- Added new PCI chipset choice for the i440BX AGPset. Some basic work is done,
but AGP support is not present yet.
- Added new class for the "virtual" PCI-to-PCI bridge that should manage the
secondary bus (AGP). Since this device must appear with device number #1 at
the primary bus, it was required to change the PCI device numbers for the
i440BX case. Moved the PIIX4 module to device number #7. The presence of the
PCI base address regions now depends on the header type as expected.
- Since the Bochs BIOS cannot handle the modified PCI device layout, all tests
continued with an external BIOS designed for this chipset (GA-6BA_F1.bin).
This BIOS requires additional changes in some devices.
- ACPI: Return value 0 for some status registers and the GPI registers.
- CMOS: Since the PIIX4 supports a 256 byte CMOS RAM, prepared support for it
and enable it in case a 256 byte CMOS image is used.
- PCI: The device numbers for 4 slots starting at #8. The 5th slot could be
used for AGP when available.
- Screen-to-screen blt: added support for expanding monochrome source data.
- Fixed calculation of the pitch for packed source data.
- Fixed repeated execution of some commands in non-immediate mode.
- PCI devices: fixed and improved BX_INFO / BX_DEBUG messages.
- Added INT pin init to method init_pci_conf().
- Moved readonly register handling to the common PCI write handler.
- Moved IRQ line reporting to the common PCI write handler.
- Added new structure bx_pci_bar_t that contains all parameters related to the
PCI BARs (type, size, address and r/w handlers).
- Added new methods init_bar_io() and init_bar_mem() to set up the new structure
in the pci device init code.
- Added new method pci_write_handler_common() to handle writes to the normal
BARs and the ROM BAR. Writes to other registers are forwarded to the device
specific PCI write handlers. Removed BAR and ROM BAR handling from the
specific code.
- Added new method pci_bar_change_notify() to execute specific code after BAR
update (vga, ne2k).
- Moved normal BAR handling to method after_restore_pci_state().
- Store pointer to PCI device name in bx_pci_device_c and use it for i/o setup.
- Treat VGA extension name other than "none", "vbe" or "cirrus" as a VGA
compatible device plugin and try to load it.
- Added new plugin type PLUGTYPE_VGA for such a plugins (interally handled like
a core plugin).
- Added panic in devices init for the case no VGA compatible plugin is present.
- Added new method vga_redraw_area() that handles the non-VGA and null size
case. The specific method redraw_area() is called otherwise.
- Moved init_systemtimer() call from extension code to init_standard_vga().
- TODO: Implement VGA subsystem in the Voodoo code to test the new feature.
Voodoo Banshee 2D accelerator code needs to be written to make this really
useful.
- Added support for setting memory write handler to NULL (ROM case).
- Added new PCI device method after_restore_pci_state(). It currently handles
the PCI ROM case only (could be extended).
- Removed "pseudo device plugin" containing common code and all connectable
USB devices.
- Moved USB device base class and module handling to the Bochs core.
Now loading USB device plugins in usb_common.cc.
- Created separate plugins for each USB device implementation.
- Modified Bochs plugin system to support new plugin type PLUGTYPE_USBDEV.
- Added entries for the non-plugin case similar to the network and sound stuff.
- Store the Voodoo model in structure bx_voodoo_t.
- The PCI initEnable register of the Voodoo2 model has a read-only secondary
revision ID in bits 12..15. Now the Voodoo2 is correctly detected by the
Windows driver, but display is not yet working (blank screen).
- Reset now disables VGA override.
- PCI: Moved PCI device base class methods to the end of file devices.cc and
re-define LOG_THIS to use the correct log module and prefix.
- Created framework based on our I/O APIC code and ported HPET core from Qemu
with some required changes for the Bochs timer and IRQ handling.
- Enabled HPET-specific code in the ACPI and rombios32 sources and generated
new ACPI table with iasl.
- The HPET device plugin is now always loaded if the i440FX chipset is selected
(same as ACPI). We have to rethink this when we have implemented a more
modern chipset.
