///////////////////////////////////////////////////////////////////////// // $Id: eth_fbsd.cc,v 1.19 2001-11-06 17:14:34 fries Exp $ ///////////////////////////////////////////////////////////////////////// // // Copyright (C) 2001 MandrakeSoft S.A. // // MandrakeSoft S.A. // 43, rue d'Aboukir // 75002 Paris - France // http://www.linux-mandrake.com/ // http://www.mandrakesoft.com/ // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public // License as published by the Free Software Foundation; either // version 2 of the License, or (at your option) any later version. // // This library is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // Lesser General Public License for more details. // // You should have received a copy of the GNU Lesser General Public // License along with this library; if not, write to the Free Software // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // Peter Grehan (grehan@iprg.nokia.com) coded all of this // NE2000/ether stuff. // eth_fbsd.cc - A FreeBSD packet filter implementation of // an ethernet pktmover. There are some problems and limitations // with FreeBSD: // - the source address of the frame is overwritten by // the hosts's source address. This causes problems with // learning bridges - since they cannot determine where // BOCHS 'is', they broadcast the frame to all ports. // - packets cannot be sent from BOCHS to the host // - TCP performance seems to be abysmal; I think this is // a timing problem somewhere. // - I haven't handled the case where multiple frames arrive // in a single BPF read. // // The /dev/bpf* devices need to be set up with the appropriate // permissions for this to work. // // The config line in .bochsrc should look something like: // // ne2k: ioaddr=0x280, irq=9, mac=00:a:b:c:1:2, ethmod=fbsd, ethdev=fxp0 // #include "bochs.h" #ifdef ETH_FBSD #define LOG_THIS this-> extern "C" { #include #include #include #include #include #include }; #define BX_BPF_POLL 1000 // Poll for a frame every 250 usecs #define BX_BPF_BUFSIZ 2048 // enough for an ether frame + bpf hdr #define BX_BPF_INSNSIZ 8 // number of bpf insns // template filter for a unicast mac address and all // multicast/broadcast frames static const struct bpf_insn macfilter[] = { BPF_STMT(BPF_LD|BPF_W|BPF_ABS, 2), // A <- P[2:4] BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, 0xaaaaaaaa, 0, 2), // if A != 0xaaaaaaa GOTO LABEL-1 BPF_STMT(BPF_LD|BPF_H|BPF_ABS, 0), // A <- P[0:2] BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, 0x0000aaaa, 2, 0), // if A == 0xaaaa GOTO ACCEPT // LABEL-1 BPF_STMT(BPF_LD|BPF_B|BPF_ABS, 0), // A <- P[0:1] BPF_JUMP(BPF_JMP|BPF_JSET|BPF_K, 0x01, 0, 1), // if !(A & 1) GOTO LABEL-REJECT // LABEL-ACCEPT BPF_STMT(BPF_RET, 1514), // Accept packet // LABEL-REJECT BPF_STMT(BPF_RET, 0), // Reject packet }; // template filter for all frames static const struct bpf_insn promiscfilter[] = { BPF_STMT(BPF_RET, 1514) }; // // Define the class. This is private to this module // class bx_fbsd_pktmover_c : public eth_pktmover_c { public: bx_fbsd_pktmover_c(const char *netif, const char *macaddr, eth_rx_handler_t rxh, void *rxarg); void sendpkt(void *buf, unsigned io_len); private: char *fbsd_macaddr[6]; int bpf_fd; static void rx_timer_handler(void *); void rx_timer(void); int rx_timer_index; struct bpf_insn filter[BX_BPF_INSNSIZ]; FILE *ne2klog, *ne2klog_txt; }; // // Define the static class that registers the derived pktmover class, // and allocates one on request. // class bx_fbsd_locator_c : public eth_locator_c { public: bx_fbsd_locator_c(void) : eth_locator_c("fbsd") {} protected: eth_pktmover_c *allocate(const char *netif, const char *macaddr, eth_rx_handler_t rxh, void *rxarg) { return (new bx_fbsd_pktmover_c(netif, macaddr, rxh, rxarg)); } } bx_fbsd_match; // // Define the methods for the bx_fbsd_pktmover derived class // // the constructor // // Open a bpf file descriptor, and attempt to bind to // the specified netif (Replicates libpcap open code) // bx_fbsd_pktmover_c::bx_fbsd_pktmover_c(const char *netif, const char *macaddr, eth_rx_handler_t rxh, void *rxarg) { char device[sizeof "/dev/bpf000"]; int tmpfd; int n = 0; struct ifreq ifr; struct bpf_version bv; struct bpf_program bp; u_int v; put("BPF"); memcpy(fbsd_macaddr, macaddr, 6); do { (void)sprintf(device, "/dev/bpf%d", n++); this->bpf_fd = open(device, O_RDWR); BX_DEBUG(("tried %s, returned %d (%s)",device,this->bpf_fd,strerror(errno))); if(errno == EACCES) break; } while (this->bpf_fd == -1); if (this->bpf_fd == -1) { BX_PANIC(("eth_freebsd: could not open packet filter: %s", strerror(errno))); return; } if (ioctl(this->bpf_fd, BIOCVERSION, (caddr_t)&bv) < 0) { BX_PANIC(("eth_freebsd: could not retrieve bpf version")); close(this->bpf_fd); this->bpf_fd = -1; return; } if (bv.bv_major != BPF_MAJOR_VERSION || bv.bv_minor < BPF_MINOR_VERSION) { BX_PANIC(("eth_freebsd: bpf version mismatch between compilation and runtime")); close(this->bpf_fd); this->bpf_fd = -1; return; } // Set buffer size v = BX_BPF_BUFSIZ; if (ioctl(this->bpf_fd, BIOCSBLEN, (caddr_t)&v) < 0) { BX_PANIC(("eth_freebsd: could not set buffer size: %s", strerror(errno))); close(this->bpf_fd); this->bpf_fd = -1; return; } (void)strncpy(ifr.ifr_name, netif, sizeof(ifr.ifr_name)); if (ioctl(this->bpf_fd, BIOCSETIF, (caddr_t)&ifr) < 0) { BX_PANIC(("eth_freebsd: could not enable interface '%s': %s", netif, strerror(errno))); close(this->bpf_fd); this->bpf_fd == -1; } // Verify that the device is an ethernet. if (ioctl(this->bpf_fd, BIOCGDLT, (caddr_t)&v) < 0) { BX_PANIC(("eth_freebsd: could not retrieve datalink type: %s", strerror(errno))); close(this->bpf_fd); this->bpf_fd = -1; return; } if (v != DLT_EN10MB) { BX_PANIC(("eth_freebsd: incorrect datalink type %d, expected 10mb ethernet", v)); close(this->bpf_fd); this->bpf_fd = -1; return; } // Put the device into promisc mode. This could be optimised // to filter on a MAC address, broadcast, and all-multi, // but this will do for now. // if (ioctl(this->bpf_fd, BIOCPROMISC, NULL) < 0) { BX_PANIC(("eth_freebsd: could not enable promisc mode: %s", strerror(errno))); close(this->bpf_fd); this->bpf_fd = -1; return; } // Set up non-blocking i/o v = 1; if (ioctl(this->bpf_fd, FIONBIO, &v) < 0) { BX_PANIC(("eth_freebsd: could not enable non-blocking i/o: %s", strerror(errno))); close(this->bpf_fd); this->bpf_fd = -1; return; } // Install a filter #ifdef notdef memcpy(&this->filter, promiscfilter, sizeof(promiscfilter)); bp.bf_len = 1; #else memcpy(&this->filter, macfilter, sizeof(macfilter)); this->filter[1].k = (macaddr[2] & 0xff) << 24 | (macaddr[3] & 0xff) << 16 | (macaddr[4] & 0xff) << 8 | (macaddr[5] & 0xff); this->filter[3].k = (macaddr[0] & 0xff) << 8 | (macaddr[1] & 0xff); bp.bf_len = 8; #endif bp.bf_insns = &this->filter[0]; if (ioctl(this->bpf_fd, BIOCSETF, &bp) < 0) { BX_PANIC(("eth_freebsd: could not set filter: %s", strerror(errno))); close(this->bpf_fd); this->bpf_fd = -1; return; } // Start the rx poll this->rx_timer_index = bx_pc_system.register_timer(this, this->rx_timer_handler, BX_BPF_POLL, 1, 1); // continuous, active this->rxh = rxh; this->rxarg = rxarg; #if BX_ETH_FBSD_LOGGING // eventually Bryce wants