318 lines
13 KiB
Plaintext
318 lines
13 KiB
Plaintext
# You many now use double quotes around pathnames, in case
|
|
# your pathname includes spaces.
|
|
|
|
#=======================================================================
|
|
# ROMIMAGE:
|
|
# You now need to load a ROM BIOS into F0000-FFFFF. I've wiped
|
|
# out most of the BIOS hooks, and replace them with real BIOS
|
|
# support. Normally, you can use a precompiled BIOS in the bios/
|
|
# directory, named BIOS-bochs-yymmdd. Use the latest one in there.
|
|
#=======================================================================
|
|
#romimage: bios/BIOS-bochs-970717a
|
|
romimage: file=bios/BIOS-bochs-latest, address=0xf0000
|
|
#romimage: file=bios/BIOS-bochs-2-processors, address=0xf0000
|
|
#romimage: file=bios/BIOS-bochs-4-processors, address=0xf0000
|
|
#romimage: file=bios/rombios.bin, address=0xf0000
|
|
|
|
#=======================================================================
|
|
# MEGS
|
|
# set this to the default number of Megabytes of memory you want
|
|
# to emulate. You may also pass the '-megs xyz' option to bochs
|
|
#
|
|
# The default is 32MB, most OS's won't need more than that.
|
|
#=======================================================================
|
|
#megs: 256
|
|
#megs: 128
|
|
#megs: 64
|
|
megs: 32
|
|
#megs: 16
|
|
#megs: 8
|
|
|
|
#=======================================================================
|
|
# VGAROMIMAGE
|
|
# You now need to load a VGA ROM BIOS into C0000.
|
|
#=======================================================================
|
|
vgaromimage: bios/VGABIOS-elpin-2.40
|
|
|
|
#=======================================================================
|
|
# FLOPPYA:
|
|
# Point this to pathname of floppy image file or device
|
|
# This should be of a bootable floppy(image/device) if you're
|
|
# booting from 'a'.
|
|
#
|
|
# You can set the initial status of the media to 'ejected' or 'inserted'.
|
|
# floppya: 2_88=path, status=ejected (2.88M 3.5" floppy)
|
|
# floppya: 1_44=path, status=inserted (1.44M 3.5" floppy)
|
|
# floppya: 1_2=path, status=ejected (1.2M 5.25" floppy)
|
|
# floppya: 720k=path, status=inserted (720K 3.5" floppy)
|
|
#
|
|
# The default is 1_44=/dev/fd0, at least I think that's what most people use.
|
|
#=======================================================================
|
|
#floppya: 1_44=/dev/fd0, status=ejected
|
|
#floppya: file=../1.44, status=ejected
|
|
#floppya: 1_44=/dev/fd0H1440, status=ejected
|
|
#floppya: 1_2=../1_2, status=ejected
|
|
floppya: 1_44=a.img, status=inserted
|
|
|
|
#=======================================================================
|
|
# FLOPPYB:
|
|
# See FLOPPYA above for syntax
|
|
#=======================================================================
|
|
floppyb: 1_44=b.img, status=inserted
|
|
|
|
#=======================================================================
|
|
# DISKC: file=, cyl=, heads=, spt=
|
|
# Point this at a 10M, 20M, or 30M hard disk image file.
|
|
# Read INSTALL to create one.
|
|
# Examples:
|
|
# diskc: file=10M.sample, cyl=306, heads=4, spt=17
|
|
# diskc: file=20M.sample, cyl=615, heads=4, spt=17
|
|
# diskc: file=30M.sample, cyl=615, heads=6, spt=17
|
|
# diskc: file=46M.sample, cyl=940, heads=6, spt=17
|
|
# diskc: file=62M.sample, cyl=940, heads=8, spt=17
|
|
# diskc: file=112M.sample, cyl=900, heads=15, spt=17
|
|
# diskc: file=483M.sample, cyl=1024, heads=15, spt=63
|
|
#=======================================================================
|
|
diskc: file="30M.sample", cyl=615, heads=6, spt=17
|
|
|
|
#=======================================================================
|
|
# DISKD:
|
|
# See DISKC above for syntax
|
|
#
|
|
# NOTE: diskd and cdromd must not be used together!
|
|
#=======================================================================
|
|
#diskd: file="diskd.img", cyl=615, heads=6, spt=17
|
|
|
|
#=======================================================================
|
|
# CDROM
|
|
# cdromd: dev=/dev/cdrom, status=inserted
|
|
# cdromd: dev=/dev/cdrom, status=ejected
|
|
