- missing reset of PCI slot options added
- parsing of i440fxsupport config line rewritten
- vga_update_interval default value changed to 40000 and docs updated
- some more documentation updated including default values for some bochsrc options
number of steps to do, the step rate time and the date rate
- the option floppy_command_delay is obsolete now, since all floppy delays are
based on the hardware specs. The usage of this option caused a warning now.
optromimage. You can load up to 4 arbitrary binary images into RAM.
I didn't do any checking on the addresses, so it's up to you to make
sure they don't collide with anything else. Should only be used for
placing files into standard RAM.
* added a few more intra-documentation links
* sync'ed software license introduction line among sections
* added Cirrus video card hint and bypass hardware check parameter
to Windows 98 section
- descriptions of 'romimage' and 'megs' updated
- usage of old-style syntax for 'user_shortcut' now causes a warning
- deprecated options 'pit' and 'time0' now cause an error
- old disk options completely removed from bochsrc parser
- documentation changes: 'pit' and 'time0' removed, 'user_shortcut' updated
with a '-' character. Added support for some more keys. The old-style syntax
is still supported for a few key combinations.
- updated/added documentation for the 'cmosimage' option
- removed obsolete parameters for usb1 and pnic (now assigned by the PCI BIOS)
- PCI base address register mechanism now leaves the flags untouched
- missing reset of pnic options added
- cmos image options renamed
- new cmos option controls the usage of the RTC values from image
- report time0 in use after handling the cmos image stuff
- MSVC warning fixed
* simple read-only TFTP server implemented
* don't discard IPv4 packets larger than the length stored in header
- TFTP server uses ethdev value for the root directory
- removed trailing newlines in messages
- log file description improved (disable logging on win32)
- usb1 description added
- vgaromimage: VGABIOS-lgpl-latest is now the default
- wxWindows changed to wxWidgets
* updated description for bochsrc options com[1-4], mouse, i440fxsupport
* added description for bochsrc option 'gdbstub'
- updated syntax of bochsrc option 'vgaromimage'
- updated remark for the usage of the LGPL'd VGABIOS and Windows NT 4.0
- updated some descriptions in the bochsrc sample
#1079240 by Ben Lunt. There are still some problems:
- PS/2 mouse is always present (some code to emulate a disconnected mouse needed)
- PS/2 wheel mouse doesn't work properly
- serial wheel mouse detected as a standard mouse and doesn't work at all
- vgaromimage option now compatible with the other rom options. Old style syntax
(without 'file=...") is still supported.
- load order for the rom images fixed (system, vga, other)
- rom images sizes not multiple 512 cause a BX_INFO for now. The original check
will be enabled after updating the vgabios files
- optromimage error messages fixed
- some updates of the bochsrc sample
data written to the port and where to get the data read from it. Available
modes are 'null' (no input/output), 'file' (output to a file specified as
the 'dev' parameter), 'term' (serial terminal) and 'raw' (use the real serial
port - under construction for win32).
- descriptions for serial and parallel options in bochsrc sample updated
* up to 5 slots can be specified with the 'i440fxsupport' config option
* the pci slot number are hardwired to pci device numbers
* the 'devfunc' value is returned the calling device (useful for multi-function
devices)
* the core of the i440FX chipset is hardwired to pci device 1 + 2; usb is still
optional and appears at device 1, function 2
- ne2k: enable pci features if connected to a pci slot
- ne2k: asic data port supports 32-bit access if ne2k-pci is active
- pci2isa: improved error messages for ELCR1 and ELCR2
- pit: and time0: options are still supported but deprecated
- warn when parsing deprecated directives
- fix wrong number of ata_device_translation_names
- still to do:
- setting time0 to utc is not yet supported
- the man page, user guide and .bochsrc still need to be updated
with the new options
You can now choose for each disk on the ata interfaces the
disk mode, between :
- flat : one file flat layout
- concat : multiple files layout
- external : developer's specific, through a C++ class
- dll : developer's specific, through a DLL
- sparse : stackable, commitable, rollbackable
- vmware3 : vmware3 disk support
- undoable : flat file with commitable redolog
- growable : growing file
- volatile : flat file with volatile redolog
- z-undoable : gziped flat file with commitable redolog
- z-volatile : gziped flat file with volatile redolog
A new "bxcommit" utility can merge commitable redologs to
flat images.
- function userbutton_handler(): stop parsing the shortcut string if the
key name is invalid
- function userbutton_handler(): incrementing variable 'len' simplified
- function snapshot_checker(): fixed a warning
there is one more option in the configuration file "debugger_log"
if the debugger is compiled in, all debugger output will be also
written to this file. Note: wxWindow config interface is not updated yet
a control panel, but now we're calling it a text configuration interface.
Modified:
.bochsrc Makefile.in bochs.h main.cc cpu/Makefile.in
debug/Makefile.in disasm/Makefile.in fpu/Makefile.in
gui/Makefile.in iodev/Makefile.in memory/Makefile.in
- if translation=auto :
. translation=none if cylinders <=1024 and heads <=16
. translation=large if cylinders * heads <= 131072
. transaltion=lba otherwise
- changes default translation value to "auto"
- add example in .bochsrc
section title, and less like the grammar that you're supposed to use.
Someone on irc was confused because it was written in uppercase, but then
bochs did not accept the uppercase ATA0-MASTER parameter.
- Features :
. number of active channels defined at boot-time config
. new options in bochsrc
. up to 8 devices support (disks or cdroms)
. up to 4 cdrom devices can be changed at runtime config
. wxwindows config interface
to "*_ENABLED"
- bx_serial_options for all 4 ports moved into an array com[4]
- serial port com1 is enabled by default
- detection of com2, com3 and com4 config options disabled for now
- new parameter "enabled" added to the serial bochsrc options
- error handling for serial and parallel bochsrc options changed. The unhandled
BX_PANICs are replaced by BX_ERRORs.
