Bochs/bochs/iodev/usb_common.cc

/////////////////////////////////////////////////////////////////////////
// $Id: usb_common.cc,v 1.13 2009-12-04 13:01:41 sshwarts Exp $
/////////////////////////////////////////////////////////////////////////
//
//  Copyright (C) 2009  Benjamin D Lunt (fys at frontiernet net)
//
//  This library is free software; you can redistribute it and/or
//  modify it under the terms of the GNU Lesser General Public
//  License as published by the Free Software Foundation; either
//  version 2 of the License, or (at your option) any later version.
//
//  This library is distributed in the hope that it will be useful,
//  but WITHOUT ANY WARRANTY; without even the implied warranty of
//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
//  Lesser General Public License for more details.
//
//  You should have received a copy of the GNU Lesser General Public
//  License along with this library; if not, write to the Free Software
//  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
/////////////////////////////////////////////////////////////////////////

// Experimental PCI USB adapter

/* Notes:
   - Currently, this code is quite messy.  This is for all of the debugging
     I have been doing.  Many BX_INFO()'s here and there.
   - My purpose of coding this emulation was/is to learn about the USB.
     It has been a challenge, but I have learned a lot.
   - If I forget, there are a lot of BX_INFO's that can be changed to BX_DEBUG's.
   - 31 July 2006:
     I now have a Beagle USB Protocol Analyzer from Total Phase for my research.
     (http://www.totalphase.com/products/beagle/usb/)
     With this device, I plan on doing a lot of research and development to get this
     code to a state where it is actually very useful.  I plan on adding support
     of many "plug-in" type modules so that you can simply add a plug-in for your
     specific device without having to modify the root code.
     I hope to have some working code to upload to the CVS as soon as possible.
     Thanks to Total Phase for their help in my research and the development of
     this project.
  */

// Define BX_PLUGGABLE in files that can be compiled into plugins.  For
// platforms that require a special tag on exported symbols, BX_PLUGGABLE
// is used to know when we are exporting symbols and when we are importing.
#define BX_PLUGGABLE

#include "iodev.h"

#if BX_SUPPORT_PCI && BX_SUPPORT_PCIUSB

#include "usb_common.h"
#include "usb_hid.h"
#include "usb_hub.h"
#include "usb_msd.h"
#include "usb_printer.h"

#define LOG_THIS

usbdev_type usb_init_device(const char *devname, logfunctions *hub, usb_device_c **device)
{
  usbdev_type type = USB_DEV_TYPE_NONE;
  int ports;

  if (!strcmp(devname, "mouse")) {
    type = USB_DEV_TYPE_MOUSE;
    *device = new usb_hid_device_c(type);
  } else if (!strcmp(devname, "tablet")) {
    type = USB_DEV_TYPE_TABLET;
    *device = new usb_hid_device_c(type);
  } else if (!strcmp(devname, "keypad")) {
    type = USB_DEV_TYPE_KEYPAD;
    *device = new usb_hid_device_c(type);
  } else if (!strncmp(devname, "disk", 4)) {
    if ((strlen(devname) > 5) && (devname[4] == ':')) {
      type = USB_DEV_TYPE_DISK;
      *device = new usb_msd_device_c(type, devname+5);
    } else {
      hub->panic("USB device 'disk' needs a filename separated with a colon");
      return type;
    }
  } else if (!strncmp(devname, "cdrom", 5)) {
    if ((strlen(devname) > 6) && (devname[5] == ':')) {
      type = USB_DEV_TYPE_CDROM;
      *device = new usb_msd_device_c(type, devname+6);
    } else {
      hub->panic("USB device 'cdrom' needs a filename separated with a colon");
      return type;
    }
  } else if (!strncmp(devname, "hub", 3)) {
    type = USB_DEV_TYPE_HUB;
    ports = 4;
    if (strlen(devname) > 3) {
      if (devname[3] == ':') {
        ports = atoi(&devname[4]);
        if ((ports < 2) || (ports > BX_N_USB_HUB_PORTS)) {
          hub->panic("USB device 'hub': invalid number of ports");
        }
      } else {
        hub->panic("USB device 'hub' needs the port count separated with a colon");
      }
    }
    *device = new usb_hub_device_c(ports);
  } else if (!strncmp(devname, "printer", 7)) {
    if ((strlen(devname) > 8) && (devname[7] == ':')) {
      type = USB_DEV_TYPE_PRINTER;
      *device = new usb_printer_device_c(type, devname+8);
    } else {
      hub->panic("USB device 'printer' needs a filename separated with a colon");
      return type;
    }
  } else {
    hub->panic("unknown USB device: %s", devname);
    return type;
  }
  return type;
}

// Dumps the contents of a buffer to the log file
void usb_device_c::usb_dump_packet(Bit8u *data, unsigned size)
{
  char the_packet[256], str[16];
  strcpy(the_packet, "Packet contents (in hex):");
  unsigned offset = 0;
  for (unsigned p=0; p<size; p++) {
    if (!(p & 0x0F)) {
      BX_DEBUG(("%s", the_packet));
      sprintf(the_packet, "  0x%04X ", offset);
      offset += 16;
    }
    sprintf(str, " %02X", data[p]);
    strcat(the_packet, str);
  }
  if (strlen(the_packet))
    BX_DEBUG(("%s", the_packet));
}

int usb_device_c::set_usb_string(Bit8u *buf, const char *str)
{
  size_t len, i;
  Bit8u *q;

  q = buf;
  len = strlen(str);
  if (len > 32) {
    *q = 0;
    return 0;
  }
  *q++ = 2 * len + 2;
  *q++ = 3;
  for(i = 0; i < len; i++) {
    *q++ = str[i];
    *q++ = 0;
  }
  return q - buf;
}

