///////////////////////////////////////////////////////////////////////// // $Id: cpu.cc,v 1.52 2002-09-24 18:33:37 kevinlawton Exp $ ///////////////////////////////////////////////////////////////////////// // // Copyright (C) 2001 MandrakeSoft S.A. // // MandrakeSoft S.A. // 43, rue d'Aboukir // 75002 Paris - France // http://www.linux-mandrake.com/ // http://www.mandrakesoft.com/ // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public // License as published by the Free Software Foundation; either // version 2 of the License, or (at your option) any later version. // // This library is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // Lesser General Public License for more details. // // You should have received a copy of the GNU Lesser General Public // License along with this library; if not, write to the Free Software // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #define BX_INSTR_SPY 0 #define NEED_CPU_REG_SHORTCUTS 1 #include "bochs.h" #define LOG_THIS BX_CPU_THIS_PTR #if BX_USE_CPU_SMF #define this (BX_CPU(0)) #endif #if BX_EXTERNAL_DEBUGGER #include "cpu/extdb.h" #endif #if BX_SIM_ID == 0 // only need to define once // This array defines a look-up table for the even parity-ness // of an 8bit quantity, for optimal assignment of the parity bit // in the EFLAGS register const Boolean bx_parity_lookup[256] = { 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1 }; #endif #if BX_SMP_PROCESSORS==1 // single processor simulation, so there's one of everything BX_CPU_C bx_cpu; BX_MEM_C bx_mem; #else // multiprocessor simulation, we need an array of cpus and memories BX_CPU_C *bx_cpu_array[BX_SMP_PROCESSORS]; BX_MEM_C *bx_mem_array[BX_ADDRESS_SPACES]; #endif // notes: // // check limit of CS? #ifdef REGISTER_IADDR extern void REGISTER_IADDR(bx_addr addr); #endif // The CHECK_MAX_INSTRUCTIONS macro allows cpu_loop to execute a few // instructions and then return so that the other processors have a chance to // run. This is used only when simulating multiple processors. // // If maximum instructions have been executed, return. A count less // than zero means run forever. #define CHECK_MAX_INSTRUCTIONS(count) \ if (count >= 0) { \ count--; if (count == 0) return; \ } #if BX_SMP_PROCESSORS==1 # define BX_TICK1_IF_SINGLE_PROCESSOR() BX_TICK1() #else # define BX_TICK1_IF_SINGLE_PROCESSOR() #endif // Make code more tidy with a few macros. #if BX_SUPPORT_X86_64==0 #define RIP EIP #define RSP ESP #endif #if BX_DYNAMIC_TRANSLATION == 0 void BX_CPU_C::cpu_loop(Bit32s max_instr_count) { unsigned ret; bxInstruction_c *i; bxInstruction_c iStorage BX_CPP_AlignN(32); i = &iStorage; #if BX_USE_CPU_SMF #define DeclareExecute() void (*execute)(bxInstruction_c *) #define DeclareResolveModRM() void (*resolveModRM)(bxInstruction_c *) #else #define DeclareExecute() void (BX_CPU_C::*execute)(bxInstruction_c *) #define DeclareResolveModRM() void (BX_CPU_C::*resolveModRM)(bxInstruction_c *) #endif DeclareExecute(); #if BX_DEBUGGER BX_CPU_THIS_PTR break_point = 0; #ifdef MAGIC_BREAKPOINT BX_CPU_THIS_PTR magic_break = 0; #endif BX_CPU_THIS_PTR stop_reason = STOP_NO_REASON; #endif (void) setjmp( BX_CPU_THIS_PTR jmp_buf_env ); // We get here either by a normal function call, or by a longjmp // back from an exception() call. In either case, commit the // new EIP/ESP, and set up other environmental fields. This code // mirrors similar code below, after the interrupt() call. BX_CPU_THIS_PTR prev_eip = RIP; // commit new