- renamed PCI Pseudo NIC bochsrc option to "pcipnic" (temporary hack should
be removed after next Bochs release) - documentation updates
This commit is contained in:
Volker Ruppert
parent
24edf649eb
commit
82c65076cc
@ -8,11 +8,12 @@
|
||||
# only available when the plugin device is loaded. The value "1" means to load
|
||||
# the plugin and "0" will unload it (if loaded before).
|
||||
#
|
||||
# These plugins will be loaded by default: 'biosdev', 'extfpuirq', 'parallel',
|
||||
# 'serial', 'speaker' and 'unmapped'.
|
||||
# These plugins will be loaded by default (if present): 'biosdev', 'extfpuirq',
|
||||
# 'gameport', 'iodebug','parallel', 'serial', 'speaker' and 'unmapped'.
|
||||
#
|
||||
# These plugins can be loaded on demand: 'e1000', 'es1370', 'gameport', 'iodebug',
|
||||
# 'ne2k', 'pcidev', 'pcipnic', 'sb16', 'usb_ohci', 'usb_uhci' and 'usb_xhci'.
|
||||
# These plugins are also supported, but they are usually loaded directly with
|
||||
# their bochsrc option: 'e1000', 'es1370', 'ne2k', 'pcidev', 'pcipnic', 'sb16',
|
||||
# 'usb_ohci', 'usb_uhci' and 'usb_xhci'.
|
||||
#=======================================================================
|
||||
#plugin_ctrl: unmapped=0, e1000=1 # unload 'unmapped' and load 'e1000'
|
||||
|
||||
@ -739,8 +740,7 @@ parport1: enabled=1, file="parport.out"