// generic USB packet handler

#define SETUP_STATE_IDLE 0
#define SETUP_STATE_DATA 1
#define SETUP_STATE_ACK  2

int usb_device_c::handle_packet(USBPacket *p)
{
  int l, ret = 0;
  int len = p->len;
  Bit8u *data = p->data;

  switch(p->pid) {
    case USB_MSG_ATTACH:
      d.state = USB_STATE_ATTACHED;
      break;
    case USB_MSG_DETACH:
      d.state = USB_STATE_NOTATTACHED;
      break;
    case USB_MSG_RESET:
      d.remote_wakeup = 0;
      d.addr = 0;
      d.state = USB_STATE_DEFAULT;
      handle_reset();
      break;
    case USB_TOKEN_SETUP:
      if (d.state < USB_STATE_DEFAULT || p->devaddr != d.addr)
        return USB_RET_NODEV;
      if (len != 8)
        goto fail;
      d.stall = 0;
      memcpy(d.setup_buf, data, 8);
      d.setup_len = (d.setup_buf[7] << 8) | d.setup_buf[6];
      d.setup_index = 0;
      if (d.setup_buf[0] & USB_DIR_IN) {
        ret = handle_control((d.setup_buf[0] << 8) | d.setup_buf[1],
                             (d.setup_buf[3] << 8) | d.setup_buf[2],
                             (d.setup_buf[5] << 8) | d.setup_buf[4],
                             d.setup_len, d.data_buf);
        if (ret < 0)
          return ret;
        if (ret < d.setup_len)
          d.setup_len = ret;
        d.setup_state = SETUP_STATE_DATA;
      } else {
        if (d.setup_len == 0)
          d.setup_state = SETUP_STATE_ACK;
        else
          d.setup_state = SETUP_STATE_DATA;
      }
      break;
    case USB_TOKEN_IN:
      if (d.state < USB_STATE_DEFAULT || p->devaddr != d.addr)
        return USB_RET_NODEV;
      if (d.stall) goto fail;
      switch(p->devep) {
        case 0:
          switch(d.setup_state) {
            case SETUP_STATE_ACK:
              if (!(d.setup_buf[0] & USB_DIR_IN)) {
                d.setup_state = SETUP_STATE_IDLE;
                ret = handle_control((d.setup_buf[0] << 8) | d.setup_buf[1],
                                     (d.setup_buf[3] << 8) | d.setup_buf[2],
                                     (d.setup_buf[5] << 8) | d.setup_buf[4],
                                     d.setup_len, d.data_buf);
                if (ret > 0)
                  ret = 0;
              } else {
                // return 0 byte
              }
              break;
            case SETUP_STATE_DATA:
              if (d.setup_buf[0] & USB_DIR_IN) {
                l = d.setup_len - d.setup_index;
                if (l > len)
                  l = len;
                memcpy(data, d.data_buf + d.setup_index, l);
                d.setup_index += l;
                if (d.setup_index >= d.setup_len)
                  d.setup_state = SETUP_STATE_ACK;
                ret = l;
              } else {
                d.setup_state = SETUP_STATE_IDLE;
                goto fail;
              }
              break;
            default:
                goto fail;
            }
            break;
        default:
            ret = handle_data(p);
            break;
        }
        break;
    case USB_TOKEN_OUT:
        if (d.state < USB_STATE_DEFAULT || p->devaddr != d.addr)
          return USB_RET_NODEV;
        if (d.stall) goto fail;
        switch(p->devep) {
        case 0:
          switch(d.setup_state) {
            case SETUP_STATE_ACK:
              if (d.setup_buf[0] & USB_DIR_IN) {
                d.setup_state = SETUP_STATE_IDLE;
                // transfer OK
              } else {
                // ignore additionnal output
              }
              break;
            case SETUP_STATE_DATA:
              if (!(d.setup_buf[0] & USB_DIR_IN)) {
                l = d.setup_len - d.setup_index;
                if (l > len)
                  l = len;
                memcpy(d.data_buf + d.setup_index, data, l);
                d.setup_index += l;
                if (d.setup_index >= d.setup_len)
                  d.setup_state = SETUP_STATE_ACK;
                ret = l;
              } else {
                // it is okay for a host to send an OUT before it reads
                //  all of the expected IN.  It is telling the controller
                //  that it doesn't want any more from that particular call.
                ret = 0;
                d.setup_state = SETUP_STATE_IDLE;
              }
              break;
            default:
              goto fail;
          }
          break;
        default:
          ret = handle_data(p);
          break;
      }
      break;
    default:
    fail:
      d.stall = 1;
      ret = USB_RET_STALL;
      break;
  }
  return ret;
}

void usb_device_c::register_state(bx_list_c *parent)
{
  bx_list_c *list = new bx_list_c(parent, "d", "Common USB Device State");
  new bx_shadow_num_c(list, "addr", &d.addr);
  new bx_shadow_num_c(list, "state", &d.state);
  new bx_shadow_num_c(list, "remote_wakeup", &d.remote_wakeup);
  register_state_specific(parent);
}

// base class for USB devices
usb_device_c::usb_device_c(void)
{
  memset((void*)&d, 0, sizeof(d));
}

// Send an internal message to a USB device
void usb_device_c::usb_send_msg(int msg)
{
  USBPacket p;
  memset(&p, 0, sizeof(p));
  p.pid = msg;
  handle_packet(&p);
}

#endif // BX_SUPPORT_PCI && BX_SUPPORT_PCIUSB