1491 lines
51 KiB
C++
1491 lines
51 KiB
C++
/////////////////////////////////////////////////////////////////////////
|
|
// $Id: paging.cc,v 1.61 2005-08-05 12:47:31 sshwarts Exp $
|
|
/////////////////////////////////////////////////////////////////////////
|
|
//
|
|
// Copyright (C) 2001 MandrakeSoft S.A.
|
|
//
|
|
// MandrakeSoft S.A.
|
|
// 43, rue d'Aboukir
|
|
// 75002 Paris - France
|
|
// http://www.linux-mandrake.com/
|
|
// http://www.mandrakesoft.com/
|
|
//
|
|
// This library is free software; you can redistribute it and/or
|
|
// modify it under the terms of the GNU Lesser General Public
|
|
// License as published by the Free Software Foundation; either
|
|
// version 2 of the License, or (at your option) any later version.
|
|
//
|
|
// This library is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
// Lesser General Public License for more details.
|
|
//
|
|
// You should have received a copy of the GNU Lesser General Public
|
|
// License along with this library; if not, write to the Free Software
|
|
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
|
|
// Notes from merge of x86-64 enhancements: (KPL)
|
|
// Looks like for x86-64/PAE=1/PTE with PSE=1, the
|
|
// CR4.PSE field is not consulted by the processor?
|
|
// Fix the PAE case to not update the page table tree entries
|
|
// until the final protection check? This is how it is on
|
|
// P6 for non-PAE anyways...
|
|
|
|
|
|
|
|
#define NEED_CPU_REG_SHORTCUTS 1
|
|
#include "bochs.h"
|
|
#define LOG_THIS BX_CPU_THIS_PTR
|
|
|
|
#if 0
|
|
// X86 Registers Which Affect Paging:
|
|
// ==================================
|
|
//
|
|
// CR0:
|
|
// bit 31: PG, Paging (386+)
|
|
// bit 16: WP, Write Protect (486+)
|
|
// 0: allow supervisor level writes into user level RO pages
|
|
// 1: inhibit supervisor level writes into user level RO pages
|
|
//
|
|
// CR3:
|
|
// bit 31..12: PDBR, Page Directory Base Register (386+)
|
|
// bit 4: PCD, Page level Cache Disable (486+)
|
|
// Controls caching of current page directory. Affects only the processor's
|
|
// internal caches (L1 and L2).
|
|
// This flag ignored if paging disabled (PG=0) or cache disabled (CD=1).
|
|
// Values:
|
|
// 0: Page Directory can be cached
|
|
// 1: Page Directory not cached
|
|
// bit 3: PWT, Page level Writes Transparent (486+)
|
|
// Controls write-through or write-back caching policy of current page
|
|
// directory. Affects only the processor's internal caches (L1 and L2).
|
|
// This flag ignored if paging disabled (PG=0) or cache disabled (CD=1).
|
|
// Values:
|
|
// 0: write-back caching enabled
|
|
// 1: write-through caching enabled
|
|
//
|
|
// CR4:
|
|
// bit 4: PSE, Page Size Extension (Pentium+)
|
|
// 0: 4KByte pages (typical)
|
|
// 1: 4MByte or 2MByte pages
|
|
// bit 5: PAE, Physical Address Extension (Pentium Pro+)
|
|
// 0: 32bit physical addresses
|
|
// 1: 36bit physical addresses
|
|
// bit 7: PGE, Page Global Enable (Pentium Pro+)
|
|
// The global page feature allows frequently used or shared pages
|
|
// to be marked as global (PDE or PTE bit 8). Global pages are
|
|
// not flushed from TLB on a task switch or write to CR3.
|
|
// Values:
|
|
// 0: disables global page feature
|
|
// 1: enables global page feature
|
|
//
|
|
// Page size extention and physical address size extention matrix
|
|
// ====================================================================
|
|
// CR0.PG CR4.PAE CR4.PSE PDE.PS | page size physical address size
|
|
// ====================================================================
|
|
// 0 X X X | - paging disabled
|
|
// 1 0 0 X | 4K 32bits
|
|
// 1 0 1 0 | 4K 32bits
|
|
// 1 0 1 1 | 4M 32bits
|
|
// 1 1 X 0 | 4K 36bits
|
|
// 1 1 X 1 | 2M 36bits
|
|
|
|
|
|
// Page Directory/Table Entry format when P=0:
|
|
// ===========================================
|
|
//
|
|
// 31.. 1: available
|
|
// 0: P=0
|
|
|
|
// Page Directory Entry format when P=1 (4-Kbyte Page Table):
|
|
// ==========================================================
|
|
//
|
|
// 31..12: page table base address
|
|
// 11.. 9: available
|
|
// 8: G (Pentium Pro+), 0=reserved otherwise
|
|
// 7: PS (Pentium+), 0=reserved otherwise
|
|
// 6: 0=reserved
|
|
// 5: A (386+)
|
|
// 4: PCD (486+), 0=reserved otherwise
|
|
// 3: PWT (486+), 0=reserved otherwise
|
|
// 2: U/S (386+)
|
|
// 1: R/W (386+)
|
|
// 0: P=1 (386+)
|
|
|
|
// Page Table Entry format when P=1 (4-Kbyte Page):
|
|
// ================================================
|
|
//
|
|
// 63..63: NX |
|
|
// 62..52: available | Long mode
|
|
// 51..32: page base address |
|
|
// 31..12: page base address
|
|
// 11.. 9: available
|
|
// 8: G (Pentium Pro+), 0=reserved otherwise
|
|
// 7: PAT
|
|
// 6: D (386+)
|
|
// 5: A (386+)
|
|
// 4: PCD (486+), 0=reserved otherwise
|
|
// 3: PWT (486+), 0=reserved otherwise
|
|
// 2: U/S (386+)
|
|
// 1: R/W (386+)
|
|
// 0: P=1 (386+)
|
|
|
|
// Page Directory/Table Entry Fields Defined:
|
|
// ==========================================
|
|
// NX: No Execute
|
|
// This bit controls the ability to execute code from all physical
|
|
// pages mapped by the table entry.
|
|
// 0: Code can be executed from the mapped physical pages
|
|
// 1: Code cannot be executed
|
|
// The NX bit can only be set when the no-execute page-protection
|
|
// feature is enabled by setting EFER.NXE=1, If EFER.NXE=0, the
|
|
// NX bit is treated as reserved. In this case, #PF occurs if the
|
|
// NX bit is not cleared to zero.
|
|
//
|
|
// G: Global flag
|
|
// Indiciates a global page when set. When a page is marked
|
|
// global and the PGE flag in CR4 is set, the page table or
|
|
// directory entry for the page is not invalidated in the TLB
|
|
// when CR3 is loaded or a task switch occurs. Only software
|
|
// clears and sets this flag. For page directory entries that
|
|
// point to page tables, this flag is ignored and the global
|
|
// characteristics of a page are set in the page table entries.
|
|
//
|
|
// PS: Page Size flag
|
|
// Only used in page directory entries. When PS=0, the page
|
|
// size is 4KBytes and the page directory entry points to a
|
|
// page table. When PS=1, the page size is 4MBytes for
|
|
// normal 32-bit addressing and 2MBytes if extended physical
|
|
// addressing.
|
|
//
|
|
// PAT: Page-Attribute Table
|
|
// This bit is only present in the lowest level of the page
|
|
// translation hierarchy. The PAT bit is the high-order bit
|
|
// of a 3-bit index into the PAT register. The other two
|
|
// bits involved in forming the index are the PCD and PWT
|
|
// bits.
|
|
//
|
|
// D: Dirty bit:
|
|
// Processor sets the Dirty bit in the 2nd-level page table before a
|
|
// write operation to an address mapped by that page table entry.
|
|
// Dirty bit in directory entries is undefined.
|
|
//
|
|
// A: Accessed bit:
|
|
// Processor sets the Accessed bits in both levels of page tables before
|
|
// a read/write operation to a page.
|
|
//
|
|
// PCD: Page level Cache Disable
|
|
// Controls caching of individual pages or page tables.
