and improved by Christophe Bothamy and Volker Ruppert)
Comment from the author:
Attached is a "patch" file detailing what you need to do
to add USB support (UHCI only for now) to your existing
Bochs (2.0.xx) source code.
I use Win32 and VC++ but the source and modifications
should be platform and compiler independant.
Please let me know if this patch some how breaks the
build process of your compilation (Bochs 2.0.0 or above
only).
I would also like any feedback on how this code works
(or doesn't work) on your platform and within your
images. If you explain in as much detail as you can on
how it did or did not work, I will try to add to the source
to help it work on all platforms and images.
value be the application's directory, no matter where it gets
installed. This is consistent with installing the bioses and
keymaps/* into the same directory as bochs.app.
Authors: Br'fin, Bryce
- for MacOSX/Carbon, if you start the app by double clicking in the finder,
there is no text console. So in logfunctions::fatal(), display the
final message in a Carbon dialog instead of using fprintf.
- in the text-mode config interface, return an error code if the
user tries to use the text menus when there's no text console.
Back in bxmain() this error code causes a panic
"Bochs needed the text console, but it was not usable"
- if a config file was not found, normally we turn off quick start
and drop into the text menus. However in the no-console case the
text menus won't work, so we added a panic: Unable to start Bochs
without a bochsrc.txt and without a text console. This is a much
more useful error than the generic one above.
- removed ensure_text_console() which was making matters worse instead
of better.
Modified Files:
logio.cc main.cc gui/siminterface.cc gui/siminterface.h gui/textconfig.cc
completely ignored and Bochs has always been returning 0. Now Bochs should
exit with the proper exit code.
- implementation: BX_EXIT(exitcode) calls SIM->quit_sim(exitcode).
quit_sim stores the exit code in the SIM object, then uses longjmp
to unwind the stack and return to main(). main() calls
SIM->get_exit_code() to retrieve the exit code and returns it.
- If you are wondering why we don't just call exit(exitcode), it is
because in the wxWindows interface all of the CPU simulation runs as one
thread while the user interface runs as another thread. With the longjmp
technique the simulation thread ends cleanly and it is possible to
start a new simulation thread without making a new process.
be used for more things than just the BIOS. Also the keymaps need to
be located relative to the share path, and maybe other things like
graphics and icons, later.
eject, insert, eject, etc. several extra times before allowing you to
actually change the CD. The extra insert/eject cycles were coming from the
param handlers for cdrom status and for the cdrom pathname. To fix this, I
changed wxdialog.cc and textconfig.cc to only call set() on parameters if
they are different from the original value. Now it generally does what you
would expect.
- to change physical CD: change the Bochs CD status to "ejected". On some OSes
that will actually eject it, but on others it will simply close the file so
that the eject button will actually work. Then put the new CD into the
drive, and change the Bochs CD status to "inserted".
Modified Files:
main.cc gui/siminterface.cc gui/siminterface.h
gui/textconfig.cc gui/wxdialog.cc
This fixes bug #614724: SDL can get stuck in full-screen mode, and provides
a framework for fixing the problem on other full-screen display libraries
such as term, svga, etc.
- add virtual method bx_gui::set_display_mode(mode) which can be overridden
by each display library class, if appropriate. This method is primarily
used when you run Bochs full screen, to tell the gui to switch from full
screen back to a mode where you can use the text console.
- There are two display modes: config and simulation. The mode is changed to
config mode during logfunctions::ask, during the runtime configuration menu,
and before displaying a debugger prompt. It is changed back to simulation
mode whenever instructions are running.
- Instead of being called directly through the global bx_gui pointer, the
bx_gui_c::set_display_mode() method is almost always accessed through
siminterface, like this:
SIM->set_display_mode (DISP_MODE_CONFIG);
SIM->set_display_mode (DISP_MODE_SIM);
Of course siminterface just passes the call on to bx_gui::set_display_mode().
I added it to siminterface so that the config interfaces could call it.
(They don't #include bochs.h so they can't access bx_gui.)
