///////////////////////////////////////////////////////////////////////// // $Id: cpu.cc,v 1.130 2006-02-14 19:00:08 sshwarts Exp $ ///////////////////////////////////////////////////////////////////////// // // Copyright (C) 2001 MandrakeSoft S.A. // // MandrakeSoft S.A. // 43, rue d'Aboukir // 75002 Paris - France // http://www.linux-mandrake.com/ // http://www.mandrakesoft.com/ // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public // License as published by the Free Software Foundation; either // version 2 of the License, or (at your option) any later version. // // This library is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // Lesser General Public License for more details. // // You should have received a copy of the GNU Lesser General Public // License along with this library; if not, write to the Free Software // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #define NEED_CPU_REG_SHORTCUTS 1 #include "bochs.h" #include "iodev/iodev.h" #define LOG_THIS BX_CPU_THIS_PTR #if BX_PROVIDE_CPU_MEMORY==1 #if BX_ADDRESS_SPACES==1 BOCHSAPI BX_MEM_C bx_mem; #else BOCHSAPI BX_MEM_C bx_mem_array[BX_ADDRESS_SPACES]; #endif #endif #if BX_SUPPORT_ICACHE bxPageWriteStampTable pageWriteStampTable; void purgeICaches(void) { #if BX_SUPPORT_SMP for (unsigned i=0; iiCache.purgeICacheEntries(); #else BX_CPU(0)->iCache.purgeICacheEntries(); #endif pageWriteStampTable.resetWriteStamps(); } void flushICaches(void) { #if BX_SUPPORT_SMP for (unsigned i=0; iiCache.flushICacheEntries(); #else BX_CPU(0)->iCache.flushICacheEntries(); #endif pageWriteStampTable.resetWriteStamps(); } #define InstrumentICACHE 0 #if InstrumentICACHE static unsigned iCacheLookups=0; static unsigned iCacheMisses=0; #define InstrICache_StatsMask 0xffffff #define InstrICache_Stats() {\ if ((iCacheLookups & InstrICache_StatsMask) == 0) { \ BX_INFO(("ICACHE lookups: %u, misses: %u, hit rate = %6.2f%% ", \ iCacheLookups, \ iCacheMisses, \ (iCacheLookups-iCacheMisses) * 100.0 / iCacheLookups)); \ iCacheLookups = iCacheMisses = 0; \ } \ } #define InstrICache_Increment(v) (v)++ #else #define InstrICache_Stats() #define InstrICache_Increment(v) #endif #endif // notes: // The CHECK_MAX_INSTRUCTIONS macro allows cpu_loop to execute a few // instructions and then return so that the other processors have a chance to // run. This is used only when simulating multiple processors. // // If maximum instructions have been executed, return. A count less // than zero means run forever. #define CHECK_MAX_INSTRUCTIONS(count) \ if (count >= 0) { \ count--; if (count == 0) return; \ } #if BX_SUPPORT_SMP # define BX_TICK1_IF_SINGLE_PROCESSOR() #else # define BX_TICK1_IF_SINGLE_PROCESSOR() BX_TICK1() #endif // Make code more tidy with a few macros. #if BX_SUPPORT_X86_64==0 #define RIP EIP #define RSP ESP #endif void BX_CPU_C::cpu_loop(Bit32s max_instr_count) { unsigned ret; bxInstruction_c iStorage BX_CPP_AlignN(32); bxInstruction_c *i = &iStorage; #if BX_DEBUGGER BX_CPU_THIS_PTR break_point = 0; #if BX_MAGIC_BREAKPOINT BX_CPU_THIS_PTR magic_break = 0; #endif BX_CPU_THIS_PTR stop_reason = STOP_NO_REASON; #endif if (setjmp( BX_CPU_THIS_PTR jmp_buf_env )) { // only from exception function can we get here ... BX_INSTR_NEW_INSTRUCTION(BX_CPU_ID); #if