Bochs/bochs/iodev/pci2isa.cc

393 lines
11 KiB
C++
Raw Normal View History

/////////////////////////////////////////////////////////////////////////
// $Id: pci2isa.cc,v 1.22 2004-09-25 22:15:02 vruppert Exp $
/////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2002 MandrakeSoft S.A.
//
// MandrakeSoft S.A.
// 43, rue d'Aboukir
// 75002 Paris - France
// http://www.linux-mandrake.com/
// http://www.mandrakesoft.com/
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
// i440FX Support - PCI-to-ISA bridge (PIIX3)
//
// Define BX_PLUGGABLE in files that can be compiled into plugins. For
// platforms that require a special tag on exported symbols, BX_PLUGGABLE
// is used to know when we are exporting symbols and when we are importing.
#define BX_PLUGGABLE
#include "iodev.h"
#if BX_SUPPORT_PCI
- apply patch.ifdef-disabled-options. Comments from that patch are below: For a whole lot of configure options, I put #if...#endif around code that is specific to the option, even in files which are normally only compiled when the option is on. This allows me to create a MS Visual C++ 6.0 workspace that supports many of these options. The workspace will basically compile every file all the time, but the code for disabled options will be commented out by the #if...#endif. This may one day lead to simplification of the Makefiles and configure scripts, but for the moment I'm leaving Makefiles and configure scripts alone. Affected options: BX_SUPPORT_APIC (cpu/apic.cc) BX_SUPPORT_X86_64 (cpu/*64.cc) BX_DEBUGGER (debug/*) BX_DISASM (disasm/*) BX_WITH_nameofgui (gui/*) BX_SUPPORT_CDROM (iodev/cdrom.cc) BX_NE2K_SUPPORT (iodev/eth*.cc, iodev/ne2k.cc) BX_SUPPORT_APIC (iodev/ioapic.cc) BX_IODEBUG_SUPPORT (iodev/iodebug.cc) BX_PCI_SUPPORT (iodev/pci*.cc) BX_SUPPORT_SB16 (iodev/sb*.cc) Modified Files: cpu/apic.cc cpu/arith64.cc cpu/ctrl_xfer64.cc cpu/data_xfer64.cc cpu/fetchdecode64.cc cpu/logical64.cc cpu/mult64.cc cpu/resolve64.cc cpu/shift64.cc cpu/stack64.cc debug/Makefile.in debug/crc.cc debug/dbg_main.cc debug/lexer.l debug/linux.cc debug/parser.c debug/parser.y disasm/dis_decode.cc disasm/dis_groups.cc gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/macintosh.cc gui/rfb.cc gui/sdl.cc gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxmain.cc gui/x.cc iodev/cdrom.cc iodev/eth.cc iodev/eth_arpback.cc iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_packetmaker.cc iodev/eth_tap.cc iodev/eth_tuntap.cc iodev/eth_win32.cc iodev/ioapic.cc iodev/iodebug.cc iodev/ne2k.cc iodev/pci.cc iodev/pci2isa.cc iodev/sb16.cc iodev/soundlnx.cc iodev/soundwin.cc
2002-11-19 08:47:45 +03:00
#define LOG_THIS thePci2IsaBridge->
