be specified as a USB port option (e.g. 'sect_size:1024'). The values 512, 1024
and 4096 are supported. If not specified, it defaults to 512.
TODO: ATA disk (harddrv code), BIOS, bximage.
- Added new PCI chipset choice for the i440BX AGPset. Some basic work is done,
but AGP support is not present yet.
- Added new class for the "virtual" PCI-to-PCI bridge that should manage the
secondary bus (AGP). Since this device must appear with device number #1 at
the primary bus, it was required to change the PCI device numbers for the
i440BX case. Moved the PIIX4 module to device number #7. The presence of the
PCI base address regions now depends on the header type as expected.
- Since the Bochs BIOS cannot handle the modified PCI device layout, all tests
continued with an external BIOS designed for this chipset (GA-6BA_F1.bin).
This BIOS requires additional changes in some devices.
- ACPI: Return value 0 for some status registers and the GPI registers.
- CMOS: Since the PIIX4 supports a 256 byte CMOS RAM, prepared support for it
and enable it in case a 256 byte CMOS image is used.
- PCI: The device numbers for 4 slots starting at #8. The 5th slot could be
used for AGP when available.
- Added INT pin init to method init_pci_conf().
- Moved readonly register handling to the common PCI write handler.
- Moved IRQ line reporting to the common PCI write handler.
- Added new structure bx_pci_bar_t that contains all parameters related to the
PCI BARs (type, size, address and r/w handlers).
- Added new methods init_bar_io() and init_bar_mem() to set up the new structure
in the pci device init code.
- Added new method pci_write_handler_common() to handle writes to the normal
BARs and the ROM BAR. Writes to other registers are forwarded to the device
specific PCI write handlers. Removed BAR and ROM BAR handling from the
specific code.
- Added new method pci_bar_change_notify() to execute specific code after BAR
update (vga, ne2k).
- Moved normal BAR handling to method after_restore_pci_state().
- Store pointer to PCI device name in bx_pci_device_c and use it for i/o setup.
- usb_msd.cc: The Device Qualifier is valid for high speed devices only.
- uhci_core.cc: Don't report BX_DEBUG message if the current TD belongs to an
async operation that is still not complete.
- usb_common: init_device() now splits device name and primary option before
detecting device type.
- usb_hub: now completely handle port option in constructor.
- plugin.h: removed obsolete defines.
- Removed "pseudo device plugin" containing common code and all connectable
USB devices.
- Moved USB device base class and module handling to the Bochs core.
Now loading USB device plugins in usb_common.cc.
- Created separate plugins for each USB device implementation.
- Modified Bochs plugin system to support new plugin type PLUGTYPE_USBDEV.
- Added entries for the non-plugin case similar to the network and sound stuff.
directly sent to the optional keyboard (USB keypad). It is now independent
from the legacy keyboard and the check for supported keys is simplified. The
legacy keyboard still receives the unhandled key event, but now sent from the
common devices code.
bx_devmodel_c. The early version of the combined vga / svga_cirrus code
required the now obsolete implementation. Some related cleanups in the
devices code.
- Since the pci_read_handler() method is identical in most devices, move it
to the base class to reduce code duplication. Only the 'pcidev' device has
it's own implementation (NOTE: it is not maintained yet).
- Minor other fixes and cleanups in some PCI devices.
- The retry timer now calls process_transfer_ring() for enabled slots only.
- On USB3-only ports ignore device speed setup and try to enable super-speed mode.
- Added support for HID devices in high-speed mode.
- Added separate descriptors for MSD devices in high-speed mode.
- NOTE: USB 2.0 values ported from Qemu / tested with USB EHCI.
async mode by default for all USB devices (used by disk, cdrom and floppy).
Whenever we implement a new HC model, it is still possible to set the async mode
to 0 until the async packet completion is working correctly.
- Extended USB callback definition to support different event types sent from
device to HC. Currently we only have the two events "async completion" and
"remote wakeup".
- Implemented event handlers in the UHCI, OHCI and EHCI. For the EHCI version
we currently have no test case.
- The external USB hub now uses this feature at device connect/disconnect.
Now the device change on the hub is correctly detected by the guest OS.
- TODO #1: remote wakeup and async completion for the xHCI.
- TODO #2: event handler for the external hub to make a USB device work on
a chain of hubs.
- TODO #3: the event handler possibly could be used for the packet copy code.
- use get_dwords() and put_dwords() from EHCI sources for reading / writing
xHCI data structures as dword array. This fixes some endianness issues.
- simplified copying data from / to data structures since we can now use the
dword array with the correct byte order directly.
- fixed all remaining "strict-aliasing" GCC warnings.
configuration, get/set status, get descriptor) to the base class to reduce code
duplication. The device calls the common handle_control() method and then it
processes unhandled requests in it's specific code. (similar to Qemu).
