- Add a special list to the MSD state and add pointers to the runtime-only
options for the cdrom. The restore handler of this list calls runtime_config()
to make sure the media path and status are correctly updated.
- Registering a runtime config handler for the USB cdrom is not necessary since
runtime_config() is always called from the hub it is connected to.
- Restore a string parameter value only if it's different from the initial one.
with devices conected at runtime.
- Added restore handler support for the bx_list_c class. If a handler is
registered, it will be called after restoring all of the list's members.
- USB hub: add special lists to the port state and add pointers to the
runtime-only options for each port. The restore handler of this list calls
init_device() to make sure all connected devices can be restored.
- Call restore_logopts() after restoring hardware to make sure all saved
modules have been created.
- TODO: the USB cdrom also needs a fix for it's runtime-only options.
- Removed USB device type handling from constructor and init code, since we
only the 'floppy' type here.
- Write commands now using the device buffer for one sector.
TODO: support for starting without media and runtime media change.
- The read buffer is now limited to 16 sectors and the read commands can fill
it multiple times until all sectors have been read.
- The write commands are currently not using the device buffer, so no panic
should happen here.
- bx_param_num_c: set the value returned from the handler.
- bx_param_string_c: set the new value after processing the handler.
- harddrv param handler: check lock state of cdrom and modify value if true.
- Force a status bar update after unregistering an item.
- Added status indicators for USB disk and cdrom.
- Handle USB device disconnect in the runtime config handler, too.
devices like USB disk, cdrom or floppy. Using this feature for the new USB
floppy. Removed static indicators for port activity from the USB HC code.
TODO: Implement status LEDs for USB disk and cdrom.
by Ben Lunt. To connect a USB floppy you can use the 'floppy' device with the
path to the image separated with a colon. VVFAT is also supported.
FIXME: The device detection fails on some recent Linux distributions.
FIXME: Only 1.44M media format is currently supported.
TODO: Media change without disconnect is not implemented yet.
sendwavepacket() directly calls the conversion method and output(). In all other
cases it puts the unmodified data into a buffer and the conversion thread is
doing the main job and puts the data into the output buffer chain.
TODO: resampling could also be done by the new thread.
- The 'Bits' type used in the opl files is incompatible with Bit64s. Modified
typedef to fix this issue.
- On Windows use Sleep() directly, since msleep() doesn't exist in Cygwin.
USB UHCI and the E1000 NIC are known to work fine on some guest systems, so
it's safe to remove this attribute.
TODO: Some other Bochs features need to be reviewed for this.
- the "remaplist" has 256 entries, but the limit was too high (4096).
- the "patchtable" had 4096 entries, but the index was never > 15.
- removed disabled / outdated code.
- Undocumented "legacy" register at offset 0x1b is used to probe for the ES1370
interrupt by the Win9x driver. Using bit #0 to control the IRQ line fixes
driver installation.
- Added more detailed BX_ERROR messages for the UART registers.
- Small code cleanup in the write handler.
- TODO: fix possible bluescreen in Win98 guest after wave playback.
- OPL3: apply FM volume control to the output data.
- SB16: fixed missing volume update after mixer reset.
- soundlow: fixed application of the volume control to the PCM output.
- Removed useless set_pcm_params() call in base class contructor.
- SDL waveout destructor needs to call the unregister_wave_callback() method
of the SDL stuff, since the base class destructor doesn't do that.
- Moved BX_INIT_MUTEX() call to start_mixer_thread() to reduce code duplication.
- Call BX_FINI_MUTEX() only when the mixer thread and mutex was really used.
NULL for all services and the dummy driver provides the stubs. Now falling
back to the dummy driver if the wavein or midiout services are not provided
by the selected driver.
- sound 'file' driver: added failure handling in the file open methods.
- soundmod: initialize default driver with NULL to avoid crash on failure.
- SB16: Fixed crash if no driver is present / removed unused members.
- Implemented wave output using the 'soundfile' driver including dual wave
output in wavemode 3. Removed now obsolete output file handling and other
cleanups. The wave input (recording) feature is not affected by the
wavemode setting.
- Moved VOC file handling to the soundfile code.
- Updated iodev makefile dependencies.
- Implemented wave and midi output using the 'soundfile' driver.
- Implemented dual midi/wave output in midimode/wavemode 3.
- Removed now obsolete output file handling and other cleanups.
- The wave input (recording) and OPL3 output features are not affected by
the wavemode setting.
- TODO: Similar rewrite of ES1370 wave output and related cleanups.
- soundlow: use direct output if no PCM callback is registered.
- soundlow/soundfile: re-implemented openwaveoutput() method to support
runtime changes of wave mode or file (only implemented in the 'file'
driver, stub for others).
- soundfile: don't initialize mixer thread and PCM callback if thread is
already running / no output() delay in that case.
- Added the capability to load up to 4 sound drivers and added methods to
get pointers to the waveout, wavein and midiout services of a driver.
- Rewrite of the SB16 midi file output code. In midimode 2 and 3 the midiout
service of the 'file' driver is used. Removed obsolete midi file handling.
- Re-implemented the closemidioutput() method to make runtime changes of the
midi setup work with the new code.
- waveout: added support for RIFF WAVE format and raw output. The formats
'voc' and 'wav' are detected by file extension, raw output is used otherwise.
- midiout: added support for raw midi output (no header, no deltatime).
The 'mid' format is detected by file extension, raw output is used otherwise.
- Added 'midiout' parameter to the global sound option to specify the device
if necessary. The related SB16 parameter now only specifies the output file.
- TODO: Rewrite of the sound configuration and output code to support dual
output (device and file).
- New code is based on the dummy sound driver and file output code from SB16.
- The midiout feature supports the MIDI file format.
- The waveout feature currently only supports the VOC format.
TODO:
- Add support for a more detailed sound configuration (waveout to device,
midiout to a file.
- The waveout feature should support WAV and RAW file formats.
- Move VOC file handling from soundmod.cc to soundfile.cc.
- Finally remove file handling code from sound devices.
creates the object and returns a pointer to it. TODO: Rewrite of the sound
configuration to support a more detailed setup (e.g. waveout with alsa,
dummy wavein, midiout to a file).
creates the object and returns a pointer to it. TODO: The wavein and midiout
components should also move to separate classes. When finished, it should be
possible to configure the sound support more detailed (e.g. waveout with sdl,
midiout with alsa and the dummy driver for wavein). Creating a separate
module for the output to file(s) is also possible.
'alsa'. Cleaned up the code a little bit.
TODO #1: Implement mixer thread support in the OSX sound driver.
TODO #2: Code cleanups in the Bochs sound code.
TODO #3: Resampling support and improvements in the wave recording code.
- removed disabled code for the sndPlaySound() function.
- removed now obsolete buffer ring for wave output.
- The new mothod waveout() is driven by the mixer thread. For the best results
you need to disable the 'realtime' sychronization and to find out a usable
IPS vaöue. The mixer also polls data from the speaker beep generator and
the OPL3 FM generator.
- TODO: Code cleanup in soundwin.cc, implementation in other sound modules.
- soundlow: prepared code for 2 pcm parameter sets:
emulated: requested by sendwavepacket()
real: used for the sound output
- soundsdl: startwaveplayback() rewritten to set_pcm_data().
- soundmod: some beep init code fixes.
- OPL3: Added support to change the samplerate of the generator.
- SDL sound: convert wave packet to 16 Bit signed stereo format.
- Increased the maximum size of a single wave packet for playbck/recording.