Bochs/bochs/gui/enh_dbg.h
2009-02-08 18:52:06 +00:00

412 lines
12 KiB
C
Executable File

/////////////////////////////////////////////////////////////////////////
// $Id: enh_dbg.h,v 1.11 2009-02-08 18:52:06 sshwarts Exp $
/////////////////////////////////////////////////////////////////////////
//
// BOCHS ENHANCED DEBUGGER Ver 1.2
// (C) Chourdakis Michael, 2008
// http://www.turboirc.com
//
// Modified by Bruce Ewing
//
#ifndef BX_ENH_DBG_DEF_H
#define BX_ENH_DBG_DEF_H
#if BX_DEBUGGER && BX_DEBUGGER_GUI
#ifndef FALSE
#define FALSE 0
#endif
#ifndef TRUE
#define TRUE 1
#endif
void MoveLists();
void SetStatusText(int column, const char *buf); // should it be here ?
void MakeListsGray();
void DispMessage(const char *msg, const char *title);
void InsertListRow(char *ColumnText[], int ColumnCount, int listnum, int LineCount, int grouping);
void StartListUpdate(int listnum);
void EndListUpdate(int listnum);
void RedrawColumns(int listnum);
void Invalidate(int i);
void TakeInputFocus();
bx_bool ShowAskDialog();
bx_bool NewFont();
void GrayMenuItem(int flag, int CmdIndex);
void ShowMemData(bx_bool initting);
void SetMenuCheckmark (int flag, int CmdIndex);
void ClearInputWindow();
void VSizeChange();
void ToggleWSchecks(int newWS, int oldWS);
void SetOutWinTxt();
void ShowFW();
void GetInputEntry(char *buf);
void SelectHistory(int UpDown);
void HideTree();
void FillPTree();
int GetASMTopIdx();
void ScrollASM(int pixels);
void GetLIText(int listnum, int itemnum, int column, char *buf);
void SetLIState(int listnum, int itemnum, bx_bool Select);
int GetNextSelectedLI(int listnum, int StartPt);
bx_bool OSInit();
void SpecialInit();
void HitBreak();
void ParseIDText(const char *x);
extern char *debug_cmd;
extern bx_bool debug_cmd_ready;
extern bx_bool vgaw_refresh;
#ifdef WIN32
#define CHK_CMD_MODEB CMD_MODEB
#define CHK_CMD_ONECPU CMD_ONECPU
#define CHK_CMD_UCASE CMD_UCASE
#define CHK_CMD_IOWIN CMD_IOWIN
#define CHK_CMD_SBTN CMD_SBTN
#define CHK_CMD_MHEX CMD_MHEX
#define CHK_CMD_MASCII CMD_MASCII
#define CHK_CMD_LEND CMD_LEND
#define CHK_CMD_IGNSA CMD_IGNSA
#define CHK_CMD_IGNNT CMD_IGNNT
#define CHK_CMD_RCLR CMD_RCLR
#define CHK_CMD_EREG CMD_EREG
#else // GTK+
// checkmark indices
#define MODE_BRK 0
#define ONE_CPU 1
#define U_CASE 2
#define IO_WIN 3
#define SHOW_BTN 4
#define MD_HEX 5
#define MD_ASC 6
#define L_END 7
#define IGN_SA 8
#define IGN_NT 9
#define R_CLR 10
#define E_REG 11
#define S_REG 12
#define SYS_R 13
#define C_REG 14
#define FPU_R 15
#define XMM_R 16
#define D_REG 17
//#define T_REG 18
#define CHK_CMD_MODEB MODE_BRK
#define CHK_CMD_ONECPU ONE_CPU
#define CHK_CMD_UCASE U_CASE
#define CHK_CMD_IOWIN IO_WIN
#define CHK_CMD_SBTN SHOW_BTN
#define CHK_CMD_MHEX MD_HEX
#define CHK_CMD_MASCII MD_ASC
#define CHK_CMD_LEND L_END
#define CHK_CMD_IGNSA IGN_SA
#define CHK_CMD_IGNNT IGN_NT
#define CHK_CMD_RCLR R_CLR
#define CHK_CMD_EREG E_REG
#endif
#ifndef WIN32
// Need to define my version of the win32 "virtual keys"
#define VK_PRIOR 65365
#define VK_NEXT 65366
#define VK_F2 65471
#define VK_F3 65472
#define VK_F4 65473
#define VK_F5 65474
#define VK_F6 65475
#define VK_F7 65476
#define VK_F8 65477
#define VK_F9 65478
#define VK_F11 65480
#define VK_UP 65362
#define VK_DOWN 65364
#define VK_RETURN 65293
#define VK_LEFT 65361
#define VK_RIGHT 65363
#define VK_END 65367
#define VK_HOME 65360
#define VK_DELETE 65535
#define VK_ESCAPE 65307
#endif
// User Customizable initial settings:
extern bx_bool SeeReg[8];
extern bx_bool SingleCPU; // Display all SMP CPUs
extern bx_bool ShowIOWindows; // Display the Input and Output Internal Debugger windows
extern bx_bool ShowButtons; // Display the top-row Step/Continue pushbuttons
extern bx_bool SeeRegColors; // Display registers with background color "groups"
extern bx_bool ignoreNxtT; // Do not show "Next at t=" output lines
extern bx_bool ignSSDisasm; // Do not show extra disassembly line at each break
extern int UprCase; // 1 = convert all Asm, Register names, Register values to uppercase
extern int DumpInAsciiMode; // bit 1 = show ASCII in dumps, bit 2 = show hex, value=0 is illegal
extern bx_bool isLittleEndian;
// How to use DockOrder: the Register list is window 1, ASM is window 2, MemDump is window 3
// Create the hex value with the digits in the order you want the windows to be.
