- a few weeks ago I changed the gui code so that it always made a copy
of the clipboard data using new Bit8u[] and passed it into the keyboard
code. But I didn't get the keyboard code quite right, and Christophe
noticed the incorrect malloc that I had forgotten to remove. I changed
it to work as I intended:
1. gui code allocates paste buffer (new), copies clipboard data in
2. gui code passes the buffer to the keyboard code, and forgets about it
3. keyboard code uses the buffer, then frees it when finished (delete)
- modified: iodev/keyboard.h iodev/keyboard.cc
. 4 ata interfaces support
. devices auto-detection
. 16bits/32bits device access
. EDD3.0 support
. ata/atapi layer rewrite
. added verious DEBUG_XXX to debug only parts of the bios, because we're running low on data space in debug mode
. moved ata data at offset 0x121 in EBDA. Previously, data was being overwritten by keyboard.sys
. added jump to [0x40:0x67] after reset if shutdown status is 0x05. Fixes bug [ 601166 ] CMOS Problem @ "0x0F Index 0x05 data"
. DMA controller init on POST entry
configuring for a different machine. This is used to short-circuit
certain sanity checks, such as existence of certain required libraries.
- in --with-wx configuration, when $cross_configure=1, do not abort
configure if library is not found.
- if wxWindows version not found, print "not_found" instead of nothing
From his patch file text:
> This patch adds Promise DC2300 VLB IDE Support.
> You may find msdos and win95 drivers on the net. Look for
> P2300W95.ZIP and DC2300VLBIDEver260b.ZIP.
>
> The good news is that now win95 natively sees my cdrom,
> and that the disks are not in msdos compatibility mode any more.
>
> The bad news is that it works only for the first ata interface.
>
> I tested that patch on msdos and win95 only.
>
> Some info on VLB IDE can be found at http://ryston.cz/petr/vlb/
I got Win95 running with 32-bit paging/filesystem using the
recommended driver and these patches. Since the patches did
such a good job bracketing code modifications with a #define,
they might as well become part of the current CVS code.
use getB_CF() etc. getB_CF() and friends are only for a relatively
small number of cases where a true boolean/binary number (0 or 1) is required
rather than 0 or non-0 as is returned by get_CF().
loadSRegLMNominal() which should be used to load a segment register
in long-mode with nominal values which are compatible with existing
checks and expectations for descriptor cache values.
Fixed 64-bit iret to not do a descriptor fetch if SS selector is null.
Also load SS with loadSRegLMNorminal() in the same case.
was not correct (used == 0, rather than s&0xffc == 0). Also,
with a null SS selector, it was fetching the descriptor anyways.
Put more code inside the if (selector != NULL) clause.
For a temporary measure I added the local INIT_64_DESCRIPTOR
from segment_ctrl_pro.cc, and used it in the case that the
SS selector is null. We need to make a real function which
sets a descriptor in long-mode to nominal values. I'm going
to do that next... I can't stand seeing the current hacks. :^)
section title, and less like the grammar that you're supposed to use.
Someone on irc was confused because it was written in uppercase, but then
bochs did not accept the uppercase ATA0-MASTER parameter.
Fixed/updated/cleaned guest2host TLB speedups for Long mode.
I now can boot the Linux x86-64 kernel to the VFS mount message,
using all the accelerations.
these from interfering from a normal compile here's what I did.
In config.h.in (which will generate config.h after a configure),
I added a #define called KPL64Hacks:
#define KPL64Hacks
*After* running configure, you must set this by hand. It will
default to off, so you won't get my hacks in a normal compile.
This will go away soon. There is also a macro just after that
called BailBigRSP(). You don't need to enabled that, but you
can. In many of the instructions which seemed like they could
be hit by the fetchdecode64() process, but which also touched
EIP/ESP, I inserted a macro. Usually this macro expands to nothing.
If you like, you can enabled it, and it will panic if it finds
the upper bits of RIP/RSP set. This helped me find bugs.
Also, I cleaned up the emulation in ctrl_xfer{8,16,32}.cc.
There were some really old legacy code snippets which directly
accessed operands on the stack with access_linear. Lots of
ugly code instead of just pop_32() etc. Cleaning those up,
minimized the number of instructions which directly manipulate
the stack pointer, which should help in refining 64-bit support.
user can turn on/off use of native host specific inline asm
statements. By default, this option is enabled, so you only
need it to disable inline asms in your compile for now.