- new function bx_write_serial_options() added
- serial destructor restores original terminal settings only when serial port
is enabled and the tty_id is valid
parport1 with the new option "enabled". The old option "enable" only
controlled the output. The parport1 is enabled with no output by default.
Changes:
* bochrc option "enable" replaced by "enabled"
* parport option "Oenable" replaced by "Opresent"
* bx_parport_options par1 and par2 replaced by an array par[2]
* initialize parport1 resources only when enabled
* renamed variable "parport_init_list" to "par_ser_init_list" since it
contains parport and serial options
* documentation and bochsrc updates
- the parport variables "output" and "initmode" now belong to the bx_par_t
structure
- TODO: add parport2 (disabled by default), parport detection in the bios
the guest OS. The shortcut can be defined in the bochsrc or in the config
interface. It is possible to change it at runtime.
These shortcuts are currently recognized:
ctrlaltdel, ctrlaltesc, ctrlaltf1, alttab
Here is the list of changes:
* userbutton.h and userbutton.xpm added in gui/bitmaps
* config options for the userbutton shortcut added
* initialize the new button in the gui.cc
* the new userbutton handler generates keypresses and relaeses depending on
the shortcut keyword
* the gui stops adding buttons to the headerbar if not enough space is left.
This can happen when the screen width is 320 pixels (done for X11 only).
* TODO: build a dialog box for the wxWindows gui
to describe the format of the log prefix. This option can be any string
with special tokens being replaced at run time :
# %t : 11 decimal digits timer tick
# %i : 8 hexadecimal digits of cpu0 current eip
# %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
# %d : 5 characters string of the device, between brackets
the default is "%t%i%d", so the logprefix is the same as before.
New tokens can be easily added or changed if needed.
Modified Files:
.bochsrc bochs.h logio.cc main.cc gui/control.cc
gui/siminterface.h gui/siminterface.cc
patches/patch.logfilefmteip
floppy_bootsig_check: disabled=[0|1]. It is not disabled by default.
Sorry for any inconvenience it could cause
- changed the default (if cmos reg is 0) behavior for the floppy boot signature
check, so the new bios is compatible with older bochs binaries (useful if we
want to use the new bios when we release 1.4.1) :
1 : disabled
0 : enabled
- added info at launch time about the boot device and the floppy boot signature
check
- added a "LBA capable" flag in the ata controller
- fixed opened netdevice name (/dev/net/tun...)
- fixed test on iface name (tun instead of tap)
- cosmetic changes
- added example in .bochsrc
Much of these fixes have been contributed by Frederic Bothamy
Here are the patches (without the serial name fix). Let me know if you want
me to change that. Oh, FYI, my changes also open up the com1 terminal in raw
mode, which makes the emulation much more accurate. You'll also notice that
I added infrastructure for com2->4 in the option parsing. I didn't add it to
the serial code, as I think a bunch of things need to be untangled before
that can work.
interface menus. Parallel port #1 is implemented, and I left stubs for
parallel port #2 in case we want to ever add it. If the parallel port
is enabled, the init method of parallel.cc does an fopen() on the output
file. If disabled, or if the fopen fails, the file handler remains
NULL and no characters are printed. There is no attempt to enable/disable
the operation of the parallel port, only the output to a file.
BX_SUPPORT_APIC were used. To follow the pattern used by other
names like this, I changed them all to BX_SUPPORT_APIC.
Thanks to Tom Lindström for chasing this down!
in BRANCH-smp-bochs revisions.
- The general task was to make multiple CPU's which communicate
through their APICs. So instead of BX_CPU and BX_MEM, we now have
BX_CPU(x) and BX_MEM(y). For an SMP simulation you have several
processors in a shared memory space, so there might be processors
BX_CPU(0..3) but only one memory space BX_MEM(0). For cosimulation,
you could have BX_CPU(0) with BX_MEM(0), then BX_CPU(1) with
BX_MEM(1). WARNING: Cosimulation is almost certainly broken by the
SMP changes.
- to simulate multiple CPUs, you have to give each CPU time to execute
in turn. This is currently implemented using debugger guards. The
cpu loop steps one CPU for a few instructions, then steps the
next CPU for a few instructions, etc.
- there is some limited support in the debugger for two CPUs, for
example printing information from each CPU when single stepping.
- change Makefile.in to "cvs-snapshot" information rather than printing
the release number, since in fact it's not the same as the release anymore
- use #defines to give the actions names (ACT_IGNORE, ACT_REPORT, ACT_FATAL)
- register all logfunctions as they call setio, and keep a list so that
we can change their settings more easily. I admit I used a static-sized
array to store them. Sorry.
- instead of printing a prefix [GEN ] for generic messages, just leave the
prefix blank [ ]. Otherwise you start wondering what does gen stand
for.
- avoid reentry into fatal, since fatal can call BX_INFO and friends.
This avoids a potential infinite recursion.
- now that files other than .bochsrc can be the rc file, print the
actual name of the file in error messages.
what action to take on panic, error, info, and debug. The lines don't
have any effect quite yet because of an initialization order problem
with the logfunctions.
to plex86 on 5/14/2001 and said that it was okay:
> Yes, thanks to MandrakeSoft, the Elpin VGA BIOS 2.40 was licensed
> for use in _both_ plex86 and bochs. So you can distribute 2.40.
>
> Replace the text in 'bios/VGABIOS-elpin-LICENSE', with the
> same file from the plex86 CVS tree. Substitute bochs wherever
> plex86 occurs.