bx_pci2isa_c *thePci2IsaBridge = NULL;
int
libpci2isa_LTX_plugin_init(plugin_t *plugin, plugintype_t type, int argc, char *argv[])
{
thePci2IsaBridge = new bx_pci2isa_c ();
bx_devices.pluginPci2IsaBridge = thePci2IsaBridge;
BX_REGISTER_DEVICE_DEVMODEL(plugin, type, thePci2IsaBridge, BX_PLUGIN_PCI2ISA);
return(0); // Success
}
void
libpci2isa_LTX_plugin_fini(void)
{
}
bx_pci2isa_c::bx_pci2isa_c(void)
{
put("P2I");
settype(PCI2ISALOG);
}
bx_pci2isa_c::~bx_pci2isa_c(void)
{
// nothing for now
BX_DEBUG(("Exit."));
}
void
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
bx_pci2isa_c::init(void)
{
unsigned i;
// called once when bochs initializes
Bit8u devfunc = BX_PCI_DEVICE(1,0);
DEV_register_pci_handlers(this, pci_read_handler, pci_write_handler,
&devfunc, BX_PLUGIN_PCI2ISA, "PIIX3 PCI-to-ISA bridge");
DEV_register_iowrite_handler(this, write_handler, 0x00B2, "PIIX3 PCI-to-ISA bridge", 1);
DEV_register_iowrite_handler(this, write_handler, 0x00B3, "PIIX3 PCI-to-ISA bridge", 1);
DEV_register_iowrite_handler(this, write_handler, 0x04D0, "PIIX3 PCI-to-ISA bridge", 1);
DEV_register_iowrite_handler(this, write_handler, 0x04D1, "PIIX3 PCI-to-ISA bridge", 1);
DEV_register_iowrite_handler(this, write_handler, 0x0CF9, "PIIX3 PCI-to-ISA bridge", 1);
DEV_register_ioread_handler(this, read_handler, 0x00B2, "PIIX3 PCI-to-ISA bridge", 1);
DEV_register_ioread_handler(this, read_handler, 0x00B3, "PIIX3 PCI-to-ISA bridge", 1);
DEV_register_ioread_handler(this, read_handler, 0x04D0, "PIIX3 PCI-to-ISA bridge", 1);
DEV_register_ioread_handler(this, read_handler, 0x04D1, "PIIX3 PCI-to-ISA bridge", 1);
DEV_register_ioread_handler(this, read_handler, 0x0CF9, "PIIX3 PCI-to-ISA bridge", 1);
for (i=0; i<256; i++)
BX_P2I_THIS s.pci_conf[i] = 0x0;
for (i=0; i<16; i++)
BX_P2I_THIS s.irq_registry[i] = 0x0;
for (i=0; i<16; i++)
BX_P2I_THIS s.irq_level[i] = 0x0;
// readonly registers
BX_P2I_THIS s.pci_conf[0x00] = 0x86;
BX_P2I_THIS s.pci_conf[0x01] = 0x80;
BX_P2I_THIS s.pci_conf[0x02] = 0x00;
BX_P2I_THIS s.pci_conf[0x03] = 0x70;
BX_P2I_THIS s.pci_conf[0x0a] = 0x01;
BX_P2I_THIS s.pci_conf[0x0b] = 0x06;
BX_P2I_THIS s.pci_conf[0x0e] = 0x80;
// irq routing registers
BX_P2I_THIS s.pci_conf[0x60] = 0x80;
BX_P2I_THIS s.pci_conf[0x61] = 0x80;
BX_P2I_THIS s.pci_conf[0x62] = 0x80;
BX_P2I_THIS s.pci_conf[0x63] = 0x80;
}
void
bx_pci2isa_c::reset(unsigned type)
{
BX_P2I_THIS s.pci_conf[0x04] = 0x07;
BX_P2I_THIS s.pci_conf[0x05] = 0x00;
BX_P2I_THIS s.pci_conf[0x06] = 0x00;
BX_P2I_THIS s.pci_conf[0x07] = 0x02;
BX_P2I_THIS s.pci_conf[0x4c] = 0x4d;
BX_P2I_THIS s.pci_conf[0x4e] = 0x03;
BX_P2I_THIS s.pci_conf[0x4f] = 0x00;
BX_P2I_THIS s.pci_conf[0x69] = 0x02;
