// Copyright (C) 2001 MandrakeSoft S.A. // // MandrakeSoft S.A. // 43, rue d'Aboukir // 75002 Paris - France // http://www.linux-mandrake.com/ // http://www.mandrakesoft.com/ // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public // License as published by the Free Software Foundation; either // version 2 of the License, or (at your option) any later version. // // This library is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // Lesser General Public License for more details. // // You should have received a copy of the GNU Lesser General Public // License along with this library; if not, write to the Free Software // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // This file (SB16.CC) written and donated by Josef Drexler #include "bochs.h" #define LOG_THIS bx_sb16. // some shortcuts to save typing #define LOGFILE BX_SB16_THIS logfile #define BOTHLOG(x) (x) #define MIDILOG(x) ((bx_options.sb16.midimode>0?x:0x7f)) #define WAVELOG(x) ((bx_options.sb16.wavemode>0?x:0x7f)) #define MIDIDATA BX_SB16_THIS midifile #define WAVEDATA BX_SB16_THIS wavefile #define MPU BX_SB16_THIS mpu401 #define DSP BX_SB16_THIS dsp #define MIXER BX_SB16_THIS mixer #define EMUL BX_SB16_THIS emuldata #define OPL BX_SB16_THIS opl #define BX_SB16_OUTPUT BX_SB16_THIS output // here's a safe way to print out null pointeres #define MIGHT_BE_NULL(x) ((x==NULL)? "(null)" : x) bx_sb16_c bx_sb16; #if BX_USE_SB16_SMF #define this ((void *)&bx_sb16) #endif bx_sb16_c::bx_sb16_c(void) { setprefix("[SB16]"); settype(SB16LOG); } bx_sb16_c::~bx_sb16_c(void) { switch (bx_options.sb16.midimode) { case 2: finishmidifile(); break; case 1: if (MPU.outputinit != 0) BX_SB16_OUTPUT->closemidioutput(); break; case 3: if (MIDIDATA != NULL) fclose(MIDIDATA); break; } switch (bx_options.sb16.wavemode) { case 2: finishvocfile(); break; case 1: if (DSP.outputinit != 0) BX_SB16_OUTPUT->closewaveoutput(); break; case 3: if (WAVEDATA != NULL) fclose(WAVEDATA); break; } delete(BX_SB16_OUTPUT); delete(DSP.dma.chunk); if ((bx_options.sb16.loglevel > 0) && LOGFILE) fclose(LOGFILE); } void bx_sb16_c::init(bx_devices_c *d) { BX_SB16_THIS devices = d; unsigned addr; if ( (bx_options.sb16.logfile == NULL) || (strlen(bx_options.sb16.logfile) < 1) ) bx_options.sb16.loglevel = 0; if (bx_options.sb16.loglevel > 0) { LOGFILE = fopen(bx_options.sb16.logfile,"w"); // logfile for errors etc. if (LOGFILE == NULL) { BX_ERROR(("Error opening file %s. Logging disabled.", bx_options.sb16.logfile)); bx_options.sb16.loglevel = 0; } } // let the output functions initialize BX_SB16_OUTPUT = new BX_SOUND_OUTPUT_C(BX_SB16_THISP); if (BX_SB16_OUTPUT == NULL) { writelog( MIDILOG(2), "Couldn't initialize output devices. Output disabled."); bx_options.sb16.midimode = 0; bx_options.sb16.wavemode = 0; } if ( (bx_options.sb16.midimode == 2) || (bx_options.sb16.midimode == 3) ) { MIDIDATA = fopen(bx_options.sb16.midifile,"w"); if (MIDIDATA == NULL) { writelog (MIDILOG(2), "Error opening file %s. Midimode disabled.", bx_options.sb16.midifile); bx_options.sb16.midimode = 0; } else if (bx_options.sb16.midimode == 2) initmidifile(); } if ( (bx_options.sb16.wavemode == 2) || (bx_options.sb16.wavemode == 3) ) { WAVEDATA = fopen(bx_options.sb16.wavefile,"w"); if (WAVEDATA == NULL) { writelog (WAVELOG(2), "Error opening file %s. Wavemode disabled.", bx_options.sb16.wavefile); bx_options.sb16.wavemode = 0; } else if (bx_options.sb16.wavemode == 2) initvocfile(); } DSP.dma.chunk = new Bit8u[BX_SOUND_OUTPUT_WAVEPACKETSIZE]; DSP.dma.chunkindex = 0; DSP.outputinit = 0; MPU.outputinit = 0; if (DSP.dma.chunk == NULL) { writelog( WAVELOG(2), "Couldn't allocate wave buffer - wave output disabled."); bx_options.sb16.wavemode = 0; } BX_INFO(("midi=%d,%s wave=%d,%s log=%d,%s dmatimer=%d\n", bx_options.sb16.midimode, MIGHT_BE_NULL(bx_options.sb16.midifile), bx_options.sb16.wavemode, MIGHT_BE_NULL(bx_options.sb16.wavefile), bx_options.sb16.loglevel, MIGHT_BE_NULL(bx_options.sb16.logfile), bx_options.sb16.dmatimer)); // allocate the FIFO buffers - except for the MPUMIDICMD buffer // these sizes are generous, 16 or 8 would probably be sufficient MPU.datain.init( (int) 64); // the input MPU.dataout.init( (int) 64); // and output MPU.cmd.init( (int) 64); // and command buffers MPU.midicmd.init( (int) 256); // and the midi command buffer (note- large SYSEX'es have to fit!) DSP.datain.init( (int) 64); // the DSP input DSP.dataout.init( (int) 64); // and output buffers EMUL.datain.init( (int) 64); // the emulator ports EMUL.dataout.init( (int) 64); // for changing emulator settings // reset all parts of the hardware by // triggering their reset functions // reset the Emulator port emul_write(0x00); // reset the MPU401 mpu_command(0xff); MPU.last_delta_time = 0xffffffff; // reset the DSP DSP.resetport = 1; // so that one call to dsp_reset is sufficient dsp_reset(0); // (reset is 1 to 0 transition) BX_SB16_IRQ = -1; // will be initialized later by the mixer reset // call the mixer reset mixer_writeregister(0x00); mixer_writedata(0x00); // reset the FM emulation OPL.mode = dual; opl_entermode(single); // Allocate the IO addresses, 2x0..2xf, 3x0..3x4 and 388..38b for (addr=BX_SB16_IO; addrregister_io_read_handler(this, &read_handler, addr, "SB16"); BX_SB16_THIS devices->register_io_write_handler(this, &write_handler, addr, "SB16"); } for (addr=BX_SB16_IOMPU; addrregister_io_read_handler(this, &read_handler, addr, "SB16"); BX_SB16_THIS devices->register_io_write_handler(this, &write_handler, addr, "SB16"); } /* Uncomment this if you know the consequences... for (addr=BX_SB16_IOADLIB; addrregister_io_read_handler(this, read_handler, addr, "SB16"); BX_SB16_THIS devices->register_io_write_handler(this, write_handler, addr, "SB16"); } */ writelog(BOTHLOG(3), "driver initialised, IRQ %d, IO %03x/%03x/%03x, DMA %d/%d", BX_SB16_IRQ, BX_SB16_IO, BX_SB16_IOMPU, BX_SB16_IOADLIB, BX_SB16_DMAL, BX_SB16_DMAH); // initialize the timers MPU.timer_handle = bx_pc_system.register_timer (BX_SB16_THISP, mpu_timer, 500000 / 384, 1, 1); // midi timer: active, continuous, 500000 / 384 seconds (384 = delta time, 500000 = sec per beat at 120 bpm. Don't change this!) DSP.timer_handle = bx_pc_system.register_timer (BX_SB16_THISP, dsp_dmatimer, 1, 1, 0); // dma timer: inactive, continous, frequency variable OPL.timer_handle = bx_pc_system.register_timer (BX_SB16_THISP, opl_timer, 80, 1, 0); // opl timer: inactive, continuous, frequency 80us writelog(MIDILOG(4), "Timers initialized, midi %d, dma %d, opl %d", MPU.timer_handle, DSP.timer_handle, OPL.timer_handle ); MPU.current_timer = 0; } // the timer functions void bx_sb16_c::mpu_timer (void *this_ptr) { ((bx_sb16_c *) this_ptr)->mpu401.current_timer++; } void bx_sb16_c::dsp_dmatimer (void *this_ptr) { bx_sb16_c *This = (bx_sb16_c *) this_ptr; // raise the DRQ line. It is then lowered by dsp_getsamplebyte() // when the next byte has been received. // However, don't do this if the next byte/word will fill up the // output buffer and the output functions are not ready yet. if ( (bx_options.sb16.wavemode != 1) || ( (This->dsp.dma.chunkindex + 1 < BX_SOUND_OUTPUT_WAVEPACKETSIZE) && (This->dsp.dma.count > 0) ) || (This->output->waveready() == BX_SOUND_OUTPUT_OK) ) bx_pc_system.set_DRQ(BX_SB16_DMAL, 1); } void bx_sb16_c::opl_timer (void *this_ptr) { ((bx_sb16_c *) this_ptr)->opl_timerevent(); } // the various IO handlers // The DSP/FM music part // dsp_reset() resets the DSP after the sequence 1/0. Returns // 0xaa on the data port void bx_sb16_c::dsp_reset(Bit32u value) { writelog(WAVELOG(4), "DSP Reset port write value %x", value); // just abort high speed mode if it is set if (DSP.dma.highspeed != 0) { DSP.dma.highspeed = 0; writelog(WAVELOG(4), "High speed mode aborted"); return; } if ( (DSP.resetport == 1) && (value == 0) ) { // 1-0 sequences to reset port, do one of the following: // if in UART MIDI mode, abort it, don't reset // if in Highspeed mode (not SB16!), abort it, don't reset // otherwise reset if (DSP.midiuartmode != 0) { // abort UART MIDI mode DSP.midiuartmode = 0; writelog(MIDILOG(4), "DSP UART MIDI mode aborted"); return; } // do the reset writelog(WAVELOG(4), "DSP resetting..."); if (DSP.irqpending != 0) { BX_SB16_THIS devices->pic->untrigger_irq(BX_SB16_IRQ); writelog(WAVELOG(4), "DSP reset: IRQ untriggered"); } if (DSP.dma.mode != 0) { writelog(WAVELOG(4), "DSP reset: DMA aborted"); DSP.dma.mode = 1; // no auto init anymore dsp_dmadone(); } DSP.resetport = 0; DSP.speaker = 0; DSP.irqpending = 0; DSP.midiuartmode = 0; DSP.prostereo = 0; DSP.dma.mode = 0; DSP.dma.fifo = 0; DSP.dma.output = 0; DSP.dma.stereo = 0; DSP.dma.issigned = 0; DSP.dma.count = 0; DSP.dma.highspeed = 0; DSP.dma.chunkindex = 0; DSP.dataout.reset(); // clear the buffers DSP.datain.reset(); DSP.dataout.put(0xaa); // acknowledge the reset } else DSP.resetport = value; } // dsp_dataread() reads the data port of the DSP Bit32u bx_sb16_c::dsp_dataread() { Bit8u