diff --git a/bochs/CHANGES b/bochs/CHANGES
index f41b78c2e..a9e6ff3ad 100644
--- a/bochs/CHANGES
+++ b/bochs/CHANGES
@@ -97,6 +97,7 @@ Detailed change log :
 
   - SVGA Cirrus:
     - PCI MMIO space is not disabled if the Cirrus card is in VGA mode
+    - Fixed color expand bitblt with dword granularity enabled
 
   - Voodoo
     - Expand maximum resolution for Banshee and Voodoo 3 from 1600x1280 to 1920x1440
@@ -105,6 +106,7 @@ Detailed change log :
     - Fixed Voodoo device compilation for big endian architectures
     - Fixed randomly missing color palette updates
     - Fixed Banshee read from ROM and mem_write() for any size and endianness
+    - Banshee: Implement 8 and 16 byte writes to CMDFIFO
 
   - CD-ROM:
     - Fix to enable TEAC CD-ROM driver to work
@@ -119,28 +121,27 @@ Detailed change log :
 
   - Floppy drive
     - Allows a choice of multiple FDC Controllers to emulate.
-       Using a compile time #define, you can choose a specified Controller type/manufacture to emulate.
+      Using a compile time #define, you can choose a specified Controller type/manufacture to emulate.
     - Added most all FDC supported commands.
-       Use the 'FDC_TYPE_BOCHS' type to support all commands.
-       Other types will only support their respected supported commands.
-       Commands of note: 'format & write', 'read track', 'part id', and corrected the 'version' command.
-       Did not add the 'Write Deleted Data' command, since there is no way to mark the emulated image
-        file as a deleted sector. The 'Read Deleted Data' command ignores the SK bit.
+      Use the 'FDC_TYPE_BOCHS' type to support all commands.
+      Other types will only support their respected supported commands.
+      Commands of note: 'format & write', 'read track', 'part id', and corrected the 'version' command.
+      Did not add the 'Write Deleted Data' command, since there is no way to mark the emulated image
+      file as a deleted sector. The 'Read Deleted Data' command ignores the SK bit.
     - Fixed and enhanced the Format command and function.
     - Fixed the Multi-track and EOT function.
-       A read/write/verify must stop at the end of a track (multi-track aware).
-    - fixed the cmos floppy type setting (config.cc::get_floppy_devtype_from_type())
-    - IGNORE_DEBUG_03F6: set this define so that the log file is not flooded with
-        reads/writes to this register by the harddrive code.
-    - changed a lot of hardcoded values to '#define's, especially with the switch/case blocks.
-    - the new command/result max size is now a #define (MAX_PHASE_SIZE)
-    - the SCANEQ/SCANLOWEQ/SCANHIGHEQ commands are untested. I don't have a 'real hardware' controller that
-       supports these commands. Even though the controller is a 82078, which specifies that it should
-       support these commands, it returns 'command unsupported'. If I find another controller type, I will
-       try that one. It would surprise me if any of them actually support this rarely used command.
-    - this new code fixes an error where Win98 and older Windows versions would set the high order 
-       drive select bit in error. This would specify drive 2 for drive 0, and drive 3 for drive 1.
-    - replaced the broken 82078 datasheet URL with one from the QEMU wiki. It should be static now.
+      A read/write/verify must stop at the end of a track (multi-track aware).
+    - Fixed the cmos floppy type setting (config.cc::get_floppy_devtype_from_type())
+    - IGNORE_DEBUG_03F6: set this define so that the log file is not flooded with reads/writes
+      to this register by the harddrive code.
+    - The new command/result max size is now a #define (MAX_PHASE_SIZE)
+    - The SCANEQ/SCANLOWEQ/SCANHIGHEQ commands are untested. I don't have a 'real hardware' controller that
+      supports these commands. Even though the controller is a 82078, which specifies that it should
+      support these commands, it returns 'command unsupported'. If I find another controller type, I will
+      try that one. It would surprise me if any of them actually support this rarely used command.
+    - This new code fixes an error where Win98 and older Windows versions would set the high order 
+      drive select bit in error. This would specify drive 2 for drive 0, and drive 3 for drive 1.
+    - Replaced the broken 82078 datasheet URL with one from the QEMU wiki. It should be static now.
 
   - USB
     - Added the ability to change interfaces (ex: BBB to UASP).
@@ -200,7 +201,7 @@ Detailed change log :
     - Align SB16 DMA buffer size to 4 to avoid crash in 16-bit stereo mode
     - Added 16-bit write support for even i/o addresses
 
-   - Keyboard/Mouse
+  - Keyboard/Mouse
     - Reduce default keyboard serial delay to 150 to avoid timeouts
 
 -BIOS / VGABIOS