
if (chips & 2) v->tmu[0].dwdx = (Bit64s)(Bit32s)data << 2;
|
|
if (chips & 4) v->tmu[1].dwdx = (Bit64s)(Bit32s)data << 2;
|
|
break;
|
|
|
|
case fdWdY:
|
|
data64 = float_to_Bit64s(data, 32);
|
|
if (chips & 1) v->fbi.dwdy = data64;
|
|
if (chips & 2) v->tmu[0].dwdy = data64;
|
|
if (chips & 4) v->tmu[1].dwdy = data64;
|
|
break;
|
|
case dWdY:
|
|
if (chips & 1) v->fbi.dwdy = (Bit64s)(Bit32s)data << 2;
|
|
if (chips & 2) v->tmu[0].dwdy = (Bit64s)(Bit32s)data << 2;
|
|
if (chips & 4) v->tmu[1].dwdy = (Bit64s)(Bit32s)data << 2;
|
|
break;
|
|
/* setup bits */
|
|
case sARGB:
|
|
if (chips & 1)
|
|
{
|
|
v->reg[sAlpha].f = (float)RGB_ALPHA(data);
|
|
v->reg[sRed].f = (float)RGB_RED(data);
|
|
v->reg[sGreen].f = (float)RGB_GREEN(data);
|
|
v->reg[sBlue].f = (float)RGB_BLUE(data);
|
|
}
|
|
break;
|
|
|
|
/* mask off invalid bits for different cards */
|
|
case fbzColorPath:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (v->type < VOODOO_2)
|
|
data &= 0x0fffffff;
|
|
if (chips & 1) v->reg[fbzColorPath].u = data;
|
|
break;
|
|
|
|
case fbzMode:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (v->type < VOODOO_2)
|
|
data &= 0x001fffff;
|
|
if (chips & 1) v->reg[fbzMode].u = data;
|
|
break;
|
|
|
|
case fogMode:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (v->type < VOODOO_2)
|
|
data &= 0x0000003f;
|
|
if (chips & 1) v->reg[fogMode].u = data;
|
|
break;
|
|
|
|
/* triangle drawing */
|
|
case triangleCMD:
|
|
v->fbi.cheating_allowed = (v->fbi.ax != 0 || v->fbi.ay != 0 || v->fbi.bx > 50 || v->fbi.by != 0 || v->fbi.cx != 0 || v->fbi.cy > 50);
|
|
v->fbi.sign = data;
|
|
/* cycles = */ triangle(v);
|
|
break;
|
|
|
|
case ftriangleCMD:
|
|
v->fbi.cheating_allowed = 1;
|
|
v->fbi.sign = data;
|
|
/* cycles = */ triangle(v);
|
|
break;
|
|
|
|
/* other commands */
|
|
case nopCMD:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (data & 1)
|
|
reset_counters(v);
|
|
if (data & 2)
|
|
v->reg[fbiTrianglesOut].u = 0;
|
|
break;
|
|
|
|
case fastfillCMD:
|
|
/* cycles = */ fastfill(v);
|
|
break;
|
|
|
|
case swapbufferCMD:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
/* cycles = */ swapbuffer(v, data);
|
|
break;
|
|
/* gamma table access -- Voodoo/Voodoo2 only */
|
|
case clutData:
|
|
if (v->type <= VOODOO_2 && (chips & 1))
|
|
{
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (!FBIINIT1_VIDEO_TIMING_RESET(v->reg[fbiInit1].u))
|
|
{
|
|
int index = data >> 24;
|
|
if (index <= 32)
|
|
{
|
|
v->fbi.clut[index] = data;
|
|
v->fbi.clut_dirty = 1;
|
|
}
|
|
}
|
|
else
|
|
BX_DEBUG(("clutData ignored because video timing reset = 1"));
|
|
}
|
|
break;
|
|
/* external DAC access -- Voodoo/Voodoo2 only */
|
|
case dacData:
|
|
if (v->type <= VOODOO_2 /*&& (chips & 1)*/)
|
|
{
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (!(data & 0x800))
|
|
dacdata_w(&v->dac, (data >> 8) & 7, data & 0xff);
|
|
else
|
|
dacdata_r(&v->dac, (data >> 8) & 7);
|
|
}
|
|
break;
|
|
|
|
/* vertical sync rate -- Voodoo/Voodoo2 only */
|
|
case hSync:
|
|
case vSync:
|
|
case backPorch:
|
|
case videoDimensions:
|
|
if (v->type <= VOODOO_2 && (chips & 1))
|
|
{
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
v->reg[regnum].u = data;
|
|
if (v->reg[hSync].u != 0 && v->reg[vSync].u != 0 && v->reg[videoDimensions].u != 0)
|
|
{
|
|
int htotal = ((v->reg[hSync].u >> 16) & 0x3ff) + 1 + (v->reg[hSync].u & 0xff) + 1;
|
|
int vtotal = ((v->reg[vSync].u >> 16) & 0xfff) + (v->reg[vSync].u & 0xfff);
|
|
int hvis = v->reg[videoDimensions].u & 0x3ff;
|
|
int vvis = (v->reg[videoDimensions].u >> 16) & 0x3ff;
|
|
int hbp = (v->reg[backPorch].u & 0xff) + 2;
|
|
int vbp = (v->reg[backPorch].u >> 16) & 0xff;
|
|
rectangle visarea;
|
|
|
|
/* create a new visarea */
|
|
visarea.min_x = hbp;
|
|
visarea.max_x = hbp + hvis - 1;
|
|
visarea.min_y = vbp;
|
|
visarea.max_y = vbp + vvis - 1;
|
|
|
|
/* keep within bounds */
|
|
visarea.max_x = MIN(visarea.max_x, htotal - 1);
|
|
visarea.max_y = MIN(visarea.max_y, vtotal - 1);
|
|
|
|
BX_DEBUG(("hSync=%08X vSync=%08X backPorch=%08X videoDimensions=%08X",
|
|
v->reg[hSync].u, v->reg[vSync].u, v->reg[backPorch].u, v->reg[videoDimensions].u));
|
|
BX_DEBUG(("Horiz: %d-%d (%d total) Vert: %d-%d (%d total) -- ", visarea.min_x, visarea.max_x, htotal, visarea.min_y, visarea.max_y, vtotal));
|
|
|
|
#if 0
|
|
/* compute the new period for standard res, medium res, and VGA res */
|
|
// attoseconds_t refresh = video_screen_get_frame_period(v->screen).attoseconds;
|
|
attoseconds_t stdperiod, medperiod, vgaperiod;
|
|
attoseconds_t stddiff, meddiff, vgadiff;
|
|
|
|
// stdperiod = HZ_TO_ATTOSECONDS(15750) * vtotal;
|
|
// medperiod = HZ_TO_ATTOSECONDS(25000) * vtotal;
|
|
// vgaperiod = HZ_TO_ATTOSECONDS(31500) * vtotal;
|
|
|
|
/* compute a diff against the current refresh period */
|
|
stddiff = stdperiod - refresh;
|
|
if (stddiff < 0) stddiff = -stddiff;
|
|
meddiff = medperiod - refresh;
|
|
if (meddiff < 0) meddiff = -meddiff;
|
|
vgadiff = vgaperiod - refresh;
|
|
if (vgadiff < 0) vgadiff = -vgadiff;
|
|
|
|
/* configure the screen based on which one matches the closest */
|
|
if (stddiff < meddiff && stddiff < vgadiff)
|
|
{
|
|
// video_screen_configure(v->screen, htotal, vtotal, &visarea, stdperiod);
|
|
BX_DEBUG(("Standard resolution, %f Hz", ATTOSECONDS_TO_HZ(stdperiod)));
|
|
}
|
|
else if (meddiff < vgadiff)
|
|
{
|
|
// video_screen_configure(v->screen, htotal, vtotal, &visarea, medperiod);
