Bochs/bochs/cpu/paging.cc

/////////////////////////////////////////////////////////////////////////
// $Id: paging.cc,v 1.123 2008-04-22 22:05:38 sshwarts Exp $
/////////////////////////////////////////////////////////////////////////
//
//  Copyright (C) 2001  MandrakeSoft S.A.
//
//    MandrakeSoft S.A.
//    43, rue d'Aboukir
//    75002 Paris - France
//    http://www.linux-mandrake.com/
//    http://www.mandrakesoft.com/
//
//  This library is free software; you can redistribute it and/or
//  modify it under the terms of the GNU Lesser General Public
//  License as published by the Free Software Foundation; either
//  version 2 of the License, or (at your option) any later version.
//
//  This library is distributed in the hope that it will be useful,
//  but WITHOUT ANY WARRANTY; without even the implied warranty of
//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
//  Lesser General Public License for more details.
//
//  You should have received a copy of the GNU Lesser General Public
//  License along with this library; if not, write to the Free Software
//  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
/////////////////////////////////////////////////////////////////////////

#define NEED_CPU_REG_SHORTCUTS 1
#include "bochs.h"
#include "cpu.h"
#define LOG_THIS BX_CPU_THIS_PTR

// X86 Registers Which Affect Paging:
// ==================================
//
// CR0:
//   bit 31: PG, Paging (386+)
//   bit 16: WP, Write Protect (486+)
//     0: allow   supervisor level writes into user level RO pages
//     1: inhibit supervisor level writes into user level RO pages
//
// CR3:
//   bit 31..12: PDBR, Page Directory Base Register (386+)
//   bit      4: PCD, Page level Cache Disable (486+)
//     Controls caching of current page directory.  Affects only the processor's
//     internal caches (L1 and L2).
//     This flag ignored if paging disabled (PG=0) or cache disabled (CD=1).
//     Values:
//       0: Page Directory can be cached
//       1: Page Directory not cached
//   bit      3: PWT, Page level Writes Transparent (486+)
//     Controls write-through or write-back caching policy of current page
//     directory.  Affects only the processor's internal caches (L1 and L2).
//     This flag ignored if paging disabled (PG=0) or cache disabled (CD=1).
//     Values:
//       0: write-back caching enabled
//       1: write-through caching enabled
//
// CR4:
//   bit 4: PSE, Page Size Extension (Pentium+)
//     0: 4KByte pages (typical)
//     1: 4MByte or 2MByte pages
//   bit 5: PAE, Physical Address Extension (Pentium Pro+)
//     0: 32bit physical addresses
//     1: 36bit physical addresses
//   bit 7: PGE, Page Global Enable (Pentium Pro+)
//     The global page feature allows frequently used or shared pages
//     to be marked as global (PDE or PTE bit 8).  Global pages are
//     not flushed from TLB on a task switch or write to CR3.
//     Values:
//       0: disables global page feature
//       1: enables global page feature
//
//    page size extention and physical address size extention matrix (legacy mode)
//   ==============================================================================
//   CR0.PG  CR4.PAE  CR4.PSE  PDPE.PS  PDE.PS | page size   physical address size
//   ==============================================================================
//      0       X        X       R         X   |   --          paging disabled
//      1       0        0       R         X   |   4K              32bits
//      1       0        1       R         0   |   4K              32bits
//      1       0        1       R         1   |   4M              32bits
//      1       1        X       R         0   |   4K              36bits
//      1       1        X       R         1   |   2M              36bits

//     page size extention and physical address size extention matrix (long mode)
//   ==============================================================================
//   CR0.PG  CR4.PAE  CR4.PSE  PDPE.PS  PDE.PS | page size   physical address size
//   ==============================================================================
//      1       1        X       0         0   |   4K              52bits
//      1       1        X       0         1   |   2M              52bits
//      1       1        X       1         -   |   1G              52bits


// Page Directory/Table Entry format when P=0:
// ===========================================
//
//   31.. 1: available
//        0: P=0

// Page Directory Entry format when P=1 (4-Kbyte Page Table):
// ==========================================================
//
//   31..12: page table base address
//   11.. 9: available
//        8: G (Pentium Pro+), 0=reserved otherwise
//        7: PS (Pentium+), 0=reserved otherwise
//        6: 0=reserved
//        5: A   (386+)
//        4: PCD (486+), 0=reserved otherwise
//        3: PWT (486+), 0=reserved otherwise
//        2: U/S (386+)
//        1: R/W (386+)
//        0: P=1 (386+)

// Page Table Entry format when P=1 (4-Kbyte Page):
// ================================================
//
//   63..63: NX                  |
//   62..52: available           | Long mode
//   51..32: page base address   |
//   31..12: page base address
//   11.. 9: available
//        8: G (Pentium Pro+), 0=reserved otherwise
//        7: PAT
//        6: D   (386+)
//        5: A   (386+)
//        4: PCD (486+), 0=reserved otherwise
//        3: PWT (486+), 0=reserved otherwise
//        2: U/S (386+)
//        1: R/W (386+)
//        0: P=1 (386+)

// Page Directory/Table Entry Fields Defined:
// ==========================================
// NX: No Execute
//   This bit controls the ability to execute code from all physical
//   pages mapped by the table entry.
//     0: Code can be executed from the mapped physical pages
//     1: Code cannot be executed
//   The NX bit can only be set when the no-execute page-protection
//   feature is enabled by setting EFER.NXE=1, If EFER.NXE=0, the
//   NX bit is treated as reserved. In this case, #PF occurs if the
//   NX bit is not cleared to zero.
//
// G: Global flag
//   Indiciates a global page when set.  When a page is marked
//   global and the PGE flag in CR4 is set, the page table or
//   directory entry for the page is not invalidated in the TLB
//   when CR3 is loaded or a task switch occurs.  Only software
//   clears and sets this flag.  For page directory entries that
//   point to page tables, this flag is ignored and the global
//   characteristics of a page are set in the page table entries.
//
// PS: Page Size flag
//   Only used in page directory entries.  When PS=0, the page
//   size is 4KBytes and the page directory entry points to a
//   page table.  When PS=1, the page size is 4MBytes for
//   normal 32-bit addressing and 2MBytes if extended physical
//   addressing.
//
// PAT: Page-Attribute Table
//   This bit is only present in the lowest level of the page
//   translation hierarchy. The PAT bit is the high-order bit
//   of a 3-bit index into the PAT register. The other two
//   bits involved in forming the index are the PCD and PWT
//   bits.
//
// D: Dirty bit:
//   Processor sets the Dirty bit in the 2nd-level page table before a
//   write operation to an address mapped by that page table entry.
//   Dirty bit in directory entries is undefined.
//
// A: Accessed bit:
//   Processor sets the Accessed bits in both levels of page tables before
//   a read/write operation to a page.
//
// PCD: Page level Cache Disable
//   Controls caching of individual pages or page tables.
//   This allows a per-page based mechanism to disable caching, for
//   those pages which contained memory mapped IO, or otherwise
//   should not be cached.  Processor ignores this flag if paging
//   is not used (CR0.PG=0) or the cache disable bit is set (CR0.CD=1).
//   Values:
//     0: page or page table can be cached
//     1: page or page table is not cached (prevented)
//
// PWT: Page level Write Through
//   Controls the write-through or write-back caching policy of individual
//   pages or page tables.  Processor ignores this flag if paging
//   is not used (CR0.PG=0) or the cache disable bit is set (CR0.CD=1).
//   Values:
//     0: write-back caching
//     1: write-through caching
//
// U/S: User/Supervisor level
//   0: Supervisor level - for the OS, drivers, etc.
//   1: User level - application code and data
//
// R/W: Read/Write access
//   0: read-only access
//   1: read/write access
//
// P: Present
//   0: Not present
//   1: Present
// ==========================================


