///////////////////////////////////////////////////////////////////////// // $Id: proc_ctrl.cc,v 1.209 2008-04-07 18:39:17 sshwarts Exp $ ///////////////////////////////////////////////////////////////////////// // // Copyright (C) 2001 MandrakeSoft S.A. // // MandrakeSoft S.A. // 43, rue d'Aboukir // 75002 Paris - France // http://www.linux-mandrake.com/ // http://www.mandrakesoft.com/ // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public // License as published by the Free Software Foundation; either // version 2 of the License, or (at your option) any later version. // // This library is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // Lesser General Public License for more details. // // You should have received a copy of the GNU Lesser General Public // License along with this library; if not, write to the Free Software // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // ///////////////////////////////////////////////////////////////////////// #define NEED_CPU_REG_SHORTCUTS 1 #include "bochs.h" #include "cpu.h" #define LOG_THIS BX_CPU_THIS_PTR #if BX_SUPPORT_X86_64==0 // Make life easier for merging code. #define RAX EAX #define RCX ECX #define RDX EDX #endif void BX_CPP_AttrRegparmN(1) BX_CPU_C::UndefinedOpcode(bxInstruction_c *i) { BX_DEBUG(("UndefinedOpcode: 0x%d%02x causes #UD exception", i->hasOpcodeExtension(), i->b1())); exception(BX_UD_EXCEPTION, 0, 0); } void BX_CPP_AttrRegparmN(1) BX_CPU_C::NOP(bxInstruction_c *i) { // No operation. } void BX_CPP_AttrRegparmN(1) BX_CPU_C::PREFETCH(bxInstruction_c *i) { #if BX_SUPPORT_3DNOW || BX_SUPPORT_SSE >= 1 if (i->modC0()) { BX_ERROR(("PREFETCH: use of register is undefined opcode")); UndefinedOpcode(i); } #if BX_INSTRUMENTATION BX_CPU_CALL_METHODR(i->ResolveModrm, (i)); BX_INSTR_PREFETCH_HINT(BX_CPU_ID, i->nnn(), i->seg(), RMAddr(i)); #endif #else BX_INFO(("PREFETCH: required SSE or 3DNOW support")); UndefinedOpcode(i); #endif } // // The shutdown state is very similar to the state following the exection // if HLT instruction. In this mode the processor stops executing // instructions until #NMI, #SMI, #RESET or #INIT is received. If // shutdown occurs why in NMI interrupt handler or in SMM, a hardware // reset must be used to restart the processor execution. // void BX_CPU_C::shutdown(void) { BX_PANIC(("Entering to shutdown state still not implemented")); BX_CPU_THIS_PTR clear_IF(); // artificial trap bit, why use another variable. BX_CPU_THIS_PTR debug_trap |= BX_DEBUG_TRAP_SHUTDOWN; // artificial trap BX_CPU_THIS_PTR async_event = 1; // so processor knows to check // Execution of this instruction completes. The processor // will remain in a halt state until one of the above conditions // is met. BX_INSTR_HLT(BX_CPU_ID); #if BX_USE_IDLE_HACK bx_gui->sim_is_idle(); #endif longjmp(BX_CPU_THIS_PTR jmp_buf_env, 1); // go back to main decode loop } void BX_CPP_AttrRegparmN(1) BX_CPU_C::HLT(bxInstruction_c *i) { if (!real_mode() && CPL!=0) { BX_DEBUG(("HLT: %s priveledge check failed, CPL=%d, generate #GP(0)", cpu_mode_string(BX_CPU_THIS_PTR cpu_mode), CPL)); exception(BX_GP_EXCEPTION, 0, 0); } if (! BX_CPU_THIS_PTR get_IF()) { BX_INFO(("WARNING: HLT instruction with IF=0!")); } // stops instruction execution and places the processor in a // HALT state. An enabled interrupt, NMI, or reset will resume // execution. If interrupt (including NMI) is used to resume // execution after HLT, the saved CS:eIP points to instruction // following HLT. // artificial trap bit, why use another variable. BX_CPU_THIS_PTR debug_trap |= BX_DEBUG_TRAP_HALT; // artificial trap BX_CPU_THIS_PTR async_event = 1; // so processor knows to check // Execution of this instruction completes. The processor // will remain in a halt state until one of the above conditions // is met. BX_INSTR_HLT(BX_CPU_ID); #if BX_DEBUGGER bx_dbg_halt(BX_CPU_ID); #endif #if BX_USE_IDLE_HACK bx_gui->sim_is_idle(); #endif } void BX_CPP_AttrRegparmN(1) BX_CPU_C::CLTS(bxInstruction_c *i) { if (!real_mode() && CPL!=0) { BX_ERROR(("CLTS: priveledge check failed, generate #GP(0)")); exception(BX_GP_EXCEPTION, 0, 0); } BX_CPU_THIS_PTR cr0.set_TS(0); } void BX_CPP_AttrRegparmN(1) BX_CPU_C::INVD(bxInstruction_c *i) { #if BX_CPU_LEVEL >= 4 if (!real_mode() && CPL!=0) { BX_ERROR(("INVD: priveledge check failed, generate #GP(0)")); exception(BX_GP_EXCEPTION, 0, 0); } invalidate_prefetch_q(); BX_DEBUG(("INVD: Flush internal caches !")); BX_INSTR_CACHE_CNTRL(BX_CPU_ID, BX_INSTR_INVD); #if BX_SUPPORT_ICACHE flushICaches(); #endif #else BX_INFO(("INVD: required 486 support, use --enable-cpu-level=4 option")); UndefinedOpcode(i); #endif } void BX_CPP_AttrRegparmN(1) BX_CPU_C::WBINVD(bxInstruction_c *i) { #if BX_CPU_LEVEL >= 4 if (!real_mode() && CPL!=0) { BX_ERROR(("WBINVD: priveledge check failed, generate #GP(0)")); exception(BX_GP_EXCEPTION, 0, 0); } invalidate_prefetch_q(); BX_DEBUG(("WBINVD: Flush internal caches !")); BX_INSTR_CACHE_CNTRL(BX_CPU_ID, BX_INSTR_WBINVD); #if BX_SUPPORT_ICACHE flushICaches(); #endif #else BX_INFO(("WBINVD: required 486 support, use --enable-cpu-level=4 option")); UndefinedOpcode(i); #endif } void BX_CPP_AttrRegparmN(1) BX_CPU_C::CLFLUSH(bxInstruction_c *i) { #if BX_SUPPORT_CLFLUSH bx_segment_reg_t *seg = &BX_CPU_THIS_PTR sregs[i->seg()]; BX_CPU_CALL_METHODR(i->ResolveModrm, (i)); // check if we could access the memory segment if ((seg->cache.valid & SegAccessROK4G) != SegAccessROK4G) { execute_virtual_checks(seg, RMAddr(i), 1); } bx_address laddr = BX_CPU_THIS_PTR get_laddr(i->seg(), RMAddr(i)); bx_phy_address paddr; if (BX_CPU_THIS_PTR cr0.get_PG()) { paddr = dtranslate_linear(laddr, CPL, BX_READ); paddr = A20ADDR(paddr); } else { paddr = A20ADDR(laddr); } BX_INSTR_CLFLUSH(BX_CPU_ID, laddr, paddr); #else BX_INFO(("CLFLUSH: not supported, enable with SSE2")); UndefinedOpcode(i); #endif } #if BX_CPU_LEVEL >= 3 void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_DdRd(bxInstruction_c *i) { if (!real_mode() && CPL!=0) { BX_ERROR(("MOV_DdRd: CPL!=0 not in real mode")); exception(BX_GP_EXCEPTION, 0, 0); } /* NOTES: * 32bit operands always used * r/m field specifies general register * reg field specifies which special register */ invalidate_prefetch_q(); /* This instruction is always treated as a register-to-register, * regardless of the encoding of the MOD field in the MODRM byte. */ if (!i->modC0()) BX_PANIC(("MOV_DdRd(): rm field not a register!")); Bit32u val_32 = BX_READ_32BIT_REG(i->rm()); switch (i->nnn()) { case 0: // DR0 BX_CPU_THIS_PTR dr0 = val_32; break; case 1: // DR1 BX_CPU_THIS_PTR dr1 = val_32; break; case 2: // DR2 BX_CPU_THIS_PTR dr2 = val_32; break; case 3: // DR3 BX_CPU_THIS_PTR dr3 = val_32; break; case 4: // DR4 // DR4 aliased to DR6 by default. With Debug Extensions on, // access to DR4 causes #UD #if BX_CPU_LEVEL >= 4 if (BX_CPU_THIS_PTR cr4.get_DE()) { // Debug extensions CR4.DE is ON BX_INFO(("MOV_DdRd: access to DR4 causes #UD")); UndefinedOpcode(i); } #endif // Fall through to DR6 case case 6: // DR6 #if BX_CPU_LEVEL <= 4 // On 386/486 bit12 is settable BX_CPU_THIS_PTR dr6 = (BX_CPU_THIS_PTR dr6 & 0xffff0ff0) | (val_32 & 0x0000f00f); #else // On Pentium+, bit12 is always zero BX_CPU_THIS_PTR dr6 = (BX_CPU_THIS_PTR dr6 & 0xffff0ff0) | (val_32 & 0x0000e00f); #endif break; case 5: // DR5 // DR5 aliased to DR7 by default. With Debug Extensions on, // access to DR5 causes #UD #if BX_CPU_LEVEL >= 4 if (BX_CPU_THIS_PTR cr4.get_DE()) { // Debug extensions CR4.DE is ON BX_INFO(("MOV_DdRd: access to DR5 causes #UD")); UndefinedOpcode(i); } #endif // Fall through to DR7 case case 7: // DR7 // Note: 486+ ignore GE and LE flags. On the 386, exact // data breakpoint matching does not occur unless it is enabled // by setting the LE and/or GE flags. // Some sanity checks... if (val_32 & 0x00002000) { BX_INFO(("MOV_DdRd: GD bit not supported yet")); // Note: processor clears GD upon entering debug exception // handler, to allow access to the debug registers } if ((((val_32>>16) & 3)==2) || (((val_32>>20) & 3)==2) || (((val_32>>24) & 3)==2) || (((val_32>>28) & 3)==2)) { // IO breakpoints (10b) are not yet supported. BX_PANIC(("MOV_DdRd: write of %08x contains IO breakpoint", val_32)); } if ((((val_32>>18) & 3)==2) || (((val_32>>22) & 3)==2) || (((val_32>>26) & 3)==2) || (((val_32>>30) & 3)==2)) { // LEN0..3 contains undefined length specifier (10b) BX_PANIC(("MOV_DdRd: write of %08x contains undefined LENx", val_32)); } if (((((val_32>>16) & 3)==0) && (((val_32>>18) & 3)!=0)) || ((((val_32>>20) & 3)==0) && (((val_32>>22) & 3)!=0)) || ((((val_32>>24) & 3)==0) && (((val_32>>26) & 3)!=0)) || ((((val_32>>28) & 3)==0) && (((val_32>>30) & 3)!=0))) { // Instruction breakpoint with LENx not 00b (1-byte length) BX_PANIC(("MOV_DdRd: write of %08x, R/W=00b LEN!