// Copyright (C) 2001 MandrakeSoft S.A. // // MandrakeSoft S.A. // 43, rue d'Aboukir // 75002 Paris - France // http://www.linux-mandrake.com/ // http://www.mandrakesoft.com/ // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public // License as published by the Free Software Foundation; either // version 2 of the License, or (at your option) any later version. // // This library is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // Lesser General Public License for more details. // // You should have received a copy of the GNU Lesser General Public // License along with this library; if not, write to the Free Software // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // // config.h.in is distributed in the source TAR file. When you run // the configure script, it generates config.h with some changes // according to your build environment. For example, in config.h.in, // SIZEOF_UNSIGNED_CHAR is set to 0. When configure produces config.h // it will change "0" to the detected value for your system. // // config.h contains ONLY preprocessor #defines and a few typedefs. // It must be included by both C and C++ files, so it must not // contain anything language dependent such as a class declaration. // #ifdef _BX_CONFIG_H_ #else #define _BX_CONFIG_H_ 1 /////////////////////////////////////////////////////////////////// // USER CONFIGURABLE OPTIONS : EDIT ONLY OPTIONS IN THIS SECTION // /////////////////////////////////////////////////////////////////// #if 1 // quit_sim is defined in gui/siminterface.h #define BX_EXIT(x) SIM->quit_sim (x) #else // provide the real main and the usual exit. #define BX_EXIT(x) ::exit(x) #endif #define BX_USE_CONFIG_INTERFACE 1 // I have tested the following combinations: // * processors=1, bootstrap=0, ioapic_id=1 (uniprocessor system) // * processors=2, bootstrap=0, ioapic_id=2 // * processors=4, bootstrap=2, ioapic_id=4 #define BX_SMP_PROCESSORS 1 #define BX_BOOTSTRAP_PROCESSOR 0 // choose IOAPIC id to be equal to the number of processors. This leaves // one space for each processor to have an ID, starting with 0. #define BX_IOAPIC_DEFAULT_ID (BX_SMP_PROCESSORS) #define BX_ADDRESS_SPACES 1 // controls how many instances of BX_MEM_C are created. For // SMP, use several processors with one shared memory space. // For cosimulation, you could use two processors and two address // spaces. #define BX_SUPPORT_APIC 0 // include in APIC models, required for a multiprocessor system. #if (BX_SMP_PROCESSORS>1 && !BX_SUPPORT_APIC) #error For multiprocessor simulation, BX_SUPPORT_APIC is required. #endif #define BX_DEBUG_LINUX 0 // if simulating Linux, this provides a few more debugging options // such as tracing all system calls. #define HAVE_LIBREADLINE 0 #define HAVE_READLINE_HISTORY_H 0 // adds support for the GNU readline library in the debugger command // prompt. #define HAVE_LOCALE_H 0 // Define to 1 if you have // I rebuilt the code which provides timers to IO devices. // Setting this to 1 will introduce a little code which // will panic out if cases which shouldn't happen occur. // Set this to 0 for optimal performance. #define BX_TIMER_DEBUG 1 // Settable A20 line. For efficiency, you can disable // having a settable A20 line, eliminating conditional // code for every physical memory access. You'll have // to tell your software not to mess with the A20 line, // and accept it as always being on if you change this. // 1 = use settable A20 line. (normal) // 0 = A20 is like the rest of the address lines #define BX_SUPPORT_A20 1 // Processor Instructions Per Second // To find out