|
|
// This allows a per-page based mechanism to disable caching, for
|
|
// those pages which contained memory mapped IO, or otherwise
|
|
// should not be cached. Processor ignores this flag if paging
|
|
// is not used (CR0.PG=0) or the cache disable bit is set (CR0.CD=1).
|
|
// Values:
|
|
// 0: page or page table can be cached
|
|
// 1: page or page table is not cached (prevented)
|
|
//
|
|
// PWT: Page level Write Through
|
|
// Controls the write-through or write-back caching policy of individual
|
|
// pages or page tables. Processor ignores this flag if paging
|
|
// is not used (CR0.PG=0) or the cache disable bit is set (CR0.CD=1).
|
|
// Values:
|
|
// 0: write-back caching
|
|
// 1: write-through caching
|
|
//
|
|
// U/S: User/Supervisor level
|
|
// 0: Supervisor level - for the OS, drivers, etc.
|
|
// 1: User level - application code and data
|
|
//
|
|
// R/W: Read/Write access
|
|
// 0: read-only access
|
|
// 1: read/write access
|
|
//
|
|
// P: Present
|
|
// 0: Not present
|
|
// 1: Present
|
|
// ==========================================
|
|
|
|
|
|
// Combined page directory/page table protection:
|
|
// ==============================================
|
|
// There is one column for the combined effect on a 386
|
|
// and one column for the combined effect on a 486+ CPU.
|
|
//
|
|
// +----------------+-----------------+----------------+----------------+
|
|
// | Page Directory| Page Table | Combined 386 | Combined 486+ |
|
|
// |Privilege Type | Privilege Type | Privilege Type| Privilege Type|
|
|
// |----------------+-----------------+----------------+----------------|
|
|
// |User R | User R | User R | User R |
|
|
// |User R | User RW | User R | User R |
|
|
// |User RW | User R | User R | User R |
|
|
// |User RW | User RW | User RW | User RW |
|
|
// |User R | Supervisor R | User R | Supervisor RW |
|
|
// |User R | Supervisor RW | User R | Supervisor RW |
|
|
// |User RW | Supervisor R | User R | Supervisor RW |
|
|
// |User RW | Supervisor RW | User RW | Supervisor RW |
|
|
// |Supervisor R | User R | User R | Supervisor RW |
|
|
// |Supervisor R | User RW | User R | Supervisor RW |
|
|
// |Supervisor RW | User R | User R | Supervisor RW |
|
|
// |Supervisor RW | User RW | User RW | Supervisor RW |
|
|
// |Supervisor R | Supervisor R | Supervisor RW | Supervisor RW |
|
|
// |Supervisor R | Supervisor RW | Supervisor RW | Supervisor RW |
|
|
// |Supervisor RW | Supervisor R | Supervisor RW | Supervisor RW |
|
|
// |Supervisor RW | Supervisor RW | Supervisor RW | Supervisor RW |
|
|
// +----------------+-----------------+----------------+----------------+
|
|
|
|
// Page Fault Error Code Format:
|
|
// =============================
|
|
//
|
|
// bits 31..4: Reserved
|
|
// bit 3: RSVD (Pentium Pro+)
|
|
// 0: fault caused by reserved bits set to 1 in a page directory
|
|
// when the PSE or PAE flags in CR4 are set to 1
|
|
// 1: fault was not caused by reserved bit violation
|
|
// bit 2: U/S (386+)
|
|
// 0: fault originated when in supervior mode
|
|
// 1: fault originated when in user mode
|
|
// bit 1: R/W (386+)
|
|
// 0: access causing the fault was a read
|
|
// 1: access causing the fault was a write
|
|
// bit 0: P (386+)
|
|
// 0: fault caused by a nonpresent page
|
|
// 1: fault caused by a page level protection violation
|
|
|
|
|
|
// Some paging related notes:
|
|
// ==========================
|
|
//
|
|
// - When the processor is running in supervisor level, all pages are both
|
|
// readable and writable (write-protect ignored). When running at user
|
|
// level, only pages which belong to the user level are accessible;
|
|
// read/write & read-only are readable, read/write are writable.
|
|
//
|
|
// - If the Present bit is 0 in either level of page table, an
|
|
// access which uses these entries will generate a page fault.
|
|
//
|
|
// - (A)ccess bit is used to report read or write access to a page
|
|
// or 2nd level page table.
|
|
//
|
|
// - (D)irty bit is used to report write access to a page.
|
|
//
|
|
// - Processor running at CPL=0,1,2 maps to U/S=0
|
|
// Processor running at CPL=3 maps to U/S=1
|
|
//
|
|
// - Pentium+ processors have separate TLB's for data and instruction caches
|
|
// - Pentium Pro+ processors maintain separate 4K and 4M TLBs.
|
|
#endif
|
|
|
|
#if BX_SUPPORT_PAGING
|
|
|
|
#define BX_INVALID_TLB_ENTRY 0xffffffff
|
|
|
|
#if BX_USE_QUICK_TLB_INVALIDATE
|
|
#define BX_MAX_TLB_INVALIDATE 0xffe
|
|
#endif
|
|
|
|
#define BX_USE_TLB_GENERATION 1
|
|
|
|
#if BX_CPU_LEVEL >= 4
|
|
# define BX_PRIV_CHECK_SIZE 32
|
|
#else
|
|
# define BX_PRIV_CHECK_SIZE 16
|
|
#endif
|
|
|
|
// The 'priv_check' array is used to decide if the current access
|
|
// has the proper paging permissions. An index is formed, based
|
|
// on parameters such as the access type and level, the write protect
|
|
// flag and values cached in the TLB. The format of the index into this
|
|
// array is:
|
|
//
|
|
// |4 |3 |2 |1 |0 |
|
|
// |wp|us|us|rw|rw|
|
|
// | | | | |
|
|
// | | | | +---> r/w of current access
|
|
// | | +--+------> u/s,r/w combined of page dir & table (cached)
|
|
// | +------------> u/s of current access
|
|
// +---------------> Current CR0.wp value
|
|
|
|
|
|
// Each entry in the TLB cache has 3 entries:
|
|
// lpf: Linear Page Frame (page aligned linear address of page)
|
|
// bits 32..12 Linear page frame.
|
|
// bits 11..0 Invalidate index.
|
|
// ppf: Physical Page Frame (page aligned phy address of page)
|
|
// accessBits:
|
|
// bits 32..11: Host Page Frame address used for direct access to
|
|
// the mem.vector[] space allocated for the guest physical
|
|
// memory. If this is zero, it means that a pointer
|
|
// to the host space could not be generated, likely because
|
|
// that page of memory is not standard memory (it might
|
|
// be memory mapped IO, ROM, etc).
|
|
// bits 9..10: (currently unused)
|
|
//
|
|
// bit 8: Page is a global page.
|
|
//
|
|
//
|
|
// The following 4 bits are used for a very efficient permissions
|
|
// check. The goal is to be able, using only the current privilege
|
|
// level and access type, to determine if the page tables allow the
|
|
// access to occur or at least should rewalk the page tables. On
|
|
// the first read access, permissions are set to only read, so a
|
|
// rewalk is necessary when a subsequent write fails the tests.
|
|
// This allows for the dirty bit to be set properly, but for the
|
|
// test to be efficient. Note that the CR0.WP flag is not present.
|
|
// The values in the following flags is based on the current CR0.WP
|
|
// value, necessitating a TLB flush when CR0.WP changes.
|
|
//
|
|
// The test is:
|
|
// OK = 1 << ( (W<<1) | U ) [W:1=write, 0=read, U:1=CPL3,0=CPL0-2]
|
|
//
|
|
// Thus for reads, it is:
|
|
// OK = 0x10 << ( U )
|
|
// And for writes:
|
|
// OK = 0x40 << ( U )
|
|
//
|
|
// bit 7: a Write from User privilege is OK
|
|
// bit 6: a Write from System privilege is OK
|
|
// bit 5: a Read from User privilege is OK
|
|
// bit 4: a Read from System privilege is OK
|
|
//
|
|
// And the lowest 4 bits are as above, except that they also indicate
|
|
// that hostPageAddr is valid, so we do not separately need to test
|
|
// that pointer against NULL. These have smaller constants for us
|
|
// to be able to use smaller encodings in the trace generators. Note
|
|
// that whenever bit n (n=0,1,2,3) is set, then also n+4 is set.