// Combined page directory/page table protection:
// ==============================================
// There is one column for the combined effect on a 386
// and one column for the combined effect on a 486+ CPU.
//
// +----------------+-----------------+----------------+----------------+
// |  Page Directory|     Page Table  |   Combined 386 |  Combined 486+ |
// |Privilege  Type | Privilege  Type | Privilege  Type| Privilege  Type|
// |----------------+-----------------+----------------+----------------|
// |User       R    | User       R    | User       R   | User       R   |
// |User       R    | User       RW   | User       R   | User       R   |
// |User       RW   | User       R    | User       R   | User       R   |
// |User       RW   | User       RW   | User       RW  | User       RW  |
// |User       R    | Supervisor R    | User       R   | Supervisor RW  |
// |User       R    | Supervisor RW   | User       R   | Supervisor RW  |
// |User       RW   | Supervisor R    | User       R   | Supervisor RW  |
// |User       RW   | Supervisor RW   | User       RW  | Supervisor RW  |
// |Supervisor R    | User       R    | User       R   | Supervisor RW  |
// |Supervisor R    | User       RW   | User       R   | Supervisor RW  |
// |Supervisor RW   | User       R    | User       R   | Supervisor RW  |
// |Supervisor RW   | User       RW   | User       RW  | Supervisor RW  |
// |Supervisor R    | Supervisor R    | Supervisor RW  | Supervisor RW  |
// |Supervisor R    | Supervisor RW   | Supervisor RW  | Supervisor RW  |
// |Supervisor RW   | Supervisor R    | Supervisor RW  | Supervisor RW  |
// |Supervisor RW   | Supervisor RW   | Supervisor RW  | Supervisor RW  |
// +----------------+-----------------+----------------+----------------+

// Page Fault Error Code Format:
// =============================
//
// bits 31..4: Reserved
// bit  3: RSVD (Pentium Pro+)
//   0: fault caused by reserved bits set to 1 in a page directory
//      when the PSE or PAE flags in CR4 are set to 1
//   1: fault was not caused by reserved bit violation
// bit  2: U/S (386+)
//   0: fault originated when in supervior mode
//   1: fault originated when in user mode
// bit  1: R/W (386+)
//   0: access causing the fault was a read
//   1: access causing the fault was a write
// bit  0: P (386+)
//   0: fault caused by a nonpresent page
//   1: fault caused by a page level protection violation

// Some paging related notes:
// ==========================
//
// - When the processor is running in supervisor level, all pages are both
//   readable and writable (write-protect ignored).  When running at user
//   level, only pages which belong to the user level are accessible;
//   read/write & read-only are readable, read/write are writable.
//
// - If the Present bit is 0 in either level of page table, an
//   access which uses these entries will generate a page fault.
//
// - (A)ccess bit is used to report read or write access to a page
//   or 2nd level page table.
//
// - (D)irty bit is used to report write access to a page.
//
// - Processor running at CPL=0,1,2 maps to U/S=0
//   Processor running at CPL=3     maps to U/S=1
//
// - Pentium+ processors have separate TLB's for data and instruction caches
// - Pentium Pro+ processors maintain separate 4K and 4M TLBs.

#define BX_INVALID_TLB_ENTRY 0xffffffff

#if BX_CPU_LEVEL >= 4
#  define BX_PRIV_CHECK_SIZE 32
#else
#  define BX_PRIV_CHECK_SIZE 16
#endif

static unsigned priv_check[BX_PRIV_CHECK_SIZE];

// The 'priv_check' array is used to decide if the current access
// has the proper paging permissions.  An index is formed, based
// on parameters such as the access type and level, the write protect
// flag and values cached in the TLB.  The format of the index into this
// array is:
//
//   |4 |3 |2 |1 |0 |
//   |wp|us|us|rw|rw|
//    |  |  |  |  |
//    |  |  |  |  +---> r/w of current access
//    |  |  +--+------> u/s,r/w combined of page dir & table (cached)
//    |  +------------> u/s of current access
//    +---------------> Current CR0.WP value


// Each entry in the TLB cache has 3 entries:
//
//   lpf:         Linear Page Frame (page aligned linear address of page)
//     bits 32..12  Linear page frame.
//     bits 11...0  Invalidate index.
//
//   ppf:         Physical Page Frame (page aligned phy address of page)
//
//   hostPageAddr:
//                Host Page Frame address used for direct access to
//                the mem.vector[] space allocated for the guest physical
//                memory.  If this is zero, it means that a pointer
//                to the host space could not be generated, likely because
//                that page of memory is not standard memory (it might
//                be memory mapped IO, ROM, etc).
//
//   accessBits:
//
//     bit  31:     Page is a global page.
//
//       The following bits are used for a very efficient permissions
//       check.  The goal is to be able, using only the current privilege
//       level and access type, to determine if the page tables allow the
//       access to occur or at least should rewalk the page tables.  On
//       the first read access, permissions are set to only read, so a
//       rewalk is necessary when a subsequent write fails the tests.
//       This allows for the dirty bit to be set properly, but for the
//       test to be efficient.  Note that the CR0.WP flag is not present.
//       The values in the following flags is based on the current CR0.WP
//       value, necessitating a TLB flush when CR0.WP changes.
//
//       The test is:
//         OK = 0x01 << ( (W<<2) | CPL ) [W:1=write, 0=read]
//
//       Thus for reads, it is:
//         OK = 0x01 << (          CPL )
//       And for writes:
//         OK = 0x10 << (          CPL )
//
//     bit 15:       a Write from CPL=3 is OK
//     bit 14:       a Write from CPL=2 is OK
//     bit 13:       a Write from CPL=1 is OK
//     bit 12:       a Write from CPL=0 is OK
//
//     bit 11:       a Read  from CPL=3 is OK
//     bit 10:       a Read  from CPL=2 is OK
//     bit  9:       a Read  from CPL=1 is OK
//     bit  8:       a Read  from CPL=0 is OK
//
//       And the lowest bits are as above, except that they also indicate
//       that hostPageAddr is valid, so we do not separately need to test
//       that pointer against NULL.  These have smaller constants for us
//       to be able to use smaller encodings in the trace generators.  Note
//       that whenever bit n (n=0..7) is set, then also n+8 is set.
//       (The opposite is of course not true)
//
//     bit  7:      a Write from CPL=3 is OK, hostPageAddr is valid
//     bit  6:      a Write from CPL=2 is OK, hostPageAddr is valid
//     bit  5:      a Write from CPL=1 is OK, hostPageAddr is valid
//     bit  4:      a Write from CPL=0 is OK, hostPageAddr is valid
//
//     bit  3:      a Read  from CPL=3 is OK, hostPageAddr is valid
//     bit  2:      a Read  from CPL=2 is OK, hostPageAddr is valid
//     bit  1:      a Read  from CPL=1 is OK, hostPageAddr is valid
//     bit  0:      a Read  from CPL=0 is OK, hostPageAddr is valid
//

#define TLB_WriteUserOK       0x8000
#define TLB_WriteSysOK        0x7000
#define TLB_ReadUserOK        0x0800
#define TLB_ReadSysOK         0x0700
#define TLB_WriteUserPtrOK    0x0080
#define TLB_WriteSysPtrOK     0x0070
#define TLB_ReadUserPtrOK     0x0008
#define TLB_ReadSysPtrOK      0x0007

#define TLB_GlobalPage        0x80000000

// === TLB Instrumentation section ==============================

// Note: this is an approximation of what Peter Tattam had.