value = 0xff; // if we are in MIDI UART mode, call the mpu401 part instead if (DSP.midiuartmode != 0) value = mpu_dataread(); else { // default behaviour: if none available, return last byte again // if (DSP.dataout.empty() == 0) DSP.dataout.get(&value); } writelog(WAVELOG(4), "DSP Data port read, result = %x", value); return(value); } // dsp_datawrite() writes a command or data byte to the data port void bx_sb16_c::dsp_datawrite(Bit32u value) { int bytesneeded; Bit8u mode, value8; Bit16u length; writelog(WAVELOG(4), "DSP Data port write, value %x", value); // in high speed mode, any data passed to DSP is a sample if (DSP.dma.highspeed != 0) { dsp_getsamplebyte(value); return; } // route information to mpu401 part if in MIDI UART mode if (DSP.midiuartmode != 0) { mpu_datawrite(value); return; } if (DSP.datain.hascommand() == 1) // already a command pending, add to argument list { if (DSP.datain.put(value) == 0) { writelog(WAVELOG(3), "DSP command buffer overflow for command %02x", DSP.datain.currentcommand()); } } else // no command pending, set one up { bytesneeded = 0; // find out how many arguments the command takes switch (value) { // all fallbacks intended! case 0x04: case 0x0f: case 0x10: case 0x40: case 0x38: case 0xe0: bytesneeded = 1; break; case 0x05: case 0x0e: case 0x14: case 0x16: case 0x17: case 0x41: case 0x42: case 0x48: case 0x74: case 0x75: case 0x76: case 0x77: case 0x80: case 0xe4: bytesneeded = 2; break; // 0xb0 ... 0xbf: case 0xb0: case 0xb1: case 0xb2: case 0xb3: case 0xb4: case 0xb5: case 0xb6: case 0xb7: case 0xb8: case 0xb9: case 0xba: case 0xbb: case 0xbc: case 0xbd: case 0xbe: case 0xbf: // 0xc0 ... 0xcf: case 0xc0: case 0xc1: case 0xc2: case 0xc3: case 0xc4: case 0xc5: case 0xc6: case 0xc7: case 0xc8: case 0xc9: case 0xca: case 0xcb: case 0xcc: case 0xcd: case 0xce: case 0xcf: bytesneeded = 3; break; } DSP.datain.newcommand(value, bytesneeded); } if (DSP.datain.commanddone() == 1) // command is complete, process it { writelog(WAVELOG(4), "DSP command %x with %d arg bytes", DSP.datain.currentcommand(), DSP.datain.bytes()); switch (DSP.datain.currentcommand()) { // DSP commands - comments are the parameters for // this command, and/or the output // ASP commands (Advanced Signal Processor) // undocumented (?), just from looking what an SB16 does case 0x04: DSP.datain.get(&value8); break; case 0x05: DSP.datain.get(&value8); DSP.datain.get(&value8); break; case 0x0e: DSP.datain.get(&value8); DSP.datain.get(&value8); break; case 0x0f: DSP.datain.get(&value8); DSP.dataout.put(0); // 0 means no ASP present? break; // direct mode DAC case 0x10: // 1: 8bit sample DSP.datain.get(&value8); // sample is ignored break; // uncomp'd, normal DAC DMA case 0x14: // 1,2: lo(length) hi(length) DSP.datain.getw(&length); dsp_dma(0xc0, 0x00, length, 0); break; // 2-bit comp'd, normal DAC DMA, no ref byte case 0x16: // 1,2: lo(length) hi(length) DSP.datain.getw(&length); dsp_dma(0xc0, 0x00, length, 2); break; // 2-bit comp'd, normal DAC DMA, 1 ref byte case 0x17: // 1,2: lo(length) hi(length) DSP.datain.getw(&length); dsp_dma(0xc0, 0x00, length, 2|8); break; // uncomp'd, auto DAC DMA case 0x1c: // none dsp_dma(0xc4, 0x00, DSP.dma.blocklength, 0); break; // 2-bit comp'd, auto DAC DMA, 1 ref byte case 0x1f: // none dsp_dma(0xc4, 0x00, DSP.dma.blocklength, 2|8); break; // direct mode ADC case 0x20: // o1: 8bit sample DSP.dataout.put(0x80); // put a silence, for now. break; // uncomp'd, normal ADC DMA case 0x24: // 1,2: lo(length) hi(length) DSP.datain.getw(&length); dsp_dma(0xc8, 0x00, length, 0); break; // uncomp'd, auto ADC DMA case 0x2c: // none dsp_dma(0xcc, 0x00, DSP.dma.blocklength, 0); break; // ? polling mode MIDI input case 0x30: break; // ? interrupt mode MIDI input case 0x31: break; // 0x34..0x37: UART mode MIDI output case 0x34: // UART mode MIDI input/output case 0x35: // UART polling mode MIDI IO with time stamp case 0x36: // UART interrupt mode MIDI IO with time stamp case 0x37: // Fallbacks intended - all set the midi uart mode DSP.midiuartmode = 1; break; // MIDI output case 0x38: DSP.datain.get(&value8); // route to mpu401 part mpu_datawrite(value8); break; // set time constant case 0x40: // 1: timeconstant DSP.datain.get(&value8); DSP.dma.timeconstant = value8 << 8; DSP.dma.samplerate = (Bit32u) 256000000L / ((Bit32u) 65536L - (Bit32u) DSP.dma.timeconstant); break; // set samplerate for input case 0x41: // (fallback intended) // set samplerate for output case 0x42: // 1,2: hi(frq) lo(frq) DSP.datain.getw1( &(DSP.dma.samplerate) ); DSP.dma.timeconstant = 65536 - (Bit32u) 256000000 / (Bit32u) DSP.dma.samplerate ; break; // set block length case 0x48: // 1,2: lo(blk len) hi(blk len) DSP.datain.getw( &(DSP.dma.blocklength) ); break; // 4-bit comp'd, normal DAC DMA, no ref byte case 0x74: // 1,2: lo(length) hi(length) DSP.datain.getw(&length); dsp_dma(0xc0, 0x00, length, 4); break; // 4-bit comp'd, normal DAC DMA, 1 ref byte case 0x75: // 1,2: lo(length) hi(length) DSP.datain.getw(&length); dsp_dma(0xc0, 0x00, length, 4|8); break; // 3-bit comp'd, normal DAC DMA, no ref byte case 0x76: // 1,2: lo(length) hi(length) DSP.datain.getw(&length); dsp_dma(0xc0, 0x00, length, 3); break; // 3-bit comp'd, normal DAC DMA, 1 ref byte case 0x77: // 1,2: lo(length) hi(length) DSP.datain.getw(&length); dsp_dma(0xc0, 0x00, length, 3|8); break; // 4-bit comp'd, auto DAC DMA, 1 ref byte case 0x7d: // none dsp_dma(0xc4, 0x00, DSP.dma.blocklength, 4|8); break; // 3-bit comp'd, auto DAC DMA, 1 ref byte case 0x7f: // none dsp_dma(0xc4, 0x00, DSP.dma.blocklength, 3|8); break; // silence period case 0x80: // 1,2: lo(silence) hi(silence) (len in samples) DSP.datain.getw(&length); // only handled for VOC output so far if (bx_options.sb16.wavemode == 2) { Bit8u temparray[3] = { length & 0xff, length >> 8, DSP.dma.timeconstant >> 8 }; writevocblock(3, 3, temparray, 0, NULL); } break; // 8-bit auto DAC DMA, highspeed case 0x90: //none dsp_dma(0xc4, 0x00, DSP.dma.blocklength, 16); break; // 8-bit normal DAC DMA, highspeed case 0x91: //none dsp_dma(0xc0, 0x00, DSP.dma.blocklength, 16); break; // 8-bit auto ADC DMA, highspeed case 0x98: //none dsp_dma(0xcc, 0x00, DSP.dma.blocklength, 16); break; case 0x99: // 8-bit normal DMA //none dsp_dma(0xc8, 0x00, DSP.dma.blocklength, 16); break; // switch to mono for SBPro DAC/ADC case 0xa0: // none DSP.prostereo = 1; break; // switch to stereo for SBPro DAC/ADC case 0xa8: //// none DSP.prostereo = 2; break; // 0xb0 ... 0xbf: // 16 bit DAC/ADC DMA, general commands // fallback intended case 0xb0: case 0xb1: case 0xb2: case 0xb3: case 0xb4: case 0xb5: case 0xb6: case 0xb7: case 0xb8: case 0xb9: case 0xba: case 0xbb: case 0xbc: case 0xbd: case 0xbe: case 0xbf: // 0xc0 ... 0xcf: // 8 bit DAC/ADC DMA, general commands case 0xc0: case 0xc1: case 0xc2: case 0xc3: case 0xc4: case 0xc5: case 0xc6: case 0xc7: case 0xc8: case 0xc9: case 0xca: case 0xcb: case 0xcc: case 0xcd: case 0xce: case 0xcf: DSP.datain.get(&mode); DSP.datain.getw(&length); dsp_dma(DSP.datain.currentcommand(), mode, length, 0); break; // pause 8 bit DMA transfer case 0xd0: // none if (DSP.dma.mode != 0) dsp_disabledma(); break; // speaker on case 0xd1: // none DSP.speaker = 1; break; // speaker off case 0xd3: // none DSP.speaker = 0; break; // continue 8 bit DMA, see 0xd0 case 0xd4: // none if (DSP.dma.mode != 0) dsp_enabledma(); break; // pause 16 bit DMA case 0xd5: // none if (DSP.dma.mode != 0) dsp_disabledma(); break; // continue 16 bit DMA, see 0xd5 case 0xd6: // none if (DSP.dma.mode != 0) dsp_enabledma(); break; // read speaker on/off (out ff=on, 00=off) case 0xd8: // none, o1: speaker; ff/00 DSP.dataout.put( (DSP.speaker == 1)?0xff:0x00); break; // stop 16 bit auto DMA case 0xd9: // none if (DSP.dma.mode != 0) { DSP.dma.mode = 1; // no auto init anymore dsp_dmadone(); } break; // stop 8 bit auto DMA case 0xda: // none if (DSP.dma.mode != 0) { DSP.dma.mode = 1; // no auto init anymore dsp_dmadone(); } break; // used and expected by the CL diagnose.exe case 0xe0: DSP.dataout.put(0x55); break; // get version, out 2 bytes (major, minor) case 0xe1: // none, o1/2: version major.minor DSP.dataout.put(4); if (DSP.dataout.put(11) == 0) { writelog(WAVELOG(3), "DSP version couldn't be written - buffer overflow"); } break; case 0xe3: // none, output: Copyright string // the Windows driver needs the exact text, otherwise it // won't load. Same for diagnose.exe DSP.dataout.puts("COPYRIGHT (C) CREATIVE TECHNOLOGY LTD, 1992."); DSP.dataout.put(0); // need extra string end break; // used and expected by the CL diagnose.exe case 0xe4: DSP.dataout.put(0xaa); break; // Trigger 8-bit IRQ case 0xf2: DSP.dataout.put(0xaa); DSP.irqpending = 1; MIXER.reg[0x82] |= 1; // reg 82 shows the kind of IRQ BX_SB16_THIS devices->pic->trigger_irq(BX_SB16_IRQ); break; // unknown command default: writelog(WAVELOG(3), "unknown DSP command %x, ignored", DSP.datain.currentcommand()); break; } DSP.datain.clearcommand(); DSP.datain.flush(); } } // dsp_dma() initiates all kinds of dma transfers void bx_sb16_c::dsp_dma(Bit8u command, Bit8u mode, Bit16u length, Bit8u comp) { // command: 8bit, 16bit, in/out, single/auto, fifo // mode: mono/stereo, signed/unsigned // (for info on command and mode see sound blaster programmer's manual, // cmds bx and cx) // length: number of samples - not number of bytes // comp: bit-coded are: type of compression; ref-byte; highspeed // D0..D2: 0=none, 2,3,4 bits ADPCM // D3: ref-byte // D6: highspeed writelog( WAVELOG(4), "DMA initialized. Cmd %02x, mode %02x, length %d, comp %d", command, mode, length, comp); if ( (command >> 4) == 0xb ) // 0xb? = 16 bit DMA { DSP.dma.bits = 16; DSP.dma.bps = 2; } else // 0xc? = 8 bit DMA { DSP.dma.bits = 8; DSP.dma.bps = 1; } // Prevent division by zero in some instances if ( DSP.dma.samplerate == 0 ) DSP.dma.samplerate= 10752; command &= 0x0f; DSP.dma.output = 1 - (command >> 3); // 1=output, 0=input DSP.dma.mode = 1 + ( (command >> 2) & 1); // 0=none, 1=normal, 2=auto DSP.dma.fifo = (command >> 1) & 1; // ? not sure what this is DSP.dma.stereo = (mode >> 5) & 1; if (DSP.dma.stereo != 0) DSP.dma.bps *= 2; DSP.dma.blocklength = length; DSP.dma.issigned = (mode >> 4) & 1; DSP.dma.count = (DSP.dma.blocklength + 1) * DSP.dma.bps - 1; DSP.dma.highspeed = (comp >> 4) & 1; DSP.dma.chunkindex = 0; DSP.dma.chunkcount = 0; Bit32u sampledatarate = (Bit32u) DSP.dma.samplerate * (Bit32u) DSP.dma.bps; DSP.dma.timer = (Bit32u) bx_options.sb16.dmatimer / sampledatarate; writelog( WAVELOG(5), "DMA is %db, %dHz, %s, %s, mode %d, %s, %s, %d bps, %d us/b", DSP.dma.bits, DSP.dma.samplerate, (DSP.dma.stereo != 0)?"stereo":"mono", (DSP.dma.output == 1)?"output":"input", DSP.dma.mode, (DSP.dma.issigned == 1)?"signed":"unsigned", (DSP.dma.highspeed == 1)?"highspeed":"normal speed", sampledatarate, DSP.dma.timer); DSP.dma.format = DSP.dma.issigned | ( (comp & 7) << 1) | ( (comp & 8) << 4); // write the output to the device/file if (DSP.dma.output == 1) { if (bx_options.sb16.wavemode == 1) { if (DSP.outputinit == 0) { if (BX_SB16_OUTPUT->openwaveoutput(bx_options.sb16.wavefile) != BX_SOUND_OUTPUT_OK) { bx_options.sb16.wavemode = 0; writelog( WAVELOG(2), "Error: Could not open wave output device."); } else DSP.outputinit = 1; } if (DSP.outputinit == 1) BX_SB16_OUTPUT->startwaveplayback(DSP.dma.samplerate, DSP.dma.bits, DSP.dma.stereo, DSP.dma.format); } } dsp_enabledma(); } // dsp_enabledma(): Start the DMA timer and thus the transfer void bx_sb16_c::dsp_enabledma() { bx_pc_system.activate_timer( DSP.timer_handle, DSP.dma.timer, 1 ); } // dsp_disabledma(): Stop the DMA timer and thus the transfer, but don't abort it void bx_sb16_c::dsp_disabledma() { bx_pc_system.deactivate_timer( DSP.timer_handle ); } // dsp_bufferstatus() checks if the DSP is ready for data/commands Bit32u bx_sb16_c::dsp_bufferstatus() { Bit32u result = 0x7f; // MSB set -> not ready for commands if (DSP.datain.full() == 1) result |= 0x80; writelog(WAVELOG(4), "DSP Buffer status read, result %x", result); return(result); } // dsp_status() checks if the DSP is ready to send data Bit32u bx_sb16_c::dsp_status() { Bit32u result = 0x7f; // read might be to acknowledge IRQ if ( DSP.irqpending != 0 ) { DSP.irqpending = 0; MIXER.reg[0x82] &= (~0x01); writelog( WAVELOG(4), "8-bit DMA or SBMIDI IRQ acknowledged"); if (MIXER.reg[0x82] == 0) BX_SB16_THIS devices->pic->untrigger_irq(BX_SB16_IRQ); } // if buffer is not empty, there is data to be read if (DSP.dataout.empty() == 0) result |= 0x80; writelog(WAVELOG(4), "DSP output status read, result %x", result); return(result); } // dsp_irq16ack() notifies that the 16bit DMA IRQ has been acknowledged Bit32u bx_sb16_c::dsp_irq16ack() { Bit32u result = 0xff; if ( DSP.irqpending != 0 ) { DSP.irqpending = 0; MIXER.reg[0x82] &= (~0x02); if (MIXER.reg[0x82] == 0) BX_SB16_THIS devices->pic->untrigger_irq(BX_SB16_IRQ); writelog( WAVELOG(4), "16-bit DMA IRQ acknowledged"); } else writelog( WAVELOG(3), "16-bit DMA IRQ acknowledged but not active!"); return result; } // the DMA handlers // highlevel input and output handlers - rerouting to/from file,device // get a wave packet from the input device (not supported yet) void bx_sb16_c::dsp_getwavepacket() { writelog( WAVELOG(3), "DMA reads not supported. Returning silence."); // fill the buffer with silence. Watch for 16bit transfer and signed/unsigned // these are the two different bytes in 16bit transfer (both the same for 8bit) Bit8u byteA, byteB; byteA = 0x00; // compatible with all signed transfers byteB = 0x00; int i; if (DSP.dma.issigned == 0) byteB = 0x80; if (DSP.dma.bits == 8) byteA = byteB; for (i = 0; i < BX_SOUND_OUTPUT_WAVEPACKETSIZE; i++) DSP.dma.chunk[i] = ( (i & 1) == 0) ? byteA : byteB; DSP.dma.chunkcount = BX_SOUND_OUTPUT_WAVEPACKETSIZE; DSP.dma.chunkindex = 0; } // write a wave packet to the output device void bx_sb16_c::dsp_sendwavepacket() { switch (bx_options.sb16.wavemode) { case 1: BX_SB16_OUTPUT->sendwavepacket(DSP.dma.chunkindex, DSP.dma.chunk); break; case 3: fwrite(DSP.dma.chunk, 1, DSP.dma.chunkindex, WAVEDATA); break; case 2: Bit8u temparray[12] = {DSP.dma.samplerate & 0xff, DSP.dma.samplerate >> 8, 0, 0, DSP.dma.bits, DSP.dma.stereo + 1, 0, 0, 0, 0, 0, 0 }; switch ( (DSP.dma.format >> 1) & 7) { case 2: temparray[7] = 3; break; case 3: temparray[7] = 2; break; case 4: temparray[7] = 1; break; } if (DSP.dma.bits == 16) temparray[7] = 4; writevocblock(9, 12, temparray, DSP.dma.chunkindex, DSP.dma.chunk); break; } DSP.dma.chunkindex = 0; } // put a sample byte into the output buffer void bx_sb16_c::dsp_getsamplebyte(Bit8u value) { if (DSP.dma.chunkindex < BX_SOUND_OUTPUT_WAVEPACKETSIZE) DSP.dma.chunk[DSP.dma.chunkindex++] = value; if (DSP.dma.chunkindex >= BX_SOUND_OUTPUT_WAVEPACKETSIZE) dsp_sendwavepacket(); } // read a sample byte from the input buffer Bit8u bx_sb16_c::dsp_putsamplebyte() { if (DSP.dma.chunkindex >= DSP.dma.chunkcount) dsp_getwavepacket(); return DSP.dma.chunk[DSP.dma.chunkindex++]; } // called when the last byte of a DMA transfer has been received/sent void bx_sb16_c::dsp_dmadone() { writelog( WAVELOG(4), "DMA transfer done, triggering IRQ"); if ( (DSP.dma.output == 1) && (DSP.dma.mode != 2) ) { dsp_sendwavepacket(); // flush the output if (bx_options.sb16.wavemode == 1) { if (DSP.dma.mode != 2) BX_SB16_OUTPUT->stopwaveplayback(); // don't stop if Auto-DMA } else if (bx_options.sb16.wavemode == 2) fflush(WAVEDATA); } // generate the appropriate IRQ if (DSP.dma.bits == 8) MIXER.reg[0x82] |= 1; else MIXER.reg[0x82] |= 2; BX_SB16_THIS devices->pic->trigger_irq(BX_SB16_IRQ); DSP.irqpending = 1; //if auto-DMA, reinitialize if (DSP.dma.mode == 2) { DSP.dma.count = (DSP.dma.blocklength + 1) * DSP.dma.bps - 1; writelog( WAVELOG(4), "auto-DMA reinitializing to length %d", DSP.dma.count); } else { DSP.dma.mode = 0; dsp_disabledma(); } } // now the actual transfer routines, called by the DMA controller // note that read = from application to soundcard (output), // and write = from soundcard to application (input) void bx_sb16_c::dma_read8(Bit8u *data_byte) { bx_pc_system.set_DRQ(BX_SB16_DMAL, 0); // the timer will raise it again if (DSP.dma.count % 100 == 0) // otherwise it's just too many lines of log writelog( WAVELOG(5), "Received 8-bit DMA %2x, %d remaining ", *data_byte, DSP.dma.count); DSP.dma.count--; dsp_getsamplebyte(*data_byte); if (DSP.dma.count == 0xffff) // last byte received dsp_dmadone(); } void bx_sb16_c::dma_write8(Bit8u *data_byte) { bx_pc_system.set_DRQ(BX_SB16_DMAL, 0); // the timer will raise it again DSP.dma.count--; *data_byte = dsp_putsamplebyte(); if (DSP.dma.count % 100 == 0) // otherwise it's just too many lines of log writelog( WAVELOG(5), "Sent 8-bit DMA %2x, %d remaining ", *data_byte, DSP.dma.count); if (DSP.dma.count == 0xffff) // last byte sent dsp_dmadone(); } void bx_sb16_c::dma_read16(Bit16u *data_word) { bx_pc_system.set_DRQ(BX_SB16_DMAH, 0); // the timer will raise it again if (DSP.dma.count % 100 == 0) // otherwise it's just too many lines of log writelog( WAVELOG(5), "Received 16-bit DMA %4x, %d remaining ", *data_word, DSP.dma.count); DSP.dma.count -= 2; dsp_getsamplebyte(*data_word & 0xff); dsp_getsamplebyte(*data_word >> 8); if (DSP.dma.count == 0xffff) // last byte received dsp_dmadone(); } void bx_sb16_c::dma_write16(Bit16u *data_word) { Bit8u byte1, byte2; bx_pc_system.set_DRQ(BX_SB16_DMAH, 0); // the timer will raise it again DSP.dma.count -= 2; byte1 = dsp_putsamplebyte(); byte2 = dsp_putsamplebyte(); // all input is in little endian *data_word = byte1 | (byte2 << 8); if (DSP.dma.count % 100 == 0) // otherwise it's just too many lines of log writelog( WAVELOG(5), "Sent 16-bit DMA %4x, %d remaining ", *data_word, DSP.dma.count); if (DSP.dma.count == 0xffff) // last byte sent dsp_dmadone(); } // the mixer, supported type is CT1745 (as in an SB16) void bx_sb16_c::mixer_writedata(Bit32u