10760 lines
288 KiB
C
10760 lines
288 KiB
C
/////////////////////////////////////////////////////////////////////////
|
|
// $Id: rombios.c,v 1.175 2006-11-04 18:06:36 vruppert Exp $
|
|
/////////////////////////////////////////////////////////////////////////
|
|
//
|
|
// Copyright (C) 2002 MandrakeSoft S.A.
|
|
//
|
|
// MandrakeSoft S.A.
|
|
// 43, rue d'Aboukir
|
|
// 75002 Paris - France
|
|
// http://www.linux-mandrake.com/
|
|
// http://www.mandrakesoft.com/
|
|
//
|
|
// This library is free software; you can redistribute it and/or
|
|
// modify it under the terms of the GNU Lesser General Public
|
|
// License as published by the Free Software Foundation; either
|
|
// version 2 of the License, or (at your option) any later version.
|
|
//
|
|
// This library is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
// Lesser General Public License for more details.
|
|
//
|
|
// You should have received a copy of the GNU Lesser General Public
|
|
// License along with this library; if not, write to the Free Software
|
|
// Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
|
|
// ROM BIOS for use with Bochs/Plex86/QEMU emulation environment
|
|
|
|
|
|
// ROM BIOS compatability entry points:
|
|
// ===================================
|
|
// $e05b ; POST Entry Point
|
|
// $e2c3 ; NMI Handler Entry Point
|
|
// $e3fe ; INT 13h Fixed Disk Services Entry Point
|
|
// $e401 ; Fixed Disk Parameter Table
|
|
// $e6f2 ; INT 19h Boot Load Service Entry Point
|
|
// $e6f5 ; Configuration Data Table
|
|
// $e729 ; Baud Rate Generator Table
|
|
// $e739 ; INT 14h Serial Communications Service Entry Point
|
|
// $e82e ; INT 16h Keyboard Service Entry Point
|
|
// $e987 ; INT 09h Keyboard Service Entry Point
|
|
// $ec59 ; INT 13h Diskette Service Entry Point
|
|
// $ef57 ; INT 0Eh Diskette Hardware ISR Entry Point
|
|
// $efc7 ; Diskette Controller Parameter Table
|
|
// $efd2 ; INT 17h Printer Service Entry Point
|
|
// $f045 ; INT 10 Functions 0-Fh Entry Point
|
|
// $f065 ; INT 10h Video Support Service Entry Point
|
|
// $f0a4 ; MDA/CGA Video Parameter Table (INT 1Dh)
|
|
// $f841 ; INT 12h Memory Size Service Entry Point
|
|
// $f84d ; INT 11h Equipment List Service Entry Point
|
|
// $f859 ; INT 15h System Services Entry Point
|
|
// $fa6e ; Character Font for 320x200 & 640x200 Graphics (lower 128 characters)
|
|
// $fe6e ; INT 1Ah Time-of-day Service Entry Point
|
|
// $fea5 ; INT 08h System Timer ISR Entry Point
|
|
// $fef3 ; Initial Interrupt Vector Offsets Loaded by POST
|
|
// $ff53 ; IRET Instruction for Dummy Interrupt Handler
|
|
// $ff54 ; INT 05h Print Screen Service Entry Point
|
|
// $fff0 ; Power-up Entry Point
|
|
// $fff5 ; ASCII Date ROM was built - 8 characters in MM/DD/YY
|
|
// $fffe ; System Model ID
|
|
|
|
// NOTES for ATA/ATAPI driver (cbbochs@free.fr)
|
|
// Features
|
|
// - supports up to 4 ATA interfaces
|
|
// - device/geometry detection
|
|
// - 16bits/32bits device access
|
|
// - pchs/lba access
|
|
// - datain/dataout/packet command support
|
|
//
|
|
// NOTES for El-Torito Boot (cbbochs@free.fr)
|
|
// - CD-ROM booting is only available if ATA/ATAPI Driver is available
|
|
// - Current code is only able to boot mono-session cds
|
|
// - Current code can not boot and emulate a hard-disk
|
|
// the bios will panic otherwise
|
|
// - Current code also use memory in EBDA segement.
|
|
// - I used cmos byte 0x3D to store extended information on boot-device
|
|
// - Code has to be modified modified to handle multiple cdrom drives
|
|
// - Here are the cdrom boot failure codes:
|
|
// 1 : no atapi device found
|
|
// 2 : no atapi cdrom found
|
|
// 3 : can not read cd - BRVD
|
|
// 4 : cd is not eltorito (BRVD)
|
|
// 5 : cd is not eltorito (ISO TAG)
|
|
// 6 : cd is not eltorito (ELTORITO TAG)
|
|
// 7 : can not read cd - boot catalog
|
|
// 8 : boot catalog : bad header
|
|
// 9 : boot catalog : bad platform
|
|
// 10 : boot catalog : bad signature
|
|
// 11 : boot catalog : bootable flag not set
|
|
// 12 : can not read cd - boot image
|
|
//
|
|
// ATA driver
|
|
// - EBDA segment.
|
|
// I used memory starting at 0x121 in the segment
|
|
// - the translation policy is defined in cmos regs 0x39 & 0x3a
|
|
//
|
|
// TODO :
|
|
//
|
|
// int74
|
|
// - needs to be reworked. Uses direct [bp] offsets. (?)
|
|
//
|
|
// int13:
|
|
// - f04 (verify sectors) isn't complete (?)
|
|
// - f02/03/04 should set current cyl,etc in BDA (?)
|
|
// - rewrite int13_relocated & clean up int13 entry code
|
|
//
|
|
// NOTES:
|
|
// - NMI access (bit7 of addr written to 70h)
|
|
//
|
|
// ATA driver
|
|
// - should handle the "don't detect" bit (cmos regs 0x3b & 0x3c)
|
|
// - could send the multiple-sector read/write commands
|
|
//
|
|
// El-Torito
|
|
// - Emulate a Hard-disk (currently only diskette can be emulated) see "FIXME ElTorito Harddisk"
|
|
// - Implement remaining int13_cdemu functions (as defined by El-Torito specs)
|
|
// - cdrom drive is hardcoded to ide 0 device 1 in several places. see "FIXME ElTorito Hardcoded"
|
|
// - int13 Fix DL when emulating a cd. In that case DL is decremented before calling real int13.
|
|
// This is ok. But DL should be reincremented afterwards.
|
|
// - Fix all "FIXME ElTorito Various"
|
|
// - should be able to boot any cdrom instead of the first one
|
|
//
|
|
// BCC Bug: find a generic way to handle the bug of #asm after an "if" (fixed in 0.16.7)
|
|
|
|
#include "rombios.h"
|
|
|
|
#define DEBUG_ATA 0
|
|
#define DEBUG_INT13_HD 0
|
|
#define DEBUG_INT13_CD 0
|
|
#define DEBUG_INT13_ET 0
|
|
#define DEBUG_INT13_FL 0
|
|
#define DEBUG_INT15 0
|
|
#define DEBUG_INT16 0
|
|
#define DEBUG_INT1A 0
|
|
#define DEBUG_INT74 0
|
|
#define DEBUG_APM 0
|
|
|
|
#define BX_CPU 3
|
|
#define BX_USE_PS2_MOUSE 1
|
|
#define BX_CALL_INT15_4F 1
|
|
#define BX_USE_EBDA 1
|
|
#define BX_SUPPORT_FLOPPY 1
|
|
#define BX_FLOPPY_ON_CNT 37 /* 2 seconds */
|
|
#define BX_PCIBIOS 1
|
|
#define BX_APM 1
|
|
|
|
#define BX_USE_ATADRV 1
|
|
#define BX_ELTORITO_BOOT 1
|
|
|
|
#define BX_MAX_ATA_INTERFACES 4
|
|
#define BX_MAX_ATA_DEVICES (BX_MAX_ATA_INTERFACES*2)
|
|
|
|
#define BX_VIRTUAL_PORTS 1 /* normal output to Bochs ports */
|
|
#define BX_DEBUG_SERIAL 0 /* output to COM1 */
|
|
|
|
/* model byte 0xFC = AT */
|
|
#define SYS_MODEL_ID 0xFC
|
|
#define SYS_SUBMODEL_ID 0x00
|
|
#define BIOS_REVISION 1
|
|
#define BIOS_CONFIG_TABLE 0xe6f5
|
|
|
|
#ifndef BIOS_BUILD_DATE
|
|
# define BIOS_BUILD_DATE "06/23/99"
|
|
#endif
|
|
|
|
// 1K of base memory used for Extended Bios Data Area (EBDA)
|
|
// EBDA is used for PS/2 mouse support, and IDE BIOS, etc.
|
|
#define EBDA_SEG 0x9FC0
|
|
#define EBDA_SIZE 1 // In KiB
|
|
#define BASE_MEM_IN_K (640 - EBDA_SIZE)
|
|
|
|
// Define the application NAME
|
|
#if defined(BX_QEMU)
|
|
# define BX_APPNAME "QEMU"
|
|
#elif defined(PLEX86)
|
|
# define BX_APPNAME "Plex86"
|
|
#else
|
|
# define BX_APPNAME "Bochs"
|
|
#endif
|
|
|
|
// Sanity Checks
|
|
#if BX_USE_ATADRV && BX_CPU<3
|
|
# error The ATA/ATAPI Driver can only to be used with a 386+ cpu
|
|
#endif
|
|
#if BX_USE_ATADRV && !BX_USE_EBDA
|
|
# error ATA/ATAPI Driver can only be used if EBDA is available
|
|
#endif
|
|
#if BX_ELTORITO_BOOT && !BX_USE_ATADRV
|
|
# error El-Torito Boot can only be use if ATA/ATAPI Driver is available
|
|
#endif
|
|
#if BX_PCIBIOS && BX_CPU<3
|
|
# error PCI BIOS can only be used with 386+ cpu
|
|
#endif
|
|
#if BX_APM && BX_CPU<3
|
|
# error APM BIOS can only be used with 386+ cpu
|
|
#endif
|
|
|
|
// define this if you want to make PCIBIOS working on a specific bridge only
|
|
// undef enables PCIBIOS when at least one PCI device is found
|
|
// i440FX is emulated by Bochs and QEMU
|
|
#define PCI_FIXED_HOST_BRIDGE 0x12378086 ;; i440FX PCI bridge
|
|
|
|
// #20 is dec 20
|
|
// #$20 is hex 20 = 32
|
|
// #0x20 is hex 20 = 32
|
|
// LDA #$20
|
|
// JSR $E820
|
|
// LDD .i,S
|
|
// JSR $C682
|
|
// mov al, #$20
|
|
|
|
// all hex literals should be prefixed with '0x'
|
|
// grep "#[0-9a-fA-F][0-9a-fA-F]" rombios.c
|
|
// no mov SEG-REG, #value, must mov register into seg-reg
|
|
// grep -i "mov[ ]*.s" rombios.c
|
|
|
|
// This is for compiling with gcc2 and gcc3
|
|
#define ASM_START #asm
|
|
#define ASM_END #endasm
|
|
|
|
ASM_START
|
|
.rom
|
|
|
|
.org 0x0000
|
|
|
|
#if BX_CPU >= 3
|
|
use16 386
|
|
#else
|
|
use16 286
|
|
#endif
|
|
|
|
MACRO HALT
|
|
;; the HALT macro is called with the line number of the HALT call.
|
|
;; The line number is then sent to the PANIC_PORT, causing Bochs/Plex
|
|
;; to print a BX_PANIC message. This will normally halt the simulation
|
|
;; with a message such as "BIOS panic at rombios.c, line 4091".
|
|
;; However, users can choose to make panics non-fatal and continue.
|
|
#if BX_VIRTUAL_PORTS
|
|
mov dx,#PANIC_PORT
|
|
mov ax,#?1
|
|
out dx,ax
|
|
#else
|
|
mov dx,#0x80
|
|
mov ax,#?1
|
|
out dx,al
|
|
#endif
|
|
MEND
|
|
|
|
MACRO JMP_AP
|
|
db 0xea
|
|
dw ?2
|
|
dw ?1
|
|
MEND
|
|
|
|
MACRO SET_INT_VECTOR
|
|
mov ax, ?3
|
|
mov ?1*4, ax
|
|
mov ax, ?2
|
|
mov ?1*4+2, ax
|
|
MEND
|
|
|
|
ASM_END
|
|
|
|
typedef unsigned char Bit8u;
|
|
typedef unsigned short Bit16u;
|
|
typedef unsigned short bx_bool;
|
|
typedef unsigned long Bit32u;
|
|
|
|
#if BX_USE_ATADRV
|
|
|
|
void memsetb(seg,offset,value,count);
|
|
void memcpyb(dseg,doffset,sseg,soffset,count);
|
|
void memcpyd(dseg,doffset,sseg,soffset,count);
|
|
|
|
// memset of count bytes
|
|
void
|
|
memsetb(seg,offset,value,count)
|
|
Bit16u seg;
|
|
Bit16u offset;
|
|
Bit16u value;
|
|
Bit16u count;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push ax
|
|
push cx
|
|
push es
|
|
push di
|
|
|
|
mov cx, 10[bp] ; count
|
|
cmp cx, #0x00
|
|
je memsetb_end
|
|
mov ax, 4[bp] ; segment
|
|
mov es, ax
|
|
mov ax, 6[bp] ; offset
|
|
mov di, ax
|
|
mov al, 8[bp] ; value
|
|
cld
|
|
rep
|
|
stosb
|
|
|
|
memsetb_end:
|
|
pop di
|
|
pop es
|
|
pop cx
|
|
pop ax
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
#if 0
|
|
// memcpy of count bytes
|
|
void
|
|
memcpyb(dseg,doffset,sseg,soffset,count)
|
|
Bit16u dseg;
|
|
Bit16u doffset;
|
|
Bit16u sseg;
|
|
Bit16u soffset;
|
|
Bit16u count;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push ax
|
|
push cx
|
|
push es
|
|
push di
|
|
push ds
|
|
push si
|
|
|
|
mov cx, 12[bp] ; count
|
|
cmp cx, #0x0000
|
|
je memcpyb_end
|
|
mov ax, 4[bp] ; dsegment
|
|
mov es, ax
|
|
mov ax, 6[bp] ; doffset
|
|
mov di, ax
|
|
mov ax, 8[bp] ; ssegment
|
|
mov ds, ax
|
|
mov ax, 10[bp] ; soffset
|
|
mov si, ax
|
|
cld
|
|
rep
|
|
movsb
|
|
|
|
memcpyb_end:
|
|
pop si
|
|
pop ds
|
|
pop di
|
|
pop es
|
|
pop cx
|
|
pop ax
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
// memcpy of count dword
|
|
void
|
|
memcpyd(dseg,doffset,sseg,soffset,count)
|
|
Bit16u dseg;
|
|
Bit16u doffset;
|
|
Bit16u sseg;
|
|
Bit16u soffset;
|
|
Bit16u count;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push ax
|
|
push cx
|
|
push es
|
|
push di
|
|
push ds
|
|
push si
|
|
|
|
mov cx, 12[bp] ; count
|
|
cmp cx, #0x0000
|
|
je memcpyd_end
|
|
mov ax, 4[bp] ; dsegment
|
|
mov es, ax
|
|
mov ax, 6[bp] ; doffset
|
|
mov di, ax
|
|
mov ax, 8[bp] ; ssegment
|
|
mov ds, ax
|
|
mov ax, 10[bp] ; soffset
|
|
mov si, ax
|
|
cld
|
|
rep
|
|
movsd
|
|
|
|
memcpyd_end:
|
|
pop si
|
|
pop ds
|
|
pop di
|
|
pop es
|
|
pop cx
|
|
pop ax
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
#endif
|
|
#endif //BX_USE_ATADRV
|
|
|
|
// read_dword and write_dword functions
|
|
static Bit32u read_dword();
|
|
static void write_dword();
|
|
|
|
Bit32u
|
|
read_dword(seg, offset)
|
|
Bit16u seg;
|
|
Bit16u offset;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push bx
|
|
push ds
|
|
mov ax, 4[bp] ; segment
|
|
mov ds, ax
|
|
mov bx, 6[bp] ; offset
|
|
mov ax, [bx]
|
|
inc bx
|
|
inc bx
|
|
mov dx, [bx]
|
|
;; ax = return value (word)
|
|
;; dx = return value (word)
|
|
pop ds
|
|
pop bx
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
void
|
|
write_dword(seg, offset, data)
|
|
Bit16u seg;
|
|
Bit16u offset;
|
|
Bit32u data;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push ax
|
|
push bx
|
|
push ds
|
|
mov ax, 4[bp] ; segment
|
|
mov ds, ax
|
|
mov bx, 6[bp] ; offset
|
|
mov ax, 8[bp] ; data word
|
|
mov [bx], ax ; write data word
|
|
inc bx
|
|
inc bx
|
|
mov ax, 10[bp] ; data word
|
|
mov [bx], ax ; write data word
|
|
pop ds
|
|
pop bx
|
|
pop ax
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
// Bit32u (unsigned long) and long helper functions
|
|
ASM_START
|
|
|
|
;; and function
|
|
landl:
|
|
landul:
|
|
SEG SS
|
|
and ax,[di]
|
|
SEG SS
|
|
and bx,2[di]
|
|
ret
|
|
|
|
;; add function
|
|
laddl:
|
|
laddul:
|
|
SEG SS
|
|
add ax,[di]
|
|
SEG SS
|
|
adc bx,2[di]
|
|
ret
|
|
|
|
;; cmp function
|
|
lcmpl:
|
|
lcmpul:
|
|
and eax, #0x0000FFFF
|
|
shl ebx, #16
|
|
add eax, ebx
|
|
shr ebx, #16
|
|
SEG SS
|
|
cmp eax, dword ptr [di]
|
|
ret
|
|
|
|
;; sub function
|
|
lsubl:
|
|
lsubul:
|
|
SEG SS
|
|
sub ax,[di]
|
|
SEG SS
|
|
sbb bx,2[di]
|
|
ret
|
|
|
|
;; mul function
|
|
lmull:
|
|
lmulul:
|
|
and eax, #0x0000FFFF
|
|
shl ebx, #16
|
|
add eax, ebx
|
|
SEG SS
|
|
mul eax, dword ptr [di]
|
|
mov ebx, eax
|
|
shr ebx, #16
|
|
ret
|
|
|
|
;; dec function
|
|
ldecl:
|
|
ldecul:
|
|
SEG SS
|
|
dec dword ptr [bx]
|
|
ret
|
|
|
|
;; or function
|
|
lorl:
|
|
lorul:
|
|
SEG SS
|
|
or ax,[di]
|
|
SEG SS
|
|
or bx,2[di]
|
|
ret
|
|
|
|
;; inc function
|
|
lincl:
|
|
lincul:
|
|
SEG SS
|
|
inc dword ptr [bx]
|
|
ret
|
|
|
|
;; tst function
|
|
ltstl:
|
|
ltstul:
|
|
and eax, #0x0000FFFF
|
|
shl ebx, #16
|
|
add eax, ebx
|
|
shr ebx, #16
|
|
test eax, eax
|
|
ret
|
|
|
|
;; sr function
|
|
lsrul:
|
|
mov cx,di
|
|
jcxz lsr_exit
|
|
and eax, #0x0000FFFF
|
|
shl ebx, #16
|
|
add eax, ebx
|
|
lsr_loop:
|
|
shr eax, #1
|
|
loop lsr_loop
|
|
mov ebx, eax
|
|
shr ebx, #16
|
|
lsr_exit:
|
|
ret
|
|
|
|
;; sl function
|
|
lsll:
|
|
lslul:
|
|
mov cx,di
|
|
jcxz lsl_exit
|
|
and eax, #0x0000FFFF
|
|
shl ebx, #16
|
|
add eax, ebx
|
|
lsl_loop:
|
|
shl eax, #1
|
|
loop lsl_loop
|
|
mov ebx, eax
|
|
shr ebx, #16
|
|
lsl_exit:
|
|
ret
|
|
|
|
idiv_:
|
|
cwd
|
|
idiv bx
|
|
ret
|
|
|
|
idiv_u:
|
|
xor dx,dx
|
|
div bx
|
|
ret
|
|
|
|
ldivul:
|
|
and eax, #0x0000FFFF
|
|
shl ebx, #16
|
|
add eax, ebx
|
|
xor edx, edx
|
|
SEG SS
|
|
mov bx, 2[di]
|
|
shl ebx, #16
|
|
SEG SS
|
|
mov bx, [di]
|
|
div ebx
|
|
mov ebx, eax
|
|
shr ebx, #16
|
|
ret
|
|
|
|
ASM_END
|
|
|
|
// for access to RAM area which is used by interrupt vectors
|
|
// and BIOS Data Area
|
|
|
|
typedef struct {
|
|
unsigned char filler1[0x400];
|
|
unsigned char filler2[0x6c];
|
|
Bit16u ticks_low;
|
|
Bit16u ticks_high;
|
|
Bit8u midnight_flag;
|
|
} bios_data_t;
|
|
|
|
#define BiosData ((bios_data_t *) 0)
|
|
|
|
#if BX_USE_ATADRV
|
|
typedef struct {
|
|
Bit16u heads; // # heads
|
|
Bit16u cylinders; // # cylinders
|
|
Bit16u spt; // # sectors / track
|
|
} chs_t;
|
|
|
|
// DPTE definition
|
|
typedef struct {
|
|
Bit16u iobase1;
|
|
Bit16u iobase2;
|
|
Bit8u prefix;
|
|
Bit8u unused;
|
|
Bit8u irq;
|
|
Bit8u blkcount;
|
|
Bit8u dma;
|
|
Bit8u pio;
|
|
Bit16u options;
|
|
Bit16u reserved;
|
|
Bit8u revision;
|
|
Bit8u checksum;
|
|
} dpte_t;
|
|
|
|
typedef struct {
|
|
Bit8u iface; // ISA or PCI
|
|
Bit16u iobase1; // IO Base 1
|
|
Bit16u iobase2; // IO Base 2
|
|
Bit8u irq; // IRQ
|
|
} ata_channel_t;
|
|
|
|
typedef struct {
|
|
Bit8u type; // Detected type of ata (ata/atapi/none/unknown)
|
|
Bit8u device; // Detected type of attached devices (hd/cd/none)
|
|
Bit8u removable; // Removable device flag
|
|
Bit8u lock; // Locks for removable devices
|
|
// Bit8u lba_capable; // LBA capable flag - always yes for bochs devices
|
|
Bit8u mode; // transfert mode : PIO 16/32 bits - IRQ - ISADMA - PCIDMA
|
|
Bit16u blksize; // block size
|
|
|
|
Bit8u translation; // type of translation
|
|
chs_t lchs; // Logical CHS
|
|
chs_t pchs; // Physical CHS
|
|
|
|
Bit32u sectors; // Total sectors count
|
|
} ata_device_t;
|
|
|
|
typedef struct {
|
|
// ATA channels info
|
|
ata_channel_t channels[BX_MAX_ATA_INTERFACES];
|
|
|
|
// ATA devices info
|
|
ata_device_t devices[BX_MAX_ATA_DEVICES];
|
|
//
|
|
// map between (bios hd id - 0x80) and ata channels
|
|
Bit8u hdcount, hdidmap[BX_MAX_ATA_DEVICES];
|
|
|
|
// map between (bios cd id - 0xE0) and ata channels
|
|
Bit8u cdcount, cdidmap[BX_MAX_ATA_DEVICES];
|
|
|
|
// Buffer for DPTE table
|
|
dpte_t dpte;
|
|
|
|
// Count of transferred sectors and bytes
|
|
Bit16u trsfsectors;
|
|
Bit32u trsfbytes;
|
|
|
|
} ata_t;
|
|
|
|
#if BX_ELTORITO_BOOT
|
|
// ElTorito Device Emulation data
|
|
typedef struct {
|
|
Bit8u active;
|
|
Bit8u media;
|
|
Bit8u emulated_drive;
|
|
Bit8u controller_index;
|
|
Bit16u device_spec;
|
|
Bit32u ilba;
|
|
Bit16u buffer_segment;
|
|
Bit16u load_segment;
|
|
Bit16u sector_count;
|
|
|
|
// Virtual device
|
|
chs_t vdevice;
|
|
} cdemu_t;
|
|
#endif // BX_ELTORITO_BOOT
|
|
|
|
// for access to EBDA area
|
|
// The EBDA structure should conform to
|
|
// http://www.frontiernet.net/~fys/rombios.htm document
|
|
// I made the ata and cdemu structs begin at 0x121 in the EBDA seg
|
|
typedef struct {
|
|
unsigned char filler1[0x3D];
|
|
|
|
// FDPT - Can be splitted in data members if needed
|
|
unsigned char fdpt0[0x10];
|
|
unsigned char fdpt1[0x10];
|
|
|
|
unsigned char filler2[0xC4];
|
|
|
|
// ATA Driver data
|
|
ata_t ata;
|
|
|
|
#if BX_ELTORITO_BOOT
|
|
// El Torito Emulation data
|
|
cdemu_t cdemu;
|
|
#endif // BX_ELTORITO_BOOT
|
|
|
|
} ebda_data_t;
|
|
|
|
#define EbdaData ((ebda_data_t *) 0)
|
|
|
|
// for access to the int13ext structure
|
|
typedef struct {
|
|
Bit8u size;
|
|
Bit8u reserved;
|
|
Bit16u count;
|
|
Bit16u offset;
|
|
Bit16u segment;
|
|
Bit32u lba1;
|
|
Bit32u lba2;
|
|
} int13ext_t;
|
|
|
|
#define Int13Ext ((int13ext_t *) 0)
|
|
|
|
// Disk Physical Table definition
|
|
typedef struct {
|
|
Bit16u size;
|
|
Bit16u infos;
|
|
Bit32u cylinders;
|
|
Bit32u heads;
|
|
Bit32u spt;
|
|
Bit32u sector_count1;
|
|
Bit32u sector_count2;
|
|
Bit16u blksize;
|
|
Bit16u dpte_segment;
|
|
Bit16u dpte_offset;
|
|
Bit16u key;
|
|
Bit8u dpi_length;
|
|
Bit8u reserved1;
|
|
Bit16u reserved2;
|
|
Bit8u host_bus[4];
|
|
Bit8u iface_type[8];
|
|
Bit8u iface_path[8];
|
|
Bit8u device_path[8];
|
|
Bit8u reserved3;
|
|
Bit8u checksum;
|
|
} dpt_t;
|
|
|
|
#define Int13DPT ((dpt_t *) 0)
|
|
|
|
#endif // BX_USE_ATADRV
|
|
|
|
typedef struct {
|
|
union {
|
|
struct {
|
|
Bit16u di, si, bp, sp;
|
|
Bit16u bx, dx, cx, ax;
|
|
} r16;
|
|
struct {
|
|
Bit16u filler[4];
|
|
Bit8u bl, bh, dl, dh, cl, ch, al, ah;
|
|
} r8;
|
|
} u;
|
|
} pusha_regs_t;
|
|
|
|
typedef struct {
|
|
union {
|
|
struct {
|
|
Bit32u edi, esi, ebp, esp;
|
|
Bit32u ebx, edx, ecx, eax;
|
|
} r32;
|
|
struct {
|
|
Bit16u di, filler1, si, filler2, bp, filler3, sp, filler4;
|
|
Bit16u bx, filler5, dx, filler6, cx, filler7, ax, filler8;
|
|
} r16;
|
|
struct {
|
|
Bit32u filler[4];
|
|
Bit8u bl, bh;
|
|
Bit16u filler1;
|
|
Bit8u dl, dh;
|
|
Bit16u filler2;
|
|
Bit8u cl, ch;
|
|
Bit16u filler3;
|
|
Bit8u al, ah;
|
|
Bit16u filler4;
|
|
} r8;
|
|
} u;
|
|
} pushad_regs_t;
|
|
|
|
typedef struct {
|
|
union {
|
|
struct {
|
|
Bit16u flags;
|
|
} r16;
|
|
struct {
|
|
Bit8u flagsl;
|
|
Bit8u flagsh;
|
|
} r8;
|
|
} u;
|
|
} flags_t;
|
|
|
|
#define SetCF(x) x.u.r8.flagsl |= 0x01
|
|
#define SetZF(x) x.u.r8.flagsl |= 0x40
|
|
#define ClearCF(x) x.u.r8.flagsl &= 0xfe
|
|
#define ClearZF(x) x.u.r8.flagsl &= 0xbf
|
|
#define GetCF(x) (x.u.r8.flagsl & 0x01)
|
|
|
|
typedef struct {
|
|
Bit16u ip;
|
|
Bit16u cs;
|
|
flags_t flags;
|
|
} iret_addr_t;
|
|
|
|
|
|
|
|
static Bit8u inb();
|
|
static Bit8u inb_cmos();
|
|
static void outb();
|
|
static void outb_cmos();
|
|
static Bit16u inw();
|
|
static void outw();
|
|
static void init_rtc();
|
|
static bx_bool rtc_updating();
|
|
|
|
static Bit8u read_byte();
|
|
static Bit16u read_word();
|
|
static void write_byte();
|
|
static void write_word();
|
|
static void bios_printf();
|
|
|
|
static Bit8u inhibit_mouse_int_and_events();
|
|
static void enable_mouse_int_and_events();
|
|
static Bit8u send_to_mouse_ctrl();
|
|
static Bit8u get_mouse_data();
|
|
static void set_kbd_command_byte();
|
|
|
|
static void int09_function();
|
|
static void int13_harddisk();
|
|
static void int13_cdrom();
|
|
static void int13_cdemu();
|
|
static void int13_eltorito();
|
|
static void int13_diskette_function();
|
|
static void int14_function();
|
|
static void int15_function();
|
|
static void int16_function();
|
|
static void int17_function();
|
|
static Bit32u int19_function();
|
|
static void int1a_function();
|
|
static void int70_function();
|
|
static void int74_function();
|
|
static Bit16u get_CS();
|
|
static Bit16u get_SS();
|
|
static unsigned int enqueue_key();
|
|
static unsigned int dequeue_key();
|
|
static void get_hd_geometry();
|
|
static void set_diskette_ret_status();
|
|
static void set_diskette_current_cyl();
|
|
static void determine_floppy_media();
|
|
static bx_bool floppy_drive_exists();
|
|
static bx_bool floppy_drive_recal();
|
|
static bx_bool floppy_media_known();
|
|
static bx_bool floppy_media_sense();
|
|
static bx_bool set_enable_a20();
|
|
static void debugger_on();
|
|
static void debugger_off();
|
|
static void keyboard_init();
|
|
static void keyboard_panic();
|
|
static void shutdown_status_panic();
|
|
static void nmi_handler_msg();
|
|
|
|
static void print_bios_banner();
|
|
static void print_boot_device();
|
|
static void print_boot_failure();
|
|
static void print_cdromboot_failure();
|
|
|
|
# if BX_USE_ATADRV
|
|
|
|
// ATA / ATAPI driver
|
|
void ata_init();
|
|
void ata_detect();
|
|
void ata_reset();
|
|
|
|
Bit16u ata_cmd_non_data();
|
|
Bit16u ata_cmd_data_in();
|
|
Bit16u ata_cmd_data_out();
|
|
Bit16u ata_cmd_packet();
|
|
|
|
Bit16u atapi_get_sense();
|
|
Bit16u atapi_is_ready();
|
|
Bit16u atapi_is_cdrom();
|
|
|
|
#endif // BX_USE_ATADRV
|
|
|
|
#if BX_ELTORITO_BOOT
|
|
|
|
void cdemu_init();
|
|
Bit8u cdemu_isactive();
|
|
Bit8u cdemu_emulated_drive();
|
|
|
|
Bit16u cdrom_boot();
|
|
|
|
#endif // BX_ELTORITO_BOOT
|
|
|
|
static char bios_cvs_version_string[] = "$Revision: 1.175 $ $Date: 2006-11-04 18:06:36 $";
|
|
|
|
#define BIOS_COPYRIGHT_STRING "(c) 2002 MandrakeSoft S.A. Written by Kevin Lawton & the Bochs team."
|
|
|
|
#if DEBUG_ATA
|
|
# define BX_DEBUG_ATA(a...) BX_DEBUG(a)
|
|
#else
|
|
# define BX_DEBUG_ATA(a...)
|
|
#endif
|
|
#if DEBUG_INT13_HD
|
|
# define BX_DEBUG_INT13_HD(a...) BX_DEBUG(a)
|
|
#else
|
|
# define BX_DEBUG_INT13_HD(a...)
|
|
#endif
|
|
#if DEBUG_INT13_CD
|
|
# define BX_DEBUG_INT13_CD(a...) BX_DEBUG(a)
|
|
#else
|
|
# define BX_DEBUG_INT13_CD(a...)
|
|
#endif
|
|
#if DEBUG_INT13_ET
|
|
# define BX_DEBUG_INT13_ET(a...) BX_DEBUG(a)
|
|
#else
|
|
# define BX_DEBUG_INT13_ET(a...)
|
|
#endif
|
|
#if DEBUG_INT13_FL
|
|
# define BX_DEBUG_INT13_FL(a...) BX_DEBUG(a)
|
|
#else
|
|
# define BX_DEBUG_INT13_FL(a...)
|
|
#endif
|
|
#if DEBUG_INT15
|
|
# define BX_DEBUG_INT15(a...) BX_DEBUG(a)
|
|
#else
|
|
# define BX_DEBUG_INT15(a...)
|
|
#endif
|
|
#if DEBUG_INT16
|
|
# define BX_DEBUG_INT16(a...) BX_DEBUG(a)
|
|
#else
|
|
# define BX_DEBUG_INT16(a...)
|
|
#endif
|
|
#if DEBUG_INT1A
|
|
# define BX_DEBUG_INT1A(a...) BX_DEBUG(a)
|
|
#else
|
|
# define BX_DEBUG_INT1A(a...)
|
|
#endif
|
|
#if DEBUG_INT74
|
|
# define BX_DEBUG_INT74(a...) BX_DEBUG(a)
|
|
#else
|
|
# define BX_DEBUG_INT74(a...)
|
|
#endif
|
|
|
|
#define SET_AL(val8) AX = ((AX & 0xff00) | (val8))
|
|
#define SET_BL(val8) BX = ((BX & 0xff00) | (val8))
|
|
#define SET_CL(val8) CX = ((CX & 0xff00) | (val8))
|
|
#define SET_DL(val8) DX = ((DX & 0xff00) | (val8))
|
|
#define SET_AH(val8) AX = ((AX & 0x00ff) | ((val8) << 8))
|
|
#define SET_BH(val8) BX = ((BX & 0x00ff) | ((val8) << 8))
|
|
#define SET_CH(val8) CX = ((CX & 0x00ff) | ((val8) << 8))
|
|
#define SET_DH(val8) DX = ((DX & 0x00ff) | ((val8) << 8))
|
|
|
|
#define GET_AL() ( AX & 0x00ff )
|
|
#define GET_BL() ( BX & 0x00ff )
|
|
#define GET_CL() ( CX & 0x00ff )
|
|
#define GET_DL() ( DX & 0x00ff )
|
|
#define GET_AH() ( AX >> 8 )
|
|
#define GET_BH() ( BX >> 8 )
|
|
#define GET_CH() ( CX >> 8 )
|
|
#define GET_DH() ( DX >> 8 )
|
|
|
|
#define GET_ELDL() ( ELDX & 0x00ff )
|
|
#define GET_ELDH() ( ELDX >> 8 )
|
|
|
|
#define SET_CF() FLAGS |= 0x0001
|
|
#define CLEAR_CF() FLAGS &= 0xfffe
|
|
#define GET_CF() (FLAGS & 0x0001)
|
|
|
|
#define SET_ZF() FLAGS |= 0x0040
|
|
#define CLEAR_ZF() FLAGS &= 0xffbf
|
|
#define GET_ZF() (FLAGS & 0x0040)
|
|
|
|
#define UNSUPPORTED_FUNCTION 0x86
|
|
|
|
#define none 0
|
|
#define MAX_SCAN_CODE 0x58
|
|
|
|
static struct {
|
|
Bit16u normal;
|
|
Bit16u shift;
|
|
Bit16u control;
|
|
Bit16u alt;
|
|
Bit8u lock_flags;
|
|
} scan_to_scanascii[MAX_SCAN_CODE + 1] = {
|
|
{ none, none, none, none, none },
|
|
{ 0x011b, 0x011b, 0x011b, 0x0100, none }, /* escape */
|
|
{ 0x0231, 0x0221, none, 0x7800, none }, /* 1! */
|
|
{ 0x0332, 0x0340, 0x0300, 0x7900, none }, /* 2@ */
|
|
{ 0x0433, 0x0423, none, 0x7a00, none }, /* 3# */
|
|
{ 0x0534, 0x0524, none, 0x7b00, none }, /* 4$ */
|
|
{ 0x0635, 0x0625, none, 0x7c00, none }, /* 5% */
|
|
{ 0x0736, 0x075e, 0x071e, 0x7d00, none }, /* 6^ */
|
|
{ 0x0837, 0x0826, none, 0x7e00, none }, /* 7& */
|
|
{ 0x0938, 0x092a, none, 0x7f00, none }, /* 8* */
|
|
{ 0x0a39, 0x0a28, none, 0x8000, none }, /* 9( */
|
|
{ 0x0b30, 0x0b29, none, 0x8100, none }, /* 0) */
|
|
{ 0x0c2d, 0x0c5f, 0x0c1f, 0x8200, none }, /* -_ */
|
|
{ 0x0d3d, 0x0d2b, none, 0x8300, none }, /* =+ */
|
|
{ 0x0e08, 0x0e08, 0x0e7f, none, none }, /* backspace */
|
|
{ 0x0f09, 0x0f00, none, none, none }, /* tab */
|
|
{ 0x1071, 0x1051, 0x1011, 0x1000, 0x40 }, /* Q */
|
|
{ 0x1177, 0x1157, 0x1117, 0x1100, 0x40 }, /* W */
|
|
{ 0x1265, 0x1245, 0x1205, 0x1200, 0x40 }, /* E */
|
|
{ 0x1372, 0x1352, 0x1312, 0x1300, 0x40 }, /* R */
|
|
{ 0x1474, 0x1454, 0x1414, 0x1400, 0x40 }, /* T */
|
|
{ 0x1579, 0x1559, 0x1519, 0x1500, 0x40 }, /* Y */
|
|
{ 0x1675, 0x1655, 0x1615, 0x1600, 0x40 }, /* U */
|
|
{ 0x1769, 0x1749, 0x1709, 0x1700, 0x40 }, /* I */
|
|
{ 0x186f, 0x184f, 0x180f, 0x1800, 0x40 }, /* O */
|
|
{ 0x1970, 0x1950, 0x1910, 0x1900, 0x40 }, /* P */
|
|
{ 0x1a5b, 0x1a7b, 0x1a1b, none, none }, /* [{ */
|
|
{ 0x1b5d, 0x1b7d, 0x1b1d, none, none }, /* ]} */
|
|
{ 0x1c0d, 0x1c0d, 0x1c0a, none, none }, /* Enter */
|
|
{ none, none, none, none, none }, /* L Ctrl */
|
|
{ 0x1e61, 0x1e41, 0x1e01, 0x1e00, 0x40 }, /* A */
|
|
{ 0x1f73, 0x1f53, 0x1f13, 0x1f00, 0x40 }, /* S */
|
|
{ 0x2064, 0x2044, 0x2004, 0x2000, 0x40 }, /* D */
|
|
{ 0x2166, 0x2146, 0x2106, 0x2100, 0x40 }, /* F */
|
|
{ 0x2267, 0x2247, 0x2207, 0x2200, 0x40 }, /* G */
|
|
{ 0x2368, 0x2348, 0x2308, 0x2300, 0x40 }, /* H */
|
|
{ 0x246a, 0x244a, 0x240a, 0x2400, 0x40 }, /* J */
|
|
{ 0x256b, 0x254b, 0x250b, 0x2500, 0x40 }, /* K */
|
|
{ 0x266c, 0x264c, 0x260c, 0x2600, 0x40 }, /* L */
|
|
{ 0x273b, 0x273a, none, none, none }, /* ;: */
|
|
{ 0x2827, 0x2822, none, none, none }, /* '" */
|
|
{ 0x2960, 0x297e, none, none, none }, /* `~ */
|
|
{ none, none, none, none, none }, /* L shift */
|
|
{ 0x2b5c, 0x2b7c, 0x2b1c, none, none }, /* |\ */
|
|
{ 0x2c7a, 0x2c5a, 0x2c1a, 0x2c00, 0x40 }, /* Z */
|
|
{ 0x2d78, 0x2d58, 0x2d18, 0x2d00, 0x40 }, /* X */
|
|
{ 0x2e63, 0x2e43, 0x2e03, 0x2e00, 0x40 }, /* C */
|
|
{ 0x2f76, 0x2f56, 0x2f16, 0x2f00, 0x40 }, /* V */
|
|
{ 0x3062, 0x3042, 0x3002, 0x3000, 0x40 }, /* B */
|
|
{ 0x316e, 0x314e, 0x310e, 0x3100, 0x40 }, /* N */
|
|
{ 0x326d, 0x324d, 0x320d, 0x3200, 0x40 }, /* M */
|
|
{ 0x332c, 0x333c, none, none, none }, /* ,< */
|
|
{ 0x342e, 0x343e, none, none, none }, /* .> */
|
|
{ 0x352f, 0x353f, none, none, none }, /* /? */
|
|
{ none, none, none, none, none }, /* R Shift */
|
|
{ 0x372a, 0x372a, none, none, none }, /* * */
|
|
{ none, none, none, none, none }, /* L Alt */
|
|
{ 0x3920, 0x3920, 0x3920, 0x3920, none }, /* space */
|
|
{ none, none, none, none, none }, /* caps lock */
|
|
{ 0x3b00, 0x5400, 0x5e00, 0x6800, none }, /* F1 */
|
|
{ 0x3c00, 0x5500, 0x5f00, 0x6900, none }, /* F2 */
|
|
{ 0x3d00, 0x5600, 0x6000, 0x6a00, none }, /* F3 */
|
|
{ 0x3e00, 0x5700, 0x6100, 0x6b00, none }, /* F4 */
|
|
{ 0x3f00, 0x5800, 0x6200, 0x6c00, none }, /* F5 */
|
|
{ 0x4000, 0x5900, 0x6300, 0x6d00, none }, /* F6 */
|
|
{ 0x4100, 0x5a00, 0x6400, 0x6e00, none }, /* F7 */
|
|
{ 0x4200, 0x5b00, 0x6500, 0x6f00, none }, /* F8 */
|
|
{ 0x4300, 0x5c00, 0x6600, 0x7000, none }, /* F9 */
|
|
{ 0x4400, 0x5d00, 0x6700, 0x7100, none }, /* F10 */
|
|
{ none, none, none, none, none }, /* Num Lock */
|
|
{ none, none, none, none, none }, /* Scroll Lock */
|
|
{ 0x4700, 0x4737, 0x7700, none, 0x20 }, /* 7 Home */
|
|
{ 0x4800, 0x4838, none, none, 0x20 }, /* 8 UP */
|
|
{ 0x4900, 0x4939, 0x8400, none, 0x20 }, /* 9 PgUp */
|
|
{ 0x4a2d, 0x4a2d, none, none, none }, /* - */
|
|
{ 0x4b00, 0x4b34, 0x7300, none, 0x20 }, /* 4 Left */
|
|
{ 0x4c00, 0x4c35, none, none, 0x20 }, /* 5 */
|
|
{ 0x4d00, 0x4d36, 0x7400, none, 0x20 }, /* 6 Right */
|
|
{ 0x4e2b, 0x4e2b, none, none, none }, /* + */
|
|
{ 0x4f00, 0x4f31, 0x7500, none, 0x20 }, /* 1 End */
|
|
{ 0x5000, 0x5032, none, none, 0x20 }, /* 2 Down */
|
|
{ 0x5100, 0x5133, 0x7600, none, 0x20 }, /* 3 PgDn */
|
|
{ 0x5200, 0x5230, none, none, 0x20 }, /* 0 Ins */
|
|
{ 0x5300, 0x532e, none, none, 0x20 }, /* Del */
|
|
{ none, none, none, none, none },
|
|
{ none, none, none, none, none },
|
|
{ 0x565c, 0x567c, none, none, none }, /* \| */
|
|
{ 0x5700, 0x5700, none, none, none }, /* F11 */
|
|
{ 0x5800, 0x5800, none, none, none } /* F12 */
|
|
};
|
|
|
|
Bit8u
|
|
inb(port)
|
|
Bit16u port;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push dx
|
|
mov dx, 4[bp]
|
|
in al, dx
|
|
pop dx
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
#if BX_USE_ATADRV
|
|
Bit16u
|
|
inw(port)
|
|
Bit16u port;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push dx
|
|
mov dx, 4[bp]
|
|
in ax, dx
|
|
pop dx
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
#endif
|
|
|
|
void
|
|
outb(port, val)
|
|
Bit16u port;
|
|
Bit8u val;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push ax
|
|
push dx
|
|
mov dx, 4[bp]
|
|
mov al, 6[bp]
|
|
out dx, al
|
|
pop dx
|
|
pop ax
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
#if BX_USE_ATADRV
|
|
void
|
|
outw(port, val)
|
|
Bit16u port;
|
|
Bit16u val;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push ax
|
|
push dx
|
|
mov dx, 4[bp]
|
|
mov ax, 6[bp]
|
|
out dx, ax
|
|
pop dx
|
|
pop ax
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
#endif
|
|
|
|
void
|
|
outb_cmos(cmos_reg, val)
|
|
Bit8u cmos_reg;
|
|
Bit8u val;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
mov al, 4[bp] ;; cmos_reg
|
|
out 0x70, al
|
|
mov al, 6[bp] ;; val
|
|
out 0x71, al
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
Bit8u
|
|
inb_cmos(cmos_reg)
|
|
Bit8u cmos_reg;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
mov al, 4[bp] ;; cmos_reg
|
|
out 0x70, al
|
|
in al, 0x71
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
void
|
|
init_rtc()
|
|
{
|
|
outb_cmos(0x0a, 0x26);
|
|
outb_cmos(0x0b, 0x02);
|
|
inb_cmos(0x0c);
|
|
inb_cmos(0x0d);
|
|
}
|
|
|
|
bx_bool
|
|
rtc_updating()
|
|
{
|
|
// This function checks to see if the update-in-progress bit
|
|
// is set in CMOS Status Register A. If not, it returns 0.
|
|
// If it is set, it tries to wait until there is a transition
|
|
// to 0, and will return 0 if such a transition occurs. A 1
|
|
// is returned only after timing out. The maximum period
|
|
// that this bit should be set is constrained to 244useconds.
|
|
// The count I use below guarantees coverage or more than
|
|
// this time, with any reasonable IPS setting.
|
|
|
|
Bit16u count;
|
|
|
|
count = 25000;
|
|
while (--count != 0) {
|
|
if ( (inb_cmos(0x0a) & 0x80) == 0 )
|
|
return(0);
|
|
}
|
|
return(1); // update-in-progress never transitioned to 0
|
|
}
|
|
|
|
|
|
Bit8u
|
|
read_byte(seg, offset)
|
|
Bit16u seg;
|
|
Bit16u offset;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push bx
|
|
push ds
|
|
mov ax, 4[bp] ; segment
|
|
mov ds, ax
|
|
mov bx, 6[bp] ; offset
|
|
mov al, [bx]
|
|
;; al = return value (byte)
|
|
pop ds
|
|
pop bx
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
Bit16u
|
|
read_word(seg, offset)
|
|
Bit16u seg;
|
|
Bit16u offset;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push bx
|
|
push ds
|
|
mov ax, 4[bp] ; segment
|
|
mov ds, ax
|
|
mov bx, 6[bp] ; offset
|
|
mov ax, [bx]
|
|
;; ax = return value (word)
|
|
pop ds
|
|
pop bx
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
void
|
|
write_byte(seg, offset, data)
|
|
Bit16u seg;
|
|
Bit16u offset;
|
|
Bit8u data;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push ax
|
|
push bx
|
|
push ds
|
|
mov ax, 4[bp] ; segment
|
|
mov ds, ax
|
|
mov bx, 6[bp] ; offset
|
|
mov al, 8[bp] ; data byte
|
|
mov [bx], al ; write data byte
|
|
pop ds
|
|
pop bx
|
|
pop ax
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
void
|
|
write_word(seg, offset, data)
|
|
Bit16u seg;
|
|
Bit16u offset;
|
|
Bit16u data;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push ax
|
|
push bx
|
|
push ds
|
|
mov ax, 4[bp] ; segment
|
|
mov ds, ax
|
|
mov bx, 6[bp] ; offset
|
|
mov ax, 8[bp] ; data word
|
|
mov [bx], ax ; write data word
|
|
pop ds
|
|
pop bx
|
|
pop ax
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
Bit16u
|
|
get_CS()
|
|
{
|
|
ASM_START
|
|
mov ax, cs
|
|
ASM_END
|
|
}
|
|
|
|
Bit16u
|
|
get_SS()
|
|
{
|
|
ASM_START
|
|
mov ax, ss
|
|
ASM_END
|
|
}
|
|
|
|
#if BX_DEBUG_SERIAL
|
|
/* serial debug port*/
|
|
#define BX_DEBUG_PORT 0x03f8
|
|
|
|
/* data */
|
|
#define UART_RBR 0x00
|
|
#define UART_THR 0x00
|
|
|
|
/* control */
|
|
#define UART_IER 0x01
|
|
#define UART_IIR 0x02
|
|
#define UART_FCR 0x02
|
|
#define UART_LCR 0x03
|
|
#define UART_MCR 0x04
|
|
#define UART_DLL 0x00
|
|
#define UART_DLM 0x01
|
|
|
|
/* status */
|
|
#define UART_LSR 0x05
|
|
#define UART_MSR 0x06
|
|
#define UART_SCR 0x07
|
|
|
|
int uart_can_tx_byte(base_port)
|
|
Bit16u base_port;
|
|
{
|
|
return inb(base_port + UART_LSR) & 0x20;
|
|
}
|
|
|
|
void uart_wait_to_tx_byte(base_port)
|
|
Bit16u base_port;
|
|
{
|
|
while (!uart_can_tx_byte(base_port));
|
|
}
|
|
|
|
void uart_wait_until_sent(base_port)
|
|
Bit16u base_port;
|
|
{
|
|
while (!(inb(base_port + UART_LSR) & 0x40));
|
|
}
|
|
|
|
void uart_tx_byte(base_port, data)
|
|
Bit16u base_port;
|
|
Bit8u data;
|
|
{
|
|
uart_wait_to_tx_byte(base_port);
|
|
outb(base_port + UART_THR, data);
|
|
uart_wait_until_sent(base_port);
|
|
}
|
|
#endif
|
|
|
|
void
|
|
wrch(c)
|
|
Bit8u c;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
push bx
|
|
mov ah, #0x0e
|
|
mov al, 4[bp]
|
|
xor bx,bx
|
|
int #0x10
|
|
pop bx
|
|
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
void
|
|
send(action, c)
|
|
Bit16u action;
|
|
Bit8u c;
|
|
{
|
|
#if BX_DEBUG_SERIAL
|
|
if (c == '\n') uart_tx_byte(BX_DEBUG_PORT, '\r');
|
|
uart_tx_byte(BX_DEBUG_PORT, c);
|
|
#endif
|
|
#if BX_VIRTUAL_PORTS
|
|
if (action & BIOS_PRINTF_DEBUG) outb(DEBUG_PORT, c);
|
|
if (action & BIOS_PRINTF_INFO) outb(INFO_PORT, c);
|
|
#endif
|
|
if (action & BIOS_PRINTF_SCREEN) {
|
|
if (c == '\n') wrch('\r');
|
|
wrch(c);
|
|
}
|
|
}
|
|
|
|
void
|
|
put_int(action, val, width, neg)
|
|
Bit16u action;
|
|
short val, width;
|
|
bx_bool neg;
|
|
{
|
|
short nval = val / 10;
|
|
if (nval)
|
|
put_int(action, nval, width - 1, neg);
|
|
else {
|
|
while (--width > 0) send(action, ' ');
|
|
if (neg) send(action, '-');
|
|
}
|
|
send(action, val - (nval * 10) + '0');
|
|
}
|
|
|
|
void
|
|
put_uint(action, val, width, neg)
|
|
Bit16u action;
|
|
unsigned short val;
|
|
short width;
|
|
bx_bool neg;
|
|
{
|
|
unsigned short nval = val / 10;
|
|
if (nval)
|
|
put_uint(action, nval, width - 1, neg);
|
|
else {
|
|
while (--width > 0) send(action, ' ');
|
|
if (neg) send(action, '-');
|
|
}
|
|
send(action, val - (nval * 10) + '0');
|
|
}
|
|
|
|
void
|
|
put_luint(action, val, width, neg)
|
|
Bit16u action;
|
|
unsigned long val;
|
|
short width;
|
|
bx_bool neg;
|
|
{
|
|
unsigned long nval = val / 10;
|
|
if (nval)
|
|
put_luint(action, nval, width - 1, neg);
|
|
else {
|
|
while (--width > 0) send(action, ' ');
|
|
if (neg) send(action, '-');
|
|
}
|
|
send(action, val - (nval * 10) + '0');
|
|
}
|
|
|
|
//--------------------------------------------------------------------------
|
|
// bios_printf()
|
|
// A compact variable argument printf function which prints its output via
|
|
// an I/O port so that it can be logged by Bochs/Plex.