|
|
BX_DEBUG(("Medium resolution, %f Hz", ATTOSECONDS_TO_HZ(medperiod)));
|
|
}
|
|
else
|
|
{
|
|
// video_screen_configure(v->screen, htotal, vtotal, &visarea, vgaperiod);
|
|
BX_DEBUG(("VGA resolution, %f Hz", ATTOSECONDS_TO_HZ(vgaperiod)));
|
|
}
|
|
#endif
|
|
|
|
/* configure the new framebuffer info */
|
|
v->fbi.width = hvis + 1;
|
|
v->fbi.height = vvis;
|
|
v->fbi.xoffs = hbp;
|
|
v->fbi.yoffs = vbp;
|
|
v->fbi.vsyncscan = (v->reg[vSync].u >> 16) & 0xfff;
|
|
|
|
/* recompute the time of VBLANK */
|
|
// adjust_vblank_timer(v);
|
|
|
|
/* if changing dimensions, update video memory layout */
|
|
if (regnum == videoDimensions)
|
|
recompute_video_memory(v);
|
|
|
|
Voodoo_UpdateScreenStart();
|
|
}
|
|
}
|
|
break;
|
|
|
|
/* fbiInit0 can only be written if initEnable says we can -- Voodoo/Voodoo2 only */
|
|
case fbiInit0:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (v->type <= VOODOO_2 && (chips & 1) && INITEN_ENABLE_HW_INIT(v->pci.init_enable)) {
|
|
Voodoo_Output_Enable(data & 1);
|
|
v->reg[fbiInit0].u = data;
|
|
if (FBIINIT0_GRAPHICS_RESET(data))
|
|
soft_reset(v);
|
|
if (FBIINIT0_FIFO_RESET(data))
|
|
fifo_reset(&v->pci.fifo);
|
|
recompute_video_memory(v);
|
|
}
|
|
break;
|
|
|
|
/* fbiInitX can only be written if initEnable says we can -- Voodoo/Voodoo2 only */
|
|
/* most of these affect memory layout, so always recompute that when done */
|
|
case fbiInit1:
|
|
case fbiInit2:
|
|
case fbiInit4:
|
|
case fbiInit5:
|
|
case fbiInit6:
|
|
case fbiInit7:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
|
|
if (v->type <= VOODOO_2 && (chips & 1) && INITEN_ENABLE_HW_INIT(v->pci.init_enable))
|
|
{
|
|
v->reg[regnum].u = data;
|
|
recompute_video_memory(v);
|
|
v->fbi.video_changed = 1;
|
|
}
|
|
break;
|
|
|
|
case fbiInit3:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (v->type <= VOODOO_2 && (chips & 1) && INITEN_ENABLE_HW_INIT(v->pci.init_enable))
|
|
{
|
|
v->reg[regnum].u = data;
|
|
v->alt_regmap = FBIINIT3_TRI_REGISTER_REMAP(data);
|
|
v->fbi.yorigin = FBIINIT3_YORIGIN_SUBTRACT(v->reg[fbiInit3].u);
|
|
recompute_video_memory(v);
|
|
}
|
|
break;
|
|
|
|
/* nccTable entries are processed and expanded immediately */
|
|
case nccTable+0:
|
|
case nccTable+1:
|
|
case nccTable+2:
|
|
case nccTable+3:
|
|
case nccTable+4:
|
|
case nccTable+5:
|
|
case nccTable+6:
|
|
case nccTable+7:
|
|
case nccTable+8:
|
|
case nccTable+9:
|
|
case nccTable+10:
|
|
case nccTable+11:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (chips & 2) ncc_table_write(&v->tmu[0].ncc[0], regnum - nccTable, data);
|
|
if (chips & 4) ncc_table_write(&v->tmu[1].ncc[0], regnum - nccTable, data);
|
|
break;
|
|
|
|
case nccTable+12:
|
|
case nccTable+13:
|
|
case nccTable+14:
|
|
case nccTable+15:
|
|
case nccTable+16:
|
|
case nccTable+17:
|
|
case nccTable+18:
|
|
case nccTable+19:
|
|
case nccTable+20:
|
|
case nccTable+21:
|
|
case nccTable+22:
|
|
case nccTable+23:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (chips & 2) ncc_table_write(&v->tmu[0].ncc[1], regnum - (nccTable+12), data);
|
|
if (chips & 4) ncc_table_write(&v->tmu[1].ncc[1], regnum - (nccTable+12), data);
|
|
break;
|
|
|
|
/* fogTable entries are processed and expanded immediately */
|
|
case fogTable+0:
|
|
case fogTable+1:
|
|
case fogTable+2:
|
|
case fogTable+3:
|
|
case fogTable+4:
|
|
case fogTable+5:
|
|
case fogTable+6:
|
|
case fogTable+7:
|
|
case fogTable+8:
|
|
case fogTable+9:
|
|
case fogTable+10:
|
|
case fogTable+11:
|
|
case fogTable+12:
|
|
case fogTable+13:
|
|
case fogTable+14:
|
|
case fogTable+15:
|
|
case fogTable+16:
|
|
case fogTable+17:
|
|
case fogTable+18:
|
|
case fogTable+19:
|
|
case fogTable+20:
|
|
case fogTable+21:
|
|
case fogTable+22:
|
|
case fogTable+23:
|
|
case fogTable+24:
|
|
case fogTable+25:
|
|
case fogTable+26:
|
|
case fogTable+27:
|
|
case fogTable+28:
|
|
case fogTable+29:
|
|
case fogTable+30:
|
|
case fogTable+31:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (chips & 1)
|
|
{
|
|
int base = 2 * (regnum - fogTable);
|
|
v->fbi.fogdelta[base + 0] = (data >> 0) & 0xff;
|
|
v->fbi.fogblend[base + 0] = (data >> 8) & 0xff;
|
|
v->fbi.fogdelta[base + 1] = (data >> 16) & 0xff;
|
|
v->fbi.fogblend[base + 1] = (data >> 24) & 0xff;
|
|
}
|
|
break;
|
|
|
|
/* texture modifications cause us to recompute everything */
|
|
case textureMode:
|
|
case tLOD:
|
|
case tDetail:
|
|
case texBaseAddr:
|
|
case texBaseAddr_1:
|
|
case texBaseAddr_2:
|
|
case texBaseAddr_3_8:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
if (chips & 2)
|
|
{
|
|
v->tmu[0].reg[regnum].u = data;
|
|
v->tmu[0].regdirty = 1;
|
|
}
|
|
if (chips & 4)
|
|
{
|
|
v->tmu[1].reg[regnum].u = data;
|
|
v->tmu[1].regdirty = 1;
|
|
}
|
|
break;
|
|
|
|
case trexInit1:
|
|
/* send tmu config data to the frame buffer */
|
|
v->send_config = TREXINIT_SEND_TMU_CONFIG(data);
|
|
goto default_case;
|
|
break;
|
|
|
|
/* these registers are referenced in the renderer; we must wait for pending work before changing */
|
|
case chromaRange:
|
|
case chromaKey:
|
|
case alphaMode:
|
|
case fogColor:
|
|
case stipple:
|
|
case zaColor:
|
|
case color1:
|
|
case color0:
|
|
case clipLowYHighY:
|
|
case clipLeftRight:
|
|
poly_wait(v->poly, v->regnames[regnum]);
|
|
/* fall through to default implementation */
|
|
|
|
/* by default, just feed the data to the chips */
|
|
default:
|
|
default_case:
|
