Volker Ruppert
47a9c75235
- some data types changed
2004-03-20 12:42:13 +00:00
Volker Ruppert
33cb0be81f
- log prefix for serial_raw fixed
...
- clear modem lines and break condition in constructor
- clear comm error and close event object after sending data
- ready_receive() now depends on the number of received bytes (receiver thread
not present yet)
2004-03-17 17:08:57 +00:00
Volker Ruppert
8a9b4a1429
- cleaned up rx_timer() (raw serial support doesn't need the select function
2004-03-13 17:17:16 +00:00
Volker Ruppert
222cf871fd
- serial_raw for win32: transmit data implemented
2004-03-12 14:33:22 +00:00
Volker Ruppert
87853190b5
- bit number of the loopback switch fixed
2004-03-09 22:17:33 +00:00
Volker Ruppert
677574bfa8
- break signal handling in loopback mode added
...
- change the raw serial settings when entering or leaving loopback mode
- write handler: new bit values now stored in local variables
- serial_raw: fixed a warning
2004-03-09 21:58:37 +00:00
Volker Ruppert
2243d9a612
- serial_raw: new methods set_modem_control(), get_modem_status() and setup_port()
...
- serial_raw for win32: set/clear break, set modem control and get modem status implemented
2004-03-08 21:51:19 +00:00
Volker Ruppert
5c9c57a60a
- don't enable vbe if already active
...
- value of flag vbe_get_capabilities fixed
2004-03-02 16:29:27 +00:00
Volker Ruppert
7fc70c8327
- fixed compile error in serial destructor
2004-02-28 22:06:36 +00:00
Volker Ruppert
8ba9c91d55
- prepared raw serial support for win32 (DCB settings)
...
- serial_raw: new method set_break()
- delete raw serials object in destructor
2004-02-28 21:28:28 +00:00
Volker Ruppert
9c9aebcf3d
- serial port code now compiles on Linux with USE_RAW_SERIAL = 1
...
- LCR write code rewritten
- only call set_baudrate() when DLAB has changed to 0
2004-02-28 13:10:57 +00:00
Volker Ruppert
7f9edd09c8
- convert the display library option string (options separated with commas) to an
...
array of strings in vga init
- added sdl specific option "fullscreen" (startup in fullscreen mode)
2004-02-24 19:21:48 +00:00
Volker Ruppert
d5f337e1ef
- prepared implementation of display library specific options
...
- fixed bug #890734 (commas in strings enclosed with double quotes)
2004-02-22 18:51:38 +00:00
Volker Ruppert
d748f22ed0
- new gui function get_capabilities() returns the maximum values for xres, yres
...
and bpp (done for the x display library)
- new switch VBE_DISPI_GETCAPS. The xres, yres and bpp registers return the gui
capabilities if enabled.
- VBE_DISPI_ID3 defined
2004-02-22 13:03:02 +00:00
Daniel Gimpelevich
905af2fee2
Fixed softfloat compilation error.
2004-02-18 20:10:19 +00:00
Daniel Gimpelevich
c870561fd5
Fixed xlC compilation error.
2004-02-18 18:54:21 +00:00
Volker Ruppert
b04a62bfda
- fixed libtool compile warnings
2004-02-18 18:24:18 +00:00
Volker Ruppert
5d2376d93d
- 3rd mouse button now supported by the win32 display library
2004-02-15 00:03:16 +00:00
Daniel Gimpelevich
69a6ede259
Fixed Mac conflict with softfloat.
2004-02-14 06:33:29 +00:00
Christophe Bothamy
713db869f6
- implement atapi command 'CD-ROM capabilities & mech. status default values'
...
it helps during OS/2 install from cdrom.
2004-02-13 00:42:31 +00:00
Daniel Gimpelevich
292c271034
PNIC now works with plugins
2004-02-10 23:47:31 +00:00
Daniel Gimpelevich
5366cc369e
Added Brian Huffman's Sound for OSX code with a couple of tweaks.
2004-02-09 22:23:53 +00:00
Volker Ruppert
e7b558894c
- harddisk/cdrom i/o light implemented. The light is turned off 0.5 seconds after
...
the last read/write operation.
2004-02-09 18:59:50 +00:00
Volker Ruppert
d78f3da836
- win32 statusbar now shows active items with light green background
...
- harddisk/cdrom status light feature prepared
2004-02-08 18:38:26 +00:00
Volker Ruppert
107c109d04
- win32 statusbar now shows all inactive items grayed
...