what value to use for the 'ips' directive // in your '.bochsrc' file, set BX_SHOW_IPS to 1, and // run the software in bochs you plan to use most. Bochs // will print out periodic IPS ratings. This will change // based on the processor mode at the time, and various // other factors. You'll get a reasonable estimate though. // When you're done, reset BX_SHOW_IPS to 0, do a // 'make all-clean', then 'make' again. #define BX_SHOW_IPS 0 #if (BX_SHOW_IPS) && defined(__MINGW32__) #define SIGALRM 14 #endif // Paging Options: // --------------- // Support Paging mechanism. // 0 = don't support paging at all (DOS & Minix don't require it) // 1 = support paging. (Most other OS's require paging) // Use Translation Lookaside Buffer (TLB) for caching // paging translations. This will make paging mode // more efficient. If you're OS doesn't use paging, // then you won't need either. // 1 = Use a TLB for effiency // 0 = don't use a TLB, walk the page tables for every access // BX_TLB_SIZE: Number of entries in TLB // BX_TLB_INDEX_OF(lpf): This macro is passed the linear page frame // (top 20 bits of the linear address. It must map these bits to // one of the TLB cache slots, given the size of BX_TLB_SIZE. // There will be a many-to-one mapping to each TLB cache slot. // When there are collisions, the old entry is overwritten with // one for the newest access. #define BX_SUPPORT_PAGING 1 #define BX_USE_TLB 1 #define BX_TLB_SIZE 1024 #define BX_TLB_INDEX_OF(lpf) (((lpf) & 0x003ff000) >> 12) #define BX_USE_QUICK_TLB_INVALIDATE 0 // Compile in support for DMA & FLOPPY IO. You'll need this // if you plan to use the floppy drive emulation. But if // you're environment doesn't require it, you can change // it to 0. #define BX_DMA_FLOPPY_IO 1 // Default number of Megs of memory to emulate. The // 'megs:' directive in the '.bochsrc' file overrides this, // allowing per-run settings. #define BX_DEFAULT_MEM_MEGS 4 // CPU level emulation. Default level is set in // the configure script. BX_CPU_LEVEL defines the CPU level // to emulate. BX_CPU_LEVEL_HACKED is a hack to define the // level of some integer instructions, so they can be tested // before the rest of the emulation is up to that level. #define BX_CPU_LEVEL 0 #define BX_CPU_LEVEL_HACKED 0 // emulate x86-64 instruction set? #define BX_SUPPORT_X86_64 0 // Virtual 8086 mode emulation. // 1 = compile in support for v8086 mode. // 0 = don't compile in support for v8086 mode. #define BX_SUPPORT_V8086_MODE 1 // Defines if the simulation should reset on triple fault // if set to 0, the simulation will panic. #define BX_RESET_ON_TRIPLE_FAULT 1 // Support shadowing of ROM from C0000 to FFFFF. // This allows that region to be written to. #define BX_SHADOW_RAM 0 // Number of CMOS registers #define BX_NUM_CMOS_REGS 64 //#define BX_NUM_CMOS_REGS 128 // Use Greg Alexander's new PIT model (summer 2001) instead of the original. #define BX_USE_NEW_PIT 0 #define BX_USE_SLOWDOWN_TIMER 0 #define BX_HAVE_SLEEP 0 #define BX_HAVE_MSLEEP 0 #define BX_HAVE_USLEEP 0 #define BX_HAVE_NANOSLEEP 0 #define BX_HAVE_ABORT 0 #define BX_HAVE_SOCKLEN_T 0 #define BX_HAVE_SOCKADDR_IN_SIN_LEN 0 #define BX_HAVE_GETTIMEOFDAY 0 #if defined(WIN32) #define BX_HAVE_REALTIME_USEC 1 #else #define BX_HAVE_REALTIME_USEC (BX_HAVE_GETTIMEOFDAY) #endif #define BX_HAVE_MKSTEMP 0 #define BX_HAVE_SYS_MMAN_H 0 #define BX_HAVE_XPM_H 0 #define BX_HAVE_TIMELOCAL 0 #define BX_HAVE_GMTIME 0 #define BX_HAVE_MKTIME 0 // This turns on Roland Mainz's idle hack. Presently it is specific to the X11 // gui. If people try to enable it elsewhere, give a