|
|
// Currently, only %x is supported (or %02x, %04x, etc).
|
|
//
|
|
// Supports %[format_width][format]
|
|
// where format can be d,x,c,s
|
|
//--------------------------------------------------------------------------
|
|
void
|
|
bios_printf(action, s)
|
|
Bit16u action;
|
|
Bit8u *s;
|
|
{
|
|
Bit8u c, format_char;
|
|
bx_bool in_format;
|
|
short i;
|
|
Bit16u *arg_ptr;
|
|
Bit16u arg_seg, arg, nibble, hibyte, shift_count, format_width;
|
|
|
|
arg_ptr = &s;
|
|
arg_seg = get_SS();
|
|
|
|
in_format = 0;
|
|
format_width = 0;
|
|
|
|
if ((action & BIOS_PRINTF_DEBHALT) == BIOS_PRINTF_DEBHALT) {
|
|
#if BX_VIRTUAL_PORTS
|
|
outb(PANIC_PORT2, 0x00);
|
|
#endif
|
|
bios_printf (BIOS_PRINTF_SCREEN, "FATAL: ");
|
|
}
|
|
|
|
while (c = read_byte(get_CS(), s)) {
|
|
if ( c == '%' ) {
|
|
in_format = 1;
|
|
format_width = 0;
|
|
}
|
|
else if (in_format) {
|
|
if ( (c>='0') && (c<='9') ) {
|
|
format_width = (format_width * 10) + (c - '0');
|
|
}
|
|
else {
|
|
arg_ptr++; // increment to next arg
|
|
arg = read_word(arg_seg, arg_ptr);
|
|
if (c == 'x') {
|
|
if (format_width == 0)
|
|
format_width = 4;
|
|
for (i=format_width-1; i>=0; i--) {
|
|
nibble = (arg >> (4 * i)) & 0x000f;
|
|
send (action, (nibble<=9)? (nibble+'0') : (nibble-10+'A'));
|
|
}
|
|
}
|
|
else if (c == 'u') {
|
|
put_uint(action, arg, format_width, 0);
|
|
}
|
|
else if (c == 'l') {
|
|
s++;
|
|
arg_ptr++; /* increment to next arg */
|
|
hibyte = read_word(arg_seg, arg_ptr);
|
|
put_luint(action, ((Bit32u) hibyte << 16) | arg, format_width, 0);
|
|
}
|
|
else if (c == 'd') {
|
|
if (arg & 0x8000)
|
|
put_int(action, -arg, format_width - 1, 1);
|
|
else
|
|
put_int(action, arg, format_width, 0);
|
|
}
|
|
else if (c == 's') {
|
|
bios_printf(action & (~BIOS_PRINTF_HALT), arg);
|
|
}
|
|
else if (c == 'c') {
|
|
send(action, arg);
|
|
}
|
|
else
|
|
BX_PANIC("bios_printf: unknown format\n");
|
|
in_format = 0;
|
|
}
|
|
}
|
|
else {
|
|
send(action, c);
|
|
}
|
|
s ++;
|
|
}
|
|
|
|
if (action & BIOS_PRINTF_HALT) {
|
|
// freeze in a busy loop.
|
|
ASM_START
|
|
cli
|
|
halt2_loop:
|
|
hlt
|
|
jmp halt2_loop
|
|
ASM_END
|
|
}
|
|
}
|
|
|
|
//--------------------------------------------------------------------------
|
|
// keyboard_init
|
|
//--------------------------------------------------------------------------
|
|
// this file is based on LinuxBIOS implementation of keyboard.c
|
|
// could convert to #asm to gain space
|
|
void
|
|
keyboard_init()
|
|
{
|
|
Bit16u max;
|
|
|
|
/* ------------------- Flush buffers ------------------------*/
|
|
/* Wait until buffer is empty */
|
|
max=0xffff;
|
|
while ( (inb(0x64) & 0x02) && (--max>0)) outb(0x80, 0x00);
|
|
|
|
/* flush incoming keys */
|
|
max=0x2000;
|
|
while (--max > 0) {
|
|
outb(0x80, 0x00);
|
|
if (inb(0x64) & 0x01) {
|
|
inb(0x60);
|
|
max = 0x2000;
|
|
}
|
|
}
|
|
|
|
// Due to timer issues, and if the IPS setting is > 15000000,
|
|
// the incoming keys might not be flushed here. That will
|
|
// cause a panic a few lines below. See sourceforge bug report :
|
|
// [ 642031 ] FATAL: Keyboard RESET error:993
|
|
|
|
/* ------------------- controller side ----------------------*/
|
|
/* send cmd = 0xAA, self test 8042 */
|
|
outb(0x64, 0xaa);
|
|
|
|
/* Wait until buffer is empty */
|
|
max=0xffff;
|
|
while ( (inb(0x64) & 0x02) && (--max>0)) outb(0x80, 0x00);
|
|
if (max==0x0) keyboard_panic(00);
|
|
|
|
/* Wait for data */
|
|
max=0xffff;
|
|
while ( ((inb(0x64) & 0x01) == 0) && (--max>0) ) outb(0x80, 0x01);
|
|
if (max==0x0) keyboard_panic(01);
|
|
|
|
/* read self-test result, 0x55 should be returned from 0x60 */
|
|
if ((inb(0x60) != 0x55)){
|
|
keyboard_panic(991);
|
|
}
|
|
|
|
/* send cmd = 0xAB, keyboard interface test */
|
|
outb(0x64,0xab);
|
|
|
|
/* Wait until buffer is empty */
|
|
max=0xffff;
|
|
while ((inb(0x64) & 0x02) && (--max>0)) outb(0x80, 0x10);
|
|
if (max==0x0) keyboard_panic(10);
|
|
|
|
/* Wait for data */
|
|
max=0xffff;
|
|
while ( ((inb(0x64) & 0x01) == 0) && (--max>0) ) outb(0x80, 0x11);
|
|
if (max==0x0) keyboard_panic(11);
|
|
|
|
/* read keyboard interface test result, */
|
|
/* 0x00 should be returned form 0x60 */
|
|
if ((inb(0x60) != 0x00)) {
|
|
keyboard_panic(992);
|
|
}
|
|
|
|
/* Enable Keyboard clock */
|
|
outb(0x64,0xae);
|
|
outb(0x64,0xa8);
|
|
|
|
/* ------------------- keyboard side ------------------------*/
|
|
/* reset kerboard and self test (keyboard side) */
|
|
outb(0x60, 0xff);
|
|
|
|
/* Wait until buffer is empty */
|
|
max=0xffff;
|
|
while ((inb(0x64) & 0x02) && (--max>0)) outb(0x80, 0x20);
|
|
if (max==0x0) keyboard_panic(20);
|
|
|
|
/* Wait for data */
|
|
max=0xffff;
|
|
while ( ((inb(0x64) & 0x01) == 0) && (--max>0) ) outb(0x80, 0x21);
|
|
if (max==0x0) keyboard_panic(21);
|
|
|
|
/* keyboard should return ACK */
|
|
if ((inb(0x60) != 0xfa)) {
|
|
keyboard_panic(993);
|
|
}
|
|
|
|
/* Wait for data */
|
|
max=0xffff;
|
|
while ( ((inb(0x64) & 0x01) == 0) && (--max>0) ) outb(0x80, 0x31);
|
|
if (max==0x0) keyboard_panic(31);
|
|
|
|
if ((inb(0x60) != 0xaa)) {
|
|
keyboard_panic(994);
|
|
}
|
|
|
|
/* Disable keyboard */
|
|
outb(0x60, 0xf5);
|
|
|
|
/* Wait until buffer is empty */
|
|
max=0xffff;
|
|
while ((inb(0x64) & 0x02) && (--max>0)) outb(0x80, 0x40);
|
|
if (max==0x0) keyboard_panic(40);
|
|
|
|
/* Wait for data */
|
|
max=0xffff;
|
|
while ( ((inb(0x64) & 0x01) == 0) && (--max>0) ) outb(0x80, 0x41);
|
|
if (max==0x0) keyboard_panic(41);
|
|
|
|
/* keyboard should return ACK */
|
|
if ((inb(0x60) != 0xfa)) {
|
|
keyboard_panic(995);
|
|
}
|
|
|
|
/* Write Keyboard Mode */
|
|
outb(0x64, 0x60);
|
|
|
|
/* Wait until buffer is empty */
|
|
max=0xffff;
|
|
while ((inb(0x64) & 0x02) && (--max>0)) outb(0x80, 0x50);
|
|
if (max==0x0) keyboard_panic(50);
|
|
|
|
/* send cmd: scan code convert, disable mouse, enable IRQ 1 */
|
|
outb(0x60, 0x61);
|
|
|
|
/* Wait until buffer is empty */
|
|
max=0xffff;
|
|
while ((inb(0x64) & 0x02) && (--max>0)) outb(0x80, 0x60);
|
|
if (max==0x0) keyboard_panic(60);
|
|
|
|
/* Enable keyboard */
|
|
outb(0x60, 0xf4);
|
|
|
|
/* Wait until buffer is empty */
|
|
max=0xffff;
|
|
while ((inb(0x64) & 0x02) && (--max>0)) outb(0x80, 0x70);
|
|
if (max==0x0) keyboard_panic(70);
|
|
|
|
/* Wait for data */
|
|
max=0xffff;
|
|
while ( ((inb(0x64) & 0x01) == 0) && (--max>0) ) outb(0x80, 0x71);
|
|
if (max==0x0) keyboard_panic(70);
|
|
|
|
/* keyboard should return ACK */
|
|
if ((inb(0x60) != 0xfa)) {
|
|
keyboard_panic(996);
|
|
}
|
|
|
|
outb(0x80, 0x77);
|
|
}
|
|
|
|
//--------------------------------------------------------------------------
|
|
// keyboard_panic
|
|
//--------------------------------------------------------------------------
|
|
void
|
|
keyboard_panic(status)
|
|
Bit16u status;
|
|
{
|
|
// If you're getting a 993 keyboard panic here,
|
|
// please see the comment in keyboard_init
|
|
|
|
BX_PANIC("Keyboard error:%u\n",status);
|
|
}
|
|
|
|
//--------------------------------------------------------------------------
|
|
// shutdown_status_panic
|
|
// called when the shutdown statsu is not implemented, displays the status
|
|
//--------------------------------------------------------------------------
|
|
void
|
|
shutdown_status_panic(status)
|
|
Bit16u status;
|
|
{
|
|
BX_PANIC("Unimplemented shutdown status: %02x\n",(Bit8u)status);
|
|
}
|
|
|
|
//--------------------------------------------------------------------------
|
|
// print_bios_banner
|
|
// displays a the bios version
|
|
//--------------------------------------------------------------------------
|
|
void
|
|
print_bios_banner()
|
|
{
|
|
printf(BX_APPNAME" BIOS - build: %s\n%s\nOptions: ",
|
|
BIOS_BUILD_DATE, bios_cvs_version_string);
|
|
printf(
|
|
#if BX_APM
|
|
"apmbios "
|
|
#endif
|
|
#if BX_PCIBIOS
|
|
"pcibios "
|
|
#endif
|
|
#if BX_ELTORITO_BOOT
|
|
"eltorito "
|
|
#endif
|
|
#if BX_ROMBIOS32
|
|
"rombios32 "
|
|
#endif
|
|
"\n\n");
|
|
}
|
|
|
|
//--------------------------------------------------------------------------
|
|
// print_boot_device
|
|
// displays the boot device
|
|
//--------------------------------------------------------------------------
|
|
|
|
static char drivetypes[][10]={"Floppy","Hard Disk","CD-Rom"};
|
|
|
|
void
|
|
print_boot_device(cdboot, drive)
|
|
Bit8u cdboot; Bit16u drive;
|
|
{
|
|
Bit8u i;
|
|
|
|
// cdboot contains 0 if floppy/harddisk, 1 otherwise
|
|
// drive contains real/emulated boot drive
|
|
|
|
if(cdboot)i=2; // CD-Rom
|
|
else if((drive&0x0080)==0x00)i=0; // Floppy
|
|
else if((drive&0x0080)==0x80)i=1; // Hard drive
|
|
else return;
|
|
|
|
printf("Booting from %s...\n",drivetypes[i]);
|
|
}
|
|
|
|
//--------------------------------------------------------------------------
|
|
// print_boot_failure
|
|
// displays the reason why boot failed
|
|
//--------------------------------------------------------------------------
|
|
void
|
|
print_boot_failure(cdboot, drive, reason, lastdrive)
|
|
Bit8u cdboot; Bit8u drive; Bit8u lastdrive;
|
|
{
|
|
Bit16u drivenum = drive&0x7f;
|
|
|
|
// cdboot: 1 if boot from cd, 0 otherwise
|
|
// drive : drive number
|
|
// reason: 0 signature check failed, 1 read error
|
|
// lastdrive: 1 boot drive is the last one in boot sequence
|
|
|
|
if (cdboot)
|
|
bios_printf(BIOS_PRINTF_INFO | BIOS_PRINTF_SCREEN, "Boot from %s failed\n",drivetypes[2]);
|
|
else if (drive & 0x80)
|
|
bios_printf(BIOS_PRINTF_INFO | BIOS_PRINTF_SCREEN, "Boot from %s %d failed\n", drivetypes[1],drivenum);
|
|
else
|
|
bios_printf(BIOS_PRINTF_INFO | BIOS_PRINTF_SCREEN, "Boot from %s %d failed\n", drivetypes[0],drivenum);
|
|
|
|
if (lastdrive==1) {
|
|
if (reason==0)
|
|
BX_PANIC("Not a bootable disk\n");
|
|
else
|
|
BX_PANIC("Could not read the boot disk\n");
|
|
}
|
|
}
|
|
|
|
//--------------------------------------------------------------------------
|
|
// print_cdromboot_failure
|
|
// displays the reason why boot failed
|
|
//--------------------------------------------------------------------------
|
|
void
|
|
print_cdromboot_failure( code )
|
|
Bit16u code;
|
|
{
|
|
bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "CDROM boot failure code : %04x\n",code);
|
|
|
|
return;
|
|
}
|
|
|
|
void
|
|
nmi_handler_msg()
|
|
{
|
|
BX_PANIC("NMI Handler called\n");
|
|
}
|
|
|
|
void
|
|
int18_panic_msg()
|
|
{
|
|
BX_PANIC("INT18: BOOT FAILURE\n");
|
|
}
|
|
|
|
void
|
|
log_bios_start()
|
|
{
|
|
#if BX_DEBUG_SERIAL
|
|
outb(BX_DEBUG_PORT+UART_LCR, 0x03); /* setup for serial logging: 8N1 */
|
|
#endif
|
|
BX_INFO("%s\n", bios_cvs_version_string);
|
|
}
|
|
|
|
bx_bool
|
|
set_enable_a20(val)
|
|
bx_bool val;
|
|
{
|
|
Bit8u oldval;
|
|
|
|
// Use PS2 System Control port A to set A20 enable
|
|
|
|
// get current setting first
|
|
oldval = inb(0x92);
|
|
|
|
// change A20 status
|
|
if (val)
|
|
outb(0x92, oldval | 0x02);
|
|
else
|
|
outb(0x92, oldval & 0xfd);
|
|
|
|
return((oldval & 0x02) != 0);
|
|
}
|
|
|
|
void
|
|
debugger_on()
|
|
{
|
|
outb(0xfedc, 0x01);
|
|
}
|
|
|
|
void
|
|
debugger_off()
|
|
{
|
|
outb(0xfedc, 0x00);
|
|
}
|
|
|
|
#if BX_USE_ATADRV
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// Start of ATA/ATAPI Driver
|
|
// ---------------------------------------------------------------------------
|
|
|
|
// Global defines -- ATA register and register bits.
|
|
// command block & control block regs
|
|
#define ATA_CB_DATA 0 // data reg in/out pio_base_addr1+0
|
|
#define ATA_CB_ERR 1 // error in pio_base_addr1+1
|
|
#define ATA_CB_FR 1 // feature reg out pio_base_addr1+1
|
|
#define ATA_CB_SC 2 // sector count in/out pio_base_addr1+2
|
|
#define ATA_CB_SN 3 // sector number in/out pio_base_addr1+3
|
|
#define ATA_CB_CL 4 // cylinder low in/out pio_base_addr1+4
|
|
#define ATA_CB_CH 5 // cylinder high in/out pio_base_addr1+5
|
|
#define ATA_CB_DH 6 // device head in/out pio_base_addr1+6
|
|
#define ATA_CB_STAT 7 // primary status in pio_base_addr1+7
|
|
#define ATA_CB_CMD 7 // command out pio_base_addr1+7
|
|
#define ATA_CB_ASTAT 6 // alternate status in pio_base_addr2+6
|
|
#define ATA_CB_DC 6 // device control out pio_base_addr2+6
|
|
#define ATA_CB_DA 7 // device address in pio_base_addr2+7
|
|
|
|
#define ATA_CB_ER_ICRC 0x80 // ATA Ultra DMA bad CRC
|
|
#define ATA_CB_ER_BBK 0x80 // ATA bad block
|
|
#define ATA_CB_ER_UNC 0x40 // ATA uncorrected error
|
|
#define ATA_CB_ER_MC 0x20 // ATA media change
|
|
#define ATA_CB_ER_IDNF 0x10 // ATA id not found
|
|
#define ATA_CB_ER_MCR 0x08 // ATA media change request
|
|
#define ATA_CB_ER_ABRT 0x04 // ATA command aborted
|
|
#define ATA_CB_ER_NTK0 0x02 // ATA track 0 not found
|
|
#define ATA_CB_ER_NDAM 0x01 // ATA address mark not found
|
|
|
|
#define ATA_CB_ER_P_SNSKEY 0xf0 // ATAPI sense key (mask)
|
|
#define ATA_CB_ER_P_MCR 0x08 // ATAPI Media Change Request
|
|
#define ATA_CB_ER_P_ABRT 0x04 // ATAPI command abort
|
|
#define ATA_CB_ER_P_EOM 0x02 // ATAPI End of Media
|
|
#define ATA_CB_ER_P_ILI 0x01 // ATAPI Illegal Length Indication
|
|
|
|
// ATAPI Interrupt Reason bits in the Sector Count reg (CB_SC)
|
|
#define ATA_CB_SC_P_TAG 0xf8 // ATAPI tag (mask)
|
|
#define ATA_CB_SC_P_REL 0x04 // ATAPI release
|
|
#define ATA_CB_SC_P_IO 0x02 // ATAPI I/O
|
|
#define ATA_CB_SC_P_CD 0x01 // ATAPI C/D
|
|
|
|
// bits 7-4 of the device/head (CB_DH) reg
|
|
#define ATA_CB_DH_DEV0 0xa0 // select device 0
|
|
#define ATA_CB_DH_DEV1 0xb0 // select device 1
|
|
|
|
// status reg (CB_STAT and CB_ASTAT) bits
|
|
#define ATA_CB_STAT_BSY 0x80 // busy
|
|
#define ATA_CB_STAT_RDY 0x40 // ready
|
|
#define ATA_CB_STAT_DF 0x20 // device fault
|
|
#define ATA_CB_STAT_WFT 0x20 // write fault (old name)
|
|
#define ATA_CB_STAT_SKC 0x10 // seek complete
|
|
#define ATA_CB_STAT_SERV 0x10 // service
|
|
#define ATA_CB_STAT_DRQ 0x08 // data request
|
|
#define ATA_CB_STAT_CORR 0x04 // corrected
|
|
#define ATA_CB_STAT_IDX 0x02 // index
|
|
#define ATA_CB_STAT_ERR 0x01 // error (ATA)
|
|
#define ATA_CB_STAT_CHK 0x01 // check (ATAPI)
|
|
|
|
// device control reg (CB_DC) bits
|
|
#define ATA_CB_DC_HD15 0x08 // bit should always be set to one
|
|
#define ATA_CB_DC_SRST 0x04 // soft reset
|
|
#define ATA_CB_DC_NIEN 0x02 // disable interrupts
|
|
|
|
// Most mandtory and optional ATA commands (from ATA-3),
|
|
#define ATA_CMD_CFA_ERASE_SECTORS 0xC0
|
|
#define ATA_CMD_CFA_REQUEST_EXT_ERR_CODE 0x03
|
|
#define ATA_CMD_CFA_TRANSLATE_SECTOR 0x87
|
|
#define ATA_CMD_CFA_WRITE_MULTIPLE_WO_ERASE 0xCD
|
|
#define ATA_CMD_CFA_WRITE_SECTORS_WO_ERASE 0x38
|
|
#define ATA_CMD_CHECK_POWER_MODE1 0xE5
|
|
#define ATA_CMD_CHECK_POWER_MODE2 0x98
|
|
#define ATA_CMD_DEVICE_RESET 0x08
|
|
#define ATA_CMD_EXECUTE_DEVICE_DIAGNOSTIC 0x90
|
|
#define ATA_CMD_FLUSH_CACHE 0xE7
|
|
#define ATA_CMD_FORMAT_TRACK 0x50
|
|
#define ATA_CMD_IDENTIFY_DEVICE 0xEC
|
|
#define ATA_CMD_IDENTIFY_DEVICE_PACKET 0xA1
|
|
#define ATA_CMD_IDENTIFY_PACKET_DEVICE 0xA1
|
|
#define ATA_CMD_IDLE1 0xE3
|
|
#define ATA_CMD_IDLE2 0x97
|
|
#define ATA_CMD_IDLE_IMMEDIATE1 0xE1
|
|
#define ATA_CMD_IDLE_IMMEDIATE2 0x95
|
|
#define ATA_CMD_INITIALIZE_DRIVE_PARAMETERS 0x91
|
|
#define ATA_CMD_INITIALIZE_DEVICE_PARAMETERS 0x91
|
|
#define ATA_CMD_NOP 0x00
|
|
#define ATA_CMD_PACKET 0xA0
|
|
#define ATA_CMD_READ_BUFFER 0xE4
|
|
#define ATA_CMD_READ_DMA 0xC8
|
|
#define ATA_CMD_READ_DMA_QUEUED 0xC7
|
|
#define ATA_CMD_READ_MULTIPLE 0xC4
|
|
#define ATA_CMD_READ_SECTORS 0x20
|
|
#define ATA_CMD_READ_VERIFY_SECTORS 0x40
|
|
#define ATA_CMD_RECALIBRATE 0x10
|
|
#define ATA_CMD_SEEK 0x70
|
|
#define ATA_CMD_SET_FEATURES 0xEF
|
|
#define ATA_CMD_SET_MULTIPLE_MODE 0xC6
|
|
#define ATA_CMD_SLEEP1 0xE6
|
|
#define ATA_CMD_SLEEP2 0x99
|
|
#define ATA_CMD_STANDBY1 0xE2
|
|
#define ATA_CMD_STANDBY2 0x96
|
|
#define ATA_CMD_STANDBY_IMMEDIATE1 0xE0
|
|
#define ATA_CMD_STANDBY_IMMEDIATE2 0x94
|
|
#define ATA_CMD_WRITE_BUFFER 0xE8
|
|
#define ATA_CMD_WRITE_DMA 0xCA
|
|
#define ATA_CMD_WRITE_DMA_QUEUED 0xCC
|
|
#define ATA_CMD_WRITE_MULTIPLE 0xC5
|
|
#define ATA_CMD_WRITE_SECTORS 0x30
|
|
#define ATA_CMD_WRITE_VERIFY 0x3C
|
|
|
|
#define ATA_IFACE_NONE 0x00
|
|
#define ATA_IFACE_ISA 0x00
|
|
#define ATA_IFACE_PCI 0x01
|
|
|
|
#define ATA_TYPE_NONE 0x00
|
|
#define ATA_TYPE_UNKNOWN 0x01
|
|
#define ATA_TYPE_ATA 0x02
|
|
#define ATA_TYPE_ATAPI 0x03
|
|
|
|
#define ATA_DEVICE_NONE 0x00
|
|
#define ATA_DEVICE_HD 0xFF
|
|
#define ATA_DEVICE_CDROM 0x05
|
|
|
|
#define ATA_MODE_NONE 0x00
|
|
#define ATA_MODE_PIO16 0x00
|
|
#define ATA_MODE_PIO32 0x01
|
|
#define ATA_MODE_ISADMA 0x02
|
|
#define ATA_MODE_PCIDMA 0x03
|
|
#define ATA_MODE_USEIRQ 0x10
|
|
|
|
#define ATA_TRANSLATION_NONE 0
|
|
#define ATA_TRANSLATION_LBA 1
|
|
#define ATA_TRANSLATION_LARGE 2
|
|
#define ATA_TRANSLATION_RECHS 3
|
|
|
|
#define ATA_DATA_NO 0x00
|
|
#define ATA_DATA_IN 0x01
|
|
#define ATA_DATA_OUT 0x02
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// ATA/ATAPI driver : initialization
|
|
// ---------------------------------------------------------------------------
|
|
void ata_init( )
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit8u channel, device;
|
|
|
|
// Channels info init.
|
|
for (channel=0; channel<BX_MAX_ATA_INTERFACES; channel++) {
|
|
write_byte(ebda_seg,&EbdaData->ata.channels[channel].iface,ATA_IFACE_NONE);
|
|
write_word(ebda_seg,&EbdaData->ata.channels[channel].iobase1,0x0);
|
|
write_word(ebda_seg,&EbdaData->ata.channels[channel].iobase2,0x0);
|
|
write_byte(ebda_seg,&EbdaData->ata.channels[channel].irq,0);
|
|
}
|
|
|
|
// Devices info init.
|
|
for (device=0; device<BX_MAX_ATA_DEVICES; device++) {
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].type,ATA_TYPE_NONE);
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].device,ATA_DEVICE_NONE);
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].removable,0);
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].lock,0);
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].mode,ATA_MODE_NONE);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].blksize,0);
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].translation,ATA_TRANSLATION_NONE);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].lchs.heads,0);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].lchs.cylinders,0);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].lchs.spt,0);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].pchs.heads,0);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].pchs.cylinders,0);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].pchs.spt,0);
|
|
|
|
write_dword(ebda_seg,&EbdaData->ata.devices[device].sectors,0L);
|
|
}
|
|
|
|
// hdidmap and cdidmap init.
|
|
for (device=0; device<BX_MAX_ATA_DEVICES; device++) {
|
|
write_byte(ebda_seg,&EbdaData->ata.hdidmap[device],BX_MAX_ATA_DEVICES);
|
|
write_byte(ebda_seg,&EbdaData->ata.cdidmap[device],BX_MAX_ATA_DEVICES);
|
|
}
|
|
|
|
write_byte(ebda_seg,&EbdaData->ata.hdcount,0);
|
|
write_byte(ebda_seg,&EbdaData->ata.cdcount,0);
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// ATA/ATAPI driver : device detection
|
|
// ---------------------------------------------------------------------------
|
|
|
|
void ata_detect( )
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit8u hdcount, cdcount, device, type;
|
|
Bit8u buffer[0x0200];
|
|
|
|
#if BX_MAX_ATA_INTERFACES > 0
|
|
write_byte(ebda_seg,&EbdaData->ata.channels[0].iface,ATA_IFACE_ISA);
|
|
write_word(ebda_seg,&EbdaData->ata.channels[0].iobase1,0x1f0);
|
|
write_word(ebda_seg,&EbdaData->ata.channels[0].iobase2,0x3f0);
|
|
write_byte(ebda_seg,&EbdaData->ata.channels[0].irq,14);
|
|
#endif
|
|
#if BX_MAX_ATA_INTERFACES > 1
|
|
write_byte(ebda_seg,&EbdaData->ata.channels[1].iface,ATA_IFACE_ISA);
|
|
write_word(ebda_seg,&EbdaData->ata.channels[1].iobase1,0x170);
|
|
write_word(ebda_seg,&EbdaData->ata.channels[1].iobase2,0x370);
|
|
write_byte(ebda_seg,&EbdaData->ata.channels[1].irq,15);
|
|
#endif
|
|
#if BX_MAX_ATA_INTERFACES > 2
|
|
write_byte(ebda_seg,&EbdaData->ata.channels[2].iface,ATA_IFACE_ISA);
|
|
write_word(ebda_seg,&EbdaData->ata.channels[2].iobase1,0x1e8);
|
|
write_word(ebda_seg,&EbdaData->ata.channels[2].iobase2,0x3e0);
|
|
write_byte(ebda_seg,&EbdaData->ata.channels[2].irq,12);
|
|
#endif
|
|
#if BX_MAX_ATA_INTERFACES > 3
|
|
write_byte(ebda_seg,&EbdaData->ata.channels[3].iface,ATA_IFACE_ISA);
|
|
write_word(ebda_seg,&EbdaData->ata.channels[3].iobase1,0x168);
|
|
write_word(ebda_seg,&EbdaData->ata.channels[3].iobase2,0x360);
|
|
write_byte(ebda_seg,&EbdaData->ata.channels[3].irq,11);
|
|
#endif
|
|
#if BX_MAX_ATA_INTERFACES > 4
|
|
#error Please fill the ATA interface informations
|
|
#endif
|
|
|
|
// Device detection
|
|
hdcount=cdcount=0;
|
|
|
|
for(device=0; device<BX_MAX_ATA_DEVICES; device++) {
|
|
Bit16u iobase1, iobase2;
|
|
Bit8u channel, slave, shift;
|
|
Bit8u sc, sn, cl, ch, st;
|
|
|
|
channel = device / 2;
|
|
slave = device % 2;
|
|
|
|
iobase1 =read_word(ebda_seg,&EbdaData->ata.channels[channel].iobase1);
|
|
iobase2 =read_word(ebda_seg,&EbdaData->ata.channels[channel].iobase2);
|
|
|
|
// Disable interrupts
|
|
outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
|
|
|
|
// Look for device
|
|
outb(iobase1+ATA_CB_DH, slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0);
|
|
outb(iobase1+ATA_CB_SC, 0x55);
|
|
outb(iobase1+ATA_CB_SN, 0xaa);
|
|
outb(iobase1+ATA_CB_SC, 0xaa);
|
|
outb(iobase1+ATA_CB_SN, 0x55);
|
|
outb(iobase1+ATA_CB_SC, 0x55);
|
|
outb(iobase1+ATA_CB_SN, 0xaa);
|
|
|
|
// If we found something
|
|
sc = inb(iobase1+ATA_CB_SC);
|
|
sn = inb(iobase1+ATA_CB_SN);
|
|
|
|
if ( (sc == 0x55) && (sn == 0xaa) ) {
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].type,ATA_TYPE_UNKNOWN);
|
|
|
|
// reset the channel
|
|
ata_reset(device);
|
|
|
|
// check for ATA or ATAPI
|
|
outb(iobase1+ATA_CB_DH, slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0);
|
|
sc = inb(iobase1+ATA_CB_SC);
|
|
sn = inb(iobase1+ATA_CB_SN);
|
|
if ((sc==0x01) && (sn==0x01)) {
|
|
cl = inb(iobase1+ATA_CB_CL);
|
|
ch = inb(iobase1+ATA_CB_CH);
|
|
st = inb(iobase1+ATA_CB_STAT);
|
|
|
|
if ((cl==0x14) && (ch==0xeb)) {
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].type,ATA_TYPE_ATAPI);
|
|
} else if ((cl==0x00) && (ch==0x00) && (st!=0x00)) {
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].type,ATA_TYPE_ATA);
|
|
} else if ((cl==0xff) && (ch==0xff)) {
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].type,ATA_TYPE_NONE);
|
|
}
|
|
}
|
|
}
|
|
|
|
type=read_byte(ebda_seg,&EbdaData->ata.devices[device].type);
|
|
|
|
// Now we send a IDENTIFY command to ATA device
|
|
if(type == ATA_TYPE_ATA) {
|
|
Bit32u sectors;
|
|
Bit16u cylinders, heads, spt, blksize;
|
|
Bit8u translation, removable, mode;
|
|
|
|
//Temporary values to do the transfer
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].device,ATA_DEVICE_HD);
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].mode, ATA_MODE_PIO16);
|
|
|
|
if (ata_cmd_data_in(device,ATA_CMD_IDENTIFY_DEVICE, 1, 0, 0, 0, 0L, get_SS(),buffer) !=0 )
|
|
BX_PANIC("ata-detect: Failed to detect ATA device\n");
|
|
|
|
removable = (read_byte(get_SS(),buffer+0) & 0x80) ? 1 : 0;
|
|
mode = read_byte(get_SS(),buffer+96) ? ATA_MODE_PIO32 : ATA_MODE_PIO16;
|
|
blksize = read_word(get_SS(),buffer+10);
|
|
|
|
cylinders = read_word(get_SS(),buffer+(1*2)); // word 1
|
|
heads = read_word(get_SS(),buffer+(3*2)); // word 3
|
|
spt = read_word(get_SS(),buffer+(6*2)); // word 6
|
|
|
|
sectors = read_dword(get_SS(),buffer+(60*2)); // word 60 and word 61
|
|
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].device,ATA_DEVICE_HD);
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].removable, removable);
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].mode, mode);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].blksize, blksize);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].pchs.heads, heads);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].pchs.cylinders, cylinders);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].pchs.spt, spt);
|
|
write_dword(ebda_seg,&EbdaData->ata.devices[device].sectors, sectors);
|
|
BX_INFO("ata%d-%d: PCHS=%u/%d/%d translation=", channel, slave,cylinders, heads, spt);
|
|
|
|
translation = inb_cmos(0x39 + channel/2);
|
|
for (shift=device%4; shift>0; shift--) translation >>= 2;
|
|
translation &= 0x03;
|
|
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].translation, translation);
|
|
|
|
switch (translation) {
|
|
case ATA_TRANSLATION_NONE:
|
|
BX_INFO("none");
|
|
break;
|
|
case ATA_TRANSLATION_LBA:
|
|
BX_INFO("lba");
|
|
break;
|
|
case ATA_TRANSLATION_LARGE:
|
|
BX_INFO("large");
|
|
break;
|
|
case ATA_TRANSLATION_RECHS:
|
|
BX_INFO("r-echs");
|
|
break;
|
|
}
|
|
switch (translation) {
|
|
case ATA_TRANSLATION_NONE:
|
|
break;
|
|
case ATA_TRANSLATION_LBA:
|
|
spt = 63;
|
|
sectors /= 63;
|
|
heads = sectors / 1024;
|
|
if (heads>128) heads = 255;
|
|
else if (heads>64) heads = 128;
|
|
else if (heads>32) heads = 64;
|
|
else if (heads>16) heads = 32;
|
|
else heads=16;
|
|
cylinders = sectors / heads;
|
|
break;
|
|
case ATA_TRANSLATION_RECHS:
|
|
// Take care not to overflow
|
|
if (heads==16) {
|
|
if(cylinders>61439) cylinders=61439;
|
|
heads=15;
|
|
cylinders = (Bit16u)((Bit32u)(cylinders)*16/15);
|
|
}
|
|
// then go through the large bitshift process
|
|
case ATA_TRANSLATION_LARGE:
|
|
while(cylinders > 1024) {
|
|
cylinders >>= 1;
|
|
heads <<= 1;
|
|
|
|
// If we max out the head count
|
|
if (heads > 127) break;
|
|
}
|
|
break;
|
|
}
|
|
// clip to 1024 cylinders in lchs
|
|
if (cylinders > 1024) cylinders=1024;
|
|
BX_INFO(" LCHS=%d/%d/%d\n", cylinders, heads, spt);
|
|
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].lchs.heads, heads);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].lchs.cylinders, cylinders);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].lchs.spt, spt);
|
|
|
|
// fill hdidmap
|
|
write_byte(ebda_seg,&EbdaData->ata.hdidmap[hdcount], device);
|
|
hdcount++;
|
|
}
|
|
|
|
// Now we send a IDENTIFY command to ATAPI device
|
|
if(type == ATA_TYPE_ATAPI) {
|
|
|
|
Bit8u type, removable, mode;
|
|
Bit16u blksize;
|
|
|
|
//Temporary values to do the transfer
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].device,ATA_DEVICE_CDROM);
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].mode, ATA_MODE_PIO16);
|
|
|
|
if (ata_cmd_data_in(device,ATA_CMD_IDENTIFY_DEVICE_PACKET, 1, 0, 0, 0, 0L, get_SS(),buffer) != 0)
|
|
BX_PANIC("ata-detect: Failed to detect ATAPI device\n");
|
|
|
|
type = read_byte(get_SS(),buffer+1) & 0x1f;
|
|
removable = (read_byte(get_SS(),buffer+0) & 0x80) ? 1 : 0;
|
|
mode = read_byte(get_SS(),buffer+96) ? ATA_MODE_PIO32 : ATA_MODE_PIO16;
|
|
blksize = 2048;
|
|
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].device, type);
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].removable, removable);
|
|
write_byte(ebda_seg,&EbdaData->ata.devices[device].mode, mode);
|
|
write_word(ebda_seg,&EbdaData->ata.devices[device].blksize, blksize);
|
|
|
|
// fill cdidmap
|
|
write_byte(ebda_seg,&EbdaData->ata.cdidmap[cdcount], device);
|
|
cdcount++;
|
|
}
|
|
|
|
{
|
|
Bit32u sizeinmb;
|
|
Bit16u ataversion;
|
|
Bit8u c, i, version, model[41];
|
|
|
|
switch (type) {
|
|
case ATA_TYPE_ATA:
|
|
sizeinmb = read_dword(ebda_seg,&EbdaData->ata.devices[device].sectors);
|
|
sizeinmb >>= 11;
|
|
case ATA_TYPE_ATAPI:
|
|
// Read ATA/ATAPI version
|
|
ataversion=((Bit16u)(read_byte(get_SS(),buffer+161))<<8)|read_byte(get_SS(),buffer+160);
|
|
for(version=15;version>0;version--) {
|
|
if((ataversion&(1<<version))!=0)
|
|
break;
|
|
}
|
|
|
|
// Read model name
|
|
for(i=0;i<20;i++){
|
|
write_byte(get_SS(),model+(i*2),read_byte(get_SS(),buffer+(i*2)+54+1));
|
|
write_byte(get_SS(),model+(i*2)+1,read_byte(get_SS(),buffer+(i*2)+54));
|
|
}
|
|
|
|
// Reformat
|
|
write_byte(get_SS(),model+40,0x00);
|
|
for(i=39;i>0;i--){
|
|
if(read_byte(get_SS(),model+i)==0x20)
|
|
write_byte(get_SS(),model+i,0x00);
|
|
else break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
switch (type) {
|
|
case ATA_TYPE_ATA:
|
|
printf("ata%d %s: ",channel,slave?" slave":"master");
|
|
i=0; while(c=read_byte(get_SS(),model+i++)) printf("%c",c);
|
|
printf(" ATA-%d Hard-Disk (%lu MBytes)\n", version, sizeinmb);
|
|
break;
|
|
case ATA_TYPE_ATAPI:
|
|
printf("ata%d %s: ",channel,slave?" slave":"master");
|
|
i=0; while(c=read_byte(get_SS(),model+i++)) printf("%c",c);
|
|
if(read_byte(ebda_seg,&EbdaData->ata.devices[device].device)==ATA_DEVICE_CDROM)
|
|
printf(" ATAPI-%d CD-Rom/DVD-Rom\n",version);
|
|
else
|
|
printf(" ATAPI-%d Device\n",version);
|
|
break;
|
|
case ATA_TYPE_UNKNOWN:
|
|
printf("ata%d %s: Unknown device\n",channel,slave?" slave":"master");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Store the devices counts
|
|
write_byte(ebda_seg,&EbdaData->ata.hdcount, hdcount);
|
|
write_byte(ebda_seg,&EbdaData->ata.cdcount, cdcount);
|
|
write_byte(0x40,0x75, hdcount);
|
|
|
|
printf("\n");
|
|
|
|
// FIXME : should use bios=cmos|auto|disable bits
|
|
// FIXME : should know about translation bits
|
|
// FIXME : move hard_drive_post here
|
|
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// ATA/ATAPI driver : software reset
|
|
// ---------------------------------------------------------------------------
|
|
// ATA-3
|
|
// 8.2.1 Software reset - Device 0
|
|
|
|
void ata_reset(device)
|
|
Bit16u device;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit16u iobase1, iobase2;
|
|
Bit8u channel, slave, sn, sc;
|
|
Bit16u max;
|
|
|
|
channel = device / 2;
|
|
slave = device % 2;
|
|
|
|
iobase1 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase1);
|
|
iobase2 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase2);
|
|
|
|
// Reset
|
|
|
|
// 8.2.1 (a) -- set SRST in DC
|
|
outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN | ATA_CB_DC_SRST);
|
|
|
|
// 8.2.1 (b) -- wait for BSY
|
|
max=0xff;
|
|
while(--max>0) {
|
|
Bit8u status = inb(iobase1+ATA_CB_STAT);
|
|
if ((status & ATA_CB_STAT_BSY) != 0) break;
|
|
}
|
|
|
|
// 8.2.1 (f) -- clear SRST
|
|
outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
|
|
|
|
if (read_byte(ebda_seg,&EbdaData->ata.devices[device].type) != ATA_TYPE_NONE) {
|
|
|
|
// 8.2.1 (g) -- check for sc==sn==0x01
|
|
// select device
|
|
outb(iobase1+ATA_CB_DH, slave?ATA_CB_DH_DEV1:ATA_CB_DH_DEV0);
|
|
sc = inb(iobase1+ATA_CB_SC);
|
|
sn = inb(iobase1+ATA_CB_SN);
|
|
|
|
if ( (sc==0x01) && (sn==0x01) ) {
|
|
|
|
// 8.2.1 (h) -- wait for not BSY
|
|
max=0xff;
|
|
while(--max>0) {
|
|
Bit8u status = inb(iobase1+ATA_CB_STAT);
|
|
if ((status & ATA_CB_STAT_BSY) == 0) break;
|
|
}
|
|
}
|
|
}
|
|
|
|
// 8.2.1 (i) -- wait for DRDY
|
|
max=0xfff;
|
|
while(--max>0) {
|
|
Bit8u status = inb(iobase1+ATA_CB_STAT);
|
|
if ((status & ATA_CB_STAT_RDY) != 0) break;
|
|
}
|
|
|
|
// Enable interrupts
|
|
outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// ATA/ATAPI driver : execute a non data command
|
|
// ---------------------------------------------------------------------------
|
|
|
|
Bit16u ata_cmd_non_data()
|
|
{return 0;}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// ATA/ATAPI driver : execute a data-in command
|
|
// ---------------------------------------------------------------------------
|
|
// returns
|
|
// 0 : no error
|
|
// 1 : BUSY bit set
|
|
// 2 : read error
|
|
// 3 : expected DRQ=1
|
|
// 4 : no sectors left to read/verify
|
|
// 5 : more sectors to read/verify
|
|
// 6 : no sectors left to write
|
|
// 7 : more sectors to write
|
|
Bit16u ata_cmd_data_in(device, command, count, cylinder, head, sector, lba, segment, offset)
|
|
Bit16u device, command, count, cylinder, head, sector, segment, offset;
|
|
Bit32u lba;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit16u iobase1, iobase2, blksize;
|
|
Bit8u channel, slave;
|
|
Bit8u status, current, mode;
|
|
|
|
channel = device / 2;
|
|
slave = device % 2;
|
|
|
|
iobase1 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase1);
|
|
iobase2 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase2);
|
|
mode = read_byte(ebda_seg, &EbdaData->ata.devices[device].mode);
|
|
blksize = 0x200; // was = read_word(ebda_seg, &EbdaData->ata.devices[device].blksize);
|
|
if (mode == ATA_MODE_PIO32) blksize>>=2;
|
|
else blksize>>=1;
|
|
|
|
// sector will be 0 only on lba access. Convert to lba-chs
|
|
if (sector == 0) {
|
|
sector = (Bit16u) (lba & 0x000000ffL);
|
|
lba >>= 8;
|
|
cylinder = (Bit16u) (lba & 0x0000ffffL);
|
|
lba >>= 16;
|
|
head = ((Bit16u) (lba & 0x0000000fL)) | 0x40;
|
|
}
|
|
|
|
// Reset count of transferred data
|
|
write_word(ebda_seg, &EbdaData->ata.trsfsectors,0);
|
|
write_dword(ebda_seg, &EbdaData->ata.trsfbytes,0L);
|
|
current = 0;
|
|
|
|
status = inb(iobase1 + ATA_CB_STAT);
|
|
if (status & ATA_CB_STAT_BSY) return 1;
|
|
|
|
outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
|
|
outb(iobase1 + ATA_CB_FR, 0x00);
|
|
outb(iobase1 + ATA_CB_SC, count);
|
|
outb(iobase1 + ATA_CB_SN, sector);
|
|
outb(iobase1 + ATA_CB_CL, cylinder & 0x00ff);
|
|
outb(iobase1 + ATA_CB_CH, cylinder >> 8);
|
|
outb(iobase1 + ATA_CB_DH, (slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0) | (Bit8u) head );
|
|
outb(iobase1 + ATA_CB_CMD, command);
|
|
|
|
while (1) {
|
|
status = inb(iobase1 + ATA_CB_STAT);
|
|
if ( !(status & ATA_CB_STAT_BSY) ) break;
|
|
}
|
|
|
|
if (status & ATA_CB_STAT_ERR) {
|
|
BX_DEBUG_ATA("ata_cmd_data_in : read error\n");
|
|
return 2;
|
|
} else if ( !(status & ATA_CB_STAT_DRQ) ) {
|
|
BX_DEBUG_ATA("ata_cmd_data_in : DRQ not set (status %02x)\n", (unsigned) status);
|
|
return 3;
|
|
}
|
|
|
|
// FIXME : move seg/off translation here
|
|
|
|
ASM_START
|
|
sti ;; enable higher priority interrupts
|
|
ASM_END
|
|
|
|
while (1) {
|
|
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
mov di, _ata_cmd_data_in.offset + 2[bp]
|
|
mov ax, _ata_cmd_data_in.segment + 2[bp]
|
|
mov cx, _ata_cmd_data_in.blksize + 2[bp]
|
|
|
|
;; adjust if there will be an overrun. 2K max sector size
|
|
cmp di, #0xf800 ;;
|
|
jbe ata_in_no_adjust
|
|
|
|
ata_in_adjust:
|
|
sub di, #0x0800 ;; sub 2 kbytes from offset
|
|
add ax, #0x0080 ;; add 2 Kbytes to segment
|
|
|
|
ata_in_no_adjust:
|
|
mov es, ax ;; segment in es
|
|
|
|
mov dx, _ata_cmd_data_in.iobase1 + 2[bp] ;; ATA data read port
|
|
|
|
mov ah, _ata_cmd_data_in.mode + 2[bp]
|
|
cmp ah, #ATA_MODE_PIO32
|
|
je ata_in_32
|
|
|
|
ata_in_16:
|
|
rep
|
|
insw ;; CX words transfered from port(DX) to ES:[DI]
|
|
jmp ata_in_done
|
|
|
|
ata_in_32:
|
|
rep
|
|
insd ;; CX dwords transfered from port(DX) to ES:[DI]
|
|
|
|
ata_in_done:
|
|
mov _ata_cmd_data_in.offset + 2[bp], di
|
|
mov _ata_cmd_data_in.segment + 2[bp], es
|
|
pop bp
|
|
ASM_END
|
|
|
|
current++;
|
|
write_word(ebda_seg, &EbdaData->ata.trsfsectors,current);
|
|
count--;
|
|
status = inb(iobase1 + ATA_CB_STAT);
|
|
if (count == 0) {
|
|
if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR) )
|
|
!= ATA_CB_STAT_RDY ) {
|
|
BX_DEBUG_ATA("ata_cmd_data_in : no sectors left (status %02x)\n", (unsigned) status);
|
|
return 4;
|
|
}
|
|
break;
|
|
}
|
|
else {
|
|
if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR) )
|
|
!= (ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ) ) {
|
|
BX_DEBUG_ATA("ata_cmd_data_in : more sectors left (status %02x)\n", (unsigned) status);
|
|
return 5;
|
|
}
|
|
continue;
|
|
}
|
|
}
|
|
// Enable interrupts
|
|
outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
|
|
return 0;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// ATA/ATAPI driver : execute a data-out command
|
|
// ---------------------------------------------------------------------------
|
|
// returns
|
|
// 0 : no error
|
|
// 1 : BUSY bit set
|
|
// 2 : read error
|
|
// 3 : expected DRQ=1
|
|
// 4 : no sectors left to read/verify
|
|
// 5 : more sectors to read/verify
|
|
// 6 : no sectors left to write
|
|
// 7 : more sectors to write
|
|
Bit16u ata_cmd_data_out(device, command, count, cylinder, head, sector, lba, segment, offset)
|
|
Bit16u device, command, count, cylinder, head, sector, segment, offset;
|
|
Bit32u lba;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit16u iobase1, iobase2, blksize;
|
|
Bit8u channel, slave;
|
|
Bit8u status, current, mode;
|
|
|
|
channel = device / 2;
|
|
slave = device % 2;
|
|
|
|
iobase1 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase1);
|
|
iobase2 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase2);
|
|
mode = read_byte(ebda_seg, &EbdaData->ata.devices[device].mode);
|
|
blksize = 0x200; // was = read_word(ebda_seg, &EbdaData->ata.devices[device].blksize);
|
|
if (mode == ATA_MODE_PIO32) blksize>>=2;
|
|
else blksize>>=1;
|
|
|
|
// sector will be 0 only on lba access. Convert to lba-chs
|
|
if (sector == 0) {
|
|
sector = (Bit16u) (lba & 0x000000ffL);
|
|
lba >>= 8;
|
|
cylinder = (Bit16u) (lba & 0x0000ffffL);
|
|
lba >>= 16;
|
|
head = ((Bit16u) (lba & 0x0000000fL)) | 0x40;
|
|
}
|
|
|
|
// Reset count of transferred data
|
|
write_word(ebda_seg, &EbdaData->ata.trsfsectors,0);
|
|
write_dword(ebda_seg, &EbdaData->ata.trsfbytes,0L);
|
|
current = 0;
|
|
|
|
status = inb(iobase1 + ATA_CB_STAT);
|
|
if (status & ATA_CB_STAT_BSY) return 1;
|
|
|
|
outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
|
|
outb(iobase1 + ATA_CB_FR, 0x00);
|
|
outb(iobase1 + ATA_CB_SC, count);
|
|
outb(iobase1 + ATA_CB_SN, sector);
|
|
outb(iobase1 + ATA_CB_CL, cylinder & 0x00ff);
|
|
outb(iobase1 + ATA_CB_CH, cylinder >> 8);
|
|
outb(iobase1 + ATA_CB_DH, (slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0) | (Bit8u) head );
|
|
outb(iobase1 + ATA_CB_CMD, command);
|
|
|
|
while (1) {
|
|
status = inb(iobase1 + ATA_CB_STAT);
|
|
if ( !(status & ATA_CB_STAT_BSY) ) break;
|
|
}
|
|
|
|
if (status & ATA_CB_STAT_ERR) {
|
|
BX_DEBUG_ATA("ata_cmd_data_out : read error\n");
|
|
return 2;
|
|
} else if ( !(status & ATA_CB_STAT_DRQ) ) {
|
|
BX_DEBUG_ATA("ata_cmd_data_out : DRQ not set (status %02x)\n", (unsigned) status);
|
|
return 3;
|
|
}
|
|
|
|
// FIXME : move seg/off translation here