#=======================================================================
|
|
#cdromd: dev=/dev/cdrom, status=ejected
|
|
#cdromd: dev=/dev/cdrom, status=inserted
|
|
|
|
#=======================================================================
|
|
# NEWHARDDRIVESUPPORT: enabled=[0|1]
|
|
# As of cvs version on 5/17/2001, newharddrivesupport is on by default.
|
|
#=======================================================================
|
|
#newharddrivesupport: enabled=1
|
|
|
|
#=======================================================================
|
|
# BOOT:
|
|
# This defines your boot drive. You can either boot from 'a' or 'c'.
|
|
# Examples:
|
|
# boot: c
|
|
# boot: a
|
|
#=======================================================================
|
|
#boot: a
|
|
boot: c
|
|
|
|
#=======================================================================
|
|
# LOG:
|
|
# Give the path of the log file you'd like Bochs debug and misc. verbage
|
|
# to be written to. If you really don't want it, make it /dev/null. :^(
|
|
#
|
|
# Examples:
|
|
# log: ./bochs.out
|
|
# log: /dev/tty
|
|
#=======================================================================
|
|
#log: /dev/null
|
|
log: bochsout.txt
|
|
|
|
#=======================================================================
|
|
# LOG CONTROLS
|
|
#
|
|
# Bochs now has four severity levels for event logging.
|
|
# panic: cannot proceed. If you choose to continue after a panic,
|
|
# don't be surprised if you get strange behavior or crashes.
|
|
# error: something went wrong, but it is probably safe to continue the
|
|
# simulation.
|
|
# info: interesting or useful messages.
|
|
# debug: messages useful only when debugging the code. This may
|
|
# spit out thousands per second.
|
|
#
|
|
# For events of each level, you can choose to crash, report, or ignore.
|
|
# TODO: allow choice based on the facility: e.g. crash on panics from
|
|
# everything except the cdrom, and only report those.
|
|
#
|
|
# If you are experiencing many panics, it can be helpful to change
|
|
# the panic action to report instead of fatal. However, be aware
|
|
# that anything executed after a panic is uncharted territory and can
|
|
# cause bochs to become unstable. The panic is a "graceful exit," so
|
|
# if you disable it you may get a spectacular disaster instead.
|
|
#=======================================================================
|
|
panic: action=fatal
|
|
error: action=report
|
|
info: action=report
|
|
debug: action=ignore
|
|
|
|
#=======================================================================
|
|
# SB16:
|
|
# This defines the SB16 sound emulation. It can have several of the
|
|
# following properties.
|
|
# All properties are in the format sb16: property=value
|
|
# midi: The filename is where the midi data is sent. This can be a
|
|
# device or just a file if you want to record the midi data.
|
|
# midimode:
|
|
# 0=no data
|
|
# 1=output to device (system dependent. midi denotes the device driver)
|
|
# 2=SMF file output, including headers
|
|
# 3=output the midi data stream to the file (no midi headers and no
|
|
# delta times, just command and data bytes)
|
|
# wave: This is the device/file where wave output is stored
|
|
# wavemode:
|
|
# 0=no data
|
|
# 1=output to device (system dependent. wave denotes the device driver)
|
|
# 2=VOC file output, incl. headers
|
|
# 3=output the raw wave stream to the file
|
|
# log: The file to write the sb16 emulator messages to.
|
|
# loglevel:
|
|
# 0=no log
|
|
# 1=only midi program and bank changes
|
|
# 2=severe errors
|
|
# 3=all errors
|
|
# 4=all errors plus all port accesses
|
|
# 5=all errors and port accesses plus a lot of extra info
|
|
# dmatimer:
|
|
# microseconds per second for a DMA cycle. Make it smaller to fix
|
|
# non-continous sound. 750000 is usually a good value. This needs a
|
|
# reasonably correct setting for IPS.
|
|
#
|
|
# For an example look at the next line:
|
|
#=======================================================================
|
|
|
|
#sb16: midimode=1, midi=/dev/midi00, wavemode=1, wave=/dev/dsp, loglevel=2, log=sb16.log, dmatimer=600000