|
if (chips & 1) v->reg[0x000 + regnum].u = data;
|
|
if (chips & 2) v->reg[0x100 + regnum].u = data;
|
|
if (chips & 4) v->reg[0x200 + regnum].u = data;
|
|
if (chips & 8) v->reg[0x300 + regnum].u = data;
|
|
break;
|
|
}
|
|
}
|
|
|
|
Bit32s texture_w(Bit32u offset, Bit32u data)
|
|
{
|
|
int tmunum = (offset >> 19) & 0x03;
|
|
BX_DEBUG(("write TMU%d offset 0x%x value 0x%x", tmunum, offset, data));
|
|
|
|
tmu_state *t;
|
|
|
|
/* statistics */
|
|
v->stats.tex_writes++;
|
|
|
|
/* point to the right TMU */
|
|
if (!(v->chipmask & (2 << tmunum)) || (tmunum >= MAX_TMU))
|
|
return 0;
|
|
t = &v->tmu[tmunum];
|
|
|
|
if (TEXLOD_TDIRECT_WRITE(t->reg[tLOD].u))
|
|
BX_PANIC(("Texture direct write!"));
|
|
|
|
/* wait for any outstanding work to finish */
|
|
poly_wait(v->poly, "Texture write");
|
|
|
|
/* update texture info if dirty */
|
|
if (t->regdirty)
|
|
recompute_texture_params(t);
|
|
|
|
/* swizzle the data */
|
|
if (TEXLOD_TDATA_SWIZZLE(t->reg[tLOD].u))
|
|
data = bx_bswap32(data);
|
|
if (TEXLOD_TDATA_SWAP(t->reg[tLOD].u))
|
|
data = (data >> 16) | (data << 16);
|
|
|
|
/* 8-bit texture case */
|
|
if (TEXMODE_FORMAT(t->reg[textureMode].u) < 8)
|
|
{
|
|
int lod, tt, ts;
|
|
Bit32u tbaseaddr;
|
|
Bit8u *dest;
|
|
|
|
/* extract info */
|
|
if (v->type <= VOODOO_2)
|
|
{
|
|
lod = (offset >> 15) & 0x0f;
|
|
tt = (offset >> 7) & 0xff;
|
|
|
|
/* old code has a bit about how this is broken in gauntleg unless we always look at TMU0 */
|
|
if (TEXMODE_SEQ_8_DOWNLD(v->tmu[0].reg/*t->reg*/[textureMode].u))
|
|
ts = (offset << 2) & 0xfc;
|
|
else
|
|
ts = (offset << 1) & 0xfc;
|
|
|
|
/* validate parameters */
|
|
if (lod > 8)
|
|
return 0;
|
|
|
|
/* compute the base address */
|
|
tbaseaddr = t->lodoffset[lod];
|
|
tbaseaddr += tt * ((t->wmask >> lod) + 1) + ts;
|
|
|
|
if (LOG_TEXTURE_RAM) BX_DEBUG(("Texture 8-bit w: lod=%d s=%d t=%d data=0x%08x", lod, ts, tt, data));
|
|
}
|
|
else
|
|
{
|
|
tbaseaddr = t->lodoffset[0] + offset*4;
|
|
|
|
if (LOG_TEXTURE_RAM) BX_DEBUG(("Texture 16-bit w: offset=0x%x data=0x%08x", offset*4, data));
|
|
}
|
|
|
|
/* write the four bytes in little-endian order */
|
|
dest = t->ram;
|
|
tbaseaddr &= t->mask;
|
|
dest[BYTE4_XOR_LE(tbaseaddr + 0)] = (data >> 0) & 0xff;
|
|
dest[BYTE4_XOR_LE(tbaseaddr + 1)] = (data >> 8) & 0xff;
|
|
dest[BYTE4_XOR_LE(tbaseaddr + 2)] = (data >> 16) & 0xff;
|
|
dest[BYTE4_XOR_LE(tbaseaddr + 3)] = (data >> 24) & 0xff;
|
|
}
|
|
|
|
/* 16-bit texture case */
|
|
else
|
|
{
|
|
int lod, tt, ts;
|
|
Bit32u tbaseaddr;
|
|
Bit16u *dest;
|
|
|
|
/* extract info */
|
|
if (v->type <= VOODOO_2)
|
|
{
|
|
tmunum = (offset >> 19) & 0x03;
|
|
lod = (offset >> 15) & 0x0f;
|
|
tt = (offset >> 7) & 0xff;
|
|
ts = (offset << 1) & 0xfe;
|
|
|
|
/* validate parameters */
|
|
if (lod > 8)
|
|
return 0;
|
|
|
|
/* compute the base address */
|
|
tbaseaddr = t->lodoffset[lod];
|
|
tbaseaddr += 2 * (tt * ((t->wmask >> lod) + 1) + ts);
|
|
|
|
if (LOG_TEXTURE_RAM) BX_DEBUG(("Texture 16-bit w: lod=%d s=%d t=%d data=%08X", lod, ts, tt, data));
|
|
}
|
|
else
|
|
{
|
|
tbaseaddr = t->lodoffset[0] + offset*4;
|
|
|
|
if (LOG_TEXTURE_RAM) BX_DEBUG(("Texture 16-bit w: offset=0x%x data=0x%08x", offset*4, data));
|
|
}
|
|
|
|
/* write the two words in little-endian order */
|
|
dest = (Bit16u *)t->ram;
|
|
tbaseaddr &= t->mask;
|
|
tbaseaddr >>= 1;
|
|
dest[BYTE_XOR_LE(tbaseaddr + 0)] = (data >> 0) & 0xffff;
|
|
dest[BYTE_XOR_LE(tbaseaddr + 1)] = (data >> 16) & 0xffff;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
Bit32u lfb_w(Bit32u offset, Bit32u data, Bit32u mem_mask)
|
|
{
|
|
Bit16u *dest, *depth;
|
|
Bit32u destmax, depthmax;
|
|
// Bit32u mem_mask=0xffffffff;
|
|
Bit32u forcefront=0;
|
|
|
|
int sr[2], sg[2], sb[2], sa[2], sw[2];
|
|
int x, y, scry, mask;
|
|
int pix, destbuf;
|
|
|
|
BX_DEBUG(("write LFB offset 0x%x value 0x%08x", offset, data));
|
|
|
|
/* statistics */
|
|
v->stats.lfb_writes++;
|
|
|
|
/* byte swizzling */
|
|
if (LFBMODE_BYTE_SWIZZLE_WRITES(v->reg[lfbMode].u))
|
|
{
|
|
data = bx_bswap32(data);
|
|
mem_mask = bx_bswap32(mem_mask);
|
|
}
|
|
|
|
/* word swapping */
|
|
if (LFBMODE_WORD_SWAP_WRITES(v->reg[lfbMode].u))
|
|
{
|
|
data = (data << 16) | (data >> 16);
|
|
mem_mask = (mem_mask << 16) | (mem_mask >> 16);
|
|
}
|
|
|
|
/* extract default depth and alpha values */
|
|
sw[0] = sw[1] = v->reg[zaColor].u & 0xffff;
|
|
sa[0] = sa[1] = v->reg[zaColor].u >> 24;
|
|
|
|
/* first extract A,R,G,B from the data */
|
|
switch (LFBMODE_WRITE_FORMAT(v->reg[lfbMode].u) + 16 * LFBMODE_RGBA_LANES(v->reg[lfbMode].u))
|
|
{
|
|
case 16*0 + 0: /* ARGB, 16-bit RGB 5-6-5 */
|
|
case 16*2 + 0: /* RGBA, 16-bit RGB 5-6-5 */
|
|
EXTRACT_565_TO_888(data, sr[0], sg[0], sb[0]);
|
|
EXTRACT_565_TO_888(data >> 16, sr[1], sg[1], sb[1]);
|
|
mask = LFB_RGB_PRESENT | (LFB_RGB_PRESENT << 4);
|
|
offset <<= 1;
|
|
break;
|
|
case 16*1 + 0: /* ABGR, 16-bit RGB 5-6-5 */
|
|
case 16*3 + 0: /* BGRA, 16-bit RGB 5-6-5 */
|
|
EXTRACT_565_TO_888(data, sb[0], sg[0], sr[0]);
|
|
EXTRACT_565_TO_888(data >> 16, sb[1], sg[1], sr[1]);
|
|
mask = LFB_RGB_PRESENT | (LFB_RGB_PRESENT << 4);
|
|
offset <<= 1;
|
|
break;
|
|
|
|
case 16*0 + 1: /* ARGB, 16-bit RGB x-5-5-5 */
|
|
EXTRACT_x555_TO_888(data, sr[0], sg[0], sb[0]);
|
|
EXTRACT_x555_TO_888(data >> 16, sr[1], sg[1], sb[1]);
|
|
mask = LFB_RGB_PRESENT | (LFB_RGB_PRESENT << 4);
|
|
offset <<= 1;
|
|
break;
|
|