=00b", val_32)); } #if BX_CPU_LEVEL <= 4 // 386/486: you can play with all the bits except b10 is always 1 BX_CPU_THIS_PTR dr7 = val_32 | 0x00000400; #else // Pentium+: bits15,14,12 are hardwired to 0, rest are settable. // Even bits 11,10 are changeable though reserved. BX_CPU_THIS_PTR dr7 = (val_32 & 0xffff2fff) | 0x00000400; #endif // if we have breakpoints enabled then we must check // breakpoints condition in cpu loop if(BX_CPU_THIS_PTR dr7 & 0xff) BX_CPU_THIS_PTR async_event = 1; break; default: BX_ERROR(("MOV_DdRd: #UD - control register index out of range")); UndefinedOpcode(i); } } void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_RdDd(bxInstruction_c *i) { Bit32u val_32; if (!real_mode() && CPL!=0) { BX_ERROR(("MOV_RdDd: CPL!=0 not in real mode")); exception(BX_GP_EXCEPTION, 0, 0); } /* This instruction is always treated as a register-to-register, * regardless of the encoding of the MOD field in the MODRM byte. */ if (!i->modC0()) BX_PANIC(("MOV_RdDd(): rm field not a register!")); switch (i->nnn()) { case 0: // DR0 val_32 = (Bit32u) BX_CPU_THIS_PTR dr0; break; case 1: // DR1 val_32 = (Bit32u) BX_CPU_THIS_PTR dr1; break; case 2: // DR2 val_32 = (Bit32u) BX_CPU_THIS_PTR dr2; break; case 3: // DR3 val_32 = (Bit32u) BX_CPU_THIS_PTR dr3; break; case 4: // DR4 // DR4 aliased to DR6 by default. With Debug Extensions on, // access to DR4 causes #UD #if BX_CPU_LEVEL >= 4 if (BX_CPU_THIS_PTR cr4.get_DE()) { // Debug extensions CR4.DE is ON BX_INFO(("MOV_RdDd: access to DR4 causes #UD")); UndefinedOpcode(i); } #endif // Fall through to DR6 case case 6: // DR6 val_32 = BX_CPU_THIS_PTR dr6; break; case 5: // DR5 // DR5 aliased to DR7 by default. With Debug Extensions on, // access to DR5 causes #UD #if BX_CPU_LEVEL >= 4 if (BX_CPU_THIS_PTR cr4.get_DE()) { // Debug extensions CR4.DE is ON BX_INFO(("MOV_RdDd: access to DR5 causes #UD")); UndefinedOpcode(i); } #endif // Fall through to DR7 case case 7: // DR7 val_32 = BX_CPU_THIS_PTR dr7; break; default: BX_ERROR(("MOV_RdDd: #UD - control register index out of range")); UndefinedOpcode(i); } BX_WRITE_32BIT_REGZ(i->rm(), val_32); } #if BX_SUPPORT_X86_64 void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_DqRq(bxInstruction_c *i) { BX_ASSERT(protected_mode()); /* NOTES: * 64bit operands always used * r/m field specifies general register * reg field specifies which special register */ /* #GP(0) if CPL is not 0 */ if (CPL != 0) { BX_ERROR(("MOV_DqRq: #GP(0) if CPL is not 0")); exception(BX_GP_EXCEPTION, 0, 0); } invalidate_prefetch_q(); /* This instruction is always treated as a register-to-register, * regardless of the encoding of the MOD field in the MODRM byte. */ if (!i->modC0()) BX_PANIC(("MOV_DqRq(): rm field not a register!")); Bit64u val_64 = BX_READ_64BIT_REG(i->rm()); switch (i->nnn()) { case 0: // DR0 BX_CPU_THIS_PTR dr0 = val_64; break; case 1: // DR1 BX_CPU_THIS_PTR dr1 = val_64; break; case 2: // DR2 BX_CPU_THIS_PTR dr2 = val_64; break; case 3: // DR3 BX_CPU_THIS_PTR dr3 = val_64; break; case 4: // DR4 // DR4 aliased to DR6 by default. With Debug Extensions on, // access to DR4 causes #UD if (BX_CPU_THIS_PTR cr4.get_DE()) { // Debug extensions CR4.DE is ON BX_INFO(("MOV_DqRq: access to DR4 causes #UD")); UndefinedOpcode(i); } // Fall through to DR6 case case 6: // DR6 // On Pentium+, bit12 is always zero BX_CPU_THIS_PTR dr6 = (BX_CPU_THIS_PTR dr6 & 0xffff0ff0) | (val_64 & 0x0000e00f); break; case 5: // DR5 // DR5 aliased to DR7 by default. With Debug Extensions on, // access to DR5 causes #UD if (BX_CPU_THIS_PTR cr4.get_DE()) { // Debug extensions CR4.DE is ON BX_INFO(("MOV_DqRq: access to DR5 causes #UD")); UndefinedOpcode(i); } // Fall through to DR7 case case 7: // DR7 // Note: 486+ ignore GE and LE flags. On the 386, exact // data breakpoint matching does not occur unless it is enabled // by setting the LE and/or GE flags. // Some sanity checks... if (val_64 & 0x00002000) { BX_PANIC(("MOV_DqRq: GD bit not supported yet")); // Note: processor clears GD upon entering debug exception // handler, to allow access to the debug registers } if ((((val_64>>16) & 3)==2) || (((val_64>>20) & 3)==2) || (((val_64>>24) & 3)==2) || (((val_64>>28) & 3)==2)) { // IO breakpoints (10b) are not yet supported. BX_PANIC(("MOV_DqRq: write of %08x:%08x contains IO breakpoint", (Bit32u)(val_64 >> 32), (Bit32u)(val_64 & 0xFFFFFFFF))); } if ((((val_64>>18) & 3)==2) || (((val_64>>22) & 3)==2) || (((val_64>>26) & 3)==2) || (((val_64>>30) & 3)==2)) { // LEN0..3 contains undefined length specifier (10b) BX_PANIC(("MOV_DqRq: write of %08x:%08x contains undefined LENx", (Bit32u)(val_64 >> 32), (Bit32u)(val_64 & 0xFFFFFFFF))); } if (((((val_64>>16) & 3)==0) && (((val_64>>18) & 3)!=0)) || ((((val_64>>20) & 3)==0) && (((val_64>>22) & 3)!=0)) || ((((val_64>>24) & 3)==0) && (((val_64>>26) & 3)!=0)) || ((((val_64>>28) & 3)==0) && (((val_64>>30) & 3)!=0))) { // Instruction breakpoint with LENx not 00b (1-byte length) BX_PANIC(("MOV_DqRq: write of %08x:%08x , R/W=00b LEN!=00b", (Bit32u)(val_64 >> 32), (Bit32u)(val_64 & 0xFFFFFFFF))); } // Pentium+: bits15,14,12 are hardwired to 0, rest are settable. // Even bits 11,10 are changeable though reserved. BX_CPU_THIS_PTR dr7 = (val_64 & 0xffff2fff) | 0x00000400; break; default: BX_ERROR(("MOV_DqRq: #UD - control register index out of range")); UndefinedOpcode(i); } } void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_RqDq(bxInstruction_c *i) { Bit64u val_64; BX_ASSERT(protected_mode()); /* #GP(0) if CPL is not 0 */ if (CPL != 0) { BX_ERROR(("MOV_RqDq: #GP(0) if CPL is not 0")); exception(BX_GP_EXCEPTION, 0, 0); } /* This instruction is always treated as a register-to-register, * regardless of the encoding of the MOD field in the MODRM byte. */ if (!i->modC0()) BX_PANIC(("MOV_RqDq(): rm field not a register!")); switch (i->nnn()) { case 0: // DR0 val_64 = BX_CPU_THIS_PTR dr0; break; case 1: // DR1 val_64 = BX_CPU_THIS_PTR dr1; break; case 2: // DR2 val_64 = BX_CPU_THIS_PTR dr2; break; case 3: // DR3 val_64 = BX_CPU_THIS_PTR dr3; break; case 4: // DR4 // DR4 aliased to DR6 by default. With Debug Extensions on, // access to DR4 causes #UD if (BX_CPU_THIS_PTR cr4.get_DE()) { // Debug extensions CR4.DE is ON BX_INFO(("MOV_RqDq: access to DR4 causes #UD")); UndefinedOpcode(i); } // Fall through to DR6 case case 6: // DR6 val_64 = BX_CPU_THIS_PTR dr6; break; case 5: // DR5 // DR5 aliased to DR7 by default. With Debug Extensions on, // access to DR5 causes #UD if (BX_CPU_THIS_PTR cr4.get_DE()) { // Debug extensions CR4.DE is ON BX_INFO(("MOV_RqDq: access to DR5 causes #UD")); UndefinedOpcode(i); } // Fall through to DR7 case case 7: // DR7 val_64 = BX_CPU_THIS_PTR dr7; break; default: BX_ERROR(("MOV_DqRq: #UD - control register index out of range")); UndefinedOpcode(i); } BX_WRITE_64BIT_REG(i->rm(), val_64); } #endif // #if BX_SUPPORT_X86_64 void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_CdRd(bxInstruction_c *i) { if (!real_mode() && CPL!=0) { BX_ERROR(("MOV_CdRd: CPL!=0 not in real mode")); exception(BX_GP_EXCEPTION, 0, 0); } /* NOTES: * 32bit operands always used * r/m field specifies general register * reg field specifies which special register */ invalidate_prefetch_q(); /* This instruction is always treated as a register-to-register, * regardless of the encoding of the MOD field in the MODRM byte. */ if (!i->modC0()) BX_PANIC(("MOV_CdRd(): rm field not a register!")); Bit32u val_32 = BX_READ_32BIT_REG(i->rm()); switch (i->nnn()) { case 0: // CR0 (MSW) SetCR0(val_32); break; case 2: /* CR2 */ BX_DEBUG(("MOV_CdRd:CR2 = %08x", (unsigned) val_32)); BX_CPU_THIS_PTR cr2 = val_32; break; case 3: // CR3 BX_DEBUG(("MOV_CdRd:CR3 = %08x", (unsigned) val_32)); // Reserved bits take on value of MOV instruction CR3_change(val_32); BX_INSTR_TLB_CNTRL(BX_CPU_ID, BX_INSTR_MOV_CR3, val_32); break; case 4: // CR4 #if BX_CPU_LEVEL == 3 BX_PANIC(("MOV_CdRd: write to CR4 of 0x%08x on 386", val_32)); UndefinedOpcode(i); #else // Protected mode: #GP(0) if attempt to write a 1 to // any reserved bit of CR4 if (! SetCR4(val_32)) exception(BX_GP_EXCEPTION, 0, 0); #endif break; default: BX_ERROR(("MOV_CdRd: #UD - control register index out of range")); UndefinedOpcode(i); } } void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_RdCd(bxInstruction_c *i) { // mov control register data to register Bit32u val_32; if (!real_mode() && CPL!=0) { BX_ERROR(("MOV_RdCd: CPL!=0 not in real mode")); exception(BX_GP_EXCEPTION, 0, 0); } /* NOTES: * 32bit operands always used * r/m field specifies general register * reg field specifies which special register */ /* This instruction is always treated as a register-to-register, * regardless of the encoding of the MOD field in the MODRM byte. */ if (!i->modC0()) BX_PANIC(("MOV_RdCd(): rm field not a register!")); switch (i->nnn()) { case 0: // CR0 (MSW) val_32 = BX_CPU_THIS_PTR cr0.getRegister(); break; case 2: /* CR2 */ BX_DEBUG(("MOV_RdCd: reading CR2")); val_32 = (Bit32u) BX_CPU_THIS_PTR cr2; break; case 3: // CR3 BX_DEBUG(("MOV_RdCd: reading CR3")); val_32 = BX_CPU_THIS_PTR cr3; break; case 4: // CR4 #if BX_CPU_LEVEL < 4 val_32 = 0; BX_INFO(("MOV_RdCd: read of CR4 causes #UD")); UndefinedOpcode(i); #else BX_DEBUG(("MOV_RdCd: read of CR4")); val_32 = BX_CPU_THIS_PTR cr4.getRegister(); #endif break; default: BX_ERROR(("MOV_RdCd: #UD - control register index out of range")); UndefinedOpcode(i); } BX_WRITE_32BIT_REGZ(i->rm(), val_32); } #if BX_SUPPORT_X86_64 void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_CqRq(bxInstruction_c *i) { BX_ASSERT(protected_mode()); /* NOTES: * 64bit operands always used * r/m field specifies general register * reg field specifies which special register */ /* #GP(0) if CPL is not 0 */ if (CPL!