Modified Files:
logio.cc main.cc debug/dbg_main.cc gui/gui.h gui/sdl.cc
gui/siminterface.cc gui/siminterface.h
there is one more option in the configuration file "debugger_log"
if the debugger is compiled in, all debugger output will be also
written to this file. Note: wxWindow config interface is not updated yet
- removed the code for changing the console screen buffer size
- BUG: the gui window receives all keypresses from the console when it gets back
the focus. We have eliminate all keypresses before the simulation continues.
Bryce wrote:
This untested patch shows how and where to call RedirectIOToConsole() when
compiling with SDL on win32. I believe this, or something like it, will
fix the problem of having no console window on SDL.
- enable RedirectIOToConsole() when compiling with SDL on win32, so that
it can be called in main().
- move main() down below the definition of RedirectIOToConsole(), and
add a call to RedirectIOToConsole()
- in WinMain, Bochs always asked the user to press ENTER before exiting.
I moved that code to main() with #ifdef WIN32...#endif around it.
(Maybe this should only be done when Bochs explictly creates a console
window, though.)
- if BXBIOS is not defined, set it to a default value that is produced
in the makefile. This allows us to make disk image TAR packages that
look for the bios images in the $BXBIOS directory. These packages
will be able find the current images for future Bochs versions, without
any modifications.
text config interface. This function does not have any contents yet...
the contents need to be filled in for those platforms which sometimes
have no stdin/stdout. The default case, in which stdin/stdout is
usable, is to just return. But if stdin/stdout is NOT usable, this
function should display a warning dialog and quit.
add SVGALIB display library by Igor Popik <igipop@wsfiz.edu.pl>
While it's running, you can press F12 to escape into the runtime config
menu, and then you can change disks or quit or whatever.
Better not try it with the bochs debugger...you could get stuck.
Modified Files:
Makefile.in config.h.in configure configure.in main.cc
plugin.h gui/Makefile.in
Added Files:
gui/svga.cc
Removed Files:
patches/patch.svgalib-gui patches/patch.svgalib-gui-f12
Before when the debugger was enabled, the update function was called
before hardware init leading to a panic.
Modified Files:
main.cc debug/dbg_main.cc
- configure script adds -DBX_PLUGIN_PATH="${plugdir}" to CFLAGS/CXXFLAGS
in the Makefile.
- in main.cc, if plugins enabled and the environment variable LTDL_LIBRARY_PATH
is not set, then it gets set to the value supplied by BX_PLUGIN_PATH.
Modified Files:
main.cc Makefile.in configure.in config.h.in configure
- argc was returning the wrong number of args. Now I treat null and space
the same way, except that null causes the loop to exit.
- change "extern "C" int WinMain" to "int WINAPI WinMain".
- in WinMain pause for the user to read the screen before making it disappear.
This is very useful when there was an error during startup because otherwise
you can't read it. However we'll probably want to disable it when the
user actually asked for Bochs to quit.
it's easier to find. The other one is for wxWindows on win32 only.
- for wxWindows on win32, I added a function called RedirectIOToConsole() from
an article in the Windows Developers Journal that creates a console window
and sets up stdin,stdout,stderr to operate on the console. This works,
except for a console freezing problem that I described on the mailing list
earlier today.
- Once it is working better, we may want to use the WinMain definition for
other types of compiles on win32, and maybe even for all win32 compiles. In
particular when we compile with SDL we should create a console window too.
- comment out some debug output from the command line parser, add \n's in
a few places. (I'm using stderr instead of BX_PANIC because I don't think
the logging system is ready to be used at this early stage.)
the bochsrc is loaded by default.
- if you asked for quick start, but the config file could not be loaded,
print a warning "Switching off quick start, because no configuration file
was found".
- now the behavior looks like this:
. no command line arg (most common)
-> .bochsrc is loaded
-> if found defaults to "5. Begin simulation"
-> if not found defaults to "2. Read options from..."
. command line arg -q (user want to quick start from .bochsrc)
-> .bochsrc is loaded
-> if found, run the simulation
-> if not found defaults to "2. Read options from..."