case 16*1 + 1: /* ABGR, 16-bit RGB x-5-5-5 */
|
|
EXTRACT_x555_TO_888(data, sb[0], sg[0], sr[0]);
|
|
EXTRACT_x555_TO_888(data >> 16, sb[1], sg[1], sr[1]);
|
|
mask = LFB_RGB_PRESENT | (LFB_RGB_PRESENT << 4);
|
|
offset <<= 1;
|
|
break;
|
|
case 16*2 + 1: /* RGBA, 16-bit RGB x-5-5-5 */
|
|
EXTRACT_555x_TO_888(data, sr[0], sg[0], sb[0]);
|
|
EXTRACT_555x_TO_888(data >> 16, sr[1], sg[1], sb[1]);
|
|
mask = LFB_RGB_PRESENT | (LFB_RGB_PRESENT << 4);
|
|
offset <<= 1;
|
|
break;
|
|
case 16*3 + 1: /* BGRA, 16-bit RGB x-5-5-5 */
|
|
EXTRACT_555x_TO_888(data, sb[0], sg[0], sr[0]);
|
|
EXTRACT_555x_TO_888(data >> 16, sb[1], sg[1], sr[1]);
|
|
mask = LFB_RGB_PRESENT | (LFB_RGB_PRESENT << 4);
|
|
offset <<= 1;
|
|
break;
|
|
|
|
case 16*0 + 2: /* ARGB, 16-bit ARGB 1-5-5-5 */
|
|
EXTRACT_1555_TO_8888(data, sa[0], sr[0], sg[0], sb[0]);
|
|
EXTRACT_1555_TO_8888(data >> 16, sa[1], sr[1], sg[1], sb[1]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT | ((LFB_RGB_PRESENT | LFB_ALPHA_PRESENT) << 4);
|
|
offset <<= 1;
|
|
break;
|
|
case 16*1 + 2: /* ABGR, 16-bit ARGB 1-5-5-5 */
|
|
EXTRACT_1555_TO_8888(data, sa[0], sb[0], sg[0], sr[0]);
|
|
EXTRACT_1555_TO_8888(data >> 16, sa[1], sb[1], sg[1], sr[1]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT | ((LFB_RGB_PRESENT | LFB_ALPHA_PRESENT) << 4);
|
|
offset <<= 1;
|
|
break;
|
|
case 16*2 + 2: /* RGBA, 16-bit ARGB 1-5-5-5 */
|
|
EXTRACT_5551_TO_8888(data, sr[0], sg[0], sb[0], sa[0]);
|
|
EXTRACT_5551_TO_8888(data >> 16, sr[1], sg[1], sb[1], sa[1]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT | ((LFB_RGB_PRESENT | LFB_ALPHA_PRESENT) << 4);
|
|
offset <<= 1;
|
|
break;
|
|
case 16*3 + 2: /* BGRA, 16-bit ARGB 1-5-5-5 */
|
|
EXTRACT_5551_TO_8888(data, sb[0], sg[0], sr[0], sa[0]);
|
|
EXTRACT_5551_TO_8888(data >> 16, sb[1], sg[1], sr[1], sa[1]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT | ((LFB_RGB_PRESENT | LFB_ALPHA_PRESENT) << 4);
|
|
offset <<= 1;
|
|
break;
|
|
|
|
case 16*0 + 4: /* ARGB, 32-bit RGB x-8-8-8 */
|
|
EXTRACT_x888_TO_888(data, sr[0], sg[0], sb[0]);
|
|
mask = LFB_RGB_PRESENT;
|
|
break;
|
|
case 16*1 + 4: /* ABGR, 32-bit RGB x-8-8-8 */
|
|
EXTRACT_x888_TO_888(data, sb[0], sg[0], sr[0]);
|
|
mask = LFB_RGB_PRESENT;
|
|
break;
|
|
case 16*2 + 4: /* RGBA, 32-bit RGB x-8-8-8 */
|
|
EXTRACT_888x_TO_888(data, sr[0], sg[0], sb[0]);
|
|
mask = LFB_RGB_PRESENT;
|
|
break;
|
|
case 16*3 + 4: /* BGRA, 32-bit RGB x-8-8-8 */
|
|
EXTRACT_888x_TO_888(data, sb[0], sg[0], sr[0]);
|
|
mask = LFB_RGB_PRESENT;
|
|
break;
|
|
|
|
case 16*0 + 5: /* ARGB, 32-bit ARGB 8-8-8-8 */
|
|
EXTRACT_8888_TO_8888(data, sa[0], sr[0], sg[0], sb[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT;
|
|
break;
|
|
case 16*1 + 5: /* ABGR, 32-bit ARGB 8-8-8-8 */
|
|
EXTRACT_8888_TO_8888(data, sa[0], sb[0], sg[0], sr[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT;
|
|
break;
|
|
case 16*2 + 5: /* RGBA, 32-bit ARGB 8-8-8-8 */
|
|
EXTRACT_8888_TO_8888(data, sr[0], sg[0], sb[0], sa[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT;
|
|
break;
|
|
case 16*3 + 5: /* BGRA, 32-bit ARGB 8-8-8-8 */
|
|
EXTRACT_8888_TO_8888(data, sb[0], sg[0], sr[0], sa[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT;
|
|
break;
|
|
|
|
case 16*0 + 12: /* ARGB, 32-bit depth+RGB 5-6-5 */
|
|
case 16*2 + 12: /* RGBA, 32-bit depth+RGB 5-6-5 */
|
|
sw[0] = data >> 16;
|
|
EXTRACT_565_TO_888(data, sr[0], sg[0], sb[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_DEPTH_PRESENT_MSW;
|
|
break;
|
|
case 16*1 + 12: /* ABGR, 32-bit depth+RGB 5-6-5 */
|
|
case 16*3 + 12: /* BGRA, 32-bit depth+RGB 5-6-5 */
|
|
sw[0] = data >> 16;
|
|
EXTRACT_565_TO_888(data, sb[0], sg[0], sr[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_DEPTH_PRESENT_MSW;
|
|
break;
|
|
|
|
case 16*0 + 13: /* ARGB, 32-bit depth+RGB x-5-5-5 */
|
|
sw[0] = data >> 16;
|
|
EXTRACT_x555_TO_888(data, sr[0], sg[0], sb[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_DEPTH_PRESENT_MSW;
|
|
break;
|
|
case 16*1 + 13: /* ABGR, 32-bit depth+RGB x-5-5-5 */
|
|
sw[0] = data >> 16;
|
|
EXTRACT_x555_TO_888(data, sb[0], sg[0], sr[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_DEPTH_PRESENT_MSW;
|
|
break;
|
|
case 16*2 + 13: /* RGBA, 32-bit depth+RGB x-5-5-5 */
|
|
sw[0] = data >> 16;
|
|
EXTRACT_555x_TO_888(data, sr[0], sg[0], sb[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_DEPTH_PRESENT_MSW;
|
|
break;
|
|
case 16*3 + 13: /* BGRA, 32-bit depth+RGB x-5-5-5 */
|
|
sw[0] = data >> 16;
|
|
EXTRACT_555x_TO_888(data, sb[0], sg[0], sr[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_DEPTH_PRESENT_MSW;
|
|
break;
|
|
|
|
case 16*0 + 14: /* ARGB, 32-bit depth+ARGB 1-5-5-5 */
|
|
sw[0] = data >> 16;
|
|
EXTRACT_1555_TO_8888(data, sa[0], sr[0], sg[0], sb[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT | LFB_DEPTH_PRESENT_MSW;
|
|
break;
|
|
case 16*1 + 14: /* ABGR, 32-bit depth+ARGB 1-5-5-5 */
|
|
sw[0] = data >> 16;
|
|
EXTRACT_1555_TO_8888(data, sa[0], sb[0], sg[0], sr[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT | LFB_DEPTH_PRESENT_MSW;
|
|
break;
|
|
case 16*2 + 14: /* RGBA, 32-bit depth+ARGB 1-5-5-5 */
|
|
sw[0] = data >> 16;
|
|
EXTRACT_5551_TO_8888(data, sr[0], sg[0], sb[0], sa[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT | LFB_DEPTH_PRESENT_MSW;
|
|
break;
|
|
case 16*3 + 14: /* BGRA, 32-bit depth+ARGB 1-5-5-5 */
|
|
sw[0] = data >> 16;
|
|
EXTRACT_5551_TO_8888(data, sb[0], sg[0], sr[0], sa[0]);