|
||||
#=======================================================================
|
||||
# ES1370:
|
||||
# This defines the ES1370 sound emulation. The parameter 'enabled' controls the
|
||||
# presence of the device. In addition to this, it must be loaded with 'plugin_ctrl'
|
||||
# and assigned to a PCI slot. The 'wavedev' parameter is similar to the 'wave'
|
||||
# presence of the device. The 'wavedev' parameter is similar to the 'wave'
|
||||
# parameter of the SB16 soundcard. The emulation supports recording and playback
|
||||
# (except DAC1+DAC2 output at the same time).
|
||||
#
|
||||
@ -892,18 +892,16 @@ private_colormap: enabled=0
|
||||
# ne2k: mac=b0:c4:20:00:00:01, ethmod=slirp, script=/usr/local/bin/slirp, bootrom=ne2k_pci.rom
|
||||
|
||||
#=======================================================================
|
||||
# pnic: Bochs/Etherboot pseudo-NIC
|
||||
# pcipnic: Bochs/Etherboot pseudo-NIC
|
||||
#
|
||||
# Format:
|
||||
# pnic: enabled=1, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT,
|
||||
# bootrom=BOOTROM
|
||||
# pcipnic: enabled=1, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT,
|
||||
# bootrom=BOOTROM
|
||||
#
|
||||
# The pseudo-NIC accepts the same syntax (for mac, ethmod, ethdev, script,
|
||||
# bootrom) and supports the same networking modules as the NE2000 adapter.
|
||||
# In addition to this, it must be loaded with 'plugin_ctrl' and assigned
|
||||
# to a PCI slot.
|
||||
#=======================================================================
|
||||
#pnic: enabled=1, mac=b0:c4:20:00:00:00, ethmod=vnet
|
||||
#pcipnic: enabled=1, mac=b0:c4:20:00:00:00, ethmod=vnet
|
||||
|
||||
#=======================================================================
|
||||
# e1000: Intel(R) 82540EM Gigabit Ethernet adapter
|
||||
@ -913,8 +911,7 @@ private_colormap: enabled=0
|
||||
# bootrom=BOOTROM
|
||||
#
|
||||
# The E1000 accepts the same syntax (for mac, ethmod, ethdev, script, bootrom)
|
||||
# and supports the same networking modules as the NE2000 adapter. In addition
|
||||
# to this, it must be loaded with 'plugin_ctrl' and assigned to a PCI slot.
|
||||
# and supports the same networking modules as the NE2000 adapter.
|
||||
#=======================================================================
|
||||
#e1000: enabled=1, mac=52:54:00:12:34:56, ethmod=slirp, script=/usr/local/bin/slirp
|
||||
|
||||
@ -960,8 +957,11 @@ keyboard_mapping: enabled=0, map=
|
||||
# PCI:
|
||||
# This option controls the presence of a PCI chipset in Bochs. Currently it only
|
||||
# supports the i440FX chipset. You can also specify the devices connected to
|
||||
# PCI slots. Up to 5 slots are available. These devices are currently supported:
|
||||
# cirrus, e1000, es1370, ne2k, pcivga, pcidev, pcipnic, usb_ohci and usb_xhci.
|
||||
# PCI slots. Up to 5 slots are available. For these combined PCI/ISA devices
|
||||
# assigning to slot is mandatory if you want to emulate the PCI model: cirrus,
|
||||
# ne2k and pcivga. These PCI-only devices are also supported, but they are
|
||||
# auto-assigned if you don't use the slot configuration: e1000, es1370, pcidev,
|
||||
# pcipnic, usb_ohci and usb_xhci.
|
||||
#
|
||||
# Example:
|
||||
# pci: enabled=1, chipset=i440fx, slot1=pcivga, slot2=ne2k
|
||||
@ -973,7 +973,7 @@ pci: enabled=1, chipset=i440fx
|
||||
# This option controls the presence of the USB root hub which is a part
|
||||
# of the i440FX PCI chipset. With the portX parameter you can connect devices
|
||||
# to the hub (currently supported: 'mouse', 'tablet', 'keypad', 'disk', 'cdrom'
|
||||
# 'hub' and 'printer'). NOTE: UHCI must be loaded with 'plugin_ctrl'.
|
||||
# 'hub' and 'printer').
|
||||
#
|
||||
# The optionsX parameter can be used to assign specific options to the device
|
||||
# connected to the corresponding USB port. Currently this feature is only used
|
||||
@ -1013,8 +1013,7 @@ pci: enabled=1, chipset=i440fx
|
||||
# USB_OHCI:
|
||||
# This option controls the presence of the USB OHCI host controller with a
|
||||
# 2-port hub. The portX option accepts the same device types with the same
|
||||
# syntax as the UHCI controller (see above). The OHCI HC must be assigned to
|
||||
# a PCI slot and loaded with 'plugin_ctrl'.
|
||||
# syntax as the UHCI controller (see above).
|
||||
#=======================================================================
|
||||
#usb_ohci: enabled=1
|
||||
#usb_ohci: enabled=1, port1=printer:usbprinter.bin
|
||||
@ -1023,8 +1022,7 @@ pci: enabled=1, chipset=i440fx
|
||||
# USB_XHCI:
|
||||
# This option controls the presence of the experimental USB xHCI host controller
|
||||
# with a 4-port hub. The portX option accepts the same device types with the
|
||||
# same syntax as the UHCI controller (see above). The xHCI HC must be assigned
|
||||
# to a PCI slot and loaded with 'plugin_ctrl'.
|
||||
# same syntax as the UHCI controller (see above).
|
||||
#=======================================================================
|
||||
#usb_xhci: enabled=1
|
||||
|
||||
|
||||
@ -43,6 +43,8 @@ Changes after 2.5.1 release:
|
||||
- Ported Intel(R) 82540EM Gigabit Ethernet adapter emulation from Qemu,
|
||||
to enable configure with option --enable-e1000
|
||||
- Added PCI network boot ROM support to all network adapters
|
||||
- PCI
|
||||
- added "auto-assign to PCI slot" feature for PCI-only devices
|
||||
- VGA
|
||||
- Major rewrite of the vga / cirrus code:
|
||||
- vgacore (shared standard VGA emulation code)
|
||||
@ -67,8 +69,10 @@ Changes after 2.5.1 release:
|
||||
- Gui debugger now supported when using sdl gui on Windows
|
||||
|
||||
- Config interface
|
||||
- The bochsrc option 'plugin_ctrl' is now used to load optional plugins
|
||||
directly when parsing the config file or command line. See the bochsrc
|
||||
- Added support for direct device plugin loading with bochsrc directive for
|
||||
devices which have the same name for the plugin and config option.
|
||||
- The bochsrc option 'plugin_ctrl' can now be used to load/unload optional
|
||||
plugins directly when parsing the config file or command line. See the bochsrc
|
||||
sample for supported devices.
|
||||
- Moved bochsrc parsing / writing and config parameter handling for networking,
|
||||
sound and USB devices to the plugin device code. The options are only
|
||||
@ -76,6 +80,7 @@ Changes after 2.5.1 release:
|
||||
- Added ability to set log action per device from .bochsrc.