. command line arg -f (user specifies which conf file to load)
-> conf file is loaded
-> if found defaults to "5. Begin simulation"
-> if not found, print error message on console:
>>PANIC<< reading from bochsrc2.txt failed
. command line arg -qf (user want to quick start from a conf file)
-> conf file is loaded
-> if found, run the simulation
-> if not found, print error message on console:
>>PANIC<< reading from other failed
. after selection of "2. Read options from..."
-> defaults to "5. Begin simulation"
. if user wants to create a new conf file:
-> run bochs with no args
-> .bochsrc is loaded by default
-> choose 1. Restore factory default configuration
-> default is changed to "3. Edit options"
- See bug #625696 "text config menu: default can be wrong" for
more discussion of this issue.
. if BX_GUI_SIGHANDLER is true and the term gui is selected at run time,
a new global boolean (bx_gui_sighandler) variable is set to true.
Special signal handling is done if bx_gui_sighandler is true.
. if BX_GUI_SIGHANDLER is not true, bx_gui_sighandler is not compiled in.
New behaviour is:
. No command line arg (user want to load or create a new conf file)
-> no .bochsrc is loaded
-> defaults to "2. Read options from..."
. command line arg -q (user want to quick start from .bochsrc)
-> .bochsrc is loaded
-> if found Run the simulation
-> if not found defaults to "2. Read options from..."
. command line arg -f (user want to edit a conf file)
-> conf file is loaded
-> if found defaults to "3. Edit options"
-> if not found defaults to "2. Read options from..."
. command line arg -qf (user want to quick start from a conf file)
-> conf file is loaded
-> if found Run the simulation
-> if not found defaults to "2. Read options from..."
. After selection of "2. Read options from..."
-> defaults to "5. Begin simulation"
- fix "enable-control-panel" behaviour in configure.in.
- check if a romimage was supplied in the conf file.
If not, print a hint about a missing/corrupt conf file.
I hope I did not break anything, notably the Carbon gui
- add a new global struct bx_startup_flags which stores argc,argv and
when necessary, the WinMain arguments hInstance, hPrevInstance, etc.
The new struct is defined in gui/siminterface.h because it is needed in
both the main.cc code and in wxmain.cc and textconfig.cc (which don't
include bochs.h).
- rename main() to bxmain() and create new main() and WinMain().
main() and WinMain() just fill in the bx_startup_flags and then
call bxmain(). Only one is defined at a time, of course.
- so far, WinMain is ONLY used when compiling with wxWindows on win32.
It may be useful in other contexts as well, but I don't want to enable
it in any other situation without some serious testing of different
configurations.
- modified:
main.cc gui/siminterface.cc gui/siminterface.h
gui/textconfig.cc gui/wxmain.cc
a control panel, but now we're calling it a text configuration interface.
Modified:
.bochsrc Makefile.in bochs.h main.cc cpu/Makefile.in
debug/Makefile.in disasm/Makefile.in fpu/Makefile.in
gui/Makefile.in iodev/Makefile.in memory/Makefile.in
- if translation=auto :
. translation=none if cylinders <=1024 and heads <=16
. translation=large if cylinders * heads <= 131072
. transaltion=lba otherwise
- changes default translation value to "auto"
- add example in .bochsrc
"bx_bool" which is always defined as Bit32u on all platforms. In Carbon
specific code, Boolean is still used because the Carbon header files
define it to unsigned char.
- this fixes bug [ 623152 ] MacOSX: Triple Exception Booting win95.
The bug was that some code in Bochs depends on Boolean to be a
32 bit value. (This should be fixed, but I don't know all the places
where it needs to be fixed yet.) Because Carbon defined Boolean as
an unsigned char, Bochs just followed along and used the unsigned char
definition to avoid compile problems. This exposed the dependency
on 32 bit Boolean on MacOS X only and led to major simulation problems,
that could only be reproduced and debugged on that platform.