Currently only on x86+GCC environments, will inline asm()
statements be used. Eventually, other platforms could specify
some asm()s; probably for endian issues such as byte-swapping
and unaligned memory accesses. On x86, there are some inline
asm()s which do the arithmetic EFLAGS processing so that the
lazy flags handling is somewhat bypassed. Eventually, I'll
add more, at least for the more common instructions. This
adds a little extra performance.
giving it Bit32u pointers. On MacOSX for some reason Boolean is set to
unsigned char instead of unsigned int, so it actually cares that we get the
type right.
- return model=2 so that Linux recognizes the processor as having an APIC.
We don't really know what Hammer returns.
- in SetCR4, allow bits 9 and 10 to be written
- added jump to [0x40:0x67] after reset if shutdown status is 0x05. Fixes bug [ 601166 ] CMOS Problem @ "0x0F Index 0x05 data"
- changed various occurences of "mov ax, #0000" by "xor ax, ax"
- fixed serious bugs in EDD function 0x48
- included Volker's rombios recent changes to PCIBIOS
- initialization of DMA controller on POST entry
The function gets the real time in useconds and puts it in
a Bit64u. This function is defined when:
BX_HAVE_REALTIME_USEC is 1.
Right now, BX_HAVE_REALTIME_USEC is defined to be BX_HAVE_GETTIMEOFDAY
and bx_get_realtime64_usec is defined in terms of gettimeofday().
However, it could be defined in terms of any other method of obtaining
the current time accurate to the usecond. That is why I moved the
function to osdep and added the new define.
the icache pageStamp check too early, before it was known
that the TLB entry would produce a physical address in
range of the normal part of physical memory. PCI accesses
were causing seg faults because of this. I haven't tested
this for PCI.
- Features :
. number of active channels defined at boot-time config
. new options in bochsrc
. up to 8 devices support (disks or cdroms)
. up to 4 cdrom devices can be changed at runtime config
. wxwindows config interface
which says to paste getB_ with flag and then paste with (. It should
be "getB_##flag(void)". Some preprocessors are complaining about pasting
the symbol with the paren.
of (1 & (val32>>N)), and added a getB_?F() accessor for special
cases which need a strict binary value (exactly 0 or 1). Most
code only needed a value for logical comparison. I modified the
special cases which do need a binary number for shifting and
comparison between flags, to use the special getB_?F() accessor.
Cleaned up memory.cc functions a little, now that all accesses
are within a single page.
Fixed a (not very likely encountered) bug in fetchdecode.cc (and
fetchdecode64.cc) where a 2-byte opcode starting with a prefix
starts at the last offset on a page. There were no checks
on the segment overrides for a boundary condition. I added them.
The eflags enhancements added just a tiny bit of performance.
- don't allow MMX on cpu level < 5.
- require FPU support on cpu level >= 55
- don't allow MMX support without FPU support (moved this check from
cpu/i387.h to config.h)
- PacketSetReadTimeout: instead of calling with a very short timeout,
now we call it with -1 which means no timeout.
- Psyon found that Peter Tattam's changes, while necessary for win95, broke
WinNT/2000. So now on Windows NT/2000, we still call
WaitForSingleObject(lpAdapter->ReadEvent,0) but we ignore the return value.
parameter values associated with the dialog and updated the wxWindows
controls. At the time I didn't realize that I was overriding
wxWindow::Refresh() which repaints the window. Later, I renamed the method
to CopyParamToGui() to make it more clear, but many of the callers in
wxmain.cc continued to call Refresh(), which now reverted to the parent class
wxWindow::Refresh(). Since there was no compile error I didn't notice for a
while, but it caused the ParamDialogs to repaint themselves constantly but
never actually change their values. This is now fixed by changing those
method calls to CopyParamToGui().
started using a wxTimer to trigger the redraws. Now instead of calling
MyPanel::OnPaint directly, I call Refresh() instead. This makes the Windows
display work correctly.
I'm not sure why this wasn't needed before, but after switching to
wxWindows 2.3.3 it seems to be important.
