Bochs/bochs/iodev/ioapic.cc

184 lines
5.1 KiB
C++
Raw Normal View History

/////////////////////////////////////////////////////////////////////////
// $Id: ioapic.cc,v 1.19 2005-06-04 17:44:58 vruppert Exp $
/////////////////////////////////////////////////////////////////////////
//
#include <stdio.h>
#include "iodev.h"
- apply patch.ifdef-disabled-options. Comments from that patch are below: For a whole lot of configure options, I put #if...#endif around code that is specific to the option, even in files which are normally only compiled when the option is on. This allows me to create a MS Visual C++ 6.0 workspace that supports many of these options. The workspace will basically compile every file all the time, but the code for disabled options will be commented out by the #if...#endif. This may one day lead to simplification of the Makefiles and configure scripts, but for the moment I'm leaving Makefiles and configure scripts alone. Affected options: BX_SUPPORT_APIC (cpu/apic.cc) BX_SUPPORT_X86_64 (cpu/*64.cc) BX_DEBUGGER (debug/*) BX_DISASM (disasm/*) BX_WITH_nameofgui (gui/*) BX_SUPPORT_CDROM (iodev/cdrom.cc) BX_NE2K_SUPPORT (iodev/eth*.cc, iodev/ne2k.cc) BX_SUPPORT_APIC (iodev/ioapic.cc) BX_IODEBUG_SUPPORT (iodev/iodebug.cc) BX_PCI_SUPPORT (iodev/pci*.cc) BX_SUPPORT_SB16 (iodev/sb*.cc) Modified Files: cpu/apic.cc cpu/arith64.cc cpu/ctrl_xfer64.cc cpu/data_xfer64.cc cpu/fetchdecode64.cc cpu/logical64.cc cpu/mult64.cc cpu/resolve64.cc cpu/shift64.cc cpu/stack64.cc debug/Makefile.in debug/crc.cc debug/dbg_main.cc debug/lexer.l debug/linux.cc debug/parser.c debug/parser.y disasm/dis_decode.cc disasm/dis_groups.cc gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/macintosh.cc gui/rfb.cc gui/sdl.cc gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxmain.cc gui/x.cc iodev/cdrom.cc iodev/eth.cc iodev/eth_arpback.cc iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_packetmaker.cc iodev/eth_tap.cc iodev/eth_tuntap.cc iodev/eth_win32.cc iodev/ioapic.cc iodev/iodebug.cc iodev/ne2k.cc iodev/pci.cc iodev/pci2isa.cc iodev/sb16.cc iodev/soundlnx.cc iodev/soundwin.cc
2002-11-19 08:47:45 +03:00
#if BX_SUPPORT_APIC
class bx_ioapic_c bx_ioapic;
#define LOG_THIS bx_ioapic.
void bx_io_redirect_entry_t::parse_value ()
{
dest = (Bit8u)((value >> 56) & APIC_ID_MASK);
masked = (Bit8u)((value >> 16) & 1);
trig_mode = (Bit8u)((value >> 15) & 1);
remote_irr = (Bit8u)((value >> 14) & 1);
polarity = (Bit8u)((value >> 13) & 1);
//delivery_status = (value >> 12) & 1;
delivery_status = 0; // we'll change this later...
dest_mode = (Bit8u)((value >> 11) & 1);
delivery_mode = (Bit8u)((value >> 8) & 7);
vector = (Bit8u)(value & 0xff);
}
void bx_io_redirect_entry_t::sprintf_self (char *buf)
{
sprintf (buf, "dest=%02x, masked=%d, trig_mode=%d, remote_irr=%d, polarity=%d, delivery_status=%d, dest_mode=%d, delivery_mode=%d, vector=%02x", dest, masked, trig_mode, remote_irr, polarity, delivery_status, dest_mode, delivery_mode, vector);
}
bx_ioapic_c::bx_ioapic_c ()
: bx_generic_apic_c ()
{
2001-06-27 23:16:01 +04:00
put("IOAP");