|
|
mask = LFB_RGB_PRESENT | LFB_ALPHA_PRESENT | LFB_DEPTH_PRESENT_MSW;
|
|
break;
|
|
|
|
case 16*0 + 15: /* ARGB, 16-bit depth */
|
|
case 16*1 + 15: /* ARGB, 16-bit depth */
|
|
case 16*2 + 15: /* ARGB, 16-bit depth */
|
|
case 16*3 + 15: /* ARGB, 16-bit depth */
|
|
sw[0] = data & 0xffff;
|
|
sw[1] = data >> 16;
|
|
mask = LFB_DEPTH_PRESENT | (LFB_DEPTH_PRESENT << 4);
|
|
offset <<= 1;
|
|
break;
|
|
|
|
default: /* reserved */
|
|
return 0;
|
|
}
|
|
|
|
/* compute X,Y */
|
|
x = (offset << 0) & ((1 << v->fbi.lfb_stride) - 1);
|
|
y = (offset >> v->fbi.lfb_stride) & 0x7ff;
|
|
|
|
/* adjust the mask based on which half of the data is written */
|
|
if (!ACCESSING_BITS_0_15)
|
|
mask &= ~(0x0f - LFB_DEPTH_PRESENT_MSW);
|
|
if (!ACCESSING_BITS_16_31)
|
|
mask &= ~(0xf0 + LFB_DEPTH_PRESENT_MSW);
|
|
|
|
/* select the target buffer */
|
|
destbuf = (v->type >= VOODOO_BANSHEE) ? (!forcefront) : LFBMODE_WRITE_BUFFER_SELECT(v->reg[lfbMode].u);
|
|
// BX_DEBUG(("destbuf %X lfbmode %X",destbuf, v->reg[lfbMode].u));
|
|
switch (destbuf)
|
|
{
|
|
case 0: /* front buffer */
|
|
dest = (Bit16u *)(v->fbi.ram + v->fbi.rgboffs[v->fbi.frontbuf]);
|
|
destmax = (v->fbi.mask + 1 - v->fbi.rgboffs[v->fbi.frontbuf]) / 2;
|
|
v->fbi.video_changed = 1;
|
|
break;
|
|
|
|
case 1: /* back buffer */
|
|
dest = (Bit16u *)(v->fbi.ram + v->fbi.rgboffs[v->fbi.backbuf]);
|
|
destmax = (v->fbi.mask + 1 - v->fbi.rgboffs[v->fbi.backbuf]) / 2;
|
|
break;
|
|
|
|
default: /* reserved */
|
|
return 0;
|
|
}
|
|
depth = (Bit16u *)(v->fbi.ram + v->fbi.auxoffs);
|
|
depthmax = (v->fbi.mask + 1 - v->fbi.auxoffs) / 2;
|
|
|
|
/* wait for any outstanding work to finish */
|
|
poly_wait(v->poly, "LFB Write");
|
|
|
|
/* simple case: no pipeline */
|
|
if (!LFBMODE_ENABLE_PIXEL_PIPELINE(v->reg[lfbMode].u))
|
|
{
|
|
DECLARE_DITHER_POINTERS;
|
|
UNUSED(dither);
|
|
Bit32u bufoffs;
|
|
|
|
if (LOG_LFB) BX_DEBUG(("VOODOO.%d.LFB:write raw mode %X (%d,%d) = %08X & %08X", v->index, LFBMODE_WRITE_FORMAT(v->reg[lfbMode].u), x, y, data, mem_mask));
|
|
|
|
/* determine the screen Y */
|
|
scry = y;
|
|
if (LFBMODE_Y_ORIGIN(v->reg[lfbMode].u))
|
|
scry = (v->fbi.yorigin - y) & 0x3ff;
|
|
|
|
/* advance pointers to the proper row */
|
|
bufoffs = scry * v->fbi.rowpixels + x;
|
|
|
|
/* compute dithering */
|
|
COMPUTE_DITHER_POINTERS(v->reg[fbzMode].u, y);
|
|
|
|
/* loop over up to two pixels */
|
|
for (pix = 0; mask; pix++)
|
|
{
|
|
/* make sure we care about this pixel */
|
|
if (mask & 0x0f)
|
|
{
|
|
/* write to the RGB buffer */
|
|
if ((mask & LFB_RGB_PRESENT) && bufoffs < destmax)
|
|
{
|
|
/* apply dithering and write to the screen */
|
|
APPLY_DITHER(v->reg[fbzMode].u, x, dither_lookup, sr[pix], sg[pix], sb[pix]);
|
|
dest[bufoffs] = (sr[pix] << 11) | (sg[pix] << 5) | sb[pix];
|
|
}
|
|
|
|
/* make sure we have an aux buffer to write to */
|
|
if (depth && bufoffs < depthmax)
|
|
{
|
|
/* write to the alpha buffer */
|
|
if ((mask & LFB_ALPHA_PRESENT) && FBZMODE_ENABLE_ALPHA_PLANES(v->reg[fbzMode].u))
|
|
depth[bufoffs] = sa[pix];
|
|
|
|
/* write to the depth buffer */
|
|
if ((mask & (LFB_DEPTH_PRESENT | LFB_DEPTH_PRESENT_MSW)) && !FBZMODE_ENABLE_ALPHA_PLANES(v->reg[fbzMode].u))
|
|
depth[bufoffs] = sw[pix];
|
|
}
|
|
|
|
/* track pixel writes to the frame buffer regardless of mask */
|
|
v->reg[fbiPixelsOut].u++;
|
|
}
|
|
|
|
/* advance our pointers */
|
|
bufoffs++;
|
|
x++;
|
|
mask >>= 4;
|
|
}
|
|
}
|
|
/* tricky case: run the full pixel pipeline on the pixel */
|
|
else
|
|
{
|
|
DECLARE_DITHER_POINTERS;
|
|
|
|
if (LOG_LFB) BX_DEBUG(("VOODOO.%d.LFB:write pipelined mode %X (%d,%d) = %08X & %08X", v->index, LFBMODE_WRITE_FORMAT(v->reg[lfbMode].u), x, y, data, mem_mask));
|
|
|
|
/* determine the screen Y */
|
|
scry = y;
|
|
if (FBZMODE_Y_ORIGIN(v->reg[fbzMode].u))
|
|
scry = (v->fbi.yorigin - y) & 0x3ff;
|
|
|
|
/* advance pointers to the proper row */
|
|
dest += scry * v->fbi.rowpixels;
|
|
if (depth)
|
|
depth += scry * v->fbi.rowpixels;
|
|
|
|
/* compute dithering */
|
|
COMPUTE_DITHER_POINTERS(v->reg[fbzMode].u, y);
|
|
|
|
/* loop over up to two pixels */
|
|
for (pix = 0; mask; pix++)
|
|
{
|
|
/* make sure we care about this pixel */
|
|
if (mask & 0x0f)
|
|
{
|
|
stats_block *stats = &v->fbi.lfb_stats;
|
|
Bit64s iterw = sw[pix] << (30-16);
|
|
Bit32s iterz = sw[pix] << 12;
|
|
rgb_union color;
|
|
|
|
/* apply clipping */
|
|
if (FBZMODE_ENABLE_CLIPPING(v->reg[fbzMode].u))
|
|
{
|
|
if (x < (int)((v->reg[clipLeftRight].u >> 16) & 0x3ff) ||
|
|
x >= (int)(v->reg[clipLeftRight].u & 0x3ff) ||
|
|
scry < (int)((v->reg[clipLowYHighY].u >> 16) & 0x3ff) ||
|
|
scry >= (int)(v->reg[clipLowYHighY].u & 0x3ff))
|
|
{
|
|
stats->pixels_in++;
|
|
stats->clip_fail++;
|
|
goto nextpixel;
|
|
}
|
|
}
|
|
|
|
/* pixel pipeline part 1 handles depth testing and stippling */
|
|
PIXEL_PIPELINE_BEGIN(v, stats, x, y, v->reg[fbzColorPath].u, v->reg[fbzMode].u, iterz, iterw);
|
|
|
|
/* use the RGBA we stashed above */
|
|
color.rgb.r = r = sr[pix];
|
|
color.rgb.g = g = sg[pix];
|
|
color.rgb.b = b = sb[pix];
|
|
color.rgb.a = a = sa[pix];
|
|
|
|
/* apply chroma key, alpha mask, and alpha testing */
|
|
APPLY_CHROMAKEY(v, stats, v->reg[fbzMode].u, color);
|
|
APPLY_ALPHAMASK(v, stats, v->reg[fbzMode].u, color.rgb.a);
|
|
APPLY_ALPHATEST(v, stats, v->reg[alphaMode].u, color.rgb.a);
|
|
|
|
/* pixel pipeline part 2 handles color combine, fog, alpha, and final output */