compile error after the // gui definition so that they don't waste their time trying. #define BX_USE_IDLE_HACK 0 // Minimum Emulated IPS. // This is used in the realtime PIT as well as for checking the // IPS value set in the config file. #define BX_MIN_IPS 200000 // Use Static Member Funtions to eliminate 'this' pointer passing // If you want the efficiency of 'C', you can make all the // members of the C++ CPU class to be static. // This defaults to 1 since it should improve performance, but when // SMP mode is enabled, it will be turned off by configure. #define BX_USE_CPU_SMF 1 // Use static member functions in IO DEVice emulation modules. // For efficiency, use C like functions for IO handling, // and declare a device instance at compile time, // instead of using 'new' and storing the pointer. This // eliminates some overhead, especially for high-use IO // devices like the disk drive. // 1 = Use static member efficiency (normal) // 0 = Use nonstatic member functions (use only if you need // multiple instances of a device class #define BX_USE_HD_SMF 1 // Hard drive #define BX_USE_BIOS_SMF 1 // BIOS #define BX_USE_CMOS_SMF 1 // CMOS #define BX_USE_DMA_SMF 1 // DMA #define BX_USE_FD_SMF 1 // Floppy #define BX_USE_KEY_SMF 1 // Keyboard #define BX_USE_PAR_SMF 1 // Parallel #define BX_USE_PIC_SMF 1 // PIC #define BX_USE_PIT_SMF 1 // PIT #define BX_USE_SER_SMF 1 // Serial #define BX_USE_UM_SMF 1 // Unmapped #define BX_USE_VGA_SMF 1 // VGA #define BX_USE_SB16_SMF 1 // Sound (SB 16) #define BX_USE_DEV_SMF 1 // System Devices (port92) #define BX_USE_PCI_SMF 1 // PCI #define BX_USE_P2I_SMF 1 // PCI-to-ISA bridge #define BX_USE_PIDE_SMF 1 // PCI-IDE #define BX_USE_PCIVGA_SMF 1 // PCI-VGA #define BX_USE_PCIDEV_SMF 1 // PCI-DEV #define BX_USE_PCIUSB_SMF 1 // USB hub #define BX_USE_PCIPNIC_SMF 1 // PCI pseudo NIC #define BX_USE_NE2K_SMF 1 // NE2K #define BX_USE_EFI_SMF 1 // External FPU IRQ #define BX_USE_GAME_SMF 1 // Gameport #define BX_PLUGINS 0 #define BX_HAVE_DLFCN_H 0 #if BX_PLUGINS && \ ( !BX_USE_HD_SMF || !BX_USE_BIOS_SMF || !BX_USE_CMOS_SMF \ || !BX_USE_DMA_SMF || !BX_USE_FD_SMF || !BX_USE_KEY_SMF \ || !BX_USE_PAR_SMF || !BX_USE_PIC_SMF || !BX_USE_PIT_SMF \ || !BX_USE_SER_SMF || !BX_USE_UM_SMF || !BX_USE_VGA_SMF \ || !BX_USE_SB16_SMF || !BX_USE_DEV_SMF || !BX_USE_PCI_SMF \ || !BX_USE_P2I_SMF || !BX_USE_PCIVGA_SMF || !BX_USE_PCIUSB_SMF \ || !BX_USE_PCIPNIC_SMF || !BX_USE_PIDE_SMF \ || !BX_USE_NE2K_SMF || !BX_USE_EFI_SMF || !BX_USE_GAME_SMF \ || !BX_USE_PCIDEV_SMF) #error You must use SMF to have plugins #endif #define BX_SUPPORT_SB16 0 #define BX_SUPPORT_GAME 0 #if BX_SUPPORT_SB16 // Use virtual methods for the sound output functions #define BX_USE_SOUND_VIRTUAL 1 // Determines which sound output class is to be used. // Currently the following are available: // bx_sound_linux_c Output for Linux, to /dev/dsp and /dev/midi00 // bx_sound_windows_c Output for Windows midi and wave mappers // bx_sound_output_c Dummy functions, no output #define BX_SOUND_OUTPUT_C bx_sound_output_c #endif #define USE_RAW_SERIAL 0 #define BX_USE_SPECIFIED_TIME0 0 // This enables writing to port 0xe9 and the output // is sent to the console. Reading from port 0xe9 // will return 0xe9 to let you know this is available. // Leave this 0 unless you have a reason to use it. #define BX_PORT_E9_HACK 0 #define BX_GDBSTUB 0 // This option enables compressed (zlib) hd support #define BX_COMPRESSED_HD_SUPPORT 0 #define BX_HAVE_ZLIB 0 #if BX_COMPRESSED_HD_SUPPORT && !BX_HAVE_ZLIB #error You must have zlib to enable compressed hd support #endif // This