- in a wxLogDebug() call I was trying to pass a struct instead of a string.
Fixed that.
- hardcode BX_HAVE_GETTIMEOFDAY=0 if cross compiling for VC++
(this part hasn't been tested)
- modified files: configure configure.in config.h.in iodev/pit_wrap.cc
so frequently.
Coded asm() statements for INC/DEC_ERX() instructions.
Cleaned up the iCache a litle including a bug fix. The
generation ID was decrementing the whole field including
some high meta bits. That could roll over after 1 Billion
cycles. I know only decrement if the field is valid, to
save the write.
I implemented inline functions which can serve the value of
the arithmetic flags if they are cached, and redirect to
the lazy_flags.cc routines if not.
Most of this was just prep work for adding more asm() statements
for native eflags processing when on x86.
'char_changed'. These variables are currently only used by the win32 gui for
the update of the font bitmaps. SDL and wxWindows do not use the variables
since they are using the charmap data directly
- free text snapshot memory when the user has cancelled the dialog
- write text snapshot file in binary mode (disables the LF -> CRLF conversion
in cygwin)
- pci2isa prefix changed to "P2I"
- device name changed to "PIIX3 PCI-to-ISA bridge"
- added more default values to the reset() function
- added stubs for i/o mapped registers
- array pci_conf[] is now a part of the structure s
a precursor to making it a runtime option. I'm not
sure how to do this, but it should be trivial. All it
would take is adding the option and changing the
macro for BX_USE_REALTIME_PIT to point to that option.
also extended by the REX.B field on Hammer) is passed to instructions.
I rearranged the bxInstruction_c to free up a field to be used
to pass this info when mod-rm bytes are not used. This got rid
of the ugly ((i->b1 & 7) + i->rex_b) code.
Probably shaved just a very little run time off Hammer emulation,
and even less on x86-32. The resultant is a little cleaner anyways.
and I could never explain it. The problem was that in keyboard.cc it
included "math.h" with quotes instead of <math.h> with less than/greater
than, so gcc -MM didn't realize it was a system header.
- MyPanel::blankCursor
- MyFrame::panel
- AdvancedLogOptions::action (2d array of wxChoice *'s)
- ParamDialog::idHash, ParamDialog::paramHash, and ParamStructs
- file dialog in BrowseTextCtrl
- fix illegal use of a wxObject. I had been clearing the ParamStruct
with memset(), but I forgot that ParamStruct was a subclass of wxObject
so I was trashing the wxObject fields too! Instead I created a
ParamStruct constructor that clears the pointers to NULL.
- comment out debug output from AdvancedLogOptionsDialog::SetAction
- modified files: gui/wx.cc gui/wxdialog.cc gui/wxdialog.h
gui/wxmain.cc gui/wxmain.h
- put off some log related features until later
- advanced log options and debug log are done, so I removed them from the list
- added some wxWindows coding hints I found on usenet
interface) by using get/set_default_log_action. This has very minimal effect
on the behavior of the text config interface.
- modified: main.cc gui/control.cc
time, so I've tried to improve it. Now the logfunctions class has a
static field default_onoff[] which represents the default actions for
each kind of log message. Default_onoff[] is initialized with static
data so it should be valid by the time it's used. This can be reached by
static accesors logfunctions::set_default_action and
logfunctions::get_default_action. It seemed appropriate to put the defaults
inside the logfunctions class, rather than in bx_options or siminterface.
However, to make them accessible to the config interface, I added similar
methods in siminterface that map to the accessors in logfunctions.
- logio.cc had two different definitions of LOG_THIS for different halves
of the file, which was ugly and confusing. (LOG_THIS is needed for BX_INFO,
BX_DEBUG, etc.) I removed the first definition and fixed the minor compile
problems that ensued. In the initializers for iofunctions, everything
is complicated because of the unpredictable order that constructors get
called. They must use this->log to print things, because genlog hasn't
been initialized yet.
- now if SIM->set_log_action(int mod, int level, int action) is called
with mod<0, it sets the action for all modules/devices instead of just one.
- modified: bochs.h logio.cc main.cc gui/siminterface.cc gui/siminterface.h
- LogOptionsDialog: show the "no change" option. When options other than
"no change" are selected, set both the default log action and the
specific log action for all devices.
