Bochs/bochs/cpu/apic.h
Stanislav Shwartsman 7b6c2587a9 Now devices could be compiled separatelly from CPU
Averything that required cpu.h include now has it explicitly and there are a lot of files not dependant by CPU at all which will compile a lot faster now ...
2006-03-06 22:03:16 +00:00

213 lines
7.0 KiB
C++

/////////////////////////////////////////////////////////////////////////
// $Id: apic.h,v 1.29 2006-03-06 22:02:51 sshwarts Exp $
/////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2001 MandrakeSoft S.A.
//
// MandrakeSoft S.A.
// 43, rue d'Aboukir
// 75002 Paris - France
// http://www.linux-mandrake.com/
// http://www.mandrakesoft.com/
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
/////////////////////////////////////////////////////////////////////////
#ifndef BX_CPU_APIC_H
# define BX_CPU_APIC_H 1
#if BX_CPU_LEVEL == 6 && BX_SUPPORT_SSE >= 2
#define BX_IMPLEMENT_XAPIC 1
#endif
#if BX_SUPPORT_APIC
typedef enum {
APIC_TYPE_IOAPIC,
APIC_TYPE_LOCAL_APIC
} bx_apic_type_t;
#define APIC_LEVEL_TRIGGERED 1
#define APIC_EDGE_TRIGGERED 0
class BOCHSAPI bx_generic_apic_c : public logfunctions {
protected:
bx_phy_address base_addr;
Bit8u id;
#define APIC_UNKNOWN_ID 0xff
public:
bx_generic_apic_c(bx_phy_address base);
virtual ~bx_generic_apic_c() { }
// init is called during RESET and when an INIT message is delivered
virtual void init() { }
virtual void reset() { }
bx_phy_address get_base(void) const { return base_addr; }
void set_base(bx_phy_address newbase);
void set_id(Bit8u newid);
Bit8u get_id() const { return id; }
bx_bool is_selected (bx_phy_address addr, unsigned len);
void read(bx_phy_address addr, void *data, unsigned len);
virtual void read_aligned(bx_phy_address address, Bit32u *data, unsigned len) = 0;
virtual void write(bx_phy_address address, Bit32u *value, unsigned len) = 0;
virtual bx_apic_type_t get_type () = 0;
};
#ifdef BX_INCLUDE_LOCAL_APIC
#define BX_CPU_APIC(i) (&(BX_CPU(i)->local_apic))
#ifdef BX_IMPLEMENT_XAPIC
# define BX_LAPIC_VERSION_ID 0x00050014 // P4 has 6 LVT entries
#else
# define BX_LAPIC_VERSION_ID 0x00040010 // P6 has 4 LVT entries
#endif
#define BX_LAPIC_BASE_ADDR 0xfee00000 // default Local APIC address
#define BX_NUM_LOCAL_APICS BX_SMP_PROCESSORS
#define BX_APIC_FIRST_VECTOR 0x10
#define BX_APIC_LAST_VECTOR 0xfe
#define BX_LOCAL_APIC_MAX_INTS 256
class BOCHSAPI bx_local_apic_c : public bx_generic_apic_c
{
Bit32u spurious_vector;
bx_bool software_enabled;
bx_bool focus_disable;
Bit32u task_priority; // Task priority (TPR)
Bit32u log_dest; // Logical destination (LDR)
Bit32u dest_format; // Destination format (DFR)
// ISR=in-service register. When an IRR bit is cleared, the corresponding
// bit in ISR is set.
Bit8u isr[BX_LOCAL_APIC_MAX_INTS];
// TMR=trigger mode register. Cleared for edge-triggered interrupts
// and set for level-triggered interrupts. If set, local APIC must send
// EOI message to all other APICs.
Bit8u tmr[BX_LOCAL_APIC_MAX_INTS];
// IRR=interrupt request register. When an interrupt is triggered by
// the I/O APIC or another processor, it sets a bit in irr. The bit is
// cleared when the interrupt is acknowledged by the processor.