- update floppy items in statusbar on status change only
- initialize statusbar and set all items inactive before the simulation starts
2004-02-08 10:25:50 +00:00
Volker Ruppert
f5c165e32a
- statusbar items for floppy and keyboard added (win32 gui only). TODO: implement
...
statusbar in other display libraries and add items for harddisk/cdrom and network.
2004-02-07 14:34:35 +00:00
Daniel Gimpelevich
126971af49
Made to compile on MacOS9
2004-02-06 22:28:00 +00:00
Volker Ruppert
e379a9c2cc
- speaker stub added (fixes possible segfault if the speaker plugin is not present)
...
- fixed some warnings
2004-02-02 21:47:26 +00:00
Christophe Bothamy
d6fb513243
- changed "console" to "speaker". Speaker can be compiled as plugin.
...
speaker calls corresponding beeper methods in gui.
2004-02-01 23:42:04 +00:00
Michael Brown
b29e94b334
Fixed segfault on attempt to build with PNIC support.
2004-01-29 17:33:45 +00:00
Volker Ruppert
ac28f72551
- multiple parallel port support added (2 ports are available now)
...
- parport irq is now only registered in irq mode
- bx_reset_options() updated for multiple parallel and serial ports
2004-01-27 21:38:51 +00:00
Christophe Bothamy
df2030c60b
- completely desactivate code for compressed hd for now.
...
this fixes bug #883239
2004-01-26 00:55:23 +00:00
Volker Ruppert
b2b9d5bd53
- com port number added to all debug/info/error/panic messages
2004-01-25 13:01:29 +00:00
Volker Ruppert
897695270b
- notify the display library if the bpp value changes (switching from VBE to VGA mode)
2004-01-24 20:50:45 +00:00
Christophe Bothamy
d62e9c7a4c
- fix out of bound index on COW_images array, as suggested by Sharvil Nanavati
2004-01-19 23:25:47 +00:00
Christophe Bothamy
2117cdae7d
- apply patches from Ben Lunt :
...
* do not panic when "calibrate drive" is issued to non disk
* warn that "set tranfert mode" command not supported
2004-01-19 21:48:07 +00:00
Volker Ruppert
c1808b14f4
- allow 16 bit writes to page 0 (patch from Kenneth Stailey)
2004-01-19 17:53:53 +00:00
Christophe Bothamy
3436662995
- fix for vmware3 cow disk on big-endian platforms
2004-01-18 16:39:02 +00:00
Volker Ruppert
264029fdee
- raw serial support prepared for 4 ports
...
- fixes for compiling on win32
- unnecessary includes removed
- description updated
- converted tabs to spaces
2004-01-18 11:58:07 +00:00
Daniel Gimpelevich
f11fdab54b
Added preliminary hack to use TUN mode instead of TAP.
...
Still doesn't work, though.
2004-01-18 06:15:38 +00:00
Volker Ruppert
92c0f1e300
- fixes to make serial_raw stuff compile (still a dummy)
2004-01-18 01:30:14 +00:00
Volker Ruppert
24bee7ee43
- multiple serial port support completed (4 port are available now)
...
- rx_fifo_enq() call fixed
- unnecessary BX_INFO removed
2004-01-18 00:18:44 +00:00
Volker Ruppert
8b640bface
- serial read/write and timer handlers prepared for 4 ports
...
- new function triggeredTimerID() returns the active ID in timer handler
2004-01-17 15:51:09 +00:00
Daniel Gimpelevich
63e4f9d270
Now allows compiling tuntap on MacOSX.
...
Couldn't configure the interface to work, though.
2004-01-17 11:47:12 +00:00
Daniel Gimpelevich
d0dae6dae1
Applied Russ Cox's tuntap patch and updated docs.
2004-01-17 02:13:37 +00:00
Volker Ruppert
3b17e2daa0
- the console beep currently works on Linux only and cannot be a plugin yet
...
- Bochs license and RCS ID added
2004-01-16 18:18:38 +00:00
Daniel Gimpelevich
6708807b38
Applied SF patch #694889 .
2004-01-16 16:30:46 +00:00
Daniel Gimpelevich
9915fca4e9
Applied SF patch #874816 .
2004-01-16 15:53:44 +00:00
Daniel Gimpelevich
b84ad185f5
Updated to 2003-11-27.
2004-01-16 15:15:49 +00:00
Daniel Gimpelevich
873651063e
Added support for Virtual Distributed Ethernet.
2004-01-16 14:44:38 +00:00
Daniel Gimpelevich
96142f8465
Fixed DLL-related crash.
2004-01-15 18:00:36 +00:00
Daniel Gimpelevich
6c26e6a65f
Introduced Frank Cornelis's PCIDEV patch.