option defines the number of supported ATA channels. // There are up to two drives per ATA channel. #define BX_MAX_ATA_CHANNEL 4 #if (BX_MAX_ATA_CHANNEL>4 || BX_MAX_ATA_CHANNEL<1) # error "BX_MAX_ATA_CHANNEL should be between 1 and 4" #endif // ================================================================= // BEGIN: OPTIONAL DEBUGGER SECTION // // These options are only used if you compile in support for the // native command line debugging environment. Typically, the debugger // is not used, and this section can be ignored. // ================================================================= #define BX_MAX_DIRTY_PAGE_TABLE_MEGS 1024 // Compile in support for virtual/linear/physical breakpoints. // Set to 1, only those you need. Recommend using only linear // breakpoints, unless you need others. Less supported means // slightly faster execution time. #define BX_DBG_SUPPORT_VIR_BPOINT 1 #define BX_DBG_SUPPORT_LIN_BPOINT 1 #define BX_DBG_SUPPORT_PHY_BPOINT 1 // You need only define one initial breakpoint into each // cpu simulator (emulator) here. Each simulator sets callbacks // and variables which the debugger uses from then on. #define BX_SIM1_INIT bx_dbg_init_cpu_mem_env0 #ifndef BX_SIM2_INIT #define BX_SIM2_INIT bx_dbg_init_cpu_mem_env1 #endif //#define BX_SIM2_INIT sim2_init // max number of virtual/linear/physical breakpoints handled #define BX_DBG_MAX_VIR_BPOINTS 10 #define BX_DBG_MAX_LIN_BPOINTS 10 #define BX_DBG_MAX_PHY_BPOINTS 10 // max file pathname size for debugger commands #define BX_MAX_PATH 256 // max nesting level for debug scripts including other scripts #define BX_INFILE_DEPTH 10 // use this command to include (nest) debug scripts #define BX_INCLUDE_CMD "source" // Use either 32 or 64 bit instruction counter for // debugger purposes. Uncomment one of these. //#define BX_DBG_ICOUNT_SIZE 32 #define BX_DBG_ICOUNT_SIZE 64 // Make a call to command line debugger extensions. If set to 1, // a call is made. An external routine has a chance to process // the command. If it does, than the debugger ignores the command. #define BX_DBG_EXTENSIONS 0 // ================================================================= // END: OPTIONAL DEBUGGER SECTION // ================================================================= ////////////////////////////////////////////////////////////////////// // END OF USER CONFIGURABLE OPTIONS : DON'T EDIT ANYTHING BELOW !!! // // THIS IS GENERATED BY THE ./configure SCRIPT // ////////////////////////////////////////////////////////////////////// #define BX_WITH_X11 0 #define BX_WITH_BEOS 0 #define BX_WITH_WIN32 0 #define BX_WITH_MACOS 0 #define BX_WITH_CARBON 0 #define BX_WITH_NOGUI 0 #define BX_WITH_TERM 0 #define BX_WITH_RFB 0 #define BX_WITH_AMIGAOS 0 #define BX_WITH_SDL 0 #define BX_WITH_SVGA 0 #define BX_WITH_WX 0 // BX_USE_TEXTCONFIG should be set to 1 unless Bochs is compiled // for wxWindows only. #define BX_USE_TEXTCONFIG 1 // add special export symbols for win32 DLL building. The main code must // have __declspec(dllexport) on variables, functions, or classes that the // plugins can access. The plugins should #define PLUGGABLE which will // activate the __declspec(dllimport) instead. #if defined(WIN32) || defined(__CYGWIN__) # if BX_PLUGINS && defined(BX_PLUGGABLE) // #warning I will import DLL symbols from Bochs main program. # define BOCHSAPI __declspec(dllimport) # else // #warning I will export DLL symbols. # define BOCHSAPI __declspec(dllexport) # endif #endif #ifndef BOCHSAPI # define BOCHSAPI #endif #if defined(__CYGWIN__) // Make BOCHSAPI_CYGONLY exactly the