|
|
|
|
#=======================================================================
|
|
# VGA_UPDATE_INTERVAL:
|
|
# Video memory is scanned for updates and screen updated every so many
|
|
# virtual seconds. The default is 300000, about 3Hz. This is generally
|
|
# plenty. Keep in mind that you must tweak the 'ips:' directive
|
|
# to be as close to the number of emulated instructions-per-second
|
|
# your workstation can do, for this to be accurate.
|
|
#
|
|
# Examples:
|
|
# vga_update_interval: 250000
|
|
#=======================================================================
|
|
vga_update_interval: 300000
|
|
|
|
# using for Winstone '98 tests
|
|
#vga_update_interval: 100000
|
|
|
|
#=======================================================================
|
|
# KEYBOARD_SERIAL_DELAY:
|
|
# Approximate time in microseconds that it takes one character to
|
|
# be transfered from the keyboard to controller over the serial path.
|
|
# Examples:
|
|
# keyboard_serial_delay: 200
|
|
#=======================================================================
|
|
keyboard_serial_delay: 250
|
|
|
|
#=======================================================================
|
|
# FLOPPY_COMMAND_DELAY:
|
|
# Time in microseconds to wait before completing some floppy commands
|
|
# such as read/write/seek/etc, which normally have a delay associated.
|
|
# I had this hardwired to 50,000 before.
|
|
#
|
|
# Examples:
|
|
# floppy_command_delay: 50000
|
|
#=======================================================================
|
|
floppy_command_delay: 500
|
|
|
|
#=======================================================================
|
|
# IPS:
|
|
# Emulated Instructions Per Second. This is the number of IPS that bochs
|
|
# is capable of running on your machine. Read the note in config.h
|
|
# on how to find this. Make sure to recompile after.
|
|
#
|
|
# IPS is used to calibrate many time-dependent events within the bochs
|
|
# simulation. For example, changing IPS affects the frequency of VGA
|
|
# updates, the duration of time before a key starts to autorepeat, and
|
|
# the measurement of BogoMips and other benchmarks.
|
|
#
|
|
# Examples:
|
|
# Machine Mips
|
|
# ________________________________________________________________
|
|
# 650Mhz Athlon K-7 with Linux 2.4.4/egcs-2.91.66 2 to 2.5 Mips
|
|
# 400Mhz Pentium II with Linux 2.0.36/egcs-1.0.3 1 to 1.8 Mips
|
|
# 166Mhz 64bit Sparc with Solaris 2.x approx 0.75 Mips
|
|
# 200Mhz Pentium with Linux 2.x approx 0.5 Mips
|
|
#
|
|
#=======================================================================
|
|
ips: 1000000
|
|
|
|
#=======================================================================
|
|
# MAX_IPS and SYSTEM_CLOCK_SYNC
|
|
# These two options are experimental, and may not even be implemented
|
|
# yet. If MAX_IPS is set to a value other than 0, Bochs will try to
|
|
# slow down the simulation until the average instructions per unit time
|
|
# reaches MAX_IPS. This can be used to prevent Bochs from speeding through
|
|
# wait intervals, which has caused problems with key autorepeats and
|
|
# other time sensitive tasks. SYSTEM_CLOCK_SYNC prohibits the Bochs
|
|
# simulation from running (very much) faster than the system clock, also
|
|
# by inserting delays occasionally. Some examples of how ips,max_ips,
|
|
# and system_clock sync interact:
|
|
# 1. ips=500000, max_ips=0, system_clock_sync disabled
|
|
# Bochs runs as fast as possible. Timer interrupts are scheduled
|
|
# as if it was running at 500000 instructions per second. This is
|
|
# the old behavior, and it's still the default.
|
|
# 2. ips=500000, max_ips=700000, system_clock_sync enabled.
|
|
# Bochs will not run faster than system time, and if it gets behind
|
|
# it will run at a maximum of 40% faster than real time until it
|
|
# catches up.
|
|
# 3. ips=500000, max_ips=500000, system_clock_sync disabled
|
|
# If Bochs gets behind, it will stay behind forever
|
|
# instead of running faster to catch up with the system clock.
|
|
#=======================================================================
|
|
max_ips: 0
|
|
system_clock_sync: enabled=0
|
|
|
|
#=======================================================================
|
|
# mouse: Not used in any of the GUI specific modules, but the option
|
|
# bx_options.mouse_enabled is set to this value. The idea,
|
|
# is that the GUI code should not generate mouse events when
|
|
# not enabled. The hardware emualation itself is not disabled
|
|
# by this. This is to facilitate deterministic runs of bochs.
|
|
#
|
|
# Examples:
|
|
# mouse: enabled=1
|
|
# mouse: enabled=0
|
|
#
|
|
# I wouldn't recommend enabling the mouse by default, unless you have a
|
|
# really good reason to do so.
|
|
#=======================================================================
|
|
mouse: enabled=0
|
|
|
|
#=======================================================================
|
|
# private_colormap: Request that the GUI create and use it's own
|
|
# non-shared colormap. This colormap will be used
|
|
# when in the bochs window. If not enabled, a
|
|
# shared colormap scheme may be used. Not implemented
|
|
# on all GUI's.
|
|
#
|
|
# Examples:
|
|
# private_colormap: enabled=1
|
|
# private_colormap: enabled=0
|
|
#=======================================================================
|
|
private_colormap: enabled=0
|
|
|
|
#=======================================================================
|
|
# other stuff
|
|
#=======================================================================
|
|
# magic_break
|
|
# ne2k: ioaddr=0x280, irq=9, mac=b0:c4:20:00:00:00, ethmod=fbsd, ethdev=xl0
|
|
#load32bitOSImage: os=nullkernel, path=../kernel.img, iolog=../vga_io.log
|
|
#load32bitOSImage: os=linux, path=../linux.img, iolog=../vga_io.log, initrd=../initrd.img
|
|
i440fxsupport: enabled=0
|
|
#time0: 938581955
|
|
|
|
|
|
#=======================================================================
|
|
# for Macintosh, use the style of pathnames in the following
|
|
# examples.
|
|
#
|
|
# vgaromimage: :bios:VGABIOS-elpin-2.20
|
|
# romimage: file=:bios:BIOS-bochs-981222a, address=0xf0000
|
|
# floppya: 1_44=[fd:], status=inserted
|
|
#=======================================================================
|