EIP BX_CPU_THIS_PTR prev_esp = RSP; // commit new ESP BX_CPU_THIS_PTR EXT = 0; BX_CPU_THIS_PTR errorno = 0; main_cpu_loop: // First check on events which occurred for previous instructions // (traps) and ones which are asynchronous to the CPU // (hardware interrupts). if (BX_CPU_THIS_PTR async_event) goto handle_async_event; async_events_processed: #if BX_DEBUGGER { Bit32u debug_eip = BX_CPU_THIS_PTR prev_eip; if ( dbg_is_begin_instr_bpoint( BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, debug_eip, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base + debug_eip, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b) ) { return; } } #endif // #if BX_DEBUGGER #if BX_INSTR_SPY { int n=0; if ((n & 0xffffff) == 0) { Bit32u cs = BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value; Bit32u rip = BX_CPU_THIS_PTR prev_eip; fprintf (stdout, "instr %d, time %lld, pc %04x:%08x, fetch_ptr=%p\n", n, bx_pc_system.time_ticks (), cs, rip, fetch_ptr); } n++; } #endif #if BX_EXTERNAL_DEBUGGER if (regs.debug_state != debug_run) { bx_external_debugger(this); } #endif { bx_address eipBiased; Bit8u *fetchPtr; eipBiased = RIP + BX_CPU_THIS_PTR eipPageBias; if ( eipBiased >= BX_CPU_THIS_PTR eipPageWindowSize ) { prefetch(); eipBiased = RIP + BX_CPU_THIS_PTR eipPageBias; } #if BX_SupportICache unsigned iCacheHash; Bit32u pAddr, pageWriteStamp, fetchModeMask; pAddr = BX_CPU_THIS_PTR pAddrA20Page + eipBiased; iCacheHash = BX_CPU_THIS_PTR iCache.hash( pAddr ); i = & BX_CPU_THIS_PTR iCache.entry[iCacheHash].i; pageWriteStamp = BX_CPU_THIS_PTR iCache.pageWriteStampTable[pAddr>>12]; fetchModeMask = BX_CPU_THIS_PTR iCache.fetchModeMask; if ( (BX_CPU_THIS_PTR iCache.entry[iCacheHash].pAddr == pAddr) && (BX_CPU_THIS_PTR iCache.entry[iCacheHash].writeStamp == pageWriteStamp) && ((pageWriteStamp & fetchModeMask) == fetchModeMask) ) { // iCache hit. Instruction is already decoded and stored in // the instruction cache. DeclareResolveModRM(); resolveModRM = i->ResolveModrm; // Get as soon as possible for speculation. execute = i->execute; // fetch as soon as possible for speculation. if (resolveModRM) { BX_CPU_CALL_METHOD(resolveModRM, (i)); } } else #endif { // iCache miss. No validated instruction with matching fetch parameters // is in the iCache. Or we're not compiling iCache support in, in which // case we always have an iCache miss. :^) bx_address remainingInPage; unsigned maxFetch; remainingInPage = (BX_CPU_THIS_PTR eipPageWindowSize - eipBiased); maxFetch = 15; if (remainingInPage < 15) maxFetch = remainingInPage; fetchPtr = BX_CPU_THIS_PTR eipFetchPtr + eipBiased; #if BX_SupportICache // In the case where the page is marked ICacheWriteStampInvalid, all // counter bits will be high, being eqivalent to ICacheWriteStampMax. // In the case where the page is marked as possibly having associated // iCache entries, we need to leave the counter as-is, unless we're // willing to dump all iCache entries which can hash to this page. // Therefore, in either case, we can keep the counter as-is and // replace the fetch mode bits. pageWriteStamp &= 0x1fffffff; // Clear out old fetch mode bits. pageWriteStamp |= fetchModeMask; // Add in new ones. BX_CPU_THIS_PTR iCache.pageWriteStampTable[pAddr>>12] = pageWriteStamp; BX_CPU_THIS_PTR iCache.entry[iCacheHash].pAddr = pAddr; BX_CPU_THIS_PTR iCache.entry[iCacheHash].writeStamp = pageWriteStamp; #endif #if BX_SUPPORT_X86_64 if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64) { ret = fetchDecode64(fetchPtr, i, maxFetch); } else #endif { ret = fetchDecode(fetchPtr, i, maxFetch); } DeclareResolveModRM(); resolveModRM = i->ResolveModrm; // Get function pointers as early if (ret==0) { #if BX_SupportICache // Invalidate entry, since fetch-decode failed with partial updates // to the i-> structure. BX_CPU_THIS_PTR iCache.entry[iCacheHash].writeStamp = ICacheWriteStampInvalid; i = &iStorage; #endif boundaryFetch(i); resolveModRM = i->ResolveModrm; // Get function pointers as early } execute = i->execute; // fetch as soon as possible for speculation. if (resolveModRM) { BX_CPU_CALL_METHOD(resolveModRM, (i)); } } } #if BX_DEBUGGER if (BX_CPU_THIS_PTR trace) { // print the instruction that is about to be executed. #if (BX_SMP_PROCESSORS==1) bx_dbg_disassemble_current (0, 1); // only one cpu, print time stamp #else bx_dbg_disassemble_current (local_apic.get_id (), 1); // this cpu only #endif } #endif if ( !(i->repUsedL() && i->repeatableL()) ) { // non repeating instruction RIP += i->ilen(); BX_CPU_CALL_METHOD(execute, (i)); BX_CPU_THIS_PTR prev_eip = RIP; // commit new EIP BX_CPU_THIS_PTR prev_esp = RSP; // commit new ESP #ifdef REGISTER_IADDR REGISTER_IADDR(RIP + BX_CPU_THIS_PTR sregs[BX_SREG_CS].cache.u.segment.base); #endif BX_TICK1_IF_SINGLE_PROCESSOR(); } else { repeat_loop: if (i->repeatableZFL()) { #if BX_SUPPORT_X86_64 if (i->as64L()) { if (RCX != 0) { BX_CPU_CALL_METHOD(execute, (i)); RCX -= 1; } if ((i->repUsedValue()==3) && (get_ZF()==0)) goto repeat_done; if ((i->repUsedValue()==2) && (get_ZF()!=0)) goto repeat_done; if (RCX == 0) goto repeat_done; goto repeat_not_done; } else #endif if (i->as32L()) { if (ECX != 0) { BX_CPU_CALL_METHOD(execute, (i)); ECX -= 1; } if ((i->repUsedValue()==3) && (get_ZF()==0)) goto repeat_done; if ((i->repUsedValue()==2) && (get_ZF()!=0)) goto repeat_done; if (ECX == 0) goto repeat_done; goto repeat_not_done; } else { if (CX != 0) { BX_CPU_CALL_METHOD(execute, (i)); CX -= 1; } if ((i->repUsedValue()==3) && (get_ZF()==0)) goto repeat_done; if ((i->repUsedValue()==2) && (get_ZF()!=0)) goto repeat_done; if (CX == 0) goto repeat_done; goto repeat_not_done; } } else { // normal repeat, no concern for ZF #if BX_SUPPORT_X86_64 if (i->as64L()) { if (RCX != 0) { BX_CPU_CALL_METHOD(execute, (i)); RCX -= 1; } if (RCX == 0) goto repeat_done; goto repeat_not_done; } else #endif if (i->as32L()) { if (ECX != 0) { BX_CPU_CALL_METHOD(execute, (i)); ECX -= 1; } if (ECX == 0) goto repeat_done; goto repeat_not_done; } else { // 16bit addrsize if (CX != 0) { BX_CPU_CALL_METHOD(execute, (i)); CX -= 1; } if (CX == 0) goto repeat_done; goto repeat_not_done; } } // shouldn't get here from above repeat_not_done: #ifdef REGISTER_IADDR REGISTER_IADDR(RIP + BX_CPU_THIS_PTR sregs[BX_SREG_CS].cache.u.segment.base); #endif BX_TICK1_IF_SINGLE_PROCESSOR(); #if BX_DEBUGGER == 0 if (BX_CPU_THIS_PTR async_event) { invalidate_prefetch_q(); goto debugger_check; } goto repeat_loop; #else /* if BX_DEBUGGER == 1 */ invalidate_prefetch_q(); goto debugger_check; #endif repeat_done: RIP += i->ilen(); BX_CPU_THIS_PTR prev_eip = RIP; // commit new EIP BX_CPU_THIS_PTR prev_esp = RSP; // commit new ESP #ifdef REGISTER_IADDR REGISTER_IADDR(RIP + BX_CPU_THIS_PTR sregs[BX_SREG_CS].cache.u.segment.base); #endif BX_TICK1_IF_SINGLE_PROCESSOR(); } debugger_check: #if (BX_SMP_PROCESSORS>1 && BX_DEBUGGER==0) // The CHECK_MAX_INSTRUCTIONS macro allows cpu_loop to execute a few // instructions and then return so that