- TODO: Rewrite of the virtual timer code for nanosecond support to make the
realtime synchronization possible with HPET.
directly sent to the optional keyboard (USB keypad). It is now independent
from the legacy keyboard and the check for supported keys is simplified. The
legacy keyboard still receives the unhandled key event, but now sent from the
common devices code.
bx_devmodel_c. The early version of the combined vga / svga_cirrus code
required the now obsolete implementation. Some related cleanups in the
devices code.
- Since the pci_read_handler() method is identical in most devices, move it
to the base class to reduce code duplication. Only the 'pcidev' device has
it's own implementation (NOTE: it is not maintained yet).
- Minor other fixes and cleanups in some PCI devices.
- Removed "pseudo device plugin" containing common code and specific drivers.
- Moved network module base classes and module handling to the Bochs core.
Now loading network driver plugins in netmod.cc.
- Moved shared networking code used by the 'vnet' driver and 'bxhub' from
netmod.cc/.h to new files netutil.cc/.h.
- Created separate plugins for each network driver implementation.
- Modified Bochs plugin system to support new plugin type PLUGTYPE_NETWORK.
- Renamed OSS sound driver files from soundlnx.cc/.h to soundoss.cc/.h.
- Removed "pseudo device plugin" containing common code and specific drivers.
- Moved common sound code, base classes of sound drivers and the dummy driver
to the Bochs core. Now loading sound driver plugins in soundmod.cc.
- Created separate plugins for the platform/library specific drivers and the
"file" driver.
- Modified Bochs plugin system to support now plugin type PLUGTYPE_SOUND.
Prepared "biosdetect" option in the harddrv code.
TODO #1: Add support for a comma-separated list of BIOS options.
TODO #2: Implement support for at least "biosdetect=none" in the Bochs BIOS.
almost implemented, the port owner handling and the UHCI companion controllers
are present. High speed devices are not yet supported, since the EHCI scheduler
code has not been written yet (e.g. porting from Qemu). Low and full speed
devices should be detected correctly and work after port ownership change to
UHCI. 6 ports are available and the bochsrc syntax is similar to other HCs.
- added 'sound' option to select the driver and the wave output device
(see bochsrc sample for details)
- the wave device option of sb16 and es1370 is now only used to set up the
wave input device (if necessary)
- cleaned up the speaker code to initialize the 'sound' case correctly
- renamed config parameter "i440fx_support" to "enabled"
- new config parameter "chipset" added (current choices "i430FX" and "i440FX")
- don't load ACPI support if the i430FX chipset is selected
- select register values for the core PCI devices depending on the chipset
- USB UHCI must be connected to a PCI slot if the i430FX chipset is used
- rombios changes to make the i430FX chipset work
- TODO #1: implement limitation to 1 cpu and 128 MB RAM for the i430FX chipset
- TODO #2: verify register behaviour of both chipsets
- read PCI confAddr value from the devices code for debugger output
- PCI confData value isn't needed at all (changes by each read / write access)
- PCI framework methods don't need to be virtual
- PCI slot configuration, memory and i/o BAR registration, PCI i/o space
handlers now present in devices.cc
- configure: E1000 emulation and USB support need PCI
- vga: fixes for the non-PCI case
- uninstall parameter handlers (floppy, keyboard)
- unload plugin that cannot be removed automatically
- wx: removed "show keyboard" demo and some other cleanups
- TODO: remove wx debugger and make wx work with the enhanced gui debugger
- new gui method set_mouse_mode_absxy() should switch the gui to absolute
x/y mode
- new DEV_mouse_motion() argument 'absxy' indicates whether or not the gui
sends absolute x/y values
- USB tablet code prepared to use the new feature
- TODO: implement this feature for each gui (sdl, win32, wx, x, ...)
- ne2k: replaced debugger command 'info ne2k' completely by a new version based
on 'info device' with additional arguments and removed all of the now obsolete
stuff (ne2k device stub, macro for print_info())
- pci: added option 'dump=full' for the debugger command 'info device' to show
the whole PCI config space
- TODO: some other devices could have support for additional options in
debug_dump()