- AdvancedLogOptionsDialog: store the wxChoice*'s in a 2d array since I
have to refer to them later.
- since both the log options and advanced log options dialogs needed to
create many wxChoices using similar rules, I moved the creation code
into a utility function makeLogOptionChoiceBox.
- I finally discovered the wxADJUST_MINSIZE option to wxSizer::Add(),
which solves some layout problems that I was having with wxChoices.
With this setting, the wxChoice will automatically grow to the size of
the largest string that can be selected.
- improve sizing of the scrollWin according to the desired size of the panel
that contains all the wxChoices.
- add sketches for proposed dialog that combines both LogOptionsDialog and
AdvancedLogOptionsDialog using tabs
From sf patch page :
This patch adds remote GDB stub capability to Bochs.
It's an updated version of the patched bochs 1.3pre1 in
found in this URL:
http://www.rtmk.org/bochs-gdb.html
more details in the same site. thanks Johan Rydberg
in cpu.cc out of the main loop, and into the asynchronous
events handling. I went through all the code paths, and
there doesn't seem to be any reason for that code to be
in the hot loop.
Added another accessor for getting instruction data, called
modC0(). A lot of instructions test whether the mod field
of mod-nnn-rm is 0xc0 or not, ie., it's a register operation
and not memory. So I flag this in fetchdecode{,64}.cc.
This added on the order of 1% performance improvement for
a Win95 boot.
Macroized a few leftover calls to Write_RMV_virtual_xyz()
that didn't get modified in the x86-64 merge. Really, they
just call the real function for now, but I want to have them
available to do direct writes with the guest2host TLB pointers.
but if you hand edit cpu/cpu.h, and change BxICacheEntries,
you can try different sizes. I'll make this more flexible
with configure. For now, use "--enable-icache" with no parameters.
- Modified fetchdecode.cc/fetchdecode64.cc just enough so that
instructions which encode a direct address now use a memory
resolution function which just sticks the immediate address
into rm_addr. With cached instructions we need this.
set_text_charbyte()
- vga: store the address of the active charmap in the new variable
charmap_address
- vga: text mode hack removed. The write modes, operations and masks must be
used in text mode too.
- sdl: clear_screen() is not necessary when the charmap has changed
- win32: update only the changed font bitmaps before drawing the text
- All mouse events in the VGA window go to MyPanel::OnMouse. Middle mouse
button and F12 both toggle mouse capture. OnMouse queues an event
for the simulation thread to process. The simulation thread calls
bx_devices.keyboard->mouse_motion() when it sees the event on the queue.
- add IFDBG_VGA around some display debug code. All wx mouse debug code
is controlled by IFDBG_MOUSE.
- modified: gui/wx.cc gui/wxmain.cc gui/wxmain.h
the wxwindows thread, it just sets a boolean flag needRefresh. Meanwhile, a
wxTimer running in wall clock time (as opposed to sim time) triggers a
repaint only if the the boolean is true.
- now MyRefresh is implemented by just setting needRefresh=true.
- make graphics_tile_update call MyRefresh.
- make dimension_update call MyRefresh.
to bitfields. bxInstruction_c is now 24 bytes, including 4 for
the memory addr resolution function pointer, and 4 for the
execution function pointer (16 + 4 + 4).
Coded more accessors, to abstract access from most code.
with accessors. Had to touch a number of files to update the
access using the new accessors.
Moved rm_addr to the CPU structure, to slim down bxInstruction_c
and to prevent future instruction caching from getting sprayed
with writes to individual rm_addr fields. There only needs to
be one. Though need to deal with instructions which have
static non-modrm addresses, but which are using rm_addr since
that will change.
bxInstruction_c is down to about 40 bytes now. Trying to
get down to 24 bytes.
read all param values from CPU #0. The only solution I can come up with
is to change the siminterface handler function interface to pass a void*
to the callback function. I'll take care of it eventually.
you can switch on and off using the $TEST_* varables at top.
- when running with --parallel, use "-geom +x+y" argument to xterm
to make the windows appear in a regular pattern.
use accessors. This lets me work on compressing the
size of fetch-decode structure (now called bxInstruction_c).