the other processors have a chance // to run. This is used only when simulating multiple processors. If only // one processor, don't waste any cycles on it! Also, it is not needed // with the debugger because its guard mechanism provides the same // functionality. CHECK_MAX_INSTRUCTIONS(max_instr_count); #endif #if BX_DEBUGGER // BW vm mode switch support is in dbg_is_begin_instr_bpoint // note instr generating exceptions never reach this point. // (mch) Read/write, time break point support if (BX_CPU_THIS_PTR break_point) { switch (BX_CPU_THIS_PTR break_point) { case BREAK_POINT_TIME: BX_INFO(("[%lld] Caught time breakpoint", bx_pc_system.time_ticks())); BX_CPU_THIS_PTR stop_reason = STOP_TIME_BREAK_POINT; return; case BREAK_POINT_READ: BX_INFO(("[%lld] Caught read watch point", bx_pc_system.time_ticks())); BX_CPU_THIS_PTR stop_reason = STOP_READ_WATCH_POINT; return; case BREAK_POINT_WRITE: BX_INFO(("[%lld] Caught write watch point", bx_pc_system.time_ticks())); BX_CPU_THIS_PTR stop_reason = STOP_WRITE_WATCH_POINT; return; default: BX_PANIC(("Weird break point condition")); } } #ifdef MAGIC_BREAKPOINT // (mch) Magic break point support if (BX_CPU_THIS_PTR magic_break) { if (bx_dbg.magic_break_enabled) { BX_DEBUG(("Stopped on MAGIC BREAKPOINT")); BX_CPU_THIS_PTR stop_reason = STOP_MAGIC_BREAK_POINT; return; } else { BX_CPU_THIS_PTR magic_break = 0; BX_CPU_THIS_PTR stop_reason = STOP_NO_REASON; BX_DEBUG(("Ignoring MAGIC BREAKPOINT")); } } #endif { // check for icount or control-C. If found, set guard reg and return. Bit32u debug_eip = BX_CPU_THIS_PTR prev_eip; if ( dbg_is_end_instr_bpoint( BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, debug_eip, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base + debug_eip, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b) ) { return; } } #endif // #if BX_DEBUGGER goto main_cpu_loop; // // This area is where we process special conditions and events. // handle_async_event: if (BX_CPU_THIS_PTR debug_trap & 0x80000000) { // I made up the bitmask above to mean HALT state. #if BX_SMP_PROCESSORS==1 BX_CPU_THIS_PTR debug_trap = 0; // clear traps for after resume BX_CPU_THIS_PTR inhibit_mask = 0; // clear inhibits for after resume // for one processor, pass the time as quickly as possible until // an interrupt wakes up the CPU. #if BX_DEBUGGER while (bx_guard.interrupt_requested != 1) #else while (1) #endif { if (BX_CPU_THIS_PTR INTR && BX_CPU_THIS_PTR get_IF ()) { break; } if (BX_CPU_THIS_PTR async_event == 0) { BX_INFO(("decode: reset detected in halt state")); break; } BX_TICK1(); } #else /* BX_SMP_PROCESSORS != 1 */ // for multiprocessor simulation, even if this CPU is halted we still // must give the others a chance to simulate. If an interrupt has // arrived, then clear the HALT condition; otherwise just return from // the CPU loop with stop_reason STOP_CPU_HALTED. if (BX_CPU_THIS_PTR INTR && BX_CPU_THIS_PTR get_IF ()) { // interrupt ends the HALT condition BX_CPU_THIS_PTR debug_trap = 0; // clear traps for after resume BX_CPU_THIS_PTR inhibit_mask = 0; // clear inhibits for after resume //bx_printf ("halt condition has been cleared in %s", name); } else { // HALT condition remains, return so other CPUs have a chance #if BX_DEBUGGER BX_CPU_THIS_PTR stop_reason = STOP_CPU_HALTED; #endif return; } #endif } else if (BX_CPU_THIS_PTR kill_bochs_request) { // setting kill_bochs_request causes the cpu loop to return ASAP. return; } // Priority 1: Hardware Reset and