- On the mailing list we debated whether to make all Booleans into "bool" or
our own type. I chose bx_bool for several reasons.
1. Unlike C++'s bool, we can guarantee that bx_bool is the same size on all
platforms, which makes it much less likely to have more platform-specific
simulation differences in the future. (I spent hours on a borrowed
MacOSX machine chasing bug 618388 before discovering that different sized
Booleans were the problem, and I don't want to repeat that.)
2. We still have at least one dependency on 32 bit Booleans which must be
fixed some time, but I don't want to risk introducing new bugs into the
simulation just before the 2.0 release.
Modified Files:
bochs.h config.h.in gdbstub.cc logio.cc main.cc pc_system.cc
pc_system.h plugin.cc plugin.h bios/rombios.c cpu/apic.cc
cpu/arith16.cc cpu/arith32.cc cpu/arith64.cc cpu/arith8.cc
cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer16.cc cpu/ctrl_xfer32.cc
cpu/ctrl_xfer64.cc cpu/data_xfer16.cc cpu/data_xfer32.cc
cpu/data_xfer64.cc cpu/debugstuff.cc cpu/exception.cc
cpu/fetchdecode.cc cpu/flag_ctrl_pro.cc cpu/init.cc
cpu/io_pro.cc cpu/lazy_flags.cc cpu/lazy_flags.h cpu/mult16.cc
cpu/mult32.cc cpu/mult64.cc cpu/mult8.cc cpu/paging.cc
cpu/proc_ctrl.cc cpu/segment_ctrl_pro.cc cpu/stack_pro.cc
cpu/tasking.cc debug/dbg_main.cc debug/debug.h debug/sim2.cc
disasm/dis_decode.cc disasm/disasm.h doc/docbook/Makefile
docs-html/cosimulation.html fpu/wmFPUemu_glue.cc
gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/gui.cc gui/gui.h
gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc
gui/rfb.cc gui/sdl.cc gui/siminterface.cc gui/siminterface.h
gui/term.cc gui/win32.cc gui/wx.cc gui/wxmain.cc gui/wxmain.h
gui/x.cc instrument/example0/instrument.cc
instrument/example0/instrument.h
instrument/example1/instrument.cc
instrument/example1/instrument.h
instrument/stubs/instrument.cc instrument/stubs/instrument.h
iodev/cdrom.cc iodev/cdrom.h iodev/cdrom_osx.cc iodev/cmos.cc
iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_arpback.cc
iodev/eth_packetmaker.cc iodev/eth_packetmaker.h
iodev/floppy.cc iodev/floppy.h iodev/guest2host.h
iodev/harddrv.cc iodev/harddrv.h iodev/ioapic.cc
iodev/ioapic.h iodev/iodebug.cc iodev/iodev.h
iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.h
iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pic.h
iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h
iodev/sb16.cc iodev/sb16.h iodev/serial.cc iodev/serial.h
iodev/vga.cc iodev/vga.h memory/memory.h memory/misc_mem.cc
empty pathnames, zero cylinders, etc. It doesn't seem fair to allow
people to write out bochsrcs that they cannot read back in without
patching them up by hand!
- in harddrv.cc add the equivalent checks with BX_PANICs so that at least
we don't start simulating with incomplete device configuration.
- make a few error messages more clear
- modified: main.cc iodev/harddrv.cc
constructors around. The min,max that were being passed to the parent
class constructor had junk in them. In config.h.in, I defined the minimum
and maximum values for each integer datatype so now we pass correct
min and max values to the parent class. These replace the BX_MAX_[U]INT
and BX_MIN_[U]INT values.
- modified: main.cc config.h.in gui/siminterface.cc
bx_shadow_num_c able to handle pointers to 64 bit values. This
allows x86-64 and wxWindows to coexist.
- I had a number of duplicate constructors for bx_shadow_num_c,
with an without the description arg. I eliminated the ones
that had no description, and also removed the min/max arg from
all. I still need a bunch of constructors though, for
Bit64u*, Bit64s*, Bit32u*, Bit32s*, Bit16u*, Bit16s*, Bit8u*, Bit8s*.