|
|
|
|
ASM_START
|
|
sti ;; enable higher priority interrupts
|
|
ASM_END
|
|
|
|
while (1) {
|
|
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
mov si, _ata_cmd_data_out.offset + 2[bp]
|
|
mov ax, _ata_cmd_data_out.segment + 2[bp]
|
|
mov cx, _ata_cmd_data_out.blksize + 2[bp]
|
|
|
|
;; adjust if there will be an overrun. 2K max sector size
|
|
cmp si, #0xf800 ;;
|
|
jbe ata_out_no_adjust
|
|
|
|
ata_out_adjust:
|
|
sub si, #0x0800 ;; sub 2 kbytes from offset
|
|
add ax, #0x0080 ;; add 2 Kbytes to segment
|
|
|
|
ata_out_no_adjust:
|
|
mov es, ax ;; segment in es
|
|
|
|
mov dx, _ata_cmd_data_out.iobase1 + 2[bp] ;; ATA data write port
|
|
|
|
mov ah, _ata_cmd_data_out.mode + 2[bp]
|
|
cmp ah, #ATA_MODE_PIO32
|
|
je ata_out_32
|
|
|
|
ata_out_16:
|
|
seg ES
|
|
rep
|
|
outsw ;; CX words transfered from port(DX) to ES:[SI]
|
|
jmp ata_out_done
|
|
|
|
ata_out_32:
|
|
seg ES
|
|
rep
|
|
outsd ;; CX dwords transfered from port(DX) to ES:[SI]
|
|
|
|
ata_out_done:
|
|
mov _ata_cmd_data_out.offset + 2[bp], si
|
|
mov _ata_cmd_data_out.segment + 2[bp], es
|
|
pop bp
|
|
ASM_END
|
|
|
|
current++;
|
|
write_word(ebda_seg, &EbdaData->ata.trsfsectors,current);
|
|
count--;
|
|
status = inb(iobase1 + ATA_CB_STAT);
|
|
if (count == 0) {
|
|
if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR) )
|
|
!= ATA_CB_STAT_RDY ) {
|
|
BX_DEBUG_ATA("ata_cmd_data_out : no sectors left (status %02x)\n", (unsigned) status);
|
|
return 6;
|
|
}
|
|
break;
|
|
}
|
|
else {
|
|
if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR) )
|
|
!= (ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ) ) {
|
|
BX_DEBUG_ATA("ata_cmd_data_out : more sectors left (status %02x)\n", (unsigned) status);
|
|
return 7;
|
|
}
|
|
continue;
|
|
}
|
|
}
|
|
// Enable interrupts
|
|
outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
|
|
return 0;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// ATA/ATAPI driver : execute a packet command
|
|
// ---------------------------------------------------------------------------
|
|
// returns
|
|
// 0 : no error
|
|
// 1 : error in parameters
|
|
// 2 : BUSY bit set
|
|
// 3 : error
|
|
// 4 : not ready
|
|
Bit16u ata_cmd_packet(device, cmdlen, cmdseg, cmdoff, header, length, inout, bufseg, bufoff)
|
|
Bit8u cmdlen,inout;
|
|
Bit16u device,cmdseg, cmdoff, bufseg, bufoff;
|
|
Bit16u header;
|
|
Bit32u length;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit16u iobase1, iobase2;
|
|
Bit16u lcount, lbefore, lafter, count;
|
|
Bit8u channel, slave;
|
|
Bit8u status, mode, lmode;
|
|
Bit32u total, transfer;
|
|
|
|
channel = device / 2;
|
|
slave = device % 2;
|
|
|
|
// Data out is not supported yet
|
|
if (inout == ATA_DATA_OUT) {
|
|
BX_INFO("ata_cmd_packet: DATA_OUT not supported yet\n");
|
|
return 1;
|
|
}
|
|
|
|
// The header length must be even
|
|
if (header & 1) {
|
|
BX_DEBUG_ATA("ata_cmd_packet : header must be even (%04x)\n",header);
|
|
return 1;
|
|
}
|
|
|
|
iobase1 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase1);
|
|
iobase2 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase2);
|
|
mode = read_byte(ebda_seg, &EbdaData->ata.devices[device].mode);
|
|
transfer= 0L;
|
|
|
|
if (cmdlen < 12) cmdlen=12;
|
|
if (cmdlen > 12) cmdlen=16;
|
|
cmdlen>>=1;
|
|
|
|
// Reset count of transferred data
|
|
write_word(ebda_seg, &EbdaData->ata.trsfsectors,0);
|
|
write_dword(ebda_seg, &EbdaData->ata.trsfbytes,0L);
|
|
|
|
status = inb(iobase1 + ATA_CB_STAT);
|
|
if (status & ATA_CB_STAT_BSY) return 2;
|
|
|
|
outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
|
|
// outb(iobase1 + ATA_CB_FR, 0x00);
|
|
// outb(iobase1 + ATA_CB_SC, 0x00);
|
|
// outb(iobase1 + ATA_CB_SN, 0x00);
|
|
outb(iobase1 + ATA_CB_CL, 0xfff0 & 0x00ff);
|
|
outb(iobase1 + ATA_CB_CH, 0xfff0 >> 8);
|
|
outb(iobase1 + ATA_CB_DH, slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0);
|
|
outb(iobase1 + ATA_CB_CMD, ATA_CMD_PACKET);
|
|
|
|
// Device should ok to receive command
|
|
while (1) {
|
|
status = inb(iobase1 + ATA_CB_STAT);
|
|
if ( !(status & ATA_CB_STAT_BSY) ) break;
|
|
}
|
|
|
|
if (status & ATA_CB_STAT_ERR) {
|
|
BX_DEBUG_ATA("ata_cmd_packet : error, status is %02x\n",status);
|
|
return 3;
|
|
} else if ( !(status & ATA_CB_STAT_DRQ) ) {
|
|
BX_DEBUG_ATA("ata_cmd_packet : DRQ not set (status %02x)\n", (unsigned) status);
|
|
return 4;
|
|
}
|
|
|
|
// Normalize address
|
|
cmdseg += (cmdoff / 16);
|
|
cmdoff %= 16;
|
|
|
|
// Send command to device
|
|
ASM_START
|
|
sti ;; enable higher priority interrupts
|
|
|
|
push bp
|
|
mov bp, sp
|
|
|
|
mov si, _ata_cmd_packet.cmdoff + 2[bp]
|
|
mov ax, _ata_cmd_packet.cmdseg + 2[bp]
|
|
mov cx, _ata_cmd_packet.cmdlen + 2[bp]
|
|
mov es, ax ;; segment in es
|
|
|
|
mov dx, _ata_cmd_packet.iobase1 + 2[bp] ;; ATA data write port
|
|
|
|
seg ES
|
|
rep
|
|
outsw ;; CX words transfered from port(DX) to ES:[SI]
|
|
|
|
pop bp
|
|
ASM_END
|
|
|
|
if (inout == ATA_DATA_NO) {
|
|
status = inb(iobase1 + ATA_CB_STAT);
|
|
}
|
|
else {
|
|
while (1) {
|
|
|
|
status = inb(iobase1 + ATA_CB_STAT);
|
|
|
|
// Check if command completed
|
|
if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_DRQ) ) ==0 ) break;
|
|
|
|
if (status & ATA_CB_STAT_ERR) {
|
|
BX_DEBUG_ATA("ata_cmd_packet : error (status %02x)\n",status);
|
|
return 3;
|
|
}
|
|
|
|
// Device must be ready to send data
|
|
if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR) )
|
|
!= (ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ) ) {
|
|
BX_DEBUG_ATA("ata_cmd_packet : not ready (status %02x)\n", status);
|
|
return 4;
|
|
}
|
|
|
|
// Normalize address
|
|
bufseg += (bufoff / 16);
|
|
bufoff %= 16;
|
|
|
|
// Get the byte count
|
|
lcount = ((Bit16u)(inb(iobase1 + ATA_CB_CH))<<8)+inb(iobase1 + ATA_CB_CL);
|
|
|
|
// adjust to read what we want
|
|
if(header>lcount) {
|
|
lbefore=lcount;
|
|
header-=lcount;
|
|
lcount=0;
|
|
}
|
|
else {
|
|
lbefore=header;
|
|
header=0;
|
|
lcount-=lbefore;
|
|
}
|
|
|
|
if(lcount>length) {
|
|
lafter=lcount-length;
|
|
lcount=length;
|
|
length=0;
|
|
}
|
|
else {
|
|
lafter=0;
|
|
length-=lcount;
|
|
}
|
|
|
|
// Save byte count
|
|
count = lcount;
|
|
|
|
BX_DEBUG_ATA("Trying to read %04x bytes (%04x %04x %04x) ",lbefore+lcount+lafter,lbefore,lcount,lafter);
|
|
BX_DEBUG_ATA("to 0x%04x:0x%04x\n",bufseg,bufoff);
|
|
|
|
// If counts not dividable by 4, use 16bits mode
|
|
lmode = mode;
|
|
if (lbefore & 0x03) lmode=ATA_MODE_PIO16;
|
|
if (lcount & 0x03) lmode=ATA_MODE_PIO16;
|
|
if (lafter & 0x03) lmode=ATA_MODE_PIO16;
|
|
|
|
// adds an extra byte if count are odd. before is always even
|
|
if (lcount & 0x01) {
|
|
lcount+=1;
|
|
if ((lafter > 0) && (lafter & 0x01)) {
|
|
lafter-=1;
|
|
}
|
|
}
|
|
|
|
if (lmode == ATA_MODE_PIO32) {
|
|
lcount>>=2; lbefore>>=2; lafter>>=2;
|
|
}
|
|
else {
|
|
lcount>>=1; lbefore>>=1; lafter>>=1;
|
|
}
|
|
|
|
; // FIXME bcc bug
|
|
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
mov dx, _ata_cmd_packet.iobase1 + 2[bp] ;; ATA data read port
|
|
|
|
mov cx, _ata_cmd_packet.lbefore + 2[bp]
|
|
jcxz ata_packet_no_before
|
|
|
|
mov ah, _ata_cmd_packet.lmode + 2[bp]
|
|
cmp ah, #ATA_MODE_PIO32
|
|
je ata_packet_in_before_32
|
|
|
|
ata_packet_in_before_16:
|
|
in ax, dx
|
|
loop ata_packet_in_before_16
|
|
jmp ata_packet_no_before
|
|
|
|
ata_packet_in_before_32:
|
|
push eax
|
|
ata_packet_in_before_32_loop:
|
|
in eax, dx
|
|
loop ata_packet_in_before_32_loop
|
|
pop eax
|
|
|
|
ata_packet_no_before:
|
|
mov cx, _ata_cmd_packet.lcount + 2[bp]
|
|
jcxz ata_packet_after
|
|
|
|
mov di, _ata_cmd_packet.bufoff + 2[bp]
|
|
mov ax, _ata_cmd_packet.bufseg + 2[bp]
|
|
mov es, ax
|
|
|
|
mov ah, _ata_cmd_packet.lmode + 2[bp]
|
|
cmp ah, #ATA_MODE_PIO32
|
|
je ata_packet_in_32
|
|
|
|
ata_packet_in_16:
|
|
rep
|
|
insw ;; CX words transfered tp port(DX) to ES:[DI]
|
|
jmp ata_packet_after
|
|
|
|
ata_packet_in_32:
|
|
rep
|
|
insd ;; CX dwords transfered to port(DX) to ES:[DI]
|
|
|
|
ata_packet_after:
|
|
mov cx, _ata_cmd_packet.lafter + 2[bp]
|
|
jcxz ata_packet_done
|
|
|
|
mov ah, _ata_cmd_packet.lmode + 2[bp]
|
|
cmp ah, #ATA_MODE_PIO32
|
|
je ata_packet_in_after_32
|
|
|
|
ata_packet_in_after_16:
|
|
in ax, dx
|
|
loop ata_packet_in_after_16
|
|
jmp ata_packet_done
|
|
|
|
ata_packet_in_after_32:
|
|
push eax
|
|
ata_packet_in_after_32_loop:
|
|
in eax, dx
|
|
loop ata_packet_in_after_32_loop
|
|
pop eax
|
|
|
|
ata_packet_done:
|
|
pop bp
|
|
ASM_END
|
|
|
|
// Compute new buffer address
|
|
bufoff += count;
|
|
|
|
// Save transferred bytes count
|
|
transfer += count;
|
|
write_dword(ebda_seg, &EbdaData->ata.trsfbytes,transfer);
|
|
}
|
|
}
|
|
|
|
// Final check, device must be ready
|
|
if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR) )
|
|
!= ATA_CB_STAT_RDY ) {
|
|
BX_DEBUG_ATA("ata_cmd_packet : not ready (status %02x)\n", (unsigned) status);
|
|
return 4;
|
|
}
|
|
|
|
// Enable interrupts
|
|
outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
|
|
return 0;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// End of ATA/ATAPI Driver
|
|
// ---------------------------------------------------------------------------
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// Start of ATA/ATAPI generic functions
|
|
// ---------------------------------------------------------------------------
|
|
|
|
Bit16u
|
|
atapi_get_sense(device)
|
|
Bit16u device;
|
|
{
|
|
Bit8u atacmd[12];
|
|
Bit8u buffer[16];
|
|
Bit8u i;
|
|
|
|
memsetb(get_SS(),atacmd,0,12);
|
|
|
|
// Request SENSE
|
|
atacmd[0]=0x03;
|
|
atacmd[4]=0x20;
|
|
if (ata_cmd_packet(device, 12, get_SS(), atacmd, 0, 16L, ATA_DATA_IN, get_SS(), buffer) != 0)
|
|
return 0x0002;
|
|
|
|
if ((buffer[0] & 0x7e) == 0x70) {
|
|
return (((Bit16u)buffer[2]&0x0f)*0x100)+buffer[12];
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
Bit16u
|
|
atapi_is_ready(device)
|
|
Bit16u device;
|
|
{
|
|
Bit8u atacmd[12];
|
|
Bit8u buffer[];
|
|
|
|
memsetb(get_SS(),atacmd,0,12);
|
|
|
|
// Test Unit Ready
|
|
if (ata_cmd_packet(device, 12, get_SS(), atacmd, 0, 0L, ATA_DATA_NO, get_SS(), buffer) != 0)
|
|
return 0x000f;
|
|
|
|
if (atapi_get_sense(device) !=0 ) {
|
|
memsetb(get_SS(),atacmd,0,12);
|
|
|
|
// try to send Test Unit Ready again
|
|
if (ata_cmd_packet(device, 12, get_SS(), atacmd, 0, 0L, ATA_DATA_NO, get_SS(), buffer) != 0)
|
|
return 0x000f;
|
|
|
|
return atapi_get_sense(device);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
Bit16u
|
|
atapi_is_cdrom(device)
|
|
Bit8u device;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
|
|
if (device >= BX_MAX_ATA_DEVICES)
|
|
return 0;
|
|
|
|
if (read_byte(ebda_seg,&EbdaData->ata.devices[device].type) != ATA_TYPE_ATAPI)
|
|
return 0;
|
|
|
|
if (read_byte(ebda_seg,&EbdaData->ata.devices[device].device) != ATA_DEVICE_CDROM)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// End of ATA/ATAPI generic functions
|
|
// ---------------------------------------------------------------------------
|
|
|
|
#endif // BX_USE_ATADRV
|
|
|
|
#if BX_ELTORITO_BOOT
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// Start of El-Torito boot functions
|
|
// ---------------------------------------------------------------------------
|
|
|
|
void
|
|
cdemu_init()
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
|
|
// the only important data is this one for now
|
|
write_byte(ebda_seg,&EbdaData->cdemu.active,0x00);
|
|
}
|
|
|
|
Bit8u
|
|
cdemu_isactive()
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
|
|
return(read_byte(ebda_seg,&EbdaData->cdemu.active));
|
|
}
|
|
|
|
Bit8u
|
|
cdemu_emulated_drive()
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
|
|
return(read_byte(ebda_seg,&EbdaData->cdemu.emulated_drive));
|
|
}
|
|
|
|
static char isotag[6]="CD001";
|
|
static char eltorito[24]="EL TORITO SPECIFICATION";
|
|
//
|
|
// Returns ah: emulated drive, al: error code
|
|
//
|
|
Bit16u
|
|
cdrom_boot()
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit8u atacmd[12], buffer[2048];
|
|
Bit32u lba;
|
|
Bit16u boot_segment, nbsectors, i, error;
|
|
Bit8u device;
|
|
|
|
// Find out the first cdrom
|
|
for (device=0; device<BX_MAX_ATA_DEVICES;device++) {
|
|
if (atapi_is_cdrom(device)) break;
|
|
}
|
|
|
|
// if not found
|
|
if(device >= BX_MAX_ATA_DEVICES) return 2;
|
|
|
|
// Read the Boot Record Volume Descriptor
|
|
memsetb(get_SS(),atacmd,0,12);
|
|
atacmd[0]=0x28; // READ command
|
|
atacmd[7]=(0x01 & 0xff00) >> 8; // Sectors
|
|
atacmd[8]=(0x01 & 0x00ff); // Sectors
|
|
atacmd[2]=(0x11 & 0xff000000) >> 24; // LBA
|
|
atacmd[3]=(0x11 & 0x00ff0000) >> 16;
|
|
atacmd[4]=(0x11 & 0x0000ff00) >> 8;
|
|
atacmd[5]=(0x11 & 0x000000ff);
|
|
if((error = ata_cmd_packet(device, 12, get_SS(), atacmd, 0, 2048L, ATA_DATA_IN, get_SS(), buffer)) != 0)
|
|
return 3;
|
|
|
|
// Validity checks
|
|
if(buffer[0]!=0)return 4;
|
|
for(i=0;i<5;i++){
|
|
if(buffer[1+i]!=read_byte(0xf000,&isotag[i]))return 5;
|
|
}
|
|
for(i=0;i<23;i++)
|
|
if(buffer[7+i]!=read_byte(0xf000,&eltorito[i]))return 6;
|
|
|
|
// ok, now we calculate the Boot catalog address
|
|
lba=buffer[0x4A]*0x1000000+buffer[0x49]*0x10000+buffer[0x48]*0x100+buffer[0x47];
|
|
|
|
// And we read the Boot Catalog
|
|
memsetb(get_SS(),atacmd,0,12);
|
|
atacmd[0]=0x28; // READ command
|
|
atacmd[7]=(0x01 & 0xff00) >> 8; // Sectors
|
|
atacmd[8]=(0x01 & 0x00ff); // Sectors
|
|
atacmd[2]=(lba & 0xff000000) >> 24; // LBA
|
|
atacmd[3]=(lba & 0x00ff0000) >> 16;
|
|
atacmd[4]=(lba & 0x0000ff00) >> 8;
|
|
atacmd[5]=(lba & 0x000000ff);
|
|
if((error = ata_cmd_packet(device, 12, get_SS(), atacmd, 0, 2048L, ATA_DATA_IN, get_SS(), buffer)) != 0)
|
|
return 7;
|
|
|
|
// Validation entry
|
|
if(buffer[0x00]!=0x01)return 8; // Header
|
|
if(buffer[0x01]!=0x00)return 9; // Platform
|
|
if(buffer[0x1E]!=0x55)return 10; // key 1
|
|
if(buffer[0x1F]!=0xAA)return 10; // key 2
|
|
|
|
// Initial/Default Entry
|
|
if(buffer[0x20]!=0x88)return 11; // Bootable
|
|
|
|
write_byte(ebda_seg,&EbdaData->cdemu.media,buffer[0x21]);
|
|
if(buffer[0x21]==0){
|
|
// FIXME ElTorito Hardcoded. cdrom is hardcoded as device 0xE0.
|
|
// Win2000 cd boot needs to know it booted from cd
|
|
write_byte(ebda_seg,&EbdaData->cdemu.emulated_drive,0xE0);
|
|
}
|
|
else if(buffer[0x21]<4)
|
|
write_byte(ebda_seg,&EbdaData->cdemu.emulated_drive,0x00);
|
|
else
|
|
write_byte(ebda_seg,&EbdaData->cdemu.emulated_drive,0x80);
|
|
|
|
write_byte(ebda_seg,&EbdaData->cdemu.controller_index,device/2);
|
|
write_byte(ebda_seg,&EbdaData->cdemu.device_spec,device%2);
|
|
|
|
boot_segment=buffer[0x23]*0x100+buffer[0x22];
|
|
if(boot_segment==0x0000)boot_segment=0x07C0;
|
|
|
|
write_word(ebda_seg,&EbdaData->cdemu.load_segment,boot_segment);
|
|
write_word(ebda_seg,&EbdaData->cdemu.buffer_segment,0x0000);
|
|
|
|
nbsectors=buffer[0x27]*0x100+buffer[0x26];
|
|
write_word(ebda_seg,&EbdaData->cdemu.sector_count,nbsectors);
|
|
|
|
lba=buffer[0x2B]*0x1000000+buffer[0x2A]*0x10000+buffer[0x29]*0x100+buffer[0x28];
|
|
write_dword(ebda_seg,&EbdaData->cdemu.ilba,lba);
|
|
|
|
// And we read the image in memory
|
|
memsetb(get_SS(),atacmd,0,12);
|
|
atacmd[0]=0x28; // READ command
|
|
atacmd[7]=((1+(nbsectors-1)/4) & 0xff00) >> 8; // Sectors
|
|
atacmd[8]=((1+(nbsectors-1)/4) & 0x00ff); // Sectors
|
|
atacmd[2]=(lba & 0xff000000) >> 24; // LBA
|
|
atacmd[3]=(lba & 0x00ff0000) >> 16;
|
|
atacmd[4]=(lba & 0x0000ff00) >> 8;
|
|
atacmd[5]=(lba & 0x000000ff);
|
|
if((error = ata_cmd_packet(device, 12, get_SS(), atacmd, 0, nbsectors*512L, ATA_DATA_IN, boot_segment,0)) != 0)
|
|
return 12;
|
|
|
|
// Remember the media type
|
|
switch(read_byte(ebda_seg,&EbdaData->cdemu.media)) {
|
|
case 0x01: // 1.2M floppy
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.spt,15);
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.cylinders,80);
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.heads,2);
|
|
break;
|
|
case 0x02: // 1.44M floppy
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.spt,18);
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.cylinders,80);
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.heads,2);
|
|
break;
|
|
case 0x03: // 2.88M floppy
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.spt,36);
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.cylinders,80);
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.heads,2);
|
|
break;
|
|
case 0x04: // Harddrive
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.spt,read_byte(boot_segment,446+6)&0x3f);
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.cylinders,
|
|
(read_byte(boot_segment,446+6)<<2) + read_byte(boot_segment,446+7) + 1);
|
|
write_word(ebda_seg,&EbdaData->cdemu.vdevice.heads,read_byte(boot_segment,446+5) + 1);
|
|
break;
|
|
}
|
|
|
|
if(read_byte(ebda_seg,&EbdaData->cdemu.media)!=0) {
|
|
// Increase bios installed hardware number of devices
|
|
if(read_byte(ebda_seg,&EbdaData->cdemu.emulated_drive)==0x00)
|
|
write_byte(0x40,0x10,read_byte(0x40,0x10)|0x41);
|
|
else
|
|
write_byte(ebda_seg, &EbdaData->ata.hdcount, read_byte(ebda_seg, &EbdaData->ata.hdcount) + 1);
|
|
}
|
|
|
|
|
|
// everything is ok, so from now on, the emulation is active
|
|
if(read_byte(ebda_seg,&EbdaData->cdemu.media)!=0)
|
|
write_byte(ebda_seg,&EbdaData->cdemu.active,0x01);
|
|
|
|
// return the boot drive + no error
|
|
return (read_byte(ebda_seg,&EbdaData->cdemu.emulated_drive)*0x100)+0;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// End of El-Torito boot functions
|
|
// ---------------------------------------------------------------------------
|
|
#endif // BX_ELTORITO_BOOT
|
|
|
|
void
|
|
int14_function(regs, ds, iret_addr)
|
|
pusha_regs_t regs; // regs pushed from PUSHA instruction
|
|
Bit16u ds; // previous DS:, DS set to 0x0000 by asm wrapper
|
|
iret_addr_t iret_addr; // CS,IP,Flags pushed from original INT call
|
|
{
|
|
Bit16u addr,timer,val16;
|
|
Bit8u timeout;
|
|
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
|
|
addr = read_word(0x0040, (regs.u.r16.dx << 1));
|
|
timeout = read_byte(0x0040, 0x007C + regs.u.r16.dx);
|
|
if ((regs.u.r16.dx < 4) && (addr > 0)) {
|
|
switch (regs.u.r8.ah) {
|
|
case 0:
|
|
outb(addr+3, inb(addr+3) | 0x80);
|
|
if (regs.u.r8.al & 0xE0 == 0) {
|
|
outb(addr, 0x17);
|
|
outb(addr+1, 0x04);
|
|
} else {
|
|
val16 = 0x600 >> ((regs.u.r8.al & 0xE0) >> 5);
|
|
outb(addr, val16 & 0xFF);
|
|
outb(addr+1, val16 >> 8);
|
|
}
|
|
outb(addr+3, regs.u.r8.al & 0x1F);
|
|
regs.u.r8.ah = inb(addr+5);
|
|
regs.u.r8.al = inb(addr+6);
|
|
ClearCF(iret_addr.flags);
|
|
break;
|
|
case 1:
|
|
timer = read_word(0x0040, 0x006C);
|
|
while (((inb(addr+5) & 0x60) != 0x60) && (timeout)) {
|
|
val16 = read_word(0x0040, 0x006C);
|
|
if (val16 != timer) {
|
|
timer = val16;
|
|
timeout--;
|
|
}
|
|
}
|
|
if (timeout) outb(addr, regs.u.r8.al);
|
|
regs.u.r8.ah = inb(addr+5);
|
|
if (!timeout) regs.u.r8.ah |= 0x80;
|
|
ClearCF(iret_addr.flags);
|
|
break;
|
|
case 2:
|
|
timer = read_word(0x0040, 0x006C);
|
|
while (((inb(addr+5) & 0x01) == 0) && (timeout)) {
|
|
val16 = read_word(0x0040, 0x006C);
|
|
if (val16 != timer) {
|
|
timer = val16;
|
|
timeout--;
|
|
}
|
|
}
|
|
if (timeout) {
|
|
regs.u.r8.ah = 0;
|
|
regs.u.r8.al = inb(addr);
|
|
} else {
|
|
regs.u.r8.ah = inb(addr+5);
|
|
}
|
|
ClearCF(iret_addr.flags);
|
|
break;
|
|
case 3:
|
|
regs.u.r8.ah = inb(addr+5);
|
|
regs.u.r8.al = inb(addr+6);
|
|
ClearCF(iret_addr.flags);
|
|
break;
|
|
default:
|
|
SetCF(iret_addr.flags); // Unsupported
|
|
}
|
|
} else {
|
|
SetCF(iret_addr.flags); // Unsupported
|
|
}
|
|
}
|
|
|
|
void
|
|
int15_function(regs, ES, DS, FLAGS)
|
|
pusha_regs_t regs; // REGS pushed via pusha
|
|
Bit16u ES, DS, FLAGS;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
bx_bool prev_a20_enable;
|
|
Bit16u base15_00;
|
|
Bit8u base23_16;
|
|
Bit16u ss;
|
|
Bit16u CX,DX;
|
|
|
|
Bit16u bRegister;
|
|
Bit8u irqDisable;
|
|
|
|
BX_DEBUG_INT15("int15 AX=%04x\n",regs.u.r16.ax);
|
|
|
|
switch (regs.u.r8.ah) {
|
|
case 0x24: /* A20 Control */
|
|
switch (regs.u.r8.al) {
|
|
case 0x00:
|
|
set_enable_a20(0);
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
break;
|
|
case 0x01:
|
|
set_enable_a20(1);
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
break;
|
|
case 0x02:
|
|
regs.u.r8.al = (inb(0x92) >> 1) & 0x01;
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
break;
|
|
case 0x03:
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
regs.u.r16.bx = 3;
|
|
break;
|
|
default:
|
|
BX_INFO("int15: Func 24h, subfunc %02xh, A20 gate control not supported\n", (unsigned) regs.u.r8.al);
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
}
|
|
break;
|
|
|
|
case 0x41:
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
break;
|
|
|
|
case 0x4f:
|
|
/* keyboard intercept */
|
|
#if BX_CPU < 2
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
#else
|
|
// nop
|
|
#endif
|
|
SET_CF();
|
|
break;
|
|
|
|
case 0x52: // removable media eject
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0; // "ok ejection may proceed"
|
|
break;
|
|
|
|
case 0x83: {
|
|
if( regs.u.r8.al == 0 ) {
|
|
// Set Interval requested.
|
|
if( ( read_byte( 0x40, 0xA0 ) & 1 ) == 0 ) {
|
|
// Interval not already set.
|
|
write_byte( 0x40, 0xA0, 1 ); // Set status byte.
|
|
write_word( 0x40, 0x98, ES ); // Byte location, segment
|
|
write_word( 0x40, 0x9A, regs.u.r16.bx ); // Byte location, offset
|
|
write_word( 0x40, 0x9C, regs.u.r16.dx ); // Low word, delay
|
|
write_word( 0x40, 0x9E, regs.u.r16.cx ); // High word, delay.
|
|
CLEAR_CF( );
|
|
irqDisable = inb( 0xA1 );
|
|
outb( 0xA1, irqDisable & 0xFE );
|
|
bRegister = inb_cmos( 0xB ); // Unmask IRQ8 so INT70 will get through.
|
|
outb_cmos( 0xB, bRegister | 0x40 ); // Turn on the Periodic Interrupt timer
|
|
} else {
|
|
// Interval already set.
|
|
BX_DEBUG_INT15("int15: Func 83h, failed, already waiting.\n" );
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
}
|
|
} else if( regs.u.r8.al == 1 ) {
|
|
// Clear Interval requested
|
|
write_byte( 0x40, 0xA0, 0 ); // Clear status byte
|
|
CLEAR_CF( );
|
|
bRegister = inb_cmos( 0xB );
|
|
outb_cmos( 0xB, bRegister & ~0x40 ); // Turn off the Periodic Interrupt timer
|
|
} else {
|
|
BX_DEBUG_INT15("int15: Func 83h, failed.\n" );
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
regs.u.r8.al--;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
case 0x87:
|
|
#if BX_CPU < 3
|
|
# error "Int15 function 87h not supported on < 80386"
|
|
#endif
|
|
// +++ should probably have descriptor checks
|
|
// +++ should have exception handlers
|
|
|
|
// turn off interrupts
|
|
ASM_START
|
|
cli
|
|
ASM_END
|
|
|
|
prev_a20_enable = set_enable_a20(1); // enable A20 line
|
|
|
|
// 128K max of transfer on 386+ ???
|
|
// source == destination ???
|
|
|
|
// ES:SI points to descriptor table
|
|
// offset use initially comments
|
|
// ==============================================
|
|
// 00..07 Unused zeros Null descriptor
|
|
// 08..0f GDT zeros filled in by BIOS
|
|
// 10..17 source ssssssss source of data
|
|
// 18..1f dest dddddddd destination of data
|
|
// 20..27 CS zeros filled in by BIOS
|
|
// 28..2f SS zeros filled in by BIOS
|
|
|
|
//es:si
|
|
//eeee0
|
|
//0ssss
|
|
//-----
|
|
|
|
// check for access rights of source & dest here
|
|
|
|
// Initialize GDT descriptor
|
|
base15_00 = (ES << 4) + regs.u.r16.si;
|
|
base23_16 = ES >> 12;
|
|
if (base15_00 < (ES<<4))
|
|
base23_16++;
|
|
write_word(ES, regs.u.r16.si+0x08+0, 47); // limit 15:00 = 6 * 8bytes/descriptor
|
|
write_word(ES, regs.u.r16.si+0x08+2, base15_00);// base 15:00
|
|
write_byte(ES, regs.u.r16.si+0x08+4, base23_16);// base 23:16
|
|
write_byte(ES, regs.u.r16.si+0x08+5, 0x93); // access
|
|
write_word(ES, regs.u.r16.si+0x08+6, 0x0000); // base 31:24/reserved/limit 19:16
|
|
|
|
// Initialize CS descriptor
|
|
write_word(ES, regs.u.r16.si+0x20+0, 0xffff);// limit 15:00 = normal 64K limit
|
|
write_word(ES, regs.u.r16.si+0x20+2, 0x0000);// base 15:00
|
|
write_byte(ES, regs.u.r16.si+0x20+4, 0x000f);// base 23:16
|
|
write_byte(ES, regs.u.r16.si+0x20+5, 0x9b); // access
|
|
write_word(ES, regs.u.r16.si+0x20+6, 0x0000);// base 31:24/reserved/limit 19:16
|
|
|
|
// Initialize SS descriptor
|
|
ss = get_SS();
|
|
base15_00 = ss << 4;
|
|
base23_16 = ss >> 12;
|
|
write_word(ES, regs.u.r16.si+0x28+0, 0xffff); // limit 15:00 = normal 64K limit
|
|
write_word(ES, regs.u.r16.si+0x28+2, base15_00);// base 15:00
|
|
write_byte(ES, regs.u.r16.si+0x28+4, base23_16);// base 23:16
|
|
write_byte(ES, regs.u.r16.si+0x28+5, 0x93); // access
|
|
write_word(ES, regs.u.r16.si+0x28+6, 0x0000); // base 31:24/reserved/limit 19:16
|
|
|
|
CX = regs.u.r16.cx;
|
|
ASM_START
|
|
// Compile generates locals offset info relative to SP.
|
|
// Get CX (word count) from stack.
|
|
mov bx, sp
|
|
SEG SS
|
|
mov cx, _int15_function.CX [bx]
|
|
|
|
// since we need to set SS:SP, save them to the BDA
|
|
// for future restore
|
|
push eax
|
|
xor eax, eax
|
|
mov ds, ax
|
|
mov 0x0469, ss
|
|
mov 0x0467, sp
|
|
|
|
SEG ES
|
|
lgdt [si + 0x08]
|
|
SEG CS
|
|
lidt [pmode_IDT_info]
|
|
;; perhaps do something with IDT here
|
|
|
|
;; set PE bit in CR0
|
|
mov eax, cr0
|
|
or al, #0x01
|
|
mov cr0, eax
|
|
;; far jump to flush CPU queue after transition to protected mode
|
|
JMP_AP(0x0020, protected_mode)
|
|
|
|
protected_mode:
|
|
;; GDT points to valid descriptor table, now load SS, DS, ES
|
|
mov ax, #0x28 ;; 101 000 = 5th descriptor in table, TI=GDT, RPL=00
|
|
mov ss, ax
|
|
mov ax, #0x10 ;; 010 000 = 2nd descriptor in table, TI=GDT, RPL=00
|
|
mov ds, ax
|
|
mov ax, #0x18 ;; 011 000 = 3rd descriptor in table, TI=GDT, RPL=00
|
|
mov es, ax
|
|
xor si, si
|
|
xor di, di
|
|
cld
|
|
rep
|
|
movsw ;; move CX words from DS:SI to ES:DI
|
|
|
|
;; make sure DS and ES limits are 64KB
|
|
mov ax, #0x28
|
|
mov ds, ax
|
|
mov es, ax
|
|
|
|
;; reset PG bit in CR0 ???
|
|
mov eax, cr0
|
|
and al, #0xFE
|
|
mov cr0, eax
|
|
|
|
;; far jump to flush CPU queue after transition to real mode
|
|
JMP_AP(0xf000, real_mode)
|
|
|
|
real_mode:
|
|
;; restore IDT to normal real-mode defaults
|
|
SEG CS
|
|
lidt [rmode_IDT_info]
|
|
|
|
// restore SS:SP from the BDA
|
|
xor ax, ax
|
|
mov ds, ax
|
|
mov ss, 0x0469
|
|
mov sp, 0x0467
|
|
pop eax
|
|
ASM_END
|
|
|
|
set_enable_a20(prev_a20_enable);
|
|
|
|
// turn back on interrupts
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
|
|
regs.u.r8.ah = 0;
|
|
CLEAR_CF();
|
|
break;
|
|
|
|
|
|
case 0x88:
|
|
// Get the amount of extended memory (above 1M)
|
|
#if BX_CPU < 2
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
SET_CF();
|
|
#else
|
|
regs.u.r8.al = inb_cmos(0x30);
|
|
regs.u.r8.ah = inb_cmos(0x31);
|
|
|
|
// According to Ralf Brown's interrupt the limit should be 15M,
|
|
// but real machines mostly return max. 63M.
|
|
if(regs.u.r16.ax > 0xffc0)
|
|
regs.u.r16.ax = 0xffc0;
|
|
|
|
CLEAR_CF();
|
|
#endif
|
|
break;
|
|
|
|
case 0x90:
|
|
/* Device busy interrupt. Called by Int 16h when no key available */
|
|
break;
|
|
|
|
case 0x91:
|
|
/* Interrupt complete. Called by Int 16h when key becomes available */
|
|
break;
|
|
|
|
case 0xbf:
|
|
BX_INFO("*** int 15h function AH=bf not yet supported!\n");
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
break;
|
|
|
|
case 0xC0:
|
|
#if 0
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
break;
|
|
#endif
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
regs.u.r16.bx = BIOS_CONFIG_TABLE;
|
|
ES = 0xF000;
|
|
break;
|
|
|
|
case 0xc1:
|
|
ES = ebda_seg;
|
|
CLEAR_CF();
|
|
break;
|
|
|
|
case 0xd8:
|
|
bios_printf(BIOS_PRINTF_DEBUG, "EISA BIOS not present\n");
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
break;
|
|
|
|
default:
|
|
BX_INFO("*** int 15h function AX=%04x, BX=%04x not yet supported!\n",
|
|
(unsigned) regs.u.r16.ax, (unsigned) regs.u.r16.bx);
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
break;
|
|
}
|
|
}
|
|
|
|
#if BX_USE_PS2_MOUSE
|
|
void
|
|
int15_function_mouse(regs, ES, DS, FLAGS)
|
|
pusha_regs_t regs; // REGS pushed via pusha
|
|
Bit16u ES, DS, FLAGS;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit8u mouse_flags_1, mouse_flags_2;
|
|
Bit16u mouse_driver_seg;
|
|
Bit16u mouse_driver_offset;
|
|
Bit8u comm_byte, prev_command_byte;
|
|
Bit8u ret, mouse_data1, mouse_data2, mouse_data3;
|
|
|
|
BX_DEBUG_INT15("int15 AX=%04x\n",regs.u.r16.ax);
|
|
|
|
switch (regs.u.r8.ah) {
|
|
case 0xC2:
|
|
// Return Codes status in AH
|
|
// =========================
|
|
// 00: success
|
|
// 01: invalid subfunction (AL > 7)
|
|
// 02: invalid input value (out of allowable range)
|
|
// 03: interface error
|
|
// 04: resend command received from mouse controller,
|
|
// device driver should attempt command again
|
|
// 05: cannot enable mouse, since no far call has been installed
|
|
// 80/86: mouse service not implemented
|
|
|
|
switch (regs.u.r8.al) {
|
|
case 0: // Disable/Enable Mouse
|
|
BX_DEBUG_INT15("case 0:\n");
|
|
switch (regs.u.r8.bh) {
|
|
case 0: // Disable Mouse
|
|
BX_DEBUG_INT15("case 0: disable mouse\n");
|
|
inhibit_mouse_int_and_events(); // disable IRQ12 and packets
|
|
ret = send_to_mouse_ctrl(0xF5); // disable mouse command
|
|
if (ret == 0) {
|
|
ret = get_mouse_data(&mouse_data1);
|
|
if ( (ret == 0) || (mouse_data1 == 0xFA) ) {
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
return;
|
|
}
|
|
}
|
|
|
|
// error
|
|
SET_CF();
|
|
regs.u.r8.ah = ret;
|
|
return;
|
|
break;
|
|
|
|
case 1: // Enable Mouse
|
|
BX_DEBUG_INT15("case 1: enable mouse\n");
|
|
mouse_flags_2 = read_byte(ebda_seg, 0x0027);
|
|
if ( (mouse_flags_2 & 0x80) == 0 ) {
|
|
BX_DEBUG_INT15("INT 15h C2 Enable Mouse, no far call handler\n");
|
|
SET_CF(); // error
|
|
regs.u.r8.ah = 5; // no far call installed
|
|
return;
|
|
}
|
|
inhibit_mouse_int_and_events(); // disable IRQ12 and packets
|
|
ret = send_to_mouse_ctrl(0xF4); // enable mouse command
|
|
if (ret == 0) {
|
|
ret = get_mouse_data(&mouse_data1);
|
|
if ( (ret == 0) && (mouse_data1 == 0xFA) ) {
|
|
enable_mouse_int_and_events(); // turn IRQ12 and packet generation on
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
return;
|
|
}
|
|
}
|
|
SET_CF();
|
|
regs.u.r8.ah = ret;
|
|
return;
|
|
|
|
default: // invalid subfunction
|
|
BX_DEBUG_INT15("INT 15h C2 AL=0, BH=%02x\n", (unsigned) regs.u.r8.bh);
|
|
SET_CF(); // error
|
|
regs.u.r8.ah = 1; // invalid subfunction
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case 1: // Reset Mouse
|
|
case 5: // Initialize Mouse
|
|
BX_DEBUG_INT15("case 1 or 5:\n");
|
|
if (regs.u.r8.al == 5) {
|
|
if (regs.u.r8.bh != 3) {
|
|
SET_CF();
|
|
regs.u.r8.ah = 0x02; // invalid input
|
|
return;
|
|
}
|
|
mouse_flags_2 = read_byte(ebda_seg, 0x0027);
|
|
mouse_flags_2 = (mouse_flags_2 & 0x00) | regs.u.r8.bh;
|
|
mouse_flags_1 = 0x00;
|
|
write_byte(ebda_seg, 0x0026, mouse_flags_1);
|
|
write_byte(ebda_seg, 0x0027, mouse_flags_2);
|
|
}
|
|
|
|
inhibit_mouse_int_and_events(); // disable IRQ12 and packets
|
|
ret = send_to_mouse_ctrl(0xFF); // reset mouse command
|
|
if (ret == 0) {
|
|
ret = get_mouse_data(&mouse_data3);
|
|
// if no mouse attached, it will return RESEND
|
|
if (mouse_data3 == 0xfe) {
|
|
SET_CF();
|
|
return;
|
|
}
|
|
if (mouse_data3 != 0xfa)
|
|
BX_PANIC("Mouse reset returned %02x (should be ack)\n", (unsigned)mouse_data3);
|
|
if ( ret == 0 ) {
|
|
ret = get_mouse_data(&mouse_data1);
|
|
if ( ret == 0 ) {
|
|
ret = get_mouse_data(&mouse_data2);
|
|
if ( ret == 0 ) {
|
|
// turn IRQ12 and packet generation on
|
|
enable_mouse_int_and_events();
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
regs.u.r8.bl = mouse_data1;
|
|
regs.u.r8.bh = mouse_data2;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// error
|
|
SET_CF();
|
|
regs.u.r8.ah = ret;
|
|
return;
|
|
|
|
case 2: // Set Sample Rate
|
|
BX_DEBUG_INT15("case 2:\n");
|
|
switch (regs.u.r8.bh) {
|
|
case 0: mouse_data1 = 10; break; // 10 reports/sec
|
|
case 1: mouse_data1 = 20; break; // 20 reports/sec
|
|
case 2: mouse_data1 = 40; break; // 40 reports/sec
|
|
case 3: mouse_data1 = 60; break; // 60 reports/sec
|
|
case 4: mouse_data1 = 80; break; // 80 reports/sec
|
|
case 5: mouse_data1 = 100; break; // 100 reports/sec (default)
|
|
case 6: mouse_data1 = 200; break; // 200 reports/sec
|
|
default: mouse_data1 = 0;
|
|
}
|
|
if (mouse_data1 > 0) {
|
|
ret = send_to_mouse_ctrl(0xF3); // set sample rate command
|
|
if (ret == 0) {
|
|
ret = get_mouse_data(&mouse_data2);
|
|
ret = send_to_mouse_ctrl(mouse_data1);
|
|
ret = get_mouse_data(&mouse_data2);
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
} else {
|
|
// error
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
}
|
|
} else {
|
|
// error
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
}
|
|
break;
|
|
|
|
case 3: // Set Resolution
|
|
BX_DEBUG_INT15("case 3:\n");
|
|
// BX:
|
|
// 0 = 25 dpi, 1 count per millimeter
|
|
// 1 = 50 dpi, 2 counts per millimeter
|
|
// 2 = 100 dpi, 4 counts per millimeter
|
|
// 3 = 200 dpi, 8 counts per millimeter
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
break;
|
|
|
|
case 4: // Get Device ID
|
|
BX_DEBUG_INT15("case 4:\n");
|
|
inhibit_mouse_int_and_events(); // disable IRQ12 and packets
|
|
ret = send_to_mouse_ctrl(0xF2); // get mouse ID command
|
|
if (ret == 0) {
|
|
ret = get_mouse_data(&mouse_data1);
|
|
ret = get_mouse_data(&mouse_data2);
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
regs.u.r8.bh = mouse_data2;
|
|
} else {
|
|
// error
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
}
|
|
break;
|
|
|
|
case 6: // Return Status & Set Scaling Factor...
|
|
BX_DEBUG_INT15("case 6:\n");
|
|
switch (regs.u.r8.bh) {
|
|
case 0: // Return Status
|
|
comm_byte = inhibit_mouse_int_and_events(); // disable IRQ12 and packets
|
|
ret = send_to_mouse_ctrl(0xE9); // get mouse info command
|
|
if (ret == 0) {
|
|
ret = get_mouse_data(&mouse_data1);
|
|
if (mouse_data1 != 0xfa)
|
|
BX_PANIC("Mouse status returned %02x (should be ack)\n", (unsigned)mouse_data1);
|
|
if (ret == 0) {
|
|
ret = get_mouse_data(&mouse_data1);
|
|
if ( ret == 0 ) {
|
|
ret = get_mouse_data(&mouse_data2);
|
|
if ( ret == 0 ) {
|
|
ret = get_mouse_data(&mouse_data3);
|
|
if ( ret == 0 ) {
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
regs.u.r8.bl = mouse_data1;
|
|
regs.u.r8.cl = mouse_data2;
|
|
regs.u.r8.dl = mouse_data3;
|
|
set_kbd_command_byte(comm_byte); // restore IRQ12 and serial enable
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// error
|
|
SET_CF();
|
|
regs.u.r8.ah = ret;
|
|
set_kbd_command_byte(comm_byte); // restore IRQ12 and serial enable
|
|
return;
|
|
|
|
case 1: // Set Scaling Factor to 1:1
|
|
case 2: // Set Scaling Factor to 2:1
|
|
comm_byte = inhibit_mouse_int_and_events(); // disable IRQ12 and packets
|
|
if (regs.u.r8.bh == 1) {
|
|
ret = send_to_mouse_ctrl(0xE6);
|
|
} else {
|
|
ret = send_to_mouse_ctrl(0xE7);
|
|
}
|
|
if (ret == 0) {
|
|
get_mouse_data(&mouse_data1);
|
|
ret = (mouse_data1 != 0xFA);
|
|
}
|
|
if (ret == 0) {
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
} else {
|
|
// error
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
}
|
|
set_kbd_command_byte(comm_byte); // restore IRQ12 and serial enable
|
|
break;
|
|
|
|
default:
|
|
BX_PANIC("INT 15h C2 AL=6, BH=%02x\n", (unsigned) regs.u.r8.bh);
|
|
}
|
|
break;
|
|
|
|
case 7: // Set Mouse Handler Address
|
|
BX_DEBUG_INT15("case 7:\n");
|
|
mouse_driver_seg = ES;
|
|
mouse_driver_offset = regs.u.r16.bx;
|
|
write_word(ebda_seg, 0x0022, mouse_driver_offset);
|
|
write_word(ebda_seg, 0x0024, mouse_driver_seg);
|
|
mouse_flags_2 = read_byte(ebda_seg, 0x0027);
|
|
if (mouse_driver_offset == 0 && mouse_driver_seg == 0) {
|
|
/* remove handler */
|
|
if ( (mouse_flags_2 & 0x80) != 0 ) {
|
|
mouse_flags_2 &= ~0x80;
|
|
inhibit_mouse_int_and_events(); // disable IRQ12 and packets
|
|
}
|
|
}
|
|
else {
|
|
/* install handler */
|
|
mouse_flags_2 |= 0x80;
|
|
}
|
|
write_byte(ebda_seg, 0x0027, mouse_flags_2);
|
|
CLEAR_CF();
|
|
regs.u.r8.ah = 0;
|
|
break;
|
|
|
|
default:
|
|
BX_DEBUG_INT15("case default:\n");
|
|
regs.u.r8.ah = 1; // invalid function
|
|
SET_CF();
|
|
}
|
|
break;
|
|
|
|
default:
|
|
BX_INFO("*** int 15h function AX=%04x, BX=%04x not yet supported!\n",
|
|
(unsigned) regs.u.r16.ax, (unsigned) regs.u.r16.bx);
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
void set_e820_range(ES, DI, start, end, type)
|
|
Bit16u ES;
|
|
Bit16u DI;
|
|
Bit32u start;
|
|
Bit32u end;
|
|
Bit16u type;
|
|
{
|
|
write_word(ES, DI, start);
|
|
write_word(ES, DI+2, start >> 16);
|
|
write_word(ES, DI+4, 0x00);
|
|
write_word(ES, DI+6, 0x00);
|
|
|
|
end -= start;
|
|
write_word(ES, DI+8, end);
|
|
write_word(ES, DI+10, end >> 16);
|
|
write_word(ES, DI+12, 0x0000);
|
|
write_word(ES, DI+14, 0x0000);
|
|
|
|
write_word(ES, DI+16, type);
|
|
write_word(ES, DI+18, 0x0);
|
|
}
|
|
|
|
void
|
|
int15_function32(regs, ES, DS, FLAGS)
|
|
pushad_regs_t regs; // REGS pushed via pushad
|
|
Bit16u ES, DS, FLAGS;
|
|
{
|
|
Bit32u extended_memory_size=0; // 64bits long
|
|
Bit16u CX,DX;
|
|
|
|
BX_DEBUG_INT15("int15 AX=%04x\n",regs.u.r16.ax);
|
|
|
|
switch (regs.u.r8.ah) {
|
|
case 0x86:
|
|
// Wait for CX:DX microseconds. currently using the
|
|
// refresh request port 0x61 bit4, toggling every 15usec
|
|
|
|
CX = regs.u.r16.cx;
|
|
DX = regs.u.r16.dx;
|
|
|
|
ASM_START
|
|
sti
|
|
|
|
;; Get the count in eax
|
|
mov bx, sp
|
|
SEG SS
|
|
mov ax, _int15_function.CX [bx]
|
|
shl eax, #16
|
|
SEG SS
|
|
mov ax, _int15_function.DX [bx]
|
|
|
|
;; convert to numbers of 15usec ticks
|
|
mov ebx, #15
|
|
xor edx, edx
|
|
div eax, ebx
|
|
mov ecx, eax
|
|
|
|
;; wait for ecx number of refresh requests
|
|
in al, #0x61
|
|
and al,#0x10
|
|
mov ah, al
|
|
|
|
or ecx, ecx
|
|
je int1586_tick_end
|
|
int1586_tick:
|
|
in al, #0x61
|
|
and al,#0x10
|
|
cmp al, ah
|
|
je int1586_tick
|
|
mov ah, al
|
|
dec ecx
|
|
jnz int1586_tick
|
|
int1586_tick_end:
|
|
ASM_END
|
|
|
|
break;
|
|
|
|
case 0xe8:
|
|
switch(regs.u.r8.al)
|
|
{
|
|
case 0x20: // coded by osmaker aka K.J.
