Make save/restore default feature, the configure option for save/restore removed from configure script and save/restore made available forever. All code now assume it is exists. Bochs save/restore tree previosly called "save_restore" renamed to "bochs" tree and it will be havily used everywhere, starting from save/restore and ending by various bochs debugger functions. I am going to rework debugger code to get rid of debug CPU access functions and use this "bochs" param tree instead
a Bochs session unless the configuration (transfer mode) changes. Then the
"drive id" data is simply copied to the output buffer.
- removed unused "drive id" example (Conner CFA540A)
- added stubs for the ATA flush cache commands
- converted some tabs to spaces
done by the object destructor (changes in cmos, hard drive and keyboard)
- bx_unload_plugins() now deletes the devmodel object in non-plugin mode
- CMOS device now prints the time on exit in human-readable format
unregister_irq(). This is required since there are some devices that don't
use a string constant for the handler name.
- replaced true / false by portable 0 / 1 values.
(TODO: find a way to call plugin_fini() for non-core devices if plugins are
disabled)
- set the device pointers back to stubs after unloading plugins
- added debug message "Exit" in all device plugin destructors
not when reading the error register
- the DSC status bit is not cleared in case of an error
- a not existing drive does not set the ERR status bit and the error register
- all messages related to correctly aborted commands on non-disk devices changed
to type BX_INFO
- some other log message output cleanups
- ATA command 'set multiple mode' fixed (missing interrupt and value check)
- hard disk sector read/write rewritten and simplified
- hard disk now reporting ATA-3 supported
- updated drive buffer size for save/restore
read/write commands)
- prepared i/o buffer for multi sector transfers
- power management commands "standby now" and "idle immediate" now returning success
- store size of virtual disk in sparse header to simplify geometry detection/check
- enabling geometry autodetection causes a panic if not supported by image
- simplified geometry detection code
- unsupported ATAPI commands now cause a BX_DEBUG message and no addtional
error code info (avoid flooding log file)
- a bunch of image size handling changes
* 'hd_size' contains the size of the virtual hard disk (for geometry check/detection)
* passing the size calculated from the geometry not needed in some cases
- indent mode changes
- siminterface get_param_*() methods num support a base parameter like the generic
get_param() method
- new parameter lists now also have a generated id
- test function print_tree() now handles enum parameters correctly
- proposed parameter tree updated
- clock/cmos menu added in textconfig and wx
- enum parameter type now supports new parameter handling
- long text format for numeric parameters added (useful when both textconfig and
wx are present)
- wx: handling of list flag USE_BOX_TITLE fixed
- textconfig: optional memory features moved to submenus
- siminterface generates a unique id for new parameters (used for wx dependencies)
- proposed parameter tree updated
- floppy options init code cleanup (still using old-style parameters)
* ports for error register, sector count and sector number are shared between
both drives
* status register always returns the values of the selected drive (0x00 if
not present
* set correct signature for both drives in case of reset
- read raw toc for image files and platforms other than Windows XP implemented (ported from qemu)
- several cdrom capacity fixes / report capacity only on Bochs init and cdrom change
- flag 'using_file' must be set to 0 for WIN32 ASPI or direct access
- multisession format handling removed from harddrv.cc (now handled in cdrom code)
- ATAPI error messages improved
- prepared ATAPI buffer for block size 2352
- read_block() now returns a bx_bool value and panic moved to hard drive code
- insert_cdrom() now uses read_block() to test the media presence
- small code cleanups
- sense code ASC_ILLEGAL_OPCODE added for unimplemented/unknown ATAPI commands
- some panics changed to errors
- unsupported bits message in drive and head register changed to BX_DEBUG
- improved info about not existing drive
- indent mode fixed in ATAPI packet command section
- cmos image options renamed
- new cmos option controls the usage of the RTC values from image
- report time0 in use after handling the cmos image stuff
- MSVC warning fixed
- BM-DMA base address set to 0xc000 at reset (shoud be done by the PCI BIOS)
- BM-DMA status register write messages changed to BX_DEBUG
- fixed an MSVC warning in the harddrive code
images created with bximage (heads = 16, sectors per track = 63)
- size check for 'flat' hard disk images added. The image size is now compared
with the size calculated from the geometry.
