Commit Graph

372 Commits

Author SHA1 Message Date
Stanislav Shwartsman
e6adebfe2d Added MMX opcodes to x86-64 mode
Fixed problem with fetching extra byte in ESCx opcodes if FPU is disabled
2002-09-27 09:56:40 +00:00
Stanislav Shwartsman
f987ad036e Changed BxError to UndefinedOpcode function for UD2 opcode (oF 0B) 2002-09-26 18:58:50 +00:00
Peter Tattam
a0d90e9b39 Implemented SYSCALL and SYSRET as part of x86-64 emulation.
Since the SYSCALL replaces the LOADALL instruction, it is incompatible with
earlier CPU types.

At moment, the SYSCALL is only enabled by x86-64 emulation, but the code
can be incorporated in IA32 only emulations.

Instructions added:

0F 05		SYSCALL		(replaces LOADALL)
0F 07		SYSRET		(new)

TODO:  restructure #if ... so that it can be used by non x86-64 emulations.
2002-09-25 12:54:41 +00:00
Kevin Lawton
b742ccec7e Changed eflags accessors for get_?F() to use (val32 & (1<<N)) instead
of (1 & (val32>>N)), and added a getB_?F() accessor for special
  cases which need a strict binary value (exactly 0 or 1).  Most
  code only needed a value for logical comparison.  I modified the
  special cases which do need a binary number for shifting and
  comparison between flags, to use the special getB_?F() accessor.

Cleaned up memory.cc functions a little, now that all accesses
  are within a single page.

Fixed a (not very likely encountered) bug in fetchdecode.cc (and
  fetchdecode64.cc) where a 2-byte opcode starting with a prefix
  starts at the last offset on a page.  There were no checks
  on the segment overrides for a boundary condition.  I added them.

The eflags enhancements added just a tiny bit of performance.
2002-09-22 18:22:24 +00:00
Kevin Lawton
3bfeab23c9 Split out JZ/JNZ instructions from JCC because they were called
so frequently.
Coded asm() statements for INC/DEC_ERX() instructions.
Cleaned up the iCache a litle including a bug fix.  The
  generation ID was decrementing the whole field including
  some high meta bits.  That could roll over after 1 Billion
  cycles.  I know only decrement if the field is valid, to
  save the write.
I implemented inline functions which can serve the value of
  the arithmetic flags if they are cached, and redirect to
  the lazy_flags.cc routines if not.
Most of this was just prep work for adding more asm() statements
  for native eflags processing when on x86.
2002-09-22 01:52:21 +00:00
Kevin Lawton
e2e219eda0 Modified the way that the register field (low 3 bits of a few opcodes
also extended by the REX.B field on Hammer) is passed to instructions.
I rearranged the bxInstruction_c to free up a field to be used
to pass this info when mod-rm bytes are not used.  This got rid
of the ugly ((i->b1 & 7) + i->rex_b) code.

Probably shaved just a very little run time off Hammer emulation,
and even less on x86-32.  The resultant is a little cleaner anyways.
2002-09-20 23:17:51 +00:00
Kevin Lawton
402d02974d Moved the EFLAGS.RF check and clearing of inhibit_mask code
in cpu.cc out of the main loop, and into the asynchronous
events handling.  I went through all the code paths, and
there doesn't seem to be any reason for that code to be
in the hot loop.

Added another accessor for getting instruction data, called
modC0().  A lot of instructions test whether the mod field
of mod-nnn-rm is 0xc0 or not, ie., it's a register operation
and not memory.  So I flag this in fetchdecode{,64}.cc.
This added on the order of 1% performance improvement for
a Win95 boot.