|
|
PIXEL_PIPELINE_END(v, stats, dither, dither4, dither_lookup, x, dest, depth, v->reg[fbzMode].u, v->reg[fbzColorPath].u, v->reg[alphaMode].u, v->reg[fogMode].u, iterz, iterw, v->reg[zaColor]);
|
|
}
|
|
nextpixel:
|
|
/* advance our pointers */
|
|
x++;
|
|
mask >>= 4;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
Bit32u register_r(Bit32u offset)
|
|
{
|
|
Bit32u regnum = (offset) & 0xff;
|
|
Bit32u chips = (offset>>8) & 0xf;
|
|
|
|
if (!((voodoo_last_msg == regnum) && (regnum == status))) //show status reg only once
|
|
BX_DEBUG(("read chip 0x%x reg 0x%x (%s)", chips, regnum<<2, voodoo_reg_name[regnum]));
|
|
voodoo_last_msg = regnum;
|
|
|
|
/* first make sure this register is readable */
|
|
if (!(v->regaccess[regnum] & REGISTER_READ)) {
|
|
BX_ERROR(("Invalid attempt to read %s", v->regnames[regnum]));
|
|
return 0;
|
|
}
|
|
|
|
Bit32u result;
|
|
|
|
/* default result is the FBI register value */
|
|
result = v->reg[regnum].u;
|
|
|
|
/* some registers are dynamic; compute them */
|
|
switch (regnum) {
|
|
case status:
|
|
|
|
/* start with a blank slate */
|
|
result = 0;
|
|
|
|
/* bits 5:0 are the PCI FIFO free space */
|
|
if (fifo_empty(&v->pci.fifo))
|
|
result |= 0x3f << 0;
|
|
else
|
|
{
|
|
int temp = fifo_space(&v->pci.fifo)/2;
|
|
if (temp > 0x3f)
|
|
temp = 0x3f;
|
|
result |= temp << 0;
|
|
}
|
|
|
|
/* bit 6 is the vertical retrace */
|
|
result |= (Voodoo_get_retrace() > 0) << 6;
|
|
|
|
/* bit 7 is FBI graphics engine busy */
|
|
if (v->pci.op_pending)
|
|
result |= 1 << 7;
|
|
|
|
/* bit 8 is TREX busy */
|
|
if (v->pci.op_pending)
|
|
result |= 1 << 8;
|
|
|
|
/* bit 9 is overall busy */
|
|
if (v->pci.op_pending)
|
|
result |= 1 << 9;
|
|
|
|
/* Banshee is different starting here */
|
|
if (v->type < VOODOO_BANSHEE)
|
|
{
|
|
/* bits 11:10 specifies which buffer is visible */
|
|
result |= v->fbi.frontbuf << 10;
|
|
|
|
/* bits 27:12 indicate memory FIFO freespace */
|
|
if (!FBIINIT0_ENABLE_MEMORY_FIFO(v->reg[fbiInit0].u) || fifo_empty(&v->fbi.fifo))
|
|
result |= 0xffff << 12;
|
|
else
|
|
{
|
|
int temp = fifo_space(&v->fbi.fifo)/2;
|
|
if (temp > 0xffff)
|
|
temp = 0xffff;
|
|
result |= temp << 12;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* bit 10 is 2D busy */
|
|
|
|
/* bit 11 is cmd FIFO 0 busy */
|
|
if (v->fbi.cmdfifo[0].enable && v->fbi.cmdfifo[0].depth > 0)
|
|
result |= 1 << 11;
|
|
|
|
/* bit 12 is cmd FIFO 1 busy */
|
|
if (v->fbi.cmdfifo[1].enable && v->fbi.cmdfifo[1].depth > 0)
|
|
result |= 1 << 12;
|
|
}
|
|
|
|
/* bits 30:28 are the number of pending swaps */
|
|
if (v->fbi.swaps_pending > 7)
|
|
result |= 7 << 28;
|
|
else
|
|
result |= v->fbi.swaps_pending << 28;
|
|
|
|
/* bit 31 is not used */
|
|
|
|
/* eat some cycles since people like polling here */
|
|
cpu_eat_cycles(v->cpu, 1000);
|
|
break;
|
|
|
|
/* bit 2 of the initEnable register maps this to dacRead */
|
|
case fbiInit2:
|
|
if (INITEN_REMAP_INIT_TO_DAC(v->pci.init_enable))
|
|
result = v->dac.read_result;
|
|
break;
|
|
|
|
case vRetrace:
|
|
result = Voodoo_get_retrace() & 0x1fff;
|
|
break;
|
|
|
|
case hvRetrace:
|
|
result = Voodoo_get_retrace(); // TODO: hRetrace
|
|
break;
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
Bit32u lfb_r(Bit32u offset)
|
|
{
|
|
Bit16u *buffer;
|
|
Bit32u bufmax;
|
|
Bit32u bufoffs;
|
|
Bit32u data;
|
|
bool forcefront=false;
|
|
int x, y, scry;
|
|
Bit32u destbuf;
|
|
|
|
BX_DEBUG(("read LFB offset 0x%x", offset));
|
|
|
|
/* statistics */
|
|
v->stats.lfb_reads++;
|
|
|
|
/* compute X,Y */
|
|
x = (offset << 1) & 0x3fe;
|
|
y = (offset >> 9) & 0x7ff;
|
|
|
|
/* select the target buffer */
|
|
destbuf = (v->type >= VOODOO_BANSHEE) ? (!forcefront) : LFBMODE_READ_BUFFER_SELECT(v->reg[lfbMode].u);
|
|
// BX_DEBUG(("destbuf %X lfbmode %X",destbuf, v->reg[lfbMode].u));
|
|
switch (destbuf)
|
|
{
|
|
case 0: /* front buffer */
|
|
buffer = (Bit16u *)(v->fbi.ram + v->fbi.rgboffs[v->fbi.frontbuf]);
|
|
bufmax = (v->fbi.mask + 1 - v->fbi.rgboffs[v->fbi.frontbuf]) / 2;
|
|
break;
|
|
|
|
case 1: /* back buffer */
|
|
buffer = (Bit16u *)(v->fbi.ram + v->fbi.rgboffs[v->fbi.backbuf]);
|
|
bufmax = (v->fbi.mask + 1 - v->fbi.rgboffs[v->fbi.backbuf]) / 2;
|
|
break;
|
|
|
|
case 2: /* aux buffer */
|
|
if (v->fbi.auxoffs == (Bit32u)~0)
|
|
return 0xffffffff;
|
|
buffer = (Bit16u *)(v->fbi.ram + v->fbi.auxoffs);
|
|
bufmax = (v->fbi.mask + 1 - v->fbi.auxoffs) / 2;
|
|
break;
|
|
|
|
default: /* reserved */
|
|
return 0xffffffff;
|
|
}
|
|
|
|
/* determine the screen Y */
|
|
scry = y;
|
|
if (LFBMODE_Y_ORIGIN(v->reg[lfbMode].u))
|
|
scry = (v->fbi.yorigin - y) & 0x3ff;
|
|
|
|
/* advance pointers to the proper row */
|
|
bufoffs = scry * v->fbi.rowpixels + x;
|
|
if (bufoffs >= bufmax)
|
|
return 0xffffffff;
|
|
|
|
/* wait for any outstanding work to finish */
|
|
poly_wait(v->poly, "LFB read");
|
|
|
|
/* compute the data */
|
|
data = buffer[bufoffs + 0] | (buffer[bufoffs + 1] << 16);
|
|
|
|
/* word swapping */
|
|
if (LFBMODE_WORD_SWAP_READS(v->reg[lfbMode].u))
|
|
data = (data << 16) | (data >> 16);
|
|
|
|
/* byte swizzling */
|
|
if (LFBMODE_BYTE_SWIZZLE_READS(v->reg[lfbMode].u))
|
|
data = bx_bswap32(data);
|
|
|
|
if (LOG_LFB) BX_DEBUG(("VOODOO.%d.LFB:read (%d,%d) = %08X", v->index, x, y, data));
|
|
return data;
|
|
}
|
|
|
|
void voodoo_w(Bit32u offset, Bit32u data, Bit32u mask) {
|
|
|
|
if ((offset & (0xc00000/4)) == 0)