Bit8u irr[BX_LOCAL_APIC_MAX_INTS];
#define APIC_ERR_ILLEGAL_ADDR 0x80
#define APIC_ERR_RX_ILLEGAL_VEC 0x40
#define APIC_ERR_TX_ILLEGAL_VEC 0x20
#define APIC_ERR_RX_ACCEPT_ERR 0x08
#define APIC_ERR_TX_ACCEPT_ERR 0x04
#define APIC_ERR_RX_CHECKSUM 0x02
#define APIC_ERR_TX_CHECKSUM 0x01
// Error status Register (ESR)
Bit32u error_status, shadow_error_status;
Bit32u icr_hi; // Interrupt command register (ICR)
Bit32u icr_lo;
#define APIC_LVT_ENTRIES 6
Bit32u lvt[6];
#define APIC_LVT_TIMER 0
#define APIC_LVT_THERMAL 1
#define APIC_LVT_PERFORM 2
#define APIC_LVT_LINT0 3
#define APIC_LVT_LINT1 4
#define APIC_LVT_ERROR 5
Bit32u timer_initial; // Initial timer count
Bit32u timer_current; // current timer count
Bit32u timer_divconf; // Timer divide configuration register
Bit32u timer_divide_counter, timer_divide_factor;
// Internal timer state, not accessible from bus
bx_bool timer_active;
int timer_handle;
Bit64u ticksInitial;
/* APIC delivery modes */
#define APIC_DM_FIXED 0
#define APIC_DM_LOWPRI 1
#define APIC_DM_SMI 2
/* RESERVED 3 */
#define APIC_DM_NMI 4
#define APIC_DM_INIT 5
#define APIC_DM_SIPI 6
#define APIC_DM_EXTINT 7
BX_CPU_C *cpu;
// corresponding BX_CPU_ID for the local APIC
unsigned cpu_id;
bx_bool bypass_irr_isr;
public:
bx_bool INTR;
bx_local_apic_c(BX_CPU_C *cpu);
virtual ~bx_local_apic_c(void) { }
virtual void reset(void);
virtual void init(void);
BX_CPU_C *get_cpu() { return cpu; }
void set_id(Bit8u newid); // redefine to set cpu->name
virtual void write(bx_phy_address addr, Bit32u *data, unsigned len);
virtual void read_aligned(bx_phy_address address, Bit32u *data, unsigned len);
void startup_msg(Bit32u vector);
// on local APIC, trigger means raise the CPU's INTR line. For now
// I also have to raise pc_system.INTR but that should be replaced
// with the cpu-specific INTR signals.
void trigger_irq(unsigned num, unsigned trigger_mode);
void untrigger_irq(unsigned num, unsigned trigger_mode);
Bit8u acknowledge_int(void); // only the local CPU should call this
int highest_priority_int(Bit8u *array);
void receive_EOI(Bit32u value);
void send_ipi(void);
void write_spurious_interrupt_register(Bit32u value);
void service_local_apic(void);
void print_status(void);
bx_bool match_logical_addr (Bit8u address);
virtual bx_apic_type_t get_type(void) { return APIC_TYPE_LOCAL_APIC; }
bx_bool deliver(Bit8u vector, Bit8u delivery_mode, Bit8u trig_mode);
Bit8u get_tpr(void);
void set_tpr(Bit8u tpr);
Bit8u get_ppr(void);
Bit8u get_apr(void);
bx_bool is_focus(Bit8u vector);
static void periodic_smf(void *);
void periodic(void);
void set_divide_configuration(Bit32u value);
void set_initial_timer_count(Bit32u value);
};
#endif /* BX_INCLUDE_LOCAL_APIC */
// For P6 and Pentium family processors the local APIC ID feild is 4 bits.
#ifdef BX_IMPLEMENT_XAPIC
#define APIC_MAX_ID 0xff
#define APIC_ID_MASK 0xff
#else
#define APIC_MAX_ID 0x0f
#define APIC_ID_MASK 0x0f
#endif
int apic_bus_deliver_lowest_priority(Bit8u vector, Bit8u dest, bx_bool trig_mode, bx_bool broadcast);
int apic_bus_deliver_interrupt(Bit8u vector, Bit8u dest, Bit8u delivery_mode, Bit8u dest_mode, bx_bool level, bx_bool trig_mode);
int apic_bus_broadcast_interrupt(Bit8u vector, Bit8u delivery_mode, bx_bool trig_mode, int exclude_cpu);
#endif // if BX_SUPPORT_APIC
#endif