settype(IOAPICLOG);
}
bx_ioapic_c::~bx_ioapic_c () {}
void bx_ioapic_c::init ()
{
bx_generic_apic_c::init ();
BX_INFO(("initializing I/O APIC"));
base_addr = 0xfec00000;
set_id(BX_IOAPIC_DEFAULT_ID);
ioregsel = 0;
// all interrupts masked
for (int i=0; i<BX_IOAPIC_NUM_PINS; i++) {
ioredtbl[i].set_even_word (0x00010000);
ioredtbl[i].set_odd_word (0x00000000);
}
irr = 0;
}
void bx_ioapic_c::reset (unsigned type)
{
}
void bx_ioapic_c::read_aligned(Bit32u address, Bit32u *data, unsigned len)
{
BX_DEBUG( ("I/O APIC read_aligned addr=%08x, len=%d", address, len));
BX_ASSERT (len == 4);
address &= 0xff;
if (address == 0x00) {
// select register
*data = ioregsel;
return;
} else if (address != 0x10) {
BX_PANIC(("IOAPIC: read from unsupported address"));
}
// only reached when reading data register
switch (ioregsel) {
case 0x00: // APIC ID, note this is 4bits, the upper 4 are reserved
*data = ((id & APIC_ID_MASK) << 24);
return;
case 0x01: // version
*data = (((BX_IOAPIC_NUM_PINS-1) & 0xff) << 16)
| (BX_IOAPIC_VERSION_ID & 0x0f);
return;
case 0x02:
BX_INFO(("IOAPIC: arbitration ID unsupported, returned 0"));
*data = 0;
return;
default:
int index = (ioregsel - 0x10) >> 1;
if (index >= 0 && index < BX_IOAPIC_NUM_PINS) {
bx_io_redirect_entry_t *entry = ioredtbl + index;
*data = (ioregsel&1) ? entry->get_odd_word() : entry->get_even_word ();
return;
}
BX_PANIC(("IOAPIC: IOREGSEL points to undefined register %02x", ioregsel));
}
}
void bx_ioapic_c::write(Bit32u address, Bit32u *value, unsigned len)
{
BX_DEBUG(("IOAPIC: write addr=%08x, data=%08x, len=%d", address, *value, len));
address &= 0xff;
if (address == 0x00) {
ioregsel = *value;
return;
} else if (address != 0x10) {
BX_PANIC(("IOAPIC: write to unsupported address"));
}
// only reached when writing data register
switch (ioregsel) {
case 0x00: // set APIC ID
{
Bit8u newid = (*value >> 24) & APIC_ID_MASK;
BX_INFO(("IOAPIC: setting id to 0x%x", newid));
set_id (newid);
return;
}
case 0x01: // version
case 0x02: // arbitration id
BX_INFO(("IOAPIC: could not write, IOREGSEL=0x%02x", ioregsel));
return;
default:
int index = (ioregsel - 0x10) >> 1;
if (index >= 0 && index < BX_IOAPIC_NUM_PINS) {
bx_io_redirect_entry_t *entry = ioredtbl + index;
if (ioregsel&1)
entry->set_odd_word (*value);
else
entry->set_even_word (*value);
char buf[1024];
entry->sprintf_self (buf);
BX_DEBUG(("IOAPIC: now entry[%d] is %s", index, buf));
service_ioapic ();
return;
}
BX_PANIC(("IOAPIC: IOREGSEL points to undefined register %02x", ioregsel));
}
}
void bx_ioapic_c::raise_irq (unsigned vector, unsigned from)
{
BX_DEBUG(("IOAPIC: received vector %d", vector));
if ((vector >= 0) && (vector <= BX_APIC_LAST_VECTOR)) {
Bit32u bit = 1<<vector;
if ((irr & bit) == 0) {
irr |= bit;
service_ioapic ();
}
} else {
BX_PANIC(("IOAPIC: vector %d out of range", vector));
}
}
void bx_ioapic_c::lower_irq (unsigned num, unsigned from)
{
BX_DEBUG(("IOAPIC: interrupt %d went away", num));
}
void bx_ioapic_c::service_ioapic ()
{
static unsigned int stuck = 0;
// look in IRR and deliver any interrupts that are not masked.
