This fixes zero length packet handling.
See the following example that requests 128 bytes:
```
SETUP(8)
IN(64)
IN(64)
STATUS(0)
```
The current code erroneously assumes that there are no more IN packets
after the first two 64-byte packets.
However, what happens with the following:
```
SETUP(8)
IN(64)
IN(64)
IN(64) <--- current code assumes this will be, and expects a STATUS packet
STATUS(0)
```
Currently, the third IN(64) above will result in a coding error because
the code is expecting the STATUS packet, not another IN packet.
The "controller" must allow for more packets than expected, returning a
short packet detect on the third IN(64) packet shown above, actually
returning zero bytes, hence the Short Packet Detect.
This patch was tested on WinXP, Win7, and Win10.
The check for the amount of byte transferred in one frame time was done
before the update of the vertical pointer in the current Queue of the
last executed TD. Therefore, on the next frame time, the last executed
TD was being "executed" again. The check has now been moved to the top
of the loop.
This adds over-current signaling to the USBs four host controllers.
To signal an OC, use the runtime configuration and set the checkbox (GUI) or text config's parameter to 1.
This pull request also adds USB documentation to user.dbk.
The 'd.pcap_image_t pcapture' in usb_common.h called its constructor and set 'fd' to -1. However, in the usb_device_c() constructor, we then cleared all of 'd', resetting pcapture.fd back to zero. Then on Bochs exit, the pcap_image_t destructor tried to close the file since 'fd' was zero instead of -1. To fix this, I removed the pcap_image_t constructor and now call pcap_image_init() within the usb_device_c constructor.
Added examples for new options.
- xhci: model= option
- xhci: allow the user to select number of ports
- usb disk: proto= option (bbb or uasp)
Added xhci primary stream support.
(Secondary stream support is not included)
Added (experimental) usb disk protocol UASP for super- and high-speed usb disk devices.
(high-speed uasp support is not thoroughly tested)
xhci: fixed "change event" function
scsi: fixed bug in command 0x25
scsi: added command 9E/10
Minor:
Check speed indicator in the Transfer Descriptor matching the device speed.
Max packet size check, checking that the amount requested/sent is within limits.
Checking that the first packet sent is the GetDescriptor Request with a length equal to or less than the max packet size.
Checking the command length in the USB SCSI emulation.
Checking command parameters within various emulations (SCSI (BBB), etc.)
Implemented "Boot Protocol" for the (HID) Mouse emulation.
Fixed wheel mouse HID report (along with the other HID reports)
Added the Over Current bits to the UHCI code
Added the monitoring of the toggle bit in the TDs
Major:
Re-wrote the UHCI stack processing so that control and bulk reclamation can be used.
(This made it so Windows 7 now works)
Adding function to the USB SCSI emulation.
Enhanced the xHCI emulation to further check for errors in a driver.