Having all these constructors allows us to write
new bx_shadow_num (bxid, name, description, &value)
for basically any integer variable. They are all handled by the same class.
- these changes led to minor touchups in cpu/init.cc and iodev/keyboard.cc
- modified:
configure main.cc cpu/init.cc iodev/keyboard.cc
gui/siminterface.cc gui/siminterface.h
different versions of the code for wxWindows and non-wxWindows and the GDB
stub did not accept any command line options at all.
- IMPORTANT CHANGE: the quick start option used to cause two things:
1) read the bochsrc immediately, 2) start simulation immediately without
going into the config interface. This has changed in a subtle way.
Now, we always try to read the bochsrc immediately. Then if the quick
start option is on, we start the simulation immediately.
- add "Restore Factory Default Configuration" in text config menu. It was
already there in wx. Now the default choice is always "5. Begin simulation"
and because the bochsrc is always read now, this works.
- When the user chooses "Read configuration file" from either text mode
or wx interfaces, reset all bochs parameters first, then read in the
new file. This means that every time you read a configuration file
you are starting from a consistent "blank slate".
- move much of the code from bx_do_text_config_interface into bx_init_main
so that wxWindows and non-wxWindows code uses the same logic. There was
only a tiny bit left in bx_do_text_config_interface so I eliminated it.
- move the "help" message into a separate function print_usage()
- detect all flags (cmdline args that start with -) in a loop, instead of
a big if/else. This makes it easy to add others.
- fix problem with Carbon gui, so that -psn arg gets ignored
- print usage if you type -h, --help, or if flags are not recognized
- code that called io->set_log_action (that sets the log action for all
devices) was only called if the configuration interface was on; I'm not
sure why. Now it is called all the time.
- the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit
and main() are very similar. They both call bx_init_siminterface, then
bx_init_main (and quit if it fails), then show the config interface if
quickstart is off, and then simulate.
- modified: main.cc gui/control.cc gui/wxmain.cc
bx_list_c can now be displayed as either a wxStaticBox with the
child parameters inside, or as a wxNotebook with each child
parameter in a separate tab. (The children can also be lists of
course.) The default display is the wxStaticBox type, but if you
set the option bit bx_list_c::USE_TAB_WINDOW in the list,
ParamDialog will use the wxNotebook display instead.
- to get the param trees working, I created a new struct
AddParamContext, which is passed to AddParam(). This struct is
critical when AddParam calls itself recursively to display lists
within lists.
- use the wxNotebook display feature for the ATA0,1,2,3 controller
dialog box. Now instead of being hundreds of pixels tall, it is
reasonable height with three different tabs. This fixed bug
#619074: "wx: ATA interface editor too tall" and was the whole
reason I started messing with this at all.
plus some minor cleanups
- when I added the enum constant bx_list_c::USE_TAB_WINDOW, I also
removed the BX_ prefix from all the other enum constants that are
used in parameter options in siminterface.cc. Since these constants
are enums within a class, there is no possibility of namespace
conflicts so the prefix is not needed.
- added wxADJUST_MINSIZE to all wxChoice controls, since that tells
wxWindows to adjust its size to the length of the longest string.
- instead of calling SetSize or SetSizeHints on every textcontrol with
a hardcoded width, I am using just two wxSize specifications for
everything: either normalTextSize or longTextSize.
- edit names of a few menus and params. For example now instead of
the tab saying "Master ATA device on channel 0" it will say
"First HD/CD on channel 0".
Modified Files:
main.cc gui/control.cc gui/gui.cc gui/siminterface.cc gui/siminterface.h
gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc
Include SDL.h so that the C language prototype can be found. Otherwise
SDL_main() will get its name mangled and not match what the SDL library is
expecting.
restart another one in wxWindows. Fixed that. Also, on restart, the
apic id's left over from the first run were causing panics. Fixed that.
- modified: main.cc cpu/apic.cc cpu/cpu.h cpu/init.cc
- make bx_init_main return -1 if any parse errors occur.