|
||||
- Added new command line option '-noconsole' to disable the console
|
||||
window on Windows host.
|
||||
- renamed PCI Pseudo NIC option to "pcipnic" (for direct plugin loading)
|
||||
|
||||
- Tools
|
||||
- bxcommit: added support for converting growing to flat mode images
|
||||
@ -117,7 +122,7 @@ Changes after 2.5.1 release:
|
||||
[3493315] Changing VGA 9/8 dot mode causes screen corruption
|
||||
|
||||
- these S.F. feature requests were closed/implemented
|
||||
[1251456] command line method to query boch for features
|
||||
[1251456] command line method to query bochs for features
|
||||
[3409396] sdl sound
|
||||
[3519794] debugger's ability to save physical/linear memory dumps
|
||||
[1429612] Idea how to speedup simulation - stack direct access
|
||||
|
||||
@ -2080,6 +2080,13 @@ static int parse_line_formatted(const char *context, int num_params, char *param
|
||||
PARSE_ERR(("%s: a bochsrc option needs at least one parameter", context));
|
||||
}
|
||||
|
||||
#if BX_SUPPORT_PCIPNIC
|
||||
// Temporary HACK for the PCI Pseudo NIC's bochsrc option name change
|
||||
if (!strcmp(params[0], "pnic")) {
|
||||
strcpy(params[0], "pcipnic");
|
||||
}
|
||||
#endif
|
||||
|
||||
if (!strcmp(params[0], "#include")) {
|
||||
if (num_params != 2) {
|
||||
PARSE_ERR(("%s: ignoring malformed #include directive.", context));
|
||||
|
||||
@ -2904,12 +2904,13 @@ only available when the plugin device is loaded. The value "1" means to load
|
||||
the plugin and "0" will unload it (if loaded before).
|
||||
</para>
|
||||
<para>
|
||||
These plugins will be loaded by default: 'biosdev', 'extfpuirq', 'parallel',
|
||||
'serial', 'speaker' and 'unmapped'.
|
||||
These plugins will be loaded by default (if present): 'biosdev', 'extfpuirq',
|
||||
'gameport', 'iodebug','parallel', 'serial', 'speaker' and 'unmapped'.
|
||||
</para>
|
||||
<para>
|
||||
These plugins can be loaded on demand: 'e1000', 'es1370', 'gameport', 'iodebug',
|
||||
'ne2k', 'pcidev', 'pcipnic', 'sb16', 'usb_ohci', 'usb_uhci' and 'usb_xhci'.
|
||||
These plugins are also supported, but they are usually loaded directly with
|
||||
their bochsrc option: 'e1000', 'es1370', 'ne2k', 'pcidev', 'pcipnic', 'sb16',
|
||||
'usb_ohci', 'usb_uhci' and 'usb_xhci'.
|
||||
</para>
|
||||
</section>
|
||||
|
||||
@ -3895,10 +3896,9 @@ Examples:
|
||||
es1370: enabled=1, wavedev=sdl # use SDL audio (if present) for output
|
||||
</screen>
|
||||
This defines the ES1370 sound emulation. The parameter 'enabled' controls the
|
||||
presence of the device. In addition to this, it must be assigned to a PCI
|
||||
slot. The 'wavedev' parameter is similar to the 'wave' parameter of the SB16
|
||||
soundcard. The emulation supports recording and playback (except DAC1+DAC2
|
||||
output at the same time).
|
||||
presence of the device. The 'wavedev' parameter is similar to the 'wave'
|
||||
parameter of the SB16 soundcard. The emulation supports recording and playback
|
||||
(except DAC1+DAC2 output at the same time).
|
||||
</para>
|
||||
</section>
|
||||
|
||||
@ -4033,8 +4033,11 @@ Examples:
|
||||
</screen>
|
||||
This option controls the presence of a PCI chipset in Bochs. Currently it only
|
||||
supports the i440FX chipset. You can also specify the devices connected to
|
||||
PCI slots. Up to 5 slots are available. These devices are currently supported:
|
||||
cirrus, e1000, es1370, ne2k, pcivga, pcidev, pcipnic, usb_ohci and usb_xhci.