BX_GDBSTUB if (bx_dbg.gdbstub_enabled) { return; } #endif } #if BX_DEBUGGER // If the exception() routine has encountered a nasty fault scenario, // the debugger may request that control is returned to it so that // the situation may be examined. if (bx_guard.special_unwind_stack) { printf("CPU_LOOP %d\n", bx_guard.special_unwind_stack); return; } #endif // We get here either by a normal function call, or by a longjmp // back from an exception() call. In either case, commit the // new EIP/ESP, and set up other environmental fields. This code // mirrors similar code below, after the interrupt() call. BX_CPU_THIS_PTR prev_eip = RIP; // commit new EIP BX_CPU_THIS_PTR prev_esp = RSP; // commit new ESP BX_CPU_THIS_PTR EXT = 0; BX_CPU_THIS_PTR errorno = 0; while (1) { // First check on events which occurred for previous instructions // (traps) and ones which are asynchronous to the CPU // (hardware interrupts). if (BX_CPU_THIS_PTR async_event) { if (handleAsyncEvent()) { // If request to return to caller ASAP. return; } } #if BX_DEBUGGER { bx_address debug_eip = BX_CPU_THIS_PTR prev_eip; if (dbg_is_begin_instr_bpoint( BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, debug_eip, BX_CPU_THIS_PTR get_segment_base(BX_SEG_REG_CS) + debug_eip, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b, Is64BitMode())) { return; } } #endif // #if BX_DEBUGGER #if BX_EXTERNAL_DEBUGGER if (regs.debug_state != debug_run) { bx_external_debugger(BX_CPU_THIS); } #endif bx_address eipBiased = RIP + BX_CPU_THIS_PTR eipPageBias; if (eipBiased >= BX_CPU_THIS_PTR eipPageWindowSize) { prefetch(); eipBiased = RIP + BX_CPU_THIS_PTR eipPageBias; } #if BX_SUPPORT_ICACHE Bit32u pAddr = BX_CPU_THIS_PTR pAddrA20Page + eipBiased; unsigned iCacheHash = BX_CPU_THIS_PTR iCache.hash(pAddr); bxICacheEntry_c *cache_entry = &(BX_CPU_THIS_PTR iCache.entry[iCacheHash]); i = &(cache_entry->i); Bit32u pageWriteStamp = *(BX_CPU_THIS_PTR currPageWriteStampPtr); #if BX_SUPPORT_ICACHE InstrICache_Increment(iCacheLookups); InstrICache_Stats(); #endif if ((cache_entry->pAddr == pAddr) && (cache_entry->writeStamp == pageWriteStamp)) { // iCache hit. Instruction is already decoded and stored in the // instruction cache. #if BX_INSTRUMENTATION // An instruction was found in the iCache. BX_INSTR_OPCODE(BX_CPU_ID, BX_CPU_THIS_PTR eipFetchPtr + eipBiased, i->ilen(), BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b, Is64BitMode()); #endif } else #endif { // iCache miss. No validated instruction with matching fetch parameters // is in the iCache. Or we're not compiling iCache support in, in which // case we always have an iCache miss. :^) bx_address remainingInPage; remainingInPage = (BX_CPU_THIS_PTR eipPageWindowSize - eipBiased); unsigned maxFetch = 15; if (remainingInPage < 15) maxFetch = remainingInPage; Bit8u *fetchPtr = BX_CPU_THIS_PTR eipFetchPtr + eipBiased; #if BX_SUPPORT_ICACHE // The entry will be marked valid if fetchdecode will succeed cache_entry->writeStamp = ICacheWriteStampInvalid; InstrICache_Increment(iCacheMisses); #endif #if BX_SUPPORT_X86_64 if (BX_CPU_THIS_PTR cpu_mode == BX_MODE_LONG_64) ret = fetchDecode64(fetchPtr, i, maxFetch); else #endif ret = fetchDecode(fetchPtr, i, maxFetch); if (ret==0) { #if BX_SUPPORT_ICACHE i = &iStorage; // Leave entry invalid #endif boundaryFetch(fetchPtr, remainingInPage, i); } else { #if BX_SUPPORT_ICACHE // In the case where the page is marked ICacheWriteStampInvalid, all // counter bits will be high, being eqivalent to ICacheWriteStampMax. // In the case where the page is marked as possibly having associated // iCache entries, we need to leave the counter as-is, unless we're // willing to dump all iCache entries which can hash to this page. // Therefore, in either case, we can keep the counter as-is and // replace the fetch mode bits. Bit32u fetchModeMask = BX_CPU_THIS_PTR iCache.fetchModeMask; pageWriteStamp &= ICacheWriteStampMask; // Clear out old fetch mode bits. pageWriteStamp |= fetchModeMask; // Add in new ones. pageWriteStampTable.setPageWriteStamp(pAddr, pageWriteStamp); cache_entry->pAddr = pAddr; cache_entry->writeStamp = pageWriteStamp; #endif #if BX_INSTRUMENTATION // An instruction was either fetched, or found in the iCache. BX_INSTR_OPCODE(BX_CPU_ID, fetchPtr, i->ilen(), BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b, Is64BitMode()); #endif } } bx_address next_RIP = RIP + i->ilen(); if (! Is64BitMode()) { if (((Bit32u) next_RIP - 1) > BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled) { BX_ERROR(("GP(0): instruction cross segment boundary !")); exception(BX_GP_EXCEPTION, 0, 0); } } BxExecutePtr_tR resolveModRM = i->ResolveModrm; // Get as soon as possible for speculation BxExecutePtr_t execute = i->execute; // fetch as soon as possible for speculation if (resolveModRM) BX_CPU_CALL_METHODR(resolveModRM, (i)); // An instruction will have been fetched using either the normal case, // or the boundary fetch (across pages), by this point. BX_INSTR_FETCH_DECODE_COMPLETED(BX_CPU_ID, i); #if BX_DEBUGGER if (BX_CPU_THIS_PTR trace) { // print the instruction that is about to be executed. bx_dbg_disassemble_current (BX_CPU_ID, 1); // only one cpu, print time stamp } #endif // decoding instruction compeleted -> continue with execution BX_INSTR_BEFORE_EXECUTION(BX_CPU_ID, i); if ( !(i->repUsedL() && i->repeatableL()) ) { // non repeating instruction RIP = next_RIP; BX_CPU_CALL_METHOD(execute, (i)); BX_CPU_THIS_PTR prev_eip = RIP; // commit new EIP BX_CPU_THIS_PTR prev_esp = RSP; // commit new ESP BX_INSTR_AFTER_EXECUTION(BX_CPU_ID, i); BX_TICK1_IF_SINGLE_PROCESSOR(); } else { repeat_loop: if (i->repeatableZFL()) { #if BX_SUPPORT_X86_64 if (i->as64L()) { if (RCX != 0) { BX_CPU_CALL_METHOD(execute, (i)); RCX --; } if ((i->repUsedValue()==3) && (get_ZF()==0)) goto repeat_done; if ((i->repUsedValue()==2) && (get_ZF()!=0)) goto repeat_done; if (RCX == 0) goto repeat_done; goto repeat_not_done; } else #endif if (i->as32L()) { if (ECX != 0) { BX_CPU_CALL_METHOD(execute, (i)); ECX --; } if ((i->repUsedValue()==3) && (get_ZF()==0)) goto repeat_done; if ((i->repUsedValue()==2) && (get_ZF()!=0)) goto repeat_done; if (ECX == 0) goto repeat_done; goto repeat_not_done; } else { if (CX != 0) { BX_CPU_CALL_METHOD(execute, (i)); CX --; } if ((i->repUsedValue()==3) && (get_ZF()==0)) goto repeat_done; if ((i->repUsedValue()==2) && (get_ZF()!