839 lines
22 KiB
C
839 lines
22 KiB
C
/* vim: tabstop=4 shiftwidth=4 noexpandtab
|
|
* This file is part of ToaruOS and is released under the terms
|
|
* of the NCSA / University of Illinois License - see LICENSE.md
|
|
* Copyright (C) 2014 Kevin Lange
|
|
*
|
|
* ATA Disk Driver
|
|
*
|
|
* Provides raw block access to an (Parallel) ATA drive.
|
|
*/
|
|
|
|
#include <system.h>
|
|
#include <logging.h>
|
|
#include <module.h>
|
|
#include <fs.h>
|
|
#include <printf.h>
|
|
#include <list.h>
|
|
|
|
#include <pci.h>
|
|
|
|
/* TODO: Move this to mod/ata.h */
|
|
#include <ata.h>
|
|
|
|
static char ata_drive_char = 'a';
|
|
static int cdrom_number = 0;
|
|
static uint32_t ata_pci = 0x00000000;
|
|
static list_t * atapi_waiter;
|
|
static int atapi_in_progress = 0;
|
|
|
|
typedef union {
|
|
uint8_t command_bytes[12];
|
|
uint16_t command_words[6];
|
|
} atapi_command_t;
|
|
|
|
/* 8086:7010 */
|
|
static void find_ata_pci(uint32_t device, uint16_t vendorid, uint16_t deviceid, void * extra) {
|
|
if ((vendorid == 0x8086) && (deviceid == 0x7010 || deviceid == 0x7111)) {
|
|
*((uint32_t *)extra) = device;
|
|
}
|
|
}
|
|
|
|
typedef struct {
|
|
uintptr_t offset;
|
|
uint16_t bytes;
|
|
uint16_t last;
|
|
} prdt_t;
|
|
|
|
struct ata_device {
|
|
int io_base;
|
|
int control;
|
|
int slave;
|
|
int is_atapi;
|
|
ata_identify_t identity;
|
|
prdt_t * dma_prdt;
|
|
uintptr_t dma_prdt_phys;
|
|
uint8_t * dma_start;
|
|
uintptr_t dma_start_phys;
|
|
uint32_t bar4;
|
|
uint32_t atapi_lba;
|
|
uint32_t atapi_sector_size;
|
|
};
|
|
|
|
static struct ata_device ata_primary_master = {.io_base = 0x1F0, .control = 0x3F6, .slave = 0};
|
|
static struct ata_device ata_primary_slave = {.io_base = 0x1F0, .control = 0x3F6, .slave = 1};
|
|
static struct ata_device ata_secondary_master = {.io_base = 0x170, .control = 0x376, .slave = 0};
|
|
static struct ata_device ata_secondary_slave = {.io_base = 0x170, .control = 0x376, .slave = 1};
|
|
|
|
//static volatile uint8_t ata_lock = 0;
|
|
static spin_lock_t ata_lock = { 0 };
|
|
|
|
/* TODO support other sector sizes */
|
|
#define ATA_SECTOR_SIZE 512
|
|
|
|
static void ata_device_read_sector(struct ata_device * dev, uint32_t lba, uint8_t * buf);
|
|
static void ata_device_read_sector_atapi(struct ata_device * dev, uint32_t lba, uint8_t * buf);
|
|
static void ata_device_write_sector_retry(struct ata_device * dev, uint32_t lba, uint8_t * buf);
|
|
static uint32_t read_ata(fs_node_t *node, uint32_t offset, uint32_t size, uint8_t *buffer);
|
|
static uint32_t write_ata(fs_node_t *node, uint32_t offset, uint32_t size, uint8_t *buffer);
|
|
static void open_ata(fs_node_t *node, unsigned int flags);
|
|
static void close_ata(fs_node_t *node);
|
|
|
|
static uint64_t ata_max_offset(struct ata_device * dev) {
|
|
uint64_t sectors = dev->identity.sectors_48;
|
|
if (!sectors) {
|
|
/* Fall back to sectors_28 */
|
|
sectors = dev->identity.sectors_28;
|
|
}
|
|
|
|
return sectors * ATA_SECTOR_SIZE;
|
|
}
|
|
|
|
static uint64_t atapi_max_offset(struct ata_device * dev) {
|
|