|
|
if(regs.u.r32.edx == 0x534D4150)
|
|
{
|
|
extended_memory_size = inb_cmos(0x35);
|
|
extended_memory_size <<= 8;
|
|
extended_memory_size |= inb_cmos(0x34);
|
|
extended_memory_size *= 64;
|
|
// greater than EFF00000???
|
|
if(extended_memory_size > 0x3bc000) {
|
|
extended_memory_size = 0x3bc000; // everything after this is reserved memory until we get to 0x100000000
|
|
}
|
|
extended_memory_size *= 1024;
|
|
extended_memory_size += (16L * 1024 * 1024);
|
|
|
|
if(extended_memory_size <= (16L * 1024 * 1024)) {
|
|
extended_memory_size = inb_cmos(0x31);
|
|
extended_memory_size <<= 8;
|
|
extended_memory_size |= inb_cmos(0x30);
|
|
extended_memory_size *= 1024;
|
|
}
|
|
|
|
switch(regs.u.r16.bx)
|
|
{
|
|
case 0:
|
|
set_e820_range(ES, regs.u.r16.di,
|
|
0x0000000L, 0x0009fc00L, 1);
|
|
regs.u.r32.ebx = 1;
|
|
regs.u.r32.eax = 0x534D4150;
|
|
regs.u.r32.ecx = 0x14;
|
|
CLEAR_CF();
|
|
return;
|
|
break;
|
|
case 1:
|
|
set_e820_range(ES, regs.u.r16.di,
|
|
0x0009fc00L, 0x000a0000L, 2);
|
|
regs.u.r32.ebx = 2;
|
|
regs.u.r32.eax = 0x534D4150;
|
|
regs.u.r32.ecx = 0x14;
|
|
CLEAR_CF();
|
|
return;
|
|
break;
|
|
case 2:
|
|
set_e820_range(ES, regs.u.r16.di,
|
|
0x000e8000L, 0x00100000L, 2);
|
|
regs.u.r32.ebx = 3;
|
|
regs.u.r32.eax = 0x534D4150;
|
|
regs.u.r32.ecx = 0x14;
|
|
CLEAR_CF();
|
|
return;
|
|
break;
|
|
case 3:
|
|
set_e820_range(ES, regs.u.r16.di,
|
|
0x00100000L,
|
|
extended_memory_size - ACPI_DATA_SIZE, 1);
|
|
regs.u.r32.ebx = 4;
|
|
regs.u.r32.eax = 0x534D4150;
|
|
regs.u.r32.ecx = 0x14;
|
|
CLEAR_CF();
|
|
return;
|
|
break;
|
|
case 4:
|
|
set_e820_range(ES, regs.u.r16.di,
|
|
extended_memory_size - ACPI_DATA_SIZE,
|
|
extended_memory_size, 3); // ACPI RAM
|
|
regs.u.r32.ebx = 5;
|
|
regs.u.r32.eax = 0x534D4150;
|
|
regs.u.r32.ecx = 0x14;
|
|
CLEAR_CF();
|
|
return;
|
|
break;
|
|
case 5:
|
|
/* 256KB BIOS area at the end of 4 GB */
|
|
set_e820_range(ES, regs.u.r16.di,
|
|
0xfffc0000L, 0x00000000L, 2);
|
|
regs.u.r32.ebx = 0;
|
|
regs.u.r32.eax = 0x534D4150;
|
|
regs.u.r32.ecx = 0x14;
|
|
CLEAR_CF();
|
|
return;
|
|
default: /* AX=E820, DX=534D4150, BX unrecognized */
|
|
goto int15_unimplemented;
|
|
break;
|
|
}
|
|
} else {
|
|
// if DX != 0x534D4150)
|
|
goto int15_unimplemented;
|
|
}
|
|
break;
|
|
|
|
case 0x01:
|
|
// do we have any reason to fail here ?
|
|
CLEAR_CF();
|
|
|
|
// my real system sets ax and bx to 0
|
|
// this is confirmed by Ralph Brown list
|
|
// but syslinux v1.48 is known to behave
|
|
// strangely if ax is set to 0
|
|
// regs.u.r16.ax = 0;
|
|
// regs.u.r16.bx = 0;
|
|
|
|
// Get the amount of extended memory (above 1M)
|
|
regs.u.r8.cl = inb_cmos(0x30);
|
|
regs.u.r8.ch = inb_cmos(0x31);
|
|
|
|
// limit to 15M
|
|
if(regs.u.r16.cx > 0x3c00)
|
|
{
|
|
regs.u.r16.cx = 0x3c00;
|
|
}
|
|
|
|
// Get the amount of extended memory above 16M in 64k blocs
|
|
regs.u.r8.dl = inb_cmos(0x34);
|
|
regs.u.r8.dh = inb_cmos(0x35);
|
|
|
|
// Set configured memory equal to extended memory
|
|
regs.u.r16.ax = regs.u.r16.cx;
|
|
regs.u.r16.bx = regs.u.r16.dx;
|
|
break;
|
|
default: /* AH=0xE8?? but not implemented */
|
|
goto int15_unimplemented;
|
|
}
|
|
break;
|
|
int15_unimplemented:
|
|
// fall into the default
|
|
default:
|
|
BX_INFO("*** int 15h function AX=%04x, BX=%04x not yet supported!\n",
|
|
(unsigned) regs.u.r16.ax, (unsigned) regs.u.r16.bx);
|
|
SET_CF();
|
|
regs.u.r8.ah = UNSUPPORTED_FUNCTION;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void
|
|
int16_function(DI, SI, BP, SP, BX, DX, CX, AX, FLAGS)
|
|
Bit16u DI, SI, BP, SP, BX, DX, CX, AX, FLAGS;
|
|
{
|
|
Bit8u scan_code, ascii_code, shift_flags, led_flags, count;
|
|
Bit16u kbd_code, max;
|
|
|
|
BX_DEBUG_INT16("int16: AX=%04x BX=%04x CX=%04x DX=%04x \n", AX, BX, CX, DX);
|
|
|
|
shift_flags = read_byte(0x0040, 0x17);
|
|
led_flags = read_byte(0x0040, 0x97);
|
|
if ((((shift_flags >> 4) & 0x07) ^ (led_flags & 0x07)) != 0) {
|
|
ASM_START
|
|
cli
|
|
ASM_END
|
|
outb(0x60, 0xed);
|
|
while ((inb(0x64) & 0x01) == 0) outb(0x80, 0x21);
|
|
if ((inb(0x60) == 0xfa)) {
|
|
led_flags &= 0xf8;
|
|
led_flags |= ((shift_flags >> 4) & 0x07);
|
|
outb(0x60, led_flags & 0x07);
|
|
while ((inb(0x64) & 0x01) == 0) outb(0x80, 0x21);
|
|
inb(0x60);
|
|
write_byte(0x0040, 0x97, led_flags);
|
|
}
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
}
|
|
|
|
switch (GET_AH()) {
|
|
case 0x00: /* read keyboard input */
|
|
|
|
if ( !dequeue_key(&scan_code, &ascii_code, 1) ) {
|
|
BX_PANIC("KBD: int16h: out of keyboard input\n");
|
|
}
|
|
if (scan_code !=0 && ascii_code == 0xF0) ascii_code = 0;
|
|
else if (ascii_code == 0xE0) ascii_code = 0;
|
|
AX = (scan_code << 8) | ascii_code;
|
|
break;
|
|
|
|
case 0x01: /* check keyboard status */
|
|
if ( !dequeue_key(&scan_code, &ascii_code, 0) ) {
|
|
SET_ZF();
|
|
return;
|
|
}
|
|
if (scan_code !=0 && ascii_code == 0xF0) ascii_code = 0;
|
|
else if (ascii_code == 0xE0) ascii_code = 0;
|
|
AX = (scan_code << 8) | ascii_code;
|
|
CLEAR_ZF();
|
|
break;
|
|
|
|
case 0x02: /* get shift flag status */
|
|
shift_flags = read_byte(0x0040, 0x17);
|
|
SET_AL(shift_flags);
|
|
break;
|
|
|
|
case 0x05: /* store key-stroke into buffer */
|
|
if ( !enqueue_key(GET_CH(), GET_CL()) ) {
|
|
SET_AL(1);
|
|
}
|
|
else {
|
|
SET_AL(0);
|
|
}
|
|
break;
|
|
|
|
case 0x09: /* GET KEYBOARD FUNCTIONALITY */
|
|
// bit Bochs Description
|
|
// 7 0 reserved
|
|
// 6 0 INT 16/AH=20h-22h supported (122-key keyboard support)
|
|
// 5 1 INT 16/AH=10h-12h supported (enhanced keyboard support)
|
|
// 4 1 INT 16/AH=0Ah supported
|
|
// 3 0 INT 16/AX=0306h supported
|
|
// 2 0 INT 16/AX=0305h supported
|
|
// 1 0 INT 16/AX=0304h supported
|
|
// 0 0 INT 16/AX=0300h supported
|
|
//
|
|
SET_AL(0x30);
|
|
break;
|
|
|
|
case 0x0A: /* GET KEYBOARD ID */
|
|
count = 2;
|
|
kbd_code = 0x0;
|
|
outb(0x60, 0xf2);
|
|
/* Wait for data */
|
|
max=0xffff;
|
|
while ( ((inb(0x64) & 0x01) == 0) && (--max>0) ) outb(0x80, 0x00);
|
|
if (max>0x0) {
|
|
if ((inb(0x60) == 0xfa)) {
|
|
do {
|
|
max=0xffff;
|
|
while ( ((inb(0x64) & 0x01) == 0) && (--max>0) ) outb(0x80, 0x00);
|
|
if (max>0x0) {
|
|
kbd_code >>= 8;
|
|
kbd_code |= (inb(0x60) << 8);
|
|
}
|
|
} while (--count>0);
|
|
}
|
|
}
|
|
BX=kbd_code;
|
|
break;
|
|
|
|
case 0x10: /* read MF-II keyboard input */
|
|
|
|
if ( !dequeue_key(&scan_code, &ascii_code, 1) ) {
|
|
BX_PANIC("KBD: int16h: out of keyboard input\n");
|
|
}
|
|
if (scan_code !=0 && ascii_code == 0xF0) ascii_code = 0;
|
|
AX = (scan_code << 8) | ascii_code;
|
|
break;
|
|
|
|
case 0x11: /* check MF-II keyboard status */
|
|
if ( !dequeue_key(&scan_code, &ascii_code, 0) ) {
|
|
SET_ZF();
|
|
return;
|
|
}
|
|
if (scan_code !=0 && ascii_code == 0xF0) ascii_code = 0;
|
|
AX = (scan_code << 8) | ascii_code;
|
|
CLEAR_ZF();
|
|
break;
|
|
|
|
case 0x12: /* get extended keyboard status */
|
|
shift_flags = read_byte(0x0040, 0x17);
|
|
SET_AL(shift_flags);
|
|
shift_flags = read_byte(0x0040, 0x18) & 0x73;
|
|
shift_flags |= read_byte(0x0040, 0x96) & 0x0c;
|
|
SET_AH(shift_flags);
|
|
BX_DEBUG_INT16("int16: func 12 sending %04x\n",AX);
|
|
break;
|
|
|
|
case 0x92: /* keyboard capability check called by DOS 5.0+ keyb */
|
|
SET_AH(0x80); // function int16 ah=0x10-0x12 supported
|
|
break;
|
|
|
|
case 0xA2: /* 122 keys capability check called by DOS 5.0+ keyb */
|
|
// don't change AH : function int16 ah=0x20-0x22 NOT supported
|
|
break;
|
|
|
|
case 0x6F:
|
|
if (GET_AL() == 0x08)
|
|
SET_AH(0x02); // unsupported, aka normal keyboard
|
|
|
|
default:
|
|
BX_INFO("KBD: unsupported int 16h function %02x\n", GET_AH());
|
|
}
|
|
}
|
|
|
|
unsigned int
|
|
dequeue_key(scan_code, ascii_code, incr)
|
|
Bit8u *scan_code;
|
|
Bit8u *ascii_code;
|
|
unsigned int incr;
|
|
{
|
|
Bit16u buffer_start, buffer_end, buffer_head, buffer_tail;
|
|
Bit16u ss;
|
|
Bit8u acode, scode;
|
|
|
|
#if BX_CPU < 2
|
|
buffer_start = 0x001E;
|
|
buffer_end = 0x003E;
|
|
#else
|
|
buffer_start = read_word(0x0040, 0x0080);
|
|
buffer_end = read_word(0x0040, 0x0082);
|
|
#endif
|
|
|
|
buffer_head = read_word(0x0040, 0x001a);
|
|
buffer_tail = read_word(0x0040, 0x001c);
|
|
|
|
if (buffer_head != buffer_tail) {
|
|
ss = get_SS();
|
|
acode = read_byte(0x0040, buffer_head);
|
|
scode = read_byte(0x0040, buffer_head+1);
|
|
write_byte(ss, ascii_code, acode);
|
|
write_byte(ss, scan_code, scode);
|
|
|
|
if (incr) {
|
|
buffer_head += 2;
|
|
if (buffer_head >= buffer_end)
|
|
buffer_head = buffer_start;
|
|
write_word(0x0040, 0x001a, buffer_head);
|
|
}
|
|
return(1);
|
|
}
|
|
else {
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
static char panic_msg_keyb_buffer_full[] = "%s: keyboard input buffer full\n";
|
|
|
|
Bit8u
|
|
inhibit_mouse_int_and_events()
|
|
{
|
|
Bit8u command_byte, prev_command_byte;
|
|
|
|
// Turn off IRQ generation and aux data line
|
|
if ( inb(0x64) & 0x02 )
|
|
BX_PANIC(panic_msg_keyb_buffer_full,"inhibmouse");
|
|
outb(0x64, 0x20); // get command byte
|
|
while ( (inb(0x64) & 0x01) != 0x01 );
|
|
prev_command_byte = inb(0x60);
|
|
command_byte = prev_command_byte;
|
|
//while ( (inb(0x64) & 0x02) );
|
|
if ( inb(0x64) & 0x02 )
|
|
BX_PANIC(panic_msg_keyb_buffer_full,"inhibmouse");
|
|
command_byte &= 0xfd; // turn off IRQ 12 generation
|
|
command_byte |= 0x20; // disable mouse serial clock line
|
|
outb(0x64, 0x60); // write command byte
|
|
outb(0x60, command_byte);
|
|
return(prev_command_byte);
|
|
}
|
|
|
|
void
|
|
enable_mouse_int_and_events()
|
|
{
|
|
Bit8u command_byte;
|
|
|
|
// Turn on IRQ generation and aux data line
|
|
if ( inb(0x64) & 0x02 )
|
|
BX_PANIC(panic_msg_keyb_buffer_full,"enabmouse");
|
|
outb(0x64, 0x20); // get command byte
|
|
while ( (inb(0x64) & 0x01) != 0x01 );
|
|
command_byte = inb(0x60);
|
|
//while ( (inb(0x64) & 0x02) );
|
|
if ( inb(0x64) & 0x02 )
|
|
BX_PANIC(panic_msg_keyb_buffer_full,"enabmouse");
|
|
command_byte |= 0x02; // turn on IRQ 12 generation
|
|
command_byte &= 0xdf; // enable mouse serial clock line
|
|
outb(0x64, 0x60); // write command byte
|
|
outb(0x60, command_byte);
|
|
}
|
|
|
|
Bit8u
|
|
send_to_mouse_ctrl(sendbyte)
|
|
Bit8u sendbyte;
|
|
{
|
|
Bit8u response;
|
|
|
|
// wait for chance to write to ctrl
|
|
if ( inb(0x64) & 0x02 )
|
|
BX_PANIC(panic_msg_keyb_buffer_full,"sendmouse");
|
|
outb(0x64, 0xD4);
|
|
outb(0x60, sendbyte);
|
|
return(0);
|
|
}
|
|
|
|
|
|
Bit8u
|
|
get_mouse_data(data)
|
|
Bit8u *data;
|
|
{
|
|
Bit8u response;
|
|
Bit16u ss;
|
|
|
|
while ( (inb(0x64) & 0x21) != 0x21 ) {
|
|
}
|
|
|
|
response = inb(0x60);
|
|
|
|
ss = get_SS();
|
|
write_byte(ss, data, response);
|
|
return(0);
|
|
}
|
|
|
|
void
|
|
set_kbd_command_byte(command_byte)
|
|
Bit8u command_byte;
|
|
{
|
|
if ( inb(0x64) & 0x02 )
|
|
BX_PANIC(panic_msg_keyb_buffer_full,"setkbdcomm");
|
|
outb(0x64, 0xD4);
|
|
|
|
outb(0x64, 0x60); // write command byte
|
|
outb(0x60, command_byte);
|
|
}
|
|
|
|
void
|
|
int09_function(DI, SI, BP, SP, BX, DX, CX, AX)
|
|
Bit16u DI, SI, BP, SP, BX, DX, CX, AX;
|
|
{
|
|
Bit8u scancode, asciicode, shift_flags;
|
|
Bit8u mf2_flags, mf2_state;
|
|
|
|
//
|
|
// DS has been set to F000 before call
|
|
//
|
|
|
|
|
|
scancode = GET_AL();
|
|
|
|
if (scancode == 0) {
|
|
BX_INFO("KBD: int09 handler: AL=0\n");
|
|
return;
|
|
}
|
|
|
|
|
|
shift_flags = read_byte(0x0040, 0x17);
|
|
mf2_flags = read_byte(0x0040, 0x18);
|
|
mf2_state = read_byte(0x0040, 0x96);
|
|
asciicode = 0;
|
|
|
|
switch (scancode) {
|
|
case 0x3a: /* Caps Lock press */
|
|
shift_flags ^= 0x40;
|
|
write_byte(0x0040, 0x17, shift_flags);
|
|
mf2_flags |= 0x40;
|
|
write_byte(0x0040, 0x18, mf2_flags);
|
|
break;
|
|
case 0xba: /* Caps Lock release */
|
|
mf2_flags &= ~0x40;
|
|
write_byte(0x0040, 0x18, mf2_flags);
|
|
break;
|
|
|
|
case 0x2a: /* L Shift press */
|
|
shift_flags |= 0x02;
|
|
write_byte(0x0040, 0x17, shift_flags);
|
|
break;
|
|
case 0xaa: /* L Shift release */
|
|
shift_flags &= ~0x02;
|
|
write_byte(0x0040, 0x17, shift_flags);
|
|
break;
|
|
|
|
case 0x36: /* R Shift press */
|
|
shift_flags |= 0x01;
|
|
write_byte(0x0040, 0x17, shift_flags);
|
|
break;
|
|
case 0xb6: /* R Shift release */
|
|
shift_flags &= ~0x01;
|
|
write_byte(0x0040, 0x17, shift_flags);
|
|
break;
|
|
|
|
case 0x1d: /* Ctrl press */
|
|
if ((mf2_state & 0x01) == 0) {
|
|
shift_flags |= 0x04;
|
|
write_byte(0x0040, 0x17, shift_flags);
|
|
if (mf2_state & 0x02) {
|
|
mf2_state |= 0x04;
|
|
write_byte(0x0040, 0x96, mf2_state);
|
|
} else {
|
|
mf2_flags |= 0x01;
|
|
write_byte(0x0040, 0x18, mf2_flags);
|
|
}
|
|
}
|
|
break;
|
|
case 0x9d: /* Ctrl release */
|
|
if ((mf2_state & 0x01) == 0) {
|
|
shift_flags &= ~0x04;
|
|
write_byte(0x0040, 0x17, shift_flags);
|
|
if (mf2_state & 0x02) {
|
|
mf2_state &= ~0x04;
|
|
write_byte(0x0040, 0x96, mf2_state);
|
|
} else {
|
|
mf2_flags &= ~0x01;
|
|
write_byte(0x0040, 0x18, mf2_flags);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 0x38: /* Alt press */
|
|
shift_flags |= 0x08;
|
|
write_byte(0x0040, 0x17, shift_flags);
|
|
if (mf2_state & 0x02) {
|
|
mf2_state |= 0x08;
|
|
write_byte(0x0040, 0x96, mf2_state);
|
|
} else {
|
|
mf2_flags |= 0x02;
|
|
write_byte(0x0040, 0x18, mf2_flags);
|
|
}
|
|
break;
|
|
case 0xb8: /* Alt release */
|
|
shift_flags &= ~0x08;
|
|
write_byte(0x0040, 0x17, shift_flags);
|
|
if (mf2_state & 0x02) {
|
|
mf2_state &= ~0x08;
|
|
write_byte(0x0040, 0x96, mf2_state);
|
|
} else {
|
|
mf2_flags &= ~0x02;
|
|
write_byte(0x0040, 0x18, mf2_flags);
|
|
}
|
|
break;
|
|
|
|
case 0x45: /* Num Lock press */
|
|
if ((mf2_state & 0x03) == 0) {
|
|
mf2_flags |= 0x20;
|
|
write_byte(0x0040, 0x18, mf2_flags);
|
|
shift_flags ^= 0x20;
|
|
write_byte(0x0040, 0x17, shift_flags);
|
|
}
|
|
break;
|
|
case 0xc5: /* Num Lock release */
|
|
if ((mf2_state & 0x03) == 0) {
|
|
mf2_flags &= ~0x20;
|
|
write_byte(0x0040, 0x18, mf2_flags);
|
|
}
|
|
break;
|
|
|
|
case 0x46: /* Scroll Lock press */
|
|
mf2_flags |= 0x10;
|
|
write_byte(0x0040, 0x18, mf2_flags);
|
|
shift_flags ^= 0x10;
|
|
write_byte(0x0040, 0x17, shift_flags);
|
|
break;
|
|
|
|
case 0xc6: /* Scroll Lock release */
|
|
mf2_flags &= ~0x10;
|
|
write_byte(0x0040, 0x18, mf2_flags);
|
|
break;
|
|
|
|
default:
|
|
if (scancode & 0x80) {
|
|
break; /* toss key releases ... */
|
|
}
|
|
if (scancode > MAX_SCAN_CODE) {
|
|
BX_INFO("KBD: int09h_handler(): unknown scancode read: 0x%02x!\n", scancode);
|
|
return;
|
|
}
|
|
if (shift_flags & 0x08) { /* ALT */
|
|
asciicode = scan_to_scanascii[scancode].alt;
|
|
scancode = scan_to_scanascii[scancode].alt >> 8;
|
|
} else if (shift_flags & 0x04) { /* CONTROL */
|
|
asciicode = scan_to_scanascii[scancode].control;
|
|
scancode = scan_to_scanascii[scancode].control >> 8;
|
|
} else if (((mf2_state & 0x02) > 0) && ((scancode >= 0x47) && (scancode <= 0x53))) {
|
|
/* extended keys handling */
|
|
asciicode = 0xe0;
|
|
scancode = scan_to_scanascii[scancode].normal >> 8;
|
|
} else if (shift_flags & 0x03) { /* LSHIFT + RSHIFT */
|
|
/* check if lock state should be ignored
|
|
* because a SHIFT key are pressed */
|
|
|
|
if (shift_flags & scan_to_scanascii[scancode].lock_flags) {
|
|
asciicode = scan_to_scanascii[scancode].normal;
|
|
scancode = scan_to_scanascii[scancode].normal >> 8;
|
|
} else {
|
|
asciicode = scan_to_scanascii[scancode].shift;
|
|
scancode = scan_to_scanascii[scancode].shift >> 8;
|
|
}
|
|
} else {
|
|
/* check if lock is on */
|
|
if (shift_flags & scan_to_scanascii[scancode].lock_flags) {
|
|
asciicode = scan_to_scanascii[scancode].shift;
|
|
scancode = scan_to_scanascii[scancode].shift >> 8;
|
|
} else {
|
|
asciicode = scan_to_scanascii[scancode].normal;
|
|
scancode = scan_to_scanascii[scancode].normal >> 8;
|
|
}
|
|
}
|
|
if (scancode==0 && asciicode==0) {
|
|
BX_INFO("KBD: int09h_handler(): scancode & asciicode are zero?\n");
|
|
}
|
|
enqueue_key(scancode, asciicode);
|
|
break;
|
|
}
|
|
if ((scancode & 0x7f) != 0x1d) {
|
|
mf2_state &= ~0x01;
|
|
}
|
|
mf2_state &= ~0x02;
|
|
write_byte(0x0040, 0x96, mf2_state);
|
|
}
|
|
|
|
unsigned int
|
|
enqueue_key(scan_code, ascii_code)
|
|
Bit8u scan_code, ascii_code;
|
|
{
|
|
Bit16u buffer_start, buffer_end, buffer_head, buffer_tail, temp_tail;
|
|
|
|
#if BX_CPU < 2
|
|
buffer_start = 0x001E;
|
|
buffer_end = 0x003E;
|
|
#else
|
|
buffer_start = read_word(0x0040, 0x0080);
|
|
buffer_end = read_word(0x0040, 0x0082);
|
|
#endif
|
|
|
|
buffer_head = read_word(0x0040, 0x001A);
|
|
buffer_tail = read_word(0x0040, 0x001C);
|
|
|
|
temp_tail = buffer_tail;
|
|
buffer_tail += 2;
|
|
if (buffer_tail >= buffer_end)
|
|
buffer_tail = buffer_start;
|
|
|
|
if (buffer_tail == buffer_head) {
|
|
return(0);
|
|
}
|
|
|
|
write_byte(0x0040, temp_tail, ascii_code);
|
|
write_byte(0x0040, temp_tail+1, scan_code);
|
|
write_word(0x0040, 0x001C, buffer_tail);
|
|
return(1);
|
|
}
|
|
|
|
|
|
void
|
|
int74_function(make_farcall, Z, Y, X, status)
|
|
Bit16u make_farcall, Z, Y, X, status;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit8u in_byte, index, package_count;
|
|
Bit8u mouse_flags_1, mouse_flags_2;
|
|
|
|
BX_DEBUG_INT74("entering int74_function\n");
|
|
make_farcall = 0;
|
|
|
|
in_byte = inb(0x64);
|
|
if ( (in_byte & 0x21) != 0x21 ) {
|
|
return;
|
|
}
|
|
in_byte = inb(0x60);
|
|
BX_DEBUG_INT74("int74: read byte %02x\n", in_byte);
|
|
|
|
mouse_flags_1 = read_byte(ebda_seg, 0x0026);
|
|
mouse_flags_2 = read_byte(ebda_seg, 0x0027);
|
|
|
|
if ( (mouse_flags_2 & 0x80) != 0x80 ) {
|
|
return;
|
|
}
|
|
|
|
package_count = mouse_flags_2 & 0x07;
|
|
index = mouse_flags_1 & 0x07;
|
|
write_byte(ebda_seg, 0x28 + index, in_byte);
|
|
|
|
if ( (index+1) >= package_count ) {
|
|
BX_DEBUG_INT74("int74_function: make_farcall=1\n");
|
|
status = read_byte(ebda_seg, 0x0028 + 0);
|
|
X = read_byte(ebda_seg, 0x0028 + 1);
|
|
Y = read_byte(ebda_seg, 0x0028 + 2);
|
|
Z = 0;
|
|
mouse_flags_1 = 0;
|
|
// check if far call handler installed
|
|
if (mouse_flags_2 & 0x80)
|
|
make_farcall = 1;
|
|
}
|
|
else {
|
|
mouse_flags_1++;
|
|
}
|
|
write_byte(ebda_seg, 0x0026, mouse_flags_1);
|
|
}
|
|
|
|
#define SET_DISK_RET_STATUS(status) write_byte(0x0040, 0x0074, status)
|
|
|
|
#if BX_USE_ATADRV
|
|
|
|
void
|
|
int13_harddisk(DS, ES, DI, SI, BP, ELDX, BX, DX, CX, AX, IP, CS, FLAGS)
|
|
Bit16u DS, ES, DI, SI, BP, ELDX, BX, DX, CX, AX, IP, CS, FLAGS;
|
|
{
|
|
Bit32u lba;
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit16u cylinder, head, sector;
|
|
Bit16u segment, offset;
|
|
Bit16u npc, nph, npspt, nlc, nlh, nlspt;
|
|
Bit16u size, count;
|
|
Bit8u device, status;
|
|
|
|
BX_DEBUG_INT13_HD("int13_harddisk: AX=%04x BX=%04x CX=%04x DX=%04x ES=%04x\n", AX, BX, CX, DX, ES);
|
|
|
|
write_byte(0x0040, 0x008e, 0); // clear completion flag
|
|
|
|
// basic check : device has to be defined
|
|
if ( (GET_ELDL() < 0x80) || (GET_ELDL() >= 0x80 + BX_MAX_ATA_DEVICES) ) {
|
|
BX_INFO("int13_harddisk: function %02x, ELDL out of range %02x\n", GET_AH(), GET_ELDL());
|
|
goto int13_fail;
|
|
}
|
|
|
|
// Get the ata channel
|
|
device=read_byte(ebda_seg,&EbdaData->ata.hdidmap[GET_ELDL()-0x80]);
|
|
|
|
// basic check : device has to be valid
|
|
if (device >= BX_MAX_ATA_DEVICES) {
|
|
BX_INFO("int13_harddisk: function %02x, unmapped device for ELDL=%02x\n", GET_AH(), GET_ELDL());
|
|
goto int13_fail;
|
|
}
|
|
|
|
switch (GET_AH()) {
|
|
|
|
case 0x00: /* disk controller reset */
|
|
ata_reset (device);
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x01: /* read disk status */
|
|
status = read_byte(0x0040, 0x0074);
|
|
SET_AH(status);
|
|
SET_DISK_RET_STATUS(0);
|
|
/* set CF if error status read */
|
|
if (status) goto int13_fail_nostatus;
|
|
else goto int13_success_noah;
|
|
break;
|
|
|
|
case 0x02: // read disk sectors
|
|
case 0x03: // write disk sectors
|
|
case 0x04: // verify disk sectors
|
|
|
|
count = GET_AL();
|
|
cylinder = GET_CH();
|
|
cylinder |= ( ((Bit16u) GET_CL()) << 2) & 0x300;
|
|
sector = (GET_CL() & 0x3f);
|
|
head = GET_DH();
|
|
|
|
segment = ES;
|
|
offset = BX;
|
|
|
|
if ( (count > 128) || (count == 0) ) {
|
|
BX_INFO("int13_harddisk: function %02x, count out of range!\n",GET_AH());
|
|
goto int13_fail;
|
|
}
|
|
|
|
nlc = read_word(ebda_seg, &EbdaData->ata.devices[device].lchs.cylinders);
|
|
nlh = read_word(ebda_seg, &EbdaData->ata.devices[device].lchs.heads);
|
|
nlspt = read_word(ebda_seg, &EbdaData->ata.devices[device].lchs.spt);
|
|
|
|
// sanity check on cyl heads, sec
|
|
if( (cylinder >= nlc) || (head >= nlh) || (sector > nlspt )) {
|
|
BX_INFO("int13_harddisk: function %02x, parameters out of range %04x/%04x/%04x!\n", GET_AH(), cylinder, head, sector);
|
|
goto int13_fail;
|
|
}
|
|
|
|
// FIXME verify
|
|
if ( GET_AH() == 0x04 ) goto int13_success;
|
|
|
|
nph = read_word(ebda_seg, &EbdaData->ata.devices[device].pchs.heads);
|
|
npspt = read_word(ebda_seg, &EbdaData->ata.devices[device].pchs.spt);
|
|
|
|
// if needed, translate lchs to lba, and execute command
|
|
if ( (nph != nlh) || (npspt != nlspt)) {
|
|
lba = ((((Bit32u)cylinder * (Bit32u)nlh) + (Bit32u)head) * (Bit32u)nlspt) + (Bit32u)sector - 1;
|
|
sector = 0; // this forces the command to be lba
|
|
}
|
|
|
|
if ( GET_AH() == 0x02 )
|
|
status=ata_cmd_data_in(device, ATA_CMD_READ_SECTORS, count, cylinder, head, sector, lba, segment, offset);
|
|
else
|
|
status=ata_cmd_data_out(device, ATA_CMD_WRITE_SECTORS, count, cylinder, head, sector, lba, segment, offset);
|
|
|
|
// Set nb of sector transferred
|
|
SET_AL(read_word(ebda_seg, &EbdaData->ata.trsfsectors));
|
|
|
|
if (status != 0) {
|
|
BX_INFO("int13_harddisk: function %02x, error %02x !\n",GET_AH(),status);
|
|
SET_AH(0x0c);
|
|
goto int13_fail_noah;
|
|
}
|
|
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x05: /* format disk track */
|
|
BX_INFO("format disk track called\n");
|
|
goto int13_success;
|
|
return;
|
|
break;
|
|
|
|
case 0x08: /* read disk drive parameters */
|
|
|
|
// Get logical geometry from table
|
|
nlc = read_word(ebda_seg, &EbdaData->ata.devices[device].lchs.cylinders);
|
|
nlh = read_word(ebda_seg, &EbdaData->ata.devices[device].lchs.heads);
|
|
nlspt = read_word(ebda_seg, &EbdaData->ata.devices[device].lchs.spt);
|
|
count = read_byte(ebda_seg, &EbdaData->ata.hdcount);
|
|
|
|
nlc = nlc - 2; /* 0 based , last sector not used */
|
|
SET_AL(0);
|
|
SET_CH(nlc & 0xff);
|
|
SET_CL(((nlc >> 2) & 0xc0) | (nlspt & 0x3f));
|
|
SET_DH(nlh - 1);
|
|
SET_DL(count); /* FIXME returns 0, 1, or n hard drives */
|
|
|
|
// FIXME should set ES & DI
|
|
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x10: /* check drive ready */
|
|
// should look at 40:8E also???
|
|
|
|
// Read the status from controller
|
|
status = inb(read_word(ebda_seg, &EbdaData->ata.channels[device/2].iobase1) + ATA_CB_STAT);
|
|
if ( (status & ( ATA_CB_STAT_BSY | ATA_CB_STAT_RDY )) == ATA_CB_STAT_RDY ) {
|
|
goto int13_success;
|
|
}
|
|
else {
|
|
SET_AH(0xAA);
|
|
goto int13_fail_noah;
|
|
}
|
|
break;
|
|
|
|
case 0x15: /* read disk drive size */
|
|
|
|
// Get physical geometry from table
|
|
npc = read_word(ebda_seg, &EbdaData->ata.devices[device].pchs.cylinders);
|
|
nph = read_word(ebda_seg, &EbdaData->ata.devices[device].pchs.heads);
|
|
npspt = read_word(ebda_seg, &EbdaData->ata.devices[device].pchs.spt);
|
|
|
|
// Compute sector count seen by int13
|
|
lba = (Bit32u)(npc - 1) * (Bit32u)nph * (Bit32u)npspt;
|
|
CX = lba >> 16;
|
|
DX = lba & 0xffff;
|
|
|
|
SET_AH(3); // hard disk accessible
|
|
goto int13_success_noah;
|
|
break;
|
|
|
|
case 0x41: // IBM/MS installation check
|
|
BX=0xaa55; // install check
|
|
SET_AH(0x30); // EDD 3.0
|
|
CX=0x0007; // ext disk access and edd, removable supported
|
|
goto int13_success_noah;
|
|
break;
|
|
|
|
case 0x42: // IBM/MS extended read
|
|
case 0x43: // IBM/MS extended write
|
|
case 0x44: // IBM/MS verify
|
|
case 0x47: // IBM/MS extended seek
|
|
|
|
count=read_word(DS, SI+(Bit16u)&Int13Ext->count);
|
|
segment=read_word(DS, SI+(Bit16u)&Int13Ext->segment);
|
|
offset=read_word(DS, SI+(Bit16u)&Int13Ext->offset);
|
|
|
|
// Can't use 64 bits lba
|
|
lba=read_dword(DS, SI+(Bit16u)&Int13Ext->lba2);
|
|
if (lba != 0L) {
|
|
BX_PANIC("int13_harddisk: function %02x. Can't use 64bits lba\n",GET_AH());
|
|
goto int13_fail;
|
|
}
|
|
|
|
// Get 32 bits lba and check
|
|
lba=read_dword(DS, SI+(Bit16u)&Int13Ext->lba1);
|
|
if (lba >= read_dword(ebda_seg, &EbdaData->ata.devices[device].sectors) ) {
|
|
BX_INFO("int13_harddisk: function %02x. LBA out of range\n",GET_AH());
|
|
goto int13_fail;
|
|
}
|
|
|
|
// If verify or seek
|
|
if (( GET_AH() == 0x44 ) || ( GET_AH() == 0x47 ))
|
|
goto int13_success;
|
|
|
|
// Execute the command
|
|
if ( GET_AH() == 0x42 )
|
|
status=ata_cmd_data_in(device, ATA_CMD_READ_SECTORS, count, 0, 0, 0, lba, segment, offset);
|
|
else
|
|
status=ata_cmd_data_out(device, ATA_CMD_WRITE_SECTORS, count, 0, 0, 0, lba, segment, offset);
|
|
|
|
count=read_word(ebda_seg, &EbdaData->ata.trsfsectors);
|
|
write_word(DS, SI+(Bit16u)&Int13Ext->count, count);
|
|
|
|
if (status != 0) {
|
|
BX_INFO("int13_harddisk: function %02x, error %02x !\n",GET_AH(),status);
|
|
SET_AH(0x0c);
|
|
goto int13_fail_noah;
|
|
}
|
|
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x45: // IBM/MS lock/unlock drive
|
|
case 0x49: // IBM/MS extended media change
|
|
goto int13_success; // Always success for HD
|
|
break;
|
|
|
|
case 0x46: // IBM/MS eject media
|
|
SET_AH(0xb2); // Volume Not Removable
|
|
goto int13_fail_noah; // Always fail for HD
|
|
break;
|
|
|
|
case 0x48: // IBM/MS get drive parameters
|
|
size=read_word(DS,SI+(Bit16u)&Int13DPT->size);
|
|
|
|
// Buffer is too small
|
|
if(size < 0x1a)
|
|
goto int13_fail;
|
|
|
|
// EDD 1.x
|
|
if(size >= 0x1a) {
|
|
Bit16u blksize;
|
|
|
|
npc = read_word(ebda_seg, &EbdaData->ata.devices[device].pchs.cylinders);
|
|
nph = read_word(ebda_seg, &EbdaData->ata.devices[device].pchs.heads);
|
|
npspt = read_word(ebda_seg, &EbdaData->ata.devices[device].pchs.spt);
|
|
lba = read_dword(ebda_seg, &EbdaData->ata.devices[device].sectors);
|
|
blksize = read_word(ebda_seg, &EbdaData->ata.devices[device].blksize);
|
|
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->size, 0x1a);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->infos, 0x02); // geometry is valid
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->cylinders, (Bit32u)npc);
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->heads, (Bit32u)nph);
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->spt, (Bit32u)npspt);
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->sector_count1, lba); // FIXME should be Bit64
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->sector_count2, 0L);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->blksize, blksize);
|
|
}
|
|
|
|
// EDD 2.x
|
|
if(size >= 0x1e) {
|
|
Bit8u channel, dev, irq, mode, checksum, i, translation;
|
|
Bit16u iobase1, iobase2, options;
|
|
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->size, 0x1e);
|
|
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->dpte_segment, ebda_seg);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->dpte_offset, &EbdaData->ata.dpte);
|
|
|
|
// Fill in dpte
|
|
channel = device / 2;
|
|
iobase1 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase1);
|
|
iobase2 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase2);
|
|
irq = read_byte(ebda_seg, &EbdaData->ata.channels[channel].irq);
|
|
mode = read_byte(ebda_seg, &EbdaData->ata.devices[device].mode);
|
|
translation = read_byte(ebda_seg, &EbdaData->ata.devices[device].translation);
|
|
|
|
options = (translation==ATA_TRANSLATION_NONE?0:1<<3); // chs translation
|
|
options |= (1<<4); // lba translation
|
|
options |= (mode==ATA_MODE_PIO32?1:0<<7);
|
|
options |= (translation==ATA_TRANSLATION_LBA?1:0<<9);
|
|
options |= (translation==ATA_TRANSLATION_RECHS?3:0<<9);
|
|
|
|
write_word(ebda_seg, &EbdaData->ata.dpte.iobase1, iobase1);
|
|
write_word(ebda_seg, &EbdaData->ata.dpte.iobase2, iobase2);
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.prefix, (0xe | (device % 2))<<4 );
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.unused, 0xcb );
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.irq, irq );
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.blkcount, 1 );
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.dma, 0 );
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.pio, 0 );
|
|
write_word(ebda_seg, &EbdaData->ata.dpte.options, options);
|
|
write_word(ebda_seg, &EbdaData->ata.dpte.reserved, 0);
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.revision, 0x11);
|
|
|
|
checksum=0;
|
|
for (i=0; i<15; i++) checksum+=read_byte(ebda_seg, (&EbdaData->ata.dpte) + i);
|
|
checksum = ~checksum;
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.checksum, checksum);
|
|
}
|
|
|
|
// EDD 3.x
|
|
if(size >= 0x42) {
|
|
Bit8u channel, iface, checksum, i;
|
|
Bit16u iobase1;
|
|
|
|
channel = device / 2;
|
|
iface = read_byte(ebda_seg, &EbdaData->ata.channels[channel].iface);
|
|
iobase1 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase1);
|
|
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->size, 0x42);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->key, 0xbedd);
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->dpi_length, 0x24);
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->reserved1, 0);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->reserved2, 0);
|
|
|
|
if (iface==ATA_IFACE_ISA) {
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->host_bus[0], 'I');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->host_bus[1], 'S');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->host_bus[2], 'A');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->host_bus[3], 0);
|
|
}
|
|
else {
|
|
// FIXME PCI
|
|
}
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->iface_type[0], 'A');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->iface_type[1], 'T');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->iface_type[2], 'A');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->iface_type[3], 0);
|
|
|
|
if (iface==ATA_IFACE_ISA) {
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->iface_path[0], iobase1);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->iface_path[2], 0);
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->iface_path[4], 0L);
|
|
}
|
|
else {
|
|
// FIXME PCI
|
|
}
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->device_path[0], device%2);
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->device_path[1], 0);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->device_path[2], 0);
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->device_path[4], 0L);
|
|
|
|
checksum=0;
|
|
for (i=30; i<64; i++) checksum+=read_byte(DS, SI + i);
|
|
checksum = ~checksum;
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->checksum, checksum);
|
|
}
|
|
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x4e: // // IBM/MS set hardware configuration
|
|
// DMA, prefetch, PIO maximum not supported
|
|
switch (GET_AL()) {
|
|
case 0x01:
|
|
case 0x03:
|
|
case 0x04:
|
|
case 0x06:
|
|
goto int13_success;
|
|
break;
|
|
default :
|
|
goto int13_fail;
|
|
}
|
|
break;
|
|
|
|
case 0x09: /* initialize drive parameters */
|
|
case 0x0c: /* seek to specified cylinder */
|
|
case 0x0d: /* alternate disk reset */
|
|
case 0x11: /* recalibrate */
|
|
case 0x14: /* controller internal diagnostic */
|
|
BX_INFO("int13h_harddisk function %02xh unimplemented, returns success\n", GET_AH());
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x0a: /* read disk sectors with ECC */
|
|
case 0x0b: /* write disk sectors with ECC */
|
|
case 0x18: // set media type for format
|
|
case 0x50: // IBM/MS send packet command
|
|
default:
|
|
BX_INFO("int13_harddisk function %02xh unsupported, returns fail\n", GET_AH());
|
|
goto int13_fail;
|
|
break;
|
|
}
|
|
|
|
int13_fail:
|
|
SET_AH(0x01); // defaults to invalid function in AH or invalid parameter
|
|
int13_fail_noah:
|
|
SET_DISK_RET_STATUS(GET_AH());
|
|
int13_fail_nostatus:
|
|
SET_CF(); // error occurred
|
|
return;
|
|
|
|
int13_success:
|
|
SET_AH(0x00); // no error
|
|
int13_success_noah:
|
|
SET_DISK_RET_STATUS(0x00);
|
|
CLEAR_CF(); // no error
|
|
return;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// Start of int13 for cdrom
|
|
// ---------------------------------------------------------------------------
|
|
|
|
void
|
|
int13_cdrom(EHBX, DS, ES, DI, SI, BP, ELDX, BX, DX, CX, AX, IP, CS, FLAGS)
|
|
Bit16u EHBX, DS, ES, DI, SI, BP, ELDX, BX, DX, CX, AX, IP, CS, FLAGS;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit8u device, status, locks;
|
|
Bit8u atacmd[12];
|
|
Bit32u lba;
|
|
Bit16u count, segment, offset, i, size;
|
|
|
|
BX_DEBUG_INT13_CD("int13_cdrom: AX=%04x BX=%04x CX=%04x DX=%04x ES=%04x\n", AX, BX, CX, DX, ES);
|
|
|
|
SET_DISK_RET_STATUS(0x00);
|
|
|
|
/* basic check : device should be 0xE0+ */
|
|
if( (GET_ELDL() < 0xE0) || (GET_ELDL() >= 0xE0+BX_MAX_ATA_DEVICES) ) {
|
|
BX_INFO("int13_cdrom: function %02x, ELDL out of range %02x\n", GET_AH(), GET_ELDL());
|
|
goto int13_fail;
|
|
}
|
|
|
|
// Get the ata channel
|
|
device=read_byte(ebda_seg,&EbdaData->ata.cdidmap[GET_ELDL()-0xE0]);
|
|
|
|
/* basic check : device has to be valid */
|
|
if (device >= BX_MAX_ATA_DEVICES) {
|
|
BX_INFO("int13_cdrom: function %02x, unmapped device for ELDL=%02x\n", GET_AH(), GET_ELDL());
|
|
goto int13_fail;
|
|
}
|
|
|
|
switch (GET_AH()) {
|
|
|
|
// all those functions return SUCCESS
|
|
case 0x00: /* disk controller reset */
|
|
case 0x09: /* initialize drive parameters */
|
|
case 0x0c: /* seek to specified cylinder */
|
|
case 0x0d: /* alternate disk reset */
|
|
case 0x10: /* check drive ready */
|
|
case 0x11: /* recalibrate */
|
|
case 0x14: /* controller internal diagnostic */
|
|
case 0x16: /* detect disk change */
|
|
goto int13_success;
|
|
break;
|
|
|
|
// all those functions return disk write-protected
|
|
case 0x03: /* write disk sectors */
|
|
case 0x05: /* format disk track */
|
|
case 0x43: // IBM/MS extended write
|
|
SET_AH(0x03);
|
|
goto int13_fail_noah;
|
|
break;
|
|
|
|
case 0x01: /* read disk status */
|
|
status = read_byte(0x0040, 0x0074);
|
|
SET_AH(status);
|
|
SET_DISK_RET_STATUS(0);
|
|
|
|
/* set CF if error status read */
|
|
if (status) goto int13_fail_nostatus;
|
|
else goto int13_success_noah;
|
|
break;
|
|
|
|
case 0x15: /* read disk drive size */
|
|
SET_AH(0x02);
|
|
goto int13_fail_noah;
|
|
break;
|
|
|
|
case 0x41: // IBM/MS installation check
|
|
BX=0xaa55; // install check
|
|
SET_AH(0x30); // EDD 2.1
|
|
CX=0x0007; // ext disk access, removable and edd
|
|
goto int13_success_noah;
|
|
break;
|
|
|
|
case 0x42: // IBM/MS extended read
|
|
case 0x44: // IBM/MS verify sectors
|
|
case 0x47: // IBM/MS extended seek
|
|
|
|
count=read_word(DS, SI+(Bit16u)&Int13Ext->count);
|
|
segment=read_word(DS, SI+(Bit16u)&Int13Ext->segment);
|
|
offset=read_word(DS, SI+(Bit16u)&Int13Ext->offset);
|
|
|
|
// Can't use 64 bits lba
|
|
lba=read_dword(DS, SI+(Bit16u)&Int13Ext->lba2);
|
|
if (lba != 0L) {
|
|
BX_PANIC("int13_cdrom: function %02x. Can't use 64bits lba\n",GET_AH());
|
|
goto int13_fail;
|
|
}
|
|
|
|
// Get 32 bits lba
|
|
lba=read_dword(DS, SI+(Bit16u)&Int13Ext->lba1);
|
|
|
|
// If verify or seek
|
|
if (( GET_AH() == 0x44 ) || ( GET_AH() == 0x47 ))
|
|
goto int13_success;
|
|
|
|
memsetb(get_SS(),atacmd,0,12);
|
|
atacmd[0]=0x28; // READ command
|
|
atacmd[7]=(count & 0xff00) >> 8; // Sectors
|
|
atacmd[8]=(count & 0x00ff); // Sectors
|
|
atacmd[2]=(lba & 0xff000000) >> 24; // LBA
|
|
atacmd[3]=(lba & 0x00ff0000) >> 16;
|
|
atacmd[4]=(lba & 0x0000ff00) >> 8;
|
|
atacmd[5]=(lba & 0x000000ff);
|
|
status = ata_cmd_packet(device, 12, get_SS(), atacmd, 0, count*2048L, ATA_DATA_IN, segment,offset);
|
|
|
|
count = (Bit16u)(read_dword(ebda_seg, &EbdaData->ata.trsfbytes) >> 11);
|
|
write_word(DS, SI+(Bit16u)&Int13Ext->count, count);
|
|
|
|
if (status != 0) {
|
|
BX_INFO("int13_cdrom: function %02x, status %02x !\n",GET_AH(),status);
|
|
SET_AH(0x0c);
|
|
goto int13_fail_noah;
|
|
}
|
|
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x45: // IBM/MS lock/unlock drive
|
|
if (GET_AL() > 2) goto int13_fail;
|
|
|
|
locks = read_byte(ebda_seg, &EbdaData->ata.devices[device].lock);
|
|
|
|
switch (GET_AL()) {
|
|
case 0 : // lock
|
|
if (locks == 0xff) {
|
|
SET_AH(0xb4);
|
|
SET_AL(1);
|
|
goto int13_fail_noah;
|
|
}
|
|
write_byte(ebda_seg, &EbdaData->ata.devices[device].lock, ++locks);
|
|
SET_AL(1);
|
|
break;
|
|
case 1 : // unlock
|
|
if (locks == 0x00) {
|
|
SET_AH(0xb0);
|
|
SET_AL(0);
|
|
goto int13_fail_noah;
|
|
}
|
|
write_byte(ebda_seg, &EbdaData->ata.devices[device].lock, --locks);
|
|
SET_AL(locks==0?0:1);
|
|
break;
|
|
case 2 : // status
|
|
SET_AL(locks==0?0:1);
|
|
break;
|
|
}
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x46: // IBM/MS eject media
|
|
locks = read_byte(ebda_seg, &EbdaData->ata.devices[device].lock);
|
|
|
|
if (locks != 0) {
|
|
SET_AH(0xb1); // media locked
|
|
goto int13_fail_noah;
|
|
}
|
|
// FIXME should handle 0x31 no media in device
|
|
// FIXME should handle 0xb5 valid request failed
|
|
|
|
// Call removable media eject
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
mov ah, #0x52
|
|
int 15
|
|
mov _int13_cdrom.status + 2[bp], ah
|
|
jnc int13_cdrom_rme_end
|
|
mov _int13_cdrom.status, #1
|
|
int13_cdrom_rme_end:
|
|
pop bp
|
|
ASM_END
|
|
|
|
if (status != 0) {
|
|
SET_AH(0xb1); // media locked
|
|
goto int13_fail_noah;
|
|
}
|
|
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x48: // IBM/MS get drive parameters
|
|
size = read_word(DS,SI+(Bit16u)&Int13Ext->size);
|
|
|
|
// Buffer is too small
|
|
if(size < 0x1a)
|
|
goto int13_fail;
|
|
|
|
// EDD 1.x
|
|
if(size >= 0x1a) {
|
|
Bit16u cylinders, heads, spt, blksize;
|
|
|
|
blksize = read_word(ebda_seg, &EbdaData->ata.devices[device].blksize);
|
|
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->size, 0x1a);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->infos, 0x74); // removable, media change, lockable, max values
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->cylinders, 0xffffffff);
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->heads, 0xffffffff);
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->spt, 0xffffffff);
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->sector_count1, 0xffffffff); // FIXME should be Bit64
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->sector_count2, 0xffffffff);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->blksize, blksize);
|
|
}
|
|
|
|
// EDD 2.x
|
|
if(size >= 0x1e) {
|
|
Bit8u channel, dev, irq, mode, checksum, i;
|
|
Bit16u iobase1, iobase2, options;
|
|
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->size, 0x1e);
|
|
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->dpte_segment, ebda_seg);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->dpte_offset, &EbdaData->ata.dpte);
|
|
|
|
// Fill in dpte
|
|
channel = device / 2;
|
|
iobase1 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase1);
|
|
iobase2 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase2);
|
|
irq = read_byte(ebda_seg, &EbdaData->ata.channels[channel].irq);
|
|
mode = read_byte(ebda_seg, &EbdaData->ata.devices[device].mode);
|
|
|
|
// FIXME atapi device
|
|
options = (1<<4); // lba translation
|
|
options |= (1<<5); // removable device
|
|
options |= (1<<6); // atapi device
|
|
options |= (mode==ATA_MODE_PIO32?1:0<<7);
|
|
|
|
write_word(ebda_seg, &EbdaData->ata.dpte.iobase1, iobase1);
|
|
write_word(ebda_seg, &EbdaData->ata.dpte.iobase2, iobase2);
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.prefix, (0xe | (device % 2))<<4 );
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.unused, 0xcb );
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.irq, irq );
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.blkcount, 1 );
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.dma, 0 );
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.pio, 0 );
|
|
write_word(ebda_seg, &EbdaData->ata.dpte.options, options);
|
|
write_word(ebda_seg, &EbdaData->ata.dpte.reserved, 0);
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.revision, 0x11);
|
|
|
|
checksum=0;
|
|
for (i=0; i<15; i++) checksum+=read_byte(ebda_seg, (&EbdaData->ata.dpte) + i);
|
|
checksum = ~checksum;
|
|
write_byte(ebda_seg, &EbdaData->ata.dpte.checksum, checksum);
|
|
}
|
|
|
|
// EDD 3.x
|
|
if(size >= 0x42) {
|
|
Bit8u channel, iface, checksum, i;
|
|
Bit16u iobase1;
|
|
|
|
channel = device / 2;
|
|
iface = read_byte(ebda_seg, &EbdaData->ata.channels[channel].iface);
|
|
iobase1 = read_word(ebda_seg, &EbdaData->ata.channels[channel].iobase1);
|
|
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->size, 0x42);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->key, 0xbedd);
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->dpi_length, 0x24);
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->reserved1, 0);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->reserved2, 0);
|
|
|
|
if (iface==ATA_IFACE_ISA) {
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->host_bus[0], 'I');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->host_bus[1], 'S');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->host_bus[2], 'A');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->host_bus[3], 0);
|
|
}
|
|
else {
|
|
// FIXME PCI
|
|
}
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->iface_type[0], 'A');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->iface_type[1], 'T');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->iface_type[2], 'A');
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->iface_type[3], 0);
|
|
|
|
if (iface==ATA_IFACE_ISA) {
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->iface_path[0], iobase1);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->iface_path[2], 0);
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->iface_path[4], 0L);
|
|
}
|
|
else {
|
|
// FIXME PCI
|
|
}
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->device_path[0], device%2);
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->device_path[1], 0);
|
|
write_word(DS, SI+(Bit16u)&Int13DPT->device_path[2], 0);
|
|
write_dword(DS, SI+(Bit16u)&Int13DPT->device_path[4], 0L);
|
|
|
|
checksum=0;
|
|
for (i=30; i<64; i++) checksum+=read_byte(DS, SI + i);
|
|
checksum = ~checksum;
|
|
write_byte(DS, SI+(Bit16u)&Int13DPT->checksum, checksum);
|
|
}
|
|
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x49: // IBM/MS extended media change
|
|
// always send changed ??