=0)) goto repeat_done; if (CX == 0) goto repeat_done; goto repeat_not_done; } } else { // normal repeat, no concern for ZF #if BX_SUPPORT_X86_64 if (i->as64L()) { if (RCX != 0) { BX_CPU_CALL_METHOD(execute, (i)); RCX --; } if (RCX == 0) goto repeat_done; goto repeat_not_done; } else #endif if (i->as32L()) { if (ECX != 0) { BX_CPU_CALL_METHOD(execute, (i)); ECX --; } if (ECX == 0) goto repeat_done; goto repeat_not_done; } else { // 16bit addrsize if (CX != 0) { BX_CPU_CALL_METHOD(execute, (i)); CX --; } if (CX == 0) goto repeat_done; goto repeat_not_done; } } // shouldn't get here from above repeat_not_done: BX_INSTR_REPEAT_ITERATION(BX_CPU_ID, i); BX_TICK1_IF_SINGLE_PROCESSOR(); #if BX_DEBUGGER == 0 if (BX_CPU_THIS_PTR async_event) { invalidate_prefetch_q(); goto debugger_check; } goto repeat_loop; #else /* if BX_DEBUGGER == 1 */ invalidate_prefetch_q(); goto debugger_check; #endif repeat_done: RIP = next_RIP; BX_CPU_THIS_PTR prev_eip = RIP; // commit new EIP BX_CPU_THIS_PTR prev_esp = RSP; // commit new ESP BX_INSTR_REPEAT_ITERATION(BX_CPU_ID, i); BX_INSTR_AFTER_EXECUTION(BX_CPU_ID, i); BX_TICK1_IF_SINGLE_PROCESSOR(); } debugger_check: // inform instrumentation about new instruction BX_INSTR_NEW_INSTRUCTION(BX_CPU_ID); #if (BX_SUPPORT_SMP && BX_DEBUGGER==0) // The CHECK_MAX_INSTRUCTIONS macro allows cpu_loop to execute a few // instructions and then return so that the other processors have a chance // to run. This is used only when simulating multiple processors. If only // one processor, don't waste any cycles on it! Also, it is not needed // with the debugger because its guard mechanism provides the same // functionality. CHECK_MAX_INSTRUCTIONS(max_instr_count); #endif #if BX_DEBUGGER // Mode switch support is in dbg_is_begin_instr_bpoint // note instr generating exceptions never reach this point. // (mch) Read/write, time break point support if (BX_CPU_THIS_PTR break_point) { switch (BX_CPU_THIS_PTR break_point) { case BREAK_POINT_TIME: BX_INFO(("[" FMT_LL "d] Caught time breakpoint", bx_pc_system.time_ticks())); BX_CPU_THIS_PTR stop_reason = STOP_TIME_BREAK_POINT; return; case BREAK_POINT_READ: BX_INFO(("[" FMT_LL "d] Caught read watch point", bx_pc_system.time_ticks())); BX_CPU_THIS_PTR stop_reason = STOP_READ_WATCH_POINT; return; case BREAK_POINT_WRITE: BX_INFO(("[" FMT_LL "d] Caught write watch point", bx_pc_system.time_ticks())); BX_CPU_THIS_PTR stop_reason = STOP_WRITE_WATCH_POINT; return; default: BX_PANIC(("Weird break point condition")); } } #if BX_MAGIC_BREAKPOINT // (mch) Magic break point support if (BX_CPU_THIS_PTR magic_break) { if (bx_dbg.magic_break_enabled) { BX_DEBUG(("Stopped on MAGIC BREAKPOINT")); BX_CPU_THIS_PTR stop_reason = STOP_MAGIC_BREAK_POINT; return; } else { BX_CPU_THIS_PTR magic_break = 0; BX_CPU_THIS_PTR stop_reason = STOP_NO_REASON; BX_DEBUG(("Ignoring MAGIC BREAKPOINT")); } } #endif { // check for icount or control-C. If found, set guard reg and return. bx_address debug_eip = BX_CPU_THIS_PTR prev_eip; if (dbg_is_end_instr_bpoint( BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, debug_eip, BX_CPU_THIS_PTR get_segment_base(BX_SEG_REG_CS) + debug_eip, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b, Is64BitMode())) { return; } } #endif // #if BX_DEBUGGER #if BX_GDBSTUB if (bx_dbg.gdbstub_enabled) { unsigned int reason = bx_gdbstub_check(EIP); if (reason != GDBSTUB_STOP_NO_REASON) { return; } } #endif } // while (1) } unsigned BX_CPU_C::handleAsyncEvent(void) { // // This area is where we process special conditions and events. // if (BX_CPU_THIS_PTR debug_trap & 0x80000000) { // I made up the bitmask above to mean HALT state. #if BX_SUPPORT_SMP == 0 BX_CPU_THIS_PTR debug_trap = 0; // clear traps for after resume BX_CPU_THIS_PTR inhibit_mask = 0; // clear inhibits for after resume // for one processor, pass the time as quickly as possible until // an interrupt wakes up the CPU. #if BX_DEBUGGER while (bx_guard.interrupt_requested != 1) #else while (1) #endif { if (BX_CPU_INTR && BX_CPU_THIS_PTR get_IF ()) { break; } if (BX_CPU_THIS_PTR async_event == 2) { BX_INFO(("decode: reset detected in halt state")); break; } BX_TICK1(); } #else /* BX_SUPPORT_SMP */ // for multiprocessor simulation, even if this CPU is halted we still // must give the others a chance to simulate. If an interrupt has // arrived, then clear the HALT condition; otherwise just return from // the CPU loop with stop_reason STOP_CPU_HALTED. if (BX_CPU_INTR && BX_CPU_THIS_PTR get_IF ()) { // interrupt ends the HALT condition BX_CPU_THIS_PTR debug_trap = 0; // clear traps for after resume BX_CPU_THIS_PTR inhibit_mask = 0; // clear inhibits for after resume //bx_printf ("halt condition has been cleared in %s", name); } else { // HALT condition remains, return so other CPUs have a chance #if BX_DEBUGGER BX_CPU_THIS_PTR stop_reason = STOP_CPU_HALTED; #endif return 1; // Return to caller of cpu_loop. } #endif } else if (BX_CPU_THIS_PTR kill_bochs_request) { // setting kill_bochs_request causes the cpu loop to return ASAP. return 1; // Return to caller of cpu_loop. } // Priority 1: Hardware Reset and Machine Checks // RESET // Machine Check // (bochs doesn't support these) // Priority 2: Trap on Task Switch // T flag in TSS is set if (BX_CPU_THIS_PTR debug_trap & 0x00008000) { BX_CPU_THIS_PTR dr6 |= BX_CPU_THIS_PTR debug_trap; exception(BX_DB_EXCEPTION, 0, 0); // no error, not interrupt } // Priority 3: External Hardware Interventions // FLUSH // STOPCLK // SMI // INIT // (bochs doesn't support these) if (BX_CPU_THIS_PTR smi_pending && BX_CPU_THIS_PTR cpu_mode != BX_MODE_IA32_SMM) { BX_PANIC(("SMI: system management mode still not implemented !")); // clear SMI pending flag if accepting SMM ! } // Priority 4: Traps on Previous Instruction // Breakpoints // Debug Trap Exceptions (TF flag set or data/IO breakpoint) if (BX_CPU_THIS_PTR debug_trap && !(BX_CPU_THIS_PTR inhibit_mask & BX_INHIBIT_DEBUG)) { // A trap may be inhibited on this boundary due to an instruction // which loaded SS. If so we clear the inhibit_mask below // and don't execute this code until the next boundary. // Commit debug events to DR6 BX_CPU_THIS_PTR dr6 |= BX_CPU_THIS_PTR debug_trap; exception(BX_DB_EXCEPTION, 0, 0); // no error, not interrupt } // Priority 5: External Interrupts // NMI Interrupts // Maskable Hardware Interrupts if (BX_CPU_THIS_PTR inhibit_mask & BX_INHIBIT_INTERRUPTS) { // Processing external interrupts is inhibited on this // boundary because of certain instructions like STI. // inhibit_mask is cleared below, in which case we will have // an opportunity to check interrupts on the next instruction // boundary. } else if (BX_CPU_INTR && BX_CPU_THIS_PTR get_IF() && BX_DBG_ASYNC_INTR) { Bit8u vector; // NOTE: similar code in ::take_irq() #if BX_SUPPORT_APIC if (BX_CPU_THIS_PTR local_apic.INTR) vector = BX_CPU_THIS_PTR local_apic.acknowledge_int (); else vector = DEV_pic_iac(); // may set INTR with next interrupt #else // if no local APIC, always acknowledge the PIC. vector = DEV_pic_iac(); // may set INTR with next interrupt #endif //BX_DEBUG(("decode: interrupt %u", (unsigned) vector)); BX_CPU_THIS_PTR errorno = 0; BX_CPU_THIS_PTR EXT = 1; /* external event */ interrupt(vector, 0, 0, 0); BX_INSTR_HWINTERRUPT(BX_CPU_ID, vector, BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value, EIP); // Set up environment, as would be when this main cpu loop gets // invoked. At the end of normal instructions, we always commmit // the new EIP/ESP values. But here, we call interrupt() much like // it was a sofware interrupt instruction, and need to effect the // commit here. This code mirrors similar code above. BX_CPU_THIS_PTR prev_eip = RIP; // commit new RIP BX_CPU_THIS_PTR prev_esp = RSP; // commit new RSP BX_CPU_THIS_PTR EXT = 0; BX_CPU_THIS_PTR errorno = 0; } else if (BX_HRQ && BX_DBG_ASYNC_DMA) { // NOTE: similar code in ::take_dma() // assert Hold Acknowledge (HLDA) and go into a bus hold state DEV_dma_raise_hlda(); } // Priority 6: Faults from fetching next instruction // Code breakpoint fault // Code segment limit violation (priority 7 on 486/Pentium) // Code page fault (priority 7 on 486/Pentium) // (handled in main decode loop) // Priority 7: Faults from decoding next instruction // Instruction length > 15 bytes // Illegal opcode // Coprocessor not available // (handled in main decode loop etc) // Priority 8: Faults on executing an instruction // Floating point execution // Overflow // Bound error // Invalid TSS // Segment not present // Stack fault // General protection // Data page fault // Alignment check // (handled by rest of the code) if (BX_CPU_THIS_PTR get_TF ()) { // TF is set before execution of next instruction. Schedule // a debug trap (#DB) after execution. After completion of // next instruction, the code above will invoke the trap. BX_CPU_THIS_PTR debug_trap |= 0x00004000; // BS flag in DR6 } // Now we can handle things which are synchronous to instruction // execution. if (BX_CPU_THIS_PTR get_RF ()) { BX_CPU_THIS_PTR clear_RF (); } #if BX_X86_DEBUGGER else { // only bother comparing if any breakpoints enabled if ( BX_CPU_THIS_PTR dr7 & 0x000000ff ) { Bit32u iaddr = BX_CPU_THIS_PTR get_segment_base(BX_SEG_REG_CS) + BX_CPU_THIS_PTR prev_eip; Bit32u dr6_bits; if ( (dr6_bits = hwdebug_compare(iaddr, 1, BX_HWDebugInstruction, BX_HWDebugInstruction)) ) { // Add to the list of debug events thus far. BX_CPU_THIS_PTR async_event = 1; BX_CPU_THIS_PTR debug_trap |= dr6_bits; // If debug events are not inhibited on this boundary, // fire off a debug fault. Otherwise handle it on the next // boundary. (becomes a trap) if ( !(BX_CPU_THIS_PTR inhibit_mask & BX_INHIBIT_DEBUG) ) { // Commit debug events to DR6 BX_CPU_THIS_PTR dr6 = BX_CPU_THIS_PTR debug_trap; exception(BX_DB_EXCEPTION, 0, 0); // no error, not interrupt } } } } #endif // We have ignored processing of external interrupts and // debug events on this boundary. Reset the mask so they // will be processed on the next boundary. BX_CPU_THIS_PTR inhibit_mask = 0; if ( !