2004-01-15 02:08:37 +00:00
Michael Brown
299947f64f
Added the PCI Pseudo-NIC (pnic). Mainly useful for running Etherboot
...
inside Bochs.
2004-01-13 19:21:21 +00:00
Volker Ruppert
2127a3925b
- re-implemented old VBE interface for backward compatibility (USB must be disabled)
2003-12-31 10:33:27 +00:00
Christophe Bothamy
37d62ebd90
- add temporary hack for compiling with visual c++
2003-12-29 21:48:56 +00:00
Volker Ruppert
154d9c3bea
- divider chain reset implemented (fixes bug #865354 )
2003-12-27 13:43:41 +00:00
Volker Ruppert
fc1abe8423
- gameport support is now disabled by default. It can be enabled with --enable-sb16=...
...
or the new option --enable-gameport.
- reading gameport with joystick not present now causes a BX_DEBUG message
2003-12-26 14:15:43 +00:00
Volker Ruppert
6ba47a1d7a
- gameport support is now disabled by default. It can be enabled with --enable-sb16=...
...
or the new option --enable-gameport.
- reading gameport with joystick not present now causes a BX_DEBUG message
2003-12-26 13:53:40 +00:00
Volker Ruppert
e8fcb2dd36
- unlike the OPL2, the OPL3 does not set bit 1 and 2 in the status register
...
- the OPL3 mode can only be enabled with command 05h sent to the second OPL chip
2003-12-26 10:06:57 +00:00
Volker Ruppert
b7767cc6ee
- DCR loopback bit fixed: bit 3 clear means loopback mode, so subtracting 8 was
...
wrong. Now the bits are working right, but loopback is still not present.
- loopback should be active if DCR is in loopback mode and TCR loop mode is > 0
- reading the FIFO is only valid in loopback mode (causes a BX_ERROR for now)
2003-12-25 16:58:17 +00:00
Volker Ruppert
815a083f86
- special rule for the gameport plugin on win32 added
2003-12-21 22:36:37 +00:00
Volker Ruppert
f0b06b6da8
- real gameport access implemented for the win32 platform
2003-12-21 17:24:45 +00:00
Volker Ruppert
e7879f6c73
- mixer register behaviour fixes (old registers are bitmapped to the ones)
...
- mixer reset sets default values
- mixer log messages fixed and improved
2003-12-20 17:04:08 +00:00
Volker Ruppert
f731c1774c
- DEV_set_media_status() not necessary in gui floppy handlers when using the
...
win32 floppy dialog
- report geometry with BX_INFO after inserting new floppy media
2003-12-18 20:04:49 +00:00
Volker Ruppert
0569c80236
- initialize structure 'stat_buf' if using raw device access on win32 (grabbed
...
from bug report #857235 )
2003-12-10 22:14:01 +00:00
Daniel Gimpelevich
854f360f9f
Partially applied patches 856506 and 856510.
2003-12-08 23:49:48 +00:00
Daniel Gimpelevich
878134572a
Applied patch to remove 0xfff0 legacy port.
2003-12-08 19:36:23 +00:00
Volker Ruppert
a0b896dc22
- determine media geometry on Linux and win32 host
2003-12-07 15:59:32 +00:00
Volker Ruppert
6113bf4d89
- evaluate_media(): code for character or block devices simplified (TODO: determine
...
media size)
2003-12-06 13:59:30 +00:00
Volker Ruppert
df8604baee
- applied patch #850236 : fixed direct device access to DVD's on win32
2003-11-30 20:54:42 +00:00
Daniel Gimpelevich
fff74a6f83
Fixed incompatibility with gcc3.3, I think.
2003-11-28 15:07:29 +00:00
Christophe Bothamy
0d281a9cca
- initialize ata controller state even if master/slave device is not
...
present. This would prevent the simulation from running on windows
if no slave device was present on the ata0 interface.
2003-11-25 23:00:06 +00:00
Volker Ruppert
335507ac38
- evaluate_media(): floppy type handling for images rewritten. The function now
...
fails if the image size is too large for the selected type.
- evaluate_media(): enclose path names in single quotes in BX_INFOs
2003-11-23 21:54:59 +00:00
Volker Ruppert
e827d430f2
- don't try to insert the floppy media if the path name is "none"
...
- evaluate_media(): new variable 'raw_floppy' indicates raw floppy access on win32
- evaluate_media(): try to read the first sector determine the presence of the
floppy media (raw access on win32)
2003-11-22 18:22:45 +00:00
Volker Ruppert
c1989c68da
- removed unused stuff
2003-11-16 08:21:10 +00:00
Volker Ruppert
5cd8ea6be1
- split the fprintf() call in the writelog() function. This is a workaround for
...
a bug in cygwin and mingw/msys (loglevel was always 0)
- DSP test register implemented
2003-11-15 14:56:30 +00:00
Volker Ruppert
31fcbd1bad
- DSP command 0xE0 returns bitwise NOT of data byte
...