value) { int i; if (MIXER.regindex >= BX_SB16_MIX_REG) return; // index out of range // store the value MIXER.reg[MIXER.regindex] = value; // do some action depending on what register was written switch (MIXER.regindex) { case 0: // initialize mixer writelog(BOTHLOG(4), "Initializing mixer..."); for (i=0; i 0) BX_SB16_THIS devices->unregister_irq(BX_SB16_IRQ, "SB16"); BX_SB16_IRQ = newirq; BX_SB16_THIS devices->register_irq(BX_SB16_IRQ, "SB16"); } // set the 8 bit DMA switch (MIXER.reg[0x81] & 0x0f) { case 1: BX_SB16_DMAL = 0; break; case 2: BX_SB16_DMAL = 1; break; case 8: BX_SB16_DMAL = 3; break; default: BX_SB16_DMAL = 1; writelog(BOTHLOG(3), "Bad value %02x in mixer register 0x81. DMA8 set to %d", MIXER.reg[0x81], BX_SB16_DMAL); MIXER.reg[0x81] &= (~0x0f); MIXER.reg[0x81] |= (1 << BX_SB16_DMAL); } // and the 16 bit DMA switch (MIXER.reg[0x81] >> 4) { case 0: BX_SB16_DMAH = 0; // no 16-bit DMA break; case 2: BX_SB16_DMAH = 5; break; case 4: BX_SB16_DMAH = 6; break; case 8: BX_SB16_DMAH = 7; break; default: BX_SB16_DMAH = 0; writelog(BOTHLOG(3), "Bad value %02x in mixer register 0x81. DMA16 set to %d", MIXER.reg[0x81], BX_SB16_DMAH); MIXER.reg[0x81] &= (~0xf0); // MIXER.reg[0x81] |= (1 << BX_SB16_DMAH); // no default 16 bit channel! } writelog(BOTHLOG(4), "Resources set to I%d D%d H%d", BX_SB16_IRQ, BX_SB16_DMAL, BX_SB16_DMAH); } // now the MPU 401 part // the MPU 401 status port shows if input or output are ready // Note that the bits are inverse to their meaning Bit32u bx_sb16_c::mpu_status() { Bit32u result = 0; if ( (MPU.datain.full() == 1) || ( (bx_options.sb16.midimode == 1) && (BX_SB16_OUTPUT->midiready() == BX_SOUND_OUTPUT_ERR) ) ) result |= 0x40; // output not ready if (MPU.dataout.empty() == 1) result |= 0x80; // no input available writelog(MIDILOG(4), "MPU status port, result %02x", result); return(result); } // the MPU 401 command port void bx_sb16_c::mpu_command(Bit32u value) { int i; int bytesneeded; if (MPU.cmd.hascommand() == 1) // already a command pending, abort that one { if ( (MPU.cmd.currentcommand() != value) || (MPU.cmd.commanddone() == 0) ) // it's a different command, or the old one isn't done yet, abort it { MPU.cmd.clearcommand(); MPU.cmd.flush(); } // if it's the same one, and we just completed the argument list, // we leave it as it is and process it here } if (MPU.cmd.hascommand() == 0) // no command pending, set one up { bytesneeded = 0; if ( (value >> 4) == 14) bytesneeded = 1; MPU.cmd.newcommand(value, bytesneeded); } if (MPU.cmd.commanddone() == 1) // command is complete, process it { switch (MPU.cmd.currentcommand()) { case 0x3f: writelog(MIDILOG(5), "MPU cmd: UART mode on"); MPU.uartmode=1; MPU.irqpending=1; MPU.singlecommand=0; if (BX_SB16_IRQMPU != -1) { MIXER.reg[0x82] |= 4; BX_SB16_THIS devices->pic->trigger_irq(BX_SB16_IRQMPU); } break; case 0xff: writelog(MIDILOG(4), "MPU cmd: Master reset of device"); MPU.uartmode=MPU.forceuartmode; MPU.singlecommand=0; for (i=0; i<16; i++) { MPU.banklsb[i] = 0; MPU.bankmsb[i] = 0; MPU.program[i] = 0; } MPU.cmd.reset(); MPU.dataout.reset(); MPU.datain.reset(); MPU.midicmd.reset(); /* if (BX_SB16_IRQ != -1) { MIXER.reg[0x82] |= 4; BX_SB16_THIS devices->pic->trigger_irq(BX_SB16_IRQ); } */ break; case 0xd0: // d0 and df: prefix for midi command case 0xdf: // like uart mode, but only a single command MPU.singlecommand = 1; writelog(MIDILOG(4), "MPU: prefix %02x received", MPU.cmd.currentcommand()); break; default: writelog(MIDILOG(3), "MPU cmd: unknown command %02x ignored", MPU.cmd.currentcommand()); break; } // Need to put an MPU_ACK into the data port if command successful // we'll fake it even if we didn't process the command, so as to // allow detection of the MPU 401. if (MPU.dataout.put(0xfe) == 0) writelog(MIDILOG(3), "MPU_ACK error - output buffer full"); MPU.cmd.clearcommand(); // clear the command from the buffer } } // MPU 401 data port/read: contains an MPU_ACK after receiving a command // Will contain other data as well when other than UART mode is supported Bit32u bx_sb16_c::mpu_dataread() { Bit8u res8bit; Bit32u result; // also acknowledge IRQ? if ( MPU.irqpending != 0 ) { MPU.irqpending = 0; MIXER.reg[0x82] &= (~4); if (MIXER.reg[0x82] == 0) BX_SB16_THIS devices->pic->untrigger_irq(BX_SB16_IRQMPU); writelog(MIDILOG(4), "MPU IRQ acknowledged"); } if ( MPU.dataout.get(&res8bit) == 0) { writelog(MIDILOG(3), "MPU data port not ready - no data in buffer"); result = 0xff; } else result = (Bit32u) res8bit; writelog(MIDILOG(4), "MPU data port, result %02x", result); return(result); } // MPU 401 data port/write: This is where the midi stream comes from, // as well as arguments to any pending command void bx_sb16_c::mpu_datawrite(Bit32u value) { writelog(MIDILOG(4), "write to MPU data port, value %02x", value); if (MPU.cmd.hascommand() == 1) { // there is a command pending, add arguments to it if (MPU.cmd.put(value) == 0) writelog(MIDILOG(3), "MPU Command arguments too long - buffer full"); if (MPU.cmd.commanddone() == 1) BX_SB16_THIS mpu_command(MPU.cmd.currentcommand()); } else if ( (MPU.uartmode == 0) && (MPU.singlecommand == 0) ) { // Hm? No UART mode, but still data? Maybe should send it // to the command port... Only SBMPU401.EXE does this... writelog(MIDILOG(4), "MPU Data %02x received but no UART mode. Assuming it's a command.", value); mpu_command(value); return; } else // no MPU command pending, in UART mode, this has to be midi data mpu_mididata(value); return; } // A byte of midi data has been received void bx_sb16_c::mpu_mididata(Bit32u value) { // first, find out if it is a midi command or midi data Boolean ismidicommand = 0; if (value >= 0x80) { // bit 8 usually denotes a midi command... ismidicommand = 1; if ( (value == 0xf7) && (MPU.midicmd.currentcommand() == 0xf0) ) // ...except if it is a continuing SYSEX message, then it just // denotes the end of a SYSEX chunk, not the start of a message { ismidicommand = 0; // first, it's not a command MPU.midicmd.newcommand(MPU.midicmd.currentcommand(), MPU.midicmd.bytes()); // Then, set needed bytes to current buffer // because we didn't know the length before } } if (ismidicommand == 1) { // this is a command, check if an old one is pending if (MPU.midicmd.hascommand() == 1) { writelog(MIDILOG(3), "Midi command %02x incomplete, has %d of %d bytes.", MPU.midicmd.currentcommand(), MPU.midicmd.bytes(), MPU.midicmd.commandbytes() ); // write as much as we can. Should we do this? processmidicommand(0); // clear the pending command MPU.midicmd.clearcommand(); MPU.midicmd.flush(); } // find the number of arguments to the command static const signed eventlength[] = { 2, 2, 2, 2, 1, 1, 2, 255}; // note - length 255 commands have unknown length MPU.midicmd.newcommand(value, eventlength[ (value & 0x70) >> 4 ]); } else // no command, just arguments to the old command { if (MPU.midicmd.hascommand() == 0) { // no command pending, ignore the data writelog(MIDILOG(3), "Midi data %02x received, but no command pending?", value); return; } // just some data to the command if (MPU.midicmd.put(value) == 0) writelog(MIDILOG(3), "Midi buffer overflow!"); if (MPU.midicmd.commanddone() == 1) { // the command is complete, process it writelog(MIDILOG(5), "Midi command %02x complete, has %d bytes.", MPU.midicmd.currentcommand(), MPU.midicmd.bytes() ); processmidicommand(0); // and remove the command from the buffer MPU.midicmd.clearcommand(); MPU.midicmd.flush(); } } } // The emulator port/read: See if commands were successful Bit32u bx_sb16_c::emul_read() { Bit8u res8bit; Bit32u result; if ( EMUL.datain.get(&res8bit) == 0) { writelog(3, "emulator port not ready - no data in buffer"); result = 0x00; } else result = (Bit32u) res8bit; writelog(4, "emulator port, result %02x", result); return(result); } // Emulator port/write: Changing instrument mapping etc. void bx_sb16_c::emul_write(Bit32u value) { Bit8u value8; writelog(4, "write to emulator port, value %02x", value); if (EMUL.dataout.hascommand() == 0) // no command pending, set it up { static signed char cmdlength[] = { 0, 0, 4, 2, 6, 1, 0, 0, 1, 1, 0, 1}; if (value > 11) { writelog(3, "emulator command %02x unknown, ignored.", value); return; } writelog(5, "emulator command %02x, needs %d arguments", value, cmdlength[value]); EMUL.dataout.newcommand(value, cmdlength[value]); EMUL.datain.reset(); EMUL.datain.put(0xfe); } else EMUL.dataout.put(value); // otherwise just add data if (EMUL.dataout.commanddone() == 1) { // process the command writelog(4, "executing emulator command %02x with %d arguments", EMUL.dataout.currentcommand(), EMUL.dataout.bytes()); switch (EMUL.dataout.currentcommand()) { case 0: // reinit of emulator writelog(4, "Emulator reinitialized"); EMUL.remaps = 0; EMUL.dataout.reset(); EMUL.datain.reset(); EMUL.datain.put(0xfe); break; case 1: // dummy command to reset state of emulator port // just give a few times to end any commands break; case 2: // map bank