(BX_CPU_INTR || BX_CPU_THIS_PTR debug_trap || BX_HRQ || BX_CPU_THIS_PTR get_TF () #if BX_X86_DEBUGGER || (BX_CPU_THIS_PTR dr7 & 0xff) #endif )) BX_CPU_THIS_PTR async_event = 0; return 0; // Continue executing cpu_loop. } // boundaries of consideration: // // * physical memory boundary: 1024k (1Megabyte) (increments of...) // * A20 boundary: 1024k (1Megabyte) // * page boundary: 4k // * ROM boundary: 2k (dont care since we are only reading) // * segment boundary: any void BX_CPU_C::prefetch(void) { // prefetch QSIZE byte quantity aligned on corresponding boundary Bit32u pAddr; bx_address laddrPageOffset0, eipPageOffset0; bx_address temp_rip = RIP; bx_address laddr = BX_CPU_THIS_PTR get_segment_base(BX_SEG_REG_CS) + temp_rip; if (! Is64BitMode()) { Bit32u temp_limit = BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled; if (((Bit32u) temp_rip) > temp_limit) { BX_PANIC(("prefetch: RIP > CS.limit")); exception(BX_GP_EXCEPTION, 0, 0); } } #if BX_SUPPORT_PAGING if (BX_CPU_THIS_PTR cr0.pg) { // aligned block guaranteed to be all in one page, same A20 address pAddr = itranslate_linear(laddr, CPL==3); pAddr = A20ADDR(pAddr); } else #endif // BX_SUPPORT_PAGING { pAddr = A20ADDR(laddr); } // Linear address at the beginning of the page. #if BX_SUPPORT_X86_64 laddrPageOffset0 = laddr & BX_CONST64(0xfffffffffffff000); #else laddrPageOffset0 = laddr & 0xfffff000; #endif // Calculate RIP at the beginning of the page. eipPageOffset0 = RIP - (laddr - laddrPageOffset0); BX_CPU_THIS_PTR eipPageBias = - eipPageOffset0; BX_CPU_THIS_PTR eipPageWindowSize = 4096; // FIXME: BX_CPU_THIS_PTR pAddrA20Page = pAddr & 0xfffff000; BX_CPU_THIS_PTR eipFetchPtr = BX_CPU_THIS_PTR mem->getHostMemAddr(BX_CPU_THIS, BX_CPU_THIS_PTR pAddrA20Page, BX_READ); // Sanity checks if ( !BX_CPU_THIS_PTR eipFetchPtr ) { if ( pAddr >= BX_CPU_THIS_PTR mem->len ) { BX_PANIC(("prefetch : running in bogus memory, pAddr=0x%08x", pAddr)); } else { BX_PANIC(("prefetch: getHostMemAddr vetoed direct read, pAddr=0x%08x", pAddr)); } } #if BX_SUPPORT_ICACHE BX_CPU_THIS_PTR currPageWriteStampPtr = pageWriteStampTable.getPageWriteStampPtr(pAddr); Bit32u pageWriteStamp = *(BX_CPU_THIS_PTR currPageWriteStampPtr); Bit32u fetchModeMask = BX_CPU_THIS_PTR iCache.fetchModeMask; if ((pageWriteStamp & ICacheFetchModeMask) != fetchModeMask) { // The current CPU mode does not match iCache entries for this // physical page. pageWriteStamp &= ICacheWriteStampMask; // Clear out old fetch mode bits. pageWriteStamp |= fetchModeMask; // Add in new ones. pageWriteStampTable.setPageWriteStamp(pAddr, pageWriteStamp); } #endif } void BX_CPU_C::boundaryFetch(Bit8u *fetchPtr, unsigned remainingInPage, bxInstruction_c *i) { unsigned j; Bit8u fetchBuffer[16]; // Really only need 15 unsigned ret; if (remainingInPage >= 15) { BX_INFO(("fetchDecode #GP(0): too many instruction prefixes")); exception(BX_GP_EXCEPTION, 0, 0); } // Read all leftover bytes in current page up to boundary. for (j=0; jilen(), BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.u.segment.d_b, Is64BitMode()); } #if BX_EXTERNAL_DEBUGGER void BX_CPU_C::ask (int level, const char *prefix, const char *fmt, va_list ap) { char buf1[1024]; vsprintf (buf1, fmt, ap); printf ("%s %s\n", prefix, buf1); trap_debugger(1); } void BX_CPU_C::trap_debugger (bx_bool callnow) { regs.debug_state = debug_step; if (callnow) { bx_external_debugger(BX_CPU_THIS); } } #endif // #if BX_EXTERNAL_DEBUGGER #if BX_DEBUGGER extern unsigned dbg_show_mask; bx_bool BX_CPU_C::dbg_is_begin_instr_bpoint(Bit16u cs, bx_address eip, bx_address laddr, bx_bool is_32, bx_bool is_64) { Bit64u tt = bx_pc_system.time_ticks(); BX_CPU_THIS_PTR guard_found.cs = cs; BX_CPU_THIS_PTR guard_found.eip = eip; BX_CPU_THIS_PTR guard_found.laddr = laddr; BX_CPU_THIS_PTR guard_found.is_32bit_code = is_32; BX_CPU_THIS_PTR guard_found.is_64bit_code = is_64; // mode switch breakpoint // instruction which generate exceptions never reach the end of the // loop due to a long jump. Thats why we check at start of instr. // Downside is that we show the instruction about to be executed // (not the one generating the mode switch). if (BX_CPU_THIS_PTR mode_break && (BX_CPU_THIS_PTR dbg_cpu_mode != BX_CPU_THIS_PTR get_cpu_mode())) { BX_INFO(("[" FMT_LL "d] Caught mode switch breakpoint, switching from '%s' to '%s'", bx_pc_system.time_ticks(), cpu_mode_string(BX_CPU_THIS_PTR dbg_cpu_mode), cpu_mode_string(BX_CPU_THIS_PTR get_cpu_mode()))); BX_CPU_THIS_PTR dbg_cpu_mode = BX_CPU_THIS_PTR get_cpu_mode(); BX_CPU_THIS_PTR stop_reason = STOP_MODE_BREAK_POINT; return(1); } // support for 'show' command in debugger if(dbg_show_mask) { int rv = bx_dbg_show_symbolic(); if (rv) return(rv); } // see if debugger is looking for iaddr breakpoint of any type if (bx_guard.guard_for & BX_DBG_GUARD_IADDR_ALL) { #if BX_DBG_SUPPORT_VIR_BPOINT if (bx_guard.guard_for & BX_DBG_GUARD_IADDR_VIR) { if ((BX_CPU_THIS_PTR guard_found.icount!=0) || (tt != BX_CPU_THIS_PTR guard_found.time_tick)) { for (unsigned i=0; i= bx_guard.icount) { BX_CPU_THIS_PTR guard_found.cs = cs; BX_CPU_THIS_PTR guard_found.eip = eip; BX_CPU_THIS_PTR guard_found.laddr = laddr; BX_CPU_THIS_PTR guard_found.is_32bit_code = is_32; BX_CPU_THIS_PTR guard_found.is_64bit_code = is_64; BX_CPU_THIS_PTR guard_found.guard_found = BX_DBG_GUARD_ICOUNT; return(1); } } return(0); // no breakpoint } void BX_CPU_C::dbg_take_irq(void) { unsigned vector; // NOTE: similar code in ::cpu_loop() if ( BX_CPU_INTR && BX_CPU_THIS_PTR get_IF () ) { if ( setjmp(BX_CPU_THIS_PTR jmp_buf_env) == 0 ) { // normal return from setjmp setup vector = DEV_pic_iac(); // may set INTR with next interrupt BX_CPU_THIS_PTR errorno = 0; BX_CPU_THIS_PTR EXT = 1; // external event BX_CPU_THIS_PTR async_event = 1; // set in case INTR is triggered interrupt(vector, 0, 0, 0); } } } void BX_CPU_C::dbg_force_interrupt(unsigned vector) { // Used to force slave simulator to take an interrupt, without // regard to IF if ( setjmp(BX_CPU_THIS_PTR jmp_buf_env) == 0 ) { // normal return from setjmp setup BX_CPU_THIS_PTR errorno = 0; BX_CPU_THIS_PTR EXT = 1; // external event BX_CPU_THIS_PTR async_event = 1; // probably don't need this interrupt(vector, 0, 0, 0); } } void BX_CPU_C::dbg_take_dma(void) { // NOTE: similar code in ::cpu_loop() if ( BX_HRQ ) { BX_CPU_THIS_PTR async_event = 1; // set in case INTR is triggered DEV_dma_raise_hlda(); } } #endif // #if BX_DEBUGGER