1006 lines
29 KiB
C++
1006 lines
29 KiB
C++
/////////////////////////////////////////////////////////////////////////
|
||
// $Id: apic.cc,v 1.114 2009-01-27 21:13:38 sshwarts Exp $
|
||
/////////////////////////////////////////////////////////////////////////
|
||
//
|
||
// Copyright (c) 2002 Zwane Mwaikambo, Stanislav Shwartsman
|
||
//
|
||
// This library is free software; you can redistribute it and/or
|
||
// modify it under the terms of the GNU Lesser General Public
|
||
// License as published by the Free Software Foundation; either
|
||
// version 2 of the License, or (at your option) any later version.
|
||
//
|
||
// This library is distributed in the hope that it will be useful,
|
||
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||
// Lesser General Public License for more details.
|
||
//
|
||
// You should have received a copy of the GNU Lesser General Public
|
||
// License along with this library; if not, write to the Free Software
|
||
// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||
//
|
||
/////////////////////////////////////////////////////////////////////////
|
||
|
||
#define NEED_CPU_REG_SHORTCUTS 1
|
||
#include "bochs.h"
|
||
#include "cpu.h"
|
||
#include "iodev/iodev.h"
|
||
|
||
#if BX_SUPPORT_APIC
|
||
|
||
#define LOG_THIS this->
|
||
|
||
#define APIC_BROADCAST_PHYSICAL_DESTINATION_MODE (APIC_MAX_ID)
|
||
|
||
#define BX_LAPIC_FIRST_VECTOR 0x10
|
||
#define BX_LAPIC_LAST_VECTOR 0xfe
|
||
|
||
///////////// APIC BUS /////////////
|
||
|
||
int apic_bus_deliver_interrupt(Bit8u vector, Bit8u dest, Bit8u delivery_mode, Bit8u dest_mode, bx_bool level, bx_bool trig_mode)
|
||
{
|
||
if(delivery_mode == APIC_DM_LOWPRI)
|
||
{
|
||
if(dest_mode == 0) {
|
||
// I/O subsytem initiated interrupt with lowest priority delivery
|
||
// mode is not supported in physical destination mode
|
||
// BX_ERROR(("Ignoring lowest priority interrupt in physical dest mode !"));
|
||
return 0;
|
||
}
|
||
else {
|
||
return apic_bus_deliver_lowest_priority(vector, dest, trig_mode, 0);
|
||
}
|
||
}
|
||
|
||
// determine destination local apics and deliver
|
||
if(dest_mode == 0) {
|
||
if(dest == APIC_BROADCAST_PHYSICAL_DESTINATION_MODE)
|
||
{
|
||
return apic_bus_broadcast_interrupt(vector, delivery_mode, trig_mode, APIC_MAX_ID);
|
||
}
|
||
else {
|
||
// the destination is single agent
|
||
for (unsigned i=0;i<BX_NUM_LOCAL_APICS;i++)
|
||
{
|
||
if(BX_CPU_APIC(i)->get_id() == dest) {
|
||
BX_CPU_APIC(i)->deliver(vector, delivery_mode, trig_mode);
|
||
return 1;
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
}
|
||
else {
|
||
// logical destination mode
|
||
if(dest == 0) return 0;
|
||
|
||
bx_bool interrupt_delivered = 0;
|
||
|
||
for (int i=0; i<BX_NUM_LOCAL_APICS; i++) {
|
||
if(BX_CPU_APIC(i)->match_logical_addr(dest)) {
|
||
BX_CPU_APIC(i)->deliver(vector, delivery_mode, trig_mode);
|
||
interrupt_delivered = 1;
|
||
}
|
||
}
|
||
|
||
return interrupt_delivered;
|
||
}
|
||
}
|
||
|
||
int apic_bus_deliver_lowest_priority(Bit8u vector, Bit8u dest, bx_bool trig_mode, bx_bool broadcast)
|
||
{
|
||
int i;
|
||
|
||
#ifndef BX_IMPLEMENT_XAPIC
|
||
// search for if focus processor exists
|
||
for (i=0; i<BX_NUM_LOCAL_APICS; i++) {
|
||
if(BX_CPU_APIC(i)->is_focus(vector)) {
|
||
BX_CPU_APIC(i)->deliver(vector, APIC_DM_LOWPRI, trig_mode);
|
||
return 1;
|
||
}
|
||
}
|
||
#endif
|
||
|
||
// focus processor not found, looking for lowest priority agent
|
||
int lowest_priority_agent = -1, lowest_priority = 0x100;
|
||
|
||
for (i=0; i<BX_NUM_LOCAL_APICS; i++) {
|
||
if(broadcast || BX_CPU_APIC(i)->match_logical_addr(dest)) {
|
||
#ifndef BX_IMPLEMENT_XAPIC
|
||
int priority = BX_CPU_APIC(i)->get_apr();
|
||
#else
|
||
int priority = BX_CPU_APIC(i)->get_tpr();
|
||
#endif
|
||
if(priority < lowest_priority) {
|
||
lowest_priority = priority;
|
||
lowest_priority_agent = i;
|
||
}
|
||
}
|
||
}
|
||
|
||
if(lowest_priority_agent >= 0)
|
||
{
|
||