Machine Checks // RESET // Machine Check // (bochs doesn't support these) // Priority 2: Trap on Task Switch // T flag in TSS is set if (BX_CPU_THIS_PTR debug_trap & 0x00008000) { BX_CPU_THIS_PTR dr6 |= BX_CPU_THIS_PTR debug_trap; exception(BX_DB_EXCEPTION, 0, 0); // no error, not interrupt } // Priority 3: External Hardware Interventions // FLUSH // STOPCLK // SMI // INIT // (bochs doesn't support these) // Priority 4: Traps on Previous Instruction // Breakpoints // Debug Trap Exceptions (TF flag set or data/IO breakpoint) if ( BX_CPU_THIS_PTR debug_trap && !(BX_CPU_THIS_PTR inhibit_mask & BX_INHIBIT_DEBUG) ) { // A trap may be inhibited on this boundary due to an instruction // which loaded SS. If so we clear the inhibit_mask below // and don't execute this code until the next boundary. // Commit debug events to DR6 BX_CPU_THIS_PTR dr6 |= BX_CPU_THIS_PTR debug_trap; exception(BX_DB_EXCEPTION, 0, 0); // no error, not interrupt } // Priority 5: External Interrupts // NMI Interrupts // Maskable Hardware Interrupts if (BX_CPU_THIS_PTR inhibit_mask & BX_INHIBIT_INTERRUPTS) { // Processing external interrupts is inhibited on this // boundary because of certain instructions like STI. // inhibit_mask is cleared below, in which case we will have // an opportunity to check interrupts on the next instruction // boundary. } else if (BX_CPU_THIS_PTR INTR && BX_CPU_THIS_PTR get_IF () && BX_DBG_ASYNC_INTR) { Bit8u vector; // NOTE: similar code in ::take_irq() #if BX_SUPPORT_APIC if (BX_CPU_THIS_PTR int_from_local_apic) vector = BX_CPU_THIS_PTR local_apic.acknowledge_int (); else vector = BX_IAC(); // may set INTR with next interrupt #else // if no local APIC, always acknowledge the PIC. vector = BX_IAC(); // may set INTR with next interrupt #endif //BX_DEBUG(("decode: interrupt %u", // (unsigned) vector)); BX_CPU_THIS_PTR errorno = 0; BX_CPU_THIS_PTR EXT = 1; /* external event */ interrupt(vector, 0, 0, 0); BX_INSTR_HWINTERRUPT(vector, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, EIP); // Set up environment, as would be when this main cpu loop gets // invoked. At the end of normal instructions, we always commmit // the new EIP/ESP values. But here, we call interrupt() much like // it was a sofware interrupt instruction, and need to effect the // commit here. This code mirrors similar code above. BX_CPU_THIS_PTR prev_eip = RIP; // commit new RIP BX_CPU_THIS_PTR prev_esp = RSP; // commit new RSP BX_CPU_THIS_PTR EXT = 0; BX_CPU_THIS_PTR errorno = 0; } else if (BX_HRQ && BX_DBG_ASYNC_DMA) { // NOTE: similar code in ::take_dma() // assert Hold Acknowledge (HLDA) and go into a bus hold state BX_RAISE_HLDA(); } // Priority 6: Faults from fetching next instruction // Code breakpoint fault // Code segment limit violation (priority 7 on 486/Pentium) // Code page fault (priority 7 on 486/Pentium) // (handled in main decode loop) // Priority 7: Faults from decoding next instruction // Instruction length > 15 bytes // Illegal opcode // Coprocessor not available // (handled in main decode loop etc) // Priority 8: Faults on executing an instruction // Floating point execution // Overflow // Bound error // Invalid TSS // Segment not present // Stack fault // General protection // Data page fault // Alignment check // (handled by rest of the code) if (BX_CPU_THIS_PTR get_TF ()) { // TF is set before execution of next instruction. Schedule // a debug trap (#DB) after execution. After completion of // next instruction, the code above