#define InstrumentTLB 0

#if InstrumentTLB
static unsigned tlbLookups=0;
static unsigned tlbMisses=0;
static unsigned tlbGlobalFlushes=0;
static unsigned tlbNonGlobalFlushes=0;

#define InstrTLB_StatsMask 0xfffff

#define InstrTLB_Stats() {\
  if ((tlbLookups & InstrTLB_StatsMask) == 0) { \
    BX_INFO(("TLB lookup:%8d miss:%8d %6.2f%% flush:%8d %6.2f%%", \
          tlbLookups, \
          tlbMisses, \
          tlbMisses * 100.0 / tlbLookups, \
          (tlbGlobalFlushes+tlbNonGlobalFlushes), \
          (tlbGlobalFlushes+tlbNonGlobalFlushes) * 100.0 / tlbLookups \
          )); \
    tlbLookups = tlbMisses = tlbGlobalFlushes = tlbNonGlobalFlushes = 0; \
    } \
  }
#define InstrTLB_Increment(v) (v)++

#else
#define InstrTLB_Stats()
#define InstrTLB_Increment(v)
#endif

// ==============================================================


  void BX_CPP_AttrRegparmN(2)
BX_CPU_C::pagingCR0Changed(Bit32u oldCR0, Bit32u newCR0)
{
  // Modification of PG,PE flushes TLB cache according to docs.
  // Additionally, the TLB strategy is based on the current value of
  // WP, so if that changes we must also flush the TLB.
  if ((oldCR0 & 0x80010001) != (newCR0 & 0x80010001))
    TLB_flush(1); // 1 = Flush Global entries also.

  if (bx_dbg.paging)
    BX_INFO(("pagingCR0Changed: (0x%x -> 0x%x)", oldCR0, newCR0));
}

  void BX_CPP_AttrRegparmN(2)
BX_CPU_C::pagingCR4Changed(Bit32u oldCR4, Bit32u newCR4)
{
  // Modification of PGE,PAE,PSE flushes TLB cache according to docs.
  if ((oldCR4 & 0x000000b0) != (newCR4 & 0x000000b0))
    TLB_flush(1); // 1 = Flush Global entries also.

  if (bx_dbg.paging)
    BX_INFO(("pagingCR4Changed: (0x%x -> 0x%x)", oldCR4, newCR4));

#if BX_SUPPORT_PAE
  if ((oldCR4 & 0x00000020) != (newCR4 & 0x00000020)) {
    if (BX_CPU_THIS_PTR cr4.get_PAE() && !long_mode())
      BX_CPU_THIS_PTR cr3_masked = BX_CPU_THIS_PTR cr3 & 0xffffffe0;
    else
      BX_CPU_THIS_PTR cr3_masked = BX_CPU_THIS_PTR cr3 & BX_CONST64(0x000ffffffffff000);
  }
#endif
}

  void BX_CPP_AttrRegparmN(1)
BX_CPU_C::CR3_change(bx_phy_address value)
{
  if (bx_dbg.paging) {
    BX_INFO(("CR3_change(): flush TLB cache"));
    BX_INFO(("Page Directory Base %08x", (unsigned) value));
  }

  // flush TLB even if value does not change
  TLB_flush(0); // 0 = Don't flush Global entries.
  BX_CPU_THIS_PTR cr3 = value;
#if BX_SUPPORT_PAE
  if (BX_CPU_THIS_PTR cr4.get_PAE() && !long_mode())
    BX_CPU_THIS_PTR cr3_masked = value & 0xffffffe0;
  else
#endif
    BX_CPU_THIS_PTR cr3_masked = value & BX_CONST64(0x000ffffffffff000);
}

// Called to initialize the TLB upon startup.
// Unconditional initialization of all TLB entries.
void BX_CPU_C::TLB_init(void)
{
  unsigned i, wp, us_combined, rw_combined, us_current, rw_current;

  for (i=0; i<BX_TLB_SIZE; i++)
    BX_CPU_THIS_PTR TLB.entry[i].lpf = BX_INVALID_TLB_ENTRY;

  //
  // Setup privilege check matrix.
  //
  for (i=0; i<BX_PRIV_CHECK_SIZE; i++) {
    wp          = (i & 0x10) >> 4;
    us_current  = (i & 0x08) >> 3;
    us_combined = (i & 0x04) >> 2;
    rw_combined = (i & 0x02) >> 1;
    rw_current  = (i & 0x01) >> 0;
    if (wp) { // when write protect on
      if (us_current > us_combined) // user access, supervisor page
        priv_check[i] = 0;
      else if (rw_current > rw_combined) // RW access, RO page
        priv_check[i] = 0;
      else
        priv_check[i] = 1;
    }
    else { // when write protect off
      if (us_current == 0) // Supervisor mode access, anything goes
        priv_check[i] = 1;
      else {
        // user mode access
        if (us_combined == 0) // user access, supervisor Page
          priv_check[i] = 0;
        else if (rw_current > rw_combined) // RW access, RO page
          priv_check[i] = 0;
        else
          priv_check[i] = 1;
      }
    }
  }
}

void BX_CPU_C::TLB_flush(bx_bool invalidateGlobal)
{
#if InstrumentTLB
  if (invalidateGlobal)
    InstrTLB_Increment(tlbGlobalFlushes);
  else
    InstrTLB_Increment(tlbNonGlobalFlushes);
#endif

  for (unsigned i=0; i<BX_TLB_SIZE; i++) {
    // To be conscious of the native cache line usage, only
    // write to (invalidate) entries which need it.
    bx_TLB_entry *tlbEntry = &BX_CPU_THIS_PTR TLB.entry[i];
    if (tlbEntry->lpf != BX_INVALID_TLB_ENTRY) {
#if BX_SUPPORT_GLOBAL_PAGES
      if (invalidateGlobal || !(tlbEntry->accessBits & TLB_GlobalPage))
#endif
        tlbEntry->lpf = BX_INVALID_TLB_ENTRY;
    }
  }
}

void BX_CPU_C::TLB_invlpg(bx_address laddr)
{
  unsigned TLB_index = BX_TLB_INDEX_OF(laddr, 0);
  BX_CPU_THIS_PTR TLB.entry[TLB_index].lpf = BX_INVALID_TLB_ENTRY;
}

void BX_CPP_AttrRegparmN(1) BX_CPU_C::INVLPG(bxInstruction_c* i)
{
#if BX_CPU_LEVEL >= 4
  invalidate_prefetch_q();

  if (!real_mode() && CPL!=0) {
    BX_ERROR(("INVLPG: priveledge check failed, generate #GP(0)"));
    exception(BX_GP_EXCEPTION, 0, 0);
  }