BX_CPU_APIC(lowest_priority_agent)->deliver(vector, APIC_DM_LOWPRI, trig_mode);
|
||
return 1;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
int apic_bus_broadcast_interrupt(Bit8u vector, Bit8u delivery_mode, bx_bool trig_mode, int exclude_cpu)
|
||
{
|
||
if(delivery_mode == APIC_DM_LOWPRI)
|
||
{
|
||
return apic_bus_deliver_lowest_priority(vector, 0 /* doesn't matter */, trig_mode, 1);
|
||
}
|
||
|
||
// deliver to all bus agents except 'exclude_cpu'
|
||
for (int i=0; i<BX_NUM_LOCAL_APICS; i++) {
|
||
if(i == exclude_cpu) continue;
|
||
BX_CPU_APIC(i)->deliver(vector, delivery_mode, trig_mode);
|
||
}
|
||
|
||
return 1;
|
||
}
|
||
|
||
static void apic_bus_broadcast_eoi(Bit8u vector)
|
||
{
|
||
bx_devices.ioapic->receive_eoi(vector);
|
||
}
|
||
|
||
#endif
|
||
|
||
// available even if APIC is not compiled in
|
||
void apic_bus_deliver_smi(void)
|
||
{
|
||
BX_CPU(0)->deliver_SMI();
|
||
}
|
||
|
||
void apic_bus_broadcast_smi(void)
|
||
{
|
||
for (unsigned i=0; i<BX_SMP_PROCESSORS; i++)
|
||
BX_CPU(i)->deliver_SMI();
|
||
}
|
||
|
||
#if BX_SUPPORT_APIC
|
||
|
||
////////////////////////////////////
|
||
|
||
bx_generic_apic_c::bx_generic_apic_c(bx_phy_address base)
|
||
{
|
||
put("APIC?");
|
||
id = APIC_UNKNOWN_ID;
|
||
set_base(base);
|
||
}
|
||
|
||
void bx_generic_apic_c::set_base(bx_phy_address newbase)
|
||
{
|
||
newbase &= (~0xfff);
|
||
base_addr = newbase;
|
||
if (id != APIC_UNKNOWN_ID)
|
||
BX_INFO(("relocate APIC id=%d to 0x" FMT_PHY_ADDRX, id, newbase));
|
||
}
|
||
|
||
void bx_generic_apic_c::set_id(Bit8u newid)
|
||
{
|
||
BX_INFO(("set APIC ID to %d", newid));
|
||
id = newid;
|
||
}
|
||
|
||
bx_bool bx_generic_apic_c::is_selected(bx_phy_address addr, unsigned len)
|
||
{
|
||
if((addr & ~0xfff) == get_base()) {
|
||
if((addr & 0xf) != 0)
|
||
BX_INFO(("warning: misaligned APIC access. addr=0x" FMT_PHY_ADDRX ", len=%d", addr, len));
|
||
return 1;
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
void bx_generic_apic_c::read(bx_phy_address addr, void *data, unsigned len)
|
||
{
|
||
if((addr & ~0x3) != ((addr+len-1) & ~0x3)) {
|
||
BX_PANIC(("APIC read at address 0x" FMT_PHY_ADDRX " spans 32-bit boundary !", addr));
|
||
return;
|
||
}
|
||
Bit32u value;
|
||
read_aligned(addr & ~0x3, &value);
|
||
if(len == 4) { // must be 32-bit aligned
|
||
*((Bit32u *)data) = value;
|
||
return;
|
||
}
|
||
// handle partial read, independent of endian-ness
|
||
value >>= (addr&3)*8;
|
||
if (len == 1)
|
||
*((Bit8u *) data) = value & 0xff;
|
||
else if (len == 2)
|
||
*((Bit16u *)data) = value & 0xffff;
|
||
else
|
||
BX_PANIC(("Unsupported APIC read at address 0x" FMT_PHY_ADDRX ", len=%d", addr, len));
|
||
}
|
||
|
||
void bx_generic_apic_c::write(bx_phy_address addr, void *data, unsigned len)
|
||
{
|
||
if((addr & ~0x3) != ((addr+len-1) & ~0x3)) {
|
||
BX_PANIC(("APIC write at address 0x" FMT_PHY_ADDRX " spans 32-bit boundary !", addr));
|
||
return;
|
||
}
|
||
bx_phy_address addr_aligned = addr & ~0x3;
|
||
if(len == 4) { // must be 32-bit aligned
|
||
write_aligned(addr_aligned, (Bit32u*) data);
|
||
return;
|
||
}
|
||
// partial write to the apic register, need to update some bytes
|
||
// and do not touch the others, i.e. to do RMW operation
|
||
Bit32u value;
|
||
read_aligned(addr_aligned, &value); // apic read has no side effects
|
||
// handle partial write, independent of endian-ness
|
||
unsigned shift = (addr&3)*8;
|
||
if (len == 1) {
|
||
value &= ~(0xff << shift);
|
||
value |= (*((Bit8u *) data) << shift);
|
||
}
|
||
else if (len == 2) {
|
||
value &= ~(0xffff << shift);
|
||
value |= (*((Bit16u *)data) << shift);
|
||
}
|
||
else {
|
||
BX_PANIC(("Unsupported APIC write at address 0x" FMT_PHY_ADDRX ", len=%d", addr, len));
|
||
}
|
||
write_aligned(addr_aligned, &value);
|
||
}
|
||
|
||
bx_local_apic_c::bx_local_apic_c(BX_CPU_C *mycpu)
|
||
: bx_generic_apic_c(BX_LAPIC_BASE_ADDR), cpu(mycpu), cpu_id(cpu->which_cpu())
|
||
{
|
||
// KPL: Register a non-active timer for use when the timer is started.