BX_P2I_THIS s.pci_conf[0x70] = 0x80;
BX_P2I_THIS s.pci_conf[0x76] = 0x0c;
BX_P2I_THIS s.pci_conf[0x77] = 0x0c;
BX_P2I_THIS s.pci_conf[0x78] = 0x02;
BX_P2I_THIS s.pci_conf[0x79] = 0x00;
BX_P2I_THIS s.pci_conf[0x80] = 0x00;
BX_P2I_THIS s.pci_conf[0x82] = 0x00;
BX_P2I_THIS s.pci_conf[0xa0] = 0x08;
BX_P2I_THIS s.pci_conf[0xa0] = 0x08;
BX_P2I_THIS s.pci_conf[0xa2] = 0x00;
BX_P2I_THIS s.pci_conf[0xa3] = 0x00;
BX_P2I_THIS s.pci_conf[0xa4] = 0x00;
BX_P2I_THIS s.pci_conf[0xa5] = 0x00;
BX_P2I_THIS s.pci_conf[0xa6] = 0x00;
BX_P2I_THIS s.pci_conf[0xa7] = 0x00;
BX_P2I_THIS s.pci_conf[0xa8] = 0x0f;
BX_P2I_THIS s.pci_conf[0xaa] = 0x00;
BX_P2I_THIS s.pci_conf[0xab] = 0x00;
BX_P2I_THIS s.pci_conf[0xac] = 0x00;
BX_P2I_THIS s.pci_conf[0xae] = 0x00;
for (unsigned i = 0; i < 4; i++) {
pci_set_irq(0x08, i+1, 0);
pci_unregister_irq(i);
}
BX_P2I_THIS s.elcr1 = 0x00;
BX_P2I_THIS s.elcr2 = 0x00;
BX_P2I_THIS s.pci_reset = 0x00;
}
void
bx_pci2isa_c::pci_register_irq(unsigned pirq, unsigned irq)
{
if ((irq < 16) && (((1 << irq) & 0xdef8) > 0)) {
if (BX_P2I_THIS s.pci_conf[0x60 + pirq] < 16) {
pci_unregister_irq(pirq);
}
BX_P2I_THIS s.pci_conf[0x60 + pirq] = irq;
if (!BX_P2I_THIS s.irq_registry[irq]) {
DEV_register_irq(irq, "PIIX3 IRQ routing");
}
BX_P2I_THIS s.irq_registry[irq] |= (1 << pirq);
}
}
void
bx_pci2isa_c::pci_unregister_irq(unsigned pirq)
{
Bit8u irq = BX_P2I_THIS s.pci_conf[0x60 + pirq];
if (irq < 16) {
BX_P2I_THIS s.irq_registry[irq] &= ~(1 << pirq);
if (!BX_P2I_THIS s.irq_registry[irq]) {
BX_P2I_THIS pci_set_irq(0x08, pirq+1, 0);
DEV_unregister_irq(irq, "PIIX3 IRQ routing");
}
BX_P2I_THIS s.pci_conf[0x60 + pirq] = 0x80;
}
}
void
bx_pci2isa_c::pci_set_irq(Bit8u devfunc, unsigned line, bx_bool level)
{
Bit8u pirq = ((devfunc >> 3) + line - 2) & 0x03;
Bit8u irq = BX_P2I_THIS s.pci_conf[0x60 + pirq];
if ((irq < 16) && (((1 << irq) & 0xdef8) > 0)) {
if (level == 1) {
if (!BX_P2I_THIS s.irq_level[irq]) {
DEV_pic_raise_irq(irq);
BX_DEBUG(("PIRQ%c -> IRQ %d = 1", pirq+65, irq));
}
BX_P2I_THIS s.irq_level[irq] |= (1 << (devfunc >> 3));
} else {
BX_P2I_THIS s.irq_level[irq] &= ~(1 << (devfunc >> 3));
if (!BX_P2I_THIS s.irq_level[irq]) {
DEV_pic_lower_irq(irq);
BX_DEBUG(("PIRQ%c -> IRQ %d = 0", pirq+65, irq));
}
}
}
}
// static IO port read callback handler
// redirects to non-static class handler to avoid virtual functions
Bit32u
bx_pci2isa_c::read_handler(void *this_ptr, Bit32u address, unsigned io_len)
{
#if !BX_USE_P2I_SMF
bx_pci2isa_c *class_ptr = (bx_pci2isa_c *) this_ptr;
return( class_ptr->read(address, io_len) );
}
Bit32u
bx_pci2isa_c::read(Bit32u address, unsigned io_len)
{
#else
UNUSED(this_ptr);
#endif // !BX_USE_P2I_SMF