I've reduced it down to about 76 bytes. We should be able
to do much better soon. I needed the abstraction of the
accessors, so I have a lot of freedom to re-arrange things
without making massive future changes.
Lost a few percent of performance in these mods, but my
main focus was to get the abstraction.
I'm keeping a separate patch in case Christophe wants to make revisions
to his patch without my changes getting in the way.
I have just been working on the configuration interface part, for
example making it so that when you disable the ata[0123] channel, all the
devices controlled by that channel will be disabled as well. I haven't
gotten around to the wxWindows part, but these changes will make the
wxWindows work much easier. I will update this patch as my work progresses.
instead of bx_param_bool_c. There are several cases where I need an
enum to enable/disable some fields, and this change should allow
that.
- modified: gui/siminterface.h gui/siminterface.cc
no longer used. Also rearranged that struct a little
to be more compressed. Over time, I'm going to reduce
it further, for use with future accelerations.
enhancement to bochs. You can now configure with
--enable-guest2host-tlb.
Force the support of big pages (PSE) when x86-64 is configured.
Reverted back to only one kind of TLB entry style, since everything
is ported.
Fixed one bug in io.cc with as_64 and the index registers.
There are others, as noticed by Peter.
wxWindows without debugger, I needed to add some more cases of
#if BX_DEBUGGER to make it work. It is certainly possible to
handle such problems by always compiling in the debug dialogs but
only instantiating them if debug support is compiled in, but I have
chosen (for now) to put #if BX_DEBUGGER around things like this.
- modified: gui/wxdialog.h gui/wxdialog.cc
wxWindows without debugger, I needed to add some more cases of #if
BX_DEBUGGER to make it work. All the problems I found were things like
referencing a debug structure which was never initialized (NULL). It is
possible to handle such problems by always compiling in the debug dialogs but
only instantiating them if debug support is compiled in, but I have chosen
(for now) to put #if BX_DEBUGGER around things like this.
class declaration, for example:
static const unsigned os_64=0, as_64=0;
After reading some suggestions on usenet, I changed these into
enums instead, like this:
enum { os_64=0, as_64=0 };
you have AC_DEFINE(var, value) executed more than once, autoconf is
supposed to use the last AC_DEFINE value, but sometimes it doesn't.
I haven't been able to figure out why, so I've just worked around it
instead.
- for BX_SupportGlobalPages, which could call AC_DEFINE twice, I kept the
value in a shell variable $support_global_pages until the end and then
did one AC_DEFINE after it had reached its final value. Same thing
with BX_USE_CONFIG_INTERFACE.
- also I realized that we are using AC_SUBST() in many cases where it is
not needed. AC_SUBST(name) substitutes the string @name@ with a
value from the configure script. For preprocessor symbols like
BX_SupportPAE, we only need the AC_DEFINE; the AC_SUBST has no effect.
be used at all, and Peter didn't want it. "extdb.o" is compiled
into libcpu.a, if configured for it.
Removed a few #warnings for x86-64 compile, based on Peter's
line-item comments regarding the warnings I inserted during
the port/merge.
- try to find the configure script and set the path correctly, in case
the script is run from the main directory, build, etc.
- name the build directories build-$name so they don't overwrite anything.
Now that I have "rm -rf" in my script I wanted to be a little more careful.
printed to stderr in the text debugger. Also allows the user to
type (text) debugger commands directly, which also appear in the log.
- all text output in the debugger now passes through dbg_printf()
(used to be fprintf to stderr) so that in wxWindows I can redirect
it all to the wxWindows debug log screen. Added debug_fputs to
siminterface which actually sends the text to the GUI by creating
a BX_ASYNC_EVT_DBG_MSG event.
- changed prefix and msg fields of BxLogMsgEvent to const char *,
and also in args of logmsg method of siminterface.
- don't trap SIGINT in wxWindows. There are other ways to stop execution.
Also, signal handling with multiple threads is very strange and different
on different platforms.
- minor changes to fix gcc -Wall warnings in dbg_main.cc
- add a new boolean parameter BXP_DEBUG_RUNNING that tells if the debugger is
running freely or not. This is used by the wxWindows GUI to enable or
disable certain choices.