|
||
timer_handle = bx_pc_system.register_timer_ticks(this,
|
||
BX_CPU(0)->local_apic.periodic_smf, 0, 0, 0, "lapic");
|
||
timer_active = 0;
|
||
|
||
reset(BX_RESET_HARDWARE);
|
||
|
||
INTR = 0;
|
||
}
|
||
|
||
void bx_local_apic_c::reset(unsigned type)
|
||
{
|
||
UNUSED(type);
|
||
|
||
/* same as INIT but also sets arbitration ID and APIC ID */
|
||
init();
|
||
}
|
||
|
||
void bx_local_apic_c::init()
|
||
{
|
||
int i;
|
||
|
||
bx_generic_apic_c::init();
|
||
|
||
BX_INFO(("local apic in %s initializing",
|
||
(cpu && cpu->name) ? cpu->name : "?"));
|
||
|
||
// default address for a local APIC, can be moved
|
||
base_addr = BX_LAPIC_BASE_ADDR;
|
||
error_status = shadow_error_status = 0;
|
||
log_dest = 0;
|
||
dest_format = 0xf;
|
||
icr_hi = 0;
|
||
icr_lo = 0;
|
||
task_priority = 0;
|
||
|
||
for(i=0; i<BX_LAPIC_MAX_INTS; i++) {
|
||
irr[i] = isr[i] = tmr[i] = 0;
|
||
}
|
||
|
||
timer_divconf = 0;
|
||
timer_divide_factor = 1;
|
||
timer_initial = 0;
|
||
timer_current = 0;
|
||
|
||
if(timer_active) {
|
||
bx_pc_system.deactivate_timer(timer_handle);
|
||
timer_active = 0;
|
||
}
|
||
|
||
for(i=0; i<APIC_LVT_ENTRIES; i++) {
|
||
lvt[i] = 0x10000; // all LVT are masked
|
||
}
|
||
|
||
spurious_vector = 0xff; // software disabled(bit 8)
|
||
software_enabled = 0;
|
||
focus_disable = 0;
|
||
}
|
||
|
||
void bx_local_apic_c::set_id(Bit8u newid)
|
||
{
|
||
bx_generic_apic_c::set_id(newid);
|
||
sprintf(cpu->name, "CPU apicid=%02x",(Bit32u)id);
|
||
if(id < APIC_MAX_ID) {
|
||
char buffer[16];
|
||
sprintf(buffer, "APIC%x", id);
|
||
put(buffer);
|
||
sprintf(buffer, "CPU%x", id);
|
||
cpu->put(buffer);
|
||
} else {
|
||
BX_INFO(("naming convention for apics requires id=0-%d only", APIC_MAX_ID));
|
||
}
|
||
if(BX_CPU_LEVEL<2)
|
||
BX_INFO(("8086"));
|
||
else
|
||
BX_INFO(("80%d86", BX_CPU_LEVEL));
|
||
}
|
||
|
||
// APIC write: 4 byte write to 16-byte aligned APIC address
|
||
void bx_local_apic_c::write_aligned(bx_phy_address addr, Bit32u *data)
|
||
{
|
||
BX_DEBUG(("%s: LAPIC write 0x" FMT_PHY_ADDRX " to address %08x", cpu->name, *data, addr));
|
||
BX_ASSERT((addr & 0xf) == 0);
|
||
Bit32u apic_reg = addr & 0xff0;
|
||
Bit32u value = *data;
|
||
switch(apic_reg) {
|
||
case 0x20: // local APIC id
|
||
id = (value>>24) & APIC_ID_MASK;
|
||
break;
|
||
case 0x80: // task priority
|
||
set_tpr(value & 0xff);
|
||
break;
|
||
case 0xb0: // EOI
|
||
receive_EOI(value);
|
||
break;
|
||
case 0xd0: // logical destination
|
||
log_dest = (value >> 24) & APIC_ID_MASK;
|
||
BX_DEBUG(("set logical destination to %02x", log_dest));
|
||
break;
|
||
case 0xe0: // destination format
|
||
dest_format = (value >> 28) & 0xf;
|
||
BX_DEBUG(("set destination format to %02x", dest_format));
|
||
break;
|
||
case 0xf0: // spurious interrupt vector
|
||
write_spurious_interrupt_register(value);
|
||
break;
|
||
case 0x280: // error status reg
|
||
// Here's what the IA-devguide-3 says on p.7-45:
|
||
// The ESR is a read/write register and is reset after being written to
|
||
// by the processor. A write to the ESR must be done just prior to
|
||
// reading the ESR to allow the register to be updated.