|
|
register_w(offset, data);
|
|
else if (offset & (0x800000/4))
|
|
texture_w(offset, data);
|
|
else
|
|
lfb_w(offset, data, mask);
|
|
}
|
|
|
|
Bit32u voodoo_r(Bit32u offset) {
|
|
|
|
if (!(offset & (0xc00000/4)))
|
|
return register_r(offset);
|
|
else
|
|
return lfb_r(offset);
|
|
|
|
return 0xffffffff;
|
|
}
|
|
|
|
void init_tmu(voodoo_state *v, tmu_state *t, voodoo_reg *reg, void *memory, int tmem)
|
|
{
|
|
/* allocate texture RAM */
|
|
t->ram = (Bit8u *)memory;
|
|
t->mask = tmem - 1;
|
|
t->reg = reg;
|
|
t->regdirty = 1;
|
|
t->bilinear_mask = (v->type >= VOODOO_2) ? 0xff : 0xf0;
|
|
|
|
/* mark the NCC tables dirty and configure their registers */
|
|
t->ncc[0].dirty = t->ncc[1].dirty = 1;
|
|
t->ncc[0].reg = &t->reg[nccTable+0];
|
|
t->ncc[1].reg = &t->reg[nccTable+12];
|
|
|
|
/* create pointers to all the tables */
|
|
t->texel[0] = v->tmushare.rgb332;
|
|
t->texel[1] = t->ncc[0].texel;
|
|
t->texel[2] = v->tmushare.alpha8;
|
|
t->texel[3] = v->tmushare.int8;
|
|
t->texel[4] = v->tmushare.ai44;
|
|
t->texel[5] = t->palette;
|
|
t->texel[6] = (v->type >= VOODOO_2) ? t->palettea : NULL;
|
|
t->texel[7] = NULL;
|
|
t->texel[8] = v->tmushare.rgb332;
|
|
t->texel[9] = t->ncc[0].texel;
|
|
t->texel[10] = v->tmushare.rgb565;
|
|
t->texel[11] = v->tmushare.argb1555;
|
|
t->texel[12] = v->tmushare.argb4444;
|
|
t->texel[13] = v->tmushare.int8;
|
|
t->texel[14] = t->palette;
|
|
t->texel[15] = NULL;
|
|
t->lookup = t->texel[0];
|
|
|
|
/* attach the palette to NCC table 0 */
|
|
t->ncc[0].palette = t->palette;
|
|
if (v->type >= VOODOO_2)
|
|
t->ncc[0].palettea = t->palettea;
|
|
|
|
/* set up texture address calculations */
|
|
if (v->type <= VOODOO_2)
|
|
{
|
|
t->texaddr_mask = 0x0fffff;
|
|
t->texaddr_shift = 3;
|
|
} else {
|
|
t->texaddr_mask = 0xfffff0;
|
|
t->texaddr_shift = 0;
|
|
}
|
|
}
|
|
|
|
void init_tmu_shared(tmu_shared_state *s)
|
|
{
|
|
int val;
|
|
|
|
/* build static 8-bit texel tables */
|
|
for (val = 0; val < 256; val++) {
|
|
int r, g, b, a;
|
|
|
|
/* 8-bit RGB (3-3-2) */
|
|
EXTRACT_332_TO_888(val, r, g, b);
|
|
s->rgb332[val] = MAKE_ARGB(0xff, r, g, b);
|
|
|
|
/* 8-bit alpha */
|
|
s->alpha8[val] = MAKE_ARGB(val, val, val, val);
|
|
|
|
/* 8-bit intensity */
|
|
s->int8[val] = MAKE_ARGB(0xff, val, val, val);
|
|
|
|
/* 8-bit alpha, intensity */
|
|
a = ((val >> 0) & 0xf0) | ((val >> 4) & 0x0f);
|
|
r = ((val << 4) & 0xf0) | ((val << 0) & 0x0f);
|
|
s->ai44[val] = MAKE_ARGB(a, r, r, r);
|
|
}
|
|
|
|
/* build static 16-bit texel tables */
|
|
for (val = 0; val < 65536; val++) {
|
|
int r, g, b, a;
|
|
|
|
/* table 10 = 16-bit RGB (5-6-5) */
|
|
EXTRACT_565_TO_888(val, r, g, b);
|
|
s->rgb565[val] = MAKE_ARGB(0xff, r, g, b);
|
|
|
|
/* table 11 = 16 ARGB (1-5-5-5) */
|
|
EXTRACT_1555_TO_8888(val, a, r, g, b);
|
|
s->argb1555[val] = MAKE_ARGB(a, r, g, b);
|
|
|
|
/* table 12 = 16-bit ARGB (4-4-4-4) */
|
|
EXTRACT_4444_TO_8888(val, a, r, g, b);
|
|
s->argb4444[val] = MAKE_ARGB(a, r, g, b);
|
|
}
|
|
}
|
|
|
|
void voodoo_init(Bit8u _type)
|
|
{
|
|
int pen;
|
|
int val;
|
|
const raster_info *info;
|
|
|
|
v->reg[lfbMode].u = 0;
|
|
v->reg[fbiInit0].u = (1 << 4) | (0x10 << 6);
|
|
v->reg[fbiInit1].u = (1 << 1) | (1 << 8) | (1 << 12) | (2 << 20);
|
|
v->reg[fbiInit2].u = (1 << 6) | (0x100 << 23);
|
|
v->reg[fbiInit3].u = (2 << 13) | (0xf << 17);
|
|
v->reg[fbiInit4].u = (1 << 0);
|
|
v->alt_regmap = 0;
|
|
v->fbi.lfb_stride = 10;
|
|
v->type = _type;
|
|
if (v->type == VOODOO_2) {
|
|
v->regaccess = voodoo2_register_access;
|
|
} else {
|
|
v->regaccess = voodoo_register_access;
|
|
}
|
|
v->regnames = voodoo_reg_name;
|
|
v->chipmask = 0x01 | 0x02 | 0x04 | 0x08;
|
|
memset(v->dac.reg, 0, sizeof(v->dac.reg));
|
|
v->dac.read_result = 0;
|
|
v->dac.clk0_m = 0x37;
|
|
v->dac.clk0_n = 0x02;
|
|
v->dac.clk0_p = 0x03;
|
|
|
|
/* create a table of precomputed 1/n and log2(n) values */
|
|
/* n ranges from 1.0000 to 2.0000 */
|
|
for (val = 0; val <= (1 << RECIPLOG_LOOKUP_BITS); val++) {
|
|
Bit32u value = (1 << RECIPLOG_LOOKUP_BITS) + val;
|
|
voodoo_reciplog[val*2 + 0] = (1 << (RECIPLOG_LOOKUP_PREC + RECIPLOG_LOOKUP_BITS)) / value;
|
|
voodoo_reciplog[val*2 + 1] = (Bit32u)(LOGB2((double)value / (double)(1 << RECIPLOG_LOOKUP_BITS)) * (double)(1 << RECIPLOG_LOOKUP_PREC));
|
|
}
|
|
|
|
/* build the rasterizer table */
|
|
for (info = predef_raster_table; info->callback; info++)
|
|
add_rasterizer(v, info);
|
|
|
|
/* create dithering tables */
|
|
for (int val = 0; val < 256*16*2; val++) {
|
|
int g = (val >> 0) & 1;
|
|
int x = (val >> 1) & 3;
|
|
int color = (val >> 3) & 0xff;
|
|
int y = (val >> 11) & 3;
|
|
|
|
if (!g) {
|
|
dither4_lookup[val] = DITHER_RB(color, dither_matrix_4x4[y * 4 + x]) >> 3;
|
|
dither2_lookup[val] = DITHER_RB(color, dither_matrix_2x2[y * 4 + x]) >> 3;
|
|
} else {
|
|
dither4_lookup[val] = DITHER_G(color, dither_matrix_4x4[y * 4 + x]) >> 2;
|
|
dither2_lookup[val] = DITHER_G(color, dither_matrix_2x2[y * 4 + x]) >> 2;
|
|
}
|
|
}
|
|
|
|
/* init the pens */
|
|
v->fbi.clut_dirty = 1;
|
|
if (v->type <= VOODOO_2) {
|
|
for (pen = 0; pen < 32; pen++)
|
|
v->fbi.clut[pen] = MAKE_ARGB(pen, pal5bit(pen), pal5bit(pen), pal5bit(pen));
|
|
v->fbi.clut[32] = MAKE_ARGB(32,0xff,0xff,0xff);
|
|
} else {
|
|
for (pen = 0; pen < 512; pen++)
|
|
v->fbi.clut[pen] = MAKE_RGB(pen,pen,pen);
|
|
}
|
|
v->fbi.ram = (Bit8u*)malloc(4<<20);
|
|
v->fbi.mask = (4<<20)-1;
