- soundlow: prepared code for 2 pcm parameter sets:
emulated: requested by sendwavepacket()
real: used for the sound output
- soundsdl: startwaveplayback() rewritten to set_pcm_data().
- soundmod: some beep init code fixes.
- OPL3: Added support to change the samplerate of the generator.
- SDL sound: convert wave packet to 16 Bit signed stereo format.
- Increased the maximum size of a single wave packet for playbck/recording.
- Beep thread now only started one per simulation.
- Added some more multithreading macros and use them in rfb, vncsrv and soundmod.
- TODO: implement mixer thread and remove beep thread.
The code currently only works with the SDL sound output module and at 44100 Hz,
with 16 bit stereo signed little endian format. FM volume control and
save/restore support are not implemented yet. The legacy code for generating
MIDI notes still works and will be removed when mixing support is implemented
in all sound modules.
- Define new structure bx_pcm_param_t and use it as a parameter for the method
sendwavepacket(). The method startwavepacket() is now called from
sendwavepacket() in case of a parameter change (temporary solution).
- soundsdl: Replaced waveready() call by some more accurate code for buffer
space check in sendwavepacket().
- soundsdl: Moved code for reading from audio buffer to a new function.
- soundsdl: Temporarily increase the audio buffer size.
- Preparing the SB16 code for the OPL emulation port from DOSBox.
- Reworked wave callback code to support 2 input sources (no mixing yet).
- Fixed SDL sound output.
- Beep generator fixes.
- Prepared the SB16 code for FM OPL output support (to be ported from DOSBox).
- Renamed wavedata callback type.
- Handle sample rate in the beep generator (TODO: handle data format).
- Don't call waveready() in the SB16 code.
- Attempt to fix SDL2 wave output using SDL_LockAudio() / SDL_UnlockAudio().
- SDL specific code in the beep thread no longer needed.
- Added framework for polling wave data and use it for beep output in sdl.
- Some work in the beep thread code (to be continued).
- Moved macros required for multithreading to bochs.h.
- Increment timer counter before checking for overflow.
- Implemented ISA bus delay in the pc_system code and use it for the SB16.
This makes OPL chip detection work at ips values > 4 Mips.
TODO: OPL chip should use wave output instead of MIDI (maybe port from DOSBox).
TODO: Use isa_bus_delay() for other legacy devices if required.
- feature implemented in the wxWidgets gui
- feature not required for legacy SDL (releases keys on focus change)
- removed duplicate code in keyboard.cc
- TODO: implement feature in the win32 gui if required
The timers now have a new member 'realtime' and they are driven by the
selected engine. The VGA update timer and the status LED timer now always use
the realtime mode, but the PIT and CMOS RTC depend on the clock options.
TODO: improve virtual timer to make operate in both modes at the same time.
The vga update code should always use the realtime mode and the pit timing
should depend on the clock option.
Notes by Ben:
This emulates a NEC/Renesas uPD720202 2-port (2 socket, 4-port register sets)
Root Hub xHCI Host Controller.
Many, many thanks to Renesas for their work and effort in helping my research.
I have tested in with my own tests and WinXP Home Edition SP3.
Use port1 and port2 to emulate a Super-speed device, and use port3 and port4
to emulate Low-, Full-, or High-speed devices.
NOTE: The Windows driver for this device uses a proprietary detection
mechanism and we don't have the permission to implement it. That's why it only
works fine with non-Windows guests.
- removed max_packet_size member from USB device structure
- usb_uhci: improved speed info
- updated USB-related documentation
- TODO: review and test the main part of the xHCI changes by Ben
the init code. Started with the SeeReg[] array values. Some other setting could
be added later. The parser code is based on the slirp config parser.
Slirp: fixed possible segfault if the value for a parameter is missing.