ne2klog to dump in pcap format so that // tcpdump -r FILE can read it and interpret packets. ne2klog = fopen ("ne2k.raw", "wb"); if (!ne2klog) BX_PANIC (("open ne2k-tx.log failed")); ne2klog_txt = fopen ("ne2k.txt", "wb"); if (!ne2klog_txt) BX_PANIC (("open ne2k-txdump.txt failed")); fprintf (ne2klog_txt, "null packetmover readable log file\n"); fprintf (ne2klog_txt, "net IF = %s\n", netif); fprintf (ne2klog_txt, "MAC address = "); for (int i=0; i<6; i++) fprintf (ne2klog_txt, "%02x%s", 0xff & macaddr[i], i<5?":" : ""); fprintf (ne2klog_txt, "\n--\n"); fflush (ne2klog_txt); #endif } // the output routine - called with pre-formatted ethernet frame. void bx_fbsd_pktmover_c::sendpkt(void *buf, unsigned io_len) { #if BX_ETH_FBSD_LOGGING BX_DEBUG (("sendpkt length %u", io_len)); // dump raw bytes to a file, eventually dump in pcap format so that // tcpdump -r FILE can interpret them for us. int n = fwrite (buf, io_len, 1, ne2klog); if (n != 1) BX_ERROR (("fwrite to ne2klog failed", io_len)); // dump packet in hex into an ascii log file fprintf (ne2klog_txt, "NE2K TX packet, length %u\n", io_len); Bit8u *charbuf = (Bit8u *)buf; for (n=0; n0) fprintf (ne2klog_txt, "\n"); fprintf (ne2klog_txt, "%02x ", charbuf[n]); } fprintf (ne2klog_txt, "\n--\n"); // flush log so that we see the packets as they arrive w/o buffering fflush (ne2klog); fflush (ne2klog_txt); #endif int status; if (this->bpf_fd != -1) status = write(this->bpf_fd, buf, io_len); } // The receive poll process void bx_fbsd_pktmover_c::rx_timer_handler(void *this_ptr) { bx_fbsd_pktmover_c *class_ptr = (bx_fbsd_pktmover_c *) this_ptr; class_ptr->rx_timer(); } void bx_fbsd_pktmover_c::rx_timer(void) { int nbytes = 0; unsigned char rxbuf[BX_BPF_BUFSIZ]; struct bpf_hdr *bhdr; struct bpf_stat bstat; static struct bpf_stat previous_bstat; int counter = 10; #define phdr ((unsigned char*)bhdr) bhdr = (struct bpf_hdr *) rxbuf; nbytes = read(this->bpf_fd, rxbuf, sizeof(rxbuf)); while (phdr < (rxbuf + nbytes)) { if (ioctl(this->bpf_fd, BIOCGSTATS, &bstat) < 0) { BX_PANIC(("eth_freebsd: could not stat filter: %s", strerror(errno))); } if (bstat.bs_drop > previous_bstat.bs_drop) { BX_INFO (("eth_freebsd: %d packets dropped by the kernel.", bstat.bs_drop - previous_bstat.bs_drop)); } previous_bstat = bstat; if (bhdr->bh_caplen < 20 || bhdr->bh_caplen > 1514) { BX_ERROR(("eth_freebsd: received too weird packet length: %d", bhdr->bh_caplen)); } // filter out packets sourced from this node if (memcmp(bhdr + bhdr->bh_hdrlen + 6, this->fbsd_macaddr, 6)) { (*rxh)(rxarg, phdr + bhdr->bh_hdrlen, bhdr->bh_caplen); } #if BX_ETH_FBSD_LOGGING /// hey wait there is no receive data with a NULL ethernet, is there.... BX_DEBUG (("receive packet length %u", nbytes)); // dump raw bytes to a file, eventually dump in pcap format so that // tcpdump -r FILE can interpret them for us. if (1 != fwrite (bhdr, bhdr->bh_caplen, 1, ne2klog)) { BX_PANIC (("fwrite to ne2klog failed: %s", strerror(errno))); } // dump packet in hex into an ascii log file fprintf (this->ne2klog_txt, "NE2K RX packet, length %u\n", bhdr->bh_caplen); Bit8u *charrxbuf = (Bit8u *)rxbuf; int n; for (n=0; nbh_caplen; n++) { if (((n % 16) == 0) && n>0) fprintf (this->ne2klog_txt, "\n"); fprintf (this->ne2klog_txt, "%02x ", phdr[n]); } fprintf (this->ne2klog_txt, "\n--\n"); // flush log so that we see the packets as they arrive w/o buffering fflush (this->ne2klog); fflush (this->ne2klog_txt); #endif // Advance bhdr and phdr pointers to next packet bhdr = (struct bpf_hdr*) ((char*) bhdr + BPF_WORDALIGN(bhdr->bh_hdrlen + bhdr->bh_caplen)); } } #endif