  BX_CPU_CALL_METHODR(i->ResolveModrm, (i));
  bx_address laddr = BX_CPU_THIS_PTR get_laddr(i->seg(), RMAddr(i));
  BX_INSTR_TLB_CNTRL(BX_CPU_ID, BX_INSTR_INVLPG, laddr);
  TLB_invlpg(laddr);
#else
  // not supported on < 486
  BX_INFO(("INVLPG: required i486, use --enable-cpu=4 option"));
  UndefinedOpcode(i);
#endif
}

// error checking order - page not present, reserved bits, protection
#define ERROR_NOT_PRESENT       0x00
#define ERROR_PROTECTION        0x01
#define ERROR_RESERVED          0x08
#define ERROR_CODE_ACCESS       0x10

void BX_CPU_C::page_fault(unsigned fault, bx_address laddr, unsigned user, unsigned rw, unsigned access_type)
{
  unsigned error_code = fault;

  error_code |= (user << 2) | (rw << 1);
#if BX_SUPPORT_X86_64
  if (BX_CPU_THIS_PTR efer.get_NXE() && (access_type == CODE_ACCESS))
    error_code |= ERROR_CODE_ACCESS; // I/D = 1
#endif
  BX_CPU_THIS_PTR cr2 = laddr;

  TLB_invlpg(laddr); // Invalidate TLB entry

#if BX_SUPPORT_X86_64
  BX_DEBUG(("page fault for address %08x%08x @ %08x%08x",
             GET32H(laddr), GET32L(laddr), GET32H(RIP), GET32L(RIP)));
#else
  BX_DEBUG(("page fault for address %08x @ %08x", laddr, EIP));
#endif

  exception(BX_PF_EXCEPTION, error_code, 0);
}

#define PAGING_PML4_RESERVED_BITS BX_CONST64(0x00000080)    /* bits 7 */
#define PAGING_PDPE_RESERVED_BITS BX_CONST64(0x00000080)    /* bits 7 - we not support 1G paging */

#define PAGE_DIRECTORY_NX_BIT (BX_CONST64(0x8000000000000000))

// Translate a linear address to a physical address
bx_phy_address BX_CPU_C::translate_linear(bx_address laddr, unsigned curr_pl, unsigned rw, unsigned access_type)
{
  Bit32u   accessBits, combined_access = 0;
  unsigned priv_index;

  // note - we assume physical memory < 4gig so for brevity & speed, we'll use
  // 32 bit entries although cr3 is expanded to 64 bits.
  bx_phy_address paddress, ppf, poffset = PAGE_OFFSET(laddr);
  bx_bool isWrite = (rw >= BX_WRITE); // write or r-m-w
  unsigned pl = (curr_pl == 3);

  InstrTLB_Increment(tlbLookups);
  InstrTLB_Stats();

  bx_address lpf = LPFOf(laddr);
  unsigned TLB_index = BX_TLB_INDEX_OF(lpf, 0);
  bx_TLB_entry *tlbEntry = &BX_CPU_THIS_PTR TLB.entry[TLB_index];

  // already looked up TLB for code access
  if (access_type != CODE_ACCESS && tlbEntry->lpf == lpf)
  {
    paddress   = tlbEntry->ppf | poffset;
    accessBits = tlbEntry->accessBits;

    if (accessBits & (0x0100 << ((isWrite<<2) | curr_pl)))
      return(paddress);

    // The current access does not have permission according to the info
    // in our TLB cache entry.  Re-walk the page tables, in case there is
    // updated information in the memory image, and let the long path code
    // generate an exception if one is warranted.
  }

#if BX_SUPPORT_X86_64
  BX_DEBUG(("page walk for address 0x%08x:%08x", GET32H(laddr), GET32L(laddr)));
#else
  BX_DEBUG(("page walk for address 0x%08x", laddr));
#endif

  InstrTLB_Increment(tlbMisses);

#if BX_SUPPORT_PAE
  if (BX_CPU_THIS_PTR cr4.get_PAE())
  {
    bx_phy_address pdpe_addr;
    Bit64u pdpe, pde, pte;
#if BX_SUPPORT_X86_64
    Bit64u pml4;
#endif
    unsigned nx_fault = 0;

#if BX_SUPPORT_X86_64
    if (long_mode()) {
      // Get PML4 entry
      bx_phy_address pml4_addr = (bx_phy_address)(BX_CPU_THIS_PTR cr3_masked |
                  ((laddr & BX_CONST64(0x0000ff8000000000)) >> 36));
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pml4_addr, 8, &pml4);
      BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pml4_addr, 8, BX_READ, (Bit8u*)(&pml4));

      if (!(pml4 & 0x01)) {
        BX_DEBUG(("PML4: entry not present"));
        page_fault(ERROR_NOT_PRESENT, laddr, pl, isWrite, access_type);
      }
      if (pml4 & PAGING_PML4_RESERVED_BITS) {
        BX_DEBUG(("PML4: reserved bit is set PML4=%08x:%08x", GET32H(pml4), GET32L(pml4)));
        page_fault(ERROR_RESERVED | ERROR_PROTECTION, laddr, pl, isWrite, access_type);
      }
      if (pml4 & PAGE_DIRECTORY_NX_BIT) {
        if (! BX_CPU_THIS_PTR efer.get_NXE()) {
          BX_DEBUG(("PML4: NX bit set when EFER.NXE is disabled"));
          page_fault(ERROR_RESERVED | ERROR_PROTECTION, laddr, pl, isWrite, access_type);
        }
        if (access_type == CODE_ACCESS) {
          BX_DEBUG(("PML4: non-executable page fault occured"));
          nx_fault = 1;
        }
      }
      if (pml4 & BX_CONST64(0x000fffff00000000)) {
        BX_PANIC(("PML4 0x%08x%08x: Only 32 bit physical address space is emulated !", GET32H(pml4), GET32L(pml4)));
      }

      if (!(pml4 & 0x20)) {
        pml4 |= 0x20;
        BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pml4_addr, 8, &pml4);
        BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pml4_addr, 8, BX_WRITE, (Bit8u*)(&pml4));
      }

      pdpe_addr = (bx_phy_address)((pml4 & BX_CONST64(0x000ffffffffff000)) |
                                 ((laddr & BX_CONST64(0x0000007fc0000000)) >> 27));
    }
    else
#endif
    {
      pdpe_addr = (bx_phy_address) (BX_CPU_THIS_PTR cr3_masked | ((laddr & 0xc0000000) >> 27));
    }

    BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pdpe_addr, 8, &pdpe);
    BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pdpe_addr, 8, BX_READ, (Bit8u*)(&pdpe));

    if (!(pdpe & 0x01)) {
      BX_DEBUG(("PAE PDPE: entry not present"));
      page_fault(ERROR_NOT_PRESENT, laddr, pl, isWrite, access_type);
    }
    if (pdpe & PAGING_PDPE_RESERVED_BITS) {
      BX_DEBUG(("PAE PDPE: reserved bit is set: PDPE=%08x:%08x", GET32H(pdpe), GET32L(pdpe)));
      page_fault(ERROR_RESERVED | ERROR_PROTECTION, laddr, pl, isWrite, access_type);
    }
#if BX_SUPPORT_X86_64
    if (pdpe & PAGE_DIRECTORY_NX_BIT) {
      if (! BX_CPU_THIS_PTR efer.get_NXE()) {
        BX_DEBUG(("PDPE: NX bit set when EFER.NXE is disabled"));
        page_fault(ERROR_RESERVED | ERROR_PROTECTION, laddr, pl, isWrite, access_type);
      }
      if (access_type == CODE_ACCESS) {
        BX_DEBUG(("PDPE: non-executable page fault occured"));
        nx_fault = 1;
      }
    }
#endif
    if (pdpe & BX_CONST64(0x000fffff00000000)) {
      BX_PANIC(("PAE PDPE 0x%08x%08x: Only 32 bit physical address space is emulated !", GET32H(pdpe), GET32L(pdpe)));
    }

    bx_phy_address pde_addr = (bx_phy_address)((pdpe & BX_CONST64(0x000ffffffffff000))
                          | ((laddr & 0x3fe00000) >> 18));

    BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pde_addr, 8, &pde);
    BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pde_addr, 8, BX_READ, (Bit8u*)(&pde));

    if (!(pde & 0x01)) {
      BX_DEBUG(("PAE PDE: entry not present"));
      page_fault(ERROR_NOT_PRESENT, laddr, pl, isWrite, access_type);
    }
#if BX_SUPPORT_X86_64
    if (pde & PAGE_DIRECTORY_NX_BIT) {
      if (! BX_CPU_THIS_PTR efer.get_NXE()) {
        BX_DEBUG(("PDE: NX bit set when EFER.NXE is disabled"));
        page_fault(ERROR_RESERVED | ERROR_PROTECTION, laddr, pl, isWrite, access_type);
      }
      if (access_type == CODE_ACCESS) {
        BX_DEBUG(("PDE: non-executable page fault occured"));
        nx_fault = 1;
      }
    }
#endif
    if (pde & BX_CONST64(0x000fffff00000000)) {
      BX_PANIC(("PAE PDE 0x%08x%08x: Only 32 bit physical address space is emulated !", GET32H(pde), GET32L(pde)));
    }

    // Ignore CR4.PSE in PAE mode
    if (pde & 0x80) {
      // Combined access is just access from the pde (no pte involved).
      combined_access = (pde) & 0x06; // U/S and R/W
#if BX_SUPPORT_X86_64
      if (long_mode()) {
        combined_access &= (pml4 & pdpe) & 0x06;
      }
#endif

      // Make up the physical page frame address.
      ppf = (bx_phy_address)((pde & BX_CONST64(0x000fffffffe00000)) | (laddr & 0x001ff000));

#if BX_SUPPORT_GLOBAL_PAGES
      if (BX_CPU_THIS_PTR cr4.get_PGE())
        combined_access |= (pde & TLB_GlobalPage); // G
#endif

      priv_index =
#if BX_CPU_LEVEL >= 4
        (BX_CPU_THIS_PTR cr0.get_WP() << 4) |  // bit 4
#endif
        (pl<<3) |                              // bit 3
        (combined_access & 0x06) |             // bit 2,1
        (isWrite);                             // bit 0

      if (!priv_check[priv_index] || nx_fault)
         page_fault(ERROR_PROTECTION, laddr, pl, isWrite, access_type);

      // Update PDPE A bit if needed.
      if (!(pdpe & 0x20)) {
        pdpe |= 0x20;
        BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pdpe_addr, 8, &pdpe);
        BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pdpe_addr, 8, BX_WRITE, (Bit8u*)(&pdpe));
      }

      // Update PDE A/D bits if needed.
      if (((pde & 0x20)==0) || (isWrite && ((pde & 0x40)==0))) {
        pde |= (0x20 | (isWrite<<6)); // Update A and possibly D bits
        BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pde_addr, 8, &pde);
        BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pde_addr, 8, BX_WRITE, (Bit8u*)(&pde));
      }
    }
    else {
      // 4k pages, Get page table entry
      bx_phy_address pte_addr = (bx_phy_address)((pde & BX_CONST64(0x000ffffffffff000)) |
                             ((laddr & 0x001ff000) >> 9));

      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pte_addr, 8, &pte);
      BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pte_addr, 8, BX_READ, (Bit8u*)(&pte));

      if (!(pte & 0x01)) {
        BX_DEBUG(("PAE PTE: entry not present"));
        page_fault(ERROR_NOT_PRESENT, laddr, pl, isWrite, access_type);
      }
#if BX_SUPPORT_X86_64
      if (pte & PAGE_DIRECTORY_NX_BIT) {
        if (! BX_CPU_THIS_PTR efer.get_NXE()) {
          BX_DEBUG(("PTE: NX bit set when EFER.NXE is disabled"));
          page_fault(ERROR_RESERVED | ERROR_PROTECTION, laddr, pl, isWrite, access_type);
        }
        if (access_type == CODE_ACCESS) {
          BX_DEBUG(("PTE: non-executable page fault occured"));
          nx_fault = 1;
        }
      }
#endif
      if (pte & BX_CONST64(0x000fffff00000000)) {
        BX_PANIC(("PAE PTE 0x%08x%08x: Only 32 bit physical address space is emulated !", GET32H(pte), GET32L(pte)));
      }

      combined_access = (pde & pte) & 0x06; // U/S and R/W
#if BX_SUPPORT_X86_64
      if (long_mode()) {
        combined_access &= (pml4 & pdpe) & 0x06;
      }
#endif

      // Make up the physical page frame address.
      ppf = (bx_phy_address)(pte & BX_CONST64(0x000ffffffffff000));

#if BX_SUPPORT_GLOBAL_PAGES
      if (BX_CPU_THIS_PTR cr4.get_PGE())
        combined_access |= (pte & TLB_GlobalPage); // G
#endif

      priv_index =
#if BX_CPU_LEVEL >= 4
        (BX_CPU_THIS_PTR cr0.get_WP() << 4) |  // bit 4
#endif
        (pl<<3) |                              // bit 3
        (combined_access & 0x06) |             // bit 2,1
        (isWrite);                             // bit 0

      if (!priv_check[priv_index] || nx_fault)
        page_fault(ERROR_PROTECTION, laddr, pl, isWrite, access_type);

      // Update PDPE A bit if needed.
      if (!(pdpe & 0x20)) {
        pdpe |= 0x20;
        BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pdpe_addr, 8, &pdpe);
        BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pdpe_addr, 8, BX_WRITE, (Bit8u*)(&pdpe));
      }

      // Update PDE A bit if needed.
      if (!(pde & 0x20)) {
        pde |= 0x20;
        BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pde_addr, 8, &pde);
        BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pde_addr, 8, BX_WRITE, (Bit8u*)(&pde));
      }

      // Update PTE A/D bits if needed.
      if (((pte & 0x20)==0) || (isWrite && ((pte & 0x40)==0))) {
        pte |= (0x20 | (isWrite<<6)); // Update A and possibly D bits
        BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pte_addr, 8, &pte);
        BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pte_addr, 8, BX_WRITE, (Bit8u*)(&pte));
      }
    }
  }
  else
#endif  // #if BX_SUPPORT_PAE
  {
    // CR4.PAE==0 (and EFER.LMA==0)
    Bit32u pde, pte;

    bx_phy_address pde_addr = (bx_phy_address) (BX_CPU_THIS_PTR cr3_masked |
                           ((laddr & 0xffc00000) >> 20));

    BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pde_addr, 4, &pde);
    BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pde_addr, 4, BX_READ, (Bit8u*)(&pde));

    if (!(pde & 0x01)) {
      BX_DEBUG(("PDE: entry not present"));
      page_fault(ERROR_NOT_PRESENT, laddr, pl, isWrite, access_type);
    }

#if BX_SUPPORT_LARGE_PAGES
    if ((pde & 0x80) && (BX_CPU_THIS_PTR cr4.get_PSE()))
    {
      // Note: when the PSE and PAE flags in CR4 are set, the
      //       processor generates a PF if the reserved bits are not zero.

      if (pde & 0x0001e000) {
        BX_PANIC(("PSE PDE 0x%08x: Only 32 bit physical address space is emulated !", pde));
      }

      // Combined access is just access from the pde (no pte involved).
      combined_access = pde & 0x06; // U/S and R/W
      // make up the physical frame number
      ppf = (pde & 0xffc00000) | (laddr & 0x003ff000);

#if BX_SUPPORT_GLOBAL_PAGES
      if (BX_CPU_THIS_PTR cr4.get_PGE())
        combined_access |= pde & TLB_GlobalPage; // {G}
#endif

      priv_index =
#if BX_CPU_LEVEL >= 4
        (BX_CPU_THIS_PTR cr0.get_WP() << 4) |  // bit 4
#endif
        (pl<<3) |                              // bit 3
        (combined_access & 0x06) |             // bit 2,1
        (isWrite);                             // bit 0

      if (!priv_check[priv_index])
        page_fault(ERROR_PROTECTION, laddr, pl, isWrite, access_type);

      // Update PDE A/D bits if needed.
      if (((pde & 0x20)==0) || (isWrite && ((pde & 0x40)==0))) {
        pde |= (0x20 | (isWrite<<6)); // Update A and possibly D bits
        BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pde_addr, 4, &pde);
        BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pde_addr, 4, BX_WRITE, (Bit8u*)(&pde));
      }
    }
    else // else normal 4K page...
#endif
    {
      // Get page table entry
      bx_phy_address pte_addr = (bx_phy_address)((pde & 0xfffff000) | ((laddr & 0x003ff000) >> 10));

      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pte_addr, 4, &pte);
      BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pte_addr, 4, BX_READ, (Bit8u*)(&pte));

      if (!(pte & 0x01)) {
        BX_DEBUG(("PTE: entry not present"));
        page_fault(ERROR_NOT_PRESENT, laddr, pl, isWrite, access_type);
      }

      // 386 and 486+ have different behaviour for combining
      // privilege from PDE and PTE.
#if BX_CPU_LEVEL == 3
      combined_access  = (pde | pte) & 0x04; // U/S
      combined_access |= (pde & pte) & 0x02; // R/W
#else // 486+
      combined_access  = (pde & pte) & 0x06; // U/S and R/W
#endif

      // Make up the physical page frame address.
      ppf = pte & 0xfffff000;

#if BX_SUPPORT_GLOBAL_PAGES
      if (BX_CPU_THIS_PTR cr4.get_PGE())
        combined_access |= (pte & TLB_GlobalPage); // G
#endif

      priv_index =
#if BX_CPU_LEVEL >= 4
        (BX_CPU_THIS_PTR cr0.get_WP() << 4) |  // bit 4
#endif
        (pl<<3) |                              // bit 3
        (combined_access & 0x06) |             // bit 2,1
        (isWrite);                             // bit 0

      if (!priv_check[priv_index])
        page_fault(ERROR_PROTECTION, laddr, pl, isWrite, access_type);

      // Update PDE A bit if needed.
      if (!(pde & 0x20)) {
        pde |= 0x20;
        BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pde_addr, 4, &pde);
        BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pde_addr, 4, BX_WRITE, (Bit8u*)(&pde));
      }

      // Update PTE A/D bits if needed.
      if (((pte & 0x20)==0) || (isWrite && ((pte & 0x40)==0))) {
        pte |= (0x20 | (isWrite<<6)); // Update A and possibly D bits
        BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, pte_addr, 4, &pte);
        BX_DBG_PHY_MEMORY_ACCESS(BX_CPU_ID, pte_addr, 4, BX_WRITE, (Bit8u*)(&pte));
      }
    }
  }

  // Calculate physical memory address and fill in TLB cache entry
  paddress = ppf | poffset;

  tlbEntry->lpf = lpf;
  tlbEntry->ppf = ppf;

  // b3: Write User  OK
  // b2: Write Sys   OK
  // b1: Read  User  OK
  // b0: Read  Sys   OK
  if (combined_access & 4) { // User
    // User priv; read from {user,sys} OK.
    accessBits = (TLB_ReadUserOK | TLB_ReadSysOK);
    if (isWrite) { // Current operation is a write (Dirty bit updated)
      if (combined_access & 2) {
         // R/W access from {user,sys} OK.
        accessBits |= (TLB_WriteUserOK | TLB_WriteSysOK);
      }
      else {
        accessBits |= TLB_WriteSysOK; // read only page, only {sys} write allowed
      }
    }
  }
  else { // System
    accessBits = TLB_ReadSysOK;     // System priv; read from {sys} OK.
    if (isWrite) {     // Current operation is a write (Dirty bit updated)
      accessBits |= TLB_WriteSysOK; // write from {sys} OK.
    }
  }
#if BX_SUPPORT_GLOBAL_PAGES
  accessBits |= combined_access & TLB_GlobalPage; // Global bit
#endif

#if BX_SupportGuest2HostTLB
  // Attempt to get a host pointer to this physical page. Put that
  // pointer in the TLB cache. Note if the request is vetoed, NULL
  // will be returned, and it's OK to OR zero in anyways.
  tlbEntry->hostPageAddr = (bx_hostpageaddr_t) BX_CPU_THIS_PTR mem->getHostMemAddr(BX_CPU_THIS,
       A20ADDR(ppf), rw, access_type);

  if (tlbEntry->hostPageAddr) {
    // All access allowed also via direct pointer
    accessBits |= (accessBits & 0xff00) >> 8;
  }
#endif
  tlbEntry->accessBits = accessBits;

  return paddress;
}

#if BX_DEBUGGER || BX_DISASM || BX_INSTRUMENTATION || BX_GDBSTUB

bx_bool BX_CPU_C::dbg_xlate_linear2phy(bx_address laddr, bx_phy_address *phy)
{
  if (BX_CPU_THIS_PTR cr0.get_PG() == 0) {
    *phy = (bx_phy_address) laddr;
    return 1;
  }

  bx_phy_address paddress;

  // see if page is in the TLB first
  bx_address lpf = LPFOf(laddr);
  unsigned TLB_index = BX_TLB_INDEX_OF(lpf, 0);
  bx_TLB_entry *tlbEntry  = &BX_CPU_THIS_PTR TLB.entry[TLB_index];

  if (tlbEntry->lpf == lpf) {
    paddress = tlbEntry->ppf | PAGE_OFFSET(laddr);
    *phy = paddress;
    return 1;
  }

  bx_phy_address pt_address = BX_CPU_THIS_PTR cr3_masked;
  bx_address offset_mask = 0xfff;