same as BOCHSAPI. This symbol // will be used for any cases where Cygwin requires a special tag // but VC++ does not. #define BOCHSAPI_CYGONLY BOCHSAPI #else // define the symbol to be empty #define BOCHSAPI_CYGONLY /*empty*/ #endif #define BX_DEFAULT_CONFIG_INTERFACE "defined_by_configure" #define BX_DEFAULT_DISPLAY_LIBRARY "defined_by_configure" // Roland Mainz's idle hack is presently specific to X11. If people try to // enable it elsewhere, give a compile error so that they don't waste their // time trying. #if (BX_USE_IDLE_HACK && !BX_WITH_X11) # error IDLE_HACK will only work with the X11 gui. Correct configure args and retry. #endif #define WORDS_BIGENDIAN 0 #define SIZEOF_UNSIGNED_CHAR 0 #define SIZEOF_UNSIGNED_SHORT 0 #define SIZEOF_UNSIGNED_INT 0 #define SIZEOF_UNSIGNED_LONG 0 #define SIZEOF_UNSIGNED_LONG_LONG 0 #define SIZEOF_INT_P 0 #define BX_64BIT_CONSTANTS_USE_LL 1 #if BX_64BIT_CONSTANTS_USE_LL // doesn't work on Microsoft Visual C++, maybe others #define BX_CONST64(x) (x##LL) #else #define BX_CONST64(x) (x) #endif #if defined(WIN32) typedef unsigned char Bit8u; typedef signed char Bit8s; typedef unsigned short Bit16u; typedef signed short Bit16s; typedef unsigned int Bit32u; typedef signed int Bit32s; #ifdef __MINGW32__ typedef unsigned long long Bit64u; typedef signed long long Bit64s; #include #else typedef unsigned __int64 Bit64u; typedef signed __int64 Bit64s; #endif #elif BX_WITH_MACOS typedef unsigned char Bit8u; typedef signed char Bit8s; typedef unsigned short Bit16u; typedef signed short Bit16s; typedef unsigned int Bit32u; typedef signed int Bit32s; typedef unsigned long long Bit64u; typedef signed long long Bit64s; #else // Unix like platforms #if SIZEOF_UNSIGNED_CHAR != 1 # error "sizeof (unsigned char) != 1" #else typedef unsigned char Bit8u; typedef signed char Bit8s; #endif #if SIZEOF_UNSIGNED_SHORT != 2 # error "sizeof (unsigned short) != 2" #else typedef unsigned short Bit16u; typedef signed short Bit16s; #endif #if SIZEOF_UNSIGNED_INT == 4 typedef unsigned int Bit32u; typedef signed int Bit32s; #elif SIZEOF_UNSIGNED_LONG == 4 typedef unsigned long Bit32u; typedef signed long Bit32s; #else # error "can't find sizeof(type) of 4 bytes!" #endif #if SIZEOF_UNSIGNED_LONG == 8 typedef unsigned long Bit64u; typedef signed long Bit64s; #elif SIZEOF_UNSIGNED_LONG_LONG == 8 typedef unsigned long long Bit64u; typedef signed long long Bit64s; #else # error "can't find data type of 8 bytes" #endif #endif // now that Bit32u and Bit64u exist, defined bx_address #if BX_SUPPORT_X86_64 typedef Bit64u bx_address; #else typedef Bit32u bx_address; #endif // technically, in an 8 bit signed the real minimum is -128, not -127. // But if you decide to negate -128 you tend to get -128 again, so it's // better not to use the absolute maximum in the signed range. #define BX_MAX_BIT64U ( (Bit64u) -1 ) #define BX_MIN_BIT64U ( 0 ) #define BX_MAX_BIT64S ( ((Bit64u) -1) >> 1 ) #define BX_MIN_BIT64S ( -(((Bit64u) -1) >> 1) ) #define BX_MAX_BIT32U ( (Bit32u) -1 ) #define BX_MIN_BIT32U ( 0 ) #define BX_MAX_BIT32S ( ((Bit32u) -1) >> 1 ) #define BX_MIN_BIT32S ( -(((Bit32u) -1) >> 1) ) #define BX_MAX_BIT16U ( (Bit16u) -1 ) #define BX_MIN_BIT16U ( 0 ) #define BX_MAX_BIT16S ( ((Bit16u) -1) >> 1 ) #define BX_MIN_BIT16S ( -(((Bit16u) -1) >> 1) ) #define BX_MAX_BIT8U ( (Bit8u) -1 ) #define BX_MIN_BIT8U ( 0 ) #define BX_MAX_BIT8S ( ((Bit8u) -1) >> 1 ) #define BX_MIN_BIT8S ( -(((Bit8u) -1) >> 1) ) // create an unsigned integer type that is the same size as a pointer. // You can typecast a pointer to a bx_pr_equiv_t without