* added prefix "ataX-Y:" to panic mesages (X=channel, Y=drive)
* added command_aborted() call after the panic
* fixed indent mode in the modified section
- report the cdrom capacity in megabytes instead of bytes
- don't flood the logfile with error messages when the guest OS checks the cdrom
unit periodicly for media presence
code. Up to 3 boot drives are supported now. TODO: new boot dialog for wx.
- config.cc: missing ask formats for enum parameters added
- wxdialog.cc: tab window now uses the label instead of the ask format if defined
bochs.h already not include iodev.h which reduces compilation dependences for almost all cpu and fpu files, now cpu files will not be recompiled if iodev includes was changed
* changed all %ll format descriptions to FMT_LL macro so that
Microsoft Visual C works correctly (it uses %I64)
* missing type conversions added
* cdrom.cc: variable types for win32 fixed
* removed some unused variables in eth_win32.cc and harddrv.cc
* added missing includes in make_cmos_image.c and niclist.c
You can now choose for each disk on the ata interfaces the
disk mode, between :
- flat : one file flat layout
- concat : multiple files layout
- external : developer's specific, through a C++ class
- dll : developer's specific, through a DLL
- sparse : stackable, commitable, rollbackable
- vmware3 : vmware3 disk support
- undoable : flat file with commitable redolog
- growable : growing file
- volatile : flat file with volatile redolog
- z-undoable : gziped flat file with commitable redolog
- z-volatile : gziped flat file with volatile redolog
A new "bxcommit" utility can merge commitable redologs to
flat images.
- it works only on x86 with gcc2.95+
- uses the GCC function atribute "regparm(n)" to declare that certain
functions use the register calling convention
- performance improvement is about 6%
. read port 0x70 (cmos) : return index
. atapi function 46 and 4a : return error
- put back the log prefix for cmos that disappeared when we did the plugins
- if translation=auto :
. translation=none if cylinders <=1024 and heads <=16
. translation=large if cylinders * heads <= 131072
. transaltion=lba otherwise
- changes default translation value to "auto"
- add example in .bochsrc
"bx_bool" which is always defined as Bit32u on all platforms. In Carbon
specific code, Boolean is still used because the Carbon header files
define it to unsigned char.
- this fixes bug [ 623152 ] MacOSX: Triple Exception Booting win95.
The bug was that some code in Bochs depends on Boolean to be a
32 bit value. (This should be fixed, but I don't know all the places
where it needs to be fixed yet.) Because Carbon defined Boolean as
an unsigned char, Bochs just followed along and used the unsigned char
definition to avoid compile problems. This exposed the dependency
on 32 bit Boolean on MacOS X only and led to major simulation problems,
that could only be reproduced and debugged on that platform.
- On the mailing list we debated whether to make all Booleans into "bool" or
our own type. I chose bx_bool for several reasons.
1. Unlike C++'s bool, we can guarantee that bx_bool is the same size on all
platforms, which makes it much less likely to have more platform-specific
simulation differences in the future. (I spent hours on a borrowed
MacOSX machine chasing bug 618388 before discovering that different sized
Booleans were the problem, and I don't want to repeat that.)
2. We still have at least one dependency on 32 bit Booleans which must be
fixed some time, but I don't want to risk introducing new bugs into the
simulation just before the 2.0 release.