|
||
error_status = shadow_error_status;
|
||
shadow_error_status = 0;
|
||
break;
|
||
case 0x300: // interrupt command reg 0-31
|
||
icr_lo = value & ~(1<<12); // force delivery status bit = 0(idle)
|
||
send_ipi();
|
||
break;
|
||
case 0x310: // interrupt command reg 31-63
|
||
icr_hi = value & 0xff000000;
|
||
break;
|
||
case 0x320: // LVT Timer Reg
|
||
lvt[APIC_LVT_TIMER] = value & 0x300ff;
|
||
if(! software_enabled) lvt[APIC_LVT_TIMER] |= 0x10000;
|
||
break;
|
||
case 0x330: // LVT Thermal Monitor
|
||
lvt[APIC_LVT_THERMAL] = value & 0x107ff;
|
||
if(! software_enabled) lvt[APIC_LVT_THERMAL] |= 0x10000;
|
||
break;
|
||
case 0x340: // LVT Performance Counter
|
||
lvt[APIC_LVT_PERFORM] = value & 0x107ff;
|
||
if(! software_enabled) lvt[APIC_LVT_PERFORM] |= 0x10000;
|
||
break;
|
||
case 0x350: // LVT LINT0 Reg
|
||
lvt[APIC_LVT_LINT0] = value & 0x1a7ff;
|
||
if(! software_enabled) lvt[APIC_LVT_LINT0] |= 0x10000;
|
||
break;
|
||
case 0x360: // LVT Lint1 Reg
|
||
lvt[APIC_LVT_LINT1] = value & 0x1a7ff;
|
||
if(! software_enabled) lvt[APIC_LVT_LINT1] |= 0x10000;
|
||
break;
|
||
case 0x370: // LVT Error Reg
|
||
lvt[APIC_LVT_ERROR] = value & 0x100ff;
|
||
if(! software_enabled) lvt[APIC_LVT_ERROR] |= 0x10000;
|
||
break;
|
||
case 0x380: // initial count for timer
|
||
set_initial_timer_count(value);
|
||
break;
|
||
case 0x3e0: // timer divide configuration
|
||
// only bits 3, 1, and 0 are writable
|
||
timer_divconf = value & 0xb;
|
||
set_divide_configuration(timer_divconf);
|
||
break;
|
||
/* all read-only registers go here */
|
||
case 0x30: // local APIC version
|
||
case 0x90: // arbitration priority
|
||
case 0xa0: // processor priority
|
||
// ISRs not writable
|
||
case 0x100: case 0x110: case 0x120: case 0x130:
|
||
case 0x140: case 0x150: case 0x160: case 0x170:
|
||
// TMRs not writable
|
||
case 0x180: case 0x190: case 0x1a0: case 0x1b0:
|
||
case 0x1c0: case 0x1d0: case 0x1e0: case 0x1f0:
|
||
// IRRs not writable
|
||
case 0x200: case 0x210: case 0x220: case 0x230:
|
||
case 0x240: case 0x250: case 0x260: case 0x270:
|
||
// current count for timer
|
||
case 0x390:
|
||
// all read-only registers should fall into this line
|
||
BX_INFO(("warning: write to read-only APIC register 0x%x", apic_reg));
|
||
break;
|
||
default:
|
||
shadow_error_status |= APIC_ERR_ILLEGAL_ADDR;
|
||
// but for now I want to know about it in case I missed some.
|
||
BX_PANIC(("APIC register %x not implemented", apic_reg));
|
||
}
|
||
}
|
||
|
||
void bx_local_apic_c::send_ipi(void)
|
||
{
|
||
int dest = (icr_hi >> 24) & 0xff;
|
||
int dest_shorthand = (icr_lo >> 18) & 3;
|
||
int trig_mode = (icr_lo >> 15) & 1;
|
||
int level = (icr_lo >> 14) & 1;
|
||
int dest_mode = (icr_lo >> 11) & 1;
|
||
int delivery_mode = (icr_lo >> 8) & 7;
|
||
int vector = (icr_lo & 0xff);
|
||
int accepted = 0;
|
||
|
||
if(delivery_mode == APIC_DM_INIT)
|
||
{
|
||
if(level == 0 && trig_mode == 1) {
|
||
// special mode in local apic. See "INIT Level Deassert" in the
|
||
// Intel Soft. Devel. Guide Vol 3, page 7-34. This magic code
|
||
// causes all APICs(regardless of dest address) to set their
|
||
// arbitration ID to their APIC ID. Not supported by Pentium 4
|
||
// and Intel Xeon processors.
|
||
return; // we not model APIC bus arbitration ID anyway
|
||
}
|
||
}
|
||
|
||
switch(dest_shorthand) {
|
||
case 0: // no shorthand, use real destination value
|
||
accepted = apic_bus_deliver_interrupt(vector, dest, delivery_mode, dest_mode, level, trig_mode);
|
||
break;
|
||
case 1: // self
|
||
trigger_irq(vector, trig_mode);
|
||
accepted = 1;
|
||
break;
|
||
case 2: // all including self
|
||
accepted = apic_bus_broadcast_interrupt(vector, delivery_mode, trig_mode, APIC_MAX_ID);
|
||
break;
|
||
case 3: // all but self
|
||
accepted = apic_bus_broadcast_interrupt(vector, delivery_mode, trig_mode, get_id());
|
||
break;
|
||
default:
|
||
BX_PANIC(("Invalid desination shorthand %#x\n", dest_shorthand));
|
||
}
|
||
|
||
if(! accepted) {
|
||
BX_DEBUG(("An IPI wasn't accepted, raise APIC_ERR_TX_ACCEPT_ERR"));
|
||
shadow_error_status |= APIC_ERR_TX_ACCEPT_ERR;
|
||
}
|
||
}
|
||
|
||
void bx_local_apic_c::write_spurious_interrupt_register(Bit32u value)
|
||
{
|
||
BX_DEBUG(("write of %08x to spurious interrupt register", value));
|
||
|
||
#ifdef BX_IMPLEMENT_XAPIC
|
||
spurious_vector = value & 0xff;
|
||
#else
|
||
// bits 0-3 of the spurious vector hardwired to '1
|
||
spurious_vector = (value & 0xf0) | 0xf;
|
||
#endif
|
||
|
||
software_enabled = (value >> 8) & 1;
|
||
focus_disable = (value >> 9) & 1;
|
||
|
||
if(! software_enabled) {
|
||
for(unsigned i=0; i<APIC_LVT_ENTRIES; i++) {
|
||
lvt[i] |= 0x10000; // all LVT are masked
|
||
}
|
||
}
|
||
}
|
||
|
||
void bx_local_apic_c::receive_EOI(Bit32u value)
|