switch (address) {
case 0x00b2:
BX_ERROR(("read: APM command register not supported yet"));
break;
case 0x00b3:
BX_ERROR(("read: APM status register not supported yet"));
break;
case 0x04d0:
return(BX_P2I_THIS s.elcr1);
break;
case 0x04d1:
return(BX_P2I_THIS s.elcr2);
break;
case 0x0cf9:
return(BX_P2I_THIS s.pci_reset);
break;
}
return(0xffffffff);
}
// static IO port write callback handler
// redirects to non-static class handler to avoid virtual functions
void
bx_pci2isa_c::write_handler(void *this_ptr, Bit32u address, Bit32u value, unsigned io_len)
{
#if !BX_USE_P2I_SMF
bx_pci2isa_c *class_ptr = (bx_pci2isa_c *) this_ptr;
class_ptr->write(address, value, io_len);
}
void
bx_pci2isa_c::write(Bit32u address, Bit32u value, unsigned io_len)
{
#else
UNUSED(this_ptr);
#endif // !BX_USE_P2I_SMF
switch (address) {
case 0x00b2:
BX_ERROR(("write: APM command register not supported yet"));
break;
case 0x00b3:
BX_ERROR(("write: APM status register not supported yet"));
break;
case 0x04d0:
value &= 0xf8;
if (value != BX_P2I_THIS s.elcr1) {
BX_P2I_THIS s.elcr1 = value;
BX_INFO(("write: ELCR1 = 0x%02x", BX_P2I_THIS s.elcr1));
DEV_pic_set_mode(0, BX_P2I_THIS s.elcr1);
}
break;
case 0x04d1:
value &= 0xde;
if (value != BX_P2I_THIS s.elcr2) {
BX_P2I_THIS s.elcr2 = value;
BX_INFO(("write: ELCR2 = 0x%02x", BX_P2I_THIS s.elcr2));
DEV_pic_set_mode(1, BX_P2I_THIS s.elcr2);
}
break;
case 0x0cf9:
BX_INFO(("write: CPU reset register = 0x%02x", value));
BX_P2I_THIS s.pci_reset = value & 0x02;
if (value & 0x04) {
if (BX_P2I_THIS s.pci_reset) {
bx_pc_system.Reset(BX_RESET_HARDWARE);
} else {
bx_pc_system.Reset(BX_RESET_SOFTWARE);
}
}
break;
}
}
// static pci configuration space read callback handler
// redirects to non-static class handler to avoid virtual functions
Bit32u
bx_pci2isa_c::pci_read_handler(void *this_ptr, Bit8u address, unsigned io_len)
{
#if !BX_USE_P2I_SMF
bx_pci2isa_c *class_ptr = (bx_pci2isa_c *) this_ptr;
return( class_ptr->pci_read(address, io_len) );
}
Bit32u
bx_pci2isa_c::pci_read(Bit8u address, unsigned io_len)
{
#else
UNUSED(this_ptr);
#endif // !BX_USE_P2I_SMF
Bit32u value = 0;
if (io_len <= 4) {
for (unsigned i=0; i<io_len; i++) {
value |= (BX_P2I_THIS s.pci_conf[address+i] << (i*8));
}
BX_DEBUG(("PIIX3 PCI-to-ISA read register 0x%02x value 0x%08x", address, value));
return value;
}
else
return(0xffffffff);
}
// static pci configuration space write callback handler
// redirects to non-static class handler to avoid virtual functions
void
bx_pci2isa_c::pci_write_handler(void *this_ptr, Bit8u address, Bit32u value, unsigned io_len)
{
#if !BX_USE_P2I_SMF
bx_pci2isa_c *class_ptr = (bx_pci2isa_c *) this_ptr;