- wxWindows: if bx_init_main returns -1, don't even show the application
window. You'll get an error dialog and then it exits. So far this
only happens if you run with -q and the parse fails.
- non-wxWindows: if bx_init_main returns -1, just exit. So far this
only happens if you run with -q and the parse fails.
- with these changes, handling of bochsrc parse errors seems to work
as you would expect. And it certainly doesn't go into an infinite
recursive loop, as it used to!
- a little more testing and I can close
bug 614175: infinite panic loop if bochsrc buggy
- modified: main.cc gui/siminterface.h gui/wxmain.cc
(0=success, -1=failure). If parse_line_unformatted returns failure, I
stop parsing the bochsrc.
- implement all parsing BX_PANICs with new PARSE_ERR macro, so that we can
easily change the behavior of all parse errors at once. For now, I want
it to BX_PANIC and then return -1 (case panic continues). Eventually I
might turn it into BX_ERROR and return -1.
- Features :
. number of active channels defined at boot-time config
. new options in bochsrc
. up to 8 devices support (disks or cdroms)
. up to 4 cdrom devices can be changed at runtime config
. wxwindows config interface
interface) by using get/set_default_log_action. This has very minimal effect
on the behavior of the text config interface.
- modified: main.cc gui/control.cc
time, so I've tried to improve it. Now the logfunctions class has a
static field default_onoff[] which represents the default actions for
each kind of log message. Default_onoff[] is initialized with static
data so it should be valid by the time it's used. This can be reached by
static accesors logfunctions::set_default_action and
logfunctions::get_default_action. It seemed appropriate to put the defaults
inside the logfunctions class, rather than in bx_options or siminterface.
However, to make them accessible to the config interface, I added similar
methods in siminterface that map to the accessors in logfunctions.
- logio.cc had two different definitions of LOG_THIS for different halves
of the file, which was ugly and confusing. (LOG_THIS is needed for BX_INFO,
BX_DEBUG, etc.) I removed the first definition and fixed the minor compile
problems that ensued. In the initializers for iofunctions, everything
is complicated because of the unpredictable order that constructors get
called. They must use this->log to print things, because genlog hasn't
been initialized yet.
- now if SIM->set_log_action(int mod, int level, int action) is called
with mod<0, it sets the action for all modules/devices instead of just one.
- modified: bochs.h logio.cc main.cc gui/siminterface.cc gui/siminterface.h
delivered to both the GUI and simulator thread, so they both call
bx_signal_handler. This can lead to deadlock as multiple threads enter
BX_PANIC and try to show a dialog box at once. To solve the problem, I made
a function isSimThread() which can be called from anywhere. If the
bx_signal_handler is called from any thread OTHER THAN the simulation thread,
it returns without doing anything. As a result, only one thread is allowed
to enter the signal handler code, and now control-C works correctly.
Bochs to immediately read the bochsrc and start simulating immediately (as
opposed to going into the configuration interface first). Now -q does
the right thing in the wxWindows interface. It behaves as if you selected
Read Configuration and then Simulate:Start.
- modified: main.cc gui/siminterface.cc gui/siminterface.h gui/wxmain.cc
think i is still defined the second time.
- MSVC++: can't use a variable to define another variable's array bounds.
Now I use a #define for the array bounds instead.
to change the enable/disable status of other parameters worked fine for
the text mode interface but poorly for the wxWindows gui. So I
implemented it a different way. Now in every boolean parameter, there is
a field called dependent_list which is a list of parameters which
are enabled/disabled by that boolean. Having this list available
allows both the text mode CI and the wxWindows CI to know which fields
should be enabled and disabled as a result of a boolean changing value.
- I've made this change in many of the parameters, in the init code of
main.cc. When I add a dependent_list, I no longer need the "handler"
so I remove the call to set_handler and the cases in the handler
functions.
- in the process, I also made the serial and parallel port init code
into loops, instead of hardcoded initialization. Now if you change
the number of serial/parallel ports in bochs.h the correct number of
ports will be initialized and the menus will grow/shrink accordingly.