|
|
// (The opposite is of course not true)
|
|
//
|
|
// bit 3: a Write from User privilege is OK, hostPageAddr is valid
|
|
// bit 2: a Write from System privilege is OK, hostPageAddr is valid
|
|
// bit 1: a Read from User privilege is OK, hostPageAddr is valid
|
|
// bit 0: a Read from System privilege is OK, hostPageAddr is valid
|
|
//
|
|
|
|
#define TLB_GlobalPage 0x100
|
|
|
|
#define TLB_WriteUserOK 0x80
|
|
#define TLB_WriteSysOK 0x40
|
|
#define TLB_ReadUserOK 0x20
|
|
#define TLB_ReadSysOK 0x10
|
|
#define TLB_WriteUserPtrOK 0x08
|
|
#define TLB_WriteSysPtrOK 0x04
|
|
#define TLB_ReadUserPtrOK 0x02
|
|
#define TLB_ReadSysPtrOK 0x01
|
|
|
|
|
|
|
|
#ifdef __GNUC__
|
|
#warning "Move priv_check to CPU fields, or init.cc"
|
|
#endif
|
|
|
|
static unsigned priv_check[BX_PRIV_CHECK_SIZE];
|
|
|
|
|
|
#define PAGE_DIRECTORY_NX_BIT (BX_CONST64(0x8000000000000000))
|
|
|
|
|
|
// === TLB Instrumentation section ==============================
|
|
|
|
// Note: this is an approximation of what Peter Tattam had.
|
|
|
|
#define InstrumentTLB 0
|
|
|
|
#if InstrumentTLB
|
|
static unsigned tlbLookups=0;
|
|
static unsigned tlbMisses=0;
|
|
static unsigned tlbGlobalFlushes=0;
|
|
static unsigned tlbNonGlobalFlushes=0;
|
|
static unsigned tlbEntryFlushes=0;
|
|
static unsigned tlbEntryInvlpg=0;
|
|
|
|
#define InstrTLB_StatsMask 0xfffff
|
|
|
|
#define InstrTLB_Stats() {\
|
|
if ((tlbLookups & InstrTLB_StatsMask) == 0) { \
|
|
BX_INFO(("TLB lookup:%8d miss:%8d %6.2f%% flush:%8d %6.2f%%", \
|
|
tlbLookups, \
|
|
tlbMisses, \
|
|
tlbMisses * 100.0 / tlbLookups, \
|
|
(tlbGlobalFlushes+tlbNonGlobalFlushes), \
|
|
(tlbGlobalFlushes+tlbNonGlobalFlushes) * 100.0 / tlbLookups \
|
|
)); \
|
|
tlbLookups = tlbMisses = tlbGlobalFlushes = tlbNonGlobalFlushes = 0; \
|
|
} \
|
|
}
|
|
#define InstrTLB_Increment(v) (v)++
|
|
|
|
#else
|
|
#define InstrTLB_Stats()
|
|
#define InstrTLB_Increment(v)
|
|
#endif
|
|
|
|
// ==============================================================
|
|
|
|
|
|
void BX_CPP_AttrRegparmN(2)
|
|
BX_CPU_C::pagingCR0Changed(Bit32u oldCR0, Bit32u newCR0)
|
|
{
|
|
// Modification of PG,PE flushes TLB cache according to docs.
|
|
// Additionally, the TLB strategy is based on the current value of
|
|
// WP, so if that changes we must also flush the TLB.
|
|
if ( (oldCR0 & 0x80010001) != (newCR0 & 0x80010001) )
|
|
TLB_flush(1); // 1 = Flush Global entries also.
|
|
|
|
if (bx_dbg.paging)
|
|
BX_INFO(("pagingCR0Changed(0x%x -> 0x%x):", oldCR0, newCR0));
|
|
}
|
|
|
|
void BX_CPP_AttrRegparmN(2)
|
|
BX_CPU_C::pagingCR4Changed(Bit32u oldCR4, Bit32u newCR4)
|
|
{
|
|
// Modification of PGE,PAE,PSE flushes TLB cache according to docs.
|
|
if ( (oldCR4 & 0x000000b0) != (newCR4 & 0x000000b0) )
|
|
TLB_flush(1); // 1 = Flush Global entries also.
|
|
|
|
if (bx_dbg.paging)
|
|
BX_INFO(("pagingCR4Changed(0x%x -> 0x%x):", oldCR4, newCR4));
|
|
|
|
#if BX_SupportPAE
|
|
if ( (oldCR4 & 0x00000020) != (newCR4 & 0x00000020) ) {
|
|
if (BX_CPU_THIS_PTR cr4.get_PAE())
|
|
BX_CPU_THIS_PTR cr3_masked = BX_CPU_THIS_PTR cr3 & 0xffffffe0;
|
|
else
|
|
BX_CPU_THIS_PTR cr3_masked = BX_CPU_THIS_PTR cr3 & 0xfffff000;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void BX_CPP_AttrRegparmN(1)
|
|
BX_CPU_C::CR3_change(bx_address value)
|
|
{
|
|
if (bx_dbg.paging) {
|
|
BX_INFO(("CR3_change(): flush TLB cache"));
|
|
BX_INFO(("Page Directory Base %08x", (unsigned) value));
|
|
}
|
|
|
|
// flush TLB even if value does not change
|
|
TLB_flush(0); // 0 = Don't flush Global entries.
|
|
BX_CPU_THIS_PTR cr3 = value;
|
|
#if BX_SupportPAE
|
|
if (BX_CPU_THIS_PTR cr4.get_PAE())
|
|
BX_CPU_THIS_PTR cr3_masked = value & 0xffffffe0;
|
|
else
|
|
#endif
|
|
BX_CPU_THIS_PTR cr3_masked = value & 0xfffff000;
|
|
}
|
|
|
|
void
|
|
BX_CPU_C::pagingA20Changed(void)
|
|
{
|
|
TLB_flush(1); // 1 = Flush Global entries too.
|
|
}
|
|
|
|
void
|
|
BX_CPU_C::TLB_init(void)
|
|
{
|
|
// Called to initialize the TLB upon startup.
|
|
// Unconditional initialization of all TLB entries.
|
|
|
|
#if BX_USE_TLB
|
|
unsigned i;
|
|
unsigned wp, us_combined, rw_combined, us_current, rw_current;
|
|
|
|
for (i=0; i<BX_TLB_SIZE; i++)
|
|
BX_CPU_THIS_PTR TLB.entry[i].lpf = BX_INVALID_TLB_ENTRY;
|
|
|
|
//
|
|
// Setup privilege check matrix.
|
|
//
|
|
|
|
for (i=0; i<BX_PRIV_CHECK_SIZE; i++) {
|
|
wp = (i & 0x10) >> 4;
|
|
us_current = (i & 0x08) >> 3;
|
|
us_combined = (i & 0x04) >> 2;
|
|
rw_combined = (i & 0x02) >> 1;
|
|
rw_current = (i & 0x01) >> 0;
|
|
if (wp) { // when write protect on
|
|
if (us_current > us_combined) // user access, supervisor page
|
|
priv_check[i] = 0;
|
|
else if (rw_current > rw_combined) // RW access, RO page
|
|
priv_check[i] = 0;
|
|
else
|
|
priv_check[i] = 1;
|
|
}
|
|
else { // when write protect off
|
|
if (us_current == 0) // Supervisor mode access, anything goes
|
|
priv_check[i] = 1;
|
|
else {
|
|
// user mode access
|
|
if (us_combined == 0) // user access, supervisor Page
|
|
priv_check[i] = 0;
|
|
else if (rw_current > rw_combined) // RW access, RO page
|
|
priv_check[i] = 0;
|
|
else
|
|
priv_check[i] = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
#if BX_USE_QUICK_TLB_INVALIDATE
|
|
BX_CPU_THIS_PTR TLB.tlb_invalidate = BX_MAX_TLB_INVALIDATE;
|
|
#endif
|
|
|
|
#endif // #if BX_USE_TLB
|
|
}
|
|
|
|
void
|
|
BX_CPU_C::TLB_flush(bx_bool invalidateGlobal)
|
|
{
|
|
#if InstrumentTLB
|
|
if (invalidateGlobal)
|
|
InstrTLB_Increment(tlbGlobalFlushes);
|
|
else
|
|
InstrTLB_Increment(tlbNonGlobalFlushes);
|
|
#endif
|
|
|
|
#if BX_USE_TLB
|
|
for (unsigned i=0; i<BX_TLB_SIZE; i++) {
|
|
// To be conscious of the native cache line usage, only
|
|
// write to (invalidate) entries which need it.