class_ptr->pci_write(address, value, io_len);
}
void
bx_pci2isa_c::pci_write(Bit8u address, Bit32u value, unsigned io_len)
{
#else
UNUSED(this_ptr);
#endif // !BX_USE_P2I_SMF
Bit8u value8;
if ((address >= 0x10) && (address < 0x34))
return;
if (io_len <= 4) {
for (unsigned i=0; i<io_len; i++) {
value8 = (value >> (i*8)) & 0xFF;
switch (address+i) {
case 0x06:
break;
case 0x60:
case 0x61:
case 0x62:
case 0x63:
if (value8 != BX_P2I_THIS s.pci_conf[address+i]) {
if (value8 >= 0x80) {
pci_unregister_irq((address+i) & 0x03);
} else {
pci_register_irq((address+i) & 0x03, value8);
}
BX_INFO(("PCI IRQ routing: PIRQ%c# set to 0x%02x", address+i-31,
value8));
}
break;
default:
BX_P2I_THIS s.pci_conf[address+i] = value8;
BX_DEBUG(("PIIX3 PCI-to-ISA write register 0x%02x value 0x%02x", address,
value8));
}
}
}
}
- apply patch.ifdef-disabled-options. Comments from that patch are below: For a whole lot of configure options, I put #if...#endif around code that is specific to the option, even in files which are normally only compiled when the option is on. This allows me to create a MS Visual C++ 6.0 workspace that supports many of these options. The workspace will basically compile every file all the time, but the code for disabled options will be commented out by the #if...#endif. This may one day lead to simplification of the Makefiles and configure scripts, but for the moment I'm leaving Makefiles and configure scripts alone. Affected options: BX_SUPPORT_APIC (cpu/apic.cc) BX_SUPPORT_X86_64 (cpu/*64.cc) BX_DEBUGGER (debug/*) BX_DISASM (disasm/*) BX_WITH_nameofgui (gui/*) BX_SUPPORT_CDROM (iodev/cdrom.cc) BX_NE2K_SUPPORT (iodev/eth*.cc, iodev/ne2k.cc) BX_SUPPORT_APIC (iodev/ioapic.cc) BX_IODEBUG_SUPPORT (iodev/iodebug.cc) BX_PCI_SUPPORT (iodev/pci*.cc) BX_SUPPORT_SB16 (iodev/sb*.cc) Modified Files: cpu/apic.cc cpu/arith64.cc cpu/ctrl_xfer64.cc cpu/data_xfer64.cc cpu/fetchdecode64.cc cpu/logical64.cc cpu/mult64.cc cpu/resolve64.cc cpu/shift64.cc cpu/stack64.cc debug/Makefile.in debug/crc.cc debug/dbg_main.cc debug/lexer.l debug/linux.cc debug/parser.c debug/parser.y disasm/dis_decode.cc disasm/dis_groups.cc gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/macintosh.cc gui/rfb.cc gui/sdl.cc gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxmain.cc gui/x.cc iodev/cdrom.cc iodev/eth.cc iodev/eth_arpback.cc iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_packetmaker.cc iodev/eth_tap.cc iodev/eth_tuntap.cc iodev/eth_win32.cc iodev/ioapic.cc iodev/iodebug.cc iodev/ne2k.cc iodev/pci.cc iodev/pci2isa.cc iodev/sb16.cc iodev/soundlnx.cc iodev/soundwin.cc
2002-11-19 08:47:45 +03:00
#endif /* BX_SUPPORT_PCI */