|
||||
PCI slots. Up to 5 slots are available. For these combined PCI/ISA devices
|
||||
assigning to slot is mandatory if you want to emulate the PCI model: cirrus,
|
||||
ne2k and pcivga. These PCI-only devices are also supported, but they are
|
||||
auto-assigned if you don't use the slot configuration: e1000, es1370, pcidev,
|
||||
pcipnic, usb_ohci and usb_xhci.
|
||||
</para>
|
||||
</section>
|
||||
|
||||
@ -4115,8 +4118,7 @@ code to the file if the file already existed. It would probably be nice to
|
||||
overwrite the file instead, asking user first.
|
||||
</para>
|
||||
<note><para>
|
||||
PCI support must be enabled and UHCI loaded with
|
||||
<link linkend="bochsopt-plugin-ctrl">plugin_ctrl</link>.
|
||||
PCI support must be enabled to use USB UHCI.
|
||||
</para></note>
|
||||
</section>
|
||||
|
||||
@ -4129,8 +4131,6 @@ Example:
|
||||
This option controls the presence of the USB OHCI host controller with a
|
||||
2-port hub. The portX option accepts the same device types with the same
|
||||
syntax as the UHCI controller (see the <link linkend="bochsopt-usb-uhci">usb_uhci option</link>).
|
||||
The OHCI HC must be assigned to a PCI slot and loaded with
|
||||
<link linkend="bochsopt-plugin-ctrl">plugin_ctrl</link>.
|
||||
</para>
|
||||
</section>
|
||||
|
||||
@ -4143,8 +4143,6 @@ Example:
|
||||
This option controls the presence of the experimental USB xHCI host controller
|
||||
with a 4-port hub. The portX option accepts the same device types with the same
|
||||
syntax as the UHCI controller (see the <link linkend="bochsopt-usb-uhci">usb_uhci option</link>).
|
||||
The xHCI HC must be assigned to a PCI slot and loaded with
|
||||
<link linkend="bochsopt-plugin-ctrl">plugin_ctrl</link>.
|
||||
</para>
|
||||
</section>
|
||||
|
||||
@ -4318,16 +4316,15 @@ version where this module was added.
|
||||
</table>
|
||||
</section>
|
||||
|
||||
<section><title>pnic</title>
|
||||
<section><title>pcipnic</title>
|
||||
<para>
|
||||
Example:
|
||||
<screen>
|
||||
pnic: enabled=1, mac=b0:c4:20:00:00:00, ethmod=vnet
|
||||
pcipnic: enabled=1, mac=b0:c4:20:00:00:00, ethmod=vnet
|
||||
</screen>
|
||||
To support the Bochs/Etherboot pseudo-NIC, Bochs must be compiled with the
|
||||
--enable-pnic configure option. It accepts the same syntax (for mac, ethmod,
|
||||
ethdev, script, bootrom) and supports the same networking modules as the NE2000 adapter.
|
||||
In addition to this, it must be assigned to a PCI slot.
|
||||
</para>
|
||||
</section>
|
||||
|
||||
@ -4340,7 +4337,6 @@ Example:
|
||||
To support the Intel(R) 82540EM Gigabit Ethernet adapter, Bochs must be compiled
|
||||
with the --enable-e1000 configure option. It accepts the same syntax (for mac, ethmod,
|
||||
ethdev, script, bootrom) and supports the same networking modules as the NE2000 adapter.
|
||||
In addition to this, it must be assigned to a PCI slot.
|
||||
</para>
|
||||
</section>
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
.\"Document Author: Timothy R. Butler - tbutler@uninetsolutions.com"
|
||||
.TH bochsrc 5 "10 Jun 2012" "bochsrc" "The Bochs Project"
|
||||
.TH bochsrc 5 "11 Jul 2012" "bochsrc" "The Bochs Project"
|
||||
.\"SKIP_SECTION"
|
||||
.SH NAME
|
||||
bochsrc \- Configuration file for Bochs.
|
||||
@ -48,11 +48,12 @@ directly with this option and some of them install a config option that is
|
||||
only available when the plugin device is loaded. The value "1" means to load
|
||||
the plugin and "0" will unload it (if loaded before).
|
||||
|
||||
These plugins will be loaded by default: biosdev, extfpuirq, parallel,
|
||||
serial, speaker and unmapped.
|
||||
These plugins will be loaded by default (if present): 'biosdev', 'extfpuirq',
|
||||
'gameport', 'iodebug','parallel', 'serial', 'speaker' and 'unmapped'.