|
|
SET_AH(06);
|
|
goto int13_fail_nostatus;
|
|
break;
|
|
|
|
case 0x4e: // // IBM/MS set hardware configuration
|
|
// DMA, prefetch, PIO maximum not supported
|
|
switch (GET_AL()) {
|
|
case 0x01:
|
|
case 0x03:
|
|
case 0x04:
|
|
case 0x06:
|
|
goto int13_success;
|
|
break;
|
|
default :
|
|
goto int13_fail;
|
|
}
|
|
break;
|
|
|
|
// all those functions return unimplemented
|
|
case 0x02: /* read sectors */
|
|
case 0x04: /* verify sectors */
|
|
case 0x08: /* read disk drive parameters */
|
|
case 0x0a: /* read disk sectors with ECC */
|
|
case 0x0b: /* write disk sectors with ECC */
|
|
case 0x18: /* set media type for format */
|
|
case 0x50: // ? - send packet command
|
|
default:
|
|
BX_INFO("int13_cdrom: unsupported AH=%02x\n", GET_AH());
|
|
goto int13_fail;
|
|
break;
|
|
}
|
|
|
|
int13_fail:
|
|
SET_AH(0x01); // defaults to invalid function in AH or invalid parameter
|
|
int13_fail_noah:
|
|
SET_DISK_RET_STATUS(GET_AH());
|
|
int13_fail_nostatus:
|
|
SET_CF(); // error occurred
|
|
return;
|
|
|
|
int13_success:
|
|
SET_AH(0x00); // no error
|
|
int13_success_noah:
|
|
SET_DISK_RET_STATUS(0x00);
|
|
CLEAR_CF(); // no error
|
|
return;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// End of int13 for cdrom
|
|
// ---------------------------------------------------------------------------
|
|
|
|
#if BX_ELTORITO_BOOT
|
|
// ---------------------------------------------------------------------------
|
|
// Start of int13 for eltorito functions
|
|
// ---------------------------------------------------------------------------
|
|
|
|
void
|
|
int13_eltorito(DS, ES, DI, SI, BP, SP, BX, DX, CX, AX, IP, CS, FLAGS)
|
|
Bit16u DS, ES, DI, SI, BP, SP, BX, DX, CX, AX, IP, CS, FLAGS;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
|
|
BX_DEBUG_INT13_ET("int13_eltorito: AX=%04x BX=%04x CX=%04x DX=%04x ES=%04x\n", AX, BX, CX, DX, ES);
|
|
// BX_DEBUG_INT13_ET("int13_eltorito: SS=%04x DS=%04x ES=%04x DI=%04x SI=%04x\n",get_SS(), DS, ES, DI, SI);
|
|
|
|
switch (GET_AH()) {
|
|
|
|
// FIXME ElTorito Various. Should be implemented
|
|
case 0x4a: // ElTorito - Initiate disk emu
|
|
case 0x4c: // ElTorito - Initiate disk emu and boot
|
|
case 0x4d: // ElTorito - Return Boot catalog
|
|
BX_PANIC("Int13 eltorito call with AX=%04x. Please report\n",AX);
|
|
goto int13_fail;
|
|
break;
|
|
|
|
case 0x4b: // ElTorito - Terminate disk emu
|
|
// FIXME ElTorito Hardcoded
|
|
write_byte(DS,SI+0x00,0x13);
|
|
write_byte(DS,SI+0x01,read_byte(ebda_seg,&EbdaData->cdemu.media));
|
|
write_byte(DS,SI+0x02,read_byte(ebda_seg,&EbdaData->cdemu.emulated_drive));
|
|
write_byte(DS,SI+0x03,read_byte(ebda_seg,&EbdaData->cdemu.controller_index));
|
|
write_dword(DS,SI+0x04,read_dword(ebda_seg,&EbdaData->cdemu.ilba));
|
|
write_word(DS,SI+0x08,read_word(ebda_seg,&EbdaData->cdemu.device_spec));
|
|
write_word(DS,SI+0x0a,read_word(ebda_seg,&EbdaData->cdemu.buffer_segment));
|
|
write_word(DS,SI+0x0c,read_word(ebda_seg,&EbdaData->cdemu.load_segment));
|
|
write_word(DS,SI+0x0e,read_word(ebda_seg,&EbdaData->cdemu.sector_count));
|
|
write_byte(DS,SI+0x10,read_byte(ebda_seg,&EbdaData->cdemu.vdevice.cylinders));
|
|
write_byte(DS,SI+0x11,read_byte(ebda_seg,&EbdaData->cdemu.vdevice.spt));
|
|
write_byte(DS,SI+0x12,read_byte(ebda_seg,&EbdaData->cdemu.vdevice.heads));
|
|
|
|
// If we have to terminate emulation
|
|
if(GET_AL() == 0x00) {
|
|
// FIXME ElTorito Various. Should be handled accordingly to spec
|
|
write_byte(ebda_seg,&EbdaData->cdemu.active, 0x00); // bye bye
|
|
}
|
|
|
|
goto int13_success;
|
|
break;
|
|
|
|
default:
|
|
BX_INFO("int13_eltorito: unsupported AH=%02x\n", GET_AH());
|
|
goto int13_fail;
|
|
break;
|
|
}
|
|
|
|
int13_fail:
|
|
SET_AH(0x01); // defaults to invalid function in AH or invalid parameter
|
|
SET_DISK_RET_STATUS(GET_AH());
|
|
SET_CF(); // error occurred
|
|
return;
|
|
|
|
int13_success:
|
|
SET_AH(0x00); // no error
|
|
SET_DISK_RET_STATUS(0x00);
|
|
CLEAR_CF(); // no error
|
|
return;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// End of int13 for eltorito functions
|
|
// ---------------------------------------------------------------------------
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// Start of int13 when emulating a device from the cd
|
|
// ---------------------------------------------------------------------------
|
|
|
|
void
|
|
int13_cdemu(DS, ES, DI, SI, BP, SP, BX, DX, CX, AX, IP, CS, FLAGS)
|
|
Bit16u DS, ES, DI, SI, BP, SP, BX, DX, CX, AX, IP, CS, FLAGS;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit8u device, status;
|
|
Bit16u vheads, vspt, vcylinders;
|
|
Bit16u head, sector, cylinder, nbsectors;
|
|
Bit32u vlba, ilba, slba, elba;
|
|
Bit16u before, segment, offset;
|
|
Bit8u atacmd[12];
|
|
|
|
BX_DEBUG_INT13_ET("int13_cdemu: AX=%04x BX=%04x CX=%04x DX=%04x ES=%04x\n", AX, BX, CX, DX, ES);
|
|
|
|
/* at this point, we are emulating a floppy/harddisk */
|
|
|
|
// Recompute the device number
|
|
device = read_byte(ebda_seg,&EbdaData->cdemu.controller_index) * 2;
|
|
device += read_byte(ebda_seg,&EbdaData->cdemu.device_spec);
|
|
|
|
SET_DISK_RET_STATUS(0x00);
|
|
|
|
/* basic checks : emulation should be active, dl should equal the emulated drive */
|
|
if( (read_byte(ebda_seg,&EbdaData->cdemu.active) ==0 )
|
|
|| (read_byte(ebda_seg,&EbdaData->cdemu.emulated_drive ) != GET_DL())) {
|
|
BX_INFO("int13_cdemu: function %02x, emulation not active for DL= %02x\n", GET_AH(), GET_DL());
|
|
goto int13_fail;
|
|
}
|
|
|
|
switch (GET_AH()) {
|
|
|
|
// all those functions return SUCCESS
|
|
case 0x00: /* disk controller reset */
|
|
case 0x09: /* initialize drive parameters */
|
|
case 0x0c: /* seek to specified cylinder */
|
|
case 0x0d: /* alternate disk reset */ // FIXME ElTorito Various. should really reset ?
|
|
case 0x10: /* check drive ready */ // FIXME ElTorito Various. should check if ready ?
|
|
case 0x11: /* recalibrate */
|
|
case 0x14: /* controller internal diagnostic */
|
|
case 0x16: /* detect disk change */
|
|
goto int13_success;
|
|
break;
|
|
|
|
// all those functions return disk write-protected
|
|
case 0x03: /* write disk sectors */
|
|
case 0x05: /* format disk track */
|
|
SET_AH(0x03);
|
|
goto int13_fail_noah;
|
|
break;
|
|
|
|
case 0x01: /* read disk status */
|
|
status=read_byte(0x0040, 0x0074);
|
|
SET_AH(status);
|
|
SET_DISK_RET_STATUS(0);
|
|
|
|
/* set CF if error status read */
|
|
if (status) goto int13_fail_nostatus;
|
|
else goto int13_success_noah;
|
|
break;
|
|
|
|
case 0x02: // read disk sectors
|
|
case 0x04: // verify disk sectors
|
|
vspt = read_word(ebda_seg,&EbdaData->cdemu.vdevice.spt);
|
|
vcylinders = read_word(ebda_seg,&EbdaData->cdemu.vdevice.cylinders);
|
|
vheads = read_word(ebda_seg,&EbdaData->cdemu.vdevice.heads);
|
|
|
|
ilba = read_dword(ebda_seg,&EbdaData->cdemu.ilba);
|
|
|
|
sector = GET_CL() & 0x003f;
|
|
cylinder = (GET_CL() & 0x00c0) << 2 | GET_CH();
|
|
head = GET_DH();
|
|
nbsectors = GET_AL();
|
|
segment = ES;
|
|
offset = BX;
|
|
|
|
// no sector to read ?
|
|
if(nbsectors==0) goto int13_success;
|
|
|
|
// sanity checks sco openserver needs this!
|
|
if ((sector > vspt)
|
|
|| (cylinder >= vcylinders)
|
|
|| (head >= vheads)) {
|
|
goto int13_fail;
|
|
}
|
|
|
|
// After controls, verify do nothing
|
|
if (GET_AH() == 0x04) goto int13_success;
|
|
|
|
segment = ES+(BX / 16);
|
|
offset = BX % 16;
|
|
|
|
// calculate the virtual lba inside the image
|
|
vlba=((((Bit32u)cylinder*(Bit32u)vheads)+(Bit32u)head)*(Bit32u)vspt)+((Bit32u)(sector-1));
|
|
|
|
// In advance so we don't loose the count
|
|
SET_AL(nbsectors);
|
|
|
|
// start lba on cd
|
|
slba = (Bit32u)vlba/4;
|
|
before= (Bit16u)vlba%4;
|
|
|
|
// end lba on cd
|
|
elba = (Bit32u)(vlba+nbsectors-1)/4;
|
|
|
|
memsetb(get_SS(),atacmd,0,12);
|
|
atacmd[0]=0x28; // READ command
|
|
atacmd[7]=((Bit16u)(elba-slba+1) & 0xff00) >> 8; // Sectors
|
|
atacmd[8]=((Bit16u)(elba-slba+1) & 0x00ff); // Sectors
|
|
atacmd[2]=(ilba+slba & 0xff000000) >> 24; // LBA
|
|
atacmd[3]=(ilba+slba & 0x00ff0000) >> 16;
|
|
atacmd[4]=(ilba+slba & 0x0000ff00) >> 8;
|
|
atacmd[5]=(ilba+slba & 0x000000ff);
|
|
if((status = ata_cmd_packet(device, 12, get_SS(), atacmd, before*512, nbsectors*512L, ATA_DATA_IN, segment,offset)) != 0) {
|
|
BX_INFO("int13_cdemu: function %02x, error %02x !\n",GET_AH(),status);
|
|
SET_AH(0x02);
|
|
SET_AL(0);
|
|
goto int13_fail_noah;
|
|
}
|
|
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x08: /* read disk drive parameters */
|
|
vspt=read_word(ebda_seg,&EbdaData->cdemu.vdevice.spt);
|
|
vcylinders=read_word(ebda_seg,&EbdaData->cdemu.vdevice.cylinders) - 1;
|
|
vheads=read_word(ebda_seg,&EbdaData->cdemu.vdevice.heads) - 1;
|
|
|
|
SET_AL( 0x00 );
|
|
SET_BL( 0x00 );
|
|
SET_CH( vcylinders & 0xff );
|
|
SET_CL((( vcylinders >> 2) & 0xc0) | ( vspt & 0x3f ));
|
|
SET_DH( vheads );
|
|
SET_DL( 0x02 ); // FIXME ElTorito Various. should send the real count of drives 1 or 2
|
|
// FIXME ElTorito Harddisk. should send the HD count
|
|
|
|
switch(read_byte(ebda_seg,&EbdaData->cdemu.media)) {
|
|
case 0x01: SET_BL( 0x02 ); break;
|
|
case 0x02: SET_BL( 0x04 ); break;
|
|
case 0x03: SET_BL( 0x06 ); break;
|
|
}
|
|
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
mov ax, #diskette_param_table2
|
|
mov _int13_cdemu.DI+2[bp], ax
|
|
mov _int13_cdemu.ES+2[bp], cs
|
|
pop bp
|
|
ASM_END
|
|
goto int13_success;
|
|
break;
|
|
|
|
case 0x15: /* read disk drive size */
|
|
// FIXME ElTorito Harddisk. What geometry to send ?
|
|
SET_AH(0x03);
|
|
goto int13_success_noah;
|
|
break;
|
|
|
|
// all those functions return unimplemented
|
|
case 0x0a: /* read disk sectors with ECC */
|
|
case 0x0b: /* write disk sectors with ECC */
|
|
case 0x18: /* set media type for format */
|
|
case 0x41: // IBM/MS installation check
|
|
// FIXME ElTorito Harddisk. Darwin would like to use EDD
|
|
case 0x42: // IBM/MS extended read
|
|
case 0x43: // IBM/MS extended write
|
|
case 0x44: // IBM/MS verify sectors
|
|
case 0x45: // IBM/MS lock/unlock drive
|
|
case 0x46: // IBM/MS eject media
|
|
case 0x47: // IBM/MS extended seek
|
|
case 0x48: // IBM/MS get drive parameters
|
|
case 0x49: // IBM/MS extended media change
|
|
case 0x4e: // ? - set hardware configuration
|
|
case 0x50: // ? - send packet command
|
|
default:
|
|
BX_INFO("int13_cdemu function AH=%02x unsupported, returns fail\n", GET_AH());
|
|
goto int13_fail;
|
|
break;
|
|
}
|
|
|
|
int13_fail:
|
|
SET_AH(0x01); // defaults to invalid function in AH or invalid parameter
|
|
int13_fail_noah:
|
|
SET_DISK_RET_STATUS(GET_AH());
|
|
int13_fail_nostatus:
|
|
SET_CF(); // error occurred
|
|
return;
|
|
|
|
int13_success:
|
|
SET_AH(0x00); // no error
|
|
int13_success_noah:
|
|
SET_DISK_RET_STATUS(0x00);
|
|
CLEAR_CF(); // no error
|
|
return;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------
|
|
// End of int13 when emulating a device from the cd
|
|
// ---------------------------------------------------------------------------
|
|
|
|
#endif // BX_ELTORITO_BOOT
|
|
|
|
#else //BX_USE_ATADRV
|
|
|
|
void
|
|
outLBA(cylinder,hd_heads,head,hd_sectors,sector,dl)
|
|
Bit16u cylinder;
|
|
Bit16u hd_heads;
|
|
Bit16u head;
|
|
Bit16u hd_sectors;
|
|
Bit16u sector;
|
|
Bit16u dl;
|
|
{
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
push eax
|
|
push ebx
|
|
push edx
|
|
xor eax,eax
|
|
mov ax,4[bp] // cylinder
|
|
xor ebx,ebx
|
|
mov bl,6[bp] // hd_heads
|
|
imul ebx
|
|
|
|
mov bl,8[bp] // head
|
|
add eax,ebx
|
|
mov bl,10[bp] // hd_sectors
|
|
imul ebx
|
|
mov bl,12[bp] // sector
|
|
add eax,ebx
|
|
|
|
dec eax
|
|
mov dx,#0x1f3
|
|
out dx,al
|
|
mov dx,#0x1f4
|
|
mov al,ah
|
|
out dx,al
|
|
shr eax,#16
|
|
mov dx,#0x1f5
|
|
out dx,al
|
|
and ah,#0xf
|
|
mov bl,14[bp] // dl
|
|
and bl,#1
|
|
shl bl,#4
|
|
or ah,bl
|
|
or ah,#0xe0
|
|
mov al,ah
|
|
mov dx,#0x01f6
|
|
out dx,al
|
|
pop edx
|
|
pop ebx
|
|
pop eax
|
|
pop bp
|
|
ASM_END
|
|
}
|
|
|
|
void
|
|
int13_harddisk(DS, ES, DI, SI, BP, ELDX, BX, DX, CX, AX, IP, CS, FLAGS)
|
|
Bit16u DS, ES, DI, SI, BP, ELDX, BX, DX, CX, AX, IP, CS, FLAGS;
|
|
{
|
|
Bit8u drive, num_sectors, sector, head, status, mod;
|
|
Bit8u drive_map;
|
|
Bit8u n_drives;
|
|
Bit16u cyl_mod, ax;
|
|
Bit16u max_cylinder, cylinder, total_sectors;
|
|
Bit16u hd_cylinders;
|
|
Bit8u hd_heads, hd_sectors;
|
|
Bit16u val16;
|
|
Bit8u sector_count;
|
|
unsigned int i;
|
|
Bit16u tempbx;
|
|
Bit16u dpsize;
|
|
|
|
Bit16u count, segment, offset;
|
|
Bit32u lba;
|
|
Bit16u error;
|
|
|
|
BX_DEBUG_INT13_HD("int13 harddisk: AX=%04x BX=%04x CX=%04x DX=%04x ES=%04x\n", AX, BX, CX, DX, ES);
|
|
|
|
write_byte(0x0040, 0x008e, 0); // clear completion flag
|
|
|
|
/* at this point, DL is >= 0x80 to be passed from the floppy int13h
|
|
handler code */
|
|
/* check how many disks first (cmos reg 0x12), return an error if
|
|
drive not present */
|
|
drive_map = inb_cmos(0x12);
|
|
drive_map = (((drive_map & 0xf0)==0) ? 0 : 1) |
|
|
(((drive_map & 0x0f)==0) ? 0 : 2);
|
|
n_drives = (drive_map==0) ? 0 :
|
|
((drive_map==3) ? 2 : 1);
|
|
|
|
if (!(drive_map & (1<<(GET_ELDL()&0x7f)))) { /* allow 0, 1, or 2 disks */
|
|
SET_AH(0x01);
|
|
SET_DISK_RET_STATUS(0x01);
|
|
SET_CF(); /* error occurred */
|
|
return;
|
|
}
|
|
|
|
switch (GET_AH()) {
|
|
|
|
case 0x00: /* disk controller reset */
|
|
BX_DEBUG_INT13_HD("int13_f00\n");
|
|
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
set_diskette_ret_status(0);
|
|
set_diskette_current_cyl(0, 0); /* current cylinder, diskette 1 */
|
|
set_diskette_current_cyl(1, 0); /* current cylinder, diskette 2 */
|
|
CLEAR_CF(); /* successful */
|
|
return;
|
|
break;
|
|
|
|
case 0x01: /* read disk status */
|
|
BX_DEBUG_INT13_HD("int13_f01\n");
|
|
status = read_byte(0x0040, 0x0074);
|
|
SET_AH(status);
|
|
SET_DISK_RET_STATUS(0);
|
|
/* set CF if error status read */
|
|
if (status) SET_CF();
|
|
else CLEAR_CF();
|
|
return;
|
|
break;
|
|
|
|
case 0x04: // verify disk sectors
|
|
case 0x02: // read disk sectors
|
|
drive = GET_ELDL();
|
|
get_hd_geometry(drive, &hd_cylinders, &hd_heads, &hd_sectors);
|
|
|
|
num_sectors = GET_AL();
|
|
cylinder = (GET_CL() & 0x00c0) << 2 | GET_CH();
|
|
sector = (GET_CL() & 0x3f);
|
|
head = GET_DH();
|
|
|
|
|
|
if (hd_cylinders > 1024) {
|
|
if (hd_cylinders <= 2048) {
|
|
cylinder <<= 1;
|
|
}
|
|
else if (hd_cylinders <= 4096) {
|
|
cylinder <<= 2;
|
|
}
|
|
else if (hd_cylinders <= 8192) {
|
|
cylinder <<= 3;
|
|
}
|
|
else { // hd_cylinders <= 16384
|
|
cylinder <<= 4;
|
|
}
|
|
|
|
ax = head / hd_heads;
|
|
cyl_mod = ax & 0xff;
|
|
head = ax >> 8;
|
|
cylinder |= cyl_mod;
|
|
}
|
|
|
|
if ( (cylinder >= hd_cylinders) ||
|
|
(sector > hd_sectors) ||
|
|
(head >= hd_heads) ) {
|
|
SET_AH(1);
|
|
SET_DISK_RET_STATUS(1);
|
|
SET_CF(); /* error occurred */
|
|
return;
|
|
}
|
|
|
|
if ( (num_sectors > 128) || (num_sectors == 0) )
|
|
BX_PANIC("int13_harddisk(): num_sectors out of range!\n");
|
|
|
|
if (head > 15)
|
|
BX_PANIC("hard drive BIOS:(read/verify) head > 15\n");
|
|
|
|
if ( GET_AH() == 0x04 ) {
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
CLEAR_CF();
|
|
return;
|
|
}
|
|
|
|
status = inb(0x1f7);
|
|
if (status & 0x80) {
|
|
BX_PANIC("hard drive BIOS:(read/verify) BUSY bit set\n");
|
|
}
|
|
outb(0x01f2, num_sectors);
|
|
/* activate LBA? (tomv) */
|
|
if (hd_heads > 16) {
|
|
BX_DEBUG_INT13_HD("CHS: %x %x %x\n", cylinder, head, sector);
|
|
outLBA(cylinder,hd_heads,head,hd_sectors,sector,drive);
|
|
}
|
|
else {
|
|
outb(0x01f3, sector);
|
|
outb(0x01f4, cylinder & 0x00ff);
|
|
outb(0x01f5, cylinder >> 8);
|
|
outb(0x01f6, 0xa0 | ((drive & 0x01)<<4) | (head & 0x0f));
|
|
}
|
|
outb(0x01f7, 0x20);
|
|
|
|
while (1) {
|
|
status = inb(0x1f7);
|
|
if ( !(status & 0x80) ) break;
|
|
}
|
|
|
|
if (status & 0x01) {
|
|
BX_PANIC("hard drive BIOS:(read/verify) read error\n");
|
|
} else if ( !(status & 0x08) ) {
|
|
BX_DEBUG_INT13_HD("status was %02x\n", (unsigned) status);
|
|
BX_PANIC("hard drive BIOS:(read/verify) expected DRQ=1\n");
|
|
}
|
|
|
|
sector_count = 0;
|
|
tempbx = BX;
|
|
|
|
ASM_START
|
|
sti ;; enable higher priority interrupts
|
|
ASM_END
|
|
|
|
while (1) {
|
|
ASM_START
|
|
;; store temp bx in real DI register
|
|
push bp
|
|
mov bp, sp
|
|
mov di, _int13_harddisk.tempbx + 2 [bp]
|
|
pop bp
|
|
|
|
;; adjust if there will be an overrun
|
|
cmp di, #0xfe00
|
|
jbe i13_f02_no_adjust
|
|
i13_f02_adjust:
|
|
sub di, #0x0200 ; sub 512 bytes from offset
|
|
mov ax, es
|
|
add ax, #0x0020 ; add 512 to segment
|
|
mov es, ax
|
|
|
|
i13_f02_no_adjust:
|
|
mov cx, #0x0100 ;; counter (256 words = 512b)
|
|
mov dx, #0x01f0 ;; AT data read port
|
|
|
|
rep
|
|
insw ;; CX words transfered from port(DX) to ES:[DI]
|
|
|
|
i13_f02_done:
|
|
;; store real DI register back to temp bx
|
|
push bp
|
|
mov bp, sp
|
|
mov _int13_harddisk.tempbx + 2 [bp], di
|
|
pop bp
|
|
ASM_END
|
|
|
|
sector_count++;
|
|
num_sectors--;
|
|
if (num_sectors == 0) {
|
|
status = inb(0x1f7);
|
|
if ( (status & 0xc9) != 0x40 )
|
|
BX_PANIC("no sectors left to read/verify, status is %02x\n", (unsigned) status);
|
|
break;
|
|
}
|
|
else {
|
|
status = inb(0x1f7);
|
|
if ( (status & 0xc9) != 0x48 )
|
|
BX_PANIC("more sectors left to read/verify, status is %02x\n", (unsigned) status);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
SET_AL(sector_count);
|
|
CLEAR_CF(); /* successful */
|
|
return;
|
|
break;
|
|
|
|
|
|
case 0x03: /* write disk sectors */
|
|
BX_DEBUG_INT13_HD("int13_f03\n");
|
|
drive = GET_ELDL ();
|
|
get_hd_geometry(drive, &hd_cylinders, &hd_heads, &hd_sectors);
|
|
|
|
num_sectors = GET_AL();
|
|
cylinder = GET_CH();
|
|
cylinder |= ( ((Bit16u) GET_CL()) << 2) & 0x300;
|
|
sector = (GET_CL() & 0x3f);
|
|
head = GET_DH();
|
|
|
|
if (hd_cylinders > 1024) {
|
|
if (hd_cylinders <= 2048) {
|
|
cylinder <<= 1;
|
|
}
|
|
else if (hd_cylinders <= 4096) {
|
|
cylinder <<= 2;
|
|
}
|
|
else if (hd_cylinders <= 8192) {
|
|
cylinder <<= 3;
|
|
}
|
|
else { // hd_cylinders <= 16384
|
|
cylinder <<= 4;
|
|
}
|
|
|
|
ax = head / hd_heads;
|
|
cyl_mod = ax & 0xff;
|
|
head = ax >> 8;
|
|
cylinder |= cyl_mod;
|
|
}
|
|
|
|
if ( (cylinder >= hd_cylinders) ||
|
|
(sector > hd_sectors) ||
|
|
(head >= hd_heads) ) {
|
|
SET_AH( 1);
|
|
SET_DISK_RET_STATUS(1);
|
|
SET_CF(); /* error occurred */
|
|
return;
|
|
}
|
|
|
|
if ( (num_sectors > 128) || (num_sectors == 0) )
|
|
BX_PANIC("int13_harddisk(): num_sectors out of range!\n");
|
|
|
|
if (head > 15)
|
|
BX_PANIC("hard drive BIOS:(read) head > 15\n");
|
|
|
|
status = inb(0x1f7);
|
|
if (status & 0x80) {
|
|
BX_PANIC("hard drive BIOS:(read) BUSY bit set\n");
|
|
}
|
|
// should check for Drive Ready Bit also in status reg
|
|
outb(0x01f2, num_sectors);
|
|
|
|
/* activate LBA? (tomv) */
|
|
if (hd_heads > 16) {
|
|
BX_DEBUG_INT13_HD("CHS (write): %x %x %x\n", cylinder, head, sector);
|
|
outLBA(cylinder,hd_heads,head,hd_sectors,sector,GET_ELDL());
|
|
}
|
|
else {
|
|
outb(0x01f3, sector);
|
|
outb(0x01f4, cylinder & 0x00ff);
|
|
outb(0x01f5, cylinder >> 8);
|
|
outb(0x01f6, 0xa0 | ((GET_ELDL() & 0x01)<<4) | (head & 0x0f));
|
|
}
|
|
outb(0x01f7, 0x30);
|
|
|
|
// wait for busy bit to turn off after seeking
|
|
while (1) {
|
|
status = inb(0x1f7);
|
|
if ( !(status & 0x80) ) break;
|
|
}
|
|
|
|
if ( !(status & 0x08) ) {
|
|
BX_DEBUG_INT13_HD("status was %02x\n", (unsigned) status);
|
|
BX_PANIC("hard drive BIOS:(write) data-request bit not set\n");
|
|
}
|
|
|
|
sector_count = 0;
|
|
tempbx = BX;
|
|
|
|
ASM_START
|
|
sti ;; enable higher priority interrupts
|
|
ASM_END
|
|
|
|
while (1) {
|
|
ASM_START
|
|
;; store temp bx in real SI register
|
|
push bp
|
|
mov bp, sp
|
|
mov si, _int13_harddisk.tempbx + 2 [bp]
|
|
pop bp
|
|
|
|
;; adjust if there will be an overrun
|
|
cmp si, #0xfe00
|
|
jbe i13_f03_no_adjust
|
|
i13_f03_adjust:
|
|
sub si, #0x0200 ; sub 512 bytes from offset
|
|
mov ax, es
|
|
add ax, #0x0020 ; add 512 to segment
|
|
mov es, ax
|
|
|
|
i13_f03_no_adjust:
|
|
mov cx, #0x0100 ;; counter (256 words = 512b)
|
|
mov dx, #0x01f0 ;; AT data read port
|
|
|
|
seg ES
|
|
rep
|
|
outsw ;; CX words tranfered from ES:[SI] to port(DX)
|
|
|
|
;; store real SI register back to temp bx
|
|
push bp
|
|
mov bp, sp
|
|
mov _int13_harddisk.tempbx + 2 [bp], si
|
|
pop bp
|
|
ASM_END
|
|
|
|
sector_count++;
|
|
num_sectors--;
|
|
if (num_sectors == 0) {
|
|
status = inb(0x1f7);
|
|
if ( (status & 0xe9) != 0x40 )
|
|
BX_PANIC("no sectors left to write, status is %02x\n", (unsigned) status);
|
|
break;
|
|
}
|
|
else {
|
|
status = inb(0x1f7);
|
|
if ( (status & 0xc9) != 0x48 )
|
|
BX_PANIC("more sectors left to write, status is %02x\n", (unsigned) status);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
SET_AL(sector_count);
|
|
CLEAR_CF(); /* successful */
|
|
return;
|
|
break;
|
|
|
|
case 0x05: /* format disk track */
|
|
BX_DEBUG_INT13_HD("int13_f05\n");
|
|
BX_PANIC("format disk track called\n");
|
|
/* nop */
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
CLEAR_CF(); /* successful */
|
|
return;
|
|
break;
|
|
|
|
case 0x08: /* read disk drive parameters */
|
|
BX_DEBUG_INT13_HD("int13_f08\n");
|
|
|
|
drive = GET_ELDL ();
|
|
get_hd_geometry(drive, &hd_cylinders, &hd_heads, &hd_sectors);
|
|
|
|
// translate CHS
|
|
//
|
|
if (hd_cylinders <= 1024) {
|
|
// hd_cylinders >>= 0;
|
|
// hd_heads <<= 0;
|
|
}
|
|
else if (hd_cylinders <= 2048) {
|
|
hd_cylinders >>= 1;
|
|
hd_heads <<= 1;
|
|
}
|
|
else if (hd_cylinders <= 4096) {
|
|
hd_cylinders >>= 2;
|
|
hd_heads <<= 2;
|
|
}
|
|
else if (hd_cylinders <= 8192) {
|
|
hd_cylinders >>= 3;
|
|
hd_heads <<= 3;
|
|
}
|
|
else { // hd_cylinders <= 16384
|
|
hd_cylinders >>= 4;
|
|
hd_heads <<= 4;
|
|
}
|
|
|
|
max_cylinder = hd_cylinders - 2; /* 0 based */
|
|
SET_AL(0);
|
|
SET_CH(max_cylinder & 0xff);
|
|
SET_CL(((max_cylinder >> 2) & 0xc0) | (hd_sectors & 0x3f));
|
|
SET_DH(hd_heads - 1);
|
|
SET_DL(n_drives); /* returns 0, 1, or 2 hard drives */
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
CLEAR_CF(); /* successful */
|
|
|
|
return;
|
|
break;
|
|
|
|
case 0x09: /* initialize drive parameters */
|
|
BX_DEBUG_INT13_HD("int13_f09\n");
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
CLEAR_CF(); /* successful */
|
|
return;
|
|
break;
|
|
|
|
case 0x0a: /* read disk sectors with ECC */
|
|
BX_DEBUG_INT13_HD("int13_f0a\n");
|
|
case 0x0b: /* write disk sectors with ECC */
|
|
BX_DEBUG_INT13_HD("int13_f0b\n");
|
|
BX_PANIC("int13h Functions 0Ah & 0Bh not implemented!\n");
|
|
return;
|
|
break;
|
|
|
|
case 0x0c: /* seek to specified cylinder */
|
|
BX_DEBUG_INT13_HD("int13_f0c\n");
|
|
BX_INFO("int13h function 0ch (seek) not implemented!\n");
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
CLEAR_CF(); /* successful */
|
|
return;
|
|
break;
|
|
|
|
case 0x0d: /* alternate disk reset */
|
|
BX_DEBUG_INT13_HD("int13_f0d\n");
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
CLEAR_CF(); /* successful */
|
|
return;
|
|
break;
|
|
|
|
case 0x10: /* check drive ready */
|
|
BX_DEBUG_INT13_HD("int13_f10\n");
|
|
//SET_AH(0);
|
|
//SET_DISK_RET_STATUS(0);
|
|
//CLEAR_CF(); /* successful */
|
|
//return;
|
|
//break;
|
|
|
|
// should look at 40:8E also???
|
|
status = inb(0x01f7);
|
|
if ( (status & 0xc0) == 0x40 ) {
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
CLEAR_CF(); // drive ready
|
|
return;
|
|
}
|
|
else {
|
|
SET_AH(0xAA);
|
|
SET_DISK_RET_STATUS(0xAA);
|
|
SET_CF(); // not ready
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case 0x11: /* recalibrate */
|
|
BX_DEBUG_INT13_HD("int13_f11\n");
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
CLEAR_CF(); /* successful */
|
|
return;
|
|
break;
|
|
|
|
case 0x14: /* controller internal diagnostic */
|
|
BX_DEBUG_INT13_HD("int13_f14\n");
|
|
SET_AH(0);
|
|
SET_DISK_RET_STATUS(0);
|
|
CLEAR_CF(); /* successful */
|
|
SET_AL(0);
|
|
return;
|
|
break;
|
|
|
|
case 0x15: /* read disk drive size */
|
|
drive = GET_ELDL();
|
|
get_hd_geometry(drive, &hd_cylinders, &hd_heads, &hd_sectors);
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
mov al, _int13_harddisk.hd_heads + 2 [bp]
|
|
mov ah, _int13_harddisk.hd_sectors + 2 [bp]
|
|
mul al, ah ;; ax = heads * sectors
|
|
mov bx, _int13_harddisk.hd_cylinders + 2 [bp]
|
|
dec bx ;; use (cylinders - 1) ???
|
|
mul ax, bx ;; dx:ax = (cylinders -1) * (heads * sectors)
|
|
;; now we need to move the 32bit result dx:ax to what the
|
|
;; BIOS wants which is cx:dx.
|
|
;; and then into CX:DX on the stack
|
|
mov _int13_harddisk.CX + 2 [bp], dx
|
|
mov _int13_harddisk.DX + 2 [bp], ax
|
|
pop bp
|
|
ASM_END
|
|
SET_AH(3); // hard disk accessible
|
|
SET_DISK_RET_STATUS(0); // ??? should this be 0
|
|
CLEAR_CF(); // successful
|
|
return;
|
|
break;
|
|
|
|
case 0x18: // set media type for format
|
|
case 0x41: // IBM/MS
|
|
case 0x42: // IBM/MS
|
|
case 0x43: // IBM/MS
|
|
case 0x44: // IBM/MS
|
|
case 0x45: // IBM/MS lock/unlock drive
|
|
case 0x46: // IBM/MS eject media
|
|
case 0x47: // IBM/MS extended seek
|
|
case 0x49: // IBM/MS extended media change
|
|
case 0x50: // IBM/MS send packet command
|
|
default:
|
|
BX_INFO("int13_harddisk: unsupported AH=%02x\n", GET_AH());
|
|
|
|
SET_AH(1); // code=invalid function in AH or invalid parameter
|
|
SET_DISK_RET_STATUS(1);
|
|
SET_CF(); /* unsuccessful */
|
|
return;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static char panic_msg_reg12h[] = "HD%d cmos reg 12h not type F\n";
|
|
static char panic_msg_reg19h[] = "HD%d cmos reg %02xh not user definable type 47\n";
|
|
|
|
void
|
|
get_hd_geometry(drive, hd_cylinders, hd_heads, hd_sectors)
|
|
Bit8u drive;
|
|
Bit16u *hd_cylinders;
|
|
Bit8u *hd_heads;
|
|
Bit8u *hd_sectors;
|
|
{
|
|
Bit8u hd_type;
|
|
Bit16u ss;
|
|
Bit16u cylinders;
|
|
Bit8u iobase;
|
|
|
|
ss = get_SS();
|
|
if (drive == 0x80) {
|
|
hd_type = inb_cmos(0x12) & 0xf0;
|
|
if (hd_type != 0xf0)
|
|
BX_INFO(panic_msg_reg12h,0);
|
|
hd_type = inb_cmos(0x19); // HD0: extended type
|
|
if (hd_type != 47)
|
|
BX_INFO(panic_msg_reg19h,0,0x19);
|
|
iobase = 0x1b;
|
|
} else {
|
|
hd_type = inb_cmos(0x12) & 0x0f;
|
|
if (hd_type != 0x0f)
|
|
BX_INFO(panic_msg_reg12h,1);
|
|
hd_type = inb_cmos(0x1a); // HD0: extended type
|
|
if (hd_type != 47)
|
|
BX_INFO(panic_msg_reg19h,0,0x1a);
|
|
iobase = 0x24;
|
|
}
|
|
|
|
// cylinders
|
|
cylinders = inb_cmos(iobase) | (inb_cmos(iobase+1) << 8);
|
|
write_word(ss, hd_cylinders, cylinders);
|
|
|
|
// heads
|
|
write_byte(ss, hd_heads, inb_cmos(iobase+2));
|
|
|
|
// sectors per track
|
|
write_byte(ss, hd_sectors, inb_cmos(iobase+8));
|
|
}
|
|
|
|
#endif //else BX_USE_ATADRV
|
|
|
|
|
|
//////////////////////
|
|
// FLOPPY functions //
|
|
//////////////////////
|
|
|
|
void floppy_reset_controller()
|
|
{
|
|
Bit8u val8;
|
|
|
|
// Reset controller
|
|
val8 = inb(0x03f2);
|
|
outb(0x03f2, val8 & ~0x04);
|
|
outb(0x03f2, val8 | 0x04);
|
|
|
|
// Wait for controller to come out of reset
|
|
do {
|
|
val8 = inb(0x3f4);
|
|
} while ( (val8 & 0xc0) != 0x80 );
|
|
}
|
|
|
|
void floppy_prepare_controller(drive)
|
|
Bit16u drive;
|
|
{
|
|
Bit8u val8, dor, prev_reset;
|
|
|
|
// set 40:3e bit 7 to 0
|
|
val8 = read_byte(0x0040, 0x003e);
|
|
val8 &= 0x7f;
|
|
write_byte(0x0040, 0x003e, val8);
|
|
|
|
// turn on motor of selected drive, DMA & int enabled, normal operation
|
|
prev_reset = inb(0x03f2) & 0x04;
|
|
if (drive)
|
|
dor = 0x20;
|
|
else
|
|
dor = 0x10;
|
|
dor |= 0x0c;
|
|
dor |= drive;
|
|
outb(0x03f2, dor);
|
|
|
|
// reset the disk motor timeout value of INT 08
|
|
write_byte(0x40,0x40, BX_FLOPPY_ON_CNT);
|
|
|
|
// wait for drive readiness
|
|
do {
|
|
val8 = inb(0x3f4);
|
|
} while ( (val8 & 0xc0) != 0x80 );
|
|
|
|
if (prev_reset == 0) {
|
|
// turn on interrupts
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
// wait on 40:3e bit 7 to become 1
|
|
do {
|
|
val8 = read_byte(0x0040, 0x003e);
|
|
} while ( (val8 & 0x80) == 0 );
|
|
val8 &= 0x7f;
|
|
ASM_START
|
|
cli
|
|
ASM_END
|
|
write_byte(0x0040, 0x003e, val8);
|
|
}
|
|
}
|
|
|
|
bx_bool
|
|
floppy_media_known(drive)
|
|
Bit16u drive;
|
|
{
|
|
Bit8u val8;
|
|
Bit16u media_state_offset;
|
|
|
|
val8 = read_byte(0x0040, 0x003e); // diskette recal status
|
|
if (drive)
|
|
val8 >>= 1;
|
|
val8 &= 0x01;
|
|
if (val8 == 0)
|
|
return(0);
|
|
|
|
media_state_offset = 0x0090;
|
|
if (drive)
|
|
media_state_offset += 1;
|
|
|
|
val8 = read_byte(0x0040, media_state_offset);
|
|
val8 = (val8 >> 4) & 0x01;
|
|
if (val8 == 0)
|
|
return(0);
|
|
|
|
// check pass, return KNOWN
|
|
return(1);
|
|
}
|
|
|
|
bx_bool
|
|
floppy_media_sense(drive)
|
|
Bit16u drive;
|
|
{
|
|
bx_bool retval;
|
|
Bit16u media_state_offset;
|
|
Bit8u drive_type, config_data, media_state;
|
|
|
|
if (floppy_drive_recal(drive) == 0) {
|
|
return(0);
|
|
}
|
|
|
|
// for now cheat and get drive type from CMOS,
|
|
// assume media is same as drive type
|
|
|
|
// ** config_data **
|
|
// Bitfields for diskette media control:
|
|
// Bit(s) Description (Table M0028)
|
|
// 7-6 last data rate set by controller
|
|
// 00=500kbps, 01=300kbps, 10=250kbps, 11=1Mbps
|
|
// 5-4 last diskette drive step rate selected
|
|
// 00=0Ch, 01=0Dh, 10=0Eh, 11=0Ah
|
|
// 3-2 {data rate at start of operation}
|
|
// 1-0 reserved
|
|
|
|
// ** media_state **
|
|
// Bitfields for diskette drive media state:
|
|
// Bit(s) Description (Table M0030)
|
|
// 7-6 data rate
|
|
// 00=500kbps, 01=300kbps, 10=250kbps, 11=1Mbps
|
|
// 5 double stepping required (e.g. 360kB in 1.2MB)
|
|
// 4 media type established
|
|
// 3 drive capable of supporting 4MB media
|
|
// 2-0 on exit from BIOS, contains
|
|
// 000 trying 360kB in 360kB
|
|
// 001 trying 360kB in 1.2MB
|
|
// 010 trying 1.2MB in 1.2MB
|
|
// 011 360kB in 360kB established
|
|
// 100 360kB in 1.2MB established
|
|
// 101 1.2MB in 1.2MB established
|
|
// 110 reserved
|
|
// 111 all other formats/drives
|
|
|
|
drive_type = inb_cmos(0x10);
|
|
if (drive == 0)
|
|
drive_type >>= 4;
|
|
else
|
|
drive_type &= 0x0f;
|
|
if ( drive_type == 1 ) {
|
|
// 360K 5.25" drive
|
|
config_data = 0x00; // 0000 0000
|
|
media_state = 0x25; // 0010 0101
|
|
retval = 1;
|
|
}
|
|
else if ( drive_type == 2 ) {
|
|
// 1.2 MB 5.25" drive
|
|
config_data = 0x00; // 0000 0000
|
|
media_state = 0x25; // 0010 0101 // need double stepping??? (bit 5)
|
|
retval = 1;
|
|
}
|
|
else if ( drive_type == 3 ) {
|
|
// 720K 3.5" drive
|
|
config_data = 0x00; // 0000 0000 ???