losing any // bits (and without getting the compiler excited). This is used in // the FPU emulation code, where pointers and integers are often // used interchangeably. #if SIZEOF_INT_P == 4 typedef Bit32u bx_ptr_equiv_t; #elif SIZEOF_INT_P == 8 typedef Bit64u bx_ptr_equiv_t; #else # error "could not define bx_ptr_equiv_t to size of int*" #endif // Use a boolean type that will not conflict with the builtin type // on any system. typedef Bit32u bx_bool; #if BX_WITH_MACOS # define bx_ptr_t char * #else # define bx_ptr_t void * #endif #if defined(WIN32) # define BX_LITTLE_ENDIAN #elif BX_WITH_MACOS # define BX_BIG_ENDIAN #else #if WORDS_BIGENDIAN # define BX_BIG_ENDIAN #else # define BX_LITTLE_ENDIAN #endif #endif // defined(WIN32) #if BX_SUPPORT_X86_64 #ifdef BX_LITTLE_ENDIAN typedef struct { Bit64u lo; Bit64u hi; } Bit128u; typedef struct { Bit64u lo; Bit64s hi; } Bit128s; #else // must be Big Endian typedef struct { Bit64u hi; Bit64u lo; } Bit128u; typedef struct { Bit64s hi; Bit64u lo; } Bit128s; #endif #endif // #if BX_SUPPORT_X86_64 // for now only term.cc requires a GUI sighandler. #define BX_GUI_SIGHANDLER (BX_WITH_TERM) #define HAVE_SIGACTION 1 // configure will change the definition of "inline" to the value // that the C compiler allows. It tests the following keywords to // see if any is permitted: inline, __inline__, __inline. If none // is permitted, it defines inline to be empty. #define inline inline // inline functions in headers that are compiled with C compiler // (e.g. fpu code) are declared with BX_C_INLINE macro. Note that // the word "inline" itself may now be redefined by the above #define. // Many compilers are known to work with "static inline". If the // compiler can put the function inline, it does so and never creates // a symbol for the function. If optimization is off, or inline is // defined to be empty, the static keyword causes the function to create // a symbol that's visible only to that .c file. Each .c file that // includes the header will produde another local version of the // BX_C_INLINE function (not ideal). However without "static" you can // duplicate symbol problems which are even worse. #define BX_C_INLINE static inline // Use BX_CPP_INLINE for all C++ inline functions. Note that the // word "inline" itself may now be redefined by the above #define. #define BX_CPP_INLINE inline #ifdef __GNUC__ // Some helpful compiler hints for compilers that allow them; GCC for now. // // BX_CPP_AlignN(n): // Align a construct on an n-byte boundary. // // BX_CPP_AttrPrintf(formatArg, firstArg): // This function takes printf-like arguments, so the compiler can check // the consistency of the format string and the matching arguments. // 'formatArg' is the parameter number (starting from 1) of the format // string argument. 'firstArg' is the parameter number of the 1st argument // to check against the string argument. NOTE: For non-static member // functions, the this-ptr is argument number 1 but is invisible on // the function prototype declaration - but you still have to count it. // // BX_CPP_AttrNoReturn(): // This function never returns. The compiler can optimize-out following // code accordingly. #define BX_CPP_AlignN(n) __attribute__ ((aligned (n))) #define BX_CPP_AttrPrintf(formatArg, firstArg) \ __attribute__ ((format (printf, formatArg, firstArg))) #define BX_CPP_AttrNoReturn() __attribute__ ((noreturn)) #else #define BX_CPP_AlignN(n) /* Not supported. */ #define BX_CPP_AttrPrintf(formatArg, firstArg) /* Not supported. */ #define BX_CPP_AttrNoReturn() /* Not supported. */ #endif #define