|
||||
|
||||
These plugins can be loaded on demand: e1000, es1370, gameport, iodebug,
|
||||
ne2k, pcidev, pcipnic, sb16, usb_ohci, usb_uhci and usb_xhci.
|
||||
These plugins are also supported, but they are usually loaded directly with
|
||||
their bochsrc option: 'e1000', 'es1370', 'ne2k', 'pcidev', 'pcipnic', 'sb16',
|
||||
'usb_ohci', 'usb_uhci' and 'usb_xhci'.
|
||||
|
||||
Example:
|
||||
plugin_ctrl: unmapped=0, e1000=1 # unload 'unmapped' and load 'e1000'
|
||||
@ -782,10 +783,9 @@ one line in the actual bochsrc file.
|
||||
.TP
|
||||
.I "es1370:"
|
||||
This defines the ES1370 sound emulation. The parameter 'enabled' controls the
|
||||
presence of the device. In addition to this, it must be assigned to a PCI
|
||||
slot. The 'wavedev' parameter is similar to the 'wave' parameter of the SB16
|
||||
soundcard. The emulation supports recording and playback (except DAC1+DAC2
|
||||
output at the same time).
|
||||
presence of the device. The 'wavedev' parameter is similar to the 'wave'
|
||||
parameter of the SB16 soundcard. The emulation supports recording and playback
|
||||
(except DAC1+DAC2 output at the same time).
|
||||
|
||||
Examples:
|
||||
es1370: enabled=1, wavedev="" # win32
|
||||
@ -897,8 +897,11 @@ Example:
|
||||
.I "pci:"
|
||||
This option controls the presence of a PCI chipset in Bochs. Currently it only
|
||||
supports the i440FX chipset. You can also specify the devices connected to
|
||||
PCI slots. Up to 5 slots are available. These devices are currently supported:
|
||||
cirrus, e1000, es1370, ne2k, pcivga, pcidev, pcipnic, usb_ohci and usb_xhci.
|
||||
PCI slots. Up to 5 slots are available. For these combined PCI/ISA devices
|
||||
assigning to slot is mandatory if you want to emulate the PCI model: cirrus,
|
||||
ne2k and pcivga. These PCI-only devices are also supported, but they are
|
||||
auto-assigned if you don't use the slot configuration: e1000, es1370, pcidev,
|
||||
pcipnic, usb_ohci and usb_xhci.
|
||||
|
||||
Example:
|
||||
pci: enabled=1, chipset=i440fx, slot1=pcivga, slot2=ne2k
|
||||
@ -990,11 +993,11 @@ Examples:
|
||||
ne2k: mac=b0:c4:20:00:00:01, ethmod=slirp, script=/usr/local/bin/slirp, bootrom=ne2k_pci.rom
|
||||
|
||||
.TP
|
||||
.I "pnic:"
|
||||
.I "pcipnic:"
|
||||
To support the Bochs/Etherboot pseudo-NIC, Bochs must be compiled with the
|
||||
--enable-pnic configure option. It accepts the same syntax (for mac, ethmod,
|
||||
ethdev, script, bootrom) and supports the same networking modules as the NE2000
|
||||
adapter. In addition to this, it must be assigned to a PCI slot.
|
||||
adapter.
|
||||
|
||||
Example:
|
||||
pnic: enabled=1, mac=b0:c4:20:00:00:00, ethmod=vnet
|
||||
@ -1004,7 +1007,7 @@ Example:
|
||||
To support the Intel(R) 82540EM Gigabit Ethernet adapter, Bochs must be compiled
|
||||
with the --eanble-e1000 configure option. The E1000 accepts the same syntax
|
||||
(for mac, ethmod, ethdev, script, bootrom) and supports the same networking
|
||||
modules as the NE2000 adapter. In addition to this, it must be assigned to a PCI slot.
|
||||
modules as the NE2000 adapter.
|
||||
|
||||
Example:
|
||||
e1000: enabled=1, mac=52:54:00:12:34:56, ethmod=slirp, script=/usr/local/bin/slirp
|
||||
@ -1091,8 +1094,7 @@ Example:
|
||||
.I "usb_ohci:"
|
||||
This option controls the presence of the USB OHCI host controller with a
|
||||
2-port hub. The portX option accepts the same device types with the same
|
||||
syntax as the UHCI controller (see above). The OHCI HC must be assigned to
|
||||
a PCI slot and loaded with 'plugin_ctrl'.
