Michael Brown
b29e94b334
Fixed segfault on attempt to build with PNIC support.
2004-01-29 17:33:45 +00:00
Volker Ruppert
ac28f72551
- multiple parallel port support added (2 ports are available now)
...
- parport irq is now only registered in irq mode
- bx_reset_options() updated for multiple parallel and serial ports
2004-01-27 21:38:51 +00:00
Christophe Bothamy
df2030c60b
- completely desactivate code for compressed hd for now.
...
this fixes bug #883239
2004-01-26 00:55:23 +00:00
Volker Ruppert
b2b9d5bd53
- com port number added to all debug/info/error/panic messages
2004-01-25 13:01:29 +00:00
Volker Ruppert
897695270b
- notify the display library if the bpp value changes (switching from VBE to VGA mode)
2004-01-24 20:50:45 +00:00
Christophe Bothamy
d62e9c7a4c
- fix out of bound index on COW_images array, as suggested by Sharvil Nanavati
2004-01-19 23:25:47 +00:00
Christophe Bothamy
2117cdae7d
- apply patches from Ben Lunt :
...
* do not panic when "calibrate drive" is issued to non disk
* warn that "set tranfert mode" command not supported
2004-01-19 21:48:07 +00:00
Volker Ruppert
c1808b14f4
- allow 16 bit writes to page 0 (patch from Kenneth Stailey)
2004-01-19 17:53:53 +00:00
Christophe Bothamy
3436662995
- fix for vmware3 cow disk on big-endian platforms
2004-01-18 16:39:02 +00:00
Volker Ruppert
264029fdee
- raw serial support prepared for 4 ports
...
- fixes for compiling on win32
- unnecessary includes removed
- description updated
- converted tabs to spaces
2004-01-18 11:58:07 +00:00
Daniel Gimpelevich
f11fdab54b
Added preliminary hack to use TUN mode instead of TAP.
...
Still doesn't work, though.
2004-01-18 06:15:38 +00:00
Volker Ruppert
92c0f1e300
- fixes to make serial_raw stuff compile (still a dummy)
2004-01-18 01:30:14 +00:00
Volker Ruppert
24bee7ee43
- multiple serial port support completed (4 port are available now)
...
- rx_fifo_enq() call fixed
- unnecessary BX_INFO removed
2004-01-18 00:18:44 +00:00
Volker Ruppert
8b640bface
- serial read/write and timer handlers prepared for 4 ports
...
- new function triggeredTimerID() returns the active ID in timer handler
2004-01-17 15:51:09 +00:00
Daniel Gimpelevich
63e4f9d270
Now allows compiling tuntap on MacOSX.
...
Couldn't configure the interface to work, though.
2004-01-17 11:47:12 +00:00
Daniel Gimpelevich
d0dae6dae1
Applied Russ Cox's tuntap patch and updated docs.
2004-01-17 02:13:37 +00:00
Volker Ruppert
3b17e2daa0
- the console beep currently works on Linux only and cannot be a plugin yet
...
- Bochs license and RCS ID added
2004-01-16 18:18:38 +00:00
Daniel Gimpelevich
6708807b38
Applied SF patch #694889 .
2004-01-16 16:30:46 +00:00
Daniel Gimpelevich
9915fca4e9
Applied SF patch #874816 .
2004-01-16 15:53:44 +00:00
Daniel Gimpelevich
b84ad185f5
Updated to 2003-11-27.
2004-01-16 15:15:49 +00:00
Daniel Gimpelevich
873651063e
Added support for Virtual Distributed Ethernet.
2004-01-16 14:44:38 +00:00
Daniel Gimpelevich
96142f8465
Fixed DLL-related crash.
2004-01-15 18:00:36 +00:00
Daniel Gimpelevich
6c26e6a65f
Introduced Frank Cornelis's PCIDEV patch.
2004-01-15 02:08:37 +00:00
Michael Brown
299947f64f
Added the PCI Pseudo-NIC (pnic). Mainly useful for running Etherboot
...
inside Bochs.
2004-01-13 19:21:21 +00:00
Volker Ruppert
2127a3925b
- re-implemented old VBE interface for backward compatibility (USB must be disabled)
2003-12-31 10:33:27 +00:00
Christophe Bothamy
37d62ebd90
- add temporary hack for compiling with visual c++
2003-12-29 21:48:56 +00:00
Volker Ruppert
154d9c3bea
- divider chain reset implemented (fixes bug #865354 )
2003-12-27 13:43:41 +00:00
Volker Ruppert
fc1abe8423
- gameport support is now disabled by default. It can be enabled with --enable-sb16=...