// 0x312 would have MemDump on the left, Register in the middle, ASM on the right
extern short DockOrder; // set the default List "docking" (Reg, ASM, Dump)
#define STACK_ENTRIES 50 // # of words/dwords/qwords to display in stack window
// Note: STACK_ENTRIES must be <= 512
// END of User Customizable settings
#ifndef WIN32
#define FMT_LLCAPX "%016llX"
#else
#define FMT_LLCAPX "%016I64X"
#endif
#define MAX_ASM 2048 // max entries in ASM window
extern bx_bool SA_valid;
extern Bit64u SelectedDataAddress;
extern Bit64u CurrentAsmLA; // = EIP/RIP -- for highlighting in ASM window
extern Bit64u BottomAsmLA; // beginning and end addrs on ASM window
extern Bit64u TopAsmLA;
extern Bit64u PrevPtime; // any number other than 0
extern Bit64u NewPtime; // used to test whether sim has "updated"
extern unsigned TotCPUs; // # of CPUs in a multi-CPU simulation
extern unsigned CurrentCPU; // cpu that is being displayed
// AskTest stuff -- for the generic dialog box
struct ASKTEXT {
const char* title;
const char* prompt;
char* reply;
};
extern struct ASKTEXT ask_str;
// window resizing/docking stuff
extern int OneCharWide; // average width of a char in current font (pixels)
extern int Sizing; // current "resizing/docking mode"
extern int Resize_HiX; // horizontal limits of the current resize operation (pixels)
extern int Resize_LoX;
extern unsigned ListWidthPix[3]; // set initial proportions of Reg, Asm, Dump windows
extern int CurCenterList;
extern bx_bool DumpHasFocus;
// BarClix holds the x-axis position (in pixels or logical units) of the two resizing bars,
// in parent coordinates (ie. any window that contains the lists)
extern unsigned short BarClix[2];
extern bx_bool AtBreak; // Status indicators
extern bx_bool StatusChange;
extern bx_bool doOneTimeInit; // Internal flags
extern bx_bool ResizeColmns; // address/value column autosize flag
extern bx_bool FWflag; // friendly warning has been shown to user once already
extern Bit64u PStackLA; // to calculate alignment between prev and current stack
extern bx_bool StackEntChg[STACK_ENTRIES]; // flag for "change detected" on each stack line
// List Window indexes = DockOrder window numbers -1
#define REG_WND 0
#define ASM_WND 1
#define DUMP_WND 2
// DViewModes
#define VIEW_MEMDUMP 0
#define VIEW_GDT 1
#define VIEW_IDT 2
#define VIEW_PAGING 3
#define VIEW_STACK 4
#define VIEW_BREAK 5
#define VIEW_PTREE 6
extern bx_bool DumpInitted; // has the MemDump window ever been filled with data?