- CpuRegistersDialog has continue,stop,step buttons. When the sim is running
freely, I disable continue and step, and enable stop. When the sim stops
to wait for the user, I disable stop and enable continue and step. The
change of enables used to be triggered by actually pressing the button,
but then if you started/stopped the simulation in some other way (typing
in debug log window) the enables were never changed. Now the enables are
controlled by the value of BXP_DEBUG_RUNNING, which is set by the debug code
itself, and the buttons are enabled at the right time.
- ParamDialog::Refresh() is now virtual so that child classes can redefine
its refresh behavior.
- in safeWxStrcpy, force the last element of the array to be a 0, since
I noticed that strncpy is not guaranteed to terminate the string!
- modified: debug/dbg_main.cc debug/debug.h gui/siminterface.cc
gui/siminterface.h gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc
gui/wxmain.h
printing a message when a reserved bit was set, but not causing
a #GP(0). As well, I force a new PAE support option to 1 when
Hammer support is enabled.
circular dependencies between 3 cpu related libs that I need
as part of this transition. I changed the "ar rv" to "ld -i -o"
to do an incremental load instead of an archive. Hope this
doesn't break any platforms. We can reset this later.
at the appropriate times. For example, you can't stop when you're
stopped. You can't step when it's running.
- modified: gui/wxdialog.cc gui/wxdialog.h
called cpu_mode. Now there is one for cpu32, but it is declared:
static const unsigned cpu_mode=BX_MODE_IA32;
This way the compiler can compile-out if-then-else clauses based
on it, allowing for easier code sharing.
Bochs debugger. The Bochs debugger calls SIM->debug_get_next_command() which
does not return until a debugger command is found. The siminterface sends an
synchronous event to the wxWindows thread with a blank to be filled in with a
debugger command. wxWindows fills in the blank and sends the synchronous
event back, and the Bochs debugger interprets it as if it was typed on
the command line. For the long term I haven't decided whether to stick with
sending text strings vs. some other method.
- so far the wxWindows debugger consists of one big dialog box that shows
all the standard registers, and a working Continue, Stop, and Step button.
- modify ParamDialog so that it is more useful as a base class, by moving
some things to protected members&fields, separating out functionality
that is most likely to be replaced into virtual functions, and making it
generally more flexible. The new CpuRegistersDialog is based on
ParamDialog.
- in wxdialog.cc, continue the convention of using wxID_HELP, wxID_OK,
wxID_CANCEL, etc. for the id's of buttons, instead of wxHELP, wxOK, etc.
which are intended to be ORred together in a bit field.
- cpu/init.cc: put ifdefs around DEFPARAMs for flags in configurations
where they don't exist. Add an eflags shadow parameter that represents all
of the bits of eflags at once. There are also boolean shadow params for
each bit.
- modified files: cpu/init.cc debug/dbg_main.cc debug/debug.h
gui/siminterface.cc gui/siminterface.h gui/wxdialog.cc gui/wxdialog.h
gui/wxmain.cc gui/wxmain.h
member functions are turned on, BX_CPU_C_PREFIX expands to nothing, and any
method that uses BX_CPU_C_PREFIX instead of explictly writing "BX_CPU_C::"
will not be a member function at all. This makes it impossible for code
outside the BX_CPU_C object to call the accessor because sometimes the method
is at ptr_to_cpu->get_EIP() and other times you'd have to do just get_EIP().
The only way I've found to solve this is to remove the BX_CPU_C_PREFIX
and write BX_CPU_C:: instead.
- in debug/dbg_main.cc I removed the EBP, EIP, ESP, SP shortcuts. Now
the accessors are used everywhere. Also I replaced a reference to
the short-lived get_erx() accessor with ones that work: get_EAX(), etc.
- with these changes the current cvs compiles with any combination of
debugger enabled/disabled, SMP enabled/disabled, and x86-64 enabled/disabled.
BX_READ_8BIT_REG() --> BX_READ_8BIT_REGx()
BX_WRITE_8BIT_REG() --> BX_WRITE_8BIT_REGx()
They use an extra parameter "extended". I coded this
as the macro without the "x" for cpu32 compiles. This
allows for ease of merging and code sharing.
to incrementally merge files. For a test, shift16.cc is always
compiled in the cpu/ directory regardless of 32/64-bit configure.
Ultimately, all files will migrate from cpu64 to cpu.