BX_DEBUG(("IOAPIC: servicing"));
for (unsigned bit=0; bit < BX_IOAPIC_NUM_PINS; bit++) {
if (irr & (1<<bit)) {
bx_io_redirect_entry_t *entry = ioredtbl + bit;
entry->parse_value();
if (!entry->masked) {
// clear irr bit and deliver
- Apply patch.replace-Boolean rev 1.3. Every "Boolean" is now changed to a "bx_bool" which is always defined as Bit32u on all platforms. In Carbon specific code, Boolean is still used because the Carbon header files define it to unsigned char. - this fixes bug [ 623152 ] MacOSX: Triple Exception Booting win95. The bug was that some code in Bochs depends on Boolean to be a 32 bit value. (This should be fixed, but I don't know all the places where it needs to be fixed yet.) Because Carbon defined Boolean as an unsigned char, Bochs just followed along and used the unsigned char definition to avoid compile problems. This exposed the dependency on 32 bit Boolean on MacOS X only and led to major simulation problems, that could only be reproduced and debugged on that platform. - On the mailing list we debated whether to make all Booleans into "bool" or our own type. I chose bx_bool for several reasons. 1. Unlike C++'s bool, we can guarantee that bx_bool is the same size on all platforms, which makes it much less likely to have more platform-specific simulation differences in the future. (I spent hours on a borrowed MacOSX machine chasing bug 618388 before discovering that different sized Booleans were the problem, and I don't want to repeat that.) 2. We still have at least one dependency on 32 bit Booleans which must be fixed some time, but I don't want to risk introducing new bugs into the simulation just before the 2.0 release. Modified Files: bochs.h config.h.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h plugin.cc plugin.h bios/rombios.c cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith64.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer16.cc cpu/ctrl_xfer32.cc cpu/ctrl_xfer64.cc cpu/data_xfer16.cc cpu/data_xfer32.cc cpu/data_xfer64.cc cpu/debugstuff.cc cpu/exception.cc cpu/fetchdecode.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io_pro.cc cpu/lazy_flags.cc cpu/lazy_flags.h cpu/mult16.cc cpu/mult32.cc cpu/mult64.cc cpu/mult8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/segment_ctrl_pro.cc cpu/stack_pro.cc cpu/tasking.cc debug/dbg_main.cc debug/debug.h debug/sim2.cc disasm/dis_decode.cc disasm/disasm.h doc/docbook/Makefile docs-html/cosimulation.html fpu/wmFPUemu_glue.cc gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxmain.cc gui/wxmain.h gui/x.cc instrument/example0/instrument.cc instrument/example0/instrument.h instrument/example1/instrument.cc instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/cdrom.cc iodev/cdrom.h iodev/cdrom_osx.cc iodev/cmos.cc iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_arpback.cc iodev/eth_packetmaker.cc iodev/eth_packetmaker.h iodev/floppy.cc iodev/floppy.h iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/ioapic.cc iodev/ioapic.h iodev/iodebug.cc iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.h iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/serial.cc iodev/serial.h iodev/vga.cc iodev/vga.h memory/memory.h memory/misc_mem.cc
2002-10-25 15:44:41 +04:00
bx_bool done = deliver (entry->dest, entry->dest_mode, entry->delivery_mode, entry->vector, entry->polarity, entry->trig_mode);
if (done) {
irr &= ~(1<<bit);
entry->delivery_status = 0;
stuck = 0;
} else {
entry->delivery_status = 1;
stuck++;
if (stuck > 5)
BX_INFO(("vector %#x stuck?\n", entry->vector));
}
}
}
}
}
- apply patch.ifdef-disabled-options. Comments from that patch are below: For a whole lot of configure options, I put #if...#endif around code that is specific to the option, even in files which are normally only compiled when the option is on. This allows me to create a MS Visual C++ 6.0 workspace that supports many of these options. The workspace will basically compile every file all the time, but the code for disabled options will be commented out by the #if...#endif. This may one day lead to simplification of the Makefiles and configure scripts, but for the moment I'm leaving Makefiles and configure scripts alone. Affected options: BX_SUPPORT_APIC (cpu/apic.cc) BX_SUPPORT_X86_64 (cpu/*64.cc) BX_DEBUGGER (debug/*) BX_DISASM (disasm/*) BX_WITH_nameofgui (gui/*) BX_SUPPORT_CDROM (iodev/cdrom.cc) BX_NE2K_SUPPORT (iodev/eth*.cc, iodev/ne2k.cc) BX_SUPPORT_APIC (iodev/ioapic.cc) BX_IODEBUG_SUPPORT (iodev/iodebug.cc) BX_PCI_SUPPORT (iodev/pci*.cc) BX_SUPPORT_SB16 (iodev/sb*.cc) Modified Files: cpu/apic.cc cpu/arith64.cc cpu/ctrl_xfer64.cc cpu/data_xfer64.cc cpu/fetchdecode64.cc cpu/logical64.cc cpu/mult64.cc cpu/resolve64.cc cpu/shift64.cc cpu/stack64.cc debug/Makefile.in debug/crc.cc debug/dbg_main.cc debug/lexer.l debug/linux.cc debug/parser.c debug/parser.y disasm/dis_decode.cc disasm/dis_groups.cc gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/macintosh.cc gui/rfb.cc gui/sdl.cc gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxmain.cc gui/x.cc iodev/cdrom.cc iodev/eth.cc iodev/eth_arpback.cc iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_packetmaker.cc iodev/eth_tap.cc iodev/eth_tuntap.cc iodev/eth_win32.cc iodev/ioapic.cc iodev/iodebug.cc iodev/ne2k.cc iodev/pci.cc iodev/pci2isa.cc iodev/sb16.cc iodev/soundlnx.cc iodev/soundwin.cc
2002-11-19 08:47:45 +03:00
#endif /* if BX_SUPPORT_APIC */