|
||||
syntax as the UHCI controller (see above).
|
||||
|
||||
Example:
|
||||
usb_ohci: enabled=1
|
||||
@ -1101,8 +1103,7 @@ Example:
|
||||
.I "usb_xhci:"
|
||||
This option controls the presence of the experimental USB xHCI host controller
|
||||
with a 4-port hub. The portX option accepts the same device types with the same
|
||||
syntax as the UHCI controller (see above). The xHCI HC must be assigned to
|
||||
a PCI slot and loaded with 'plugin_ctrl'.
|
||||
syntax as the UHCI controller (see above).
|
||||
|
||||
Example:
|
||||
usb_xhci: enabled=1
|
||||
|
||||
@ -44,7 +44,7 @@ const Bit8u pnic_iomask[16] = {2, 0, 2, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||
void pnic_init_options(void)
|
||||
{
|
||||
bx_param_c *network = SIM->get_param("network");
|
||||
bx_list_c *menu = new bx_list_c(network, "pnic", "PCI Pseudo NIC");
|
||||
bx_list_c *menu = new bx_list_c(network, "pcipnic", "PCI Pseudo NIC");
|
||||
menu->set_options(menu->SHOW_PARENT);
|
||||
bx_param_bool_c *enabled = new bx_param_bool_c(menu,
|
||||
"enabled",
|
||||
@ -59,7 +59,7 @@ Bit32s pnic_options_parser(const char *context, int num_params, char *params[])
|
||||
{
|
||||
int ret, valid = 0;
|
||||
|
||||
if (!strcmp(params[0], "pnic")) {
|
||||
if (!strcmp(params[0], "pcipnic")) {
|
||||
bx_list_c *base = (bx_list_c*) SIM->get_param(BXPN_PNIC);
|
||||
if (!SIM->get_param_bool("enabled", base)->get()) {
|
||||
SIM->get_param_enum("ethmod", base)->set_by_name("null");
|
||||
@ -74,7 +74,7 @@ Bit32s pnic_options_parser(const char *context, int num_params, char *params[])
|
||||
if (valid == 0x04) {
|
||||
SIM->get_param_bool("enabled", base)->set(1);
|
||||
} else if (valid < 0x80) {
|
||||
BX_PANIC(("%s: 'pnic' directive incomplete (mac is required)", context));
|
||||
BX_PANIC(("%s: 'pcipnic' directive incomplete (mac is required)", context));
|
||||
}
|
||||
} else {
|
||||
if (valid & 0x80) {
|
||||
@ -102,13 +102,13 @@ int libpcipnic_LTX_plugin_init(plugin_t *plugin, plugintype_t type, int argc, ch
|
||||
// add new configuration parameter for the config interface
|
||||
pnic_init_options();
|
||||
// register add-on option for bochsrc and command line
|
||||
SIM->register_addon_option("pnic", pnic_options_parser, pnic_options_save);
|
||||
SIM->register_addon_option("pcipnic", pnic_options_parser, pnic_options_save);
|
||||
return 0; // Success
|
||||
}
|
||||
|
||||
void libpcipnic_LTX_plugin_fini(void)
|
||||
{
|
||||
SIM->unregister_addon_option("pnic");
|
||||
SIM->unregister_addon_option("pcipnic");
|
||||
bx_list_c *menu = (bx_list_c*)SIM->get_param("network");
|
||||
menu->remove("pnic");
|
||||
delete thePNICDevice;
|
||||
|
||||
@ -161,8 +161,8 @@
|
||||
#define BXPN_XHCI_ENABLED "ports.usb.xhci.enabled"
|
||||
#define BXPN_NE2K "network.ne2k"
|
||||
#define BXPN_NE2K_ENABLED "network.ne2k.enabled"
|
||||
#define BXPN_PNIC "network.pnic"
|
||||
#define BXPN_PNIC_ENABLED "network.pnic.enabled"
|
||||
#define BXPN_PNIC "network.pcipnic"
|
||||
#define BXPN_PNIC_ENABLED "network.pcipnic.enabled"
|
||||
#define BXPN_E1000 "network.e1000"
|
||||
#define BXPN_E1000_ENABLED "network.e1000.enabled"
|
||||
#define BXPN_SOUND_SB16 "sound.sb16"
|
||||
|
||||
Loading…
Reference in New Issue
Block a user