Commit Graph

388 Commits

Author SHA1 Message Date
Bryce Denney
3503104390 - configure turns on APIC when cpu level > 5
- now the APIC feature bit is really controlled by cpu level and
  BX_APIC_SUPPORT, so it won't go on at the wrong time.
2001-05-23 15:54:05 +00:00
Bryce Denney
38b35b9a48 - recompiled bios with new features (multiple hd, etc.) 2001-05-23 15:38:26 +00:00
Bryce Denney
892f04a2a3 - replaced all the "fprintf(stderr...); exit(1);" lines with BX_PANIC
and BX_INFO calls instead.
2001-05-23 15:13:05 +00:00
Bryce Denney
db2ae479cc - bug fix: zero length line could cause bochs to segfault. (Maybe it only
happened at the end.)
2001-05-23 15:00:10 +00:00
Todd T.Fries
70099281ff tweaks and if(bx_dbg.foo) BX_INFO -> BX_DEBUG .. 2001-05-23 14:31:21 +00:00
Bryce Denney
d9bcb50f94 - enable split hd support by default 2001-05-23 08:47:03 +00:00
Bryce Denney
9ed3cd690f - avoid "redefined AX" warning 2001-05-23 08:44:59 +00:00
Bryce Denney
6ed99e0e43 - fix typo (beward/beware) 2001-05-23 08:27:10 +00:00
Bryce Denney
d72bdeb7b1 - leave version number unspecified until we are really building a particular
release.
2001-05-23 08:22:23 +00:00
Bryce Denney
e61d00351f - merged BRANCH-smp-bochs into main branch. For details see comments
in BRANCH-smp-bochs revisions.
- The general task was to make multiple CPU's which communicate
  through their APICs.  So instead of BX_CPU and BX_MEM, we now have
  BX_CPU(x) and BX_MEM(y).  For an SMP simulation you have several
  processors in a shared memory space, so there might be processors
  BX_CPU(0..3) but only one memory space BX_MEM(0).  For cosimulation,
  you could have BX_CPU(0) with BX_MEM(0), then BX_CPU(1) with
  BX_MEM(1).  WARNING: Cosimulation is almost certainly broken by the
  SMP changes.
- to simulate multiple CPUs, you have to give each CPU time to execute
  in turn.  This is currently implemented using debugger guards.  The
  cpu loop steps one CPU for a few instructions, then steps the
  next CPU for a few instructions, etc.
- there is some limited support in the debugger for two CPUs, for
  example printing information from each CPU when single stepping.
2001-05-23 08:16:07 +00:00
Bryce Denney
564ca0a857 - within BX_MEM_C member functions, use reference to local data instead of
going out to BX_MEM to get it.
- outside of BX_CPU_C, use BX_CPU(n) instead of BX_CPU_THIS_PTR
- add memory-mapped I/O APIC and local APICs.
2001-05-23 08:02:15 +00:00
Bryce Denney
af4ccaae3e - added I/O APIC and local APICs
- for more details, see BRANCH-smp-bochs
2001-05-23 07:48:11 +00:00
Bryce Denney
17f0f589ba - branch .conf.x86 into .conf.linux-x86 2001-05-23 03:16:34 +00:00
Bryce Denney
68492e6573 - fixed stupid I/O bug 2001-05-23 02:45:43 +00:00
Bryce Denney
7f5f5e24ce - g++ gave warning about "class eth_pktmover_c has virtual functions but
a non-virtual destructor" so I gave it a virtual destructor which is
  empty!
2001-05-23 02:44:52 +00:00
Bryce Denney
42bc8f4f2c - extern not needed anymore 2001-05-23 02:42:55 +00:00
Bryce Denney
2afde23073 - don't print release info for CVS version 2001-05-23 02:40:31 +00:00
Bryce Denney
1981d8d5cd - change name of action "crash" to "fatal"
- change Makefile.in to "cvs-snapshot" information rather than printing
  the release number, since in fact it's not the same as the release anymore
- use #defines to give the actions names (ACT_IGNORE, ACT_REPORT, ACT_FATAL)
- register all logfunctions as they call setio, and keep a list so that
  we can change their settings more easily.  I admit I used a static-sized
  array to store them.  Sorry.
- instead of printing a prefix [GEN ] for generic messages, just leave the
  prefix blank [   ].  Otherwise you start wondering what does gen stand
  for.
- avoid reentry into fatal, since fatal can call BX_INFO and friends.
  This avoids a potential infinite recursion.
- now that files other than .bochsrc can be the rc file, print the
  actual name of the file in error messages.