=0) { BX_ERROR(("MOV_CqRq: #GP(0) if CPL is not 0")); exception(BX_GP_EXCEPTION, 0, 0); } /* This instruction is always treated as a register-to-register, * regardless of the encoding of the MOD field in the MODRM byte. */ if (!i->modC0()) BX_PANIC(("MOV_CqRq(): rm field not a register!")); invalidate_prefetch_q(); Bit64u val_64 = BX_READ_64BIT_REG(i->rm()); switch (i->nnn()) { case 0: // CR0 (MSW) SetCR0((Bit32u) val_64); break; case 2: /* CR2 */ BX_DEBUG(("MOV_CqRq: write to CR2 of %08x:%08x", (Bit32u)(val_64 >> 32), (Bit32u)(val_64 & 0xFFFFFFFF))); BX_CPU_THIS_PTR cr2 = val_64; break; case 3: // CR3 BX_DEBUG(("MOV_CqRq: write to CR3 of %08x:%08x", (Bit32u)(val_64 >> 32), (Bit32u)(val_64 & 0xFFFFFFFF))); if (val_64 & BX_CONST64(0xffffffff00000000)) { BX_PANIC(("CR3 write: Only 32 bit physical address space is emulated !")); } // Reserved bits take on value of MOV instruction CR3_change((bx_phy_address) val_64); BX_INSTR_TLB_CNTRL(BX_CPU_ID, BX_INSTR_MOV_CR3, val_64); break; case 4: // CR4 // Protected mode: #GP(0) if attempt to write a 1 to // any reserved bit of CR4 BX_DEBUG(("MOV_CqRq: write to CR4 of %08x:%08x", (Bit32u)(val_64 >> 32), (Bit32u)(val_64 & 0xFFFFFFFF))); if (! SetCR4((Bit32u) val_64)) exception(BX_GP_EXCEPTION, 0, 0); break; #if BX_SUPPORT_APIC case 8: // CR8 // CR8 is aliased to APIC->TASK PRIORITY register // APIC.TPR[7:4] = CR8[3:0] // APIC.TPR[3:0] = 0 // Reads of CR8 return zero extended APIC.TPR[7:4] // Write to CR8 update APIC.TPR[7:4] BX_CPU_THIS_PTR local_apic.set_tpr((val_64 & 0xF) << 0x4); break; #endif default: BX_ERROR(("MOV_CqRq: #UD - control register index out of range")); UndefinedOpcode(i); } } void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_RqCq(bxInstruction_c *i) { // mov control register data to register Bit64u val_64; BX_ASSERT(protected_mode()); /* NOTES: * 64bit operands always used * r/m field specifies general register * reg field specifies which special register */ /* #GP(0) if CPL is not 0 */ if (CPL!=0) { BX_ERROR(("MOV_RqCq: #GP(0) if CPL is not 0")); exception(BX_GP_EXCEPTION, 0, 0); } /* This instruction is always treated as a register-to-register, * regardless of the encoding of the MOD field in the MODRM byte. */ if (!i->modC0()) BX_PANIC(("MOV_RqCq(): rm field not a register!")); switch (i->nnn()) { case 0: // CR0 (MSW) val_64 = BX_CPU_THIS_PTR cr0.getRegister(); break; case 2: /* CR2 */ BX_DEBUG(("MOV_RqCq: read of CR2")); val_64 = BX_CPU_THIS_PTR cr2; break; case 3: // CR3 BX_DEBUG(("MOV_RqCq: read of CR3")); val_64 = BX_CPU_THIS_PTR cr3; break; case 4: // CR4 BX_DEBUG(("MOV_RqCq: read of CR4")); val_64 = BX_CPU_THIS_PTR cr4.getRegister(); break; #if BX_SUPPORT_APIC case 8: // CR8 // CR8 is aliased to APIC->TASK PRIORITY register // APIC.TPR[7:4] = CR8[3:0] // APIC.TPR[3:0] = 0 // Reads of CR8 return zero extended APIC.TPR[7:4] // Write to CR8 update APIC.TPR[7:4] val_64 = (BX_CPU_THIS_PTR local_apic.get_tpr() & 0xF) >> 4; break; #endif default: BX_ERROR(("MOV_RqCq: #UD - control register index out of range")); UndefinedOpcode(i); } BX_WRITE_64BIT_REG(i->rm(), val_64); } #endif // #if BX_SUPPORT_X86_64 #endif // #if BX_CPU_LEVEL >= 3 #if BX_CPU_LEVEL >= 2 void BX_CPP_AttrRegparmN(1) BX_CPU_C::LMSW_Ew(bxInstruction_c *i) { Bit16u msw; Bit32u cr0; if (!real_mode() && CPL!=0) { BX_ERROR(("LMSW: CPL!=0 not in real mode")); exception(BX_GP_EXCEPTION, 0, 0); } invalidate_prefetch_q(); if (i->modC0()) { msw = BX_READ_16BIT_REG(i->rm()); } else { BX_CPU_CALL_METHODR(i->ResolveModrm, (i)); /* pointer, segment address pair */ msw = read_virtual_word(i->seg(), RMAddr(i)); } // LMSW does not affect PG,CD,NW,AM,WP,NE,ET bits, and cannot clear PE // LMSW cannot clear PE if (BX_CPU_THIS_PTR cr0.get_PE()) msw |= 0x0001; // adjust PE bit to current value of 1 msw &= 0x000f; // LMSW only affects last 4 flags cr0 = (BX_CPU_THIS_PTR cr0.getRegister() & 0xfffffff0) | msw; SetCR0(cr0); } void BX_CPP_AttrRegparmN(1) BX_CPU_C::SMSW_Ew(bxInstruction_c *i) { Bit16u msw; #if BX_CPU_LEVEL == 2 msw = 0xfff0; /* 80286 init value */ msw |= BX_CPU_THIS_PTR cr0.getRegister() & 0x000f; #else /* 386+ */ msw = BX_CPU_THIS_PTR cr0.getRegister() & 0xffff; #endif if (i->modC0()) { if (i->os32L()) { BX_WRITE_32BIT_REGZ(i->rm(), msw); // zeros out high 16bits } else { BX_WRITE_16BIT_REG(i->rm(), msw); } } else { BX_CPU_CALL_METHODR(i->ResolveModrm, (i)); /* pointer, segment address pair */ write_virtual_word(i->seg(), RMAddr(i), msw); } } #endif void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_TdRd(bxInstruction_c *i) { #if BX_CPU_LEVEL <= 4 BX_PANIC(("MOV_TdRd: Still not implemented")); #else // Pentium+ does not have TRx. They were redesigned using the MSRs. BX_INFO(("MOV_TdRd: causes #UD")); UndefinedOpcode(i); #endif } void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_RdTd(bxInstruction_c *i) { #if BX_CPU_LEVEL <= 4 BX_PANIC(("MOV_RdTd: Still not implemented")); #else // Pentium+ does not have TRx. They were redesigned using the MSRs. BX_INFO(("MOV_RdTd: causes #UD")); UndefinedOpcode(i); #endif } #if BX_CPU_LEVEL == 2 void BX_CPP_AttrRegparmN(1) BX_CPU_C::LOADALL(bxInstruction_c *i) { Bit16u msw, tr, flags, ip, ldtr; Bit16u ds_raw, ss_raw, cs_raw, es_raw; Bit16u base_15_0, limit; Bit8u base_23_16, access; if (v8086_mode()) BX_PANIC(("proc_ctrl: LOADALL in v8086 mode unsupported")); if (BX_CPU_THIS_PTR cr0.get_PE()) { BX_PANIC(("LOADALL not yet supported for protected mode")); } BX_PANIC(("LOADALL: handle CR0.val32")); /* MSW */ BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x806, 2, &msw); BX_CPU_THIS_PTR cr0.set_PE(msw & 0x01); msw >>= 1; BX_CPU_THIS_PTR cr0.set_MP(msw & 0x01); msw >>= 1; BX_CPU_THIS_PTR cr0.set_EM(msw & 0x01); msw >>= 1; BX_CPU_THIS_PTR cr0.set_TS(msw & 0x01); if (BX_CPU_THIS_PTR cr0.get_PE() || BX_CPU_THIS_PTR cr0.get_MP() || BX_CPU_THIS_PTR cr0.get_EM() || BX_CPU_THIS_PTR cr0.get_TS()) BX_PANIC(("LOADALL set PE, MP, EM or TS bits in MSW!")); /* TR */ BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x816, 2, &tr); BX_CPU_THIS_PTR tr.selector.value = tr; BX_CPU_THIS_PTR tr.selector.rpl = (tr & 0x03); tr >>= 2; BX_CPU_THIS_PTR tr.selector.ti = (tr & 0x01); tr >>= 1; BX_CPU_THIS_PTR tr.selector.index = tr; BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x860, 2, &base_15_0); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x862, 1, &base_23_16); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x863, 1, &access); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x864, 2, &limit); BX_CPU_THIS_PTR tr.cache.valid = BX_CPU_THIS_PTR tr.cache.p = (access & 0x80) >> 7; BX_CPU_THIS_PTR tr.cache.dpl = (access & 0x60) >> 5; BX_CPU_THIS_PTR tr.cache.segment = (access & 0x10) >> 4; // don't allow busy bit in tr.cache.type, so bit 2 is masked away too. BX_CPU_THIS_PTR tr.cache.type = (access & 0x0d); BX_CPU_THIS_PTR tr.cache.u.system.base = (base_23_16 << 16) | base_15_0; BX_CPU_THIS_PTR tr.cache.u.system.limit = limit; if ((BX_CPU_THIS_PTR tr.selector.value & 0xfffc) == 0) { BX_CPU_THIS_PTR tr.cache.valid = 0; } if (BX_CPU_THIS_PTR tr.cache.u.system.limit < 43 || BX_CPU_THIS_PTR tr.cache.type != BX_SYS_SEGMENT_AVAIL_286_TSS || BX_CPU_THIS_PTR tr.cache.segment) { BX_CPU_THIS_PTR tr.cache.valid = 0; } if (BX_CPU_THIS_PTR tr.cache.valid==0) { BX_CPU_THIS_PTR tr.selector.value = 0; BX_CPU_THIS_PTR tr.selector.index = 0; BX_CPU_THIS_PTR tr.selector.ti = 0; BX_CPU_THIS_PTR tr.selector.rpl = 0; BX_CPU_THIS_PTR tr.cache.u.system.base = 0; BX_CPU_THIS_PTR tr.cache.u.system.limit = 0; BX_CPU_THIS_PTR tr.cache.p = 0; } /* FLAGS */ BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x818, 2, &flags); write_flags(flags, 1, 1); /* IP */ BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x81a, 2, &IP); /* LDTR */ BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x81c, 2, &ldtr); BX_CPU_THIS_PTR ldtr.selector.value = ldtr; BX_CPU_THIS_PTR ldtr.selector.rpl = (ldtr & 0x03); ldtr >>= 2; BX_CPU_THIS_PTR ldtr.selector.ti = (ldtr & 0x01); ldtr >>= 1; BX_CPU_THIS_PTR ldtr.selector.index = ldtr; if ((BX_CPU_THIS_PTR ldtr.selector.value & 0xfffc) == 0) { BX_CPU_THIS_PTR ldtr.cache.valid = 0; BX_CPU_THIS_PTR ldtr.cache.p = 0; BX_CPU_THIS_PTR ldtr.cache.segment = 0; BX_CPU_THIS_PTR ldtr.cache.type = 0; BX_CPU_THIS_PTR ldtr.cache.u.system.base = 0; BX_CPU_THIS_PTR ldtr.cache.u.system.limit = 0; BX_CPU_THIS_PTR ldtr.selector.value = 