|
|
media_state = 0x17; // 0001 0111
|
|
retval = 1;
|
|
}
|
|
else if ( drive_type == 4 ) {
|
|
// 1.44 MB 3.5" drive
|
|
config_data = 0x00; // 0000 0000
|
|
media_state = 0x17; // 0001 0111
|
|
retval = 1;
|
|
}
|
|
else if ( drive_type == 5 ) {
|
|
// 2.88 MB 3.5" drive
|
|
config_data = 0xCC; // 1100 1100
|
|
media_state = 0xD7; // 1101 0111
|
|
retval = 1;
|
|
}
|
|
//
|
|
// Extended floppy size uses special cmos setting
|
|
else if ( drive_type == 6 ) {
|
|
// 160k 5.25" drive
|
|
config_data = 0x00; // 0000 0000
|
|
media_state = 0x27; // 0010 0111
|
|
retval = 1;
|
|
}
|
|
else if ( drive_type == 7 ) {
|
|
// 180k 5.25" drive
|
|
config_data = 0x00; // 0000 0000
|
|
media_state = 0x27; // 0010 0111
|
|
retval = 1;
|
|
}
|
|
else if ( drive_type == 8 ) {
|
|
// 320k 5.25" drive
|
|
config_data = 0x00; // 0000 0000
|
|
media_state = 0x27; // 0010 0111
|
|
retval = 1;
|
|
}
|
|
|
|
else {
|
|
// not recognized
|
|
config_data = 0x00; // 0000 0000
|
|
media_state = 0x00; // 0000 0000
|
|
retval = 0;
|
|
}
|
|
|
|
if (drive == 0)
|
|
media_state_offset = 0x90;
|
|
else
|
|
media_state_offset = 0x91;
|
|
write_byte(0x0040, 0x008B, config_data);
|
|
write_byte(0x0040, media_state_offset, media_state);
|
|
|
|
return(retval);
|
|
}
|
|
|
|
bx_bool
|
|
floppy_drive_recal(drive)
|
|
Bit16u drive;
|
|
{
|
|
Bit8u val8;
|
|
Bit16u curr_cyl_offset;
|
|
|
|
floppy_prepare_controller(drive);
|
|
|
|
// send Recalibrate command (2 bytes) to controller
|
|
outb(0x03f5, 0x07); // 07: Recalibrate
|
|
outb(0x03f5, drive); // 0=drive0, 1=drive1
|
|
|
|
// turn on interrupts
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
|
|
// wait on 40:3e bit 7 to become 1
|
|
do {
|
|
val8 = (read_byte(0x0040, 0x003e) & 0x80);
|
|
} while ( val8 == 0 );
|
|
|
|
val8 = 0; // separate asm from while() loop
|
|
// turn off interrupts
|
|
ASM_START
|
|
cli
|
|
ASM_END
|
|
|
|
// set 40:3e bit 7 to 0, and calibrated bit
|
|
val8 = read_byte(0x0040, 0x003e);
|
|
val8 &= 0x7f;
|
|
if (drive) {
|
|
val8 |= 0x02; // Drive 1 calibrated
|
|
curr_cyl_offset = 0x0095;
|
|
} else {
|
|
val8 |= 0x01; // Drive 0 calibrated
|
|
curr_cyl_offset = 0x0094;
|
|
}
|
|
write_byte(0x0040, 0x003e, val8);
|
|
write_byte(0x0040, curr_cyl_offset, 0); // current cylinder is 0
|
|
|
|
return(1);
|
|
}
|
|
|
|
|
|
|
|
bx_bool
|
|
floppy_drive_exists(drive)
|
|
Bit16u drive;
|
|
{
|
|
Bit8u drive_type;
|
|
|
|
// check CMOS to see if drive exists
|
|
drive_type = inb_cmos(0x10);
|
|
if (drive == 0)
|
|
drive_type >>= 4;
|
|
else
|
|
drive_type &= 0x0f;
|
|
if ( drive_type == 0 )
|
|
return(0);
|
|
else
|
|
return(1);
|
|
}
|
|
|
|
#if BX_SUPPORT_FLOPPY
|
|
void
|
|
int13_diskette_function(DS, ES, DI, SI, BP, ELDX, BX, DX, CX, AX, IP, CS, FLAGS)
|
|
Bit16u DS, ES, DI, SI, BP, ELDX, BX, DX, CX, AX, IP, CS, FLAGS;
|
|
{
|
|
Bit8u drive, num_sectors, track, sector, head, status;
|
|
Bit16u base_address, base_count, base_es;
|
|
Bit8u page, mode_register, val8, dor;
|
|
Bit8u return_status[7];
|
|
Bit8u drive_type, num_floppies, ah;
|
|
Bit16u es, last_addr;
|
|
|
|
BX_DEBUG_INT13_FL("int13_diskette: AX=%04x BX=%04x CX=%04x DX=%04x ES=%04x\n", AX, BX, CX, DX, ES);
|
|
|
|
ah = GET_AH();
|
|
|
|
switch ( ah ) {
|
|
case 0x00: // diskette controller reset
|
|
BX_DEBUG_INT13_FL("floppy f00\n");
|
|
drive = GET_ELDL();
|
|
if (drive > 1) {
|
|
SET_AH(1); // invalid param
|
|
set_diskette_ret_status(1);
|
|
SET_CF();
|
|
return;
|
|
}
|
|
drive_type = inb_cmos(0x10);
|
|
|
|
if (drive == 0)
|
|
drive_type >>= 4;
|
|
else
|
|
drive_type &= 0x0f;
|
|
if (drive_type == 0) {
|
|
SET_AH(0x80); // drive not responding
|
|
set_diskette_ret_status(0x80);
|
|
SET_CF();
|
|
return;
|
|
}
|
|
SET_AH(0);
|
|
set_diskette_ret_status(0);
|
|
CLEAR_CF(); // successful
|
|
set_diskette_current_cyl(drive, 0); // current cylinder
|
|
return;
|
|
|
|
case 0x01: // Read Diskette Status
|
|
CLEAR_CF();
|
|
val8 = read_byte(0x0000, 0x0441);
|
|
SET_AH(val8);
|
|
if (val8) {
|
|
SET_CF();
|
|
}
|
|
return;
|
|
|
|
case 0x02: // Read Diskette Sectors
|
|
case 0x03: // Write Diskette Sectors
|
|
case 0x04: // Verify Diskette Sectors
|
|
num_sectors = GET_AL();
|
|
track = GET_CH();
|
|
sector = GET_CL();
|
|
head = GET_DH();
|
|
drive = GET_ELDL();
|
|
|
|
if ( (drive > 1) || (head > 1) ||
|
|
(num_sectors == 0) || (num_sectors > 72) ) {
|
|
BX_INFO("floppy: drive>1 || head>1 ...\n");
|
|
SET_AH(1);
|
|
set_diskette_ret_status(1);
|
|
SET_AL(0); // no sectors read
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
|
|
// see if drive exists
|
|
if (floppy_drive_exists(drive) == 0) {
|
|
SET_AH(0x80); // not responding
|
|
set_diskette_ret_status(0x80);
|
|
SET_AL(0); // no sectors read
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
|
|
// see if media in drive, and type is known
|
|
if (floppy_media_known(drive) == 0) {
|
|
if (floppy_media_sense(drive) == 0) {
|
|
SET_AH(0x0C); // Media type not found
|
|
set_diskette_ret_status(0x0C);
|
|
SET_AL(0); // no sectors read
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (ah == 0x02) {
|
|
// Read Diskette Sectors
|
|
|
|
//-----------------------------------
|
|
// set up DMA controller for transfer
|
|
//-----------------------------------
|
|
|
|
// es:bx = pointer to where to place information from diskette
|
|
// port 04: DMA-1 base and current address, channel 2
|
|
// port 05: DMA-1 base and current count, channel 2
|
|
page = (ES >> 12); // upper 4 bits
|
|
base_es = (ES << 4); // lower 16bits contributed by ES
|
|
base_address = base_es + BX; // lower 16 bits of address
|
|
// contributed by ES:BX
|
|
if ( base_address < base_es ) {
|
|
// in case of carry, adjust page by 1
|
|
page++;
|
|
}
|
|
base_count = (num_sectors * 512) - 1;
|
|
|
|
// check for 64K boundary overrun
|
|
last_addr = base_address + base_count;
|
|
if (last_addr < base_address) {
|
|
SET_AH(0x09);
|
|
set_diskette_ret_status(0x09);
|
|
SET_AL(0); // no sectors read
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
|
|
BX_DEBUG_INT13_FL("masking DMA-1 c2\n");
|
|
outb(0x000a, 0x06);
|
|
|
|
BX_DEBUG_INT13_FL("clear flip-flop\n");
|
|
outb(0x000c, 0x00); // clear flip-flop
|
|
outb(0x0004, base_address);
|
|
outb(0x0004, base_address>>8);
|
|
BX_DEBUG_INT13_FL("clear flip-flop\n");
|
|
outb(0x000c, 0x00); // clear flip-flop
|
|
outb(0x0005, base_count);
|
|
outb(0x0005, base_count>>8);
|
|
|
|
// port 0b: DMA-1 Mode Register
|
|
mode_register = 0x46; // single mode, increment, autoinit disable,
|
|
// transfer type=write, channel 2
|
|
BX_DEBUG_INT13_FL("setting mode register\n");
|
|
outb(0x000b, mode_register);
|
|
|
|
BX_DEBUG_INT13_FL("setting page register\n");
|
|
// port 81: DMA-1 Page Register, channel 2
|
|
outb(0x0081, page);
|
|
|
|
BX_DEBUG_INT13_FL("unmask chan 2\n");
|
|
outb(0x000a, 0x02); // unmask channel 2
|
|
|
|
BX_DEBUG_INT13_FL("unmasking DMA-1 c2\n");
|
|
outb(0x000a, 0x02);
|
|
|
|
//--------------------------------------
|
|
// set up floppy controller for transfer
|
|
//--------------------------------------
|
|
floppy_prepare_controller(drive);
|
|
|
|
// send read-normal-data command (9 bytes) to controller
|
|
outb(0x03f5, 0xe6); // e6: read normal data
|
|
outb(0x03f5, (head << 2) | drive); // HD DR1 DR2
|
|
outb(0x03f5, track);
|
|
outb(0x03f5, head);
|
|
outb(0x03f5, sector);
|
|
outb(0x03f5, 2); // 512 byte sector size
|
|
outb(0x03f5, sector + num_sectors - 1); // last sector to read on track
|
|
outb(0x03f5, 0); // Gap length
|
|
outb(0x03f5, 0xff); // Gap length
|
|
|
|
// turn on interrupts
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
|
|
// wait on 40:3e bit 7 to become 1
|
|
do {
|
|
val8 = read_byte(0x0040, 0x0040);
|
|
if (val8 == 0) {
|
|
floppy_reset_controller();
|
|
SET_AH(0x80); // drive not ready (timeout)
|
|
set_diskette_ret_status(0x80);
|
|
SET_AL(0); // no sectors read
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
val8 = (read_byte(0x0040, 0x003e) & 0x80);
|
|
} while ( val8 == 0 );
|
|
|
|
val8 = 0; // separate asm from while() loop
|
|
// turn off interrupts
|
|
ASM_START
|
|
cli
|
|
ASM_END
|
|
|
|
// set 40:3e bit 7 to 0
|
|
val8 = read_byte(0x0040, 0x003e);
|
|
val8 &= 0x7f;
|
|
write_byte(0x0040, 0x003e, val8);
|
|
|
|
// check port 3f4 for accessibility to status bytes
|
|
val8 = inb(0x3f4);
|
|
if ( (val8 & 0xc0) != 0xc0 )
|
|
BX_PANIC("int13_diskette: ctrl not ready\n");
|
|
|
|
// read 7 return status bytes from controller
|
|
// using loop index broken, have to unroll...
|
|
return_status[0] = inb(0x3f5);
|
|
return_status[1] = inb(0x3f5);
|
|
return_status[2] = inb(0x3f5);
|
|
return_status[3] = inb(0x3f5);
|
|
return_status[4] = inb(0x3f5);
|
|
return_status[5] = inb(0x3f5);
|
|
return_status[6] = inb(0x3f5);
|
|
// record in BIOS Data Area
|
|
write_byte(0x0040, 0x0042, return_status[0]);
|
|
write_byte(0x0040, 0x0043, return_status[1]);
|
|
write_byte(0x0040, 0x0044, return_status[2]);
|
|
write_byte(0x0040, 0x0045, return_status[3]);
|
|
write_byte(0x0040, 0x0046, return_status[4]);
|
|
write_byte(0x0040, 0x0047, return_status[5]);
|
|
write_byte(0x0040, 0x0048, return_status[6]);
|
|
|
|
if ( (return_status[0] & 0xc0) != 0 ) {
|
|
SET_AH(0x20);
|
|
set_diskette_ret_status(0x20);
|
|
SET_AL(0); // no sectors read
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
|
|
// ??? should track be new val from return_status[3] ?
|
|
set_diskette_current_cyl(drive, track);
|
|
// AL = number of sectors read (same value as passed)
|
|
SET_AH(0x00); // success
|
|
CLEAR_CF(); // success
|
|
return;
|
|
} else if (ah == 0x03) {
|
|
// Write Diskette Sectors
|
|
|
|
//-----------------------------------
|
|
// set up DMA controller for transfer
|
|
//-----------------------------------
|
|
|
|
// es:bx = pointer to where to place information from diskette
|
|
// port 04: DMA-1 base and current address, channel 2
|
|
// port 05: DMA-1 base and current count, channel 2
|
|
page = (ES >> 12); // upper 4 bits
|
|
base_es = (ES << 4); // lower 16bits contributed by ES
|
|
base_address = base_es + BX; // lower 16 bits of address
|
|
// contributed by ES:BX
|
|
if ( base_address < base_es ) {
|
|
// in case of carry, adjust page by 1
|
|
page++;
|
|
}
|
|
base_count = (num_sectors * 512) - 1;
|
|
|
|
// check for 64K boundary overrun
|
|
last_addr = base_address + base_count;
|
|
if (last_addr < base_address) {
|
|
SET_AH(0x09);
|
|
set_diskette_ret_status(0x09);
|
|
SET_AL(0); // no sectors read
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
|
|
BX_DEBUG_INT13_FL("masking DMA-1 c2\n");
|
|
outb(0x000a, 0x06);
|
|
|
|
outb(0x000c, 0x00); // clear flip-flop
|
|
outb(0x0004, base_address);
|
|
outb(0x0004, base_address>>8);
|
|
outb(0x000c, 0x00); // clear flip-flop
|
|
outb(0x0005, base_count);
|
|
outb(0x0005, base_count>>8);
|
|
|
|
// port 0b: DMA-1 Mode Register
|
|
mode_register = 0x4a; // single mode, increment, autoinit disable,
|
|
// transfer type=read, channel 2
|
|
outb(0x000b, mode_register);
|
|
|
|
// port 81: DMA-1 Page Register, channel 2
|
|
outb(0x0081, page);
|
|
|
|
BX_DEBUG_INT13_FL("unmasking DMA-1 c2\n");
|
|
outb(0x000a, 0x02);
|
|
|
|
//--------------------------------------
|
|
// set up floppy controller for transfer
|
|
//--------------------------------------
|
|
floppy_prepare_controller(drive);
|
|
|
|
// send write-normal-data command (9 bytes) to controller
|
|
outb(0x03f5, 0xc5); // c5: write normal data
|
|
outb(0x03f5, (head << 2) | drive); // HD DR1 DR2
|
|
outb(0x03f5, track);
|
|
outb(0x03f5, head);
|
|
outb(0x03f5, sector);
|
|
outb(0x03f5, 2); // 512 byte sector size
|
|
outb(0x03f5, sector + num_sectors - 1); // last sector to write on track
|
|
outb(0x03f5, 0); // Gap length
|
|
outb(0x03f5, 0xff); // Gap length
|
|
|
|
// turn on interrupts
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
|
|
// wait on 40:3e bit 7 to become 1
|
|
do {
|
|
val8 = read_byte(0x0040, 0x0040);
|
|
if (val8 == 0) {
|
|
floppy_reset_controller();
|
|
SET_AH(0x80); // drive not ready (timeout)
|
|
set_diskette_ret_status(0x80);
|
|
SET_AL(0); // no sectors written
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
val8 = (read_byte(0x0040, 0x003e) & 0x80);
|
|
} while ( val8 == 0 );
|
|
|
|
val8 = 0; // separate asm from while() loop
|
|
// turn off interrupts
|
|
ASM_START
|
|
cli
|
|
ASM_END
|
|
|
|
// set 40:3e bit 7 to 0
|
|
val8 = read_byte(0x0040, 0x003e);
|
|
val8 &= 0x7f;
|
|
write_byte(0x0040, 0x003e, val8);
|
|
|
|
// check port 3f4 for accessibility to status bytes
|
|
val8 = inb(0x3f4);
|
|
if ( (val8 & 0xc0) != 0xc0 )
|
|
BX_PANIC("int13_diskette: ctrl not ready\n");
|
|
|
|
// read 7 return status bytes from controller
|
|
// using loop index broken, have to unroll...
|
|
return_status[0] = inb(0x3f5);
|
|
return_status[1] = inb(0x3f5);
|
|
return_status[2] = inb(0x3f5);
|
|
return_status[3] = inb(0x3f5);
|
|
return_status[4] = inb(0x3f5);
|
|
return_status[5] = inb(0x3f5);
|
|
return_status[6] = inb(0x3f5);
|
|
// record in BIOS Data Area
|
|
write_byte(0x0040, 0x0042, return_status[0]);
|
|
write_byte(0x0040, 0x0043, return_status[1]);
|
|
write_byte(0x0040, 0x0044, return_status[2]);
|
|
write_byte(0x0040, 0x0045, return_status[3]);
|
|
write_byte(0x0040, 0x0046, return_status[4]);
|
|
write_byte(0x0040, 0x0047, return_status[5]);
|
|
write_byte(0x0040, 0x0048, return_status[6]);
|
|
|
|
if ( (return_status[0] & 0xc0) != 0 ) {
|
|
if ( (return_status[1] & 0x02) != 0 ) {
|
|
// diskette not writable.
|
|
// AH=status code=0x03 (tried to write on write-protected disk)
|
|
// AL=number of sectors written=0
|
|
AX = 0x0300;
|
|
SET_CF();
|
|
return;
|
|
} else {
|
|
BX_PANIC("int13_diskette_function: read error\n");
|
|
}
|
|
}
|
|
|
|
// ??? should track be new val from return_status[3] ?
|
|
set_diskette_current_cyl(drive, track);
|
|
// AL = number of sectors read (same value as passed)
|
|
SET_AH(0x00); // success
|
|
CLEAR_CF(); // success
|
|
return;
|
|
} else { // if (ah == 0x04)
|
|
// Verify Diskette Sectors
|
|
|
|
// ??? should track be new val from return_status[3] ?
|
|
set_diskette_current_cyl(drive, track);
|
|
// AL = number of sectors verified (same value as passed)
|
|
CLEAR_CF(); // success
|
|
SET_AH(0x00); // success
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case 0x05: // format diskette track
|
|
BX_DEBUG_INT13_FL("floppy f05\n");
|
|
|
|
num_sectors = GET_AL();
|
|
track = GET_CH();
|
|
head = GET_DH();
|
|
drive = GET_ELDL();
|
|
|
|
if ((drive > 1) || (head > 1) || (track > 79) ||
|
|
(num_sectors == 0) || (num_sectors > 18)) {
|
|
SET_AH(1);
|
|
set_diskette_ret_status(1);
|
|
SET_CF(); // error occurred
|
|
}
|
|
|
|
// see if drive exists
|
|
if (floppy_drive_exists(drive) == 0) {
|
|
SET_AH(0x80); // drive not responding
|
|
set_diskette_ret_status(0x80);
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
|
|
// see if media in drive, and type is known
|
|
if (floppy_media_known(drive) == 0) {
|
|
if (floppy_media_sense(drive) == 0) {
|
|
SET_AH(0x0C); // Media type not found
|
|
set_diskette_ret_status(0x0C);
|
|
SET_AL(0); // no sectors read
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
}
|
|
|
|
// set up DMA controller for transfer
|
|
page = (ES >> 12); // upper 4 bits
|
|
base_es = (ES << 4); // lower 16bits contributed by ES
|
|
base_address = base_es + BX; // lower 16 bits of address
|
|
// contributed by ES:BX
|
|
if ( base_address < base_es ) {
|
|
// in case of carry, adjust page by 1
|
|
page++;
|
|
}
|
|
base_count = (num_sectors * 4) - 1;
|
|
|
|
// check for 64K boundary overrun
|
|
last_addr = base_address + base_count;
|
|
if (last_addr < base_address) {
|
|
SET_AH(0x09);
|
|
set_diskette_ret_status(0x09);
|
|
SET_AL(0); // no sectors read
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
|
|
outb(0x000a, 0x06);
|
|
outb(0x000c, 0x00); // clear flip-flop
|
|
outb(0x0004, base_address);
|
|
outb(0x0004, base_address>>8);
|
|
outb(0x000c, 0x00); // clear flip-flop
|
|
outb(0x0005, base_count);
|
|
outb(0x0005, base_count>>8);
|
|
mode_register = 0x4a; // single mode, increment, autoinit disable,
|
|
// transfer type=read, channel 2
|
|
outb(0x000b, mode_register);
|
|
// port 81: DMA-1 Page Register, channel 2
|
|
outb(0x0081, page);
|
|
outb(0x000a, 0x02);
|
|
|
|
// set up floppy controller for transfer
|
|
floppy_prepare_controller(drive);
|
|
|
|
// send format-track command (6 bytes) to controller
|
|
outb(0x03f5, 0x4d); // 4d: format track
|
|
outb(0x03f5, (head << 2) | drive); // HD DR1 DR2
|
|
outb(0x03f5, 2); // 512 byte sector size
|
|
outb(0x03f5, num_sectors); // number of sectors per track
|
|
outb(0x03f5, 0); // Gap length
|
|
outb(0x03f5, 0xf6); // Fill byte
|
|
// turn on interrupts
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
|
|
// wait on 40:3e bit 7 to become 1
|
|
do {
|
|
val8 = read_byte(0x0040, 0x0040);
|
|
if (val8 == 0) {
|
|
floppy_reset_controller();
|
|
SET_AH(0x80); // drive not ready (timeout)
|
|
set_diskette_ret_status(0x80);
|
|
SET_CF(); // error occurred
|
|
return;
|
|
}
|
|
val8 = (read_byte(0x0040, 0x003e) & 0x80);
|
|
} while ( val8 == 0 );
|
|
|
|
val8 = 0; // separate asm from while() loop
|
|
// turn off interrupts
|
|
ASM_START
|
|
cli
|
|
ASM_END
|
|
// set 40:3e bit 7 to 0
|
|
val8 = read_byte(0x0040, 0x003e);
|
|
val8 &= 0x7f;
|
|
write_byte(0x0040, 0x003e, val8);
|
|
// check port 3f4 for accessibility to status bytes
|
|
val8 = inb(0x3f4);
|
|
if ( (val8 & 0xc0) != 0xc0 )
|
|
BX_PANIC("int13_diskette: ctrl not ready\n");
|
|
|
|
// read 7 return status bytes from controller
|
|
// using loop index broken, have to unroll...
|
|
return_status[0] = inb(0x3f5);
|
|
return_status[1] = inb(0x3f5);
|
|
return_status[2] = inb(0x3f5);
|
|
return_status[3] = inb(0x3f5);
|
|
return_status[4] = inb(0x3f5);
|
|
return_status[5] = inb(0x3f5);
|
|
return_status[6] = inb(0x3f5);
|
|
// record in BIOS Data Area
|
|
write_byte(0x0040, 0x0042, return_status[0]);
|
|
write_byte(0x0040, 0x0043, return_status[1]);
|
|
write_byte(0x0040, 0x0044, return_status[2]);
|
|
write_byte(0x0040, 0x0045, return_status[3]);
|
|
write_byte(0x0040, 0x0046, return_status[4]);
|
|
write_byte(0x0040, 0x0047, return_status[5]);
|
|
write_byte(0x0040, 0x0048, return_status[6]);
|
|
|
|
if ( (return_status[0] & 0xc0) != 0 ) {
|
|
if ( (return_status[1] & 0x02) != 0 ) {
|
|
// diskette not writable.
|
|
// AH=status code=0x03 (tried to write on write-protected disk)
|
|
// AL=number of sectors written=0
|
|
AX = 0x0300;
|
|
SET_CF();
|
|
return;
|
|
} else {
|
|
BX_PANIC("int13_diskette_function: write error\n");
|
|
}
|
|
}
|
|
|
|
SET_AH(0);
|
|
set_diskette_ret_status(0);
|
|
set_diskette_current_cyl(drive, 0);
|
|
CLEAR_CF(); // successful
|
|
return;
|
|
|
|
|
|
case 0x08: // read diskette drive parameters
|
|
BX_DEBUG_INT13_FL("floppy f08\n");
|
|
drive = GET_ELDL();
|
|
|
|
if (drive > 1) {
|
|
AX = 0;
|
|
BX = 0;
|
|
CX = 0;
|
|
DX = 0;
|
|
ES = 0;
|
|
DI = 0;
|
|
SET_DL(num_floppies);
|
|
SET_CF();
|
|
return;
|
|
}
|
|
|
|
drive_type = inb_cmos(0x10);
|
|
num_floppies = 0;
|
|
if (drive_type & 0xf0)
|
|
num_floppies++;
|
|
if (drive_type & 0x0f)
|
|
num_floppies++;
|
|
|
|
if (drive == 0)
|
|
drive_type >>= 4;
|
|
else
|
|
drive_type &= 0x0f;
|
|
|
|
SET_BH(0);
|
|
SET_BL(drive_type);
|
|
SET_AH(0);
|
|
SET_AL(0);
|
|
SET_DL(num_floppies);
|
|
|
|
switch (drive_type) {
|
|
case 0: // none
|
|
CX = 0;
|
|
SET_DH(0); // max head #
|
|
break;
|
|
|
|
case 1: // 360KB, 5.25"
|
|
CX = 0x2709; // 40 tracks, 9 sectors
|
|
SET_DH(1); // max head #
|
|
break;
|
|
|
|
case 2: // 1.2MB, 5.25"
|
|
CX = 0x4f0f; // 80 tracks, 15 sectors
|
|
SET_DH(1); // max head #
|
|
break;
|
|
|
|
case 3: // 720KB, 3.5"
|
|
CX = 0x4f09; // 80 tracks, 9 sectors
|
|
SET_DH(1); // max head #
|
|
break;
|
|
|
|
case 4: // 1.44MB, 3.5"
|
|
CX = 0x4f12; // 80 tracks, 18 sectors
|
|
SET_DH(1); // max head #
|
|
break;
|
|
|
|
case 5: // 2.88MB, 3.5"
|
|
CX = 0x4f24; // 80 tracks, 36 sectors
|
|
SET_DH(1); // max head #
|
|
break;
|
|
|
|
case 6: // 160k, 5.25"
|
|
CX = 0x2708; // 40 tracks, 8 sectors
|
|
SET_DH(0); // max head #
|
|
break;
|
|
|
|
case 7: // 180k, 5.25"
|
|
CX = 0x2709; // 40 tracks, 9 sectors
|
|
SET_DH(0); // max head #
|
|
break;
|
|
|
|
case 8: // 320k, 5.25"
|
|
CX = 0x2708; // 40 tracks, 8 sectors
|
|
SET_DH(1); // max head #
|
|
break;
|
|
|
|
default: // ?
|
|
BX_PANIC("floppy: int13: bad floppy type\n");
|
|
}
|
|
|
|
/* set es & di to point to 11 byte diskette param table in ROM */
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
mov ax, #diskette_param_table2
|
|
mov _int13_diskette_function.DI+2[bp], ax
|
|
mov _int13_diskette_function.ES+2[bp], cs
|
|
pop bp
|
|
ASM_END
|
|
CLEAR_CF(); // success
|
|
/* disk status not changed upon success */
|
|
return;
|
|
|
|
|
|
case 0x15: // read diskette drive type
|
|
BX_DEBUG_INT13_FL("floppy f15\n");
|
|
drive = GET_ELDL();
|
|
if (drive > 1) {
|
|
SET_AH(0); // only 2 drives supported
|
|
// set_diskette_ret_status here ???
|
|
SET_CF();
|
|
return;
|
|
}
|
|
drive_type = inb_cmos(0x10);
|
|
|
|
if (drive == 0)
|
|
drive_type >>= 4;
|
|
else
|
|
drive_type &= 0x0f;
|
|
CLEAR_CF(); // successful, not present
|
|
if (drive_type==0) {
|
|
SET_AH(0); // drive not present
|
|
}
|
|
else {
|
|
SET_AH(1); // drive present, does not support change line
|
|
}
|
|
|
|
return;
|
|
|
|
case 0x16: // get diskette change line status
|
|
BX_DEBUG_INT13_FL("floppy f16\n");
|
|
drive = GET_ELDL();
|
|
if (drive > 1) {
|
|
SET_AH(0x01); // invalid drive
|
|
set_diskette_ret_status(0x01);
|
|
SET_CF();
|
|
return;
|
|
}
|
|
|
|
SET_AH(0x06); // change line not supported
|
|
set_diskette_ret_status(0x06);
|
|
SET_CF();
|
|
return;
|
|
|
|
case 0x17: // set diskette type for format(old)
|
|
BX_DEBUG_INT13_FL("floppy f17\n");
|
|
/* not used for 1.44M floppies */
|
|
SET_AH(0x01); // not supported
|
|
set_diskette_ret_status(1); /* not supported */
|
|
SET_CF();
|
|
return;
|
|
|
|
case 0x18: // set diskette type for format(new)
|
|
BX_DEBUG_INT13_FL("floppy f18\n");
|
|
SET_AH(0x01); // do later
|
|
set_diskette_ret_status(1);
|
|
SET_CF();
|
|
return;
|
|
|
|
default:
|
|
BX_INFO("int13_diskette: unsupported AH=%02x\n", GET_AH());
|
|
|
|
// if ( (ah==0x20) || ((ah>=0x41) && (ah<=0x49)) || (ah==0x4e) ) {
|
|
SET_AH(0x01); // ???
|
|
set_diskette_ret_status(1);
|
|
SET_CF();
|
|
return;
|
|
// }
|
|
}
|
|
}
|
|
#else // #if BX_SUPPORT_FLOPPY
|
|
void
|
|
int13_diskette_function(DS, ES, DI, SI, BP, ELDX, BX, DX, CX, AX, IP, CS, FLAGS)
|
|
Bit16u DS, ES, DI, SI, BP, ELDX, BX, DX, CX, AX, IP, CS, FLAGS;
|
|
{
|
|
Bit8u val8;
|
|
|
|
switch ( GET_AH() ) {
|
|
|
|
case 0x01: // Read Diskette Status
|
|
CLEAR_CF();
|
|
val8 = read_byte(0x0000, 0x0441);
|
|
SET_AH(val8);
|
|
if (val8) {
|
|
SET_CF();
|
|
}
|
|
return;
|
|
|
|
default:
|
|
SET_CF();
|
|
write_byte(0x0000, 0x0441, 0x01);
|
|
SET_AH(0x01);
|
|
}
|
|
}
|
|
#endif // #if BX_SUPPORT_FLOPPY
|
|
|
|
void
|
|
set_diskette_ret_status(value)
|
|
Bit8u value;
|
|
{
|
|
write_byte(0x0040, 0x0041, value);
|
|
}
|
|
|
|
void
|
|
set_diskette_current_cyl(drive, cyl)
|
|
Bit8u drive;
|
|
Bit8u cyl;
|
|
{
|
|
if (drive > 1)
|
|
BX_PANIC("set_diskette_current_cyl(): drive > 1\n");
|
|
write_byte(0x0040, 0x0094+drive, cyl);
|
|
}
|
|
|
|
void
|
|
determine_floppy_media(drive)
|
|
Bit16u drive;
|
|
{
|
|
#if 0
|
|
Bit8u val8, DOR, ctrl_info;
|
|
|
|
ctrl_info = read_byte(0x0040, 0x008F);
|
|
if (drive==1)
|
|
ctrl_info >>= 4;
|
|
else
|
|
ctrl_info &= 0x0f;
|
|
|
|
#if 0
|
|
if (drive == 0) {
|
|
DOR = 0x1c; // DOR: drive0 motor on, DMA&int enabled, normal op, drive select 0
|
|
}
|
|
else {
|
|
DOR = 0x2d; // DOR: drive1 motor on, DMA&int enabled, normal op, drive select 1
|
|
}
|
|
#endif
|
|
|
|
if ( (ctrl_info & 0x04) != 0x04 ) {
|
|
// Drive not determined means no drive exists, done.
|
|
return;
|
|
}
|
|
|
|
#if 0
|
|
// check Main Status Register for readiness
|
|
val8 = inb(0x03f4) & 0x80; // Main Status Register
|
|
if (val8 != 0x80)
|
|
BX_PANIC("d_f_m: MRQ bit not set\n");
|
|
|
|
// change line
|
|
|
|
// existing BDA values
|
|
|
|
// turn on drive motor
|
|
outb(0x03f2, DOR); // Digital Output Register
|
|
//
|
|
#endif
|
|
BX_PANIC("d_f_m: OK so far\n");
|
|
#endif
|
|
}
|
|
|
|
void
|
|
int17_function(regs, ds, iret_addr)
|
|
pusha_regs_t regs; // regs pushed from PUSHA instruction
|
|
Bit16u ds; // previous DS:, DS set to 0x0000 by asm wrapper
|
|
iret_addr_t iret_addr; // CS,IP,Flags pushed from original INT call
|
|
{
|
|
Bit16u addr,timeout;
|
|
Bit8u val8;
|
|
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
|
|
addr = read_word(0x0040, (regs.u.r16.dx << 1) + 8);
|
|
if ((regs.u.r8.ah < 3) && (regs.u.r16.dx < 3) && (addr > 0)) {
|
|
timeout = read_byte(0x0040, 0x0078 + regs.u.r16.dx) << 8;
|
|
if (regs.u.r8.ah == 0) {
|
|
outb(addr, regs.u.r8.al);
|
|
val8 = inb(addr+2);
|
|
outb(addr+2, val8 | 0x01); // send strobe
|
|
ASM_START
|
|
nop
|
|
ASM_END
|
|
outb(addr+2, val8 & ~0x01);
|
|
while (((inb(addr+1) & 0x40) == 0x40) && (timeout)) {
|
|
timeout--;
|
|
}
|
|
}
|
|
if (regs.u.r8.ah == 1) {
|
|
val8 = inb(addr+2);
|
|
outb(addr+2, val8 & ~0x04); // send init
|
|
ASM_START
|
|
nop
|
|
ASM_END
|
|
outb(addr+2, val8 | 0x04);
|
|
}
|
|
val8 = inb(addr+1);
|
|
regs.u.r8.ah = (val8 ^ 0x48);
|
|
if (!timeout) regs.u.r8.ah |= 0x01;
|
|
ClearCF(iret_addr.flags);
|
|
} else {
|
|
SetCF(iret_addr.flags); // Unsupported
|
|
}
|
|
}
|
|
|
|
// returns bootsegment in ax, drive in bl
|
|
Bit32u
|
|
int19_function(bseqnr)
|
|
Bit8u bseqnr;
|
|
{
|
|
Bit16u ebda_seg=read_word(0x0040,0x000E);
|
|
Bit16u bootseq;
|
|
Bit8u bootdrv;
|
|
Bit8u bootcd;
|
|
Bit8u bootchk;
|
|
Bit16u bootseg;
|
|
Bit16u status;
|
|
Bit8u lastdrive=0;
|
|
|
|
// if BX_ELTORITO_BOOT is not defined, old behavior
|
|
// check bit 5 in CMOS reg 0x2d. load either 0x00 or 0x80 into DL
|
|
// in preparation for the intial INT 13h (0=floppy A:, 0x80=C:)
|
|
// 0: system boot sequence, first drive C: then A:
|
|
// 1: system boot sequence, first drive A: then C:
|
|
// else BX_ELTORITO_BOOT is defined
|
|
// CMOS regs 0x3D and 0x38 contain the boot sequence:
|
|
// CMOS reg 0x3D & 0x0f : 1st boot device
|
|
// CMOS reg 0x3D & 0xf0 : 2nd boot device
|
|
// CMOS reg 0x38 & 0xf0 : 3rd boot device
|
|
// boot device codes:
|
|
// 0x00 : not defined
|
|
// 0x01 : first floppy
|
|
// 0x02 : first harddrive
|
|
// 0x03 : first cdrom
|
|
// else : boot failure
|
|
|
|
// Get the boot sequence
|
|
#if BX_ELTORITO_BOOT
|
|
bootseq=inb_cmos(0x3d);
|
|
bootseq|=((inb_cmos(0x38) & 0xf0) << 4);
|
|
|
|
if (bseqnr==2) bootseq >>= 4;
|
|
if (bseqnr==3) bootseq >>= 8;
|
|
if (bootseq<0x10) lastdrive = 1;
|
|
bootdrv=0x00; bootcd=0;
|
|
switch(bootseq & 0x0f) {
|
|
case 0x01: bootdrv=0x00; bootcd=0; break;
|
|
case 0x02: bootdrv=0x80; bootcd=0; break;
|
|
case 0x03: bootdrv=0x00; bootcd=1; break;
|
|
default: return 0x00000000;
|
|
}
|
|
#else
|
|
bootseq=inb_cmos(0x2d);
|
|
|
|
if (bseqnr==2) {
|
|
bootseq ^= 0x20;
|
|
lastdrive = 1;
|
|
}
|
|
bootdrv=0x00; bootcd=0;
|
|
if((bootseq&0x20)==0) bootdrv=0x80;
|
|
#endif // BX_ELTORITO_BOOT
|
|
|
|
#if BX_ELTORITO_BOOT
|
|
// We have to boot from cd
|
|
if (bootcd != 0) {
|
|
status = cdrom_boot();
|
|
|
|
// If failure
|
|
if ( (status & 0x00ff) !=0 ) {
|
|
print_cdromboot_failure(status);
|
|
print_boot_failure(bootcd, bootdrv, 1, lastdrive);
|
|
return 0x00000000;
|
|
}
|
|
|
|
bootseg = read_word(ebda_seg,&EbdaData->cdemu.load_segment);
|
|
bootdrv = (Bit8u)(status>>8);
|
|
}
|
|
|
|
#endif // BX_ELTORITO_BOOT
|
|
|
|
// We have to boot from harddisk or floppy
|
|
if (bootcd == 0) {
|
|
bootseg=0x07c0;
|
|
|
|
ASM_START
|
|
push bp
|
|
mov bp, sp
|
|
|
|
xor ax, ax
|
|
mov _int19_function.status + 2[bp], ax
|
|
mov dl, _int19_function.bootdrv + 2[bp]
|
|
mov ax, _int19_function.bootseg + 2[bp]
|
|
mov es, ax ;; segment
|
|
xor bx, bx ;; offset
|
|
mov ah, #0x02 ;; function 2, read diskette sector
|
|
mov al, #0x01 ;; read 1 sector
|
|
mov ch, #0x00 ;; track 0
|
|
mov cl, #0x01 ;; sector 1
|
|
mov dh, #0x00 ;; head 0
|
|
int #0x13 ;; read sector
|
|
jnc int19_load_done
|
|
mov ax, #0x0001
|
|
mov _int19_function.status + 2[bp], ax
|
|
|
|
int19_load_done:
|
|
pop bp
|
|
ASM_END
|
|
|
|
if (status != 0) {
|
|
print_boot_failure(bootcd, bootdrv, 1, lastdrive);
|
|
return 0x00000000;
|
|
}
|
|
}
|
|
|
|
// check signature if instructed by cmos reg 0x38, only for floppy
|
|
// bootchk = 1 : signature check disabled
|
|
// bootchk = 0 : signature check enabled
|
|
if (bootdrv != 0) bootchk = 0;
|
|
else bootchk = inb_cmos(0x38) & 0x01;
|
|
|
|
#if BX_ELTORITO_BOOT
|
|
// if boot from cd, no signature check
|
|
if (bootcd != 0)
|
|
bootchk = 1;
|
|
#endif // BX_ELTORITO_BOOT
|
|
|
|
if (bootchk == 0) {
|
|
if (read_word(bootseg,0x1fe) != 0xaa55) {
|
|
print_boot_failure(bootcd, bootdrv, 0, lastdrive);
|
|
return 0x00000000;
|
|
}
|
|
}
|
|
|
|
#if BX_ELTORITO_BOOT
|
|
// Print out the boot string
|
|
print_boot_device(bootcd, bootdrv);
|
|
#else // BX_ELTORITO_BOOT
|
|
print_boot_device(0, bootdrv);
|
|
#endif // BX_ELTORITO_BOOT
|
|
|
|
// return the boot segment
|
|
return (((Bit32u)bootdrv) << 16) + bootseg;
|
|
}
|
|
|
|
void
|
|
int1a_function(regs, ds, iret_addr)
|
|
pusha_regs_t regs; // regs pushed from PUSHA instruction
|
|
Bit16u ds; // previous DS:, DS set to 0x0000 by asm wrapper
|
|
iret_addr_t iret_addr; // CS,IP,Flags pushed from original INT call
|
|
{
|
|
Bit8u val8;
|
|
|
|
BX_DEBUG_INT1A("int1a: AX=%04x BX=%04x CX=%04x DX=%04x DS=%04x\n", regs.u.r16.ax, regs.u.r16.bx, regs.u.r16.cx, regs.u.r16.dx, ds);
|
|
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
|
|
switch (regs.u.r8.ah) {
|
|
case 0: // get current clock count
|
|
ASM_START
|
|
cli
|
|
ASM_END
|
|
regs.u.r16.cx = BiosData->ticks_high;
|
|
regs.u.r16.dx = BiosData->ticks_low;
|
|
regs.u.r8.al = BiosData->midnight_flag;
|
|
BiosData->midnight_flag = 0; // reset flag
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
// AH already 0
|
|
ClearCF(iret_addr.flags); // OK
|
|
break;
|
|
|
|
case 1: // Set Current Clock Count
|
|
ASM_START
|
|
cli
|
|
ASM_END
|
|
BiosData->ticks_high = regs.u.r16.cx;
|
|
BiosData->ticks_low = regs.u.r16.dx;
|
|
BiosData->midnight_flag = 0; // reset flag
|
|
ASM_START
|
|
sti
|
|
ASM_END
|
|
regs.u.r8.ah = 0;
|
|
ClearCF(iret_addr.flags); // OK
|
|
break;
|
|
|
|
|
|
case 2: // Read CMOS Time
|
|
if (rtc_updating()) {
|
|
SetCF(iret_addr.flags);
|
|
break;
|
|
}
|
|
|
|
regs.u.r8.dh = inb_cmos(0x00); // Seconds
|
|
regs.u.r8.cl = inb_cmos(0x02); // Minutes
|
|
regs.u.r8.ch = inb_cmos(0x04); // Hours
|
|
regs.u.r8.dl = inb_cmos(0x0b) & 0x01; // Stat Reg B
|
|
regs.u.r8.ah = 0;
|
|
regs.u.r8.al = regs.u.r8.ch;
|
|
ClearCF(iret_addr.flags); // OK
|
|
break;
|
|
|
|
case 3: // Set CMOS Time
|
|
// Using a debugger, I notice the following masking/setting
|
|
// of bits in Status Register B, by setting Reg B to
|
|
// a few values and getting its value after INT 1A was called.
|
|
//
|
|
// try#1 try#2 try#3
|
|
// before 1111 1101 0111 1101 0000 0000
|
|
// after 0110 0010 0110 0010 0000 0010
|
|
//
|
|
// Bit4 in try#1 flipped in hardware (forced low) due to bit7=1
|
|
// My assumption: RegB = ((RegB & 01100000b) | 00000010b)
|
|
if (rtc_updating()) {
|
|
init_rtc();
|
|
// fall through as if an update were not in progress
|
|
}
|
|
outb_cmos(0x00, regs.u.r8.dh); // Seconds
|
|
outb_cmos(0x02, regs.u.r8.cl); // Minutes
|
|
outb_cmos(0x04, regs.u.r8.ch); // Hours
|
|
// Set Daylight Savings time enabled bit to requested value
|
|
val8 = (inb_cmos(0x0b) & 0x60) | 0x02 | (regs.u.r8.dl & 0x01);
|
|
// (reg B already selected)
|
|
outb_cmos(0x0b, val8);
|
|
regs.u.r8.ah = 0;
|
|
regs.u.r8.al = val8; // val last written to Reg B
|
|
ClearCF(iret_addr.flags); // OK
|
|
break;
|
|
|
|
case 4: // Read CMOS Date
|
|
regs.u.r8.ah = 0;
|
|
if (rtc_updating()) {
|
|
SetCF(iret_addr.flags);
|
|
break;
|
|
}
|
|
regs.u.r8.cl = inb_cmos(0x09); // Year
|
|
regs.u.r8.dh = inb_cmos(0x08); // Month
|
|
regs.u.r8.dl = inb_cmos(0x07); // Day of Month
|
|
regs.u.r8.ch = inb_cmos(0x32); // Century
|
|
regs.u.r8.al = regs.u.r8.ch;
|
|
ClearCF(iret_addr.flags); // OK
|
|
break;
|
|
|
|
case 5: // Set CMOS Date
|
|
// Using a debugger, I notice the following masking/setting
|
|
// of bits in Status Register B, by setting Reg B to
|
|
// a few values and getting its value after INT 1A was called.
|
|
//
|
|
// try#1 try#2 try#3 try#4
|
|
// before 1111 1101 0111 1101 0000 0010 0000 0000
|
|
// after 0110 1101 0111 1101 0000 0010 0000 0000
|
|
//
|
|
// Bit4 in try#1 flipped in hardware (forced low) due to bit7=1
|
|
// My assumption: RegB = (RegB & 01111111b)
|
|
if (rtc_updating()) {
|
|
init_rtc();
|
|
SetCF(iret_addr.flags);
|
|
break;
|
|
}
|
|
outb_cmos(0x09, regs.u.r8.cl); // Year
|
|
outb_cmos(0x08, regs.u.r8.dh); // Month
|
|
outb_cmos(0x07, regs.u.r8.dl); // Day of Month
|
|
outb_cmos(0x32, regs.u.r8.ch); // Century
|
|
val8 = inb_cmos(0x0b) & 0x7f; // clear halt-clock bit
|
|
outb_cmos(0x0b, val8);
|
|
regs.u.r8.ah = 0;
|
|
regs.u.r8.al = val8; // AL = val last written to Reg B
|
|
ClearCF(iret_addr.flags); // OK
|
|
break;
|
|
|
|
case 6: // Set Alarm Time in CMOS
|
|
// Using a debugger, I notice the following masking/setting
|
|
// of bits in Status Register B, by setting Reg B to
|
|
// a few values and getting its value after INT 1A was called.
|
|
//
|
|
// try#1 try#2 try#3
|
|
// before 1101 1111 0101 1111 0000 0000
|
|
// after 0110 1111 0111 1111 0010 0000
|
|
//
|
|
// Bit4 in try#1 flipped in hardware (forced low) due to bit7=1
|
|
// My assumption: RegB = ((RegB & 01111111b) | 00100000b)
|
|
val8 = inb_cmos(0x0b); // Get Status Reg B
|
|
regs.u.r16.ax = 0;
|
|
if (val8 & 0x20) {
|
|
// Alarm interrupt enabled already
|
|
SetCF(iret_addr.flags); // Error: alarm in use
|
|
break;
|
|
}
|
|
if (rtc_updating()) {
|
|
init_rtc();
|
|
// fall through as if an update were not in progress
|
|
}
|
|
outb_cmos(0x01, regs.u.r8.dh); // Seconds alarm
|
|
outb_cmos(0x03, regs.u.r8.cl); // Minutes alarm
|
|
outb_cmos(0x05, regs.u.r8.ch); // Hours alarm
|
|
outb(0xa1, inb(0xa1) & 0xfe); // enable IRQ 8
|
|
// enable Status Reg B alarm bit, clear halt clock bit
|
|
outb_cmos(0x0b, (val8 & 0x7f) | 0x20);
|
|
ClearCF(iret_addr.flags); // OK
|
|
break;
|
|
|
|
case 7: // Turn off Alarm
|
|
// Using a debugger, I notice the following masking/setting
|
|
// of bits in Status Register B, by setting Reg B to
|
|
// a few values and getting its value after INT 1A was called.
|
|
//
|
|
// try#1 try#2 try#3 try#4
|
|
// before 1111 1101 0111 1101 0010 0000 0010 0010
|
|
// after 0100 0101 0101 0101 0000 0000 0000 0010
|
|
//
|
|
// Bit4 in try#1 flipped in hardware (forced low) due to bit7=1
|
|
// My assumption: RegB = (RegB & 01010111b)
|
|
val8 = inb_cmos(0x0b); // Get Status Reg B
|
|
// clear clock-halt bit, disable alarm bit
|
|
outb_cmos(0x0b, val8 & 0x57); // disable alarm bit
|
|
regs.u.r8.ah = 0;
|
|
regs.u.r8.al = val8; // val last written to Reg B
|
|
ClearCF(iret_addr.flags); // OK
|
|
break;
|
|
#if BX_PCIBIOS
|
|
case 0xb1:
|
|
// real mode PCI BIOS functions now handled in assembler code
|
|
// this C code handles the error code for information only
|
|
if (regs.u.r8.bl == 0xff) {
|
|
BX_INFO("PCI BIOS: PCI not present\n");
|
|
} else if (regs.u.r8.bl == 0x81) {
|
|
BX_INFO("unsupported PCI BIOS function 0x%02x\n", regs.u.r8.al);
|
|
} else if (regs.u.r8.bl == 0x83) {
|
|
BX_INFO("bad PCI vendor ID %04x\n", regs.u.r16.dx);
|
|
} else if (regs.u.r8.bl == 0x86) {
|
|
if (regs.u.r8.al == 0x02) {
|
|
BX_INFO("PCI device %04x:%04x not found at index %d\n", regs.u.r16.dx, regs.u.r16.cx, regs.u.r16.si);
|
|
} else {
|
|
BX_INFO("no PCI device with class code 0x%02x%04x found at index %d\n", regs.u.r8.cl, regs.u.r16.dx, regs.u.r16.si);
|
|
}
|
|
}
|
|
regs.u.r8.ah = regs.u.r8.bl;
|
|
SetCF(iret_addr.flags);
|
|
break;
|
|
#endif
|
|
|
|
default:
|
|
SetCF(iret_addr.flags); // Unsupported
|
|
}
|
|
}
|
|
|
|
void
|
|
int70_function(regs, ds, iret_addr)
|
|
pusha_regs_t regs; // regs pushed from PUSHA instruction
|
|
Bit16u ds; // previous DS:, DS set to 0x0000 by asm wrapper
|
|
iret_addr_t iret_addr; // CS,IP,Flags pushed from original INT call
|
|
{
|
|
// INT 70h: IRQ 8 - CMOS RTC interrupt from periodic or alarm modes
|
|
Bit8u registerB = 0, registerC = 0;
|
|
|
|
// Check which modes are enabled and have occurred.
|
|
registerB = inb_cmos( 0xB );
|
|
registerC = inb_cmos( 0xC );
|
|
|
|
if( ( registerB & 0x60 ) != 0 ) {
|
|
if( ( registerC & 0x20 ) != 0 ) {
|
|
// Handle Alarm Interrupt.
|
|
ASM_START
|
|
sti
|
|
int #0x4a
|
|
cli
|
|
ASM_END
|
|
}
|
|
if( ( registerC & 0x40 ) != 0 ) {
|
|
// Handle Periodic Interrupt.
|
|
|
|
if( read_byte( 0x40, 0xA0 ) != 0 ) {
|
|
// Wait Interval (Int 15, AH=83) active.
|
|
Bit32u time, toggle;
|
|
|
|
time = read_dword( 0x40, 0x9C ); // Time left in microseconds.
|
|
if( time < 0x3D1 ) {
|
|
// Done waiting.
|
|
Bit16u segment, offset;
|
|
|
|
segment = read_word( 0x40, 0x98 );
|
|
offset = read_word( 0x40, 0x9A );
|
|
write_byte( 0x40, 0xA0, 0 ); // Turn of status byte.
|
|
outb_cmos( 0xB, registerB & 0x37 ); // Clear the Periodic Interrupt.
|
|
write_byte(segment, offset, read_byte(segment, offset) | 0x80 ); // Write to specified flag byte.
|
|
} else {
|
|
// Continue waiting.
|
|
time -= 0x3D1;
|
|
write_dword( 0x40, 0x9C, time );
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
ASM_START
|
|
call eoi_both_pics
|
|
ASM_END
|
|
}
|
|
|
|
|
|
ASM_START
|
|
;------------------------------------------
|
|
;- INT74h : PS/2 mouse hardware interrupt -
|
|
;------------------------------------------
|
|
int74_handler:
|
|
sti
|
|
pusha
|
|
push ds ;; save DS
|
|
push #0x00 ;; placeholder for status
|
|
push #0x00 ;; placeholder for X
|
|
push #0x00 ;; placeholder for Y
|
|
push #0x00 ;; placeholder for Z
|
|
push #0x00 ;; placeholder for make_far_call boolean
|
|
call _int74_function
|
|
pop cx ;; remove make_far_call from stack
|
|
jcxz int74_done
|
|
|
|
;; make far call to EBDA:0022
|
|
push #0x00
|
|
pop ds
|
|
push 0x040E ;; push 0000:040E (opcodes 0xff, 0x36, 0x0E, 0x04)
|
|
pop ds
|
|
//CALL_EP(0x0022) ;; call far routine (call_Ep DS:0022 :opcodes 0xff, 0x1e, 0x22, 0x00)
|
|
call far ptr[0x22]
|
|
int74_done:
|
|
cli
|
|
call eoi_both_pics
|
|
add sp, #8 ;; pop status, x, y, z
|
|
|
|
pop ds ;; restore DS
|
|
popa
|
|
iret
|
|
|
|
|
|
;; This will perform an IRET, but will retain value of current CF
|
|
;; by altering flags on stack. Better than RETF #02.