extern int DumpAlign;
extern int PrevDAD; // saves "previous DumpAlign value" (forces column autosize)
extern Bit64u DumpStart; // current emulated address (lin or phys) of DataDump
extern bx_bool doDumpRefresh;
extern int DViewMode;
extern bx_bool LinearDump; // FALSE = memdump uses physical addressing
extern char *tmpcb; // 512b is allocated in bigbuf
extern char *AsciiHex; // Unsigned char to printable hex xlat table
#define outbufSIZE 40960
extern char bigbuf[outbufSIZE]; // 40K preallocated storage for all char buffers (see DoAllInit)
extern char *OutWindow; // buffer for the Output window
#define OutWinSIZE 10240
extern int PO_Tdelay; // delay before displaying partial output lines
extern int AsmPgSize;
extern int ListLineRatio; // number of vertical pixels in a ListView Item
extern int ListVerticalPix; // number of vertical pixels in each List
extern int AsmLineCount; // # of disassembled asm lines loaded
extern Bit64u AsmLA[MAX_ASM]; // linear address of each disassembled ASM line
// Command stuff
extern int CommandHistoryIdx;
#define CmdHistorySize 64
extern char *CmdHistory[CmdHistorySize]; // 64 command History storage (fixed 80b each)
extern int CmdHInsert; // index of next history entry to store
// register storage -- names and values
#define RAX_Rnum 0
#define RBX_Rnum 1
#define RCX_Rnum 2
#define RDX_Rnum 3
#define RSI_Rnum 4
#define RDI_Rnum 5
#define RBP_Rnum 6
#define RSP_Rnum 7
#define RIP_Rnum 8
#define R8_Rnum 9
#define R9_Rnum 10
#define R10_Rnum 11
#define R11_Rnum 12
#define R12_Rnum 13
#define R13_Rnum 14
#define R14_Rnum 15
#define R15_Rnum 16
#define EFL_Rnum 17 // it makes the most sense if EFLAGS is between RXX and EXX
#define EAX_Rnum 18 // because it "belongs with" both sets of GP registers
#define EBX_Rnum 19
#define ECX_Rnum 20
#define EDX_Rnum 21
#define ESI_Rnum 22
#define EDI_Rnum 23
#define EBP_Rnum 24
#define ESP_Rnum 25
#define EIP_Rnum 26
#define CS_Rnum 27
#define DS_Rnum 28
#define ES_Rnum 29
#define SS_Rnum 30
#define FS_Rnum 31
#define GS_Rnum 32
#define GDTRnum 33
#define IDTRnum 34
#define LDTRnum 35
#define TRRnum 36
#define CR0_Rnum 37
#define CR3_Rnum 38
#define CR4_Rnum 39
#define EFER_Rnum 40 // currently used to mark the last entry in rV[]
#define ST0_Rnum 41
#define ST1_Rnum 42
#define ST2_Rnum 43
#define ST3_Rnum 44
#define ST4_Rnum 45
#define ST5_Rnum 46
#define ST6_Rnum 47
#define ST7_Rnum 48
#define XMM0_Rnum 49
#define XMM1_Rnum 50
#define XMM2_Rnum 51
#define XMM3_Rnum 52
#define XMM4_Rnum 53
#define XMM5_Rnum 54
#define XMM6_Rnum 55
#define XMM7_Rnum 56
#define XMM8_Rnum 57
#define XMM9_Rnum 58
#define XMMA_Rnum 59
#define XMMB_Rnum 60
#define XMMC_Rnum 61
#define XMMD_Rnum 62
#define XMME_Rnum 63
#define XMMF_Rnum 64
#define DR0_Rnum 65
#define DR1_Rnum 66
#define DR2_Rnum 67
#define DR3_Rnum 68
#define DR6_Rnum 69
#define DR7_Rnum 70
// #define TR0_Rnum 71 -- put Test Registers in here when they are supported
#define TOT_REG_NUM 72
// extra "register numbers" for registers that have more than one part
#define GDTR_Lim 72
#define IDTR_Lim 73
#define ST0_exp 74
#define ST1_exp 75
#define ST2_exp 76
#define ST3_exp 77
#define ST4_exp 78
#define ST5_exp 79
#define ST6_exp 80
#define ST7_exp 81
#define XMM0_hi 82
#define XMM1_hi 82
#define XMM2_hi 83
#define XMM3_hi 84
#define XMM4_hi 85
#define XMM5_hi 86
#define XMM6_hi 87
#define XMM7_hi 88
#define XMM8_hi 89
#define XMM9_hi 90
#define XMMA_hi 91
#define XMMB_hi 92
#define XMMC_hi 93
#define XMMD_hi 94
#define XMME_hi 95
#define XMMF_hi 96
#define EXTRA_REGS 28
extern Bit8u RegColor[TOT_REG_NUM]; // specifies foreground and background color of registers
// Text color is red if the upper bit is set. Background is set according to ColorList.
extern int RitemToRnum[TOT_REG_NUM]; // mapping from Reg List Item# to register number
// do the linear breakpoint list as 2 arrays, rather than a structure -- much easier to search!
extern bx_address BrkLAddr[BX_DBG_MAX_LIN_BPOINTS];
extern int BreakCount;
// Breakpoint Dump Window stuff
extern unsigned short BrkpIDMap[256];
extern unsigned short WWP_BaseEntry;
extern unsigned short RWP_BaseEntry;
extern unsigned short EndLinEntry;
extern unsigned short EndPhyEntry;
extern unsigned short WWPSnapCount;
extern unsigned short RWPSnapCount;
extern bx_phy_address WWP_Snapshot[16];
extern bx_phy_address RWP_Snapshot[16];
extern int SizeList;
extern Bit32s xClick; // halfway through a mouseclick flag + location
extern Bit32s yClick; // values are in Listview coordinates
#include "wenhdbg_res.h" // MenuIDs
static const char* DC0txt[2] = {"P.Address","L.Address"}; // DumpMode definitions in text
static const char* BTxt[6] = {
"Continue [c]",
"Step [s]",
"Step N [s ###]",
"Refresh",
"Break [^C]",
"Break All"};
static int BtnLkup[6] = {
CMD_CONT, CMD_STEP1, CMD_STEPN, CMD_RFRSH, CMD_BREAK
};
#endif
#endif