|
|
bx_TLB_entry *tlbEntry = &BX_CPU_THIS_PTR TLB.entry[i];
|
|
if (tlbEntry->lpf != BX_INVALID_TLB_ENTRY) {
|
|
#if BX_SupportGlobalPages
|
|
if ( invalidateGlobal || !(tlbEntry->accessBits & TLB_GlobalPage) )
|
|
#endif
|
|
{
|
|
tlbEntry->lpf = BX_INVALID_TLB_ENTRY;
|
|
InstrTLB_Increment(tlbEntryFlushes); // A TLB entry flush occurred.
|
|
}
|
|
}
|
|
}
|
|
#endif // #if BX_USE_TLB
|
|
}
|
|
|
|
void BX_CPU_C::INVLPG(bxInstruction_c* i)
|
|
{
|
|
#if BX_CPU_LEVEL >= 4
|
|
bx_address laddr;
|
|
|
|
invalidate_prefetch_q();
|
|
|
|
// Operand must not be a register
|
|
if (i->modC0()) {
|
|
|
|
#if BX_SUPPORT_X86_64
|
|
|
|
//
|
|
// Opcode 0F 01:
|
|
//
|
|
|
|
// ----------------------------------------------------
|
|
// MOD REG RM | non 64 bit mode | 64 bit mode
|
|
// ----------------------------------------------------
|
|
// MOD <> 11 7 --- | INVLPG | INVLPG
|
|
// MOD == 11 7 0 | #UD | SWAPGS
|
|
// MOD == 11 7 1 | #UD | RDTSCP
|
|
// MOD == 11 7 2-7 | #UD | #UD
|
|
|
|
if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64) {
|
|
if (i->nnn() == 7) {
|
|
switch(i->rm()) {
|
|
case 0:
|
|
BX_CPU_THIS_PTR SWAPGS(i);
|
|
return;
|
|
case 1:
|
|
BX_CPU_THIS_PTR RDTSCP(i);
|
|
return;
|
|
default:
|
|
BX_INFO(("INVLPG: 0F 01 /7 RM=%d opcode is undefined !", i->rm()));
|
|
UndefinedOpcode(i);
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
BX_INFO(("INVLPG: op is a register"));
|
|
UndefinedOpcode(i);
|
|
}
|
|
|
|
// Can not be executed in v8086 mode
|
|
if (v8086_mode())
|
|
exception(BX_GP_EXCEPTION, 0, 0);
|
|
|
|
// Protected instruction: CPL0 only
|
|
if (BX_CPU_THIS_PTR cr0.pe) {
|
|
if (CPL!=0) {
|
|
exception(BX_GP_EXCEPTION, 0, 0);
|
|
}
|
|
}
|
|
|
|
#if BX_USE_TLB
|
|
laddr = BX_CPU_THIS_PTR get_segment_base(i->seg()) + RMAddr(i);
|
|
Bit32u TLB_index = BX_TLB_INDEX_OF(laddr);
|
|
BX_CPU_THIS_PTR TLB.entry[TLB_index].lpf = BX_INVALID_TLB_ENTRY;
|
|
InstrTLB_Increment(tlbEntryInvlpg);
|
|
#endif // BX_USE_TLB
|
|
|
|
BX_INSTR_TLB_CNTRL(BX_CPU_ID, BX_INSTR_INVLPG, 0);
|
|
|
|
#else
|
|
// not supported on < 486
|
|
BX_INFO(("INVLPG: required i486, use --enable-cpu=4 option"));
|
|
UndefinedOpcode(i);
|
|
#endif
|
|
}
|
|
|
|
// Translate a linear address to a physical address, for
|
|
// a data access (D)
|
|
|
|
Bit32u BX_CPP_AttrRegparmN(3)
|
|
BX_CPU_C::translate_linear(bx_address laddr, unsigned pl, unsigned rw, unsigned access_type)
|
|
{
|
|
bx_address lpf;
|
|
Bit32u accessBits, combined_access = 0, error_code = 0;
|
|
unsigned priv_index;
|
|
#if BX_USE_TLB
|
|
Bit32u TLB_index;
|
|
#endif
|
|
|
|
InstrTLB_Increment(tlbLookups);
|
|
InstrTLB_Stats();
|
|
|
|
// note - we assume physical memory < 4gig so for brevity & speed, we'll use
|
|
// 32 bit entries although cr3 is expanded to 64 bits.
|
|
Bit32u ppf, poffset, paddress;
|
|
|
|
bx_bool isWrite = (rw >= BX_WRITE); // write or r-m-w
|
|
|
|
#if BX_SupportPAE
|
|
if (BX_CPU_THIS_PTR cr4.get_PAE())
|
|
{
|
|
bx_address pde, pdp;
|
|
Bit32u pde_addr;
|
|
Bit32u pdp_addr;
|
|
|
|
lpf = laddr & BX_CONST64(0xfffffffffffff000); // linear page frame
|
|
poffset = laddr & 0x00000fff; // physical offset
|
|
|
|
#if BX_USE_TLB
|
|
TLB_index = BX_TLB_INDEX_OF(lpf);
|
|
bx_TLB_entry *tlbEntry = &BX_CPU_THIS_PTR TLB.entry[TLB_index];
|
|
|
|
if (tlbEntry->lpf == BX_TLB_LPF_VALUE(lpf))
|
|
{
|
|
paddress = tlbEntry->ppf | poffset;
|
|
accessBits = tlbEntry->accessBits;
|
|
|
|
if (accessBits & (0x10 << ((isWrite<<1) | pl)))
|
|
return(paddress);
|
|
|
|
// The current access does not have permission according to the info
|
|
// in our TLB cache entry. Re-walk the page tables, in case there is
|
|
// updated information in the memory image, and let the long path code
|
|
// generate an exception if one is warranted.