||
{
|
||
BX_DEBUG(("%s: Wrote 0x%x to EOI", cpu->name, value));
|
||
int vec = highest_priority_int(isr);
|
||
if(vec < 0) {
|
||
BX_DEBUG(("EOI written without any bit in ISR"));
|
||
} else {
|
||
if ((Bit32u) vec != spurious_vector) {
|
||
BX_DEBUG(("%s: local apic received EOI, hopefully for vector 0x%02x", cpu->name, vec));
|
||
isr[vec] = 0;
|
||
if(tmr[vec]) {
|
||
apic_bus_broadcast_eoi(vec);
|
||
tmr[vec] = 0;
|
||
}
|
||
service_local_apic();
|
||
}
|
||
}
|
||
|
||
if(bx_dbg.apic) print_status();
|
||
}
|
||
|
||
void bx_local_apic_c::startup_msg(Bit32u vector)
|
||
{
|
||
cpu->deliver_SIPI(vector);
|
||
}
|
||
|
||
// APIC read: 4 byte read from 16-byte aligned APIC address
|
||
void bx_local_apic_c::read_aligned(bx_phy_address addr, Bit32u *data)
|
||
{
|
||
BX_DEBUG(("%s: LAPIC read from address 0x" FMT_PHY_ADDRX, cpu->name, addr));
|
||
BX_ASSERT((addr & 0xf) == 0);
|
||
*data = 0; // default value for unimplemented registers
|
||
bx_phy_address apic_reg = addr & 0xff0;
|
||
switch(apic_reg) {
|
||
case 0x20: // local APIC id
|
||
*data = (id) << 24; break;
|
||
case 0x30: // local APIC version
|
||
*data = BX_LAPIC_VERSION_ID; break;
|
||
case 0x80: // task priority
|
||
*data = task_priority & 0xff; break;
|
||
case 0x90: // arbitration priority
|
||
*data = get_apr(); break;
|
||
case 0xa0: // processor priority
|
||
*data = get_ppr(); break;
|
||
case 0xb0: // EOI
|
||
/*
|
||
* Read-modify-write operations should operate without generating
|
||
* exceptions, and are used by some operating systems to EOI.
|
||
* The results of reads should be ignored by the OS.
|
||
*/
|
||
break;
|
||
case 0xd0: // logical destination
|
||
*data = (log_dest & APIC_ID_MASK) << 24; break;
|
||
case 0xe0: // destination format
|
||
*data = ((dest_format & 0xf) << 24) | 0x0fffffff; break;
|
||
case 0xf0: // spurious interrupt vector
|
||
{
|
||
Bit32u reg = spurious_vector;
|
||
if(software_enabled) reg |= 0x100;
|
||
if(focus_disable) reg |= 0x200;
|
||
*data = reg;
|
||
}
|
||
break;
|
||
case 0x100: case 0x110:
|
||
case 0x120: case 0x130:
|
||
case 0x140: case 0x150:
|
||
case 0x160: case 0x170:
|
||
{
|
||
unsigned index = (apic_reg - 0x100) << 1;
|
||
Bit32u value = 0, mask = 1;
|
||
for(int i=0;i<32;i++) {
|
||
if(isr[index+i]) value |= mask;
|
||
mask <<= 1;
|
||
}
|
||
*data = value;
|
||
}
|
||
break;
|
||
case 0x180: case 0x190:
|
||
case 0x1a0: case 0x1b0:
|
||
case 0x1c0: case 0x1d0:
|
||
case 0x1e0: case 0x1f0:
|
||
{
|
||
unsigned index = (apic_reg - 0x180) << 1;
|
||
Bit32u value = 0, mask = 1;
|
||
for(int i=0;i<32;i++) {
|
||
if(tmr[index+i]) value |= mask;
|
||
mask <<= 1;
|
||
}
|
||
*data = value;
|
||
}
|
||
break;
|
||
case 0x200: case 0x210:
|
||
case 0x220: case 0x230:
|
||
case 0x240: case 0x250:
|
||
case 0x260: case 0x270:
|
||
{
|
||
unsigned index = (apic_reg - 0x200) << 1;
|
||
Bit32u value = 0, mask = 1;
|
||
for(int i=0;i<32;i++) {
|
||
if(irr[index+i]) value |= mask;
|
||
mask <<= 1;
|
||
}
|
||
*data = value;
|
||
}
|
||
break;
|
||
case 0x280: // error status reg
|
||
*data = error_status; break;
|
||
case 0x300: // interrupt command reg 0-31
|
||
*data = icr_lo; break;
|
||
case 0x310: // interrupt command reg 31-63
|
||
*data = icr_hi; break;
|
||
case 0x320: // LVT Timer Reg
|
||
case 0x330: // LVT Thermal Monitor
|
||
case 0x340: // LVT Performance Counter
|
||
case 0x350: // LVT LINT0 Reg
|
||
case 0x360: // LVT Lint1 Reg
|
||
case 0x370: // LVT Error Reg
|
||
{
|
||
int index = (apic_reg - 0x320) >> 4;
|
||
*data = lvt[index];
|
||
break;
|
||
}
|
||
case 0x380: // initial count for timer
|
||
*data = timer_initial;
|
||
break;
|
||
case 0x390: // current count for timer
|
||
if(timer_active==0) {
|
||
*data = timer_current;
|
||
} else {
|
||
Bit64u delta64 = (bx_pc_system.time_ticks() - ticksInitial) / timer_divide_factor;
|
||
Bit32u delta32 = (Bit32u) delta64;
|
||
if(delta32 > timer_initial)
|
||
BX_PANIC(("APIC: R(curr timer count): delta < initial"));
|
||
timer_current = timer_initial - delta32;
|
||
*data = timer_current;
|
||
}
|
||
break;
|
||
case 0x3e0: // timer divide configuration
|
||
*data = timer_divconf;
|
||
break;
|
||
default:
|
||
BX_INFO(("APIC register %08x not implemented", apic_reg));
|
||
}
|
||
|
||
BX_DEBUG(("%s: read from APIC address 0x" FMT_PHY_ADDRX " = %08x", cpu->name, addr, *data));
|
||
}
|
||
|
||
int bx_local_apic_c::highest_priority_int(Bit8u *array)
|
||
{
|
||
for(int i=BX_LAPIC_LAST_VECTOR; i>=BX_LAPIC_FIRST_VECTOR; i--)
|
||
if(array[i]) return i;
|
||
|
||
return -1;
|
||
}
|
||
|
||
void bx_local_apic_c::service_local_apic(void)
|
||
{
|
||
if(bx_dbg.apic) {
|
||
BX_INFO(("service_local_apic()"));
|
||
print_status();
|
||
}
|
||
if(INTR) return; // INTR already up; do nothing
|
||
// find first interrupt in irr.