if (EMUL.remaps >= BX_SB16_PATCHTABLESIZE) break; EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].oldbankmsb)); EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].oldbanklsb)); EMUL.remaplist[EMUL.remaps].oldprogch = 0xff; EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].newbankmsb)); EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].newbanklsb)); EMUL.remaplist[EMUL.remaps].newprogch = 0xff; EMUL.datain.put(4); writelog(4, "Map bank command received, from %d %d to %d %d", EMUL.remaplist[EMUL.remaps].oldbankmsb, EMUL.remaplist[EMUL.remaps].oldbanklsb, EMUL.remaplist[EMUL.remaps].newbankmsb, EMUL.remaplist[EMUL.remaps].newbanklsb); EMUL.remaps++; break; case 3: // map program change if (EMUL.remaps >= BX_SB16_PATCHTABLESIZE) break; EMUL.remaplist[EMUL.remaps].oldbankmsb = 0xff; EMUL.remaplist[EMUL.remaps].oldbanklsb = 0xff; EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].oldprogch)); EMUL.remaplist[EMUL.remaps].newbankmsb = 0xff; EMUL.remaplist[EMUL.remaps].newbanklsb = 0xff; EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].newprogch)); EMUL.datain.put(2); writelog(4, "Map program change received, from %d to %d", EMUL.remaplist[EMUL.remaps].oldprogch, EMUL.remaplist[EMUL.remaps].newprogch); EMUL.remaps++; break; case 4: // map bank and program change if (EMUL.remaps >= BX_SB16_PATCHTABLESIZE) break; EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].oldbankmsb)); EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].oldbanklsb)); EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].oldprogch)); EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].newbankmsb)); EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].newbanklsb)); EMUL.dataout.get (& (EMUL.remaplist[EMUL.remaps].newprogch)); EMUL.datain.put(6); writelog(4, "Complete remap received, from %d %d %d to %d %d %d", EMUL.remaplist[EMUL.remaps].oldbankmsb, EMUL.remaplist[EMUL.remaps].oldbanklsb, EMUL.remaplist[EMUL.remaps].oldprogch, EMUL.remaplist[EMUL.remaps].newbankmsb, EMUL.remaplist[EMUL.remaps].newbanklsb, EMUL.remaplist[EMUL.remaps].newprogch); EMUL.remaps++; break; case 5: EMUL.dataout.get(&value8); // dump emulator state switch (value8) { case 0: EMUL.datain.puts("SB16 Emulator for Bochs\n"); break; case 1: EMUL.datain.puts("UART mode=%d (force=%d)\n", MPU.uartmode, MPU.forceuartmode); break; case 2: EMUL.datain.puts("timer=%d\n", MPU.current_timer); break; case 3: EMUL.datain.puts("%d remappings active\n", EMUL.remaps); break; case 4: EMUL.datain.puts("Resources are A%3x I%d D%d H%d T%d P%3x; Adlib at %3x\n", BX_SB16_IO, BX_SB16_IRQ, BX_SB16_DMAL, BX_SB16_DMAH, 6, BX_SB16_IOMPU, BX_SB16_IOADLIB); break; case 5: EMUL.datain.puts("Current OPL2/3 mode: %s", // ok, I admit that this is a bit ugly... (OPL.mode == single)?"single OPL2 (OPL3 disabled)\n": (OPL.mode == adlib)?"single OPL2 (no OPL3)\n": (OPL.mode == dual)?"double OPL2\n": (OPL.mode == opl3)?"OPL3\n": "unknown"); break; default: EMUL.datain.puts("no info. Only slots 0..5 have values.\n"); break; } break; case 6: // close midi and wave files and/or output if ( (bx_options.sb16.midimode == 2) || (bx_options.sb16.midimode == 3) ) { if (bx_options.sb16.midimode == 2) finishmidifile(); fclose(MIDIDATA); } else if (bx_options.sb16.midimode == 1) BX_SB16_OUTPUT->closemidioutput(); bx_options.sb16.midimode = 0; if ( (bx_options.sb16.wavemode == 2) || (bx_options.sb16.wavemode == 3) ) { if (bx_options.sb16.wavemode == 2) finishvocfile(); fclose(WAVEDATA); } else BX_SB16_OUTPUT->closewaveoutput(); bx_options.sb16.wavemode = 0; break; case 7: // clear bank/program mappings EMUL.remaps = 0; writelog(4, "Bank/program mappings cleared."); break; case 8: // set force uart mode on/off EMUL.dataout.get(&value8); MPU.forceuartmode = value8; if (value8 != 0) MPU.uartmode = MPU.forceuartmode; writelog(4, "Force UART mode = %d", MPU.forceuartmode); break; case 9: // enter specific OPL2/3 mode EMUL.dataout.get(&value8); writelog(4, "Entering OPL2/3 mode %d", value8); opl_entermode( (bx_sb16_fm_mode) value8); break; case 10: // check emulator present EMUL.datain.put(0x55); break; case 11: // send data to midi device EMUL.dataout.get(&value8); mpu_mididata(value8); } EMUL.dataout.clearcommand(); EMUL.dataout.flush(); } } // and finally the OPL (FM emulation) part // select a new operational mode for the FM part // this also serves as reset for the OPL chip void bx_sb16_c::opl_entermode(bx_sb16_fm_mode newmode) { int i, j; // do nothing if the mode is unchanged if ( OPL.mode == newmode) return; // if the old mode was 0, and the new mode is 3, then // no reset is necessary, just set the flag if ( (OPL.mode == single) && (newmode == opl3) ) { writelog( MIDILOG(4), "OPL3 mode enabled"); OPL.mode = newmode; return; } writelog( MIDILOG(4), "Switching to OPL mode %d from %d", newmode, OPL.mode); for (i=0; i> (5 + i % 2) ) != 0) // set flags only if unmasked { OPL.tflag[i/2] &= 1 << (5 + i % 2); // set the overflow flag OPL.tflag[i/2] &= 1 << 7; // set the IRQ flag } } } } // return the status of one of the OPL2's, or the // base status of the OPL3 Bit32u bx_sb16_c::opl_status(int chipid) { Bit32u status = OPL.tflag[chipid]; if ( (OPL.mode == single) || (OPL.mode == opl3) ) status |= 0x06; // this is for OPL3 detections writelog( MIDILOG(5), "OPL status of chip %d is %02x", chipid, status); return status; } // set the register index for one of the OPL2's or the // base or advanced register index for the OPL3 void bx_sb16_c::opl_index(Bit32u value, int chipid) { OPL.index[chipid] = value; } // write to the data port void bx_sb16_c::opl_data(Bit32u value, int chipid) { int index = OPL.index[chipid]; int opernum = -1; // OPL3 operator number; 0..35 int channum = -1; // OPL3 channel number; 0..17 int subopnum = -1; // channel operator; 0..nop-1 writelog( MIDILOG(4), "Write to OPL(%d) register %02x: %02x", chipid, index, value); // first find out operator and/or channel numbers // case 0x20 ... 0x95: includes too many ports, but that is harmless // case 0xe0 ... 0xf5: if ( ((index>=0x20) && (index<=0x95)) || ((index>=0xe0) && (index<=0xf5)) ) { // operator access // find the operator number. 0..17 on chip 1, 18..35 on chip 2 // note, the numbers are not continuous (again...), so we need // this rather weird calculation opernum = index & 0x07; if (opernum > 5) // invalid register, has no operator associated { opernum = -1; goto break_here; } opernum += (index & 0x18) * 6; if (opernum > 17) // Operators 18+ have to be accessed on other address set { opernum = -1; goto break_here; } if (chipid == 1) opernum += BX_SB16_FM_NOP / 2; // find out the channel number, and which of the channel's operators this is channum = opernum % 3 + ( (int) (opernum / 6) ) * 3; subopnum = 0; if ( (opernum % 6) > 2) // second operator subopnum = 1; // if (channel - 3) is in a four-operator mode, that is really // what this operator belongs to if (channum >= 3) if ( OPL.chan[channum - 3].nop == 4 ) { channum -= 3; subopnum += 2; } writelog( MIDILOG(5), "Is Channel %d, Oper %d, Subop %d", channum, opernum, subopnum); } else if ( (index>=0xa0) && (index<=0xc8) ) { // channel access channum = index & 0x0f; if (OPL.chan[channum].nop == 0) channum = -1; // the channel is disabled writelog( MIDILOG(5), "Is channel %d", channum); } break_here: switch (index & 0xff) { // WSEnable and Test Register case 0x01: OPL.wsenable[chipid] = (value >> 5) & 1; if ( (value & 0x1f) != 0) writelog( MIDILOG(3), "Warning: Test Register set to %02x", value & 0x1f); break; // the two timer counts case 0x02: case 0x03: OPL.timerinit[(index - 2) + chipid * 2] = OPL.timer[(index - 2) + chipid * 2] = value; break; // if OPL2: timer masks // if OPL3: 4-operator modes case 0x04: if ( (chipid == 0) || (OPL.mode == dual) ) opl_settimermask(value, chipid); else opl_set4opmode(value & 0x3f); break; // only OPL3: OPL3 enable case 0x05: if ( ( OPL.mode == single ) || ( OPL.mode == opl3 ) ) { if ( (value & 1) != 0) opl_entermode(opl3); else opl_entermode(single); break; } // otherwise let default: catch it // Composite Sine Wave and Note-sel (ignored) case 0x08: if (value != 0) writelog( MIDILOG(3), "Warning: write of %02x to CSW/Note-sel ignored", value); break; // most importantly the percussion part case 0xbd: opl_setpercussion(value, chipid); break; // the operator registers // case 0x20 ... 0x35: case 0x20: case 0x21: case 0x22: case 0x23: case 0x24: case 0x25: case 0x26: case 0x27: case 0x28: case 0x29: case 0x2a: case 0x2b: case 0x2c: case 0x2d: case 0x2e: case 0x2f: case 0x30: case 0x31: case 0x32: case 0x33: case 0x34: case 0x35: // case 0x60 ... 0x75: case 0x60: case 0x61: case 0x62: case 0x63: case 0x64: case 0x65: case 0x66: case 0x67: case 0x68: case 0x69: case 0x6a: case 0x6b: case 0x6c: case 0x6d: case 0x6e: case 0x6f: case 0x70: case 0x71: case 0x72: case 0x73: case 0x74: case 0x75: // case 0x80 ... 