#if BX_SUPPORT_PAE
  if (BX_CPU_THIS_PTR cr4.get_PAE()) {
    int levels = 3;
#if BX_SUPPORT_X86_64
    if (long_mode())
      levels = 4;
#endif
    for (int level = levels - 1; level >= 0; --level) {
      Bit64u pte;
      pt_address += 8 * ((laddr >> (12 + 9*level)) & 511);
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pt_address, 8, &pte);
      if (!(pte & 1))
	goto page_fault;
      pt_address = (bx_phy_address)(pte & BX_CONST64(0x000ffffffffff000));
      if (level == 1 && (pte & 0x80)) { // PSE page
	offset_mask = 0x1fffff;
	break;
      }
    }
    paddress = pt_address + (bx_phy_address)(laddr & offset_mask);
  }
  else   // not PAE
#endif
  {
    for (int level = 1; level >= 0; --level) {
      Bit32u pte;
      pt_address += 4 * ((laddr >> (12 + 10*level)) & 1023);
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, pt_address, 4, &pte);
      if (!(pte & 1))
	goto page_fault;
      pt_address = pte & 0xfffff000;
      if (level == 1 && (pte & 0x80)) { // PSE page
	offset_mask = 0x3fffff;
	break;
      }
    }
    paddress = pt_address + (bx_phy_address)(laddr & offset_mask);
  }

  *phy = paddress;
  return 1;

page_fault:
  *phy = 0;
  return 0;
}
#endif

void BX_CPU_C::access_write_linear(bx_address laddr, unsigned len, unsigned curr_pl, void *data)
{
#if BX_X86_DEBUGGER
  hwbreakpoint_match(laddr, len, BX_WRITE);
#endif

  Bit32u pageOffset = PAGE_OFFSET(laddr);

  if (BX_CPU_THIS_PTR cr0.get_PG()) {
    /* check for reference across multiple pages */
    if ((pageOffset + len) <= 4096) {
      // Access within single page.
      BX_CPU_THIS_PTR address_xlation.paddress1 =
          dtranslate_linear(laddr, curr_pl, BX_WRITE);
      BX_CPU_THIS_PTR address_xlation.pages     = 1;

      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr, BX_CPU_THIS_PTR address_xlation.paddress1, len, BX_WRITE);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr, BX_CPU_THIS_PTR address_xlation.paddress1,
                          len, curr_pl, BX_WRITE, (Bit8u*) data);

      BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS,
          BX_CPU_THIS_PTR address_xlation.paddress1, len, data);
    }
    else {
      // access across 2 pages
      BX_CPU_THIS_PTR address_xlation.paddress1 =
          dtranslate_linear(laddr, curr_pl, BX_WRITE);
      BX_CPU_THIS_PTR address_xlation.len1 = 4096 - pageOffset;
      BX_CPU_THIS_PTR address_xlation.len2 = len -
          BX_CPU_THIS_PTR address_xlation.len1;
      BX_CPU_THIS_PTR address_xlation.pages     = 2;
      BX_CPU_THIS_PTR address_xlation.paddress2 =
          dtranslate_linear(laddr + BX_CPU_THIS_PTR address_xlation.len1,
                            curr_pl, BX_WRITE);

#ifdef BX_LITTLE_ENDIAN
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, BX_WRITE);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, curr_pl, 
          BX_WRITE, (Bit8u*) data);
      BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, data);
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, BX_WRITE);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, curr_pl, 
          BX_WRITE, ((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
      BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2,
          ((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
#else // BX_BIG_ENDIAN
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, BX_WRITE);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, curr_pl, 
          BX_WRITE, ((Bit8u*)data) + (len - BX_CPU_THIS_PTR address_xlation.len1));
      BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1,
          ((Bit8u*)data) + (len - BX_CPU_THIS_PTR address_xlation.len1));
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, BX_WRITE);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, curr_pl, 
          BX_WRITE, (Bit8u*) data);
      BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, data);
#endif
    }
  }
  else {
    // Paging off.
    if ((pageOffset + len) <= 4096) {
      // Access within single page.
      BX_CPU_THIS_PTR address_xlation.paddress1 = (bx_phy_address) laddr;
      BX_CPU_THIS_PTR address_xlation.pages     = 1;
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr, (bx_phy_address) laddr, len, BX_WRITE);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr, (bx_phy_address) laddr, len,
                          curr_pl, BX_WRITE, (Bit8u*) data);

#if BX_SupportGuest2HostTLB
      unsigned tlbIndex = BX_TLB_INDEX_OF(laddr, 0);
      bx_TLB_entry *tlbEntry = &BX_CPU_THIS_PTR TLB.entry[tlbIndex];
      bx_address lpf = LPFOf(laddr);

      if (tlbEntry->lpf == lpf) {
        BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, (bx_phy_address) laddr, len, data);
        return;
      }
      // We haven't seen this page, or it's been bumped before.

      tlbEntry->lpf = lpf;
      tlbEntry->ppf = (bx_phy_address) lpf;
      // TLB.entry[tlbIndex].ppf field not used for PG==0.
      // Request a direct write pointer so we can do either R or W.
      tlbEntry->hostPageAddr = (bx_hostpageaddr_t)
          BX_CPU_THIS_PTR mem->getHostMemAddr(BX_CPU_THIS, A20ADDR(lpf), BX_WRITE, DATA_ACCESS);

      if (tlbEntry->hostPageAddr) {
        // Got direct write pointer OK.  Mark for any operation to succeed.
        tlbEntry->accessBits = (TLB_ReadSysOK | TLB_ReadUserOK | TLB_WriteSysOK | TLB_WriteUserOK |
          TLB_ReadSysPtrOK | TLB_ReadUserPtrOK | TLB_WriteSysPtrOK | TLB_WriteUserPtrOK);
      }
      else
        tlbEntry->accessBits = 0;
#endif  // BX_SupportGuest2HostTLB

      BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS, (bx_phy_address) laddr, len, data);
    }
    else {
      // Access spans two pages.
      BX_CPU_THIS_PTR address_xlation.paddress1 = (bx_phy_address) laddr;
      BX_CPU_THIS_PTR address_xlation.len1 = 4096 - pageOffset;
      BX_CPU_THIS_PTR address_xlation.len2 = len -
          BX_CPU_THIS_PTR address_xlation.len1;
      BX_CPU_THIS_PTR address_xlation.pages     = 2;
      BX_CPU_THIS_PTR address_xlation.paddress2 = (bx_phy_address) (laddr +
          BX_CPU_THIS_PTR address_xlation.len1);