BX_DEBUGGER 0 #define BX_DISASM 0 #define BX_PROVIDE_CPU_MEMORY 1 #define BX_PROVIDE_DEVICE_MODELS 1 #define BX_SUPPORT_VBE 0 #define BX_PROVIDE_MAIN 1 #define BX_INSTRUMENTATION 0 #define BX_USE_LOADER 0 // for debugger, CPU simulator handle ID // 0 is the default, for using only one CPU simulator // 1 is for the 2nd CPU simulator #define BX_SIM_ID 0 #define BX_NUM_SIMULATORS 1 // limited i440FX PCI support #define BX_PCI_SUPPORT 0 // Experimental VGA on PCI #define BX_PCI_VGA_SUPPORT 1 // Experimental host PCI device mapping #define BX_PCI_DEV_SUPPORT 0 #if (BX_PCI_DEV_SUPPORT && !BX_PCI_SUPPORT) #error To enable PCI host device mapping, you must also enable PCI #endif // limited USB on PCI #define BX_PCI_USB_SUPPORT 0 #if (BX_PCI_USB_SUPPORT && !BX_PCI_SUPPORT) #error To enable USB, you must also enable PCI #endif // Promise VLBIDE DC2300 Support #define BX_PDC20230C_VLBIDE_SUPPORT 0 #define BX_SUPPORT_FPU 0 #define BX_SUPPORT_MMX 0 #define BX_SUPPORT_3DNOW 0 #define BX_SUPPORT_SSE 0 #define BX_SUPPORT_DAZ 0 #define BX_SUPPORT_PNI 0 #define BX_SUPPORT_SEP 0 #define BX_SUPPORT_4MEG_PAGES 0 #define BX_SupportGuest2HostTLB 0 #define BX_SupportRepeatSpeedups 0 #define BX_SupportGlobalPages 0 #define BX_SupportPAE 0 #define BX_SupportICache 0 #define BX_SupportHostAsms 0 #define BX_SupportHostAsmsFpu 0 // if 1, don't do gpf on MSRs that we don't implement #define BX_IGNORE_BAD_MSR 0 // ======================================================== // These are some very temporary hacks I made to the 64-bit // support to help Peter with debugging etc. They will be removed // soon and there is no configure option for them (on purpose). // By default, they are not compiled in. // I set this to 1 to bail in instructions which may not be honoring // the 64-bit widths of RIP/RSP. If I trip a panic, then I clean // the function up and remove the panic. You don't have to use // these. #if 0 #define BailBigRSP(s) \ if ( (RIP > 0xffffffff) || \ (RSP > 0xffffffff) ) \ BX_PANIC((s ": bailing due to big RSP value, mode==%u", \ BX_CPU_THIS_PTR cpu_mode)) #else #define BailBigRSP(s) #endif // ======================================================== #if (BX_SUPPORT_MMX && BX_CPU_LEVEL < 5) #error With CPU level < 5, you must disable MMX support. #endif #if (!BX_SUPPORT_FPU && BX_CPU_LEVEL >= 5) #error With CPU level >= 5, you must enable FPU support. #endif #if (BX_SUPPORT_MMX && !BX_SUPPORT_FPU) #error "MMX cannot be compiled without FPU support" #endif #if (BX_SUPPORT_3DNOW && !BX_SUPPORT_MMX) #error "3DNow! cannot be compiled without MMX support" #endif #if (BX_SUPPORT_SSE && !BX_SUPPORT_MMX) #error "SSE cannot be compiled without FPU+MMX support" #endif #if (BX_CPU_LEVEL<6 && BX_SUPPORT_SSE) #error SSE is only supported with CPU_LEVEL >= 6 #endif #if (BX_SUPPORT_PNI && BX_SUPPORT_SSE <= 2) #error "PNI cannot be compiled without SSE/SSE2 support" #endif #if (BX_CPU_LEVEL<6 && BX_SUPPORT_SEP) #error SYSENTER/SYSEXIT only supported with CPU_LEVEL >= 6 #endif #if BX_SUPPORT_X86_64 // Sanity checks to ensure that you cannot accidently use conflicting options. #if BX_CPU_LEVEL < 5 #error X86-64 requires cpu level 6 or greater #endif #if (BX_SUPPORT_SSE<2) #error X86-64 requires SSE2 #endif #if !BX_SupportPAE #error X86-64 requires Physical Address Extensions (PAE) #endif #if !BX_SupportGlobalPages #error X86-64 requires Page Global Extension (PGE) #endif #if !BX_SUPPORT_4MEG_PAGES #error X86-64 requires Page Size Extension (PSE) #endif #if BX_SUPPORT_SEP #error SYSENTER/SYSEXIT not implemented for X86-64 #endif #endif #define BX_HAVE_GETENV 