|
||
int first_irr = highest_priority_int(irr);
|
||
if (first_irr < 0) return; // no interrupts, leave INTR=0
|
||
int first_isr = highest_priority_int(isr);
|
||
if (first_isr >= 0 && first_irr <= first_isr) {
|
||
BX_DEBUG(("local apic(%s): not delivering int 0x%02x because int 0x%02x is in service", cpu->name, first_irr, first_isr));
|
||
return;
|
||
}
|
||
if(((Bit32u)(first_irr) & 0xf0) <= (task_priority & 0xf0)) {
|
||
BX_DEBUG(("local apic(%s): not delivering int 0x%02X because task_priority is 0x%02X", cpu->name, first_irr, task_priority));
|
||
return;
|
||
}
|
||
// interrupt has appeared in irr. Raise INTR. When the CPU
|
||
// acknowledges, we will run highest_priority_int again and
|
||
// return it.
|
||
BX_DEBUG(("service_local_apic(): setting INTR=1 for vector 0x%02x", first_irr));
|
||
INTR = 1;
|
||
cpu->async_event = 1;
|
||
}
|
||
|
||
bx_bool bx_local_apic_c::deliver(Bit8u vector, Bit8u delivery_mode, Bit8u trig_mode)
|
||
{
|
||
switch(delivery_mode) {
|
||
case APIC_DM_FIXED:
|
||
case APIC_DM_LOWPRI:
|
||
BX_DEBUG(("Deliver lowest priority of fixed interrupt vector %02x", vector));
|
||
trigger_irq(vector, trig_mode);
|
||
break;
|
||
case APIC_DM_SMI:
|
||
BX_INFO(("Deliver SMI"));
|
||
cpu->deliver_SMI();
|
||
return 1;
|
||
case APIC_DM_NMI:
|
||
BX_INFO(("Deliver NMI"));
|
||
cpu->deliver_NMI();
|
||
return 1;
|
||
case APIC_DM_INIT:
|
||
BX_INFO(("Deliver INIT IPI"));
|
||
cpu->deliver_INIT();
|
||
break;
|
||
case APIC_DM_SIPI:
|
||
BX_DEBUG(("Deliver Start Up IPI"));
|
||
startup_msg(vector);
|
||
break;
|
||
case APIC_DM_EXTINT:
|
||
BX_DEBUG(("Deliver EXTINT vector %02x", vector));
|
||
trigger_irq(vector, trig_mode, 1);
|
||
break;
|
||
default:
|
||
return 0;
|
||
}
|
||
|
||
return 1;
|
||
}
|
||
|
||
void bx_local_apic_c::trigger_irq(unsigned vector, unsigned trigger_mode, bx_bool bypass_irr_isr)
|
||
{
|
||
BX_DEBUG(("Local apic on %s: trigger interrupt vector=0x%x", cpu->name, vector));
|
||
|
||
if(vector > BX_LAPIC_LAST_VECTOR || vector < BX_LAPIC_FIRST_VECTOR) {
|
||
shadow_error_status |= APIC_ERR_RX_ILLEGAL_VEC;
|
||
BX_INFO(("bogus vector %#x, ignoring ...", vector));
|
||
return;
|
||
}
|
||
|
||
BX_DEBUG(("triggered vector %#02x", vector));
|
||
|
||
if(bypass_irr_isr) {
|
||
goto service_vector;
|
||
}
|
||
|
||
if(irr[vector] != 0) {
|
||
BX_DEBUG(("triggered vector %#02x not accepted", vector));
|
||
return;
|
||
}
|
||
|
||
service_vector:
|
||
irr[vector] = 1;
|
||
tmr[vector] = trigger_mode; // set for level triggered
|
||
service_local_apic();
|
||
}
|
||
|
||
void bx_local_apic_c::untrigger_irq(unsigned vector, unsigned trigger_mode)
|
||
{
|
||
BX_DEBUG(("Local apic on %s: untrigger interrupt vector=0x%x", cpu->name, vector));
|
||
// hardware says "no more". clear the bit. If the CPU hasn't yet
|
||
// acknowledged the interrupt, it will never be serviced.