#ifdef BX_LITTLE_ENDIAN
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, BX_WRITE);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, curr_pl,
          BX_WRITE, (Bit8u*) data);
      BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, data);
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, BX_WRITE);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, curr_pl,
          BX_WRITE, ((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
      BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2,
          ((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
#else // BX_BIG_ENDIAN
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, BX_WRITE);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, curr_pl,
          BX_WRITE, ((Bit8u*)data) + (len - BX_CPU_THIS_PTR address_xlation.len1));
      BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1,
          ((Bit8u*)data) + (len - BX_CPU_THIS_PTR address_xlation.len1));
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, BX_WRITE);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, curr_pl,
          BX_WRITE, (Bit8u*) data);
      BX_CPU_THIS_PTR mem->writePhysicalPage(BX_CPU_THIS,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, data);
#endif
    }
  }
}

void BX_CPU_C::access_read_linear(bx_address laddr, unsigned len, unsigned curr_pl, unsigned xlate_rw, void *data)
{
  BX_ASSERT(xlate_rw == BX_READ || xlate_rw == BX_RW);

#if BX_X86_DEBUGGER
  hwbreakpoint_match(laddr, len, xlate_rw);
#endif

  Bit32u pageOffset = PAGE_OFFSET(laddr);

  if (BX_CPU_THIS_PTR cr0.get_PG()) {
    /* check for reference across multiple pages */
    if ((pageOffset + len) <= 4096) {
      // Access within single page.
      BX_CPU_THIS_PTR address_xlation.paddress1 =
          dtranslate_linear(laddr, curr_pl, xlate_rw);
      BX_CPU_THIS_PTR address_xlation.pages     = 1;
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS,
          BX_CPU_THIS_PTR address_xlation.paddress1, len, data);
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1, len, xlate_rw);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1, len, curr_pl,
          BX_READ, (Bit8u*) data);
    }
    else {
      // access across 2 pages
      BX_CPU_THIS_PTR address_xlation.paddress1 =
          dtranslate_linear(laddr, curr_pl, xlate_rw);
      BX_CPU_THIS_PTR address_xlation.len1 = 4096 - pageOffset;
      BX_CPU_THIS_PTR address_xlation.len2 = len -
          BX_CPU_THIS_PTR address_xlation.len1;
      BX_CPU_THIS_PTR address_xlation.pages     = 2;
      BX_CPU_THIS_PTR address_xlation.paddress2 =
          dtranslate_linear(laddr + BX_CPU_THIS_PTR address_xlation.len1,
                            curr_pl, xlate_rw);

#ifdef BX_LITTLE_ENDIAN
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, data);
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, xlate_rw);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, curr_pl,
          BX_READ, (Bit8u*) data);
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2,
          ((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, xlate_rw);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, curr_pl,
          BX_READ, ((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
#else // BX_BIG_ENDIAN
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1,
          ((Bit8u*)data) + (len - BX_CPU_THIS_PTR address_xlation.len1));
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, xlate_rw);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, curr_pl,
          BX_READ, ((Bit8u*)data) + (len - BX_CPU_THIS_PTR address_xlation.len1));
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, data);
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, xlate_rw);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, curr_pl,
          BX_READ, (Bit8u*) data);
#endif
    }
  }
  else {
    // Paging off.
    if ((pageOffset + len) <= 4096) {
      // Access within single page.
      BX_CPU_THIS_PTR address_xlation.paddress1 = (bx_phy_address) laddr;
      BX_CPU_THIS_PTR address_xlation.pages     = 1;
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr, (bx_phy_address) laddr, len, xlate_rw);

#if BX_SupportGuest2HostTLB
      unsigned tlbIndex = BX_TLB_INDEX_OF(laddr, 0);
      bx_TLB_entry *tlbEntry = &BX_CPU_THIS_PTR TLB.entry[tlbIndex];
      bx_address lpf = LPFOf(laddr);

      if (tlbEntry->lpf == lpf) {
        BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, (bx_phy_address) laddr, len, data);
        BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr, (bx_phy_address) laddr, len,
                          curr_pl, BX_READ, (Bit8u*) data);
        return;
      }
      // We haven't seen this page, or it's been bumped before.

      tlbEntry->lpf = lpf;
      tlbEntry->ppf = (bx_phy_address) lpf;
      // Request a direct write pointer so we can do either R or W.
      tlbEntry->hostPageAddr = (bx_hostpageaddr_t)
          BX_CPU_THIS_PTR mem->getHostMemAddr(BX_CPU_THIS, A20ADDR(lpf), BX_WRITE, DATA_ACCESS);
      if (! tlbEntry->hostPageAddr) {
        // Direct write vetoed.  Try requesting only direct reads.
        tlbEntry->hostPageAddr = (bx_hostpageaddr_t)
            BX_CPU_THIS_PTR mem->getHostMemAddr(BX_CPU_THIS, A20ADDR(lpf), BX_READ, DATA_ACCESS);
        if (tlbEntry->hostPageAddr) {
          // Got direct read pointer OK.
          tlbEntry->accessBits =
            (TLB_ReadSysOK | TLB_ReadUserOK | TLB_ReadSysPtrOK | TLB_ReadUserPtrOK);
        }
        else
          tlbEntry->accessBits = 0;
      }
      else {
        // Got direct write pointer OK.  Mark for any operation to succeed.
        tlbEntry->accessBits = (TLB_ReadSysOK | TLB_ReadUserOK | TLB_WriteSysOK | TLB_WriteUserOK |
          TLB_ReadSysPtrOK | TLB_ReadUserPtrOK | TLB_WriteSysPtrOK | TLB_WriteUserPtrOK);
      }
#endif  // BX_SupportGuest2HostTLB

      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS, (bx_phy_address) laddr, len, data);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr, (bx_phy_address) laddr, len,
                          curr_pl, BX_READ, (Bit8u*) data);
    }
    else {
      // Access spans two pages.
      BX_CPU_THIS_PTR address_xlation.paddress1 = (bx_phy_address) laddr;
      BX_CPU_THIS_PTR address_xlation.len1 = 4096 - pageOffset;
      BX_CPU_THIS_PTR address_xlation.len2 = len -
          BX_CPU_THIS_PTR address_xlation.len1;
      BX_CPU_THIS_PTR address_xlation.pages     = 2;
      BX_CPU_THIS_PTR address_xlation.paddress2 = (bx_phy_address) (laddr +
          BX_CPU_THIS_PTR address_xlation.len1);

#ifdef BX_LITTLE_ENDIAN
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, data);
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, xlate_rw);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, curr_pl,
          BX_READ, (Bit8u*) data);
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2,
          ((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, xlate_rw);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, curr_pl,
          BX_READ, ((Bit8u*)data) + BX_CPU_THIS_PTR address_xlation.len1);
#else // BX_BIG_ENDIAN
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1,
          ((Bit8u*)data) + (len - BX_CPU_THIS_PTR address_xlation.len1));
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, xlate_rw);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr,
          BX_CPU_THIS_PTR address_xlation.paddress1,
          BX_CPU_THIS_PTR address_xlation.len1, curr_pl,
          BX_READ, ((Bit8u*)data) + (len - BX_CPU_THIS_PTR address_xlation.len1));
      BX_CPU_THIS_PTR mem->readPhysicalPage(BX_CPU_THIS,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, data);
      BX_INSTR_LIN_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, xlate_rw);
      BX_DBG_LIN_MEMORY_ACCESS(BX_CPU_ID, laddr + BX_CPU_THIS_PTR address_xlation.len1,
          BX_CPU_THIS_PTR address_xlation.paddress2,
          BX_CPU_THIS_PTR address_xlation.len2, curr_pl,
          BX_READ, (Bit8u*) data);
#endif
    }
  }
}