Modified Files:
bochs.h config.h.in gdbstub.cc logio.cc main.cc pc_system.cc
pc_system.h plugin.cc plugin.h bios/rombios.c cpu/apic.cc
cpu/arith16.cc cpu/arith32.cc cpu/arith64.cc cpu/arith8.cc
cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer16.cc cpu/ctrl_xfer32.cc
cpu/ctrl_xfer64.cc cpu/data_xfer16.cc cpu/data_xfer32.cc
cpu/data_xfer64.cc cpu/debugstuff.cc cpu/exception.cc
cpu/fetchdecode.cc cpu/flag_ctrl_pro.cc cpu/init.cc
cpu/io_pro.cc cpu/lazy_flags.cc cpu/lazy_flags.h cpu/mult16.cc
cpu/mult32.cc cpu/mult64.cc cpu/mult8.cc cpu/paging.cc
cpu/proc_ctrl.cc cpu/segment_ctrl_pro.cc cpu/stack_pro.cc
cpu/tasking.cc debug/dbg_main.cc debug/debug.h debug/sim2.cc
disasm/dis_decode.cc disasm/disasm.h doc/docbook/Makefile
docs-html/cosimulation.html fpu/wmFPUemu_glue.cc
gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/gui.cc gui/gui.h
gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc
gui/rfb.cc gui/sdl.cc gui/siminterface.cc gui/siminterface.h
gui/term.cc gui/win32.cc gui/wx.cc gui/wxmain.cc gui/wxmain.h
gui/x.cc instrument/example0/instrument.cc
instrument/example0/instrument.h
instrument/example1/instrument.cc
instrument/example1/instrument.h
instrument/stubs/instrument.cc instrument/stubs/instrument.h
iodev/cdrom.cc iodev/cdrom.h iodev/cdrom_osx.cc iodev/cmos.cc
iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_arpback.cc
iodev/eth_packetmaker.cc iodev/eth_packetmaker.h
iodev/floppy.cc iodev/floppy.h iodev/guest2host.h
iodev/harddrv.cc iodev/harddrv.h iodev/ioapic.cc
iodev/ioapic.h iodev/iodebug.cc iodev/iodev.h
iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.h
iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pic.h
iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h
iodev/sb16.cc iodev/sb16.h iodev/serial.cc iodev/serial.h
iodev/vga.cc iodev/vga.h memory/memory.h memory/misc_mem.cc
empty pathnames, zero cylinders, etc. It doesn't seem fair to allow
people to write out bochsrcs that they cannot read back in without
patching them up by hand!
- in harddrv.cc add the equivalent checks with BX_PANICs so that at least
we don't start simulating with incomplete device configuration.
- make a few error messages more clear
- modified: main.cc iodev/harddrv.cc
From his patch file text:
> This patch adds Promise DC2300 VLB IDE Support.
> You may find msdos and win95 drivers on the net. Look for
> P2300W95.ZIP and DC2300VLBIDEver260b.ZIP.
>
> The good news is that now win95 natively sees my cdrom,
> and that the disks are not in msdos compatibility mode any more.
>
> The bad news is that it works only for the first ata interface.
>
> I tested that patch on msdos and win95 only.
>
> Some info on VLB IDE can be found at http://ryston.cz/petr/vlb/
I got Win95 running with 32-bit paging/filesystem using the
recommended driver and these patches. Since the patches did
such a good job bracketing code modifications with a #define,
they might as well become part of the current CVS code.
- Features :
. number of active channels defined at boot-time config
. new options in bochsrc
. up to 8 devices support (disks or cdroms)
. up to 4 cdrom devices can be changed at runtime config
. wxwindows config interface
to request bulk IO operations to IO devices which are bulk IO aware.
Currently, I modified only harddrv.cc to be aware. I added some
fields to the bx_devices_c class for the IO instructions to
place requests and receive responses from the IO device emulation.
Devices except the hard drive, don't monitor these fields so they
respond as normal. The hard drive now monitors these fields for
bulk requests, and if enabled, it memcpy()'s data straight from
the disk buffer to memory. This eliminates numerous inp/outp calling
sequences per disk sector.
I used the fields in bx_devices_c so that I would not have to
disrupt most IO device modules. Enhancements can be made to
other devices if they use high-bandwidth IO via in/out instructions.
Some devices already had one. Some I had to add an empty one.
I did a little cleaning of init() methods to make them more uniform
but generally I left them alone.
- I also put these exact diffs into a patch "patch.iodev-add-reset"
in case I want to revert these changes for some reason, for example
if they break an old patch. It should be deleted after a while.
more work in the floppy and bios code.
- floppy and cdrom entries in the runtime config menu can be disabled if the
drive wasn't defined in bochsrc or start menu
- floppy variable "initial_status" and cdrom variable "inserted" renamed to
"status"
- unused variable *ips in function build_runtime_options_prompt() disabled
controller returns an error code until we are able to implement this feature.
- init_send_atapi_command(): don't panic if alloc_length is 0, use byte_count
to set alloc_length instead
- fixed a BX_PANIC message in the io write handler for port 0x1f0
