reaches a certain maximum length. Otherwise the debug console grows and
grows and never frees any memory. The max length is defined as a constant
in wxdialog.h. The max length should be made into a variable some day.
- This fixes bug [ 624317 ] wx: debug console never discards lines.
Modified Files:
gui/wxdialog.h gui/wxdialog.cc
the first hard drive or first cdrom drive no matter where they are found.
Now the wxWindows interface recognizes this fact. It allows you to
select HD boot if there is a hard drive in any ATA location, and
select CDROM boot if there is a cdrom in any ATA location.
- this fixes bug [ 616139 ] wx: boot hd/cd must be in ata0 interface
Modified Files:
gui/siminterface.cc gui/siminterface.h gui/wxmain.cc
This fixes bug #614724: SDL can get stuck in full-screen mode, and provides
a framework for fixing the problem on other full-screen display libraries
such as term, svga, etc.
- add virtual method bx_gui::set_display_mode(mode) which can be overridden
by each display library class, if appropriate. This method is primarily
used when you run Bochs full screen, to tell the gui to switch from full
screen back to a mode where you can use the text console.
- There are two display modes: config and simulation. The mode is changed to
config mode during logfunctions::ask, during the runtime configuration menu,
and before displaying a debugger prompt. It is changed back to simulation
mode whenever instructions are running.
- Instead of being called directly through the global bx_gui pointer, the
bx_gui_c::set_display_mode() method is almost always accessed through
siminterface, like this:
SIM->set_display_mode (DISP_MODE_CONFIG);
SIM->set_display_mode (DISP_MODE_SIM);
Of course siminterface just passes the call on to bx_gui::set_display_mode().
I added it to siminterface so that the config interfaces could call it.
(They don't #include bochs.h so they can't access bx_gui.)
Modified Files:
logio.cc main.cc debug/dbg_main.cc gui/gui.h gui/sdl.cc
gui/siminterface.cc gui/siminterface.h
there is one more option in the configuration file "debugger_log"
if the debugger is compiled in, all debugger output will be also
written to this file. Note: wxWindow config interface is not updated yet
doesn't get put in the dependency list. It's not clear what is the best way
to handle this header conflict anyway, other than to rename vga.h to bxvga.h
or something.
bochs.h. Bernd Korz reported redefinition of Bit32u in the system header
files, which I never saw before I moved bochs.h up above the other includes.
- The exact errors:
/boot/develop/headers/posix/be_prim.h:23: error: conflicting types for
`typedef long unsigned int Bit32u'
/boot/home/Entwicklung/Sourcecodes/bochs/config.h:474: error: previous
declaration as `typedef unsigned int Bit32u'
add SVGALIB display library by Igor Popik <igipop@wsfiz.edu.pl>
While it's running, you can press F12 to escape into the runtime config
menu, and then you can change disks or quit or whatever.
Better not try it with the bochs debugger...you could get stuck.
Modified Files:
Makefile.in config.h.in configure configure.in main.cc
plugin.h gui/Makefile.in
Added Files:
gui/svga.cc
Removed Files:
patches/patch.svgalib-gui patches/patch.svgalib-gui-f12
to make Bochs compile on DJGPP.
- put references to SIGSTOP and SIGTSTP in #ifdefs
- add definition of BX_CD_FRAMESIZE and CD_FRAMESIZE
- look for curses functions in -ldcurses
Modified Files:
gui/term.cc iodev/cdrom.cc configure.in configure
- The Bochs debugger uses BX_WITH_WX to decide to change to wxWindows debugger
behavior: sending a synchronous message to the config interface to get a new
command, sending all dbg_printf output to the config interface, deciding
whether to trap control-C, etc. But now that it's possible to compile with
BX_WITH_WX and BX_WITH_other_things, this isn't quite right anymore. With
this change, we now use calls to a new method SIM->is_wx_selected() to decide
which behavior to use. This method is equivalent to checking if the display
library variable is set to "wx", but it's implemented in such a way that it
only has to check a boolean for each call to SIM->is_wx_selected().
- in siminterface.cc, init some local variables to 0 to avoid compile
warnings.
Modified Files:
debug/dbg_main.cc gui/siminterface.cc gui/siminterface.h
For a whole lot of configure options, I put #if...#endif around code that
is specific to the option, even in files which are normally only compiled
when the option is on. This allows me to create a MS Visual C++ 6.0
workspace that supports many of these options. The workspace will basically
compile every file all the time, but the code for disabled options will
be commented out by the #if...#endif.
This may one day lead to simplification of the Makefiles and configure
scripts, but for the moment I'm leaving Makefiles and configure scripts
alone.