|
||
BX_ASSERT(irr[vector] == 1);
|
||
irr[vector] = 0;
|
||
if(bx_dbg.apic) print_status();
|
||
}
|
||
|
||
Bit8u bx_local_apic_c::acknowledge_int(void)
|
||
{
|
||
// CPU calls this when it is ready to service one interrupt
|
||
if(!INTR)
|
||
BX_PANIC(("%s: acknowledged an interrupt, but INTR=0", cpu->name));
|
||
BX_ASSERT(INTR);
|
||
int vector = highest_priority_int(irr);
|
||
if (vector < 0) goto spurious;
|
||
if((vector & 0xf0) <= get_ppr()) goto spurious;
|
||
BX_ASSERT(irr[vector] == 1);
|
||
BX_DEBUG(("%s: acknowledge_int returning vector 0x%x", cpu->name, vector));
|
||
irr[vector] = 0;
|
||
isr[vector] = 1;
|
||
if(bx_dbg.apic) {
|
||
BX_INFO(("Status after setting isr:"));
|
||
print_status();
|
||
}
|
||
INTR = 0;
|
||
cpu->async_event = 1;
|
||
service_local_apic(); // will set INTR again if another is ready
|
||
return vector;
|
||
|
||
spurious:
|
||
INTR = 0;
|
||
cpu->async_event = 1;
|
||
return spurious_vector;
|
||
}
|
||
|
||
void bx_local_apic_c::print_status(void)
|
||
{
|
||
BX_INFO(("%s local apic: status is {:", cpu->name));
|
||
for(int vec=0; vec<BX_LAPIC_MAX_INTS; vec++) {
|
||
if(irr[vec] || isr[vec]) {
|
||
BX_INFO(("vec 0x%x: irr=%d, isr=%d", vec,(int)irr[vec],(int)isr[vec]));
|
||
}
|
||
}
|
||
BX_INFO(("}"));
|
||
}
|
||
|
||
bx_bool bx_local_apic_c::match_logical_addr(Bit8u address)
|
||
{
|
||
bx_bool match = 0;
|
||
|
||
if (dest_format == 0xf) {
|
||
// flat model
|
||
match = ((address & log_dest) != 0);
|
||
BX_DEBUG(("%s: comparing MDA %02x to my LDR %02x -> %s", cpu->name,
|
||
address, log_dest, match? "Match" : "Not a match"));
|
||
}
|
||
else if (dest_format == 0) {
|
||
// cluster model
|
||
if (address == 0xff) // broadcast all
|
||
return 1;
|
||
|
||
if ((unsigned)(address & 0xf0) == (unsigned)(log_dest & 0xf0))
|
||
match = ((address & log_dest & 0x0f) != 0);
|
||
}
|
||
else {
|
||
BX_PANIC(("bx_local_apic_c::match_logical_addr: unsupported dest format 0x%x", dest_format));
|
||
}
|
||
|
||
return match;
|
||
}
|
||
|
||
Bit8u bx_local_apic_c::get_ppr(void)
|
||
{
|
||
int ppr = highest_priority_int(isr);
|
||
|
||
if((ppr < 0) || ((task_priority & 0xF0) >= ((Bit32u) ppr & 0xF0)))
|
||
ppr = task_priority;
|
||
else
|
||
ppr &= 0xF0;
|
||
|
||
return ppr;
|
||
}
|
||
|
||
Bit8u bx_local_apic_c::get_tpr(void)
|
||
{
|
||
return task_priority;
|
||
}
|
||
|
||
void bx_local_apic_c::set_tpr(Bit8u priority)
|
||
{
|
||
if(priority < task_priority) {
|
||
task_priority = priority;
|
||
service_local_apic();
|
||
} else {
|
||
task_priority = priority;
|
||
}
|
||
}
|
||
|
||
Bit8u bx_local_apic_c::get_apr(void)
|
||
{
|
||
Bit32u tpr = (task_priority >> 4) & 0xf;
|
||
int first_isr = highest_priority_int(isr);
|
||
if (first_isr < 0) first_isr = 0;
|
||
int first_irr = highest_priority_int(irr);
|
||
if (first_irr < 0) first_irr = 0;
|
||
Bit32u isrv = (first_isr >> 4) & 0xf;
|
||
Bit32u irrv = (first_irr >> 4) & 0xf;
|
||
Bit8u apr;
|
||
|
||
if((tpr >= irrv) && (tpr > isrv)) {
|
||
apr = task_priority & 0xff;
|
||
}
|
||
else {
|
||
apr = ((tpr & isrv) > irrv) ?(tpr & isrv) : irrv;
|
||
apr <<= 4;
|
||
}
|
||
|
||
BX_DEBUG(("apr = %d\n", apr));
|
||
|
||
return(Bit8u) apr;
|
||
}
|
||
|
||
bx_bool bx_local_apic_c::is_focus(Bit8u vector)
|
||
{
|
||
if(focus_disable) return 0;
|
||
return(irr[vector] || isr[vector]) ? 1 : 0;
|
||
}
|
||
|
||
void bx_local_apic_c::periodic_smf(void *this_ptr)
|
||
{
|
||
bx_local_apic_c *class_ptr = (bx_local_apic_c *) this_ptr;
|
||
class_ptr->periodic();
|
||
}
|
||
|
||
void bx_local_apic_c::periodic(void)
|
||
{
|
||
if(!timer_active) {
|
||
BX_ERROR(("%s: bx_local_apic_c::periodic called, timer_active==0", cpu->name));
|
||
return;
|
||
}
|
||
|
||
// timer reached zero since the last call to periodic.