|
|
iret_modify_cf:
|
|
jc carry_set
|
|
push bp
|
|
mov bp, sp
|
|
and BYTE [bp + 0x06], #0xfe
|
|
pop bp
|
|
iret
|
|
carry_set:
|
|
push bp
|
|
mov bp, sp
|
|
or BYTE [bp + 0x06], #0x01
|
|
pop bp
|
|
iret
|
|
|
|
|
|
;----------------------
|
|
;- INT13h (relocated) -
|
|
;----------------------
|
|
;
|
|
; int13_relocated is a little bit messed up since I played with it
|
|
; I have to rewrite it:
|
|
; - call a function that detect which function to call
|
|
; - make all called C function get the same parameters list
|
|
;
|
|
int13_relocated:
|
|
|
|
#if BX_ELTORITO_BOOT
|
|
;; check for an eltorito function
|
|
cmp ah,#0x4a
|
|
jb int13_not_eltorito
|
|
cmp ah,#0x4d
|
|
ja int13_not_eltorito
|
|
|
|
pusha
|
|
push es
|
|
push ds
|
|
push ss
|
|
pop ds
|
|
|
|
push #int13_out
|
|
jmp _int13_eltorito ;; ELDX not used
|
|
|
|
int13_not_eltorito:
|
|
push ax
|
|
push bx
|
|
push cx
|
|
push dx
|
|
|
|
;; check if emulation active
|
|
call _cdemu_isactive
|
|
cmp al,#0x00
|
|
je int13_cdemu_inactive
|
|
|
|
;; check if access to the emulated drive
|
|
call _cdemu_emulated_drive
|
|
pop dx
|
|
push dx
|
|
cmp al,dl ;; int13 on emulated drive
|
|
jne int13_nocdemu
|
|
|
|
pop dx
|
|
pop cx
|
|
pop bx
|
|
pop ax
|
|
|
|
pusha
|
|
push es
|
|
push ds
|
|
push ss
|
|
pop ds
|
|
|
|
push #int13_out
|
|
jmp _int13_cdemu ;; ELDX not used
|
|
|
|
int13_nocdemu:
|
|
and dl,#0xE0 ;; mask to get device class, including cdroms
|
|
cmp al,dl ;; al is 0x00 or 0x80
|
|
jne int13_cdemu_inactive ;; inactive for device class
|
|
|
|
pop dx
|
|
pop cx
|
|
pop bx
|
|
pop ax
|
|
|
|
push ax
|
|
push cx
|
|
push dx
|
|
push bx
|
|
|
|
dec dl ;; real drive is dl - 1
|
|
jmp int13_legacy
|
|
|
|
int13_cdemu_inactive:
|
|
pop dx
|
|
pop cx
|
|
pop bx
|
|
pop ax
|
|
|
|
#endif // BX_ELTORITO_BOOT
|
|
|
|
int13_noeltorito:
|
|
|
|
push ax
|
|
push cx
|
|
push dx
|
|
push bx
|
|
|
|
int13_legacy:
|
|
|
|
push dx ;; push eltorito value of dx instead of sp
|
|
|
|
push bp
|
|
push si
|
|
push di
|
|
|
|
push es
|
|
push ds
|
|
push ss
|
|
pop ds
|
|
|
|
;; now the 16-bit registers can be restored with:
|
|
;; pop ds; pop es; popa; iret
|
|
;; arguments passed to functions should be
|
|
;; DS, ES, DI, SI, BP, ELDX, BX, DX, CX, AX, IP, CS, FLAGS
|
|
|
|
test dl, #0x80
|
|
jnz int13_notfloppy
|
|
|
|
push #int13_out
|
|
jmp _int13_diskette_function
|
|
|
|
int13_notfloppy:
|
|
|
|
#if BX_USE_ATADRV
|
|
|
|
cmp dl, #0xE0
|
|
jb int13_notcdrom
|
|
|
|
// ebx is modified: BSD 5.2.1 boot loader problem
|
|
// someone should figure out which 32 bit register that actually are used
|
|
|
|
shr ebx, #16
|
|
push bx
|
|
|
|
call _int13_cdrom
|
|
|
|
pop bx
|
|
shl ebx, #16
|
|
|
|
jmp int13_out
|
|
|
|
int13_notcdrom:
|
|
|
|
#endif
|
|
|
|
int13_disk:
|
|
call _int13_harddisk
|
|
|
|
int13_out:
|
|
pop ds
|
|
pop es
|
|
popa
|
|
iret
|
|
|
|
|
|
;----------
|
|
;- INT18h -
|
|
;----------
|
|
int18_handler: ;; Boot Failure routing
|
|
call _int18_panic_msg
|
|
hlt
|
|
iret
|
|
|
|
;----------
|
|
;- INT19h -
|
|
;----------
|
|
int19_relocated: ;; Boot function, relocated
|
|
|
|
;; int19 was beginning to be really complex, so now it
|
|
;; just calls an C function, that does the work
|
|
;; it returns in BL the boot drive, and in AX the boot segment
|
|
;; the boot segment will be 0x0000 if something has failed
|
|
|
|
push bp
|
|
mov bp, sp
|
|
|
|
;; drop ds
|
|
xor ax, ax
|
|
mov ds, ax
|
|
|
|
;; 1st boot device
|
|
mov ax, #0x0001
|
|
push ax
|
|
call _int19_function
|
|
inc sp
|
|
inc sp
|
|
;; bl contains the boot drive
|
|
;; ax contains the boot segment or 0 if failure
|
|
|
|
test ax, ax ;; if ax is 0 try next boot device
|
|
jnz boot_setup
|
|
|
|
;; 2nd boot device
|
|
mov ax, #0x0002
|
|
push ax
|
|
call _int19_function
|
|
inc sp
|
|
inc sp
|
|
test ax, ax ;; if ax is 0 try next boot device
|
|
jnz boot_setup
|
|
|
|
;; 3rd boot device
|
|
mov ax, #0x0003
|
|
push ax
|
|
call _int19_function
|
|
inc sp
|
|
inc sp
|
|
test ax, ax ;; if ax is 0 call int18
|
|
jz int18_handler
|
|
|
|
boot_setup:
|
|
mov dl, bl ;; set drive so guest os find it
|
|
shl eax, #0x04 ;; convert seg to ip
|
|
mov 2[bp], ax ;; set ip
|
|
|
|
shr eax, #0x04 ;; get cs back
|
|
and ax, #0xF000 ;; remove what went in ip
|
|
mov 4[bp], ax ;; set cs
|
|
xor ax, ax
|
|
mov es, ax ;; set es to zero fixes [ 549815 ]
|
|
mov [bp], ax ;; set bp to zero
|
|
mov ax, #0xaa55 ;; set ok flag
|
|
|
|
pop bp
|
|
iret ;; Beam me up Scotty
|
|
|
|
;----------
|
|
;- INT1Ch -
|
|
;----------
|
|
int1c_handler: ;; User Timer Tick
|
|
iret
|
|
|
|
|
|
;----------------------
|
|
;- POST: Floppy Drive -
|
|
;----------------------
|
|
floppy_drive_post:
|
|
xor ax, ax
|
|
mov ds, ax
|
|
|
|
mov al, #0x00
|
|
mov 0x043e, al ;; drive 0 & 1 uncalibrated, no interrupt has occurred
|
|
|
|
mov 0x043f, al ;; diskette motor status: read op, drive0, motors off
|
|
|
|
mov 0x0440, al ;; diskette motor timeout counter: not active
|
|
mov 0x0441, al ;; diskette controller status return code
|
|
|
|
mov 0x0442, al ;; disk & diskette controller status register 0
|
|
mov 0x0443, al ;; diskette controller status register 1
|
|
mov 0x0444, al ;; diskette controller status register 2
|
|
mov 0x0445, al ;; diskette controller cylinder number
|
|
mov 0x0446, al ;; diskette controller head number
|
|
mov 0x0447, al ;; diskette controller sector number
|
|
mov 0x0448, al ;; diskette controller bytes written
|
|
|
|
mov 0x048b, al ;; diskette configuration data
|
|
|
|
;; -----------------------------------------------------------------
|
|
;; (048F) diskette controller information
|
|
;;
|
|
mov al, #0x10 ;; get CMOS diskette drive type
|
|
out 0x70, AL
|
|
in AL, 0x71
|
|
mov ah, al ;; save byte to AH
|
|
|
|
look_drive0:
|
|
shr al, #4 ;; look at top 4 bits for drive 0
|
|
jz f0_missing ;; jump if no drive0
|
|
mov bl, #0x07 ;; drive0 determined, multi-rate, has changed line
|
|
jmp look_drive1
|
|
f0_missing:
|
|
mov bl, #0x00 ;; no drive0
|
|
|
|
look_drive1:
|
|
mov al, ah ;; restore from AH
|
|
and al, #0x0f ;; look at bottom 4 bits for drive 1
|
|
jz f1_missing ;; jump if no drive1
|
|
or bl, #0x70 ;; drive1 determined, multi-rate, has changed line
|
|
f1_missing:
|
|
;; leave high bits in BL zerod
|
|
mov 0x048f, bl ;; put new val in BDA (diskette controller information)
|
|
;; -----------------------------------------------------------------
|
|
|
|
mov al, #0x00
|
|
mov 0x0490, al ;; diskette 0 media state
|
|
mov 0x0491, al ;; diskette 1 media state
|
|
|
|
;; diskette 0,1 operational starting state
|
|
;; drive type has not been determined,
|
|
;; has no changed detection line
|
|
mov 0x0492, al
|
|
mov 0x0493, al
|
|
|
|
mov 0x0494, al ;; diskette 0 current cylinder
|
|
mov 0x0495, al ;; diskette 1 current cylinder
|
|
|
|
mov al, #0x02
|
|
out #0x0a, al ;; clear DMA-1 channel 2 mask bit
|
|
|
|
SET_INT_VECTOR(0x1E, #0xF000, #diskette_param_table2)
|
|
SET_INT_VECTOR(0x40, #0xF000, #int13_diskette)
|
|
SET_INT_VECTOR(0x0E, #0xF000, #int0e_handler) ;; IRQ 6
|
|
|
|
ret
|
|
|
|
|
|
;--------------------
|
|
;- POST: HARD DRIVE -
|
|
;--------------------
|
|
; relocated here because the primary POST area isnt big enough.
|
|
hard_drive_post:
|
|
// IRQ 14 = INT 76h
|
|
// INT 76h calls INT 15h function ax=9100
|
|
|
|
mov al, #0x0a ; 0000 1010 = reserved, disable IRQ 14
|
|
mov dx, #0x03f6
|
|
out dx, al
|
|
|
|
xor ax, ax
|
|
mov ds, ax
|
|
mov 0x0474, al /* hard disk status of last operation */
|
|
mov 0x0477, al /* hard disk port offset (XT only ???) */
|
|
mov 0x048c, al /* hard disk status register */
|
|
mov 0x048d, al /* hard disk error register */
|
|
mov 0x048e, al /* hard disk task complete flag */
|
|
mov al, #0x01
|
|
mov 0x0475, al /* hard disk number attached */
|
|
mov al, #0xc0
|
|
mov 0x0476, al /* hard disk control byte */
|
|
SET_INT_VECTOR(0x13, #0xF000, #int13_handler)
|
|
SET_INT_VECTOR(0x76, #0xF000, #int76_handler)
|
|
;; INT 41h: hard disk 0 configuration pointer
|
|
;; INT 46h: hard disk 1 configuration pointer
|
|
SET_INT_VECTOR(0x41, #EBDA_SEG, #0x003D)
|
|
SET_INT_VECTOR(0x46, #EBDA_SEG, #0x004D)
|
|
|
|
;; move disk geometry data from CMOS to EBDA disk parameter table(s)
|
|
mov al, #0x12
|
|
out #0x70, al
|
|
in al, #0x71
|
|
and al, #0xf0
|
|
cmp al, #0xf0
|
|
je post_d0_extended
|
|
jmp check_for_hd1
|
|
post_d0_extended:
|
|
mov al, #0x19
|
|
out #0x70, al
|
|
in al, #0x71
|
|
cmp al, #47 ;; decimal 47 - user definable
|
|
je post_d0_type47
|
|
HALT(__LINE__)
|
|
post_d0_type47:
|
|
;; CMOS purpose param table offset
|
|
;; 1b cylinders low 0
|
|
;; 1c cylinders high 1
|
|
;; 1d heads 2
|
|
;; 1e write pre-comp low 5
|
|
;; 1f write pre-comp high 6
|
|
;; 20 retries/bad map/heads>8 8
|
|
;; 21 landing zone low C
|
|
;; 22 landing zone high D
|
|
;; 23 sectors/track E
|
|
|
|
mov ax, #EBDA_SEG
|
|
mov ds, ax
|
|
|
|
;;; Filling EBDA table for hard disk 0.
|
|
mov al, #0x1f
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov ah, al
|
|
mov al, #0x1e
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov (0x003d + 0x05), ax ;; write precomp word
|
|
|
|
mov al, #0x20
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov (0x003d + 0x08), al ;; drive control byte
|
|
|
|
mov al, #0x22
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov ah, al
|
|
mov al, #0x21
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov (0x003d + 0x0C), ax ;; landing zone word
|
|
|
|
mov al, #0x1c ;; get cylinders word in AX
|
|
out #0x70, al
|
|
in al, #0x71 ;; high byte
|
|
mov ah, al
|
|
mov al, #0x1b
|
|
out #0x70, al
|
|
in al, #0x71 ;; low byte
|
|
mov bx, ax ;; BX = cylinders
|
|
|
|
mov al, #0x1d
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov cl, al ;; CL = heads
|
|
|
|
mov al, #0x23
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov dl, al ;; DL = sectors
|
|
|
|
cmp bx, #1024
|
|
jnbe hd0_post_logical_chs ;; if cylinders > 1024, use translated style CHS
|
|
|
|
hd0_post_physical_chs:
|
|
;; no logical CHS mapping used, just physical CHS
|
|
;; use Standard Fixed Disk Parameter Table (FDPT)
|
|
mov (0x003d + 0x00), bx ;; number of physical cylinders
|
|
mov (0x003d + 0x02), cl ;; number of physical heads
|
|
mov (0x003d + 0x0E), dl ;; number of physical sectors
|
|
jmp check_for_hd1
|
|
|
|
hd0_post_logical_chs:
|
|
;; complies with Phoenix style Translated Fixed Disk Parameter Table (FDPT)
|
|
mov (0x003d + 0x09), bx ;; number of physical cylinders
|
|
mov (0x003d + 0x0b), cl ;; number of physical heads
|
|
mov (0x003d + 0x04), dl ;; number of physical sectors
|
|
mov (0x003d + 0x0e), dl ;; number of logical sectors (same)
|
|
mov al, #0xa0
|
|
mov (0x003d + 0x03), al ;; A0h signature, indicates translated table
|
|
|
|
cmp bx, #2048
|
|
jnbe hd0_post_above_2048
|
|
;; 1024 < c <= 2048 cylinders
|
|
shr bx, #0x01
|
|
shl cl, #0x01
|
|
jmp hd0_post_store_logical
|
|
|
|
hd0_post_above_2048:
|
|
cmp bx, #4096
|
|
jnbe hd0_post_above_4096
|
|
;; 2048 < c <= 4096 cylinders
|
|
shr bx, #0x02
|
|
shl cl, #0x02
|
|
jmp hd0_post_store_logical
|
|
|
|
hd0_post_above_4096:
|
|
cmp bx, #8192
|
|
jnbe hd0_post_above_8192
|
|
;; 4096 < c <= 8192 cylinders
|
|
shr bx, #0x03
|
|
shl cl, #0x03
|
|
jmp hd0_post_store_logical
|
|
|
|
hd0_post_above_8192:
|
|
;; 8192 < c <= 16384 cylinders
|
|
shr bx, #0x04
|
|
shl cl, #0x04
|
|
|
|
hd0_post_store_logical:
|
|
mov (0x003d + 0x00), bx ;; number of physical cylinders
|
|
mov (0x003d + 0x02), cl ;; number of physical heads
|
|
;; checksum
|
|
mov cl, #0x0f ;; repeat count
|
|
mov si, #0x003d ;; offset to disk0 FDPT
|
|
mov al, #0x00 ;; sum
|
|
hd0_post_checksum_loop:
|
|
add al, [si]
|
|
inc si
|
|
dec cl
|
|
jnz hd0_post_checksum_loop
|
|
not al ;; now take 2s complement
|
|
inc al
|
|
mov [si], al
|
|
;;; Done filling EBDA table for hard disk 0.
|
|
|
|
|
|
check_for_hd1:
|
|
;; is there really a second hard disk? if not, return now
|
|
mov al, #0x12
|
|
out #0x70, al
|
|
in al, #0x71
|
|
and al, #0x0f
|
|
jnz post_d1_exists
|
|
ret
|
|
post_d1_exists:
|
|
;; check that the hd type is really 0x0f.
|
|
cmp al, #0x0f
|
|
jz post_d1_extended
|
|
HALT(__LINE__)
|
|
post_d1_extended:
|
|
;; check that the extended type is 47 - user definable
|
|
mov al, #0x1a
|
|
out #0x70, al
|
|
in al, #0x71
|
|
cmp al, #47 ;; decimal 47 - user definable
|
|
je post_d1_type47
|
|
HALT(__LINE__)
|
|
post_d1_type47:
|
|
;; Table for disk1.
|
|
;; CMOS purpose param table offset
|
|
;; 0x24 cylinders low 0
|
|
;; 0x25 cylinders high 1
|
|
;; 0x26 heads 2
|
|
;; 0x27 write pre-comp low 5
|
|
;; 0x28 write pre-comp high 6
|
|
;; 0x29 heads>8 8
|
|
;; 0x2a landing zone low C
|
|
;; 0x2b landing zone high D
|
|
;; 0x2c sectors/track E
|
|
;;; Fill EBDA table for hard disk 1.
|
|
mov ax, #EBDA_SEG
|
|
mov ds, ax
|
|
mov al, #0x28
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov ah, al
|
|
mov al, #0x27
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov (0x004d + 0x05), ax ;; write precomp word
|
|
|
|
mov al, #0x29
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov (0x004d + 0x08), al ;; drive control byte
|
|
|
|
mov al, #0x2b
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov ah, al
|
|
mov al, #0x2a
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov (0x004d + 0x0C), ax ;; landing zone word
|
|
|
|
mov al, #0x25 ;; get cylinders word in AX
|
|
out #0x70, al
|
|
in al, #0x71 ;; high byte
|
|
mov ah, al
|
|
mov al, #0x24
|
|
out #0x70, al
|
|
in al, #0x71 ;; low byte
|
|
mov bx, ax ;; BX = cylinders
|
|
|
|
mov al, #0x26
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov cl, al ;; CL = heads
|
|
|
|
mov al, #0x2c
|
|
out #0x70, al
|
|
in al, #0x71
|
|
mov dl, al ;; DL = sectors
|
|
|
|
cmp bx, #1024
|
|
jnbe hd1_post_logical_chs ;; if cylinders > 1024, use translated style CHS
|
|
|
|
hd1_post_physical_chs:
|
|
;; no logical CHS mapping used, just physical CHS
|
|
;; use Standard Fixed Disk Parameter Table (FDPT)
|
|
mov (0x004d + 0x00), bx ;; number of physical cylinders
|
|
mov (0x004d + 0x02), cl ;; number of physical heads
|
|
mov (0x004d + 0x0E), dl ;; number of physical sectors
|
|
ret
|
|
|
|
hd1_post_logical_chs:
|
|
;; complies with Phoenix style Translated Fixed Disk Parameter Table (FDPT)
|
|
mov (0x004d + 0x09), bx ;; number of physical cylinders
|
|
mov (0x004d + 0x0b), cl ;; number of physical heads
|
|
mov (0x004d + 0x04), dl ;; number of physical sectors
|
|
mov (0x004d + 0x0e), dl ;; number of logical sectors (same)
|
|
mov al, #0xa0
|
|
mov (0x004d + 0x03), al ;; A0h signature, indicates translated table
|
|
|
|
cmp bx, #2048
|
|
jnbe hd1_post_above_2048
|
|
;; 1024 < c <= 2048 cylinders
|
|
shr bx, #0x01
|
|
shl cl, #0x01
|
|
jmp hd1_post_store_logical
|
|
|
|
hd1_post_above_2048:
|
|
cmp bx, #4096
|
|
jnbe hd1_post_above_4096
|
|
;; 2048 < c <= 4096 cylinders
|
|
shr bx, #0x02
|
|
shl cl, #0x02
|
|
jmp hd1_post_store_logical
|
|
|
|
hd1_post_above_4096:
|
|
cmp bx, #8192
|
|
jnbe hd1_post_above_8192
|
|
;; 4096 < c <= 8192 cylinders
|
|
shr bx, #0x03
|
|
shl cl, #0x03
|
|
jmp hd1_post_store_logical
|
|
|
|
hd1_post_above_8192:
|
|
;; 8192 < c <= 16384 cylinders
|
|
shr bx, #0x04
|
|
shl cl, #0x04
|
|
|
|
hd1_post_store_logical:
|
|
mov (0x004d + 0x00), bx ;; number of physical cylinders
|
|
mov (0x004d + 0x02), cl ;; number of physical heads
|
|
;; checksum
|
|
mov cl, #0x0f ;; repeat count
|
|
mov si, #0x004d ;; offset to disk0 FDPT
|
|
mov al, #0x00 ;; sum
|
|
hd1_post_checksum_loop:
|
|
add al, [si]
|
|
inc si
|
|
dec cl
|
|
jnz hd1_post_checksum_loop
|
|
not al ;; now take 2s complement
|
|
inc al
|
|
mov [si], al
|
|
;;; Done filling EBDA table for hard disk 1.
|
|
|
|
ret
|
|
|
|
;--------------------
|
|
;- POST: EBDA segment
|
|
;--------------------
|
|
; relocated here because the primary POST area isnt big enough.
|
|
ebda_post:
|
|
#if BX_USE_EBDA
|
|
mov ax, #EBDA_SEG
|
|
mov ds, ax
|
|
mov byte ptr [0x0], #EBDA_SIZE
|
|
#endif
|
|
xor ax, ax ; mov EBDA seg into 40E
|
|
mov ds, ax
|
|
mov word ptr [0x40E], #EBDA_SEG
|
|
ret;;
|
|
|
|
;--------------------
|
|
;- POST: EOI + jmp via [0x40:67)
|
|
;--------------------
|
|
; relocated here because the primary POST area isnt big enough.
|
|
eoi_jmp_post:
|
|
call eoi_both_pics
|
|
|
|
xor ax, ax
|
|
mov ds, ax
|
|
|
|
jmp far ptr [0x467]
|
|
|
|
|
|
;--------------------
|
|
eoi_both_pics:
|
|
mov al, #0x20
|
|
out #0xA0, al ;; slave PIC EOI
|
|
eoi_master_pic:
|
|
mov al, #0x20
|
|
out #0x20, al ;; master PIC EOI
|
|
ret
|
|
|
|
;--------------------
|
|
BcdToBin:
|
|
;; in: AL in BCD format
|
|
;; out: AL in binary format, AH will always be 0
|
|
;; trashes BX
|
|
mov bl, al
|
|
and bl, #0x0f ;; bl has low digit
|
|
shr al, #4 ;; al has high digit
|
|
mov bh, #10
|
|
mul al, bh ;; multiply high digit by 10 (result in AX)
|
|
add al, bl ;; then add low digit
|
|
ret
|
|
|
|
;--------------------
|
|
timer_tick_post:
|
|
;; Setup the Timer Ticks Count (0x46C:dword) and
|
|
;; Timer Ticks Roller Flag (0x470:byte)
|
|
;; The Timer Ticks Count needs to be set according to
|
|
;; the current CMOS time, as if ticks have been occurring
|
|
;; at 18.2hz since midnight up to this point. Calculating
|
|
;; this is a little complicated. Here are the factors I gather
|
|
;; regarding this. 14,318,180 hz was the original clock speed,
|
|
;; chosen so it could be divided by either 3 to drive the 5Mhz CPU
|
|
;; at the time, or 4 to drive the CGA video adapter. The div3
|
|
;; source was divided again by 4 to feed a 1.193Mhz signal to
|
|
;; the timer. With a maximum 16bit timer count, this is again
|
|
;; divided down by 65536 to 18.2hz.
|
|
;;
|
|
;; 14,318,180 Hz clock
|
|
;; /3 = 4,772,726 Hz fed to orginal 5Mhz CPU
|
|
;; /4 = 1,193,181 Hz fed to timer
|
|
;; /65536 (maximum timer count) = 18.20650736 ticks/second
|
|
;; 1 second = 18.20650736 ticks
|
|
;; 1 minute = 1092.390442 ticks
|
|
;; 1 hour = 65543.42651 ticks
|
|
;;
|
|
;; Given the values in the CMOS clock, one could calculate
|
|
;; the number of ticks by the following:
|
|
;; ticks = (BcdToBin(seconds) * 18.206507) +
|
|
;; (BcdToBin(minutes) * 1092.3904)
|
|
;; (BcdToBin(hours) * 65543.427)
|
|
;; To get a little more accuracy, since Im using integer
|
|
;; arithmatic, I use:
|
|
;; ticks = (BcdToBin(seconds) * 18206507) / 1000000 +
|
|
;; (BcdToBin(minutes) * 10923904) / 10000 +
|
|
;; (BcdToBin(hours) * 65543427) / 1000
|
|
|
|
;; assuming DS=0000
|
|
|
|
;; get CMOS seconds
|
|
xor eax, eax ;; clear EAX
|
|
mov al, #0x00
|
|
out #0x70, al
|
|
in al, #0x71 ;; AL has CMOS seconds in BCD
|
|
call BcdToBin ;; EAX now has seconds in binary
|
|
mov edx, #18206507
|
|
mul eax, edx
|
|
mov ebx, #1000000
|
|
xor edx, edx
|
|
div eax, ebx
|
|
mov ecx, eax ;; ECX will accumulate total ticks
|
|
|
|
;; get CMOS minutes
|
|
xor eax, eax ;; clear EAX
|
|
mov al, #0x02
|
|
out #0x70, al
|
|
in al, #0x71 ;; AL has CMOS minutes in BCD
|
|
call BcdToBin ;; EAX now has minutes in binary
|
|
mov edx, #10923904
|
|
mul eax, edx
|
|
mov ebx, #10000
|
|
xor edx, edx
|
|
div eax, ebx
|
|
add ecx, eax ;; add to total ticks
|
|
|
|
;; get CMOS hours
|
|
xor eax, eax ;; clear EAX
|
|
mov al, #0x04
|
|
out #0x70, al
|
|
in al, #0x71 ;; AL has CMOS hours in BCD
|
|
call BcdToBin ;; EAX now has hours in binary
|
|
mov edx, #65543427
|
|
mul eax, edx
|
|
mov ebx, #1000
|
|
xor edx, edx
|
|
div eax, ebx
|
|
add ecx, eax ;; add to total ticks
|
|
|
|
mov 0x46C, ecx ;; Timer Ticks Count
|
|
xor al, al
|
|
mov 0x470, al ;; Timer Ticks Rollover Flag
|
|
ret
|
|
|
|
;--------------------
|
|
int76_handler:
|
|
;; record completion in BIOS task complete flag
|
|
push ax
|
|
push ds
|
|
mov ax, #0x0040
|
|
mov ds, ax
|
|
mov 0x008E, #0xff
|
|
call eoi_both_pics
|
|
pop ds
|
|
pop ax
|
|
iret
|
|
|
|
|
|
;--------------------
|
|
#if BX_APM
|
|
|
|
use32 386
|
|
#define APM_PROT32
|
|
#include "apmbios.S"
|
|
|
|
use16 386
|
|
#define APM_PROT16
|
|
#include "apmbios.S"
|
|
|
|
#define APM_REAL
|
|
#include "apmbios.S"
|
|
|
|
#endif
|
|
|
|
;--------------------
|
|
#if BX_PCIBIOS
|
|
use32 386
|
|
.align 16
|
|
bios32_structure:
|
|
db 0x5f, 0x33, 0x32, 0x5f ;; "_32_" signature
|
|
dw bios32_entry_point, 0xf ;; 32 bit physical address
|
|
db 0 ;; revision level
|
|
;; length in paragraphs and checksum stored in a word to prevent errors
|
|
dw (~(((bios32_entry_point >> 8) + (bios32_entry_point & 0xff) + 0x32) \
|
|
& 0xff) << 8) + 0x01
|
|
db 0,0,0,0,0 ;; reserved
|
|
|
|
.align 16
|
|
bios32_entry_point:
|
|
pushfd
|
|
cmp eax, #0x49435024 ;; "$PCI"
|
|
jne unknown_service
|
|
mov eax, #0x80000000
|
|
mov dx, #0x0cf8
|
|
out dx, eax
|
|
mov dx, #0x0cfc
|
|
in eax, dx
|
|
#ifdef PCI_FIXED_HOST_BRIDGE
|
|
cmp eax, #PCI_FIXED_HOST_BRIDGE
|
|
jne unknown_service
|
|
#else
|
|
;; say ok if a device is present
|
|
cmp eax, #0xffffffff
|
|
je unknown_service
|
|
#endif
|
|
mov ebx, #0x000f0000
|
|
mov ecx, #0
|
|
mov edx, #pcibios_protected
|
|
xor al, al
|
|
jmp bios32_end
|
|
unknown_service:
|
|
mov al, #0x80
|
|
bios32_end:
|
|
#ifdef BX_QEMU
|
|
and dword ptr[esp+8],0xfffffffc ;; reset CS.RPL for kqemu
|
|
#endif
|
|
popfd
|
|
retf
|
|
|
|
.align 16
|
|
pcibios_protected:
|
|
pushfd
|
|
cli
|
|
push esi
|
|
push edi
|
|
cmp al, #0x01 ;; installation check
|
|
jne pci_pro_f02
|
|
mov bx, #0x0210
|
|
mov cx, #0
|
|
mov edx, #0x20494350 ;; "PCI "
|
|
mov al, #0x01
|
|
jmp pci_pro_ok
|
|
pci_pro_f02: ;; find pci device
|
|
cmp al, #0x02
|
|
jne pci_pro_f03
|
|
shl ecx, #16
|
|
mov cx, dx
|
|
xor bx, bx
|
|
mov di, #0x00
|
|
pci_pro_devloop:
|
|
call pci_pro_select_reg
|
|
mov dx, #0x0cfc
|
|
in eax, dx
|
|
cmp eax, ecx
|
|
jne pci_pro_nextdev
|
|
cmp si, #0
|
|
je pci_pro_ok
|
|
dec si
|
|
pci_pro_nextdev:
|
|
inc bx
|
|
cmp bx, #0x0100
|
|
jne pci_pro_devloop
|
|
mov ah, #0x86
|
|
jmp pci_pro_fail
|
|
pci_pro_f03: ;; find class code
|
|
cmp al, #0x03
|
|
jne pci_pro_f08
|
|
xor bx, bx
|
|
mov di, #0x08
|
|
pci_pro_devloop2:
|
|
call pci_pro_select_reg
|
|
mov dx, #0x0cfc
|
|
in eax, dx
|
|
shr eax, #8
|
|
cmp eax, ecx
|
|
jne pci_pro_nextdev2
|
|
cmp si, #0
|
|
je pci_pro_ok
|
|
dec si
|
|
pci_pro_nextdev2:
|
|
inc bx
|
|
cmp bx, #0x0100
|
|
jne pci_pro_devloop2
|
|
mov ah, #0x86
|
|
jmp pci_pro_fail
|
|
pci_pro_f08: ;; read configuration byte
|
|
cmp al, #0x08
|
|
jne pci_pro_f09
|
|
call pci_pro_select_reg
|
|
push edx
|
|
mov dx, di
|
|
and dx, #0x03
|
|
add dx, #0x0cfc
|
|
in al, dx
|
|
pop edx
|
|
mov cl, al
|
|
jmp pci_pro_ok
|
|
pci_pro_f09: ;; read configuration word
|
|
cmp al, #0x09
|
|
jne pci_pro_f0a
|
|
call pci_pro_select_reg
|
|
push edx
|
|
mov dx, di
|
|
and dx, #0x02
|
|
add dx, #0x0cfc
|
|
in ax, dx
|
|
pop edx
|
|
mov cx, ax
|
|
jmp pci_pro_ok
|
|
pci_pro_f0a: ;; read configuration dword
|
|
cmp al, #0x0a
|
|
jne pci_pro_f0b
|
|
call pci_pro_select_reg
|
|
push edx
|
|
mov dx, #0x0cfc
|
|
in eax, dx
|
|
pop edx
|
|
mov ecx, eax
|
|
jmp pci_pro_ok
|
|
pci_pro_f0b: ;; write configuration byte
|
|
cmp al, #0x0b
|
|
jne pci_pro_f0c
|
|
call pci_pro_select_reg
|
|
push edx
|
|
mov dx, di
|
|
and dx, #0x03
|
|
add dx, #0x0cfc
|
|
mov al, cl
|
|
out dx, al
|
|
pop edx
|
|
jmp pci_pro_ok
|
|
pci_pro_f0c: ;; write configuration word
|
|
cmp al, #0x0c
|
|
jne pci_pro_f0d
|
|
call pci_pro_select_reg
|
|
push edx
|
|
mov dx, di
|
|
and dx, #0x02
|
|
add dx, #0x0cfc
|
|
mov ax, cx
|
|
out dx, ax
|
|
pop edx
|
|
jmp pci_pro_ok
|
|
pci_pro_f0d: ;; write configuration dword
|
|
cmp al, #0x0d
|
|
jne pci_pro_unknown
|
|
call pci_pro_select_reg
|
|
push edx
|
|
mov dx, #0x0cfc
|
|
mov eax, ecx
|
|
out dx, eax
|
|
pop edx
|
|
jmp pci_pro_ok
|
|
pci_pro_unknown:
|
|
mov ah, #0x81
|
|
pci_pro_fail:
|
|
pop edi
|
|
pop esi
|
|
#ifdef BX_QEMU
|
|
and dword ptr[esp+8],0xfffffffc ;; reset CS.RPL for kqemu
|
|
#endif
|
|
popfd
|
|
stc
|
|
retf
|
|
pci_pro_ok:
|
|
xor ah, ah
|
|
pop edi
|
|
pop esi
|
|
#ifdef BX_QEMU
|
|
and dword ptr[esp+8],0xfffffffc ;; reset CS.RPL for kqemu
|
|
#endif
|
|
popfd
|
|
clc
|
|
retf
|
|
|
|
pci_pro_select_reg:
|
|
push edx
|
|
mov eax, #0x800000
|
|
mov ax, bx
|
|
shl eax, #8
|
|
and di, #0xff
|
|
or ax, di
|
|
and al, #0xfc
|
|
mov dx, #0x0cf8
|
|
out dx, eax
|
|
pop edx
|
|
ret
|
|
|
|
use16 386
|
|
|
|
pcibios_real:
|
|
push eax
|
|
push dx
|
|
mov eax, #0x80000000
|
|
mov dx, #0x0cf8
|
|
out dx, eax
|
|
mov dx, #0x0cfc
|
|
in eax, dx
|
|
#ifdef PCI_FIXED_HOST_BRIDGE
|
|
cmp eax, #PCI_FIXED_HOST_BRIDGE
|
|
je pci_present
|
|
#else
|
|
;; say ok if a device is present
|
|
cmp eax, #0xffffffff
|
|
jne pci_present
|
|
#endif
|
|
pop dx
|
|
pop eax
|
|
mov ah, #0xff
|
|
stc
|
|
ret
|
|
pci_present:
|
|
pop dx
|
|
pop eax
|
|
cmp al, #0x01 ;; installation check
|
|
jne pci_real_f02
|
|
mov ax, #0x0001
|
|
mov bx, #0x0210
|
|
mov cx, #0
|
|
mov edx, #0x20494350 ;; "PCI "
|
|
mov edi, #0xf0000
|
|
mov di, #pcibios_protected
|
|
clc
|
|
ret
|
|
pci_real_f02: ;; find pci device
|
|
push esi
|
|
push edi
|
|
cmp al, #0x02
|
|
jne pci_real_f03
|
|
shl ecx, #16
|
|
mov cx, dx
|
|
xor bx, bx
|
|
mov di, #0x00
|
|
pci_real_devloop:
|
|
call pci_real_select_reg
|
|
mov dx, #0x0cfc
|
|
in eax, dx
|
|
cmp eax, ecx
|
|
jne pci_real_nextdev
|
|
cmp si, #0
|
|
je pci_real_ok
|
|
dec si
|
|
pci_real_nextdev:
|
|
inc bx
|
|
cmp bx, #0x0100
|
|
jne pci_real_devloop
|
|
mov dx, cx
|
|
shr ecx, #16
|
|
mov ax, #0x8602
|
|
jmp pci_real_fail
|
|
pci_real_f03: ;; find class code
|
|
cmp al, #0x03
|
|
jne pci_real_f08
|
|
xor bx, bx
|
|
mov di, #0x08
|
|
pci_real_devloop2:
|
|
call pci_real_select_reg
|
|
mov dx, #0x0cfc
|
|
in eax, dx
|
|
shr eax, #8
|
|
cmp eax, ecx
|
|
jne pci_real_nextdev2
|
|
cmp si, #0
|
|
je pci_real_ok
|
|
dec si
|
|
pci_real_nextdev2:
|
|
inc bx
|
|
cmp bx, #0x0100
|
|
jne pci_real_devloop2
|
|
mov dx, cx
|
|
shr ecx, #16
|
|
mov ax, #0x8603
|
|
jmp pci_real_fail
|
|
pci_real_f08: ;; read configuration byte
|
|
cmp al, #0x08
|
|
jne pci_real_f09
|
|
call pci_real_select_reg
|
|
push dx
|
|
mov dx, di
|
|
and dx, #0x03
|
|
add dx, #0x0cfc
|
|
in al, dx
|
|
pop dx
|
|
mov cl, al
|
|
jmp pci_real_ok
|
|
pci_real_f09: ;; read configuration word
|
|
cmp al, #0x09
|
|
jne pci_real_f0a
|
|
call pci_real_select_reg
|
|
push dx
|
|
mov dx, di
|
|
and dx, #0x02
|
|
add dx, #0x0cfc
|
|
in ax, dx
|
|
pop dx
|
|
mov cx, ax
|
|
jmp pci_real_ok
|
|
pci_real_f0a: ;; read configuration dword
|
|
cmp al, #0x0a
|
|
jne pci_real_f0b
|
|
call pci_real_select_reg
|
|
push dx
|
|
mov dx, #0x0cfc
|
|
in eax, dx
|
|
pop dx
|
|
mov ecx, eax
|
|
jmp pci_real_ok
|
|
pci_real_f0b: ;; write configuration byte
|
|
cmp al, #0x0b
|
|
jne pci_real_f0c
|
|
call pci_real_select_reg
|
|
push dx
|
|
mov dx, di
|
|
and dx, #0x03
|
|
add dx, #0x0cfc
|
|
mov al, cl
|
|
out dx, al
|
|
pop dx
|
|
jmp pci_real_ok
|
|
pci_real_f0c: ;; write configuration word
|
|
cmp al, #0x0c
|
|
jne pci_real_f0d
|
|
call pci_real_select_reg
|
|
push dx
|
|
mov dx, di
|
|
and dx, #0x02
|
|
add dx, #0x0cfc
|
|
mov ax, cx
|
|
out dx, ax
|
|
pop dx
|
|
jmp pci_real_ok
|
|
pci_real_f0d: ;; write configuration dword
|
|
cmp al, #0x0d
|
|
jne pci_real_f0e
|
|
call pci_real_select_reg
|
|
push dx
|
|
mov dx, #0x0cfc
|
|
mov eax, ecx
|
|
out dx, eax
|
|
pop dx
|
|
jmp pci_real_ok
|
|
pci_real_f0e: ;; get irq routing options
|
|
cmp al, #0x0e
|
|
jne pci_real_unknown
|
|
SEG ES
|
|
cmp word ptr [di], #pci_routing_table_structure_end - pci_routing_table_structure_start
|
|
jb pci_real_too_small
|
|
SEG ES
|
|
mov word ptr [di], #pci_routing_table_structure_end - pci_routing_table_structure_start
|
|
pushf
|
|
push ds
|
|
push es
|
|
push cx
|
|
push si
|
|
push di
|
|
cld
|
|
mov si, #pci_routing_table_structure_start
|
|
push cs
|
|
pop ds
|
|
SEG ES
|
|
mov cx, [di+2]
|
|
SEG ES
|
|
mov es, [di+4]
|
|
mov di, cx
|
|
mov cx, #pci_routing_table_structure_end - pci_routing_table_structure_start
|
|
rep
|
|
movsb
|
|
pop di
|
|
pop si
|
|
pop cx
|
|
pop es
|
|
pop ds
|
|
popf
|
|
mov bx, #(1 << 9) | (1 << 11) ;; irq 9 and 11 are used
|
|
jmp pci_real_ok
|
|
pci_real_too_small:
|
|
SEG ES
|
|
mov word ptr [di], #pci_routing_table_structure_end - pci_routing_table_structure_start
|
|
mov ah, #0x89
|
|
jmp pci_real_fail
|
|
|
|
pci_real_unknown:
|
|
mov ah, #0x81
|
|
pci_real_fail:
|
|
pop edi
|
|
pop esi
|
|
stc
|
|
ret
|
|
pci_real_ok:
|
|
xor ah, ah
|
|
pop edi
|
|
pop esi
|
|
clc
|
|
ret
|
|
|
|
pci_real_select_reg:
|
|
push dx
|
|
mov eax, #0x800000
|
|
mov ax, bx
|
|
shl eax, #8
|
|
and di, #0xff
|
|
or ax, di
|
|
and al, #0xfc
|
|
mov dx, #0x0cf8
|
|
out dx, eax
|
|
pop dx
|
|
ret
|
|
|
|
.align 16
|
|
pci_routing_table_structure:
|
|
db 0x24, 0x50, 0x49, 0x52 ;; "$PIR" signature
|
|
db 0, 1 ;; version
|
|
dw 32 + (6 * 16) ;; table size
|
|
db 0 ;; PCI interrupt router bus
|
|
db 0x08 ;; PCI interrupt router DevFunc
|
|
dw 0x0000 ;; PCI exclusive IRQs
|
|
dw 0x8086 ;; compatible PCI interrupt router vendor ID
|
|
dw 0x7000 ;; compatible PCI interrupt router device ID
|
|
dw 0,0 ;; Miniport data
|
|
db 0,0,0,0,0,0,0,0,0,0,0 ;; reserved
|
|
db 0x07 ;; checksum
|
|
pci_routing_table_structure_start:
|
|
;; first slot entry PCI-to-ISA (embedded)
|
|
db 0 ;; pci bus number
|
|
db 0x08 ;; pci device number (bit 7-3)
|
|
db 0x60 ;; link value INTA#: pointer into PCI2ISA config space
|
|
dw 0xdef8 ;; IRQ bitmap INTA#
|
|
db 0x61 ;; link value INTB#
|
|
dw 0xdef8 ;; IRQ bitmap INTB#
|
|
db 0x62 ;; link value INTC#
|
|
dw 0xdef8 ;; IRQ bitmap INTC#
|
|
db 0x63 ;; link value INTD#
|
|
dw 0xdef8 ;; IRQ bitmap INTD#
|
|
db 0 ;; physical slot (0 = embedded)
|
|
db 0 ;; reserved
|
|
;; second slot entry: 1st PCI slot
|
|
db 0 ;; pci bus number
|
|
db 0x10 ;; pci device number (bit 7-3)
|
|
db 0x61 ;; link value INTA#
|
|
dw 0xdef8 ;; IRQ bitmap INTA#
|
|
db 0x62 ;; link value INTB#
|
|
dw 0xdef8 ;; IRQ bitmap INTB#
|
|
db 0x63 ;; link value INTC#
|
|
dw 0xdef8 ;; IRQ bitmap INTC#
|
|
db 0x60 ;; link value INTD#
|
|
dw 0xdef8 ;; IRQ bitmap INTD#
|
|
db 1 ;; physical slot (0 = embedded)
|
|
db 0 ;; reserved
|
|
;; third slot entry: 2nd PCI slot
|
|
db 0 ;; pci bus number
|
|
db 0x18 ;; pci device number (bit 7-3)
|
|
db 0x62 ;; link value INTA#
|
|
dw 0xdef8 ;; IRQ bitmap INTA#
|
|
db 0x63 ;; link value INTB#
|
|
dw 0xdef8 ;; IRQ bitmap INTB#
|
|
db 0x60 ;; link value INTC#
|
|
dw 0xdef8 ;; IRQ bitmap INTC#
|
|
db 0x61 ;; link value INTD#
|
|
dw 0xdef8 ;; IRQ bitmap INTD#
|
|
db 2 ;; physical slot (0 = embedded)
|
|
db 0 ;; reserved
|
|
;; 4th slot entry: 3rd PCI slot
|
|
db 0 ;; pci bus number
|
|
db 0x20 ;; pci device number (bit 7-3)
|
|
db 0x63 ;; link value INTA#
|
|
dw 0xdef8 ;; IRQ bitmap INTA#
|
|
db 0x60 ;; link value INTB#
|
|
dw 0xdef8 ;; IRQ bitmap INTB#
|
|
db 0x61 ;; link value INTC#
|
|
dw 0xdef8 ;; IRQ bitmap INTC#
|
|
db 0x62 ;; link value INTD#
|
|
dw 0xdef8 ;; IRQ bitmap INTD#
|
|
db 3 ;; physical slot (0 = embedded)
|
|
db 0 ;; reserved
|
|
;; 5th slot entry: 4rd PCI slot
|
|
db 0 ;; pci bus number
|
|
db 0x28 ;; pci device number (bit 7-3)
|
|
db 0x60 ;; link value INTA#
|
|
dw 0xdef8 ;; IRQ bitmap INTA#
|
|
db 0x61 ;; link value INTB#
|
|
dw 0xdef8 ;; IRQ bitmap INTB#
|
|
db 0x62 ;; link value INTC#
|
|
dw 0xdef8 ;; IRQ bitmap INTC#
|
|
db 0x63 ;; link value INTD#
|
|
dw 0xdef8 ;; IRQ bitmap INTD#
|
|
db 4 ;; physical slot (0 = embedded)
|
|
db 0 ;; reserved
|
|
;; 6th slot entry: 5rd PCI slot
|
|
db 0 ;; pci bus number
|
|
db 0x30 ;; pci device number (bit 7-3)
|
|
db 0x61 ;; link value INTA#
|
|
dw 0xdef8 ;; IRQ bitmap INTA#
|
|
db 0x62 ;; link value INTB#
|
|
dw 0xdef8 ;; IRQ bitmap INTB#
|
|
db 0x63 ;; link value INTC#
|
|
dw 0xdef8 ;; IRQ bitmap INTC#
|
|
db 0x60 ;; link value INTD#
|
|
dw 0xdef8 ;; IRQ bitmap INTD#
|
|
db 5 ;; physical slot (0 = embedded)
|
|
db 0 ;; reserved
|
|
pci_routing_table_structure_end:
|
|
|
|
#if !BX_ROMBIOS32
|
|
pci_irq_list:
|
|
db 11, 10, 9, 5;
|
|
|
|
pcibios_init_sel_reg:
|
|
push eax
|
|
mov eax, #0x800000
|
|
mov ax, bx
|
|
shl eax, #8
|
|
and dl, #0xfc
|
|
or al, dl
|
|
mov dx, #0x0cf8
|
|
out dx, eax
|
|
pop eax
|
|
ret
|
|
|
|
pcibios_init_iomem_bases:
|
|
push bp
|
|
mov bp, sp
|
|
mov eax, #0xe0000000 ;; base for memory init
|
|
push eax
|
|
mov ax, #0xc000 ;; base for i/o init
|
|
push ax
|
|
mov ax, #0x0010 ;; start at base address #0
|
|
push ax
|
|
mov bx, #0x0008
|
|
pci_init_io_loop1:
|
|
mov dl, #0x00
|
|
call pcibios_init_sel_reg
|
|
mov dx, #0x0cfc
|
|
in ax, dx
|
|
cmp ax, #0xffff
|
|
jz next_pci_dev
|
|
mov dl, #0x04 ;; disable i/o and memory space access
|
|
call pcibios_init_sel_reg
|
|
mov dx, #0x0cfc
|
|
in al, dx
|
|
and al, #0xfc
|
|
out dx, al
|
|
pci_init_io_loop2:
|
|
mov dl, [bp-8]
|
|
call pcibios_init_sel_reg
|
|
mov dx, #0x0cfc
|
|
in eax, dx
|
|
test al, #0x01
|
|
jnz init_io_base
|
|
mov ecx, eax
|
|
mov eax, #0xffffffff
|
|
out dx, eax
|
|
in eax, dx
|
|
cmp eax, ecx
|
|
je next_pci_base
|
|
xor eax, #0xffffffff
|
|
mov ecx, eax
|
|
mov eax, [bp-4]
|
|
out dx, eax
|
|
add eax, ecx ;; calculate next free mem base
|
|
add eax, #0x01000000
|
|
and eax, #0xff000000
|
|
mov [bp-4], eax
|
|
jmp next_pci_base
|
|
init_io_base:
|
|
mov cx, ax
|
|
mov ax, #0xffff
|
|
out dx, ax
|
|
in ax, dx
|
|
cmp ax, cx
|
|
je next_pci_base
|
|
xor ax, #0xfffe
|
|
mov cx, ax
|
|
mov ax, [bp-6]
|
|
out dx, ax
|
|
add ax, cx ;; calculate next free i/o base
|
|
add ax, #0x0100
|
|
and ax, #0xff00
|
|
mov [bp-6], ax
|
|
next_pci_base:
|
|
mov al, [bp-8]
|
|
add al, #0x04
|
|
cmp al, #0x28
|
|
je enable_iomem_space
|
|
mov byte ptr[bp-8], al
|
|
jmp pci_init_io_loop2
|
|
enable_iomem_space:
|
|
mov dl, #0x04 ;; enable i/o and memory space access if available
|
|
call pcibios_init_sel_reg
|
|
mov dx, #0x0cfc
|
|
in al, dx
|
|
or al, #0x07
|
|
out dx, al
|
|
next_pci_dev:
|
|
mov byte ptr[bp-8], #0x10
|
|
inc bx
|
|
cmp bx, #0x0100
|
|
jne pci_init_io_loop1
|
|
mov sp, bp
|
|
pop bp
|
|
ret
|
|
|
|
pcibios_init_set_elcr:
|
|
push ax
|
|
push cx
|
|
mov dx, #0x04d0
|
|
test al, #0x08
|
|
jz is_master_pic
|
|
inc dx
|
|
and al, #0x07
|
|
is_master_pic:
|
|
mov cl, al
|
|
mov bl, #0x01
|
|
shl bl, cl
|
|
in al, dx
|
|
or al, bl
|
|
out dx, al
|
|
pop cx
|
|
pop ax
|
|
ret
|
|
|
|
pcibios_init_irqs:
|
|
push ds
|
|
push bp
|
|
mov ax, #0xf000
|
|
mov ds, ax
|
|
mov dx, #0x04d0 ;; reset ELCR1 + ELCR2
|
|
mov al, #0x00
|
|
out dx, al
|
|
inc dx
|
|
out dx, al
|
|
mov si, #pci_routing_table_structure
|
|
mov bh, [si+8]
|
|
mov bl, [si+9]
|
|
mov dl, #0x00
|
|
call pcibios_init_sel_reg
|
|
mov dx, #0x0cfc
|
|
in eax, dx
|
|
cmp eax, [si+12] ;; check irq router
|
|
jne pci_init_end
|
|
mov dl, [si+34]
|
|
call pcibios_init_sel_reg
|
|
push bx ;; save irq router bus + devfunc
|
|
mov dx, #0x0cfc
|
|
mov ax, #0x8080
|
|
out dx, ax ;; reset PIRQ route control
|
|
inc dx
|
|
inc dx
|
|
out dx, ax
|
|
mov ax, [si+6]
|
|
sub ax, #0x20
|
|
shr ax, #4
|
|
mov cx, ax
|
|
add si, #0x20 ;; set pointer to 1st entry
|
|
mov bp, sp
|
|
mov ax, #pci_irq_list
|
|
push ax
|
|
xor ax, ax
|
|
push ax
|
|
pci_init_irq_loop1:
|
|
mov bh, [si]
|
|
mov bl, [si+1]
|
|
pci_init_irq_loop2:
|
|
mov dl, #0x00
|
|
call pcibios_init_sel_reg
|
|
mov dx, #0x0cfc
|
|
in ax, dx
|
|
cmp ax, #0xffff
|
|
jnz pci_test_int_pin
|
|
test bl, #0x07
|
|
jz next_pir_entry
|
|
jmp next_pci_func
|
|
pci_test_int_pin:
|
|
mov dl, #0x3c
|
|
call pcibios_init_sel_reg
|
|
mov dx, #0x0cfd
|
|
in al, dx
|
|
and al, #0x07
|
|
jz next_pci_func
|
|
dec al ;; determine pirq reg
|
|
mov dl, #0x03
|
|
mul al, dl
|
|
add al, #0x02
|
|
xor ah, ah
|
|
mov bx, ax
|
|
mov al, [si+bx]
|
|
mov dl, al
|
|
mov bx, [bp]
|
|
call pcibios_init_sel_reg
|
|
mov dx, #0x0cfc
|
|
and al, #0x03
|
|
add dl, al
|
|
in al, dx
|
|
cmp al, #0x80
|
|
jb pirq_found
|
|
mov bx, [bp-2] ;; pci irq list pointer
|
|
mov al, [bx]
|
|
out dx, al
|
|
inc bx
|
|
mov [bp-2], bx
|
|
call pcibios_init_set_elcr
|
|
pirq_found:
|
|
mov bh, [si]
|
|
mov bl, [si+1]
|
|
add bl, [bp-3] ;; pci function number
|
|
mov dl, #0x3c
|
|
call pcibios_init_sel_reg
|
|
mov dx, #0x0cfc
|
|
out dx, al
|
|
next_pci_func:
|
|
inc byte ptr[bp-3]
|
|
inc bl
|
|
test bl, #0x07
|
|
jnz pci_init_irq_loop2
|
|
next_pir_entry:
|
|
add si, #0x10
|
|
mov byte ptr[bp-3], #0x00
|
|
loop pci_init_irq_loop1
|
|
mov sp, bp
|
|
pop bx
|
|
pci_init_end:
|
|
pop bp
|
|
pop ds
|
|
ret
|
|
#endif // BX_ROMBIOS32
|
|
#endif // BX_PCIBIOS
|
|
|
|
#if BX_ROMBIOS32
|
|
rombios32_init:
|
|
;; save a20 and enable it
|
|
in al, 0x92
|
|
push ax
|
|
or al, #0x02
|
|
out 0x92, al
|
|
|
|
;; save SS:SP to the BDA
|
|
xor ax, ax
|
|
mov ds, ax
|
|
mov 0x0469, ss
|
|
mov 0x0467, sp
|
|
|
|
SEG CS
|
|
lidt [pmode_IDT_info]
|
|
SEG CS
|
|
lgdt [rombios32_gdt_48]
|
|
;; set PE bit in CR0
|
|
mov eax, cr0
|
|
or al, #0x01
|
|
mov cr0, eax
|
|
;; start protected mode code: ljmpl 0x10:rombios32_init1
|
|
db 0x66, 0xea
|
|
dw rombios32_05
|
|
dw 0x000f ;; high 16 bit address
|
|
dw 0x0010
|
|
|
|
use32 386
|
|
rombios32_05:
|
|
;; init data segments
|
|
mov eax, #0x18
|
|
mov ds, ax
|
|
mov es, ax
|
|
mov ss, ax
|
|
xor eax, eax
|
|
mov fs, ax
|
|
mov gs, ax
|
|
cld
|
|
|
|
;; copy rombios32 code to ram (ram offset = 1MB)
|
|
mov esi, #0xfffe0000
|
|
mov edi, #0x00040000
|
|
mov ecx, #0x10000 / 4
|
|
rep
|
|
movsd
|
|
|
|
;; init the stack pointer
|
|
mov esp, #0x00080000
|
|
|
|
;; call rombios32 code
|
|
mov eax, #0x00040000
|
|
call eax
|
|
|
|
;; return to 16 bit protected mode first
|
|
db 0xea
|
|
dd rombios32_10
|
|
dw 0x20
|
|
|
|
use16 386
|
|
rombios32_10:
|
|
;; restore data segment limits to 0xffff
|
|
mov ax, #0x28
|
|
mov ds, ax
|
|
mov es, ax
|
|
mov ss, ax
|
|
mov fs, ax
|
|
mov gs, ax
|
|
|
|
;; reset PE bit in CR0
|
|
mov eax, cr0
|
|
and al, #0xFE
|
|
mov cr0, eax
|
|
|
|
;; far jump to flush CPU queue after transition to real mode
|
|
JMP_AP(0xf000, rombios32_real_mode)
|
|
|
|
rombios32_real_mode:
|
|
;; restore IDT to normal real-mode defaults
|
|
SEG CS
|
|
lidt [rmode_IDT_info]
|
|
|
|
xor ax, ax
|
|
mov ds, ax
|
|
mov es, ax
|
|
mov fs, ax
|
|
mov gs, ax
|
|
|
|
;; restore SS:SP from the BDA
|
|
mov ss, 0x0469
|
|
xor esp, esp
|
|
mov sp, 0x0467
|
|
;; restore a20
|
|
pop ax
|
|
out 0x92, al
|
|
ret
|
|
|
|
rombios32_gdt_48:
|
|
dw 0x30
|
|
dw rombios32_gdt
|
|
dw 0x000f
|
|
|
|
rombios32_gdt:
|
|
dw 0, 0, 0, 0
|
|
dw 0, 0, 0, 0
|
|
dw 0xffff, 0, 0x9b00, 0x00cf ; 32 bit flat code segment (0x10)
|
|
dw 0xffff, 0, 0x9300, 0x00cf ; 32 bit flat data segment (0x18)
|
|
dw 0xffff, 0, 0x9b0f, 0x0000 ; 16 bit code segment base=0xf0000 limit=0xffff
|
|
dw 0xffff, 0, 0x9300, 0x0000 ; 16 bit data segment base=0x0 limit=0xffff
|
|
#endif
|
|
|
|
|
|
; parallel port detection: base address in DX, index in BX, timeout in CL
|
|
detect_parport:
|
|
push dx
|
|
add dx, #2
|
|
in al, dx
|
|
and al, #0xdf ; clear input mode
|
|
out dx, al
|
|
pop dx
|
|
mov al, #0xaa
|
|
out dx, al
|
|
in al, dx
|
|
cmp al, #0xaa
|
|
jne no_parport
|
|
push bx
|
|
shl bx, #1
|
|
mov [bx+0x408], dx ; Parallel I/O address
|
|
pop bx
|
|
mov [bx+0x478], cl ; Parallel printer timeout
|
|
inc bx
|
|
no_parport:
|
|
ret
|
|
|
|
; serial port detection: base address in DX, index in BX, timeout in CL
|
|
detect_serial:
|
|
push dx
|
|
inc dx
|
|
mov al, #0x02
|
|
out dx, al
|
|
in al, dx
|
|
cmp al, #0x02
|
|
jne no_serial
|
|
inc dx
|
|
in al, dx
|
|
cmp al, #0x02
|
|
jne no_serial
|
|
dec dx
|
|
xor al, al
|
|
out dx, al
|
|
pop dx
|
|
push bx
|
|
shl bx, #1
|
|
mov [bx+0x400], dx ; Serial I/O address
|
|
pop bx
|
|
mov [bx+0x47c], cl ; Serial timeout
|
|
inc bx
|
|
ret
|
|
no_serial:
|
|
pop dx
|
|
ret
|
|
|
|
rom_checksum:
|
|
push ax
|
|
push bx
|
|
push cx
|
|
xor ax, ax
|
|
xor bx, bx
|
|
xor cx, cx
|
|
mov ch, [2]
|
|
shl cx, #1
|
|
checksum_loop:
|
|
add al, [bx]
|
|
inc bx
|
|
loop checksum_loop
|
|
and al, #0xff
|
|
pop cx
|
|
pop bx
|
|
pop ax
|
|
ret
|
|
|
|
rom_scan:
|
|
;; Scan for existence of valid expansion ROMS.