...
or the new option --enable-gameport.
- reading gameport with joystick not present now causes a BX_DEBUG message
2003-12-26 14:15:43 +00:00
Volker Ruppert
6ba47a1d7a
- gameport support is now disabled by default. It can be enabled with --enable-sb16=...
...
or the new option --enable-gameport.
- reading gameport with joystick not present now causes a BX_DEBUG message
2003-12-26 13:53:40 +00:00
Volker Ruppert
e8fcb2dd36
- unlike the OPL2, the OPL3 does not set bit 1 and 2 in the status register
...
- the OPL3 mode can only be enabled with command 05h sent to the second OPL chip
2003-12-26 10:06:57 +00:00
Volker Ruppert
b7767cc6ee
- DCR loopback bit fixed: bit 3 clear means loopback mode, so subtracting 8 was
...
wrong. Now the bits are working right, but loopback is still not present.
- loopback should be active if DCR is in loopback mode and TCR loop mode is > 0
- reading the FIFO is only valid in loopback mode (causes a BX_ERROR for now)
2003-12-25 16:58:17 +00:00
Volker Ruppert
815a083f86
- special rule for the gameport plugin on win32 added
2003-12-21 22:36:37 +00:00
Volker Ruppert
f0b06b6da8
- real gameport access implemented for the win32 platform
2003-12-21 17:24:45 +00:00
Volker Ruppert
e7879f6c73
- mixer register behaviour fixes (old registers are bitmapped to the ones)
...
- mixer reset sets default values
- mixer log messages fixed and improved
2003-12-20 17:04:08 +00:00
Volker Ruppert
f731c1774c
- DEV_set_media_status() not necessary in gui floppy handlers when using the
...
win32 floppy dialog
- report geometry with BX_INFO after inserting new floppy media
2003-12-18 20:04:49 +00:00
Volker Ruppert
0569c80236
- initialize structure 'stat_buf' if using raw device access on win32 (grabbed
...
from bug report #857235 )
2003-12-10 22:14:01 +00:00
Daniel Gimpelevich
854f360f9f
Partially applied patches 856506 and 856510.
2003-12-08 23:49:48 +00:00
Daniel Gimpelevich
878134572a
Applied patch to remove 0xfff0 legacy port.
2003-12-08 19:36:23 +00:00
Volker Ruppert
a0b896dc22
- determine media geometry on Linux and win32 host
2003-12-07 15:59:32 +00:00
Volker Ruppert
6113bf4d89
- evaluate_media(): code for character or block devices simplified (TODO: determine
...
media size)
2003-12-06 13:59:30 +00:00
Volker Ruppert
df8604baee
- applied patch #850236 : fixed direct device access to DVD's on win32
2003-11-30 20:54:42 +00:00
Daniel Gimpelevich
fff74a6f83
Fixed incompatibility with gcc3.3, I think.
2003-11-28 15:07:29 +00:00
Christophe Bothamy
0d281a9cca
- initialize ata controller state even if master/slave device is not
...
present. This would prevent the simulation from running on windows
if no slave device was present on the ata0 interface.
2003-11-25 23:00:06 +00:00
Volker Ruppert
335507ac38
- evaluate_media(): floppy type handling for images rewritten. The function now
...
fails if the image size is too large for the selected type.
- evaluate_media(): enclose path names in single quotes in BX_INFOs
2003-11-23 21:54:59 +00:00
Volker Ruppert
e827d430f2
- don't try to insert the floppy media if the path name is "none"
...
- evaluate_media(): new variable 'raw_floppy' indicates raw floppy access on win32
- evaluate_media(): try to read the first sector determine the presence of the
floppy media (raw access on win32)
2003-11-22 18:22:45 +00:00
Volker Ruppert
c1989c68da
- removed unused stuff
2003-11-16 08:21:10 +00:00
Volker Ruppert
5cd8ea6be1
- split the fprintf() call in the writelog() function. This is a workaround for
...
a bug in cygwin and mingw/msys (loglevel was always 0)
- DSP test register implemented
2003-11-15 14:56:30 +00:00
Volker Ruppert
31fcbd1bad
- DSP command 0xE0 returns bitwise NOT of data byte
...
- SB16 returns DSP version 4.05 (4.11 is SB16 SCSI-2)
2003-11-14 19:00:32 +00:00
Volker Ruppert
7e19d19b54
- don't panic at controller command 0xa0 (keyboard BIOS name)
2003-11-11 18:18:36 +00:00
Volker Ruppert
6866ca21d6
- serial FIFO support (UART type 16550A) implemented
2003-11-09 00:14:43 +00:00