|
||
Bit32u timervec = lvt[APIC_LVT_TIMER];
|
||
if(timervec & 0x20000) {
|
||
// Periodic mode.
|
||
// If timer is not masked, trigger interrupt.
|
||
if((timervec & 0x10000)==0) {
|
||
trigger_irq(timervec & 0xff, APIC_EDGE_TRIGGERED);
|
||
}
|
||
else {
|
||
BX_DEBUG(("%s: local apic timer LVT masked", cpu->name));
|
||
}
|
||
// Reload timer values.
|
||
timer_current = timer_initial;
|
||
ticksInitial = bx_pc_system.time_ticks(); // Take a reading.
|
||
BX_DEBUG(("%s: local apic timer(periodic) triggered int, reset counter to 0x%08x", cpu->name, timer_current));
|
||
}
|
||
else {
|
||
// one-shot mode
|
||
timer_current = 0;
|
||
// If timer is not masked, trigger interrupt.
|
||
if((timervec & 0x10000)==0) {
|
||
trigger_irq(timervec & 0xff, APIC_EDGE_TRIGGERED);
|
||
}
|
||
else {
|
||
BX_DEBUG(("%s: local apic timer LVT masked", cpu->name));
|
||
}
|
||
timer_active = 0;
|
||
BX_DEBUG(("%s: local apic timer(one-shot) triggered int", cpu->name));
|
||
bx_pc_system.deactivate_timer(timer_handle);
|
||
}
|
||
}
|
||
|
||
void bx_local_apic_c::set_divide_configuration(Bit32u value)
|
||
{
|
||
BX_ASSERT(value == (value & 0x0b));
|
||
// move bit 3 down to bit 0.
|
||
value = ((value & 8) >> 1) | (value & 3);
|
||
BX_ASSERT(value >= 0 && value <= 7);
|
||
timer_divide_factor = (value==7)? 1 : (2 << value);
|
||
BX_INFO(("%s: set timer divide factor to %d", cpu->name, timer_divide_factor));
|
||
}
|
||
|
||
void bx_local_apic_c::set_initial_timer_count(Bit32u value)
|
||
{
|
||
// If active before, deactive the current timer before changing it.
|
||
if(timer_active) {
|
||
bx_pc_system.deactivate_timer(timer_handle);
|
||
timer_active = 0;
|
||
}
|
||
|
||
timer_initial = value;
|
||
timer_current = 0;
|
||
|
||
if(timer_initial != 0) // terminate the counting if timer_initial = 0
|
||
{
|
||
// This should trigger the counter to start. If already started,
|
||
// restart from the new start value.
|
||
BX_DEBUG(("APIC: Initial Timer Count Register = %u", value));
|
||
timer_current = timer_initial;
|
||
timer_active = 1;
|
||
Bit32u timervec = lvt[APIC_LVT_TIMER];
|
||
bx_bool continuous = (timervec & 0x20000) > 0;
|
||
ticksInitial = bx_pc_system.time_ticks(); // Take a reading.
|
||
bx_pc_system.activate_timer_ticks(timer_handle,
|
||
Bit64u(timer_initial) * Bit64u(timer_divide_factor), continuous);
|
||
}
|
||
}
|
||
|
||
void bx_local_apic_c::register_state(bx_param_c *parent)
|
||
{
|
||
unsigned i;
|
||
char name[6];
|
||
|
||
bx_list_c *lapic = new bx_list_c(parent, "local_apic", 25);
|
||
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, base_addr);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, id);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, spurious_vector);
|
||
BXRS_PARAM_BOOL(lapic, software_enabled, software_enabled);
|
||
BXRS_PARAM_BOOL(lapic, focus_disable, focus_disable);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, task_priority);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, spurious_vector);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, log_dest);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, dest_format);
|
||
|
||
bx_list_c *ISR = new bx_list_c(lapic, "isr", BX_LAPIC_MAX_INTS);
|
||
bx_list_c *TMR = new bx_list_c(lapic, "tmr", BX_LAPIC_MAX_INTS);
|
||
bx_list_c *IRR = new bx_list_c(lapic, "irr", BX_LAPIC_MAX_INTS);
|
||
for (i=0; i<BX_LAPIC_MAX_INTS; i++) {
|
||
sprintf(name, "0x%02x", i);
|
||
new bx_shadow_num_c(ISR, name, &isr[i]);
|
||
new bx_shadow_num_c(TMR, name, &tmr[i]);
|
||
new bx_shadow_num_c(IRR, name, &irr[i]);
|
||
}
|
||
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, error_status);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, shadow_error_status);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, icr_hi);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, icr_lo);
|
||
|
||
bx_list_c *LVT = new bx_list_c(lapic, "lvt", APIC_LVT_ENTRIES);
|
||
for (i=0; i<APIC_LVT_ENTRIES; i++) {
|
||
sprintf(name, "%d", i);
|
||
new bx_shadow_num_c(LVT, name, &lvt[i], BASE_HEX);
|
||
}
|
||
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, timer_initial);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, timer_current);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, timer_divconf);
|
||
BXRS_DEC_PARAM_SIMPLE(lapic, timer_divide_factor);
|
||
BXRS_PARAM_BOOL(lapic, timer_active, timer_active);
|
||
BXRS_HEX_PARAM_SIMPLE(lapic, ticksInitial);
|
||
BXRS_PARAM_BOOL(lapic, INTR, INTR);
|
||
}
|
||
|
||
#endif /* if BX_SUPPORT_APIC */
|