Affected options:
BX_SUPPORT_APIC (cpu/apic.cc)
BX_SUPPORT_X86_64 (cpu/*64.cc)
BX_DEBUGGER (debug/*)
BX_DISASM (disasm/*)
BX_WITH_nameofgui (gui/*)
BX_SUPPORT_CDROM (iodev/cdrom.cc)
BX_NE2K_SUPPORT (iodev/eth*.cc, iodev/ne2k.cc)
BX_SUPPORT_APIC (iodev/ioapic.cc)
BX_IODEBUG_SUPPORT (iodev/iodebug.cc)
BX_PCI_SUPPORT (iodev/pci*.cc)
BX_SUPPORT_SB16 (iodev/sb*.cc)
Modified Files:
cpu/apic.cc cpu/arith64.cc cpu/ctrl_xfer64.cc
cpu/data_xfer64.cc cpu/fetchdecode64.cc cpu/logical64.cc
cpu/mult64.cc cpu/resolve64.cc cpu/shift64.cc cpu/stack64.cc
debug/Makefile.in debug/crc.cc debug/dbg_main.cc debug/lexer.l
debug/linux.cc debug/parser.c debug/parser.y
disasm/dis_decode.cc disasm/dis_groups.cc gui/amigaos.cc
gui/beos.cc gui/carbon.cc gui/macintosh.cc gui/rfb.cc
gui/sdl.cc gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc
gui/wxmain.cc gui/x.cc iodev/cdrom.cc iodev/eth.cc
iodev/eth_arpback.cc iodev/eth_fbsd.cc iodev/eth_linux.cc
iodev/eth_null.cc iodev/eth_packetmaker.cc iodev/eth_tap.cc
iodev/eth_tuntap.cc iodev/eth_win32.cc iodev/ioapic.cc
iodev/iodebug.cc iodev/ne2k.cc iodev/pci.cc iodev/pci2isa.cc
iodev/sb16.cc iodev/soundlnx.cc iodev/soundwin.cc
- plugins are installed into ${plugdir} which is defined to be
${libdir}/bochs-${VERSION}/plugins.
Modified Files:
Makefile.in plugin.cc configure.in configure gui/Makefile.in
iodev/Makefile.in
. if BX_GUI_SIGHANDLER is true and the term gui is selected at run time,
a new global boolean (bx_gui_sighandler) variable is set to true.
Special signal handling is done if bx_gui_sighandler is true.
. if BX_GUI_SIGHANDLER is not true, bx_gui_sighandler is not compiled in.
New behaviour is:
. No command line arg (user want to load or create a new conf file)
-> no .bochsrc is loaded
-> defaults to "2. Read options from..."
. command line arg -q (user want to quick start from .bochsrc)
-> .bochsrc is loaded
-> if found Run the simulation
-> if not found defaults to "2. Read options from..."
. command line arg -f (user want to edit a conf file)
-> conf file is loaded
-> if found defaults to "3. Edit options"
-> if not found defaults to "2. Read options from..."
. command line arg -qf (user want to quick start from a conf file)
-> conf file is loaded
-> if found Run the simulation
-> if not found defaults to "2. Read options from..."
. After selection of "2. Read options from..."
-> defaults to "5. Begin simulation"
- fix "enable-control-panel" behaviour in configure.in.
- check if a romimage was supplied in the conf file.
If not, print a hint about a missing/corrupt conf file.
I hope I did not break anything, notably the Carbon gui
interface at runtime. The behaviour of the button handlers was wrong if bochs
is configured with plugins and all display libs enabled, wxWindows is present
and a gui using textconfig is selected.
The wx cdrom button still doesn't work since get_first_cdrom() always returns
NULL.
- add a new global struct bx_startup_flags which stores argc,argv and
when necessary, the WinMain arguments hInstance, hPrevInstance, etc.
The new struct is defined in gui/siminterface.h because it is needed in
both the main.cc code and in wxmain.cc and textconfig.cc (which don't
include bochs.h).
- rename main() to bxmain() and create new main() and WinMain().
main() and WinMain() just fill in the bx_startup_flags and then
call bxmain(). Only one is defined at a time, of course.
- so far, WinMain is ONLY used when compiling with wxWindows on win32.
It may be useful in other contexts as well, but I don't want to enable
it in any other situation without some serious testing of different
configurations.
- modified:
main.cc gui/siminterface.cc gui/siminterface.h
gui/textconfig.cc gui/wxmain.cc
a control panel, but now we're calling it a text configuration interface.
Modified:
.bochsrc Makefile.in bochs.h main.cc cpu/Makefile.in
debug/Makefile.in disasm/Makefile.in fpu/Makefile.in
gui/Makefile.in iodev/Makefile.in memory/Makefile.in