0x95: case 0x80: case 0x81: case 0x82: case 0x83: case 0x84: case 0x85: case 0x86: case 0x87: case 0x88: case 0x89: case 0x8a: case 0x8b: case 0x8c: case 0x8d: case 0x8e: case 0x8f: case 0x90: case 0x91: case 0x92: case 0x93: case 0x94: case 0x95: if (opernum != -1) { opl_changeop(channum, opernum, (index / 0x20) - 1, value); break; } // else let default: catch it // case 0x40 ... 0x55: case 0x40: case 0x41: case 0x42: case 0x43: case 0x44: case 0x45: case 0x46: case 0x47: case 0x48: case 0x49: case 0x4a: case 0x4b: case 0x4c: case 0x4d: case 0x4e: case 0x4f: case 0x50: case 0x51: case 0x52: case 0x53: case 0x54: case 0x55: if (opernum != -1) { opl_changeop(channum, opernum, 1, value & 0xc0); if (subopnum != -1) opl_setvolume(channum, subopnum, value & 0x3f); break; } // else let default: catch it // case 0xe0 ... 0xf5: case 0xe0: case 0xe1: case 0xe2: case 0xe3: case 0xe4: case 0xe5: case 0xe6: case 0xe7: case 0xe8: case 0xe9: case 0xea: case 0xeb: case 0xec: case 0xed: case 0xee: case 0xef: case 0xf0: case 0xf1: case 0xf2: case 0xf3: case 0xf4: case 0xf5: if (opernum != -1) { opl_changeop(channum, opernum, 5, value & 0x07); break; } // else let default: catch it // and the channel registers // case 0xa0 ... 0xa8: case 0xa0: case 0xa1: case 0xa2: case 0xa3: case 0xa4: case 0xa5: case 0xa6: case 0xa7: case 0xa8: if (channum != -1) { OPL.chan[channum].freq &= 0xff00; OPL.chan[channum].freq |= value; if ( (OPL.chan[channum].freqch |= 1) == 3) opl_setfreq(channum); break; } // else let default: catch it // case 0xb0 ... 0xb8: case 0xb0: case 0xb1: case 0xb2: case 0xb3: case 0xb4: case 0xb5: case 0xb6: case 0xb7: case 0xb8: if (channum != -1) { OPL.chan[channum].freq &= 0x00ff; OPL.chan[channum].freq |= (value & 0x1f) << 8; if ( (OPL.chan[channum].freqch |= 2) == 3) opl_setfreq(channum); opl_keyonoff(channum, (value >> 5) & 1); break; } // else let default: catch it // this is a channel access, but it belongs to the instrument // definition, so put it into value [4] of the channel's first operator // case 0xc0 ... 0xc8: case 0xc0: case 0xc1: case 0xc2: case 0xc3: case 0xc4: case 0xc5: case 0xc6: case 0xc7: case 0xc8: if (channum != -1) { int needchange = 0; if ((OPL.oper[OPL.chan[channum].opnum[0]][4] & 1) != (value & 1)) needchange = 1; opl_changeop(channum, OPL.chan[channum].opnum[0], 4, value & 0x3f); if (needchange == 1) opl_setmodulation(channum); break; } // else let default: catch it default: writelog( MIDILOG(3), "Attempt to write %02x to unknown OPL(%d) register %02x", value, chipid, index); break; } } // change a value of an operator void bx_sb16_c::opl_changeop(int channum, int opernum, int byte, int value) { if (OPL.oper[opernum][byte] != value) { OPL.oper[opernum][byte] = value; OPL.chan[channum].needprogch = 1; } } // called for a write to the 4-operator mode register void bx_sb16_c::opl_set4opmode(int new4opmode) { int i, channel1, channel2; writelog( MIDILOG(4), "Switching to 4-op mode %02x", new4opmode); // every bit switches a 4-op channel-pairing on or off // 4-op mode is two channels combined into the first one for (i = 0; i<6; i++) { channel1 = i + (i / 3) * 6; channel2 = channel1 + 3; if ( ( (new4opmode >> i) & 1) != 0) { // enable 4-op mode opl_keyonoff(channel1, 0); opl_keyonoff(channel2, 0); OPL.chan[channel1].nop = 4; OPL.chan[channel2].nop = 0; OPL.chan[channel1].needprogch = 1; } else { // disable 4-op mode opl_keyonoff(channel1, 0); OPL.chan[channel1].nop = 2; OPL.chan[channel2].nop = 2; OPL.chan[channel1].needprogch = 1; OPL.chan[channel2].needprogch = 1; } } } // called for a write to port 4 of either chip void bx_sb16_c::opl_settimermask(int value, int chipid) { if ( (value & 0x80) != 0) // reset IRQ and timer flags { // all other bits ignored! writelog( MIDILOG(5), "IRQ Reset called"); OPL.tflag[chipid] = 0; return; } OPL.tmask[chipid] = value & 0x63; writelog( MIDILOG(5), "New timer mask for chip %d is %02x", chipid, OPL.tmask[chipid]); // do we have to activate or deactivate the timer? if ( ( (value & 0x03) != 0) ^ (OPL.timer_running != 0) ) if ( (value & 0x03) != 0) // yes, it's different. Start or stop? { writelog( MIDILOG(5), "Starting timers"); bx_pc_system.activate_timer( OPL.timer_handle, 0, 1); OPL.timer_running = 1; } else { writelog( MIDILOG(5), "Stopping timers"); bx_pc_system.deactivate_timer( OPL.timer_handle ); OPL.timer_running = 0; } } // called when the modulation mode of a channel changes void bx_sb16_c::opl_setmodulation(int channel) { int opernum = OPL.chan[channel].opnum[0]; if ( (OPL.chan[channel].nop == 0) && (channel >= 3) && (OPL.chan[channel].nop == 4) ) channel -= 3; if (OPL.chan[channel].nop == 2) { OPL.chan[channel].ncarr = (OPL.oper[opernum][4] & 1) + 1; OPL.chan[channel].needprogch = 1; } else if (OPL.chan[channel].nop == 4) { int opernum2 = OPL.chan[channel].opnum[2]; int modmode = (OPL.oper[opernum][4] & 1) | ( (OPL.oper[opernum2][4] & 1) >> 1); OPL.chan[channel].ncarr = modmode + 1 - (modmode / 2); OPL.chan[channel].needprogch = 1; } } // called for a write to register 0xbd, the percussion register void bx_sb16_c::opl_setpercussion(Bit8u value, int chipid) { UNUSED(value); UNUSED(chipid); } // called when a channel volume changes // opnum is which of the channel's operators had the change, not // the actual operator number. Thus, it's from 0..3. void bx_sb16_c::opl_setvolume(int channel, int opnum, int outlevel) { UNUSED(opnum); UNUSED(outlevel); OPL.chan[channel].midivol = 127; } // called when a frequency change is complete, to find out the // corresponding midi key and pitch bender values void bx_sb16_c::opl_setfreq(int channel) { int block,fnum; OPL.chan[channel].freqch = 0; // definition: // low-byte of freq: 8 bit F-Number, LSB's // high-byte of freq: [2 reserved][KEY-ON][3 block][2 F-Number MSB's] // [KEY-ON] is ignored by this function // // the definition of the F-number is // F-Number = Frequency * 2**(20-block) / (49716 Hz) // // Thus, the frequency can be calculated as // Frequency = F-Number / 2**(20-block) * 49716 Hz // // (But remember that afreq is in 10^-3 Hz!) // fnum = OPL.chan[channel].freq & 0x3ff; block = (OPL.chan[channel].freq >> 10) & 0x07; writelog( MIDILOG(5), "F-Num is %d, block is %d", fnum, block); Bit32u realfreq; const Bit32u freqbase = 49716000; // const is better than #define if type is important // this is a bit messy to preserve accuracy as much as possible, // otherwise we might either lose precision, or the higher bits. if (block < 16) realfreq = ( (freqbase >> 4) * fnum) >> (16 - block); else realfreq = (freqbase * fnum) >> (20 - block); OPL.chan[channel].afreq = realfreq; // now find out what MIDI key this corresponds to, and with what // pitch bender value... (the latter not implemented yet) int octave=0; // 0: Octave from 523.2511 Hz; pos=higher, neg=lower int keynum=0; // 0=C; 1=C#; 2=D; ...; 11=B if (realfreq > 8175) // 8.175 is smallest possible frequency { const Bit32u freqC = 523251; // Midi note 72; "C": 523.251 Hz Bit32u keyfreq; // Frequency scaled to the octave from freqC to 2*freqC if (realfreq > freqC) { while ( (realfreq >> (++octave)) > freqC); keyfreq = realfreq >> (--octave); } else { while ( (realfreq << (++octave)) < freqC); keyfreq = realfreq << (--octave); octave = -octave; } // this is a reasonable approximation for keyfreq /= 1.059463 // (that value is 2**(1/12), which is the difference between two keys) while ( (keyfreq -= ( (keyfreq * 1000) / 17817) ) > freqC) keynum++; } else { octave = -6; keynum = 0; } OPL.chan[channel].midinote = (octave + 6) * 12 + keynum; writelog( MIDILOG(5), "New frequency %.3f is key %d in octave %d; midi note %d", (float) realfreq/1000.0, keynum, octave, OPL.chan[channel].midinote); } // called when a note is possibly turned on or off void bx_sb16_c::opl_keyonoff(int channel, Boolean onoff) { int i; // first check if there really is a change in the state if (onoff == OPL.chan[channel].midion) return; Bit8u commandbytes[3]; // check if we have a midi channel, otherwise allocate one if possible if (OPL.chan[channel].midichan == 0xff) { for (i=0; i<16; i++) if ( ( ( OPL.midichannels >> i) & 1 ) != 0) { OPL.chan[channel].midichan = i; OPL.midichannels &= ~(1 << i); // mark channel as used OPL.chan[channel].needprogch = 1; } if (OPL.chan[channel].midichan == 0xff) return; } if (OPL.chan[channel].needprogch != 0) opl_midichannelinit(channel); commandbytes[0] = OPL.chan[channel].midichan; commandbytes[1] = OPL.chan[channel].midinote; commandbytes[2] = 0; if (onoff == 0) commandbytes[0] |= 0x80; // turn it off else { commandbytes[0] |= 0x90; // turn it on commandbytes[1] = OPL.chan[channel].midivol; } writemidicommand(commandbytes[1], 2, & (commandbytes[1]) ); } // setup a midi channel void bx_sb16_c::opl_midichannelinit(int channel) { UNUSED(channel); } /* Handlers for the midi commands/midi file output */ // Write the header of the midi file. Track length is 0x7fffffff // until we know how long it's really going to be void bx_sb16_c::initmidifile() { struct { Bit8u chunk[4]; Bit32u chunklen; // all values in BIG Endian! Bit16u smftype; Bit16u tracknum; Bit16u timecode; // 0x80 + deltatimesperquarter << 8 } midiheader = #ifdef BX_LITTLE_ENDIAN { "MTh", 0x06000000, 0x0100, 0x0100, 0x8001 }; #else { "MTh", 6, 1, 1, 0x180 }; #endif midiheader.chunk[3] = 'k'; struct { Bit8u chunk[4]; Bit32u chunklen; Bit8u data[15]; } trackheader = #ifdef BX_LITTLE_ENDIAN { "MTr", 0xffffff7f, #else { "MTr", 0x7fffffff, #endif { 0x00,0xff,0x51,3,0x07,0xa1,0x20, // set tempo 120 (0x7a120 us per quarter) 0x00,0xff,0x58,4,4,2,0x18,0x08 }}; // time sig 4/4 trackheader.chunk[3] = 'k'; fwrite(&midiheader, 1, 14, MIDIDATA ); fwrite(&trackheader, 1, 23, MIDIDATA ); return; } // write the midi command to the midi file void bx_sb16_c::writemidicommand(int command, int length, Bit8u data[]) { /* We need to determine the time elapsed since the last MIDI command */ int deltatime = currentdeltatime(); /* Initialize output device if necessary and not done yet */ if (bx_options.sb16.midimode == 1) { if (MPU.outputinit != 1) { writelog( MIDILOG(4), "Initializing Midi output."); if (BX_SB16_OUTPUT->openmidioutput(bx_options.sb16.midifile) == BX_SOUND_OUTPUT_OK) MPU.outputinit = 1; else MPU.outputinit = 0; if (MPU.outputinit != 1) { writelog( MIDILOG(2), "Error: Couldn't open midi output. Midi disabled."); bx_options.sb16.midimode = 0; } } BX_SB16_OUTPUT->sendmidicommand(deltatime, command, length, data); return; } else if (bx_options.sb16.midimode < 2) return; if (bx_options.sb16.midimode == 2) writedeltatime(deltatime); fputc(command, MIDIDATA); if ( (command == 0xf0) || (command == 0xf7) ) // write event length for sysex/meta events writedeltatime(length); fwrite(data, 1, length, MIDIDATA); } // determine how many delta times have passed since // this function was called last int bx_sb16_c::currentdeltatime() { int deltatime; // counting starts at first access if (MPU.last_delta_time == 0xffffffff) MPU.last_delta_time = MPU.current_timer; deltatime = MPU.current_timer - MPU.last_delta_time; MPU.last_delta_time = MPU.current_timer; return deltatime; } // process the midi command stored in MPU.midicmd.to the midi driver void bx_sb16_c::processmidicommand(Boolean force) { int i, channel; Bit8u value; Boolean needremap = 0; channel = MPU.midicmd.currentcommand() & 0xf; // we need to log bank changes and program changes if ( (MPU.midicmd.currentcommand() >> 4) == 0xc) { // a program change value = MPU.midicmd.peek(0); writelog(MIDILOG(1), "* ProgramChange channel %d to %d", channel, value); MPU.program[channel] = value; needremap = 1; } else if ( (MPU.midicmd.currentcommand() >> 4) == 0xb) { // a control change, could be a bank change if (MPU.midicmd.peek(0) == 0) { // bank select MSB value = MPU.midicmd.peek(1); writelog(MIDILOG(1), "* BankSelectMSB (%x %x %x) channel %d to %d", MPU.midicmd.peek(0), MPU.midicmd.peek(1), MPU.midicmd.peek(2), channel, value); MPU.bankmsb[channel] = value; needremap = 1; } else if (MPU.midicmd.peek(0) == 32) { // bank select LSB value = MPU.midicmd.peek(1); writelog(MIDILOG(1), "* BankSelectLSB channel %d to %d", channel, value); MPU.banklsb[channel] = value; needremap = 1; } } Bit8u temparray[256]; i = 0; while (MPU.midicmd.empty() == 0) MPU.midicmd.get( &(temparray[i++]) ); writemidicommand(MPU.midicmd.currentcommand(), i, temparray); // if single command, revert to command mode if (MPU.singlecommand != 0) { MPU.singlecommand = 0; // and trigger IRQ? // MPU.irqpending = 1; // BX_SB16_THIS devices->pic->trigger_irq(BX_SB16_IRQMPU); } if ( (force == 0) && (needremap == 1) ) // have to check the remap lists, and remap program change if necessary midiremapprogram(channel); } // check if a program change has to be remapped, and do it if necessary void bx_sb16_c::midiremapprogram(int channel) { int bankmsb,banklsb,program; Bit8u commandbytes[2]; bankmsb = MPU.bankmsb[channel]; banklsb = MPU.banklsb[channel]; program = MPU.program[channel]; for (int i = 0; i < EMUL.remaps; i++) { if ( ( (EMUL.remaplist[i].oldbankmsb == bankmsb) || (EMUL.remaplist[i].oldbankmsb == 0xff) ) && ( (EMUL.remaplist[i].oldbanklsb == banklsb) || (EMUL.remaplist[i].oldbanklsb == 0xff) ) && ( (EMUL.remaplist[i].oldprogch == program) || (EMUL.remaplist[i].oldprogch == 0xff) ) ) { writelog(5, "Remapping instrument for channel %d", channel); if ( (EMUL.remaplist[i].newbankmsb != bankmsb) && (EMUL.remaplist[i].newbankmsb != 0xff) ) { // write control change bank msb MPU.bankmsb[channel] = EMUL.remaplist[i].newbankmsb; commandbytes[0] = 0; commandbytes[1] = EMUL.remaplist[i].newbankmsb; writemidicommand(0xb0 | channel, 2, commandbytes); } if ( (EMUL.remaplist[i].newbanklsb != banklsb) && (EMUL.remaplist[i].newbanklsb != 0xff) ) { // write control change bank lsb MPU.banklsb[channel] = EMUL.remaplist[i].newbanklsb; commandbytes[0] = 32; commandbytes[1] = EMUL.remaplist[i].newbanklsb; writemidicommand(0xb0 | channel, 2, commandbytes); } if ( (EMUL.remaplist[i].newprogch != program) && (EMUL.remaplist[i].newprogch != 0xff) ) { // write program change MPU.program[channel] = EMUL.remaplist[i].newprogch; commandbytes[0] = EMUL.remaplist[i].newprogch; writemidicommand(0xc0 | channel, 1, commandbytes); } } } } // convert a number into a delta time coded value int bx_sb16_c::converttodeltatime(Bit32u deltatime, Bit8u value[4]) { int i, count; Bit8u outbytes[4]; count = 0; if (deltatime <= 0) { count = 1; value[0] = 0; } else { while ( (deltatime > 0) && (count < 4) ) // split into parts { // of seven bits outbytes[count++] = deltatime & 0x7f; deltatime >>= 7; }; for (i=0; i> 24) | ((tracklen & 0x00ff0000) >> 8) | ((tracklen & 0x0000ff00) << 8); #endif fwrite(&tracklen, 4, 1, MIDIDATA); return; } /* Handlers for the voc file output */ // Write the header of the voc file. void bx_sb16_c::initvocfile() { struct { char id[20]; Bit16u headerlen; // All in LITTLE Endian! Bit16u version; Bit16u chksum; } vocheader = { "Creative Voice File", #ifdef BX_LITTLE_ENDIAN 0x1a, 0x0114, 0x111f }; #else 0x1a00, 0x1401, 0x1f11 }; #endif vocheader.id[19] = 26; // Replace string end with 26 fwrite(&vocheader, 1, sizeof vocheader, WAVEDATA); } // write one block to the voc file void bx_sb16_c::writevocblock(int block, Bit32u headerlen, Bit8u header[], Bit32u datalen, Bit8u data[]) { Bit32u i; if (block > 9) { writelog( WAVELOG(3), "VOC Block %d not recognized, ignored.", block); return; } fputc(block, WAVEDATA); i = headerlen + datalen; #ifdef BX_LITTLE_ENDIAN fwrite(&i, 1, 3, WAVEDATA); // write the length in 24-bit little endian #else Bit8u lengthbytes[3]; lengthbytes[0] = i & 0xff; i >>= 8; lengthbytes[1] = i & 0xff; i >>= 8; lengthbytes[2] = i & 0xff; fwrite(lengthbytes, 1, 3, WAVEDATA); #endif writelog( WAVELOG(5), "Voc block %d; Headerlen %d; Datalen %d", block, headerlen, datalen ); if (headerlen > 0) fwrite(header, 1, headerlen, WAVEDATA); if (datalen > 0) fwrite(data, 1, datalen, WAVEDATA); } // close the voc file void bx_sb16_c::finishvocfile() { fputc(0, WAVEDATA); // blocktype 0: end block } // static IO port read callback handler // redirects to non-static class handler to avoid virtual functions Bit32u bx_sb16_c::read_handler(void *this_ptr, Bit32u address, unsigned io_len) { #if !BX_USE_SB16_SMF bx_sb16_c *class_ptr = (bx_sb16_c *) this_ptr; return( class_ptr->read(address, io_len) ); } Bit32u bx_sb16_c::read(Bit32u address, unsigned io_len) { #else UNUSED(this_ptr); #endif // !BX_USE_SB16_SMF // we support only byte access to the port if (io_len != 1) { writelog(3, "Read access to %03x not byte access, len=%d!", address, io_len); return(0xff); } switch (address) { // 2x0: FM Music Status Port // 2x8 and 388 are aliases case BX_SB16_IO + 0x00: case BX_SB16_IO + 0x08: case BX_SB16_IOADLIB + 0x00: return opl_status(0); // 2x1: reserved (w: FM Music Data Port) // 2x9 and 389 are aliases case BX_SB16_IO + 0x01: case BX_SB16_IO + 0x09: case BX_SB16_IOADLIB + 0x01: break; // 2x2: Advanced Music Status Port // or (for SBPro1) FM Music Status Port 2 // 38a is an alias case BX_SB16_IO + 0x02: case BX_SB16_IOADLIB + 0x02: return opl_status(1); // 2x3: reserved (w: Adv. FM Music Data Port) // or (for SBPro1) FM Music Data Port 2 // 38b is an alias case BX_SB16_IO + 0x03: case BX_SB16_IOADLIB + 0x03: break; // 2x4: reserved (w: Mixer Register Port) case BX_SB16_IO + 0x04: break; // 2x5: Mixer Data Port case BX_SB16_IO + 0x05: return mixer_readdata(); // 2x6: reserved (w: DSP Reset) case BX_SB16_IO + 0x06: break; // 2x7: reserved case BX_SB16_IO + 0x07: break; // 2x8: FM Music Status Port (OPL-2) // handled above // 2x9: reserved (w: FM Music Data Port) // handled above // 2xa: DSP Read Data Port case BX_SB16_IO + 0x0a: return dsp_dataread(); // 2xb: reserved case BX_SB16_IO + 0x0b: break; // 2xc: DSP Buffer Status Port case BX_SB16_IO + 0x0c: return dsp_bufferstatus(); // 2xd: reserved case BX_SB16_IO + 0x0d: break; // 2xe: DSP Data Status Port case BX_SB16_IO + 0x0e: return