bochs.h already not include iodev.h which reduces compilation dependences for almost all cpu and fpu files, now cpu files will not be recompiled if iodev includes was changed
Authors: Br'fin, Bryce
- for MacOSX/Carbon, if you start the app by double clicking in the finder,
there is no text console. So in logfunctions::fatal(), display the
final message in a Carbon dialog instead of using fprintf.
- in the text-mode config interface, return an error code if the
user tries to use the text menus when there's no text console.
Back in bxmain() this error code causes a panic
"Bochs needed the text console, but it was not usable"
- if a config file was not found, normally we turn off quick start
and drop into the text menus. However in the no-console case the
text menus won't work, so we added a panic: Unable to start Bochs
without a bochsrc.txt and without a text console. This is a much
more useful error than the generic one above.
- removed ensure_text_console() which was making matters worse instead
of better.
Modified Files:
logio.cc main.cc gui/siminterface.cc gui/siminterface.h gui/textconfig.cc
This fixes bug #614724: SDL can get stuck in full-screen mode, and provides
a framework for fixing the problem on other full-screen display libraries
such as term, svga, etc.
- add virtual method bx_gui::set_display_mode(mode) which can be overridden
by each display library class, if appropriate. This method is primarily
used when you run Bochs full screen, to tell the gui to switch from full
screen back to a mode where you can use the text console.
- There are two display modes: config and simulation. The mode is changed to
config mode during logfunctions::ask, during the runtime configuration menu,
and before displaying a debugger prompt. It is changed back to simulation
mode whenever instructions are running.
- Instead of being called directly through the global bx_gui pointer, the
bx_gui_c::set_display_mode() method is almost always accessed through
siminterface, like this:
SIM->set_display_mode (DISP_MODE_CONFIG);
SIM->set_display_mode (DISP_MODE_SIM);
Of course siminterface just passes the call on to bx_gui::set_display_mode().
I added it to siminterface so that the config interfaces could call it.
(They don't #include bochs.h so they can't access bx_gui.)
Modified Files:
logio.cc main.cc debug/dbg_main.cc gui/gui.h gui/sdl.cc
gui/siminterface.cc gui/siminterface.h
"bx_bool" which is always defined as Bit32u on all platforms. In Carbon
specific code, Boolean is still used because the Carbon header files
define it to unsigned char.
- this fixes bug [ 623152 ] MacOSX: Triple Exception Booting win95.
The bug was that some code in Bochs depends on Boolean to be a
32 bit value. (This should be fixed, but I don't know all the places
where it needs to be fixed yet.) Because Carbon defined Boolean as
an unsigned char, Bochs just followed along and used the unsigned char
definition to avoid compile problems. This exposed the dependency
on 32 bit Boolean on MacOS X only and led to major simulation problems,
that could only be reproduced and debugged on that platform.
- On the mailing list we debated whether to make all Booleans into "bool" or
our own type. I chose bx_bool for several reasons.
1. Unlike C++'s bool, we can guarantee that bx_bool is the same size on all
platforms, which makes it much less likely to have more platform-specific
simulation differences in the future. (I spent hours on a borrowed
MacOSX machine chasing bug 618388 before discovering that different sized
Booleans were the problem, and I don't want to repeat that.)
2. We still have at least one dependency on 32 bit Booleans which must be
fixed some time, but I don't want to risk introducing new bugs into the
simulation just before the 2.0 release.
Modified Files:
bochs.h config.h.in gdbstub.cc logio.cc main.cc pc_system.cc
pc_system.h plugin.cc plugin.h bios/rombios.c cpu/apic.cc
cpu/arith16.cc cpu/arith32.cc cpu/arith64.cc cpu/arith8.cc
cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer16.cc cpu/ctrl_xfer32.cc
cpu/ctrl_xfer64.cc cpu/data_xfer16.cc cpu/data_xfer32.cc
cpu/data_xfer64.cc cpu/debugstuff.cc cpu/exception.cc
cpu/fetchdecode.cc cpu/flag_ctrl_pro.cc cpu/init.cc
cpu/io_pro.cc cpu/lazy_flags.cc cpu/lazy_flags.h cpu/mult16.cc
cpu/mult32.cc cpu/mult64.cc cpu/mult8.cc cpu/paging.cc
cpu/proc_ctrl.cc cpu/segment_ctrl_pro.cc cpu/stack_pro.cc
cpu/tasking.cc debug/dbg_main.cc debug/debug.h debug/sim2.cc
disasm/dis_decode.cc disasm/disasm.h doc/docbook/Makefile
docs-html/cosimulation.html fpu/wmFPUemu_glue.cc
gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/gui.cc gui/gui.h
gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc
gui/rfb.cc gui/sdl.cc gui/siminterface.cc gui/siminterface.h
gui/term.cc gui/win32.cc gui/wx.cc gui/wxmain.cc gui/wxmain.h
gui/x.cc instrument/example0/instrument.cc
instrument/example0/instrument.h
instrument/example1/instrument.cc
instrument/example1/instrument.h
instrument/stubs/instrument.cc instrument/stubs/instrument.h
iodev/cdrom.cc iodev/cdrom.h iodev/cdrom_osx.cc iodev/cmos.cc
iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_arpback.cc
iodev/eth_packetmaker.cc iodev/eth_packetmaker.h
iodev/floppy.cc iodev/floppy.h iodev/guest2host.h
iodev/harddrv.cc iodev/harddrv.h iodev/ioapic.cc
iodev/ioapic.h iodev/iodebug.cc iodev/iodev.h
iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.h
iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pic.h
iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h
iodev/sb16.cc iodev/sb16.h iodev/serial.cc iodev/serial.h
iodev/vga.cc iodev/vga.h memory/memory.h memory/misc_mem.cc
wx behavior worked out, I'll take out the ifdef and settle on something.