|
|
}
|
|
#endif
|
|
|
|
InstrTLB_Increment(tlbMisses);
|
|
|
|
#if BX_SUPPORT_X86_64
|
|
if (BX_CPU_THIS_PTR msr.lma)
|
|
{
|
|
bx_address pml4;
|
|
|
|
// Get PML4 entry
|
|
Bit32u pml4_addr = BX_CPU_THIS_PTR cr3_masked |
|
|
((laddr & BX_CONST64(0x0000ff8000000000)) >> 36);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pml4_addr, 8, &pml4);
|
|
|
|
if ( !(pml4 & 0x01) ) {
|
|
goto page_fault_not_present; // PML4 Entry NOT present
|
|
}
|
|
if (pml4 & PAGE_DIRECTORY_NX_BIT) {
|
|
if (! BX_CPU_THIS_PTR msr.nxe)
|
|
goto page_fault_reserved;
|
|
else if (access_type == CODE_ACCESS)
|
|
goto page_fault_access;
|
|
}
|
|
if ( !(pml4 & 0x20) )
|
|
{
|
|
pml4 |= 0x20;
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pml4_addr, 8, &pml4);
|
|
}
|
|
|
|
// Get PDP entry
|
|
pdp_addr = (pml4 & 0xfffff000) |
|
|
((laddr & BX_CONST64(0x0000007fc0000000)) >> 27);
|
|
}
|
|
else
|
|
#endif
|
|
{
|
|
pdp_addr = BX_CPU_THIS_PTR cr3_masked | ((laddr & 0xc0000000) >> 27);
|
|
}
|
|
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pdp_addr, sizeof(bx_address), &pdp);
|
|
|
|
if ( !(pdp & 0x01) ) {
|
|
goto page_fault_not_present; // PDP Entry NOT present
|
|
}
|
|
#if BX_SUPPORT_X86_64
|
|
if (BX_CPU_THIS_PTR msr.lma)
|
|
{
|
|
if (pdp & PAGE_DIRECTORY_NX_BIT) {
|
|
if (! BX_CPU_THIS_PTR msr.nxe)
|
|
goto page_fault_reserved;
|
|
else if (access_type == CODE_ACCESS)
|
|
goto page_fault_access;
|
|
}
|
|
}
|
|
#endif
|
|
if ( !(pdp & 0x20) ) {
|
|
pdp |= 0x20;
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pdp_addr, sizeof(bx_address), &pdp);
|
|
}
|
|
|
|
// Get page dir entry
|
|
pde_addr = (pdp & 0xfffff000) | ((laddr & 0x3fe00000) >> 18);
|
|
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pde_addr, sizeof(bx_address), &pde);
|
|
|
|
if ( !(pde & 0x01) ) {
|
|
goto page_fault_not_present; // Page Directory Entry NOT present
|
|
}
|
|
|
|
#if BX_SUPPORT_X86_64
|
|
if (pde & PAGE_DIRECTORY_NX_BIT) {
|
|
if (! BX_CPU_THIS_PTR msr.nxe)
|
|
goto page_fault_reserved;
|
|
else if (access_type == CODE_ACCESS)
|
|
goto page_fault_access;
|
|
}
|
|
#endif
|
|
|
|
#if BX_SUPPORT_4MEG_PAGES
|
|
// (KPL) Weird. I would think the processor would consult CR.PSE?
|
|
// if ((pde & 0x80) && (BX_CPU_THIS_PTR cr4.get_PSE())) {}
|
|
if (pde & 0x80) {
|
|
// 4M pages are enabled, and this is a 4Meg page.
|
|
|
|
// Combined access is just access from the pde (no pte involved).
|
|
combined_access = pde & 0x06; // U/S and R/W
|
|
// Make up the physical page frame address.
|
|
ppf = (pde & 0xffe00000) | (laddr & 0x001ff000);
|
|
|
|
#if BX_SupportGlobalPages
|
|
if (BX_CPU_THIS_PTR cr4.get_PGE()) { // PGE==1
|
|
combined_access |= (pde & TLB_GlobalPage); // G
|
|
}
|
|
#endif
|
|
|
|
priv_index =
|
|
#if BX_CPU_LEVEL >= 4
|
|
(BX_CPU_THIS_PTR cr0.wp<<4) | // bit 4
|
|
#endif
|
|
(pl<<3) | // bit 3
|
|
(combined_access & 0x06) | // bit 2,1
|
|
isWrite; // bit 0
|
|
|
|
if (!priv_check[priv_index]) goto page_fault_access;
|
|
|
|
// Update PDE if A/D bits if needed.
|
|
if ( ((pde & 0x20)==0) || (isWrite && ((pde&0x40)==0)) )
|
|
{
|
|
pde |= (0x20 | (isWrite<<6)); // Update A and possibly D bits
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pde_addr, sizeof(bx_address), &pde);
|
|
}
|
|
}
|
|
else
|
|
#endif
|
|
{ // 4k pages.
|
|
bx_address pte;
|
|
|
|
// Get page table entry
|
|
Bit32u pte_addr = (pde & 0xfffff000) | ((laddr & 0x001ff000) >> 9);
|
|
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pte_addr, sizeof(bx_address), &pte);
|
|
|
|
if ( !(pte & 0x01) ) {
|
|
goto page_fault_not_present;
|
|
}
|
|
|
|
#if BX_SUPPORT_X86_64
|
|
if (pte & PAGE_DIRECTORY_NX_BIT) {
|
|
if (! BX_CPU_THIS_PTR msr.nxe)
|
|
goto page_fault_reserved;
|
|
else if (access_type == CODE_ACCESS)
|
|
goto page_fault_access;
|
|
}
|
|
#endif
|
|
|
|
combined_access = (pde & pte) & 0x06; // U/S and R/W
|
|
|
|
// Make up the physical page frame address.
|
|
ppf = pte & 0xfffff000;
|
|
|
|
#if BX_SupportGlobalPages
|
|
if (BX_CPU_THIS_PTR cr4.get_PGE()) { // PGE==1
|
|
combined_access |= (pte & TLB_GlobalPage); // G
|
|
}
|
|
#endif
|
|
|
|
priv_index =
|
|
#if BX_CPU_LEVEL >= 4
|
|
(BX_CPU_THIS_PTR cr0.wp<<4) | // bit 4
|
|
#endif
|
|
(pl<<3) | // bit 3
|
|
(combined_access & 0x06) | // bit 2,1
|
|
isWrite; // bit 0
|
|
|
|
if (!priv_check[priv_index]) goto page_fault_access;
|
|
|
|
// Update PDE A bit if needed.
|
|
if ( (pde & 0x20)==0 ) {
|
|
pde |= 0x20; // Update A bit.
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pde_addr, sizeof(bx_address), &pde);
|
|
}
|
|
|
|
// Update PTE A/D bits if needed.
|
|
if (((pte & 0x20)==0) || (isWrite && ((pte&0x40)==0)))
|
|
{
|
|
pte |= (0x20 | (isWrite<<6)); // Update A and possibly D bits
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pte_addr, sizeof(bx_address), &pte);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
#endif // #if BX_SupportPAE
|
|
{
|
|
// CR4.PAE==0 (and MSR.LMA==0)
|
|
|
|
lpf = laddr & 0xfffff000; // linear page frame
|
|
poffset = laddr & 0x00000fff; // physical offset
|
|
|
|
#if BX_USE_TLB
|
|
TLB_index = BX_TLB_INDEX_OF(lpf);
|
|
bx_TLB_entry *tlbEntry = &BX_CPU_THIS_PTR TLB.entry[TLB_index];
|
|
|
|
if (tlbEntry->lpf == BX_TLB_LPF_VALUE(lpf))
|
|
{
|
|
paddress = tlbEntry->ppf | poffset;
|
|
accessBits = tlbEntry->accessBits;
|
|
|
|
if (accessBits & (0x10 << ((isWrite<<1) | pl)))
|
|
return(paddress);
|
|
|
|
// The current access does not have permission according to the info
|
|
// in our TLB cache entry. Re-walk the page tables, in case there is
|
|
// updated information in the memory image, and let the long path code
|
|
// generate an exception if one is warranted.
|
|
}
|
|
#endif
|
|
|
|
InstrTLB_Increment(tlbMisses);
|
|
|
|
Bit32u pde, pde_addr;
|
|
|
|
// Get page dir entry
|
|
pde_addr = BX_CPU_THIS_PTR cr3_masked | ((laddr & 0xffc00000) >> 20);
|
|
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pde_addr, 4, &pde);
|
|
|
|
if ( !(pde & 0x01) ) {
|
|
goto page_fault_not_present; // Page Directory Entry NOT present
|
|
}
|
|
|
|
#if BX_SUPPORT_4MEG_PAGES
|
|
if ((pde & 0x80) && (BX_CPU_THIS_PTR cr4.get_PSE()))
|
|
{
|
|
// 4M pages are enabled, and this is a 4Meg page.
|
|
// Note: when the PSE and PAE flags in CR4 are set,
|
|
// the processor generates a PF if the reserved bits are not
|
|
// set to 0. (We don't handle PAE yet, just a note for
|
|
// the future).
|
|
|
|
// Combined access is just access from the pde (no pte involved).