dsp_status(); // 2xf: DSP Acknowledge 16bit DMA IRQ case BX_SB16_IO + 0x0f: return dsp_irq16ack(); // 3x0: MPU Data Port Read case BX_SB16_IOMPU + 0x00: return mpu_dataread(); // 3x1: MPU Status Port case BX_SB16_IOMPU + 0x01: return mpu_status(); // 3x2: reserved case BX_SB16_IOMPU + 0x02: break; // 3x3: *Emulator* Port case BX_SB16_IOMPU + 0x03: return emul_read(); } // If we get here, the port wasn't valid writelog(3, "Read access to %03x for %d: unsupported port!", address, io_len); return(0xff); } // static IO port write callback handler // redirects to non-static class handler to avoid virtual functions void bx_sb16_c::write_handler(void *this_ptr, Bit32u address, Bit32u value, unsigned io_len) { #if !BX_USE_SB16_SMF bx_sb16_c *class_ptr = (bx_sb16_c *) this_ptr; class_ptr->write(address, value, io_len); } void bx_sb16_c::write(Bit32u address, Bit32u value, unsigned io_len) { #else UNUSED(this_ptr); #endif // !BX_USE_SB16_SMF // we only support byte access to the prot if (io_len != 1) { writelog(3, "Write access to %03x for %d to %02x: " "not byte access!", address, io_len, value); return; } switch (address) { // 2x0: FM Music Register Port // 2x8 and 388 are aliases case BX_SB16_IO + 0x00: case BX_SB16_IO + 0x08: case BX_SB16_IOADLIB + 0x00: opl_index(value, 0); return; // 2x1: FM Music Data Port // 2x9 and 389 are aliases case BX_SB16_IO + 0x01: case BX_SB16_IO + 0x09: case BX_SB16_IOADLIB + 0x01: opl_data(value, 0); return; // 2x2: Advanced FM Music Register Port // or (for SBPro1) FM Music Register Port 2 // 38a is an alias case BX_SB16_IO + 0x02: case BX_SB16_IOADLIB + 0x02: opl_index(value, 1); return; // 2x3: Advanced FM Music Data Port // or (for SBPro1) FM Music Data Port 2 // 38b is an alias case BX_SB16_IO + 0x03: case BX_SB16_IOADLIB + 0x03: opl_data(value, 1); return; // 2x4: Mixer Register Port case BX_SB16_IO + 0x04: mixer_writeregister(value); return; // 2x5: Mixer Data Portr, case BX_SB16_IO + 0x05: mixer_writedata(value); return; // 2x6: DSP Reset case BX_SB16_IO + 0x06: dsp_reset(value); return; // 2x7: reserved case BX_SB16_IO + 0x07: break; // 2x8: FM Music Register Port (OPL-2) // handled above // 2x9: FM Music Data Port // handled above // 2xa: reserved (r: DSP Data Port) case BX_SB16_IO + 0x0a: break; // 2xb: reserved case BX_SB16_IO + 0x0b: break; // 2xc: DSP Write Command/Data case BX_SB16_IO + 0x0c: dsp_datawrite(value); return; // 2xd: reserved case BX_SB16_IO + 0x0d: break; // 2xe: reserved (r: DSP Buffer Status) case BX_SB16_IO + 0x0e: break; // 2xf: reserved case BX_SB16_IO + 0x0f: break; // 3x0: MPU Command Port case BX_SB16_IOMPU + 0x00: mpu_datawrite(value); return; // 3x1: MPU Data Port case BX_SB16_IOMPU + 0x01: mpu_command(value); return; // 3x2: reserved case BX_SB16_IOMPU + 0x02: break; // 3x3: *Emulator* Port case BX_SB16_IOMPU + 0x03: emul_write(value); return; } // if we arrive here, the port is unsupported writelog(3, "Write access to %03x for %d to %02x: unsupported port!", address, io_len, value); return; } void bx_sb16_c::writelog(int loglevel, const char *str, ...) { // append a line to the log file, if desired if ( (int) bx_options.sb16.loglevel >= loglevel) { time_t timep = time(NULL); tm *t = localtime(&timep); BX_INFO(( "SB16 %02d:%02d:%02d (%i): ", t->tm_hour, t->tm_min, t->tm_sec, loglevel )); va_list ap; va_start(ap, str); vfprintf(LOGFILE, str, ap); va_end(ap); fprintf(LOGFILE, "\n"); fflush(LOGFILE); } } // the round-robin FIFO buffers of the SB16 bx_sb16_buffer::bx_sb16_buffer() { length = 0; // total bytes in buffer head = 0; // pointer to next slot available for new data tail = 0; // pointer to next slot to be read from buffer = NULL; // pointer to the actual data } void bx_sb16_buffer::init(int bufferlen) { if (buffer != NULL) // Was it initialized before? delete buffer; length = bufferlen; buffer = new Bit8u[length]; if (buffer == NULL) length = 0; // This will be checked later reset(); } void bx_sb16_buffer::reset() { head = 0; // Reset the pointers tail = 0; clearcommand(); // no current command set } bx_sb16_buffer::~bx_sb16_buffer(void) { if (buffer != NULL) delete buffer; buffer = NULL; length = 0; } // Report how many bytes are available int bx_sb16_buffer::bytes(void) { if (empty() != 0) return 0; // empty / not initialized int bytes = head - tail; if (bytes < 0) bytes += length; return (bytes); } // This puts one byte into the buffer Boolean bx_sb16_buffer::put(Bit8u data) { if (full() != 0) return 0; // buffer full buffer[head++] = data; // Write data, and increase write pointer head %= length; // wrap it around so it stays inside the data return 1; // put was successful } // This writes a formatted string to the buffer Boolean bx_sb16_buffer::puts(char *data, ...) { if (data == NULL) return 0; // invalid string //char string[length]; char *string; int index = 0; string = (char *) malloc(length); va_list ap; va_start(ap, data); vsprintf(string, data, ap); va_end(ap); if ( (int) strlen(string) >= length) BX_PANIC(("bx_sb16_buffer: puts() too long!\n")); while (string[index] != 0) { if (put( (Bit8u) string[index]) == 0) return 0; // buffer full index++; } return 1; } // This returns if the buffer is full, i.e. if a put will fail Boolean bx_sb16_buffer::full(void) { if (length == 0) return 1; // not initialized if ( ((head + 1) % length) == tail) return 1; // buffer full return 0; // buffer has some space left } // This reads the next available byte from the buffer Boolean bx_sb16_buffer::get(Bit8u *data) { if (empty() != 0) { // Buffer is empty. Still, if it was initialized, return // the last byte again. if ( length > 0 ) (*data) = buffer[ (tail - 1) % length ]; return 0; // buffer empty } (*data) = buffer[tail++]; // read data and increase read pointer tail %= length; // and wrap it around to stay inside the data return 1; // get was successful } // Read a word in lo/hi order Boolean bx_sb16_buffer::getw(Bit16u *data) { Bit8u dummy; if (bytes() < 2) { if (bytes() == 1) { get(&dummy); *data = (Bit16u) dummy; } else dummy = 0; return 0; } get(&dummy); *data = (Bit16u) dummy; get(&dummy); *data |= ( (Bit16u) dummy ) << 8; return 1; } // Read a word in hi/lo order Boolean bx_sb16_buffer::getw1(Bit16u *data) { Bit8u dummy; if (bytes() < 2) { if (bytes() == 1) { get(&dummy); *data = ( (Bit16u) dummy ) << 8; } else dummy = 0; return 0; } get(&dummy); *data = ( (Bit16u) dummy ) << 8; get(&dummy); *data |= (Bit16u) dummy; return 1; } // This returns if the buffer is empty, i.e. if a get will fail Boolean bx_sb16_buffer::empty(void) { if (length == 0) return 1; // not inialized if (head == tail) return 1; // buffer empty return 0; // buffer contains data } // Flushes the buffer void bx_sb16_buffer::flush(void) { tail = head; return; } // Peeks ahead in the buffer // Warning: No checking if result is valid. Must call bytes() to check that! Bit8u bx_sb16_buffer::peek(int offset) { return buffer[ (tail + offset) % length ]; } // Set a new active command void bx_sb16_buffer::newcommand(Bit8u newcmd, int bytes) { command = newcmd; havecommand = 1; bytesneeded = bytes; } // Return the currently active command Bit8u bx_sb16_buffer::currentcommand(void) { return command; } // Clear the active command void bx_sb16_buffer::clearcommand(void) { command = 0; havecommand = 0; bytesneeded = 0; } // return if the command has received all necessary bytes Boolean bx_sb16_buffer::commanddone(void) { if (hascommand() == 0) return 0; // no command pending - not done then if (bytes() >= bytesneeded) return 1; // yes, it's done return 0; // no, it's not } // return if there is a command pending Boolean bx_sb16_buffer::hascommand(void) { return havecommand; } int bx_sb16_buffer::commandbytes(void) { return bytesneeded; } // The dummy output functions. They don't do anything bx_sound_output_c::bx_sound_output_c(bx_sb16_c *sb16) { UNUSED(sb16); } bx_sound_output_c::~bx_sound_output_c() { } int bx_sound_output_c::waveready() { return BX_SOUND_OUTPUT_OK; } int bx_sound_output_c::midiready() { return BX_SOUND_OUTPUT_OK; } int bx_sound_output_c::openmidioutput(char *device) { UNUSED(device); return BX_SOUND_OUTPUT_OK; } int bx_sound_output_c::sendmidicommand(int delta, int command, int length, Bit8u data[]) { UNUSED(delta); UNUSED(command); UNUSED(length); UNUSED(data); return BX_SOUND_OUTPUT_OK; } int bx_sound_output_c::closemidioutput() { return BX_SOUND_OUTPUT_OK; } int bx_sound_output_c::openwaveoutput(char *device) { UNUSED(device); return BX_SOUND_OUTPUT_OK; } int bx_sound_output_c::startwaveplayback(int frequency, int bits, int stereo, int format) { UNUSED(frequency); UNUSED(bits); UNUSED(stereo); UNUSED(format); return BX_SOUND_OUTPUT_OK; } int bx_sound_output_c::sendwavepacket(int length, Bit8u data[]) { UNUSED(length); UNUSED(data); return BX_SOUND_OUTPUT_OK; } int bx_sound_output_c::stopwaveplayback() { return BX_SOUND_OUTPUT_OK; } int bx_sound_output_c::closewaveoutput() { return BX_SOUND_OUTPUT_OK; }