- SB16 returns DSP version 4.05 (4.11 is SB16 SCSI-2)
2003-11-14 19:00:32 +00:00
Volker Ruppert
7e19d19b54
- don't panic at controller command 0xa0 (keyboard BIOS name)
2003-11-11 18:18:36 +00:00
Volker Ruppert
6866ca21d6
- serial FIFO support (UART type 16550A) implemented
2003-11-09 00:14:43 +00:00
Christophe Bothamy
740d0806f5
- fix bug that corrupts disk data when using a redolog.
2003-11-07 22:59:05 +00:00
Volker Ruppert
c99cd71125
- don't print the VBE disable info if the status is unchanged
2003-11-06 18:48:01 +00:00
Volker Ruppert
597c2834ca
- CRTC initialisation fixed (bug found with valgrind)
2003-11-02 16:34:10 +00:00
Volker Ruppert
6c398a7170
- the CRT controller works the same way in color and monochrome emulation modes
...
- use the same text mode update code for color and monochrome modes (vga mode 0x07
now works with the Elpin BIOS)
2003-11-01 10:28:40 +00:00
Volker Ruppert
2ef7ec8973
- new function raise_interrupt() manages the serial interrupt reasons
...
- the line status register only causes an interrupt if an error occurs
- missing initial baurate value added (using 115200)
- baudrate divisor value checks fixed
2003-10-31 17:23:56 +00:00
Volker Ruppert
5616d81a67
- removed unnecessary comments
2003-10-31 15:49:29 +00:00
Volker Ruppert
2fc0b134ed
- interrupt and i/o port initialization moved into the initialization loop
...
- new function lower_interrupt() lowers the irq line if no interrupts are pending
- IER write code: missing conditions for lower_interrupt() added
- symbol BX_SERIAL_CONFDEV removed (now using BX_N_SERIAL_PORTS)
2003-10-29 21:00:04 +00:00
Volker Ruppert
5540cd5664
- printer sends ACK after init
...
- irq number added to BX_INFO in init()
2003-10-29 17:29:26 +00:00
Christophe Bothamy
39db299002
- remove references to zlib compressed disk images.
...
Gzipped disk images are too slow to be useful anyway.
Proper read/write compressed disk image support
will be implemented after 2.1
2003-10-29 01:13:16 +00:00
Volker Ruppert
fbba69380b
- MCR bit 3 (OUT2) controls the serial interrupt generation, but has no effect
...
on the IIR (only depends on the IER).
- IER write code rewritten. The "THR empty" interrupt will be generated immediately
after enabling this interrupt reason.
2003-10-28 18:40:00 +00:00
Volker Ruppert
f46ff184f6
- applied patch #724466 (libtool needs --mode=compile and --mode=link to work
...
without warnings)
2003-10-26 10:00:20 +00:00
Daniel Gimpelevich
5586f6054b
*** empty log message ***
2003-10-24 11:16:25 +00:00
Volker Ruppert
33847825a2
- TTY_HACK feature removed. It no longer compiles and it has been replaced by
...
the SERIAL_ENABLE feature.
- rx_timer value for data sizes other than 8 fixed
- initial comment updated
2003-10-12 10:51:58 +00:00
Daniel Gimpelevich
c249cc8709
Update to coincide with Volker's adjustment to VGA-BIOS upstream.
2003-10-05 23:15:45 +00:00
Daniel Gimpelevich
abc180a397
fix oversight and prepare for change in vgabios
2003-10-04 15:58:21 +00:00
Daniel Gimpelevich
d0c10dd46b
*** empty log message ***
2003-10-02 11:33:42 +00:00
Christophe Bothamy
e856e9c46e
- fix utc time for bsd, that also works for linux.
...
Patch by Daniel Gimpelevich
2003-10-02 07:38:00 +00:00
Bryce Denney
fdeff47720
- add typecast to Bit64s to get around VC++ fatal error
2003-10-01 02:06:14 +00:00
Christophe Bothamy
27b8d78e2d
- add parameter to set the redolog name for 'volatile' and 'undoable' disks
2003-09-22 23:32:24 +00:00
Christophe Bothamy
95b002087f
- remove unwanted if (...) added in rev1.109
2003-09-17 12:19:34 +00:00
Christophe Bothamy
92f4a281b0
- fix compile problem when configured with --disable-cdrom (patch by Jamie Baxter)
2003-09-17 12:02:54 +00:00