|
|
combined_access = pde & 0x006; // {US,RW}
|
|
// make up the physical frame number
|
|
ppf = (pde & 0xFFC00000) | (laddr & 0x003FF000);
|
|
|
|
#if BX_SupportGlobalPages
|
|
if (BX_CPU_THIS_PTR cr4.get_PGE()) { // PGE==1
|
|
combined_access |= pde & TLB_GlobalPage; // {G}
|
|
}
|
|
#endif
|
|
|
|
priv_index =
|
|
#if BX_CPU_LEVEL >= 4
|
|
(BX_CPU_THIS_PTR cr0.wp<<4) | // bit 4
|
|
#endif
|
|
(pl<<3) | // bit 3
|
|
(combined_access & 0x06) | // bit 2,1
|
|
isWrite; // bit 0
|
|
|
|
if (!priv_check[priv_index]) goto page_fault_access;
|
|
|
|
// Update PDE if A/D bits if needed.
|
|
if (((pde & 0x20)==0) || (isWrite && ((pde&0x40)==0)))
|
|
{
|
|
pde |= (0x20 | (isWrite<<6)); // Update A and possibly D bits
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pde_addr, 4, &pde);
|
|
}
|
|
}
|
|
else // Else normal 4Kbyte page...
|
|
#endif
|
|
{
|
|
Bit32u pte, pte_addr;
|
|
|
|
#if (BX_CPU_LEVEL < 6)
|
|
// update PDE if A bit was not set before
|
|
if ( !(pde & 0x20) ) {
|
|
pde |= 0x20;
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pde_addr, 4, &pde);
|
|
}
|
|
#endif
|
|
|
|
// Get page table entry
|
|
pte_addr = (pde & 0xfffff000) | ((laddr & 0x003ff000) >> 10);
|
|
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pte_addr, 4, &pte);
|
|
|
|
if ( !(pte & 0x01) ) {
|
|
goto page_fault_not_present; // Page Table Entry NOT present
|
|
}
|
|
|
|
// 386 and 486+ have different bahaviour for combining
|
|
// privilege from PDE and PTE.
|
|
#if BX_CPU_LEVEL == 3
|
|
combined_access = (pde | pte) & 0x04; // U/S
|
|
combined_access |= (pde & pte) & 0x02; // R/W
|
|
#else // 486+
|
|
combined_access = (pde & pte) & 0x06; // U/S and R/W
|
|
#if BX_SupportGlobalPages
|
|
if (BX_CPU_THIS_PTR cr4.get_PGE()) {
|
|
combined_access |= (pte & TLB_GlobalPage); // G
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
// Make up the physical page frame address.
|
|
ppf = pte & 0xfffff000;
|
|
|
|
priv_index =
|
|
#if BX_CPU_LEVEL >= 4
|
|
(BX_CPU_THIS_PTR cr0.wp<<4) | // bit 4
|
|
#endif
|
|
(pl<<3) | // bit 3
|
|
(combined_access & 0x06) | // bit 2,1
|
|
isWrite; // bit 0
|
|
|
|
if (!priv_check[priv_index]) goto page_fault_access;
|
|
|
|
#if (BX_CPU_LEVEL >= 6)
|
|
// update PDE if A bit was not set before
|
|
if ( !(pde & 0x20) ) {
|
|
pde |= 0x20;
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pde_addr, 4, &pde);
|
|
}
|
|
#endif
|
|
|
|
// Update PTE if A/D bits if needed.
|
|
if (((pte & 0x20)==0) || (isWrite && ((pte&0x40)==0)))
|
|
{
|
|
pte |= (0x20 | (isWrite<<6)); // Update A and possibly D bits
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pte_addr, 4, &pte);
|
|
}
|
|
}
|
|
}
|
|
|
|
// Calculate physical memory address and fill in TLB cache entry
|
|
paddress = ppf | poffset;
|
|
#if BX_USE_TLB
|
|
BX_CPU_THIS_PTR TLB.entry[TLB_index].lpf = BX_TLB_LPF_VALUE(lpf);
|
|
BX_CPU_THIS_PTR TLB.entry[TLB_index].ppf = ppf;
|
|
#endif
|
|
|
|
// b3: Write User OK
|
|
// b2: Write Sys OK
|
|
// b1: Read User OK
|
|
// b0: Read Sys OK
|
|
if ( combined_access & 4 ) { // User
|
|
// User priv; read from {user,sys} OK.
|
|
accessBits = (TLB_ReadUserOK | TLB_ReadSysOK);
|
|
if ( isWrite ) // Current operation is a write (Dirty bit updated)
|
|
{
|
|
if (combined_access & 2) {
|
|
// R/W access from {user,sys} OK.
|
|
accessBits |= (TLB_WriteUserOK | TLB_WriteSysOK);
|
|
}
|
|
else {
|
|
accessBits |= TLB_WriteSysOK; // read only page, only {sys} write allowed
|
|
}
|
|
}
|
|
}
|
|
else { // System
|
|
accessBits = TLB_ReadSysOK; // System priv; read from {sys} OK.
|
|
if ( isWrite ) { // Current operation is a write (Dirty bit updated)
|
|
accessBits |= TLB_WriteSysOK; // write from {sys} OK.
|
|
}
|
|
}
|
|
#if BX_SupportGlobalPages
|
|
accessBits |= combined_access & TLB_GlobalPage; // Global bit
|
|
#endif
|
|
#if BX_USE_TLB
|
|
#if BX_SupportGuest2HostTLB
|
|
// Attempt to get a host pointer to this physical page. Put that
|
|
// pointer in the TLB cache. Note if the request is vetoed, NULL
|
|
// will be returned, and it's OK to OR zero in anyways.
|
|
BX_CPU_THIS_PTR TLB.entry[TLB_index].hostPageAddr =
|
|
(bx_hostpageaddr_t) BX_CPU_THIS_PTR mem->getHostMemAddr(BX_CPU_THIS, A20ADDR(ppf), rw);
|
|
|
|
if (BX_CPU_THIS_PTR TLB.entry[TLB_index].hostPageAddr) {
|
|
// All access allowed also via direct pointer
|
|
accessBits |= (accessBits & 0xf0) >> 4;
|
|
}
|
|
#endif
|
|
BX_CPU_THIS_PTR TLB.entry[TLB_index].accessBits = accessBits;
|
|
#endif
|
|
|
|
return(paddress);
|
|
|
|
// error checking order - page not present, reserved bits, protection
|
|
#define ERROR_NOT_PRESENT 0x00
|
|
#define ERROR_PROTECTION 0x01
|
|
#define ERROR_RESERVED 0x08
|
|
#define ERROR_CODE_ACCESS 0x10
|
|
|
|
#if BX_SUPPORT_X86_64 // keep compiler happy
|
|
page_fault_reserved:
|
|
error_code |= ERROR_RESERVED; // RSVD = 1
|
|
#endif
|
|
|
|
page_fault_access:
|
|
error_code |= ERROR_PROTECTION; // P = 1
|
|
|
|
page_fault_not_present:
|
|
error_code |= (pl << 2) | (isWrite << 1);
|
|
#if BX_SUPPORT_X86_64
|
|
if (BX_CPU_THIS_PTR msr.nxe && (access_type == CODE_ACCESS))
|
|
error_code |= ERROR_CODE_ACCESS; // I/D = 1
|
|
#endif
|
|
BX_CPU_THIS_PTR cr2 = laddr;
|
|
// Invalidate TLB entry.