2001-05-23 02:37:52 +00:00
Todd T.Fries
12457577c1 ne2k from angelos@OpenBSD.org 2001-05-23 00:46:47 +00:00
Bryce Denney
2eafaa4d17 - use MAX_LOGLEV as array bounds for log_actions 2001-05-22 20:02:24 +00:00
Bryce Denney
a04c65e642 - new, partially implemented, lines in .bochsrc allow run-time choice of
what action to take on panic, error, info, and debug.  The lines don't
  have any effect quite yet because of an initialization order problem
  with the logfunctions.
2001-05-22 20:01:40 +00:00
Bryce Denney
cbc8c960d2 - more stderr cleanup 2001-05-22 19:07:53 +00:00
Bryce Denney
3f702247d2 - add version information to the bochs binary for a banner message. 2001-05-22 18:49:11 +00:00
Bryce Denney
d7d75a7bdc - changed some messages from BX_INFO to BX_DEBUG so that they wouldn't
show up by default.
2001-05-22 18:48:31 +00:00
Bryce Denney
36b2a8266b - clean up stderr output a lot
- give hints if they type "bochs" with no args and no .bochsrc is found
2001-05-22 18:47:30 +00:00
Bryce Denney
ed1f0c595d - still content free, but a little more descriptive 2001-05-22 17:46:07 +00:00
Bryce Denney
f089182db8 - add RPM make target 2001-05-22 17:20:45 +00:00
Bryce Denney
195e03130c - make an RPM spec template, with @VERSION@ where the version should go 2001-05-22 16:57:23 +00:00
Bryce Denney
6dc5a16f08 - this is the first rpmspec that actually worked 2001-05-22 16:50:15 +00:00
Bryce Denney
b03c2ef6a6 - add install target to make linux binary release 2001-05-22 16:12:01 +00:00
Bryce Denney
015a541daa - add build subdirectory for platform-specific stuff 2001-05-22 16:10:07 +00:00
Bryce Denney
a477f9bbf7 - I got diffs from 1/4/2000 snapshot to 3/15/2000 snapshot, so I filled
in the changelog.
2001-05-20 04:05:18 +00:00
Bryce Denney
a9b282ece5 - BX_WARN doesn't exist any more! Change them all to BX_INFO. 2001-05-20 03:27:05 +00:00
Bryce Denney
9f5d2075c1 - added missing LOG_THIS 2001-05-20 03:20:11 +00:00
Bryce Denney
dc95af092a - fixed missing close paren in BX_PANIC call 2001-05-20 03:18:10 +00:00
Bryce Denney
c32028ab09 - title of window used to have the old website name in it. 2001-05-18 05:45:01 +00:00
Bryce Denney
f4e8b6c43a - updated form to include v1.1.2 (bugfix3) as an option 2001-05-18 05:39:17 +00:00
Bryce Denney
ee7218cfb5 - in main branch, I moved these contents into CHANGES.txt 2001-05-18 05:36:47 +00:00
Bryce Denney
ece73db2dc - update 5/17 2001-05-17 22:06:39 +00:00
Bryce Denney
7fb2ddca97 - brought in from 1.1 branch 2001-05-17 21:55:42 +00:00
Bryce Denney
267d834580 - switch to new BIOS from 5/17/2001 2001-05-17 21:51:16 +00:00
Bryce Denney
d6bdcc3141 - this bios is from rev1.4 of rombios.c, which fixes
[ #424904 ] rombios bug: both hds claim same geometry
2001-05-17 21:50:02 +00:00
Bryce Denney
fbde69ffcc - fixed bug in int13 code that returned disk0's geometry for either disk.
This fixes [ #424904 ] rombios bug: both hds claim same geom
2001-05-17 21:47:14 +00:00
Bryce Denney
04d661f248 - I grabbed this patch from plex86. It appears to make bochs disks
support LBA.  This builds okay, but I want to find a way to actually see that
  it's making some difference before committing it.  Anyway have an OS or
  diagnostic program that tests if LBA is in use?  What would LBA allow me to
  do that I can't do without it, so that a test can be done?
2001-05-17 21:38:33 +00:00
Bryce Denney
db087c7f6a - try to avoid printing null pointers if midifil, wavefile, logfile
are not defined.  This happens if SB16 is configured but then does
  not appear in the .bochsrc.
2001-05-17 20:58:31 +00:00
Bryce Denney
770cf1e9e2 - changed order of hard drive stuff to make it more clear 2001-05-17 20:11:50 +00:00
Bryce Denney
86182ace3a - added note that you need newharddrivesupport=1 2001-05-17 20:10:41 +00:00
Bryce Denney
784001a79c - made newharddrivesupport on by default. 2001-05-17 20:07:36 +00:00
Bryce Denney
a9ab075cbd - I made newHardDriveSupport on by default 2001-05-17 20:06:31 +00:00
Bryce Denney
aab41a611e - SLDT in real mode produces undefined opcode exception. Changed BX_PANIC
to BX_ERROR under these circumstances.
2001-05-17 20:05:17 +00:00