0; BX_CPU_THIS_PTR ldtr.selector.index = 0; BX_CPU_THIS_PTR ldtr.selector.ti = 0; } else { BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x854, 2, &base_15_0); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x856, 1, &base_23_16); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x857, 1, &access); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x858, 2, &limit); BX_CPU_THIS_PTR ldtr.cache.valid = BX_CPU_THIS_PTR ldtr.cache.p = access >> 7; BX_CPU_THIS_PTR ldtr.cache.dpl = (access >> 5) & 0x03; BX_CPU_THIS_PTR ldtr.cache.segment = (access >> 4) & 0x01; BX_CPU_THIS_PTR ldtr.cache.type = (access & 0x0f); BX_CPU_THIS_PTR ldtr.cache.u.system.base = (base_23_16 << 16) | base_15_0; BX_CPU_THIS_PTR ldtr.cache.u.system.limit = limit; if (access == 0) { BX_PANIC(("loadall: LDTR case access byte=0")); } if (BX_CPU_THIS_PTR ldtr.cache.valid==0) { BX_PANIC(("loadall: ldtr.valid=0")); } if (BX_CPU_THIS_PTR ldtr.cache.segment) { /* not a system segment */ BX_INFO((" AR byte = %02x", (unsigned) access)); BX_PANIC(("loadall: LDTR descriptor cache loaded with non system segment")); } if (BX_CPU_THIS_PTR ldtr.cache.type != BX_SYS_SEGMENT_LDT) { BX_PANIC(("loadall: LDTR.type(%u) != LDT", (unsigned) (access & 0x0f))); } } /* DS */ BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x81e, 2, &ds_raw); BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.value = ds_raw; BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.rpl = (ds_raw & 0x03); ds_raw >>= 2; BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.ti = (ds_raw & 0x01); ds_raw >>= 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.index = ds_raw; BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x848, 2, &base_15_0); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x84a, 1, &base_23_16); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x84b, 1, &access); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x84c, 2, &limit); BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.u.segment.base = (base_23_16 << 16) | base_15_0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.u.segment.limit = limit; set_ar_byte(BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache, access); if ((BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.value & 0xfffc) == 0) { BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.valid = 0; } else { BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.valid = 1; } if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.valid==0 || BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].cache.segment==0) { BX_PANIC(("loadall: DS invalid")); } /* SS */ BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x820, 2, &ss_raw); BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.value = ss_raw; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.rpl = (ss_raw & 0x03); ss_raw >>= 2; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.ti = (ss_raw & 0x01); ss_raw >>= 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.index = ss_raw; BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x842, 2, &base_15_0); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x844, 1, &base_23_16); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x845, 1, &access); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x846, 2, &limit); BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.base = (base_23_16 << 16) | base_15_0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit = limit; set_ar_byte(BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache, access); if ((BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.value & 0xfffc) == 0) { BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = 0; } else { BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = 1; } if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid==0 || BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment==0) { BX_PANIC(("loadall: SS invalid")); } /* CS */ BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x822, 2, &cs_raw); BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value = cs_raw; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.rpl = (cs_raw & 0x03); cs_raw >>= 2; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.ti = (cs_raw & 0x01); cs_raw >>= 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.index = cs_raw; BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x83c, 2, &base_15_0); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x83e, 1, &base_23_16); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x83f, 1, &access); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x840, 2, &limit); BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = (base_23_16 << 16) | base_15_0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit = limit; set_ar_byte(BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache, access); if ((BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value & 0xfffc) == 0) { BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 0; } else { BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 1; } if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid==0 || BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment==0) { BX_PANIC(("loadall: CS invalid")); } #if BX_SUPPORT_ICACHE BX_CPU_THIS_PTR updateFetchModeMask(); #endif handleCpuModeChange(); /* ES */ BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x824, 2, &es_raw); BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.value = es_raw; BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.rpl = (es_raw & 0x03); es_raw >>= 2; BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.ti = (es_raw & 0x01); es_raw >>= 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.index = es_raw; BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x836, 2, &base_15_0); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x838, 1, &base_23_16); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x839, 1, &access); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x83a, 2, &limit); BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.u.segment.base = (base_23_16 << 16) | base_15_0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.u.segment.limit = limit; set_ar_byte(BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache, access); if ((BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.value & 0xfffc) == 0) { BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.valid = 0; } else { BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.valid = 1; } if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.valid==0 || BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].cache.segment==0) { BX_PANIC(("loadall: ES invalid")); } #if 0 BX_INFO(("cs.dpl = %02x", (unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl)); BX_INFO(("ss.dpl = %02x", (unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl)); BX_INFO(("BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].dpl = 0x%02x", (unsigned) BX_CPU_THIS_PTR ds.cache.dpl)); BX_INFO(("BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].dpl = 0x%02x", (unsigned) BX_CPU_THIS_PTR es.cache.dpl)); BX_INFO(("LOADALL: setting cs.selector.rpl to %u", (unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.rpl)); BX_INFO(("LOADALL: setting ss.selector.rpl to %u", (unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.rpl)); BX_INFO(("LOADALL: setting ds.selector.rpl to %u", (unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.rpl)); BX_INFO(("LOADALL: setting es.selector.rpl to %u", (unsigned) BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.rpl)); #endif BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x826, 2, &DI); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x828, 2, &SI); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x82a, 2, &BP); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x82c, 2, &SP); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x82e, 2, &BX); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x830, 2, &DX); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x832, 2, &CX); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x834, 2, &AX); /* GDTR */ BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x84e, 2, &base_15_0); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x850, 1, &base_23_16); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x851, 1, &access); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x852, 2, &limit); BX_CPU_THIS_PTR gdtr.base = (base_23_16 << 16) | base_15_0; BX_CPU_THIS_PTR gdtr.limit = limit; /* IDTR */ BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x85a, 2, &base_15_0); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x85c, 1, &base_23_16); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x85d, 1, &access); BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, 0x85e, 2, &limit); BX_CPU_THIS_PTR idtr.base = (base_23_16 << 16) | base_15_0; BX_CPU_THIS_PTR idtr.limit = limit; } #endif void