067f23e3da
Enable disasm by default - in adds some useful information to debug messages in log file Remove defines for 8bit registers from cpu.h, the x86 arch defines not match defines used by set_reg and get_reg methods.
213 lines
7.0 KiB
C++
213 lines
7.0 KiB
C++
/////////////////////////////////////////////////////////////////////////
|
|
// $Id: apic.h,v 1.26 2006-01-27 19:50:00 sshwarts Exp $
|
|
/////////////////////////////////////////////////////////////////////////
|
|
//
|
|
// Copyright (C) 2001 MandrakeSoft S.A.
|
|
//
|
|
// MandrakeSoft S.A.
|
|
// 43, rue d'Aboukir
|
|
// 75002 Paris - France
|
|
// http://www.linux-mandrake.com/
|
|
// http://www.mandrakesoft.com/
|
|
//
|
|
// This library is free software; you can redistribute it and/or
|
|
// modify it under the terms of the GNU Lesser General Public
|
|
// License as published by the Free Software Foundation; either
|
|
// version 2 of the License, or (at your option) any later version.
|
|
//
|
|
// This library is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
// Lesser General Public License for more details.
|
|
//
|
|
// You should have received a copy of the GNU Lesser General Public
|
|
// License along with this library; if not, write to the Free Software
|
|
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
//
|
|
/////////////////////////////////////////////////////////////////////////
|
|
|
|
#ifndef BX_CPU_APIC_H
|
|
# define BX_CPU_APIC_H 1
|
|
|
|
#define APIC_BASE_ADDR 0xfee00000 // default APIC address
|
|
|
|
#if BX_CPU_LEVEL == 6 && BX_SUPPORT_SSE >= 2
|
|
#define BX_IMPLEMENT_XAPIC 1
|
|
#endif
|
|
|
|
#ifdef BX_IMPLEMENT_XAPIC
|
|
# define APIC_VERSION_ID 0x00050014 // P4 has 6 LVT entries
|
|
#else
|
|
# define APIC_VERSION_ID 0x00040010 // P6 has 4 LVT entries
|
|
#endif
|
|
|
|
#if BX_SUPPORT_APIC
|
|
|
|
#define BX_CPU_APIC(i) (&(BX_CPU(i)->local_apic))
|
|
|
|
typedef enum {
|
|
APIC_TYPE_IOAPIC,
|
|
APIC_TYPE_LOCAL_APIC
|
|
} bx_apic_type_t;
|
|
|
|
#define BX_NUM_LOCAL_APICS BX_SMP_PROCESSORS
|
|
|
|
class BOCHSAPI bx_generic_apic_c : public logfunctions {
|
|
protected:
|
|
bx_address base_addr;
|
|
Bit8u id;
|
|
#define APIC_UNKNOWN_ID 0xff
|
|
public:
|
|
bx_generic_apic_c ();
|
|
virtual ~bx_generic_apic_c () { }
|
|
// init is called during RESET and when an INIT message is delivered
|
|
virtual void init () { }
|
|
virtual void reset () { }
|
|
bx_address get_base (void) const { return base_addr; }
|
|
void set_base (bx_address newbase);
|
|
void set_id (Bit8u newid);
|
|
Bit8u get_id () const { return id; }
|
|
bx_bool is_selected (bx_address addr, Bit32u len);
|
|
void read (Bit32u addr, void *data, unsigned len);
|
|
virtual void read_aligned(Bit32u address, Bit32u *data, unsigned len) = 0;
|
|
virtual void write(Bit32u address, Bit32u *value, unsigned len) = 0;
|
|
virtual bx_apic_type_t get_type () = 0;
|
|
};
|
|
|
|
#define BX_APIC_FIRST_VECTOR 0x10
|
|
#define BX_APIC_LAST_VECTOR 0xfe
|
|
#define BX_LOCAL_APIC_MAX_INTS 256
|
|
|
|
#define APIC_LEVEL_TRIGGERED 1
|
|
#define APIC_EDGE_TRIGGERED 0
|
|
|
|
class BOCHSAPI bx_local_apic_c : public bx_generic_apic_c
|
|
{
|
|
Bit32u spurious_vector;
|
|
bx_bool software_enabled;
|
|
bx_bool focus_disable;
|
|
|
|
Bit32u task_priority; // Task priority (TPR)
|
|
Bit32u log_dest; // Logical destination (LDR)
|
|
Bit32u dest_format; // Destination format (DFR)
|
|
|
|
// ISR=in-service register. When an IRR bit is cleared, the corresponding
|
|
// bit in ISR is set.
|
|
Bit8u isr[BX_LOCAL_APIC_MAX_INTS];
|
|
// TMR=trigger mode register. Cleared for edge-triggered interrupts
|
|
// and set for level-triggered interrupts. If set, local APIC must send
|
|
// EOI message to all other APICs.
|
|
Bit8u tmr[BX_LOCAL_APIC_MAX_INTS];
|
|
// IRR=interrupt request register. When an interrupt is triggered by
|
|
// the I/O APIC or another processor, it sets a bit in irr. The bit is
|
|
// cleared when the interrupt is acknowledged by the processor.