|
|
v->fbi.frontbuf = 0;
|
|
v->fbi.backbuf = 1;
|
|
v->fbi.width = 640;
|
|
v->fbi.height = 480;
|
|
v->fbi.rowpixels = v->fbi.width;
|
|
v->fbi.fogdelta_mask = (v->type < VOODOO_2) ? 0xff : 0xfc;
|
|
|
|
/* build shared TMU tables */
|
|
init_tmu_shared(&v->tmushare);
|
|
|
|
init_tmu(v, &v->tmu[0], &v->reg[0x100], 0, 4 << 20);
|
|
init_tmu(v, &v->tmu[1], &v->reg[0x200], 0, 4 << 20);
|
|
|
|
v->tmu[0].reg = &v->reg[0x100];
|
|
v->tmu[1].reg = &v->reg[0x200];
|
|
|
|
v->tmu[0].ram = (Bit8u*)malloc(4<<20);
|
|
v->tmu[1].ram = (Bit8u*)malloc(4<<20);
|
|
v->tmu[0].mask = (4<<20)-1;
|
|
v->tmu[1].mask = (4<<20)-1;
|
|
|
|
v->tmu_config = 64;
|
|
|
|
v->thread_stats = new stats_block[16];
|
|
|
|
soft_reset(v);
|
|
}
|
|
|
|
bx_bool voodoo_update(/*running_device *device, bitmap_t *bitmap, */const rectangle *cliprect)
|
|
{
|
|
// voodoo_state *v = get_safe_token(device);
|
|
bx_bool changed = v->fbi.video_changed;
|
|
// int drawbuf = v->fbi.frontbuf;
|
|
// int statskey;
|
|
int x, y;
|
|
|
|
/* reset the video changed flag */
|
|
v->fbi.video_changed = 0;
|
|
|
|
/* if we are blank, just fill with black */
|
|
if (v->type <= VOODOO_2 && FBIINIT1_SOFTWARE_BLANK(v->reg[fbiInit1].u)) {
|
|
// bitmap_fill(bitmap, cliprect, 0);
|
|
return changed;
|
|
}
|
|
|
|
/* if the CLUT is dirty, recompute the pens array */
|
|
if (v->fbi.clut_dirty) {
|
|
Bit8u rtable[32], gtable[64], btable[32];
|
|
|
|
/* Voodoo/Voodoo-2 have an internal 33-entry CLUT */
|
|
if (v->type <= VOODOO_2) {
|
|
/* kludge: some of the Midway games write 0 to the last entry when they obviously mean FF */
|
|
if ((v->fbi.clut[32] & 0xffffff) == 0 && (v->fbi.clut[31] & 0xffffff) != 0)
|
|
v->fbi.clut[32] = 0x20ffffff;
|
|
|
|
/* compute the R/G/B pens first */
|
|
for (x = 0; x < 32; x++) {
|
|
/* treat X as a 5-bit value, scale up to 8 bits, and linear interpolate for red/blue */
|
|
y = (x << 3) | (x >> 2);
|
|
rtable[x] = (RGB_RED(v->fbi.clut[y >> 3]) * (8 - (y & 7)) + RGB_RED(v->fbi.clut[(y >> 3) + 1]) * (y & 7)) >> 3;
|
|
btable[x] = (RGB_BLUE(v->fbi.clut[y >> 3]) * (8 - (y & 7)) + RGB_BLUE(v->fbi.clut[(y >> 3) + 1]) * (y & 7)) >> 3;
|
|
|
|
/* treat X as a 6-bit value with LSB=0, scale up to 8 bits, and linear interpolate */
|
|
y = (x * 2) + 0;
|
|
y = (y << 2) | (y >> 4);
|
|
gtable[x*2+0] = (RGB_GREEN(v->fbi.clut[y >> 3]) * (8 - (y & 7)) + RGB_GREEN(v->fbi.clut[(y >> 3) + 1]) * (y & 7)) >> 3;
|
|
|
|
/* treat X as a 6-bit value with LSB=1, scale up to 8 bits, and linear interpolate */
|
|
y = (x * 2) + 1;
|
|
y = (y << 2) | (y >> 4);
|
|
gtable[x*2+1] = (RGB_GREEN(v->fbi.clut[y >> 3]) * (8 - (y & 7)) + RGB_GREEN(v->fbi.clut[(y >> 3) + 1]) * (y & 7)) >> 3;
|
|
}
|
|
}
|
|
|
|
/* Banshee and later have a 512-entry CLUT that can be bypassed */
|
|
else
|
|
{
|
|
int which = (v->banshee.io[io_vidProcCfg] >> 13) & 1;
|
|
int bypass = (v->banshee.io[io_vidProcCfg] >> 11) & 1;
|
|
|
|
/* compute R/G/B pens first */
|
|
for (x = 0; x < 32; x++) {
|
|
/* treat X as a 5-bit value, scale up to 8 bits */
|
|
y = (x << 3) | (x >> 2);
|
|
rtable[x] = bypass ? y : RGB_RED(v->fbi.clut[which * 256 + y]);
|
|
btable[x] = bypass ? y : RGB_BLUE(v->fbi.clut[which * 256 + y]);
|
|
|
|
/* treat X as a 6-bit value with LSB=0, scale up to 8 bits */
|
|
y = (x * 2) + 0;
|
|
y = (y << 2) | (y >> 4);
|
|
gtable[x*2+0] = bypass ? y : RGB_GREEN(v->fbi.clut[which * 256 + y]);
|
|
|
|
/* treat X as a 6-bit value with LSB=1, scale up to 8 bits, and linear interpolate */
|
|
y = (x * 2) + 1;
|
|
y = (y << 2) | (y >> 4);
|
|
gtable[x*2+1] = bypass ? y : RGB_GREEN(v->fbi.clut[which * 256 + y]);
|
|
}
|
|
}
|
|
|
|
/* now compute the actual pens array */
|
|
for (x = 0; x < 65536; x++) {
|
|
int r = rtable[(x >> 11) & 0x1f];
|
|
int g = gtable[(x >> 5) & 0x3f];
|
|
int b = btable[x & 0x1f];
|
|
v->fbi.pen[x] = MAKE_RGB(r, g, b);
|
|
}
|
|
|
|
/* no longer dirty */
|
|
v->fbi.clut_dirty = 0;
|
|
changed = 1;
|
|
}
|
|
|
|
/* debugging! */
|
|
// if (input_code_pressed(device->machine, KEYCODE_L))
|
|
// drawbuf = v->fbi.backbuf;
|
|
|
|
/* copy from the current front buffer */
|
|
/*
|
|
for (y = cliprect->min_y; y <= cliprect->max_y; y++)
|
|
if (y >= v->fbi.yoffs)
|
|
{
|
|
Bit16u *src = (Bit16u *)(v->fbi.ram + v->fbi.rgboffs[drawbuf]) + (y - v->fbi.yoffs) * v->fbi.rowpixels - v->fbi.xoffs;
|
|
Bit32u *dst = BITMAP_ADDR32(bitmap, y, 0);
|
|
for (x = cliprect->min_x; x <= cliprect->max_x; x++)
|
|
dst[x] = v->fbi.pen[src[x]];
|
|
}
|
|
*/
|
|
/* update stats display */
|
|
/*
|
|
statskey = (input_code_pressed(device->machine, KEYCODE_BACKSLASH) != 0);
|
|
if (statskey && statskey != v->stats.lastkey)
|
|
v->stats.display = !v->stats.display;
|
|
v->stats.lastkey = statskey;
|
|
*/
|
|
/* display stats */
|
|
/*
|
|
if (v->stats.display)
|
|
popmessage(v->stats.buffer, 0, 0);
|
|
*/
|
|
/* update render override */
|
|
/*
|
|
v->stats.render_override = input_code_pressed(device->machine, KEYCODE_ENTER);
|
|
if (DEBUG_DEPTH && v->stats.render_override)
|
|
{
|
|
for (y = cliprect->min_y; y <= cliprect->max_y; y++)
|
|
{
|
|
Bit16u *src = (Bit16u *)(v->fbi.ram + v->fbi.auxoffs) + (y - v->fbi.yoffs) * v->fbi.rowpixels - v->fbi.xoffs;
|
|
Bit32u *dst = BITMAP_ADDR32(bitmap, y, 0);
|
|
for (x = cliprect->min_x; x <= cliprect->max_x; x++)
|
|
dst[x] = ((src[x] << 8) & 0xff0000) | ((src[x] >> 0) & 0xff00) | ((src[x] >> 8) & 0xff);
|
|
}
|
|
}
|
|
*/
|
|
return changed;
|
|
}
|