BX_CPU_C::handleCpuModeChange(void) { unsigned mode = BX_CPU_THIS_PTR cpu_mode; #if BX_SUPPORT_X86_64 if (BX_CPU_THIS_PTR efer.get_LMA()) { if (! BX_CPU_THIS_PTR cr0.get_PE()) { BX_PANIC(("change_cpu_mode: EFER.LMA is set when CR0.PE=0 !")); } if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l) { BX_CPU_THIS_PTR cpu_mode = BX_MODE_LONG_64; } else { BX_CPU_THIS_PTR cpu_mode = BX_MODE_LONG_COMPAT; if (BX_CPU_THIS_PTR gen_reg[BX_64BIT_REG_RIP].dword.hrx != 0) { BX_PANIC(("handleCpuModeChange: leaving long mode with RIP upper != 0 !")); } } } else #endif { if (BX_CPU_THIS_PTR cr0.get_PE()) { if (BX_CPU_THIS_PTR get_VM()) BX_CPU_THIS_PTR cpu_mode = BX_MODE_IA32_V8086; else BX_CPU_THIS_PTR cpu_mode = BX_MODE_IA32_PROTECTED; } else { BX_CPU_THIS_PTR cpu_mode = BX_MODE_IA32_REAL; } } #if BX_SUPPORT_X86_64 if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64) BX_CPU_THIS_PTR laddr32b_mask = BX_CONST64(0xffffffffffffffff); else BX_CPU_THIS_PTR laddr32b_mask = BX_CONST64(0xffffffff); #endif if (mode != BX_CPU_THIS_PTR cpu_mode) BX_DEBUG(("%s activated", cpu_mode_string(BX_CPU_THIS_PTR cpu_mode))); } #if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK void BX_CPU_C::handleAlignmentCheck(void) { if (CPL == 3 && BX_CPU_THIS_PTR cr0.get_AM() && BX_CPU_THIS_PTR get_AC()) { #if BX_SUPPORT_X86_64 BX_CPU_THIS_PTR alignment_check_mask = BX_CONST64(0xffffffffffffffff); #else BX_CPU_THIS_PTR alignment_check_mask = 0xffffffff; #endif BX_INFO(("Enable alignment check (#AC exception)")); } else { BX_CPU_THIS_PTR alignment_check_mask = LPF_MASK; } } #endif void BX_CPU_C::SetCR0(Bit32u val_32) { bx_bool pe = val_32 & 0x01; bx_bool nw = (val_32 >> 29) & 0x01; bx_bool cd = (val_32 >> 30) & 0x01; bx_bool pg = (val_32 >> 31) & 0x01; if (pg && !pe) { BX_ERROR(("SetCR0: GP(0) when attempt to set CR0.PG with CR0.PE cleared !")); exception(BX_GP_EXCEPTION, 0, 0); } if (nw && !cd) { BX_ERROR(("SetCR0: GP(0) when attempt to set CR0.NW with CR0.CD cleared !")); exception(BX_GP_EXCEPTION, 0, 0); } if (pe && BX_CPU_THIS_PTR get_VM()) BX_PANIC(("EFLAGS.VM=1, enter_PM")); // from either MOV_CdRd() or debug functions // protection checks made already or forcing from debug Bit32u oldCR0 = BX_CPU_THIS_PTR cr0.getRegister(); #if BX_SUPPORT_X86_64 bx_bool prev_pg = BX_CPU_THIS_PTR cr0.get_PG(); if (prev_pg==0 && pg) { if (BX_CPU_THIS_PTR efer.get_LME()) { if (!BX_CPU_THIS_PTR cr4.get_PAE()) { BX_ERROR(("SetCR0: attempt to enter x86-64 long mode without enabling CR4.PAE !")); exception(BX_GP_EXCEPTION, 0, 0); } if (BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l) { BX_ERROR(("SetCR0: attempt to enter x86-64 long mode with CS.L !")); exception(BX_GP_EXCEPTION, 0, 0); } BX_CPU_THIS_PTR efer.set_LMA(1); } } else if (prev_pg==1 && ! pg) { if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64) { BX_ERROR(("SetCR0: attempt to leave 64 bit mode directly to legacy mode !")); exception(BX_GP_EXCEPTION, 0, 0); } if (BX_CPU_THIS_PTR efer.get_LMA()) { if (BX_CPU_THIS_PTR gen_reg[BX_64BIT_REG_RIP].dword.hrx != 0) { BX_PANIC(("SetCR0: attempt to leave x86-64 LONG mode with RIP upper != 0 !!!")); } BX_CPU_THIS_PTR efer.set_LMA(0); } } #endif // #if BX_SUPPORT_X86_64 // handle reserved bits behaviour #if BX_CPU_LEVEL == 3 val_32 = val_32 | 0x7ffffff0; #elif BX_CPU_LEVEL == 4 val_32 = (val_32 | 0x00000010) & 0xe005003f; #elif BX_CPU_LEVEL == 5 val_32 = val_32 | 0x00000010; #elif BX_CPU_LEVEL == 6 val_32 = (val_32 | 0x00000010) & 0xe005003f; #else #error "SetCR0: implement reserved bits behaviour for this CPU_LEVEL" #endif BX_CPU_THIS_PTR cr0.setRegister(val_32); #if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK handleAlignmentCheck(); #endif handleCpuModeChange(); // Give the paging unit a chance to look for changes in bits // it cares about, like {PG,PE}, so it can flush cache entries etc. pagingCR0Changed(oldCR0, val_32); } #if BX_CPU_LEVEL >= 4 bx_bool BX_CPU_C::SetCR4(Bit32u val_32) { Bit32u oldCR4 = BX_CPU_THIS_PTR cr4.getRegister(); Bit32u allowMask = 0; // CR4 bits definitions: // [31-19] Reserved, Must be Zero // [18] OSXSAVE: Operating System XSAVE Support R/W // [17-15] Reserved, Must be Zero // [14] SMXE: SMX Extensions R/W // [13] VMXE: VMX Extensions R/W // [12-11] Reserved, Must be Zero // [10] OSXMMEXCPT: Operating System Unmasked Exception Support R/W // [9] OSFXSR: Operating System FXSAVE/FXRSTOR Support R/W // [8] PCE: Performance-Monitoring Counter Enable R/W // [7] PGE: Page-Global Enable R/W // [6] MCE: Machine Check Enable R/W // [5] PAE: Physical-Address Extension R/W // [4] PSE: Page Size Extensions R/W // [3] DE: Debugging Extensions R/W // [2] TSD: Time Stamp Disable R/W // [1] PVI: Protected-Mode Virtual Interrupts R/W // [0] VME: Virtual-8086 Mode Extensions R/W #if BX_SUPPORT_VME allowMask |= (1<<0) | (1<<1); /* VME */ #endif #if BX_CPU_LEVEL >= 5 allowMask |= (1<<2); /* TSD */ #endif allowMask |= (1<<3); /* DE */ #if BX_SUPPORT_LARGE_PAGES allowMask |= (1<<4); #endif #if BX_SUPPORT_PAE allowMask |= (1<<5); #endif #if BX_CPU_LEVEL >= 5 // NOTE: exception 18 (#MC) never appears in Bochs allowMask |= (1<<6); /* MCE */ #endif #if BX_SUPPORT_GLOBAL_PAGES allowMask |= (1<<7); #endif #if BX_CPU_LEVEL >= 6 allowMask |= (1<<8); /* PCE */ allowMask |= (1<<9); /* OSFXSR */ #endif #if BX_SUPPORT_SSE allowMask |= (1<<10); /* OSXMMECPT */ #endif #if BX_SUPPORT_XSAVE allowMask |= (1<<18); /* OSXSAVE */ #endif #if BX_SUPPORT_X86_64 // need to GP(0) if LMA=1 and PAE=1->0 if ((BX_CPU_THIS_PTR efer.get_LMA()) && (!(val_32 >> 5) & 1) && (BX_CPU_THIS_PTR cr4.get_PAE())) { BX_ERROR(("SetCR4: attempt to change PAE when EFER.LMA=1")); return 0; } #endif // Need to GPF if trying to set undefined bits. if (val_32 & ~allowMask) { BX_ERROR(("#GP(0): SetCR4: Write of 0x%08x not supported (allowMask=0x%x)", val_32, allowMask)); return 0; } val_32 &= allowMask; // Screen out unsupported bits. (not needed, for good measure) BX_CPU_THIS_PTR cr4.setRegister(val_32); pagingCR4Changed(oldCR4, BX_CPU_THIS_PTR cr4.getRegister()); return 1; } #endif void BX_CPP_AttrRegparmN(1) BX_CPU_C::RDPMC(bxInstruction_c *i) { /* We need to be Pentium with MMX or later */ #if ((BX_CPU_LEVEL >= 6) || (BX_SUPPORT_MMX && BX_CPU_LEVEL == 5)) bx_bool pce = BX_CPU_THIS_PTR cr4.get_PCE(); if ((pce==1) || (CPL==0) || real_mode()) { /* According to manual, Pentium 4 has 18 counters, * previous versions have two. And the P4 also can do * short read-out (EDX always 0). Otherwise it is * limited to 40 bits. */ #if (BX_CPU_LEVEL == 6 && BX_SUPPORT_SSE >= 2) // Pentium 4 processor (see cpuid.cc) if ((ECX & 0x7fffffff) >= 18) exception(BX_GP_EXCEPTION, 0, 0); #else // if ((ECX & 0xffffffff) >= 2) exception(BX_GP_EXCEPTION, 0, 0); #endif // Most counters are for hardware specific details, which // we anyhow do not emulate (like pipeline stalls etc) // Could be interesting to count number of memory reads, // writes. Misaligned etc... But to monitor bochs, this // is easier done from the host. RAX = 0; RDX = 0; // if P4 and ECX & 0x10000000, then always 0 (short read 32 bits) BX_ERROR(("RDPMC: Performance Counters Support not reasonably implemented yet")); } else { // not allowed to use RDPMC! exception(BX_GP_EXCEPTION, 0, 0); } #else UndefinedOpcode(i); #endif } #if BX_CPU_LEVEL >= 5 Bit64u BX_CPU_C::get_TSC(void) { return bx_pc_system.time_ticks() - BX_CPU_THIS_PTR msr.tsc_last_reset; } void BX_CPU_C::set_TSC(Bit32u newval) { // compute the correct setting of tsc_last_reset so that a get_TSC() // will return newval BX_CPU_THIS_PTR msr.tsc_last_reset = bx_pc_system.time_ticks() - (Bit64u) newval; // verify BX_ASSERT (get_TSC() == (Bit64u) newval); } #endif void BX_CPP_AttrRegparmN(1) BX_CPU_C::RDTSC(bxInstruction_c *i) { #if BX_CPU_LEVEL >= 5 bx_bool tsd = BX_CPU_THIS_PTR cr4.get_TSD(); if ((tsd==0) || (tsd==1 && CPL==0)) { // return ticks Bit64u ticks = BX_CPU_THIS_PTR get_TSC(); RAX = (Bit32u) (ticks & 0xffffffff); RDX = (Bit32u) ((ticks >> 32) & 0xffffffff); } else { // not allowed to use RDTSC! BX_ERROR(("RDTSC: incorrect usage of RDTSC instruction !")); exception(BX_GP_EXCEPTION, 0, 0); } #else BX_INFO(("RDTSC: Pentium CPU required, use --enable-cpu=5")); UndefinedOpcode(i); #endif } #if BX_SUPPORT_X86_64 void BX_CPP_AttrRegparmN(1) BX_CPU_C::RDTSCP(bxInstruction_c *i) { RDTSC(i); RCX = MSR_TSC_AUX; } #endif void BX_CPP_AttrRegparmN(1) BX_CPU_C::RDMSR(bxInstruction_c *i) { #if BX_CPU_LEVEL >= 5 if (!real_mode() && CPL!=0) { BX_ERROR(("RDMSR: CPL!