will invoke the trap. BX_CPU_THIS_PTR debug_trap |= 0x00004000; // BS flag in DR6 } // Now we can handle things which are synchronous to instruction // execution. if (BX_CPU_THIS_PTR get_RF ()) { BX_CPU_THIS_PTR clear_RF (); } #if BX_X86_DEBUGGER else { // only bother comparing if any breakpoints enabled if ( BX_CPU_THIS_PTR dr7 & 0x000000ff ) { Bit32u iaddr = BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base + BX_CPU_THIS_PTR prev_eip; Bit32u dr6_bits; if ( (dr6_bits = hwdebug_compare(iaddr, 1, BX_HWDebugInstruction, BX_HWDebugInstruction)) ) { // Add to the list of debug events thus far. BX_CPU_THIS_PTR debug_trap |= dr6_bits; BX_CPU_THIS_PTR async_event = 1; // If debug events are not inhibited on this boundary, // fire off a debug fault. Otherwise handle it on the next // boundary. (becomes a trap) if ( !(BX_CPU_THIS_PTR inhibit_mask & BX_INHIBIT_DEBUG) ) { // Commit debug events to DR6 BX_CPU_THIS_PTR dr6 = BX_CPU_THIS_PTR debug_trap; exception(BX_DB_EXCEPTION, 0, 0); // no error, not interrupt } } } } #endif // We have ignored processing of external interrupts and // debug events on this boundary. Reset the mask so they // will be processed on the next boundary. BX_CPU_THIS_PTR inhibit_mask = 0; if ( !(BX_CPU_THIS_PTR INTR || BX_CPU_THIS_PTR debug_trap || BX_HRQ || BX_CPU_THIS_PTR get_TF ()) ) BX_CPU_THIS_PTR async_event = 0; goto async_events_processed; } #endif // #if BX_DYNAMIC_TRANSLATION == 0 // boundaries of consideration: // // * physical memory boundary: 1024k (1Megabyte) (increments of...) // * A20 boundary: 1024k (1Megabyte) // * page boundary: 4k // * ROM boundary: 2k (dont care since we are only reading) // * segment boundary: any void BX_CPU_C::prefetch(void) { // cs:eIP // prefetch QSIZE byte quantity aligned on corresponding boundary bx_address laddr; Bit32u pAddr; bx_address temp_rip; Bit32u temp_limit; bx_address laddrPageOffset0, eipPageOffset0; temp_rip = RIP; temp_limit = BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled; laddr = BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.base + temp_rip; if (((Bit32u)temp_rip) > temp_limit) { BX_PANIC(("prefetch: RIP > CS.limit")); } #if BX_SUPPORT_PAGING if (BX_CPU_THIS_PTR cr0.pg) { // aligned block guaranteed to be all in one page, same A20 address pAddr = itranslate_linear(laddr, CPL==3); pAddr = A20ADDR(pAddr); } else #endif // BX_SUPPORT_PAGING { pAddr = A20ADDR(laddr); } // check if segment boundary comes into play //if ((temp_limit - (Bit32u)temp_rip) < 4096) { // } // Linear address at the beginning of the page. laddrPageOffset0 = laddr & 0xfffff000; // Calculate RIP at the beginning of the page. eipPageOffset0 = RIP - (laddr - laddrPageOffset0); BX_CPU_THIS_PTR eipPageBias = - eipPageOffset0; BX_CPU_THIS_PTR eipPageWindowSize = 4096; // FIXME: BX_CPU_THIS_PTR pAddrA20Page = pAddr & 0xfffff000; BX_CPU_THIS_PTR eipFetchPtr = BX_CPU_THIS_PTR mem->getHostMemAddr(this, BX_CPU_THIS_PTR pAddrA20Page, BX_READ); // Sanity checks if ( !BX_CPU_THIS_PTR eipFetchPtr ) { if ( pAddr >= BX_CPU_THIS_PTR mem->len ) { BX_PANIC(("prefetch: running in bogus memory")); } else { BX_PANIC(("prefetch: getHostMemAddr vetoed direct read, pAddr=0x%x.", pAddr)); } } } void BX_CPU_C::boundaryFetch(bxInstruction_c *i) { unsigned j; Bit8u fetchBuffer[16]; // Really only need 15 bx_address eipBiased, remainingInPage; Bit8u *fetchPtr; unsigned ret; eipBiased = RIP + BX_CPU_THIS_PTR eipPageBias; remainingInPage = (BX_CPU_THIS_PTR eipPageWindowSize - eipBiased); if (remainingInPage > 15) { BX_PANIC(("fetch_decode: remaining > max ilen")); } fetchPtr = BX_CPU_THIS_PTR eipFetchPtr + eipBiased; // Read all leftover bytes in current page up to boundary. for (j=0; jlogfunctions::ask(level,prefix,fmt,ap); #endif } #if BX_EXTERNAL_DEBUGGER void BX_CPU_C::trap_debugger (Boolean callnow) { regs.debug_state = debug_step; if (callnow) { bx_external_debugger(this); } } #endif #endif // #if BX_SUPPORT_X86_64 #if BX_DEBUGGER extern unsigned int dbg_show_mask; Boolean BX_CPU_C::dbg_is_begin_instr_bpoint(Bit32u cs, Bit32u eip, Bit32u laddr, Bit32u is_32) { //fprintf (stderr, "begin_instr_bp: checking cs:eip %04x:%08x\n", cs, eip); BX_CPU_THIS_PTR guard_found.cs = cs; BX_CPU_THIS_PTR guard_found.eip = eip; BX_CPU_THIS_PTR guard_found.laddr = laddr; BX_CPU_THIS_PTR guard_found.is_32bit_code = is_32; // BW mode switch breakpoint // instruction which generate exceptions never reach the end of the // loop due to a long jump. Thats why we check at start of instr. // Downside is that we show the instruction about to be executed // (not the one generating the mode switch). if (BX_CPU_THIS_PTR mode_break && (BX_CPU_THIS_PTR debug_vm != BX_CPU_THIS_PTR getB_VM ())) { BX_INFO(("Caught vm mode switch breakpoint")); BX_CPU_THIS_PTR debug_vm = BX_CPU_THIS_PTR getB_VM (); BX_CPU_THIS_PTR stop_reason = STOP_MODE_BREAK_POINT; return 1; } if( (BX_CPU_THIS_PTR show_flag) & (dbg_show_mask)) { int rv; if((rv = bx_dbg_symbolic_output())) return rv; } // see if debugger is looking for iaddr breakpoint of any type if (bx_guard.guard_for & BX_DBG_GUARD_IADDR_ALL) { #if BX_DBG_SUPPORT_VIR_BPOINT if (bx_guard.guard_for & BX_DBG_GUARD_IADDR_VIR) { if (BX_CPU_THIS_PTR guard_found.icount!=0) { for (unsigned i=0; i= bx_guard.icount) { BX_CPU_THIS_PTR guard_found.cs = cs; BX_CPU_THIS_PTR guard_found.eip = eip; BX_CPU_THIS_PTR guard_found.laddr = laddr; BX_CPU_THIS_PTR guard_found.is_32bit_code = is_32; BX_CPU_THIS_PTR guard_found.guard_found = BX_DBG_GUARD_ICOUNT; return(1); } } #if (BX_NUM_SIMULATORS >= 2) // if async event pending, acknowlege them if (bx_guard.async_changes_pending.which) { if (bx_guard.async_changes_pending.which & BX_DBG_ASYNC_PENDING_A20) bx_dbg_async_pin_ack(BX_DBG_ASYNC_PENDING_A20, bx_guard.async_changes_pending.a20); if (bx_guard.async_changes_pending.which) { BX_PANIC(("decode: async pending unrecognized.")); } } #endif return(0); // no breakpoint } void BX_CPU_C::dbg_take_irq(void) { unsigned vector; // NOTE: similar code in ::cpu_loop() if ( BX_CPU_THIS_PTR INTR && BX_CPU_THIS_PTR get_IF () ) { if ( setjmp(BX_CPU_THIS_PTR jmp_buf_env) == 0 ) { // normal return from setjmp setup vector = BX_IAC(); // may set INTR with next interrupt BX_CPU_THIS_PTR errorno = 0; BX_CPU_THIS_PTR EXT = 1; // external event BX_CPU_THIS_PTR async_event = 1; // set in case INTR is triggered interrupt(vector, 0, 0, 0); } } } void BX_CPU_C::dbg_force_interrupt(unsigned vector) { // Used to force slave simulator to take an interrupt, without // regard to IF if ( setjmp(BX_CPU_THIS_PTR jmp_buf_env) == 0 ) { // normal return from setjmp setup BX_CPU_THIS_PTR errorno = 0; BX_CPU_THIS_PTR EXT = 1; // external event BX_CPU_THIS_PTR async_event = 1; // probably don't need this interrupt(vector, 0, 0, 0); } } void BX_CPU_C::dbg_take_dma(void) { // NOTE: similar code in ::cpu_loop() if ( BX_HRQ ) { BX_CPU_THIS_PTR async_event = 1; // set in case INTR is triggered BX_RAISE_HLDA(); } } #endif // #if BX_DEBUGGER