Macroized a few leftover calls to Write_RMV_virtual_xyz()
that didn't get modified in the x86-64 merge.  Really, they
just call the real function for now, but I want to have them
available to do direct writes with the guest2host TLB pointers.
2002-09-20 03:52:59 +00:00
Kevin Lawton
0cd7346b9c - Added an instruction cache. Size is fixed for the moment,
but if you hand edit cpu/cpu.h, and change BxICacheEntries,
  you can try different sizes.  I'll make this more flexible
  with configure.  For now, use "--enable-icache" with no parameters.

- Modified fetchdecode.cc/fetchdecode64.cc just enough so that
  instructions which encode a direct address now use a memory
  resolution function which just sticks the immediate address
  into rm_addr.  With cached instructions we need this.
2002-09-19 19:17:20 +00:00
Kevin Lawton
4e51dcae40 Converted all the remaining available separate fields in bxInstruction_c
to bitfields.  bxInstruction_c is now 24 bytes, including 4 for
the memory addr resolution function pointer, and 4 for the
execution function pointer (16 + 4 + 4).

Coded more accessors, to abstract access from most code.
2002-09-18 08:00:43 +00:00
Kevin Lawton
6723ca9bf4 Moved more separate fields in the bxInstruction_c into bitfields
with accessors.  Had to touch a number of files to update the
access using the new accessors.

Moved rm_addr to the CPU structure, to slim down bxInstruction_c
and to prevent future instruction caching from getting sprayed
with writes to individual rm_addr fields.  There only needs to
be one.  Though need to deal with instructions which have
static non-modrm addresses, but which are using rm_addr since
that will change.

bxInstruction_c is down to about 40 bytes now.  Trying to
get down to 24 bytes.
2002-09-18 05:36:48 +00:00
Kevin Lawton
07b0df2a8a Updated accessing of modrm/sib addressing information to
use accessors.  This lets me work on compressing the
size of fetch-decode structure (now called bxInstruction_c).

I've reduced it down to about 76 bytes.  We should be able
to do much better soon.  I needed the abstraction of the
accessors, so I have a lot of freedom to re-arrange things
without making massive future changes.

Lost a few percent of performance in these mods, but my
main focus was to get the abstraction.
2002-09-17 22:50:53 +00:00
Kevin Lawton
3d4210fd3f Got rid of a couple fields in BxInstruction_t that were
no longer used.  Also rearranged that struct a little
to be more compressed.  Over time, I'm going to reduce
it further, for use with future accelerations.
2002-09-17 04:20:42 +00:00
Kevin Lawton
d16fcfce91 (cpu64) Merged fetchdecode.cc. Also, I had some problems with
circular dependencies between 3 cpu related libs that I need
as part of this transition.  I changed the "ar rv" to "ld -i -o"
to do an incremental load instead of an archive.  Hope this
doesn't break any platforms.  We can reset this later.
2002-09-13 23:59:24 +00:00
Bryce Denney
be659a09b3 - check in Stanislav Shwartsman's patch "bochs-mmx.patch-endian-support".
He writes: Detailed description: MMX instruction set support.
  Also supports BIG_ENDIAN systems. Tested on Solaris and HP1100.
- modified files:
    configure.in cpu/Makefile.in cpu/cpu.h cpu/fetchdecode.cc
    cpu/proc_ctrl.cc fpu/fpu_system.h fpu/wmFPUemu_glue.cc
- added files: cpu/i387.h cpu/mmx.cc
2002-09-09 16:11:25 +00:00
Kevin Lawton
3f2d28f86c Added guest2host TLB tricks to read-modify-write variants of
access routines in access.cc, completing the upgrade of
those routines.  You do need '--enable-guest2host-tlb', before
you get the speedups for now.  The guest2host mods seem pretty
solid, though I do need to see what effects the A20 line has
on this cache and the paging TLB in general.
2002-09-03 04:54:28 +00:00
Bryce Denney
daf2a9fb55 - add RCS Id to header of every file. This makes it easier to know what's
going on when someone sends in a modified file.
2001-10-03 13:10:38 +00:00
Todd T.Fries
2bbb1ef8eb strip '\n' from BX_{INFO,DEBUG,ERROR,PANIC}
don't need it, moved the output of it into the general io functions.
saves space, as well as removes the confusing output if a '\n' is left off
2001-05-30 18:56:02 +00:00
Bryce Denney
49664f7503 - parts of the SMP merge apparantly broke the debugger and this revision
tries to fix it.  The shortcuts to register names such as AX and DL are
  #defines in cpu/cpu.h, and they are defined in terms of BX_CPU_THIS_PTR.
  When BX_USE_CPU_SMF=1, this works fine.  (This is what bochs used for
  a long time, and nobody used the SMF=0 mode at all.)  To make SMP bochs
  work, I had to get SMF=0 mode working for the CPU so that there could
  be an array of cpus.