=0 not in real mode")); exception(BX_GP_EXCEPTION, 0, 0); } /* We have the requested MSR register in ECX */ switch(ECX) { #if BX_SUPPORT_SEP case BX_MSR_SYSENTER_CS: RAX = BX_CPU_THIS_PTR msr.sysenter_cs_msr; RDX = 0; return; case BX_MSR_SYSENTER_ESP: RAX = BX_CPU_THIS_PTR msr.sysenter_esp_msr; RDX = 0; return; case BX_MSR_SYSENTER_EIP: RAX = BX_CPU_THIS_PTR msr.sysenter_eip_msr; RDX = 0; return; #endif #if BX_SUPPORT_MTRR case BX_MSR_MTRRCAP: // read only MSR RAX = 0x508; RDX = 0; return; case BX_MSR_MTRRPHYSBASE0: case BX_MSR_MTRRPHYSMASK0: case BX_MSR_MTRRPHYSBASE1: case BX_MSR_MTRRPHYSMASK1: case BX_MSR_MTRRPHYSBASE2: case BX_MSR_MTRRPHYSMASK2: case BX_MSR_MTRRPHYSBASE3: case BX_MSR_MTRRPHYSMASK3: case BX_MSR_MTRRPHYSBASE4: case BX_MSR_MTRRPHYSMASK4: case BX_MSR_MTRRPHYSBASE5: case BX_MSR_MTRRPHYSMASK5: case BX_MSR_MTRRPHYSBASE6: case BX_MSR_MTRRPHYSMASK6: case BX_MSR_MTRRPHYSBASE7: case BX_MSR_MTRRPHYSMASK7: RAX = BX_CPU_THIS_PTR msr.mtrrphys[ECX - BX_MSR_MTRRPHYSBASE0] & 0xffffffff; RDX = BX_CPU_THIS_PTR msr.mtrrphys[ECX - BX_MSR_MTRRPHYSBASE0] >> 32; return; case BX_MSR_MTRRFIX64K_00000: RAX = BX_CPU_THIS_PTR msr.mtrrfix64k_00000 & 0xffffffff; RDX = BX_CPU_THIS_PTR msr.mtrrfix64k_00000 >> 32; return; case BX_MSR_MTRRFIX16K_80000: RAX = BX_CPU_THIS_PTR msr.mtrrfix16k_80000 & 0xffffffff; RDX = BX_CPU_THIS_PTR msr.mtrrfix16k_80000 >> 32; return; case BX_MSR_MTRRFIX16K_A0000: RAX = BX_CPU_THIS_PTR msr.mtrrfix16k_a0000 & 0xffffffff; RAX = BX_CPU_THIS_PTR msr.mtrrfix16k_a0000 >> 32; return; case BX_MSR_MTRRFIX4K_C0000: case BX_MSR_MTRRFIX4K_C8000: case BX_MSR_MTRRFIX4K_D0000: case BX_MSR_MTRRFIX4K_D8000: case BX_MSR_MTRRFIX4K_E0000: case BX_MSR_MTRRFIX4K_E8000: case BX_MSR_MTRRFIX4K_F0000: case BX_MSR_MTRRFIX4K_F8000: RAX = BX_CPU_THIS_PTR msr.mtrrfix4k[ECX - BX_MSR_MTRRFIX4K_C0000] & 0xffffffff; RDX = BX_CPU_THIS_PTR msr.mtrrfix4k[ECX - BX_MSR_MTRRFIX4K_C0000] >> 32; return; case BX_MSR_PAT: RAX = BX_CPU_THIS_PTR msr.pat & 0xffffffff; RDX = BX_CPU_THIS_PTR msr.pat >> 32; return; case BX_MSR_MTRR_DEFTYPE: RAX = BX_CPU_THIS_PTR msr.mtrr_deftype; RDX = 0; return; #endif #if BX_CPU_LEVEL == 5 /* The following registers are defined for Pentium only */ case BX_MSR_P5_MC_ADDR: case BX_MSR_MC_TYPE: /* TODO */ return; case BX_MSR_CESR: /* TODO */ return; #else /* These are noops on i686... */ case BX_MSR_P5_MC_ADDR: case BX_MSR_MC_TYPE: /* do nothing */ return; /* ... And these cause an exception on i686 */ case BX_MSR_CESR: case BX_MSR_CTR0: case BX_MSR_CTR1: exception(BX_GP_EXCEPTION, 0, 0); #endif /* BX_CPU_LEVEL == 5 */ case BX_MSR_TSC: RDTSC(i); return; /* MSR_APICBASE 0:7 Reserved 8 This is set if its the BSP 9:10 Reserved 11 APIC Global Enable bit (1=enabled 0=disabled) 12:35 APIC Base Address 36:63 Reserved */ #if BX_SUPPORT_APIC case BX_MSR_APICBASE: RAX = BX_CPU_THIS_PTR msr.apicbase; RDX = 0; BX_INFO(("RDMSR: Read %08x:%08x from MSR_APICBASE", EDX, EAX)); return; #endif #if BX_SUPPORT_X86_64 case BX_MSR_EFER: RAX = BX_CPU_THIS_PTR efer.getRegister(); RDX = 0; return; case BX_MSR_STAR: RAX = MSR_STAR & 0xffffffff; RDX = MSR_STAR >> 32; return; case BX_MSR_LSTAR: RAX = MSR_LSTAR & 0xffffffff; RDX = MSR_LSTAR >> 32; return; case BX_MSR_CSTAR: RAX = MSR_CSTAR & 0xffffffff; RDX = MSR_CSTAR >> 32; return; case BX_MSR_FMASK: RAX = MSR_FMASK & 0xffffffff; RDX = MSR_FMASK >> 32; return; case BX_MSR_FSBASE: RAX = MSR_FSBASE & 0xffffffff; RDX = MSR_FSBASE >> 32; return; case BX_MSR_GSBASE: RAX = MSR_GSBASE & 0xffffffff; RDX = MSR_GSBASE >> 32; return; case BX_MSR_KERNELGSBASE: RAX = MSR_KERNELGSBASE & 0xffffffff; RDX = MSR_KERNELGSBASE >> 32; return; case BX_MSR_TSC_AUX: RAX = MSR_TSC_AUX; // 32 bit MSR RDX = 0; return; #endif // #if BX_SUPPORT_X86_64 default: BX_ERROR(("RDMSR: Unknown register %#x", ECX)); #if BX_IGNORE_BAD_MSR RAX = 0; RDX = 0; return; #endif } exception(BX_GP_EXCEPTION, 0, 0); #else /* BX_CPU_LEVEL >= 5 */ BX_INFO(("RDMSR: Pentium CPU required, use --enable-cpu-level=5")); UndefinedOpcode(i); #endif } void BX_CPP_AttrRegparmN(1) BX_CPU_C::WRMSR(bxInstruction_c *i) { #if BX_CPU_LEVEL >= 5 if (!real_mode() && CPL!=0) { BX_ERROR(("WRMSR: CPL!=0 not in real mode")); exception(BX_GP_EXCEPTION, 0, 0); } Bit64u val64 = ((Bit64u) EDX << 32) + EAX; BX_INSTR_WRMSR(BX_CPU_ID, ECX, val64); /* ECX has the MSR to write to */ switch(ECX) { #if BX_SUPPORT_SEP case BX_MSR_SYSENTER_CS: { BX_CPU_THIS_PTR msr.sysenter_cs_msr = EAX; return; } case BX_MSR_SYSENTER_ESP: BX_CPU_THIS_PTR msr.sysenter_esp_msr = EAX; return; case BX_MSR_SYSENTER_EIP: BX_CPU_THIS_PTR msr.sysenter_eip_msr = EAX; return; #endif #if BX_SUPPORT_MTRR case BX_MSR_MTRRCAP: BX_ERROR(("WRMSR: MTRRCAP is read only MSR")); exception(BX_GP_EXCEPTION, 0, 0); case BX_MSR_MTRRPHYSBASE0: case BX_MSR_MTRRPHYSMASK0: case BX_MSR_MTRRPHYSBASE1: case BX_MSR_MTRRPHYSMASK1: case BX_MSR_MTRRPHYSBASE2: case BX_MSR_MTRRPHYSMASK2: case BX_MSR_MTRRPHYSBASE3: case BX_MSR_MTRRPHYSMASK3: case BX_MSR_MTRRPHYSBASE4: case BX_MSR_MTRRPHYSMASK4: case BX_MSR_MTRRPHYSBASE5: case BX_MSR_MTRRPHYSMASK5: case BX_MSR_MTRRPHYSBASE6: case BX_MSR_MTRRPHYSMASK6: case BX_MSR_MTRRPHYSBASE7: case BX_MSR_MTRRPHYSMASK7: BX_CPU_THIS_PTR msr.mtrrphys[ECX - BX_MSR_MTRRPHYSBASE0] = ((Bit64u) EDX << 32) + EAX; return; case BX_MSR_MTRRFIX64K_00000: BX_CPU_THIS_PTR msr.mtrrfix64k_00000 = val64; return; case BX_MSR_MTRRFIX16K_80000: BX_CPU_THIS_PTR msr.mtrrfix16k_80000 = val64; return; case BX_MSR_MTRRFIX16K_A0000: BX_CPU_THIS_PTR msr.mtrrfix16k_a0000 = val64; return; case BX_MSR_MTRRFIX4K_C0000: case BX_MSR_MTRRFIX4K_C8000: case BX_MSR_MTRRFIX4K_D0000: case BX_MSR_MTRRFIX4K_D8000: case BX_MSR_MTRRFIX4K_E0000: case BX_MSR_MTRRFIX4K_E8000: case BX_MSR_MTRRFIX4K_F0000: case BX_MSR_MTRRFIX4K_F8000: BX_CPU_THIS_PTR msr.mtrrfix4k[ECX - BX_MSR_MTRRFIX4K_C0000] = val64; return; case BX_MSR_PAT: BX_CPU_THIS_PTR msr.pat = val64; return; case BX_MSR_MTRR_DEFTYPE: BX_CPU_THIS_PTR msr.mtrr_deftype = EAX; return; #endif #if BX_CPU_LEVEL == 5 /* The following registers are defined for Pentium only */ case BX_MSR_P5_MC_ADDR: case BX_MSR_MC_TYPE: case BX_MSR_CESR: /* TODO */ return; #else /* These are noops on i686... */ case BX_MSR_P5_MC_ADDR: case BX_MSR_MC_TYPE: /* do nothing */ return; /* ... And these cause an exception on i686 */ case BX_MSR_CESR: case BX_MSR_CTR0: case BX_MSR_CTR1: exception(BX_GP_EXCEPTION, 0, 0); #endif /* BX_CPU_LEVEL == 5 */ case BX_MSR_TSC: BX_CPU_THIS_PTR set_TSC(EAX); /* ignore the high 32bits */ BX_INFO(("WRMSR: wrote 0x%08x to MSR_TSC", EAX)); return; /* MSR_APICBASE 0:7 Reserved 8 This is set if its the BSP 9:10 Reserved 11 APIC Global Enable bit (1=enabled 0=disabled) 12:35 APIC Base Address (in Bochs 12:31 because of 32-bit physical addr) 36:63 Reserved */ #if BX_SUPPORT_APIC case BX_MSR_APICBASE: if (BX_CPU_THIS_PTR msr.apicbase & 0x800) { BX_INFO(("WRMSR: wrote %08x:%08x to MSR_APICBASE", EDX, EAX)); BX_CPU_THIS_PTR msr.apicbase = EAX; /* ignore the high 32bits */ if (EDX != 0) { BX_PANIC(("MSR_APICBASE: Only 32 bit physical address space is emulated !")); } BX_CPU_THIS_PTR local_apic.set_base(BX_CPU_THIS_PTR msr.apicbase); // TLB flush is required for emulation correctness TLB_flush(1); // don't care about performance of apic relocation } else { BX_INFO(("WRMSR: MSR_APICBASE APIC global enable bit cleared !")); } return; #endif #if BX_SUPPORT_X86_64 case BX_MSR_EFER: // #GP(0) if changing EFER.LME when cr0.pg = 1 if ((BX_CPU_THIS_PTR efer.get_LME() != ((EAX >> 8) & 1)) && BX_CPU_THIS_PTR cr0.get_PG()) { BX_ERROR(("WRMSR: attempt to change LME when CR0.PG=1")); exception(BX_GP_EXCEPTION, 0, 0); } BX_CPU_THIS_PTR efer.setRegister((EAX & BX_EFER_SUPPORTED_BITS & ~BX_EFER_LMA_MASK) | (BX_CPU_THIS_PTR efer.val32 & BX_EFER_LMA_MASK)); // keep LMA untouched return; case BX_MSR_STAR: MSR_STAR = val64; return; case BX_MSR_LSTAR: MSR_LSTAR = val64; return; case BX_MSR_CSTAR: MSR_CSTAR = val64; return; case BX_MSR_FMASK: MSR_FMASK = val64; return; case BX_MSR_FSBASE: MSR_FSBASE = val64; return; case BX_MSR_GSBASE: MSR_GSBASE = val64; return; case BX_MSR_KERNELGSBASE: MSR_KERNELGSBASE = val64; return; case BX_MSR_TSC_AUX: MSR_TSC_AUX = EAX; return; #endif // #if BX_SUPPORT_X86_64 default: BX_ERROR(("WRMSR: Unknown register %#x", ECX)); #if BX_IGNORE_BAD_MSR return; #endif } exception(BX_GP_EXCEPTION, 0, 0); #else /* BX_CPU_LEVEL >= 5 */ BX_INFO(("WRMSR: Pentium CPU required, use --enable-cpu-level=5")); UndefinedOpcode(i); #endif } #if BX_SUPPORT_MONITOR_MWAIT bx_bool BX_CPU_C::is_monitor(bx_phy_address begin_addr, unsigned len) { bx_phy_address end_addr = begin_addr + len; if (begin_addr >= BX_CPU_THIS_PTR monitor.monitor_end || end_addr <= BX_CPU_THIS_PTR monitor.monitor_begin) return 0; else return 1; } void BX_CPU_C::check_monitor(bx_phy_address begin_addr, unsigned len) { if (is_monitor(begin_addr, len)) { // wakeup from MWAIT state BX_ASSERT(BX_CPU_THIS_PTR debug_trap & BX_DEBUG_TRAP_MWAIT); BX_CPU_THIS_PTR debug_trap &= ~BX_DEBUG_TRAP_SPECIAL; // clear monitor BX_CPU_THIS_PTR mem->clear_monitor(BX_CPU_THIS_PTR bx_cpuid); } } #endif void BX_CPP_AttrRegparmN(1) BX_CPU_C::MONITOR(bxInstruction_c *i) { #if BX_SUPPORT_MONITOR_MWAIT // TODO: #UD when CPL > 0 and // MSR 0xC0010015[MONITOR_MWAIT_USER_UNABLE] = 1 BX_DEBUG(("MONITOR instruction executed EAX = 0x08x", (unsigned) EAX)); if (RCX != 0) { BX_ERROR(("MONITOR: no optional extensions supported")); exception(BX_GP_EXCEPTION, 0, 0); } bx_address offset, laddr; bx_phy_address paddr; #if BX_SUPPORT_X86_64 if (i->as64L()) { offset = RAX; } else #endif if (i->as32L()) { offset = EAX; } else { offset = AX; } read_virtual_checks(&BX_CPU_THIS_PTR sregs[i->seg()], offset, 1); // set MONITOR laddr = BX_CPU_THIS_PTR get_laddr(i->seg(), offset); if (BX_CPU_THIS_PTR cr0.get_PG()) { paddr = dtranslate_linear(laddr, CPL, BX_READ); paddr = A20ADDR(paddr); } else { paddr = A20ADDR(laddr); } BX_CPU_THIS_PTR monitor.monitor_begin = paddr; BX_CPU_THIS_PTR monitor.monitor_end = paddr + CACHE_LINE_SIZE; #else BX_INFO(("MONITOR: use --enable-monitor-mwait to enable MONITOR/MWAIT support")); UndefinedOpcode (i); #endif } void BX_CPP_AttrRegparmN(1) BX_CPU_C::MWAIT(bxInstruction_c *i) { #if BX_SUPPORT_MONITOR_MWAIT // TODO: #UD when CPL > 0 and // MSR 0xC0010015[MONITOR_MWAIT_USER_UNABLE] = 1 BX_DEBUG(("MWAIT instruction executed ECX = 0x%08x", ECX)); // only one extension is supported // ECX[0] - interrupt MWAIT even if EFLAGS.IF = 0 if (RCX & ~(BX_CONST64(1))) { BX_ERROR(("MWAIT: incorrect optional extensions in RCX")); exception(BX_GP_EXCEPTION, 0, 0); } // Do not enter optimized state if MONITOR wasn't properly set if (BX_CPU_THIS_PTR monitor.monitor_begin == BX_CPU_THIS_PTR monitor.monitor_end) { BX_ERROR(("MWAIT: incorrect MONITOR settings")); return; } bx_pc_system.invlpg(BX_CPU_THIS_PTR monitor.monitor_begin); if ((BX_CPU_THIS_PTR monitor.monitor_end & ~0xfff) != (BX_CPU_THIS_PTR monitor.monitor_begin & ~0xfff)) bx_pc_system.invlpg(BX_CPU_THIS_PTR monitor.monitor_end); BX_DEBUG(("MWAIT for phys_addr=%08x", BX_CPU_THIS_PTR monitor.monitor_begin)); BX_CPU_THIS_PTR mem->set_monitor(BX_CPU_THIS_PTR bx_cpuid); // stops instruction execution and places the processor in a optimized // state. Events that cause exit from MWAIT state are: // A store from another processor to monitored range, any unmasked // interrupt, including INTR, NMI, SMI, INIT or reset will resume // the execution. Any far control transfer between MONITOR and MWAIT // resets the monitoring logic. // artificial trap bit, why use another variable. BX_CPU_THIS_PTR debug_trap |= BX_DEBUG_TRAP_MWAIT; // artificial trap if (ECX & 1) BX_CPU_THIS_PTR debug_trap |= BX_DEBUG_TRAP_MWAIT_IF; BX_CPU_THIS_PTR async_event = 1; // so processor knows to check // Execution of this instruction completes. The processor // will remain in a optimized state until one of the above // conditions is met. BX_INSTR_MWAIT(BX_CPU_ID, BX_CPU_THIS_PTR monitor.monitor_begin, CACHE_LINE_SIZE, ECX); #if BX_USE_IDLE_HACK bx_gui->sim_is_idle(); #endif #else BX_INFO(("MWAIT: use --enable-monitor-mwait to enable MONITOR/MWAIT support")); UndefinedOpcode (i); #endif } void BX_CPP_AttrRegparmN(1) BX_CPU_C::SYSENTER(bxInstruction_c *i) { #if BX_SUPPORT_SEP if (!protected_mode()) { BX_ERROR(("SYSENTER not from protected mode !")); exception(BX_GP_EXCEPTION, 0, 0); } if ((BX_CPU_THIS_PTR msr.sysenter_cs_msr & BX_SELECTOR_RPL_MASK) == 0) { BX_ERROR(("SYSENTER with zero sysenter_cs_msr !")); exception(BX_GP_EXCEPTION, 0, 0); } invalidate_prefetch_q(); BX_CPU_THIS_PTR clear_VM(); // do this just like the book says to do BX_CPU_THIS_PTR clear_IF(); BX_CPU_THIS_PTR clear_RF(); parse_selector(BX_CPU_THIS_PTR msr.sysenter_cs_msr & BX_SELECTOR_RPL_MASK, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_CODE_EXEC_READ_ACCESSED; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; // base address BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit = 0xFFFF; // segment limit BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; // scaled segment limit BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; // 4k granularity BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 1; // 32-bit mode BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; // available for use by system #if BX_SUPPORT_ICACHE BX_CPU_THIS_PTR updateFetchModeMask(); #endif #if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK BX_CPU_THIS_PTR alignment_check_mask = LPF_MASK; // CPL=0 #endif parse_selector((BX_CPU_THIS_PTR msr.sysenter_cs_msr + 8) & BX_SELECTOR_RPL_MASK, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.base = 0; // base address BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit = 0xFFFF; // segment limit BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit_scaled = 0xFFFFFFFF; // scaled segment limit BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.g = 1; // 4k granularity BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.d_b = 1; // 32-bit mode BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.avl = 0; // available for use by system ESP = BX_CPU_THIS_PTR msr.sysenter_esp_msr; EIP = BX_CPU_THIS_PTR msr.sysenter_eip_msr; BX_INSTR_FAR_BRANCH(BX_CPU_ID, BX_INSTR_IS_SYSENTER, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, EIP); #else BX_INFO(("SYSENTER: use --enable-sep to enable SYSENTER/SYSEXIT support")); UndefinedOpcode (i); #endif } void BX_CPP_AttrRegparmN(1) BX_CPU_C::SYSEXIT(bxInstruction_c *i) { #if BX_SUPPORT_SEP if (!protected_mode()) { BX_ERROR(("SYSEXIT not from protected mode !")); exception(BX_GP_EXCEPTION, 0, 0); } if ((BX_CPU_THIS_PTR msr.sysenter_cs_msr & BX_SELECTOR_RPL_MASK) == 0) { BX_ERROR(("SYSEXIT with zero sysenter_cs_msr !")); exception(BX_GP_EXCEPTION, 0, 0); } if (CPL != 0) { BX_ERROR(("SYSEXIT at non-zero cpl %u !", CPL)); exception(BX_GP_EXCEPTION, 0, 0); } invalidate_prefetch_q(); parse_selector((BX_CPU_THIS_PTR msr.sysenter_cs_msr + 16) | 3, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 3; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_CODE_EXEC_READ_ACCESSED; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; // base address BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit = 0xFFFF; // segment limit BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; // scaled segment limit BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; // 4k granularity BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 1; // 32-bit mode BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; // available for use by system #if BX_SUPPORT_ICACHE BX_CPU_THIS_PTR updateFetchModeMask(); #endif #if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK handleAlignmentCheck(); // CPL was modified #endif parse_selector((BX_CPU_THIS_PTR msr.sysenter_cs_msr + 24) | 3, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 3; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.base = 0; // base address BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit = 0xFFFF; // segment limit BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit_scaled = 0xFFFFFFFF; // scaled segment limit BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.g = 1; // 4k granularity BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.d_b = 1; // 32-bit mode BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.avl = 0; // available for use by system ESP = ECX; EIP = EDX; BX_INSTR_FAR_BRANCH(BX_CPU_ID, BX_INSTR_IS_SYSEXIT, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, EIP); #else BX_INFO(("SYSEXIT: use --enable-sep to enable SYSENTER/SYSEXIT support")); UndefinedOpcode (i); #endif } #if BX_SUPPORT_X86_64 void BX_CPP_AttrRegparmN(1) BX_CPU_C::SYSCALL(bxInstruction_c *i) { bx_address temp_RIP; BX_DEBUG(("Execute SYSCALL instruction")); if (!BX_CPU_THIS_PTR efer.get_SCE()) { exception(BX_UD_EXCEPTION, 0, 0); } invalidate_prefetch_q(); if (BX_CPU_THIS_PTR efer.get_LMA()) { RCX = RIP; R11 = read_eflags() & ~(EFlagsRFMask); if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64) { temp_RIP = MSR_LSTAR; } else { temp_RIP = MSR_CSTAR; } // set up CS segment, flat, 64-bit DPL=0 parse_selector((MSR_STAR >> 32) & BX_SELECTOR_RPL_MASK, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_CODE_EXEC_READ_ACCESSED; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; /* base address */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit = 0xFFFF; /* segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; /* 4k granularity */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 1; /* 64-bit code */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; /* available for use by system */ #if BX_SUPPORT_ICACHE BX_CPU_THIS_PTR updateFetchModeMask(); #endif #if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK BX_CPU_THIS_PTR alignment_check_mask = LPF_MASK; // CPL=0 #endif // set up SS segment, flat, 64-bit DPL=0 parse_selector(((MSR_STAR >> 32) + 8) & BX_SELECTOR_RPL_MASK, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.base = 0; /* base address */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit = 0xFFFF; /* segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.g = 1; /* 4k granularity */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.d_b = 1; /* 32 bit stack */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.l = 0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.avl = 0; /* available for use by system */ writeEFlags(read_eflags() & (~MSR_FMASK), EFlagsValidMask); BX_CPU_THIS_PTR clear_RF(); RIP = temp_RIP; } else { // legacy mode ECX = EIP; temp_RIP = MSR_STAR & 0xFFFFFFFF; // set up CS segment, flat, 32-bit DPL=0 parse_selector((MSR_STAR >> 32) & BX_SELECTOR_RPL_MASK, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_CODE_EXEC_READ_ACCESSED; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; /* base address */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit = 0xFFFF; /* segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; /* 4k granularity */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 0; /* 32-bit code */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; /* available for use by system */ #if BX_SUPPORT_ICACHE BX_CPU_THIS_PTR updateFetchModeMask(); #endif #if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK BX_CPU_THIS_PTR alignment_check_mask = LPF_MASK; // CPL=0 #endif // set up SS segment, flat, 32-bit DPL=0 parse_selector(((MSR_STAR >> 32) + 8) & BX_SELECTOR_RPL_MASK, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.base = 0; /* base address */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit = 0xFFFF; /* segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.g = 1; /* 4k granularity */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.d_b = 1; /* 32 bit stack */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.l = 0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.u.segment.avl = 0; /* available for use by system */ BX_CPU_THIS_PTR clear_VM(); BX_CPU_THIS_PTR clear_IF(); BX_CPU_THIS_PTR clear_RF(); RIP = temp_RIP; } BX_INSTR_FAR_BRANCH(BX_CPU_ID, BX_INSTR_IS_SYSCALL, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, RIP); } void BX_CPP_AttrRegparmN(1) BX_CPU_C::SYSRET(bxInstruction_c *i) { bx_address temp_RIP; BX_DEBUG(("Execute SYSRET instruction")); if (!BX_CPU_THIS_PTR efer.get_SCE()) { exception(BX_UD_EXCEPTION, 0, 0); } if(real_mode() || CPL != 0) { BX_ERROR(("SYSRET: priveledge check failed, generate #GP(0)")); exception(BX_GP_EXCEPTION, 0, 0); } invalidate_prefetch_q(); if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64) { if (i->os64L()) { // Return to 64-bit mode, set up CS segment, flat, 64-bit DPL=3 parse_selector(((MSR_STAR >> 48) + 16) | 3, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 3; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_CODE_EXEC_READ_ACCESSED; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; /* base address */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit = 0xFFFF; /* segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; /* 4k granularity */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 0; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 1; /* 64-bit code */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; /* available for use by system */ temp_RIP = RCX; } else { // Return to 32-bit compatibility mode, set up CS segment, flat, 32-bit DPL=3 parse_selector((MSR_STAR >> 48) | 3, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 3; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_CODE_EXEC_READ_ACCESSED; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; /* base address */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit = 0xFFFF; /* segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; /* 4k granularity */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 0; /* 32-bit code */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; /* available for use by system */ temp_RIP = ECX; } #if BX_SUPPORT_ICACHE BX_CPU_THIS_PTR updateFetchModeMask(); #endif #if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK handleAlignmentCheck(); // CPL was modified #endif // SS base, limit, attributes unchanged parse_selector((MSR_STAR >> 48) + 8, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 3; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED; writeEFlags((Bit32u) R11, EFlagsValidMask); } else { // (!64BIT_MODE) // Return to 32-bit legacy mode, set up CS segment, flat, 32-bit DPL=3 parse_selector((MSR_STAR >> 48) | 3, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.dpl = 3; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.type = BX_CODE_EXEC_READ_ACCESSED; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base = 0; /* base address */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit = 0xFFFF; /* segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled = 0xFFFFFFFF; /* scaled segment limit */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.g = 1; /* 4k granularity */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.l = 0; /* 32-bit code */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.avl = 0; /* available for use by system */ #if BX_SUPPORT_ICACHE BX_CPU_THIS_PTR updateFetchModeMask(); #endif #if BX_CPU_LEVEL >= 4 && BX_SUPPORT_ALIGNMENT_CHECK handleAlignmentCheck(); // CPL was modified #endif // SS base, limit, attributes unchanged parse_selector((MSR_STAR >> 48) + 8, &BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector); BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.valid = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.p = 1; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.dpl = 3; BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.segment = 1; /* data/code segment */ BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].cache.type = BX_DATA_READ_WRITE_ACCESSED; BX_CPU_THIS_PTR assert_IF(); temp_RIP = ECX; } RIP = temp_RIP; BX_INSTR_FAR_BRANCH(BX_CPU_ID, BX_INSTR_IS_SYSRET, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, RIP); } void BX_CPP_AttrRegparmN(1) BX_CPU_C::SWAPGS(bxInstruction_c *i) { Bit64u temp_GS_base; BX_ASSERT(protected_mode()); if(CPL != 0) exception(BX_GP_EXCEPTION, 0, 0); temp_GS_base = MSR_GSBASE; MSR_GSBASE = MSR_KERNELGSBASE; MSR_KERNELGSBASE = temp_GS_base; } #endif #if BX_X86_DEBUGGER void BX_CPU_C::hwbreakpoint_match(bx_address laddr, unsigned len, unsigned rw) { if (BX_CPU_THIS_PTR dr7 & 0x000000ff) { // Only compare debug registers if any breakpoints are enabled unsigned opa, opb; opa = BX_HWDebugMemRW; // Read or Write always compares vs 11b if (rw==BX_READ) // only compares vs 11b opb = opa; else // BX_WRITE or BX_RW; also compare vs 01b opb = BX_HWDebugMemW; Bit32u dr6_bits = hwdebug_compare(laddr, len, opa, opb); if (dr6_bits) { BX_CPU_THIS_PTR debug_trap |= dr6_bits; BX_CPU_THIS_PTR async_event = 1; } } } Bit32u BX_CPU_C::hwdebug_compare(bx_address laddr_0, unsigned size, unsigned opa, unsigned opb) { // Support x86 hardware debug facilities (DR0..DR7) Bit32u dr7 = BX_CPU_THIS_PTR dr7; bx_bool ibpoint_found = 0; bx_address laddr_n = laddr_0 + (size - 1); static bx_address alignment_mask[4] = // 00b=1 01b=2 10b=undef 11b=4 { 0x0, 0x1, 0x0, 0x3 }; Bit32u len0 = (dr7>>18) & 3; Bit32u len1 = (dr7>>22) & 3; Bit32u len2 = (dr7>>26) & 3; Bit32u len3 = (dr7>>30) & 3; bx_address dr0 = (BX_CPU_THIS_PTR dr0) & ~(alignment_mask[len0]); bx_address dr1 = (BX_CPU_THIS_PTR dr1) & ~(alignment_mask[len1]); bx_address dr2 = (BX_CPU_THIS_PTR dr2) & ~(alignment_mask[len2]); bx_address dr3 = (BX_CPU_THIS_PTR dr3) & ~(alignment_mask[len3]); bx_address dr0_n = dr0 + len0; bx_address dr1_n = dr1 + len1; bx_address dr2_n = dr2 + len2; bx_address dr3_n = dr3 + len3; Bit32u dr0_op = (dr7>>16) & 3; Bit32u dr1_op = (dr7>>20) & 3; Bit32u dr2_op = (dr7>>24) & 3; Bit32u dr3_op = (dr7>>28) & 3; // See if this instruction address matches any breakpoints if ((dr7 & 0x00000003)) { if ((dr0_op==opa || dr0_op==opb) && (laddr_0 <= dr0_n) && (laddr_n >= dr0)) ibpoint_found = 1; } if ((dr7 & 0x0000000c)) { if ((dr1_op==opa || dr1_op==opb) && (laddr_0 <= dr1_n) && (laddr_n >= dr1)) ibpoint_found = 1; } if ((dr7 & 0x00000030)) { if ((dr2_op==opa || dr2_op==opb) && (laddr_0 <= dr2_n) && (laddr_n >= dr2)) ibpoint_found = 1; } if ((dr7 & 0x000000c0)) { if ((dr3_op==opa || dr3_op==opb) && (laddr_0 <= dr3_n) && (laddr_n >= dr3)) ibpoint_found = 1; } // If *any* enabled breakpoints matched, then we need to // set status bits for *all* breakpoints, even disabled ones, // as long as they meet the other breakpoint criteria. // This code is similar to that above, only without the // breakpoint enabled check. Seems weird to duplicate effort, // but its more efficient to do it this way. if (ibpoint_found) { // dr6_mask is the return value. These bits represent the bits to // be OR'd into DR6 as a result of the debug event. Bit32u dr6_mask=0; if ((dr0_op==opa || dr0_op==opb) && (laddr_0 <= dr0_n) && (laddr_n >= dr0)) dr6_mask |= 0x01; if ((dr1_op==opa || dr1_op==opb) && (laddr_0 <= dr1_n) && (laddr_n >= dr1)) dr6_mask |= 0x02; if ((dr2_op==opa || dr2_op==opb) && (laddr_0 <= dr2_n) && (laddr_n >= dr2)) dr6_mask |= 0x04; if ((dr3_op==opa || dr3_op==opb) && (laddr_0 <= dr3_n) && (laddr_n >= dr3)) dr6_mask |= 0x08; return(dr6_mask); } return(0); } #endif /* void BX_CPP_AttrRegparmN(1) BX_CPU_C::LFENCE(bxInstruction_c *i) {} void BX_CPP_AttrRegparmN(1) BX_CPU_C::MFENCE(bxInstruction_c *i) {} void BX_CPP_AttrRegparmN(1) BX_CPU_C::SFENCE(bxInstruction_c *i) {} */