|
|
;; Video ROM: from 0xC0000..0xC7FFF in 2k increments
|
|
;; General ROM: from 0xC8000..0xDFFFF in 2k increments
|
|
;; System ROM: only 0xE0000
|
|
;;
|
|
;; Header:
|
|
;; Offset Value
|
|
;; 0 0x55
|
|
;; 1 0xAA
|
|
;; 2 ROM length in 512-byte blocks
|
|
;; 3 ROM initialization entry point (FAR CALL)
|
|
|
|
mov cx, #0xc000
|
|
rom_scan_loop:
|
|
mov ds, cx
|
|
mov ax, #0x0004 ;; start with increment of 4 (512-byte) blocks = 2k
|
|
cmp [0], #0xAA55 ;; look for signature
|
|
jne rom_scan_increment
|
|
call rom_checksum
|
|
jnz rom_scan_increment
|
|
mov al, [2] ;; change increment to ROM length in 512-byte blocks
|
|
|
|
;; We want our increment in 512-byte quantities, rounded to
|
|
;; the nearest 2k quantity, since we only scan at 2k intervals.
|
|
test al, #0x03
|
|
jz block_count_rounded
|
|
and al, #0xfc ;; needs rounding up
|
|
add al, #0x04
|
|
block_count_rounded:
|
|
|
|
xor bx, bx ;; Restore DS back to 0000:
|
|
mov ds, bx
|
|
push ax ;; Save AX
|
|
;; Push addr of ROM entry point
|
|
push cx ;; Push seg
|
|
push #0x0003 ;; Push offset
|
|
mov bp, sp ;; Call ROM init routine using seg:off on stack
|
|
db 0xff ;; call_far ss:[bp+0]
|
|
db 0x5e
|
|
db 0
|
|
cli ;; In case expansion ROM BIOS turns IF on
|
|
add sp, #2 ;; Pop offset value
|
|
pop cx ;; Pop seg value (restore CX)
|
|
pop ax ;; Restore AX
|
|
rom_scan_increment:
|
|
shl ax, #5 ;; convert 512-bytes blocks to 16-byte increments
|
|
;; because the segment selector is shifted left 4 bits.
|
|
add cx, ax
|
|
cmp cx, #0xe000
|
|
jbe rom_scan_loop
|
|
|
|
xor ax, ax ;; Restore DS back to 0000:
|
|
mov ds, ax
|
|
ret
|
|
|
|
;; for 'C' strings and other data, insert them here with
|
|
;; a the following hack:
|
|
;; DATA_SEG_DEFS_HERE
|
|
|
|
|
|
;; the following area can be used to write dynamically generated tables
|
|
.align 16
|
|
bios_table_area_start:
|
|
dd 0xaafb4442
|
|
dd bios_table_area_end - bios_table_area_start - 8;
|
|
|
|
;--------
|
|
;- POST -
|
|
;--------
|
|
.org 0xe05b ; POST Entry Point
|
|
bios_table_area_end:
|
|
post:
|
|
|
|
xor ax, ax
|
|
|
|
;; first reset the DMA controllers
|
|
out 0x0d,al
|
|
out 0xda,al
|
|
|
|
;; then initialize the DMA controllers
|
|
mov al, #0xC0
|
|
out 0xD6, al ; cascade mode of channel 4 enabled
|
|
mov al, #0x00
|
|
out 0xD4, al ; unmask channel 4
|
|
|
|
;; Examine CMOS shutdown status.
|
|
mov AL, #0x0f
|
|
out 0x70, AL
|
|
in AL, 0x71
|
|
|
|
;; backup status
|
|
mov bl, al
|
|
|
|
;; Reset CMOS shutdown status.
|
|
mov AL, #0x0f
|
|
out 0x70, AL ; select CMOS register Fh
|
|
mov AL, #0x00
|
|
out 0x71, AL ; set shutdown action to normal
|
|
|
|
;; Examine CMOS shutdown status.
|
|
mov al, bl
|
|
|
|
;; 0x00, 0x09, 0x0D+ = normal startup
|
|
cmp AL, #0x00
|
|
jz normal_post
|
|
cmp AL, #0x0d
|
|
jae normal_post
|
|
cmp AL, #0x09
|
|
je normal_post
|
|
|
|
;; 0x05 = eoi + jmp via [0x40:0x67] jump
|
|
cmp al, #0x05
|
|
je eoi_jmp_post
|
|
|
|
;; Examine CMOS shutdown status.
|
|
;; 0x01,0x02,0x03,0x04,0x06,0x07,0x08, 0x0a, 0x0b, 0x0c = Unimplemented shutdown status.
|
|
push bx
|
|
call _shutdown_status_panic
|
|
|
|
#if 0
|
|
HALT(__LINE__)
|
|
;
|
|
;#if 0
|
|
; 0xb0, 0x20, /* mov al, #0x20 */
|
|
; 0xe6, 0x20, /* out 0x20, al ;send EOI to PIC */
|
|
;#endif
|
|
;
|
|
pop es
|
|
pop ds
|
|
popa
|
|
iret
|
|
#endif
|
|
|
|
normal_post:
|
|
; case 0: normal startup
|
|
|
|
cli
|
|
mov ax, #0xfffe
|
|
mov sp, ax
|
|
xor ax, ax
|
|
mov ds, ax
|
|
mov ss, ax
|
|
|
|
;; zero out BIOS data area (40:00..40:ff)
|
|
mov es, ax
|
|
mov cx, #0x0080 ;; 128 words
|
|
mov di, #0x0400
|
|
cld
|
|
rep
|
|
stosw
|
|
|
|
call _log_bios_start
|
|
|
|
;; set all interrupts to default handler
|
|
xor bx, bx ;; offset index
|
|
mov cx, #0x0100 ;; counter (256 interrupts)
|
|
mov ax, #dummy_iret_handler
|
|
mov dx, #0xF000
|
|
|
|
post_default_ints:
|
|
mov [bx], ax
|
|
inc bx
|
|
inc bx
|
|
mov [bx], dx
|
|
inc bx
|
|
inc bx
|
|
loop post_default_ints
|
|
|
|
;; set vector 0x79 to zero
|
|
;; this is used by 'gardian angel' protection system
|
|
SET_INT_VECTOR(0x79, #0, #0)
|
|
|
|
;; base memory in K 40:13 (word)
|
|
mov ax, #BASE_MEM_IN_K
|
|
mov 0x0413, ax
|
|
|
|
|
|
;; Manufacturing Test 40:12
|
|
;; zerod out above
|
|
|
|
;; Warm Boot Flag 0040:0072
|
|
;; value of 1234h = skip memory checks
|
|
;; zerod out above
|
|
|
|
|
|
;; Printer Services vector
|
|
SET_INT_VECTOR(0x17, #0xF000, #int17_handler)
|
|
|
|
;; Bootstrap failure vector
|
|
SET_INT_VECTOR(0x18, #0xF000, #int18_handler)
|
|
|
|
;; Bootstrap Loader vector
|
|
SET_INT_VECTOR(0x19, #0xF000, #int19_handler)
|
|
|
|
;; User Timer Tick vector
|
|
SET_INT_VECTOR(0x1c, #0xF000, #int1c_handler)
|
|
|
|
;; Memory Size Check vector
|
|
SET_INT_VECTOR(0x12, #0xF000, #int12_handler)
|
|
|
|
;; Equipment Configuration Check vector
|
|
SET_INT_VECTOR(0x11, #0xF000, #int11_handler)
|
|
|
|
;; System Services
|
|
SET_INT_VECTOR(0x15, #0xF000, #int15_handler)
|
|
|
|
;; EBDA setup
|
|
call ebda_post
|
|
|
|
;; PIT setup
|
|
SET_INT_VECTOR(0x08, #0xF000, #int08_handler)
|
|
;; int 1C already points at dummy_iret_handler (above)
|
|
mov al, #0x34 ; timer0: binary count, 16bit count, mode 2
|
|
out 0x43, al
|
|
mov al, #0x00 ; maximum count of 0000H = 18.2Hz
|
|
out 0x40, al
|
|
out 0x40, al
|
|
|
|
;; Keyboard
|
|
SET_INT_VECTOR(0x09, #0xF000, #int09_handler)
|
|
SET_INT_VECTOR(0x16, #0xF000, #int16_handler)
|
|
|
|
xor ax, ax
|
|
mov ds, ax
|
|
mov 0x0417, al /* keyboard shift flags, set 1 */
|
|
mov 0x0418, al /* keyboard shift flags, set 2 */
|
|
mov 0x0419, al /* keyboard alt-numpad work area */
|
|
mov 0x0471, al /* keyboard ctrl-break flag */
|
|
mov 0x0497, al /* keyboard status flags 4 */
|
|
mov al, #0x10
|
|
mov 0x0496, al /* keyboard status flags 3 */
|
|
|
|
|
|
/* keyboard head of buffer pointer */
|
|
mov bx, #0x001E
|
|
mov 0x041A, bx
|
|
|
|
/* keyboard end of buffer pointer */
|
|
mov 0x041C, bx
|
|
|
|
/* keyboard pointer to start of buffer */
|
|
mov bx, #0x001E
|
|
mov 0x0480, bx
|
|
|
|
/* keyboard pointer to end of buffer */
|
|
mov bx, #0x003E
|
|
mov 0x0482, bx
|
|
|
|
/* init the keyboard */
|
|
call _keyboard_init
|
|
|
|
;; mov CMOS Equipment Byte to BDA Equipment Word
|
|
mov ax, 0x0410
|
|
mov al, #0x14
|
|
out 0x70, al
|
|
in al, 0x71
|
|
mov 0x0410, ax
|
|
|
|
|
|
;; Parallel setup
|
|
SET_INT_VECTOR(0x0F, #0xF000, #dummy_iret_handler)
|
|
xor ax, ax
|
|
mov ds, ax
|
|
xor bx, bx
|
|
mov cl, #0x14 ; timeout value
|
|
mov dx, #0x378 ; Parallel I/O address, port 1
|
|
call detect_parport
|
|
mov dx, #0x278 ; Parallel I/O address, port 2
|
|
call detect_parport
|
|
shl bx, #0x0e
|
|
mov ax, 0x410 ; Equipment word bits 14..15 determing # parallel ports
|
|
and ax, #0x3fff
|
|
or ax, bx ; set number of parallel ports
|
|
mov 0x410, ax
|
|
|
|
;; Serial setup
|
|
SET_INT_VECTOR(0x0C, #0xF000, #dummy_iret_handler)
|
|
SET_INT_VECTOR(0x14, #0xF000, #int14_handler)
|
|
xor bx, bx
|
|
mov cl, #0x0a ; timeout value
|
|
mov dx, #0x03f8 ; Serial I/O address, port 1
|
|
call detect_serial
|
|
mov dx, #0x02f8 ; Serial I/O address, port 2
|
|
call detect_serial
|
|
mov dx, #0x03e8 ; Serial I/O address, port 3
|
|
call detect_serial
|
|
mov dx, #0x02e8 ; Serial I/O address, port 4
|
|
call detect_serial
|
|
shl bx, #0x09
|
|
mov ax, 0x410 ; Equipment word bits 9..11 determing # serial ports
|
|
and ax, #0xf1ff
|
|
or ax, bx ; set number of serial port
|
|
mov 0x410, ax
|
|
|
|
;; CMOS RTC
|
|
SET_INT_VECTOR(0x1A, #0xF000, #int1a_handler)
|
|
SET_INT_VECTOR(0x4A, #0xF000, #dummy_iret_handler)
|
|
SET_INT_VECTOR(0x70, #0xF000, #int70_handler)
|
|
;; BIOS DATA AREA 0x4CE ???
|
|
call timer_tick_post
|
|
|
|
;; PS/2 mouse setup
|
|
SET_INT_VECTOR(0x74, #0xF000, #int74_handler)
|
|
|
|
;; IRQ13 (FPU exception) setup
|
|
SET_INT_VECTOR(0x75, #0xF000, #int75_handler)
|
|
|
|
;; Video setup
|
|
SET_INT_VECTOR(0x10, #0xF000, #int10_handler)
|
|
|
|
;; PIC
|
|
mov al, #0x11 ; send initialisation commands
|
|
out 0x20, al
|
|
out 0xa0, al
|
|
mov al, #0x08
|
|
out 0x21, al
|
|
mov al, #0x70
|
|
out 0xa1, al
|
|
mov al, #0x04
|
|
out 0x21, al
|
|
mov al, #0x02
|
|
out 0xa1, al
|
|
mov al, #0x01
|
|
out 0x21, al
|
|
out 0xa1, al
|
|
mov al, #0xb8
|
|
out 0x21, AL ;master pic: unmask IRQ 0, 1, 2, 6
|
|
#if BX_USE_PS2_MOUSE
|
|
mov al, #0x8f
|
|
#else
|
|
mov al, #0x9f
|
|
#endif
|
|
out 0xa1, AL ;slave pic: unmask IRQ 12, 13, 14
|
|
|
|
#if BX_ROMBIOS32
|
|
call rombios32_init
|
|
#else
|
|
call pcibios_init_iomem_bases
|
|
call pcibios_init_irqs
|
|
#endif
|
|
call rom_scan
|
|
|
|
call _print_bios_banner
|
|
|
|
;;
|
|
;; Floppy setup
|
|
;;
|
|
call floppy_drive_post
|
|
|
|
#if BX_USE_ATADRV
|
|
|
|
;;
|
|
;; Hard Drive setup
|
|
;;
|
|
call hard_drive_post
|
|
|
|
;;
|
|
;; ATA/ATAPI driver setup
|
|
;;
|
|
call _ata_init
|
|
call _ata_detect
|
|
;;
|
|
#else // BX_USE_ATADRV
|
|
|
|
;;
|
|
;; Hard Drive setup
|
|
;;
|
|
call hard_drive_post
|
|
|
|
#endif // BX_USE_ATADRV
|
|
|
|
#if BX_ELTORITO_BOOT
|
|
;;
|
|
;; eltorito floppy/harddisk emulation from cd
|
|
;;
|
|
call _cdemu_init
|
|
;;
|
|
#endif // BX_ELTORITO_BOOT
|
|
|
|
sti ;; enable interrupts
|
|
int #0x19
|
|
|
|
|
|
.org 0xe2c3 ; NMI Handler Entry Point
|
|
nmi:
|
|
;; FIXME the NMI handler should not panic
|
|
;; but iret when called from int75 (fpu exception)
|
|
call _nmi_handler_msg
|
|
iret
|
|
|
|
int75_handler:
|
|
out 0xf0, al // clear irq13
|
|
call eoi_both_pics // clear interrupt
|
|
int 2 // legacy nmi call
|
|
iret
|
|
|
|
;-------------------------------------------
|
|
;- INT 13h Fixed Disk Services Entry Point -
|
|
;-------------------------------------------
|
|
.org 0xe3fe ; INT 13h Fixed Disk Services Entry Point
|
|
int13_handler:
|
|
//JMPL(int13_relocated)
|
|
jmp int13_relocated
|
|
|
|
.org 0xe401 ; Fixed Disk Parameter Table
|
|
|
|
;----------
|
|
;- INT19h -
|
|
;----------
|
|
.org 0xe6f2 ; INT 19h Boot Load Service Entry Point
|
|
int19_handler:
|
|
|
|
jmp int19_relocated
|
|
;-------------------------------------------
|
|
;- System BIOS Configuration Data Table
|
|
;-------------------------------------------
|
|
.org BIOS_CONFIG_TABLE
|
|
db 0x08 ; Table size (bytes) -Lo
|
|
db 0x00 ; Table size (bytes) -Hi
|
|
db SYS_MODEL_ID
|
|
db SYS_SUBMODEL_ID
|
|
db BIOS_REVISION
|
|
; Feature byte 1
|
|
; b7: 1=DMA channel 3 used by hard disk
|
|
; b6: 1=2 interrupt controllers present
|
|
; b5: 1=RTC present
|
|
; b4: 1=BIOS calls int 15h/4Fh every key
|
|
; b3: 1=wait for extern event supported (Int 15h/41h)
|
|
; b2: 1=extended BIOS data area used
|
|
; b1: 0=AT or ESDI bus, 1=MicroChannel
|
|
; b0: 1=Dual bus (MicroChannel + ISA)
|
|
db (0 << 7) | \
|
|
(1 << 6) | \
|
|
(1 << 5) | \
|
|
(BX_CALL_INT15_4F << 4) | \
|
|
(0 << 3) | \
|
|
(BX_USE_EBDA << 2) | \
|
|
(0 << 1) | \
|
|
(0 << 0)
|
|
; Feature byte 2
|
|
; b7: 1=32-bit DMA supported
|
|
; b6: 1=int16h, function 9 supported
|
|
; b5: 1=int15h/C6h (get POS data) supported
|
|
; b4: 1=int15h/C7h (get mem map info) supported
|
|
; b3: 1=int15h/C8h (en/dis CPU) supported
|
|
; b2: 1=non-8042 kb controller
|
|
; b1: 1=data streaming supported
|
|
; b0: reserved
|
|
db (0 << 7) | \
|
|
(1 << 6) | \
|
|
(0 << 5) | \
|
|
(0 << 4) | \
|
|
(0 << 3) | \
|
|
(0 << 2) | \
|
|
(0 << 1) | \
|
|
(0 << 0)
|
|
; Feature byte 3
|
|
; b7: not used
|
|
; b6: reserved
|
|
; b5: reserved
|
|
; b4: POST supports ROM-to-RAM enable/disable
|
|
; b3: SCSI on system board
|
|
; b2: info panel installed
|
|
; b1: Initial Machine Load (IML) system - BIOS on disk
|
|
; b0: SCSI supported in IML
|
|
db 0x00
|
|
; Feature byte 4
|
|
; b7: IBM private
|
|
; b6: EEPROM present
|
|
; b5-3: ABIOS presence (011 = not supported)
|
|
; b2: private
|
|
; b1: memory split above 16Mb supported
|
|
; b0: POSTEXT directly supported by POST
|
|
db 0x00
|
|
; Feature byte 5 (IBM)
|
|
; b1: enhanced mouse
|
|
; b0: flash EPROM
|
|
db 0x00
|
|
|
|
|
|
|
|
.org 0xe729 ; Baud Rate Generator Table
|
|
|
|
;----------
|
|
;- INT14h -
|
|
;----------
|
|
.org 0xe739 ; INT 14h Serial Communications Service Entry Point
|
|
int14_handler:
|
|
push ds
|
|
pusha
|
|
xor ax, ax
|
|
mov ds, ax
|
|
call _int14_function
|
|
popa
|
|
pop ds
|
|
iret
|
|
|
|
|
|
;----------------------------------------
|
|
;- INT 16h Keyboard Service Entry Point -
|
|
;----------------------------------------
|
|
.org 0xe82e
|
|
int16_handler:
|
|
|
|
sti
|
|
push ds
|
|
pushf
|
|
pusha
|
|
|
|
cmp ah, #0x00
|
|
je int16_F00
|
|
cmp ah, #0x10
|
|
je int16_F00
|
|
|
|
mov bx, #0xf000
|
|
mov ds, bx
|
|
call _int16_function
|
|
popa
|
|
popf
|
|
pop ds
|
|
jz int16_zero_set
|
|
|
|
int16_zero_clear:
|
|
push bp
|
|
mov bp, sp
|
|
//SEG SS
|
|
and BYTE [bp + 0x06], #0xbf
|
|
pop bp
|
|
iret
|
|
|
|
int16_zero_set:
|
|
push bp
|
|
mov bp, sp
|
|
//SEG SS
|
|
or BYTE [bp + 0x06], #0x40
|
|
pop bp
|
|
iret
|
|
|
|
int16_F00:
|
|
mov bx, #0x0040
|
|
mov ds, bx
|
|
|
|
int16_wait_for_key:
|
|
cli
|
|
mov bx, 0x001a
|
|
cmp bx, 0x001c
|
|
jne int16_key_found
|
|
sti
|
|
nop
|
|
#if 0
|
|
/* no key yet, call int 15h, function AX=9002 */
|
|
0x50, /* push AX */
|
|
0xb8, 0x02, 0x90, /* mov AX, #0x9002 */
|
|
0xcd, 0x15, /* int 15h */
|
|
0x58, /* pop AX */
|
|
0xeb, 0xea, /* jmp WAIT_FOR_KEY */
|
|
#endif
|
|
jmp int16_wait_for_key
|
|
|
|
int16_key_found:
|
|
mov bx, #0xf000
|
|
mov ds, bx
|
|
call _int16_function
|
|
popa
|
|
popf
|
|
pop ds
|
|
#if 0
|
|
/* notify int16 complete w/ int 15h, function AX=9102 */
|
|
0x50, /* push AX */
|
|
0xb8, 0x02, 0x91, /* mov AX, #0x9102 */
|
|
0xcd, 0x15, /* int 15h */
|
|
0x58, /* pop AX */
|
|
#endif
|
|
iret
|
|
|
|
|
|
|
|
;-------------------------------------------------
|
|
;- INT09h : Keyboard Hardware Service Entry Point -
|
|
;-------------------------------------------------
|
|
.org 0xe987
|
|
int09_handler:
|
|
cli
|
|
push ax
|
|
|
|
mov al, #0xAD ;;disable keyboard
|
|
out #0x64, al
|
|
|
|
mov al, #0x0B
|
|
out #0x20, al
|
|
in al, #0x20
|
|
and al, #0x02
|
|
jz int09_finish
|
|
|
|
in al, #0x60 ;;read key from keyboard controller
|
|
sti
|
|
push ds
|
|
pusha
|
|
#ifdef BX_CALL_INT15_4F
|
|
mov ah, #0x4f ;; allow for keyboard intercept
|
|
stc
|
|
int #0x15
|
|
jnc int09_done
|
|
#endif
|
|
|
|
;; check for extended key
|
|
cmp al, #0xe0
|
|
jne int09_check_pause
|
|
xor ax, ax
|
|
mov ds, ax
|
|
mov al, BYTE [0x496] ;; mf2_state |= 0x02
|
|
or al, #0x02
|
|
mov BYTE [0x496], al
|
|
jmp int09_done
|
|
|
|
int09_check_pause: ;; check for pause key
|
|
cmp al, #0xe1
|
|
jne int09_process_key
|
|
xor ax, ax
|
|
mov ds, ax
|
|
mov al, BYTE [0x496] ;; mf2_state |= 0x01
|
|
or al, #0x01
|
|
mov BYTE [0x496], al
|
|
jmp int09_done
|
|
|
|
int09_process_key:
|
|
mov bx, #0xf000
|
|
mov ds, bx
|
|
call _int09_function
|
|
|
|
int09_done:
|
|
popa
|
|
pop ds
|
|
cli
|
|
call eoi_master_pic
|
|
|
|
int09_finish:
|
|
mov al, #0xAE ;;enable keyboard
|
|
out #0x64, al
|
|
pop ax
|
|
iret
|
|
|
|
|
|
;----------------------------------------
|
|
;- INT 13h Diskette Service Entry Point -
|
|
;----------------------------------------
|
|
.org 0xec59
|
|
int13_diskette:
|
|
jmp int13_noeltorito
|
|
|
|
;---------------------------------------------
|
|
;- INT 0Eh Diskette Hardware ISR Entry Point -
|
|
;---------------------------------------------
|
|
.org 0xef57 ; INT 0Eh Diskette Hardware ISR Entry Point
|
|
int0e_handler:
|
|
push ax
|
|
push dx
|
|
mov dx, #0x03f4
|
|
in al, dx
|
|
and al, #0xc0
|
|
cmp al, #0xc0
|
|
je int0e_normal
|
|
mov dx, #0x03f5
|
|
mov al, #0x08 ; sense interrupt status
|
|
out dx, al
|
|
int0e_loop1:
|
|
mov dx, #0x03f4
|
|
in al, dx
|
|
and al, #0xc0
|
|
cmp al, #0xc0
|
|
jne int0e_loop1
|
|
int0e_loop2:
|
|
mov dx, #0x03f5
|
|
in al, dx
|
|
mov dx, #0x03f4
|
|
in al, dx
|
|
and al, #0xc0
|
|
cmp al, #0xc0
|
|
je int0e_loop2
|
|
int0e_normal:
|
|
push ds
|
|
xor ax, ax ;; segment 0000
|
|
mov ds, ax
|
|
call eoi_master_pic
|
|
mov al, 0x043e
|
|
or al, #0x80 ;; diskette interrupt has occurred
|
|
mov 0x043e, al
|
|
pop ds
|
|
pop dx
|
|
pop ax
|
|
iret
|
|
|
|
|
|
.org 0xefc7 ; Diskette Controller Parameter Table
|
|
diskette_param_table:
|
|
;; Since no provisions are made for multiple drive types, most
|
|
;; values in this table are ignored. I set parameters for 1.44M
|
|
;; floppy here
|
|
db 0xAF
|
|
db 0x02 ;; head load time 0000001, DMA used
|
|
db 0x25
|
|
db 0x02
|
|
db 18
|
|
db 0x1B
|
|
db 0xFF
|
|
db 0x6C
|
|
db 0xF6
|
|
db 0x0F
|
|
db 0x08
|
|
|
|
|
|
;----------------------------------------
|
|
;- INT17h : Printer Service Entry Point -
|
|
;----------------------------------------
|
|
.org 0xefd2
|
|
int17_handler:
|
|
push ds
|
|
pusha
|
|
xor ax, ax
|
|
mov ds, ax
|
|
call _int17_function
|
|
popa
|
|
pop ds
|
|
iret
|
|
|
|
diskette_param_table2:
|
|
;; New diskette parameter table adding 3 parameters from IBM
|
|
;; Since no provisions are made for multiple drive types, most
|
|
;; values in this table are ignored. I set parameters for 1.44M
|
|
;; floppy here
|
|
db 0xAF
|
|
db 0x02 ;; head load time 0000001, DMA used
|
|
db 0x25
|
|
db 0x02
|
|
db 18
|
|
db 0x1B
|
|
db 0xFF
|
|
db 0x6C
|
|
db 0xF6
|
|
db 0x0F
|
|
db 0x08
|
|
db 79 ;; maximum track
|
|
db 0 ;; data transfer rate
|
|
db 4 ;; drive type in cmos
|
|
|
|
.org 0xf045 ; INT 10 Functions 0-Fh Entry Point
|
|
HALT(__LINE__)
|
|
iret
|
|
|
|
;----------
|
|
;- INT10h -
|
|
;----------
|
|
.org 0xf065 ; INT 10h Video Support Service Entry Point
|
|
int10_handler:
|
|
;; dont do anything, since the VGA BIOS handles int10h requests
|
|
iret
|
|
|
|
.org 0xf0a4 ; MDA/CGA Video Parameter Table (INT 1Dh)
|
|
|
|
;----------
|
|
;- INT12h -
|
|
;----------
|
|
.org 0xf841 ; INT 12h Memory Size Service Entry Point
|
|
; ??? different for Pentium (machine check)?
|
|
int12_handler:
|
|
push ds
|
|
mov ax, #0x0040
|
|
mov ds, ax
|
|
mov ax, 0x0013
|
|
pop ds
|
|
iret
|
|
|
|
;----------
|
|
;- INT11h -
|
|
;----------
|
|
.org 0xf84d ; INT 11h Equipment List Service Entry Point
|
|
int11_handler:
|
|
push ds
|
|
mov ax, #0x0040
|
|
mov ds, ax
|
|
mov ax, 0x0010
|
|
pop ds
|
|
iret
|
|
|
|
;----------
|
|
;- INT15h -
|
|
;----------
|
|
.org 0xf859 ; INT 15h System Services Entry Point
|
|
int15_handler:
|
|
pushf
|
|
#if BX_APM
|
|
cmp ah, #0x53
|
|
je apm_call
|
|
#endif
|
|
push ds
|
|
push es
|
|
cmp ah, #0x86
|
|
je int15_handler32
|
|
cmp ah, #0xE8
|
|
je int15_handler32
|
|
pusha
|
|
#if BX_USE_PS2_MOUSE
|
|
cmp ah, #0xC2
|
|
je int15_handler_mouse
|
|
#endif
|
|
call _int15_function
|
|
int15_handler_mouse_ret:
|
|
popa
|
|
int15_handler32_ret:
|
|
pop es
|
|
pop ds
|
|
popf
|
|
jmp iret_modify_cf
|
|
#if BX_APM
|
|
apm_call:
|
|
jmp _apmreal_entry
|
|
#endif
|
|
|
|
#if BX_USE_PS2_MOUSE
|
|
int15_handler_mouse:
|
|
call _int15_function_mouse
|
|
jmp int15_handler_mouse_ret
|
|
#endif
|
|
|
|
int15_handler32:
|
|
pushad
|
|
call _int15_function32
|
|
popad
|
|
jmp int15_handler32_ret
|
|
|
|
;; Protected mode IDT descriptor
|
|
;;
|
|
;; I just make the limit 0, so the machine will shutdown
|
|
;; if an exception occurs during protected mode memory
|
|
;; transfers.
|
|
;;
|
|
;; Set base to f0000 to correspond to beginning of BIOS,
|
|
;; in case I actually define an IDT later
|
|
;; Set limit to 0
|
|
|
|
pmode_IDT_info:
|
|
dw 0x0000 ;; limit 15:00
|
|
dw 0x0000 ;; base 15:00
|
|
db 0x0f ;; base 23:16
|
|
|
|
;; Real mode IDT descriptor
|
|
;;
|
|
;; Set to typical real-mode values.
|
|
;; base = 000000
|
|
;; limit = 03ff
|
|
|
|
rmode_IDT_info:
|
|
dw 0x03ff ;; limit 15:00
|
|
dw 0x0000 ;; base 15:00
|
|
db 0x00 ;; base 23:16
|
|
|
|
|
|
;----------
|
|
;- INT1Ah -
|
|
;----------
|
|
.org 0xfe6e ; INT 1Ah Time-of-day Service Entry Point
|
|
int1a_handler:
|
|
#if BX_PCIBIOS
|
|
cmp ah, #0xb1
|
|
jne int1a_normal
|
|
call pcibios_real
|
|
jc pcibios_error
|
|
retf 2
|
|
pcibios_error:
|
|
mov bl, ah
|
|
mov ah, #0xb1
|
|
push ds
|
|
pusha
|
|
mov ax, ss ; set readable descriptor to ds, for calling pcibios
|
|
mov ds, ax ; on 16bit protected mode.
|
|
jmp int1a_callfunction
|
|
int1a_normal:
|
|
#endif
|
|
push ds
|
|
pusha
|
|
xor ax, ax
|
|
mov ds, ax
|
|
int1a_callfunction:
|
|
call _int1a_function
|
|
popa
|
|
pop ds
|
|
iret
|
|
|
|
;;
|
|
;; int70h: IRQ8 - CMOS RTC
|
|
;;
|
|
int70_handler:
|
|
push ds
|
|
pushad
|
|
xor ax, ax
|
|
mov ds, ax
|
|
call _int70_function
|
|
popad
|
|
pop ds
|
|
iret
|
|
|
|
;---------
|
|
;- INT08 -
|
|
;---------
|
|
.org 0xfea5 ; INT 08h System Timer ISR Entry Point
|
|
int08_handler:
|
|
sti
|
|
push eax
|
|
push ds
|
|
xor ax, ax
|
|
mov ds, ax
|
|
|
|
;; time to turn off drive(s)?
|
|
mov al,0x0440
|
|
or al,al
|
|
jz int08_floppy_off
|
|
dec al
|
|
mov 0x0440,al
|
|
jnz int08_floppy_off
|
|
;; turn motor(s) off
|
|
push dx
|
|
mov dx,#0x03f2
|
|
in al,dx
|
|
and al,#0xcf
|
|
out dx,al
|
|
pop dx
|
|
int08_floppy_off:
|
|
|
|
mov eax, 0x046c ;; get ticks dword
|
|
inc eax
|
|
|
|
;; compare eax to one days worth of timer ticks at 18.2 hz
|
|
cmp eax, #0x001800B0
|
|
jb int08_store_ticks
|
|
;; there has been a midnight rollover at this point
|
|
xor eax, eax ;; zero out counter
|
|
inc BYTE 0x0470 ;; increment rollover flag
|
|
|
|
int08_store_ticks:
|
|
mov 0x046c, eax ;; store new ticks dword
|
|
;; chain to user timer tick INT #0x1c
|
|
//pushf
|
|
//;; call_ep [ds:loc]
|
|
//CALL_EP( 0x1c << 2 )
|
|
int #0x1c
|
|
cli
|
|
call eoi_master_pic
|
|
pop ds
|
|
pop eax
|
|
iret
|
|
|
|
.org 0xfef3 ; Initial Interrupt Vector Offsets Loaded by POST
|
|
|
|
|
|
.org 0xff00
|
|
.ascii BIOS_COPYRIGHT_STRING
|
|
|
|
;------------------------------------------------
|
|
;- IRET Instruction for Dummy Interrupt Handler -
|
|
;------------------------------------------------
|
|
.org 0xff53 ; IRET Instruction for Dummy Interrupt Handler
|
|
dummy_iret_handler:
|
|
iret
|
|
|
|
.org 0xff54 ; INT 05h Print Screen Service Entry Point
|
|
HALT(__LINE__)
|
|
iret
|
|
|
|
.org 0xfff0 ; Power-up Entry Point
|
|
jmp 0xf000:post
|
|
|
|
.org 0xfff5 ; ASCII Date ROM was built - 8 characters in MM/DD/YY
|
|
.ascii BIOS_BUILD_DATE
|
|
|
|
.org 0xfffe ; System Model ID
|
|
db SYS_MODEL_ID
|
|
db 0x00 ; filler
|
|
|
|
.org 0xfa6e ;; Character Font for 320x200 & 640x200 Graphics (lower 128 characters)
|
|
ASM_END
|
|
/*
|
|
* This font comes from the fntcol16.zip package (c) by Joseph Gil
|
|
* found at ftp://ftp.simtel.net/pub/simtelnet/msdos/screen/fntcol16.zip
|
|
* This font is public domain
|
|
*/
|
|
static Bit8u vgafont8[128*8]=
|
|
{
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x7e, 0x81, 0xa5, 0x81, 0xbd, 0x99, 0x81, 0x7e,
|
|
0x7e, 0xff, 0xdb, 0xff, 0xc3, 0xe7, 0xff, 0x7e,
|
|
0x6c, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10, 0x00,
|
|
0x10, 0x38, 0x7c, 0xfe, 0x7c, 0x38, 0x10, 0x00,
|
|
0x38, 0x7c, 0x38, 0xfe, 0xfe, 0x7c, 0x38, 0x7c,
|
|
0x10, 0x10, 0x38, 0x7c, 0xfe, 0x7c, 0x38, 0x7c,
|
|
0x00, 0x00, 0x18, 0x3c, 0x3c, 0x18, 0x00, 0x00,
|
|
0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff,
|
|
0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00,
|
|
0xff, 0xc3, 0x99, 0xbd, 0xbd, 0x99, 0xc3, 0xff,
|
|
0x0f, 0x07, 0x0f, 0x7d, 0xcc, 0xcc, 0xcc, 0x78,
|
|
0x3c, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18,
|
|
0x3f, 0x33, 0x3f, 0x30, 0x30, 0x70, 0xf0, 0xe0,
|
|
0x7f, 0x63, 0x7f, 0x63, 0x63, 0x67, 0xe6, 0xc0,
|
|
0x99, 0x5a, 0x3c, 0xe7, 0xe7, 0x3c, 0x5a, 0x99,
|
|
0x80, 0xe0, 0xf8, 0xfe, 0xf8, 0xe0, 0x80, 0x00,
|
|
0x02, 0x0e, 0x3e, 0xfe, 0x3e, 0x0e, 0x02, 0x00,
|
|
0x18, 0x3c, 0x7e, 0x18, 0x18, 0x7e, 0x3c, 0x18,
|
|
0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x66, 0x00,
|
|
0x7f, 0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x00,
|
|
0x3e, 0x63, 0x38, 0x6c, 0x6c, 0x38, 0xcc, 0x78,
|
|
0x00, 0x00, 0x00, 0x00, 0x7e, 0x7e, 0x7e, 0x00,
|
|
0x18, 0x3c, 0x7e, 0x18, 0x7e, 0x3c, 0x18, 0xff,
|
|
0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x00,
|
|
0x18, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00,
|
|
0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00,
|
|
0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00,
|
|
0x00, 0x00, 0xc0, 0xc0, 0xc0, 0xfe, 0x00, 0x00,
|
|
0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00,
|
|
0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x00, 0x00,
|
|
0x00, 0xff, 0xff, 0x7e, 0x3c, 0x18, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x30, 0x78, 0x78, 0x30, 0x30, 0x00, 0x30, 0x00,
|
|
0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x6c, 0x6c, 0xfe, 0x6c, 0xfe, 0x6c, 0x6c, 0x00,
|
|
0x30, 0x7c, 0xc0, 0x78, 0x0c, 0xf8, 0x30, 0x00,
|
|
0x00, 0xc6, 0xcc, 0x18, 0x30, 0x66, 0xc6, 0x00,
|
|
0x38, 0x6c, 0x38, 0x76, 0xdc, 0xcc, 0x76, 0x00,
|
|
0x60, 0x60, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x18, 0x30, 0x60, 0x60, 0x60, 0x30, 0x18, 0x00,
|
|
0x60, 0x30, 0x18, 0x18, 0x18, 0x30, 0x60, 0x00,
|
|
0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00,
|
|
0x00, 0x30, 0x30, 0xfc, 0x30, 0x30, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x60,
|
|
0x00, 0x00, 0x00, 0xfc, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00,
|
|
0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00,
|
|
0x7c, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0x7c, 0x00,
|
|
0x30, 0x70, 0x30, 0x30, 0x30, 0x30, 0xfc, 0x00,
|
|
0x78, 0xcc, 0x0c, 0x38, 0x60, 0xcc, 0xfc, 0x00,
|
|
0x78, 0xcc, 0x0c, 0x38, 0x0c, 0xcc, 0x78, 0x00,
|
|
0x1c, 0x3c, 0x6c, 0xcc, 0xfe, 0x0c, 0x1e, 0x00,
|
|
0xfc, 0xc0, 0xf8, 0x0c, 0x0c, 0xcc, 0x78, 0x00,
|
|
0x38, 0x60, 0xc0, 0xf8, 0xcc, 0xcc, 0x78, 0x00,
|
|
0xfc, 0xcc, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x00,
|
|
0x78, 0xcc, 0xcc, 0x78, 0xcc, 0xcc, 0x78, 0x00,
|
|
0x78, 0xcc, 0xcc, 0x7c, 0x0c, 0x18, 0x70, 0x00,
|
|
0x00, 0x30, 0x30, 0x00, 0x00, 0x30, 0x30, 0x00,
|
|
0x00, 0x30, 0x30, 0x00, 0x00, 0x30, 0x30, 0x60,
|
|
0x18, 0x30, 0x60, 0xc0, 0x60, 0x30, 0x18, 0x00,
|
|
0x00, 0x00, 0xfc, 0x00, 0x00, 0xfc, 0x00, 0x00,
|
|
0x60, 0x30, 0x18, 0x0c, 0x18, 0x30, 0x60, 0x00,
|
|
0x78, 0xcc, 0x0c, 0x18, 0x30, 0x00, 0x30, 0x00,
|
|
0x7c, 0xc6, 0xde, 0xde, 0xde, 0xc0, 0x78, 0x00,
|
|
0x30, 0x78, 0xcc, 0xcc, 0xfc, 0xcc, 0xcc, 0x00,
|
|
0xfc, 0x66, 0x66, 0x7c, 0x66, 0x66, 0xfc, 0x00,
|
|
0x3c, 0x66, 0xc0, 0xc0, 0xc0, 0x66, 0x3c, 0x00,
|
|
0xf8, 0x6c, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00,
|
|
0xfe, 0x62, 0x68, 0x78, 0x68, 0x62, 0xfe, 0x00,
|
|
0xfe, 0x62, 0x68, 0x78, 0x68, 0x60, 0xf0, 0x00,
|
|
0x3c, 0x66, 0xc0, 0xc0, 0xce, 0x66, 0x3e, 0x00,
|
|
0xcc, 0xcc, 0xcc, 0xfc, 0xcc, 0xcc, 0xcc, 0x00,
|
|
0x78, 0x30, 0x30, 0x30, 0x30, 0x30, 0x78, 0x00,
|
|
0x1e, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0x78, 0x00,
|
|
0xe6, 0x66, 0x6c, 0x78, 0x6c, 0x66, 0xe6, 0x00,
|
|
0xf0, 0x60, 0x60, 0x60, 0x62, 0x66, 0xfe, 0x00,
|
|
0xc6, 0xee, 0xfe, 0xfe, 0xd6, 0xc6, 0xc6, 0x00,
|
|
0xc6, 0xe6, 0xf6, 0xde, 0xce, 0xc6, 0xc6, 0x00,
|
|
0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x38, 0x00,
|
|
0xfc, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00,
|
|
0x78, 0xcc, 0xcc, 0xcc, 0xdc, 0x78, 0x1c, 0x00,
|
|
0xfc, 0x66, 0x66, 0x7c, 0x6c, 0x66, 0xe6, 0x00,
|
|
0x78, 0xcc, 0xe0, 0x70, 0x1c, 0xcc, 0x78, 0x00,
|
|
0xfc, 0xb4, 0x30, 0x30, 0x30, 0x30, 0x78, 0x00,
|
|
0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xfc, 0x00,
|
|
0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x30, 0x00,
|
|
0xc6, 0xc6, 0xc6, 0xd6, 0xfe, 0xee, 0xc6, 0x00,
|
|
0xc6, 0xc6, 0x6c, 0x38, 0x38, 0x6c, 0xc6, 0x00,
|
|
0xcc, 0xcc, 0xcc, 0x78, 0x30, 0x30, 0x78, 0x00,
|
|
0xfe, 0xc6, 0x8c, 0x18, 0x32, 0x66, 0xfe, 0x00,
|
|
0x78, 0x60, 0x60, 0x60, 0x60, 0x60, 0x78, 0x00,
|
|
0xc0, 0x60, 0x30, 0x18, 0x0c, 0x06, 0x02, 0x00,
|
|
0x78, 0x18, 0x18, 0x18, 0x18, 0x18, 0x78, 0x00,
|
|
0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
|
|
0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0x76, 0x00,
|
|
0xe0, 0x60, 0x60, 0x7c, 0x66, 0x66, 0xdc, 0x00,
|
|
0x00, 0x00, 0x78, 0xcc, 0xc0, 0xcc, 0x78, 0x00,
|
|
0x1c, 0x0c, 0x0c, 0x7c, 0xcc, 0xcc, 0x76, 0x00,
|
|
0x00, 0x00, 0x78, 0xcc, 0xfc, 0xc0, 0x78, 0x00,
|
|
0x38, 0x6c, 0x60, 0xf0, 0x60, 0x60, 0xf0, 0x00,
|
|
0x00, 0x00, 0x76, 0xcc, 0xcc, 0x7c, 0x0c, 0xf8,
|
|
0xe0, 0x60, 0x6c, 0x76, 0x66, 0x66, 0xe6, 0x00,
|
|
0x30, 0x00, 0x70, 0x30, 0x30, 0x30, 0x78, 0x00,
|
|
0x0c, 0x00, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0x78,
|
|
0xe0, 0x60, 0x66, 0x6c, 0x78, 0x6c, 0xe6, 0x00,
|
|
0x70, 0x30, 0x30, 0x30, 0x30, 0x30, 0x78, 0x00,
|
|
0x00, 0x00, 0xcc, 0xfe, 0xfe, 0xd6, 0xc6, 0x00,
|
|
0x00, 0x00, 0xf8, 0xcc, 0xcc, 0xcc, 0xcc, 0x00,
|
|
0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0x78, 0x00,
|
|
0x00, 0x00, 0xdc, 0x66, 0x66, 0x7c, 0x60, 0xf0,
|
|
0x00, 0x00, 0x76, 0xcc, 0xcc, 0x7c, 0x0c, 0x1e,
|
|
0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0xf0, 0x00,
|
|
0x00, 0x00, 0x7c, 0xc0, 0x78, 0x0c, 0xf8, 0x00,
|
|
0x10, 0x30, 0x7c, 0x30, 0x30, 0x34, 0x18, 0x00,
|
|
0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00,
|
|
0x00, 0x00, 0xcc, 0xcc, 0xcc, 0x78, 0x30, 0x00,
|
|
0x00, 0x00, 0xc6, 0xd6, 0xfe, 0xfe, 0x6c, 0x00,
|
|
0x00, 0x00, 0xc6, 0x6c, 0x38, 0x6c, 0xc6, 0x00,
|
|
0x00, 0x00, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xf8,
|
|
0x00, 0x00, 0xfc, 0x98, 0x30, 0x64, 0xfc, 0x00,
|
|
0x1c, 0x30, 0x30, 0xe0, 0x30, 0x30, 0x1c, 0x00,
|
|
0x18, 0x18, 0x18, 0x00, 0x18, 0x18, 0x18, 0x00,
|
|
0xe0, 0x30, 0x30, 0x1c, 0x30, 0x30, 0xe0, 0x00,
|
|
0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0x00,
|
|
};
|
|
|
|
ASM_START
|
|
.org 0xcc00
|
|
// bcc-generated data will be placed here
|
|
ASM_END
|