  When SMF=0 for the CPU, BX_CPU_THIS_PTR is defined to be "this->" which
  only works within methods of BX_CPU_C.  Code outside of BX_CPU_C must
  reference BX_CPU(num) instead.
- to try to enforce the correct use of AL/AX/DL/etc. shortcuts, they are
  now only #defined when "NEED_CPU_REG_SHORTCUTS" is #defined.  This is
  only done in the cpu/*.cc code.
2001-05-24 18:46:34 +00:00
Bryce Denney
e61d00351f - merged BRANCH-smp-bochs into main branch. For details see comments
in BRANCH-smp-bochs revisions.
- The general task was to make multiple CPU's which communicate
  through their APICs.  So instead of BX_CPU and BX_MEM, we now have
  BX_CPU(x) and BX_MEM(y).  For an SMP simulation you have several
  processors in a shared memory space, so there might be processors
  BX_CPU(0..3) but only one memory space BX_MEM(0).  For cosimulation,
  you could have BX_CPU(0) with BX_MEM(0), then BX_CPU(1) with
  BX_MEM(1).  WARNING: Cosimulation is almost certainly broken by the
  SMP changes.
- to simulate multiple CPUs, you have to give each CPU time to execute
  in turn.  This is currently implemented using debugger guards.  The
  cpu loop steps one CPU for a few instructions, then steps the
  next CPU for a few instructions, etc.
- there is some limited support in the debugger for two CPUs, for
  example printing information from each CPU when single stepping.
2001-05-23 08:16:07 +00:00
Todd T.Fries
bdb89cd364 merge in BRANCH-io-cleanup.
To see the commit logs for this use either cvsweb or
cvs update -r BRANCH-io-cleanup and then 'cvs log' the various files.

In general this provides a generic interface for logging.

logfunctions:: is a class that is inherited by some classes, and also
.   allocated as a standalone global called 'genlog'.  All logging uses
.   one of the ::info(), ::error(), ::ldebug(), ::panic() methods of this
.   class through 'BX_INFO(), BX_ERROR(), BX_DEBUG(), BX_PANIC()' macros
.   respectively.
.
.   An example usage:
.     BX_INFO(("Hello, World!\n"));

iofunctions:: is a class that is allocated once by default, and assigned
as the iofunction of each logfunctions instance.  It is this class that
maintains the file descriptor and other output related code, at this
point using vfprintf().  At some future point, someone may choose to
write a gui 'console' for bochs to which messages would be redirected
simply by assigning a different iofunction class to the various logfunctions
objects.

More cleanup is coming, but this works for now.  If you want to see alot
of debugging output, in main.cc, change onoff[LOGLEV_DEBUG]=0 to =1.

Comments, bugs, flames, to me: todd@fries.net
2001-05-15 14:49:57 +00:00
Bryce Denney
a6fef54678 - update copyright dates to 2001 for all mandrake headers
- for bochs files with other header, replaced with current mandrake header
2001-04-10 02:20:02 +00:00
cvs
beff63eb32 - entered original Bochs snapshot bochs-2000_0325a.tar.gz from
ftp.bochs.com
2001-04-10 01:04:59 +00:00