0 #define BX_HAVE_SETENV 0 #define BX_HAVE_SELECT 0 #define BX_HAVE_SNPRINTF 0 #define BX_HAVE_VSNPRINTF 0 #define BX_HAVE_STRTOULL 0 #define BX_HAVE_STRTOUQ 0 #define BX_HAVE_STRDUP 0 #define BX_HAVE_STRREV 0 #define BX_HAVE_STRUCT_TIMEVAL 0 // used in term gui #define BX_HAVE_COLOR_SET 0 #define BX_HAVE_MVHLINE 0 #define BX_HAVE_MVVLINE 0 // set if your compiler does not permit an empty struct #define BX_NO_EMPTY_STRUCTS 0 // set if your compiler does not understand __attribute__ after a struct #define BX_NO_ATTRIBUTES 0 #if BX_NO_ATTRIBUTES #define GCC_ATTRIBUTE(x) /* attribute not supported */ #else #define GCC_ATTRIBUTE __attribute__ #endif // set to use fast function calls #define BX_FAST_FUNC_CALL 0 // On gcc2.95+ x86 only #if BX_FAST_FUNC_CALL && defined(__i386__) && defined(__GNUC__) && (__GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)) # define BX_CPP_AttrRegparmN(X) __attribute__((regparm(X))) #else # define BX_CPP_AttrRegparmN(X) /* Not defined */ #endif // set if your compiler does not allow label at the end of a {} block #define BX_NO_BLANK_LABELS 0 // set if you do have , used in bx_debug/dbg_main.c #define BX_HAVE_HASH_MAP 0 // set if you do have , used in bx_debug/dbg_main.c #define BX_HAVE_HASH_MAP_H 0 // set if you do have , used in bx_debug/dbg_main.c #define BX_HAVE_SET 0 // set if you do have , used in bx_debug/dbg_main.c #define BX_HAVE_SET_H 0 // Support x86 hardware debugger registers and facilites. // These are the debug facilites offered by the x86 architecture, // not the optional built-in debugger. #define BX_X86_DEBUGGER 0 #define BX_SUPPORT_CDROM 0 #if BX_SUPPORT_CDROM // This is the C++ class name to use if we are supporting // low-level CDROM. # define LOWLEVEL_CDROM cdrom_interface #endif // NE2K network emulation #define BX_NE2K_SUPPORT 0 #define BX_ETH_NULL_LOGGING 1 #define BX_ETH_FBSD_LOGGING 1 // determine which NE2K packet mover modules will be enabled // (this was moved from iodev/eth.h) #define ETH_NULL 1 #ifdef BX_USE_ETH_ARPBACK # define ETH_ARPBACK 1 #endif #if defined(__FreeBSD__) || defined(__OpenBSD__) || defined(__NetBSD__) || defined(__APPLE__) #define ETH_FBSD 1 #endif #if defined(linux) #define ETH_LINUX 1 #endif #if defined(WIN32) #define ETH_WIN32 1 #endif // this enables Ethertap packet mover; determined by configure script #define HAVE_ETHERTAP 0 // this enables TUN/TAP packet mover; determined by configure script #define HAVE_TUNTAP 0 // Pseudo PCI NIC #define BX_PCI_PNIC_SUPPORT 0 #if (BX_PCI_PNIC_SUPPORT && !BX_PCI_SUPPORT) #error To enable the PCI pseudo NIC, you must also enable PCI #endif // Check for NE2K support, since all the networking code is ifdeffed // under that. There should probably be a more generic "enable-networking" #if (BX_PCI_PNIC_SUPPORT && !BX_NE2K_SUPPORT) #error To enable the pseudo NIC, you must also enable ne2000 #endif // I/O Interface to debug #define BX_IODEBUG_SUPPORT 0 // External Debugger #define BX_EXTERNAL_DEBUGGER 0 #define BX_OVERRIDE_ASK 0 // Magic breakpoints #define BX_MAGIC_BREAKPOINT 1 #ifdef WIN32 #define BX_FLOPPY0_NAME "Floppy Disk A:" #define BX_FLOPPY1_NAME "Floppy Disk B:" #else #define BX_FLOPPY0_NAME "Floppy Disk 0" #define BX_FLOPPY1_NAME "Floppy Disk 1" #endif // This is handy for certain performance testing purposes, but otherwise // totally useless. If you define BX_SCHEDULED_DIE_TIME then it enables code // in bx_pit_c::periodic that will cause Bochs to exit() after a certain number // of instructions. //#define BX_SCHEDULED_DIE_TIME 1162230000 // end of redhat6.0 boot #endif // _BX_CONFIG_H