- fixed up a few names to improve the look of ParamDialog generated
dialogs.
access routines in access.cc, completing the upgrade of
those routines. You do need '--enable-guest2host-tlb', before
you get the speedups for now. The guest2host mods seem pretty
solid, though I do need to see what effects the A20 line has
on this cache and the paging TLB in general.
I use setjmp() to save the context just before calling
bx_continue_after_config_interface(). Then, in
bx_real_sim_c:quit_sim, I use longjmp() to jump back to that context.
This happens in main.cc and in gui/wxmain.cc (wxWindows only).
I haven't tested with the debugger yet. Possibly with debugger
the quit longjmp() should jump back to the debugger prompt loop
instead of actually quitting the program.
- clean up BX_ASYNC_EVT_LOG_MSG implementation by creating a different,
synchronous event called BX_SYNC_EVT_LOG_ASK. The async event
could be used to simply tell the CI that an event has occurred,
for example if the user wanted to view the events on screen
(not implemented). The sync event is used when you want the user
to respond before the simulation can continue, such as a for the
"panic=ask" behavior.
- in wxmain.cc, move the updates to the Start,Stop,Pause,Resume menu
items into a separate method simStatusChanged(). This makes the code that
does important stuff more readable.
- remove wxMutexGuiEnter()/Leave() from MyFrame::OnSim2CuiEvent().
This method is an event handler called in the gui thread, so it
already has the gui lock. This call caused thread lock on my linux
box.
bx_do_text_config_interface() to make it clear that it's not used
with wxWindows. Before, it was around only the line of that function that
failed to compile.
the terminology a bit. In particular, the term "gui" has started
to mean different things in different contexts, so I've defined
some more specific names for the parts of the user interface, and
updated comments and some variable names to reflect it. See
siminterface.h for a more complete description of all of these.
VGAW: VGA display window and toolbar buttons, the traditional Bochs
display which is ported to X, win32, MacOS X, etc. Implemented
in gui/gui.* and platform dependent gui/*.cc files.
CI: configuration interface that lets the user change settings such
as floppy disk image, ne2k settings, log options. The CI consists
of two parts: configuration user interface (CUI) which does the
actual rendering to the screen and handles key/mouse/menu events,
and the siminterface object.
CUI: configuration user interface. This handles the user interactions
that allow the user to configure Bochs. To actually change any
values it talks to the siminterface object. One implementation of
the CUI is the text-mode menus in gui/control.cc. Another
implementation is (will be) the wxWindows menus and dialogs in
gui/wxmain.cc.
siminterface: the glue between the CUI and the simulation code,
accessible throughout the code by the global variable
bx_simulator_interface_c *SIM;
Among other things, siminterface methods allow the simulator to ask the
CUI to display things or ask for user input, and allows the CUI
to query and modify variables in the simulation code.
GUI: Literally, "graphical user interface". Until the configuration menus
and wxWindows came along, everyone understood that "gui" referred to the
VGA display window and the toolbar buttons because that's all there
was. Now that we have the wxWindows code, which implements both the VGAW
and the CUI, while all other platforms implement only the VGAW, it's not
so clear. So, I'm trying to use VGAW, CI, and CUI consistently since
they are more specific.
control panel: This has been used as another name for the configuration
interface. "control panel" is also somewhat unspecific and it sounds
like it would be graphical with buttons and sliders, but our text-mode
thing is not graphical at all. I've replaced "control panel" with
"configuration interface" wherever I could find it. In configure script,
the --disable-control-panel option is still supported, but it politely
suggests that you use --disable-config-interface instead.
- clean up comments in siminterface,wx* code
- add comments and examples for bx_param_* and BxEvents
- remove some obsolete stuff: notify_*_args,
bx_simulator_interface_c::[sg]et_enabled() methods
- in siminterface.cc, move a few bx_real_sim_c methods to where they belong,
with the rest of the methods. No changes to the actual methods.
- remove some DOS ^M's which crept in and confused my editor.