|
|
#if BX_USE_TLB
|
|
BX_CPU_THIS_PTR TLB.entry[TLB_index].lpf = BX_INVALID_TLB_ENTRY;
|
|
#endif
|
|
#if BX_EXTERNAL_DEBUGGER
|
|
#if BX_SUPPORT_X86_64
|
|
printf("page fault for address %08x%08x @ %08x%08x\n",
|
|
(Bit32u)(laddr >> 32),(Bit32u)(laddr & 0xffffffff),
|
|
(Bit32u)(RIP >> 32),(Bit32u)(RIP & 0xffffffff));
|
|
#else
|
|
printf("page fault for address %08x:%08x\n",
|
|
(Bit32u)(laddr >> 32),(Bit32u)(laddr & 0xffffffff));
|
|
#endif
|
|
#endif
|
|
exception(BX_PF_EXCEPTION, error_code, 0);
|
|
return(0); // keep compiler happy
|
|
}
|
|
|
|
Bit32u BX_CPP_AttrRegparmN(3)
|
|
BX_CPU_C::dtranslate_linear(bx_address laddr, unsigned pl, unsigned rw)
|
|
{
|
|
return translate_linear(laddr, pl, rw, DATA_ACCESS);
|
|
}
|
|
|
|
Bit32u BX_CPP_AttrRegparmN(2)
|
|
BX_CPU_C::itranslate_linear(bx_address laddr, unsigned pl)
|
|
{
|
|
return translate_linear(laddr, pl, BX_READ, CODE_ACCESS);
|
|
}
|
|
|
|
#if BX_DEBUGGER || BX_DISASM || BX_INSTRUMENTATION || BX_GDBSTUB
|
|
|
|
void BX_CPU_C::dbg_xlate_linear2phy(bx_address laddr, Bit32u *phy, bx_bool *valid)
|
|
{
|
|
bx_address lpf, poffset, paddress;
|
|
|
|
if (BX_CPU_THIS_PTR cr0.pg == 0) {
|
|
*phy = laddr;
|
|
*valid = 1;
|
|
return;
|
|
}
|
|
|
|
lpf = laddr & BX_CONST64(0xfffffffffffff000); // linear page frame
|
|
poffset = laddr & 0x00000fff; // physical offset
|
|
|
|
// see if page is in the TLB first
|
|
#if BX_USE_TLB
|
|
Bit32u TLB_index = BX_TLB_INDEX_OF(lpf);
|
|
bx_TLB_entry *tlbEntry = &BX_CPU_THIS_PTR TLB.entry[TLB_index];
|
|
|
|
if (tlbEntry->lpf == BX_TLB_LPF_VALUE(lpf)) {
|
|
paddress = tlbEntry->ppf | poffset;
|
|
*phy = paddress;
|
|
*valid = 1;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
if (BX_CPU_THIS_PTR cr4.get_PAE()) {
|
|
Bit64u pt_address;
|
|
int levels = 3;
|
|
#if BX_SUPPORT_X86_64
|
|
if (BX_CPU_THIS_PTR msr.lme)
|
|
levels = 4;
|
|
#endif
|
|
pt_address = BX_CPU_THIS_PTR cr3_masked;
|
|
Bit64u offset_mask = 0xfff;
|
|
for (int level = levels - 1; level >= 0; --level) {
|
|
Bit64u pte;
|
|
pt_address += 8 * ((laddr >> (12 + 9*level)) & 511);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pt_address, 8, &pte);
|
|
if (!(pte & 1))
|
|
goto page_fault;
|
|
pt_address = pte & BX_CONST64(0x000ffffffffff000);
|
|
if (level == 1 && (pte & 0x80)) { // PSE page
|
|
offset_mask = 0x1fffff;
|
|
break;
|
|
}
|
|
}
|
|
paddress = pt_address + (laddr & offset_mask);
|
|
} else { // not PAE
|
|
Bit32u pt_address;
|
|
pt_address = BX_CPU_THIS_PTR cr3_masked;
|
|
Bit32u offset_mask = 0xfff;
|
|
for (int level = 1; level >= 0; --level) {
|
|
Bit32u pte;
|
|
pt_address += 4 * ((laddr >> (12 + 10*level)) & 1023);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pt_address, 4, &pte);
|
|
if (!(pte & 1))
|
|
goto page_fault;
|
|
pt_address = pte & 0xfffff000;
|
|
if (level == 1 && (pte & 0x80)) { // PSE page
|
|
offset_mask = 0x3fffff;
|
|
break;
|
|
}
|
|
}
|
|
paddress = pt_address + (laddr & offset_mask);
|
|
}
|
|
|
|
*phy = paddress;
|
|
*valid = 1;
|
|
return;
|
|
|
|
page_fault:
|
|
*phy = 0;
|
|
*valid = 0;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
void BX_CPP_AttrRegparmN(3)
|
|
BX_CPU_C::access_linear(bx_address laddr, unsigned length, unsigned pl,
|
|
unsigned rw, void *data)
|
|
{
|
|
|
|
#if BX_X86_DEBUGGER
|
|
if ( BX_CPU_THIS_PTR dr7 & 0x000000ff ) {
|
|
// Only compare debug registers if any breakpoints are enabled
|
|
Bit32u dr6_bits;
|
|
unsigned opa, opb;
|
|
opa = BX_HWDebugMemRW; // Read or Write always compares vs 11b
|
|
if (rw==BX_READ) // only compares vs 11b
|
|
opb = opa;
|
|
else // BX_WRITE or BX_RW; also compare vs 01b
|
|
opb = BX_HWDebugMemW;
|
|
dr6_bits = hwdebug_compare(laddr, length, opa, opb);
|
|
if (dr6_bits) {
|
|
BX_CPU_THIS_PTR debug_trap |= dr6_bits;
|
|
BX_CPU_THIS_PTR async_event = 1;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
Bit32u pageOffset = laddr & 0x00000fff;
|
|
unsigned xlate_rw = rw;
|
|
if (rw==BX_RW) rw = BX_READ;
|
|
|
|
if (BX_CPU_THIS_PTR cr0.pg) {
|
|
/* check for reference across multiple pages */
|
|
if ( (pageOffset + length) <= 4096 ) {
|
|
// Access within single page.
|
|
BX_CPU_THIS_PTR address_xlation.paddress1 =
|
|
dtranslate_linear(laddr, pl, xlate_rw);
|
|
BX_CPU_THIS_PTR address_xlation.pages = 1;
|
|
|
|
if (rw == BX_READ) {
|
|
BX_INSTR_LIN_READ(BX_CPU_ID, laddr, BX_CPU_THIS_PTR address_xlation.paddress1, length);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1, length, data);
|
|
}
|
|
else {
|
|
BX_INSTR_LIN_WRITE(BX_CPU_ID, laddr, BX_CPU_THIS_PTR address_xlation.paddress1, length);
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1, length, data);
|
|
}
|
|
return;
|
|
}
|
|
else {
|
|
// access across 2 pages
|
|
BX_CPU_THIS_PTR address_xlation.paddress1 =
|
|
dtranslate_linear(laddr, pl, xlate_rw);
|
|
BX_CPU_THIS_PTR address_xlation.len1 = 4096 - pageOffset;
|
|
BX_CPU_THIS_PTR address_xlation.len2 = length -
|
|
BX_CPU_THIS_PTR address_xlation.len1;
|
|
BX_CPU_THIS_PTR address_xlation.pages = 2;
|
|
BX_CPU_THIS_PTR address_xlation.paddress2 =
|
|
dtranslate_linear(laddr + BX_CPU_THIS_PTR address_xlation.len1,
|
|
pl, xlate_rw);
|
|
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
if (rw == BX_READ) {
|
|
BX_INSTR_LIN_READ(BX_CPU_ID, laddr,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1, data);
|
|
BX_INSTR_LIN_READ(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2,
|
|
((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
|
|
}
|
|
else {
|
|
BX_INSTR_LIN_WRITE(BX_CPU_ID, laddr,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1);
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1, data);
|
|
BX_INSTR_LIN_WRITE(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2);
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2,
|
|
((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
|
|
}
|
|
|
|
#else // BX_BIG_ENDIAN
|
|
if (rw == BX_READ) {
|
|
BX_INSTR_LIN_READ(BX_CPU_ID, laddr,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1,
|
|
((Bit8u*)data) + (length - BX_CPU_THIS_PTR address_xlation.len1));
|
|
BX_INSTR_LIN_READ(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2, data);
|
|
}
|
|
else {
|
|
BX_INSTR_LIN_WRITE(BX_CPU_ID, laddr,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1);
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1,
|
|
((Bit8u*)data) + (length - BX_CPU_THIS_PTR address_xlation.len1));
|
|
BX_INSTR_LIN_WRITE(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2);
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2, data);
|
|
}
|
|
#endif
|
|
return;
|
|
}
|
|
}
|
|
else {
|
|
// Paging off.