- use new enums BX_LOG_ASK_CHOICE_CONTINUE, BX_LOG_ASK_CHOICE_DIE, etc.
- do not use BX_PANIC inside fatal function! it is very likely to reenter,
causing infinite recursion. Use fprintf instead.
time, so I've tried to improve it. Now the logfunctions class has a
static field default_onoff[] which represents the default actions for
each kind of log message. Default_onoff[] is initialized with static
data so it should be valid by the time it's used. This can be reached by
static accesors logfunctions::set_default_action and
logfunctions::get_default_action. It seemed appropriate to put the defaults
inside the logfunctions class, rather than in bx_options or siminterface.
However, to make them accessible to the config interface, I added similar
methods in siminterface that map to the accessors in logfunctions.
- logio.cc had two different definitions of LOG_THIS for different halves
of the file, which was ugly and confusing. (LOG_THIS is needed for BX_INFO,
BX_DEBUG, etc.) I removed the first definition and fixed the minor compile
problems that ensued. In the initializers for iofunctions, everything
is complicated because of the unpredictable order that constructors get
called. They must use this->log to print things, because genlog hasn't
been initialized yet.
- now if SIM->set_log_action(int mod, int level, int action) is called
with mod<0, it sets the action for all modules/devices instead of just one.
- modified: bochs.h logio.cc main.cc gui/siminterface.cc gui/siminterface.h
- add get_erx() method to bx_gen_reg_t which returns the erx field of the
structure (which is has a different name in cpu and cpu64). Providing
an accessor is one strategy for avoiding igly "#ifdef BX_SUPPORT_X86_64"
statements in the rest of the code.
- cpu64/init.cc: the "eflags" before get_flag and set_flag is no longer
correct. removed.
- modified files: load32bitOShack.cc logio.cc cpu/cpu.h cpu64/apic.cc
cpu64/cpu.h cpu64/init.cc cpu64/proc_ctrl.cc debug/dbg_main.cc
This adds a whole new directory cpu64 with the new emulation code.
Very few changes were necessary outside cpu64. To try it, configure
with --enable-x86-64 and make.
- also this adds Peter Tattam's external debugger interface.
- modified files: Makefile.in bochs.h config.h.in configure.in
load32bitOShack.cc logio.cc cpu/Makefile.in cpu/cpu.cc debug/dbg_main.cc
- added files: cpu/extdb.cc cpu/extdb.h and cpu64/*
to get default values, but I didn't initialize bx_options until
bx_init_options(). I still think that removing the initializer
was the right choice, so I made a macro in bochs.h called
DEFAULT_LOG_ACTIONS(level) that supplies the defaults instead.
again. This means that the simulation needs to stop in a consistent state,
including the "reentry check" variables in logfunctions::fatal() and
logfunctions::ask().
- fatal() is supposed to quit the simulation. add a clear panic message if it
doesn't quit, but remove the reentry check. The reentry check was causing
problems when you stop and start the simulation again.
- in ask(), keep the reentry check but set in_ask_already=0 before
calling fatal() so that ask() works if we start the simulation again.
and complain if fatal() fails to die.
to describe the format of the log prefix. This option can be any string
with special tokens being replaced at run time :
# %t : 11 decimal digits timer tick
# %i : 8 hexadecimal digits of cpu0 current eip
# %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
# %d : 5 characters string of the device, between brackets
the default is "%t%i%d", so the logprefix is the same as before.
New tokens can be easily added or changed if needed.
Modified Files:
.bochsrc bochs.h logio.cc main.cc gui/control.cc
gui/siminterface.h gui/siminterface.cc
patches/patch.logfilefmteip
objects point to the io object, it is not safe to delete the io object
as soon as the first logfunctions object is deleted. This leaves all the
other logfunctions objects with pointers to a dead object.
useful because sometimes useful messages are printed on the screen just
before a panic. It's also potentially dangerous if the vga update function
calls ask() again...so I added a re-entry check.
will dump core, and the core can sometimes be loaded into the debugger
to give some hints as to what is going on. This could be especially
useful when the bochs debugger is off.
- try to do something reasonable when abort() doesn't exist on the system.