|
|
Bit8u irr[BX_LOCAL_APIC_MAX_INTS];
|
|
|
|
#define APIC_ERR_ILLEGAL_ADDR 0x80
|
|
#define APIC_ERR_RX_ILLEGAL_VEC 0x40
|
|
#define APIC_ERR_TX_ILLEGAL_VEC 0x20
|
|
#define APIC_ERR_RX_ACCEPT_ERR 0x08
|
|
#define APIC_ERR_TX_ACCEPT_ERR 0x04
|
|
#define APIC_ERR_RX_CHECKSUM 0x02
|
|
#define APIC_ERR_TX_CHECKSUM 0x01
|
|
|
|
// Error status Register (ESR)
|
|
Bit32u error_status, shadow_error_status;
|
|
|
|
Bit32u icr_hi; // Interrupt command register (ICR)
|
|
Bit32u icr_lo;
|
|
|
|
#define APIC_LVT_ENTRIES 6
|
|
Bit32u lvt[6];
|
|
#define APIC_LVT_TIMER 0
|
|
#define APIC_LVT_THERMAL 1
|
|
#define APIC_LVT_PERFORM 2
|
|
#define APIC_LVT_LINT0 3
|
|
#define APIC_LVT_LINT1 4
|
|
#define APIC_LVT_ERROR 5
|
|
|
|
Bit32u timer_initial; // Initial timer count
|
|
Bit32u timer_current; // current timer count
|
|
|
|
Bit32u timer_divconf; // Timer divide configuration register
|
|
Bit32u timer_divide_counter, timer_divide_factor;
|
|
|
|
// Internal timer state, not accessible from bus
|
|
bx_bool timer_active;
|
|
int timer_handle;
|
|
Bit64u ticksInitial;
|
|
|
|
/* APIC delivery modes */
|
|
#define APIC_DM_FIXED 0
|
|
#define APIC_DM_LOWPRI 1
|
|
#define APIC_DM_SMI 2
|
|
/* RESERVED 3 */
|
|
#define APIC_DM_NMI 4
|
|
#define APIC_DM_INIT 5
|
|
#define APIC_DM_SIPI 6
|
|
#define APIC_DM_EXTINT 7
|
|
|
|
BX_CPU_C *cpu;
|
|
|
|
// corresponding BX_CPU_ID for the local APIC
|
|
unsigned cpu_id;
|
|
bx_bool bypass_irr_isr;
|
|
|
|
public:
|
|
bx_bool INTR;
|
|
bx_local_apic_c(BX_CPU_C *cpu);
|
|
virtual ~bx_local_apic_c(void) { }
|
|
virtual void reset (void);
|
|
virtual void init (void);
|
|
BX_CPU_C *get_cpu () { return cpu; }
|
|
void set_id (Bit8u newid); // redefine to set cpu->name
|
|
virtual void write (Bit32u addr, Bit32u *data, unsigned len);
|
|
virtual void read_aligned(Bit32u address, Bit32u *data, unsigned len);
|
|
void startup_msg (Bit32u vector);
|
|
// on local APIC, trigger means raise the CPU's INTR line. For now
|
|
// I also have to raise pc_system.INTR but that should be replaced
|
|
// with the cpu-specific INTR signals.
|
|
void trigger_irq (unsigned num, unsigned trigger_mode);
|
|
void untrigger_irq (unsigned num, unsigned trigger_mode);
|
|
Bit8u acknowledge_int (void); // only the local CPU should call this
|
|
int highest_priority_int (Bit8u *array);
|
|
void receive_EOI(Bit32u value);
|
|
void send_ipi(void);
|
|
void write_spurious_interrupt_register(Bit32u value);
|
|
void service_local_apic(void);
|
|
void print_status(void);
|
|
bx_bool match_logical_addr (Bit8u address);
|
|
virtual bx_apic_type_t get_type(void) { return APIC_TYPE_LOCAL_APIC; }
|
|
bx_bool deliver (Bit8u vector, Bit8u delivery_mode, Bit8u trig_mode);
|
|
Bit8u get_tpr (void);
|
|
void set_tpr (Bit8u tpr);
|
|
Bit8u get_ppr (void);
|
|
Bit8u get_apr (void);
|
|
bx_bool is_focus(Bit8u vector);
|
|
static void periodic_smf(void *);
|
|
void periodic(void);
|
|
void set_divide_configuration(Bit32u value);
|
|
void set_initial_timer_count(Bit32u value);
|
|
/*
|
|
Bit32u get_arb_id (void);
|
|
void set_arb_id (Bit32u newid);
|
|
*/
|
|
};
|
|
|
|
// For P6 and Pentium family processors the local APIC ID feild is 4 bits.
|
|
#ifdef BX_IMPLEMENT_XAPIC
|
|
#define APIC_MAX_ID 0xff
|
|
#define APIC_ID_MASK 0xff
|
|
#else
|
|
#define APIC_MAX_ID 0x0f
|
|
#define APIC_ID_MASK 0x0f
|
|
#endif
|
|
|
|
int apic_bus_deliver_lowest_priority(Bit8u vector, Bit8u dest, bx_bool trig_mode, bx_bool broadcast);
|
|
int apic_bus_deliver_interrupt(Bit8u vector, Bit8u dest, Bit8u delivery_mode, Bit8u dest_mode, bx_bool level, bx_bool trig_mode);
|
|
int apic_bus_broadcast_interrupt(Bit8u vector, Bit8u delivery_mode, bx_bool trig_mode, int exclude_cpu);
|
|
|
|
#endif // if BX_SUPPORT_APIC
|
|
|
|
#endif
|