|
|
if ( (pageOffset + length) <= 4096 ) {
|
|
// Access within single page.
|
|
BX_CPU_THIS_PTR address_xlation.paddress1 = laddr;
|
|
BX_CPU_THIS_PTR address_xlation.pages = 1;
|
|
if (rw == BX_READ) {
|
|
BX_INSTR_LIN_READ(BX_CPU_ID, laddr, laddr, length);
|
|
#if BX_SupportGuest2HostTLB
|
|
Bit32u tlbIndex = BX_TLB_INDEX_OF(laddr);
|
|
bx_TLB_entry *tlbEntry = &BX_CPU_THIS_PTR TLB.entry[tlbIndex];
|
|
Bit32u lpf = laddr & 0xfffff000;
|
|
|
|
if (tlbEntry->lpf == BX_TLB_LPF_VALUE(lpf)) {
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, laddr, length, data);
|
|
return;
|
|
}
|
|
// We haven't seen this page, or it's been bumped before.
|
|
|
|
tlbEntry->lpf = BX_TLB_LPF_VALUE(lpf);
|
|
tlbEntry->ppf = lpf;
|
|
// Request a direct write pointer so we can do either R or W.
|
|
tlbEntry->hostPageAddr = (bx_hostpageaddr_t)
|
|
BX_CPU_THIS_PTR mem->getHostMemAddr(BX_CPU_THIS, A20ADDR(lpf), BX_WRITE);
|
|
|
|
if (! tlbEntry->hostPageAddr) {
|
|
// Direct write vetoed. Try requesting only direct reads.
|
|
tlbEntry->hostPageAddr = (bx_hostpageaddr_t)
|
|
BX_CPU_THIS_PTR mem->getHostMemAddr(BX_CPU_THIS, A20ADDR(lpf), BX_READ);
|
|
if (tlbEntry->hostPageAddr) {
|
|
// Got direct read pointer OK.
|
|
tlbEntry->accessBits =
|
|
(TLB_ReadSysOK | TLB_ReadUserOK | TLB_ReadSysPtrOK | TLB_ReadUserPtrOK);
|
|
}
|
|
else
|
|
tlbEntry->accessBits = 0;
|
|
}
|
|
else {
|
|
// Got direct write pointer OK. Mark for any operation to succeed.
|
|
tlbEntry->accessBits =(TLB_ReadSysOK | TLB_ReadUserOK | TLB_WriteSysOK | TLB_WriteUserOK |
|
|
TLB_ReadSysPtrOK | TLB_ReadUserPtrOK | TLB_WriteSysPtrOK | TLB_WriteUserPtrOK);
|
|
}
|
|
#endif // BX_SupportGuest2HostTLB
|
|
|
|
// Let access fall through to the following for this iteration.
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, laddr, length, data);
|
|
}
|
|
else { // Write
|
|
BX_INSTR_LIN_WRITE(BX_CPU_ID, laddr, laddr, length);
|
|
#if BX_SupportGuest2HostTLB
|
|
Bit32u tlbIndex = BX_TLB_INDEX_OF(laddr);
|
|
bx_TLB_entry *tlbEntry = &BX_CPU_THIS_PTR TLB.entry[tlbIndex];
|
|
Bit32u lpf = laddr & 0xfffff000;
|
|
|
|
if (tlbEntry->lpf == BX_TLB_LPF_VALUE(lpf)) {
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, laddr, length, data);
|
|
return;
|
|
}
|
|
// We haven't seen this page, or it's been bumped before.
|
|
|
|
tlbEntry->lpf = BX_TLB_LPF_VALUE(lpf);
|
|
tlbEntry->ppf = lpf;
|
|
// TLB.entry[tlbIndex].ppf field not used for PG==0.
|
|
// Request a direct write pointer so we can do either R or W.
|
|
tlbEntry->hostPageAddr = (bx_hostpageaddr_t)
|
|
BX_CPU_THIS_PTR mem->getHostMemAddr(BX_CPU_THIS, A20ADDR(lpf), BX_WRITE);
|
|
|
|
if (tlbEntry->hostPageAddr) {
|
|
// Got direct write pointer OK. Mark for any operation to succeed.
|
|
tlbEntry->accessBits = (TLB_ReadSysOK | TLB_ReadUserOK | TLB_WriteSysOK | TLB_WriteUserOK |
|
|
TLB_ReadSysPtrOK | TLB_ReadUserPtrOK | TLB_WriteSysPtrOK | TLB_WriteUserPtrOK);
|
|
}
|
|
else
|
|
tlbEntry->accessBits = 0;
|
|
#endif // BX_SupportGuest2HostTLB
|
|
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, laddr, length, data);
|
|
}
|
|
}
|
|
else {
|
|
// Access spans two pages.
|
|
BX_CPU_THIS_PTR address_xlation.paddress1 = laddr;
|
|
BX_CPU_THIS_PTR address_xlation.len1 = 4096 - pageOffset;
|
|
BX_CPU_THIS_PTR address_xlation.len2 = length -
|
|
BX_CPU_THIS_PTR address_xlation.len1;
|
|
BX_CPU_THIS_PTR address_xlation.pages = 2;
|
|
BX_CPU_THIS_PTR address_xlation.paddress2 = laddr +
|
|
BX_CPU_THIS_PTR address_xlation.len1;
|
|
|
|
#ifdef BX_LITTLE_ENDIAN
|
|
if (rw == BX_READ) {
|
|
BX_INSTR_LIN_READ(BX_CPU_ID, laddr,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1, data);
|
|
BX_INSTR_LIN_READ(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2,
|
|
((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
|
|
}
|
|
else {
|
|
BX_INSTR_LIN_WRITE(BX_CPU_ID, laddr,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1);
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1, data);
|
|
BX_INSTR_LIN_WRITE(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2);
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2,
|
|
((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
|
|
}
|
|
|
|
#else // BX_BIG_ENDIAN
|
|
if (rw == BX_READ) {
|
|
BX_INSTR_LIN_READ(BX_CPU_ID, laddr,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1,
|
|
((Bit8u*)data) + (length - BX_CPU_THIS_PTR address_xlation.len1));
|
|
BX_INSTR_LIN_READ(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2);
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2, data);
|
|
}
|
|
else {
|
|
BX_INSTR_LIN_WRITE(BX_CPU_ID, laddr,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1);
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS,
|
|
BX_CPU_THIS_PTR address_xlation.paddress1,
|
|
BX_CPU_THIS_PTR address_xlation.len1,
|
|
((Bit8u*)data) + (length - BX_CPU_THIS_PTR address_xlation.len1));
|
|
BX_INSTR_LIN_WRITE(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2);
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS,
|
|
BX_CPU_THIS_PTR address_xlation.paddress2,
|
|
BX_CPU_THIS_PTR address_xlation.len2, data);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
|
|
#else // BX_SUPPORT_PAGING
|
|
|
|
// stub functions for non-support of paging
|
|
|
|
void
|
|
BX_CPU_C::CR3_change(Bit32u value32)
|
|
{
|
|
BX_INFO(("CR3_change(): flush TLB cache"));
|
|
BX_INFO(("Page Directory Base %08x", (unsigned) value32));
|
|
}
|
|
|
|
void
|
|
BX_CPU_C::access_linear(Bit32u laddr, unsigned length, unsigned pl,
|
|
unsigned rw, void *data)
|
|
{
|
|
/* perhaps put this check before all code which calls this function,
|
|
* so we don't have to here
|
|
*/
|
|
if (BX_CPU_THIS_PTR cr0.pg == 0) {
|
|
if (rw == BX_READ)
|
|
BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, laddr, length, data);
|
|
else
|
|
BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, laddr, length, data);
|
|
return;
|
|
}
|
|
|
|
BX_PANIC(("access_linear: paging not supported"));
|
|
}
|
|
|
|
void
|
|
BX_CPU_C::INVLPG(bxInstruction_c* i)
|
|
{}
|
|
|
|
#endif // BX_SUPPORT_PAGING
|