uint64_t max_sector = dev->atapi_lba;
|
|
|
|
if (!max_sector) return 0;
|
|
|
|
return (max_sector + 1) * dev->atapi_sector_size;
|
|
}
|
|
|
|
static uint32_t read_ata(fs_node_t *node, uint32_t offset, uint32_t size, uint8_t *buffer) {
|
|
|
|
struct ata_device * dev = (struct ata_device *)node->device;
|
|
|
|
unsigned int start_block = offset / ATA_SECTOR_SIZE;
|
|
unsigned int end_block = (offset + size - 1) / ATA_SECTOR_SIZE;
|
|
|
|
unsigned int x_offset = 0;
|
|
|
|
if (offset > ata_max_offset(dev)) {
|
|
return 0;
|
|
}
|
|
|
|
if (offset + size > ata_max_offset(dev)) {
|
|
unsigned int i = ata_max_offset(dev) - offset;
|
|
size = i;
|
|
}
|
|
|
|
if (offset % ATA_SECTOR_SIZE) {
|
|
unsigned int prefix_size = (ATA_SECTOR_SIZE - (offset % ATA_SECTOR_SIZE));
|
|
char * tmp = malloc(ATA_SECTOR_SIZE);
|
|
ata_device_read_sector(dev, start_block, (uint8_t *)tmp);
|
|
|
|
memcpy(buffer, (void *)((uintptr_t)tmp + (offset % ATA_SECTOR_SIZE)), prefix_size);
|
|
|
|
free(tmp);
|
|
|
|
x_offset += prefix_size;
|
|
start_block++;
|
|
}
|
|
|
|
if ((offset + size) % ATA_SECTOR_SIZE && start_block <= end_block) {
|
|
unsigned int postfix_size = (offset + size) % ATA_SECTOR_SIZE;
|
|
char * tmp = malloc(ATA_SECTOR_SIZE);
|
|
ata_device_read_sector(dev, end_block, (uint8_t *)tmp);
|
|
|
|
memcpy((void *)((uintptr_t)buffer + size - postfix_size), tmp, postfix_size);
|
|
|
|
free(tmp);
|
|
|
|
end_block--;
|
|
}
|
|
|
|
while (start_block <= end_block) {
|
|
ata_device_read_sector(dev, start_block, (uint8_t *)((uintptr_t)buffer + x_offset));
|
|
x_offset += ATA_SECTOR_SIZE;
|
|
start_block++;
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
static uint32_t read_atapi(fs_node_t *node, uint32_t offset, uint32_t size, uint8_t *buffer) {
|
|
|
|
struct ata_device * dev = (struct ata_device *)node->device;
|
|
|
|
unsigned int start_block = offset / dev->atapi_sector_size;
|
|
unsigned int end_block = (offset + size - 1) / dev->atapi_sector_size;
|
|
|
|
unsigned int x_offset = 0;
|
|
|
|
if (offset > atapi_max_offset(dev)) {
|
|
return 0;
|
|
}
|
|
|
|
if (offset + size > atapi_max_offset(dev)) {
|
|
unsigned int i = atapi_max_offset(dev) - offset;
|
|
size = i;
|
|
}
|
|
|
|
if (offset % dev->atapi_sector_size) {
|
|
unsigned int prefix_size = (dev->atapi_sector_size - (offset % dev->atapi_sector_size));
|
|
char * tmp = malloc(dev->atapi_sector_size);
|
|
ata_device_read_sector_atapi(dev, start_block, (uint8_t *)tmp);
|
|
|
|
memcpy(buffer, (void *)((uintptr_t)tmp + (offset % dev->atapi_sector_size)), prefix_size);
|
|
|
|
free(tmp);
|
|
|
|
x_offset += prefix_size;
|
|
start_block++;
|
|
}
|
|
|
|
if ((offset + size) % dev->atapi_sector_size && start_block <= end_block) {
|
|
unsigned int postfix_size = (offset + size) % dev->atapi_sector_size;
|
|
char * tmp = malloc(dev->atapi_sector_size);
|
|
ata_device_read_sector_atapi(dev, end_block, (uint8_t *)tmp);
|
|
|
|
memcpy((void *)((uintptr_t)buffer + size - postfix_size), tmp, postfix_size);
|
|
|
|
free(tmp);
|
|
|
|
end_block--;
|
|
}
|
|
|
|
while (start_block <= end_block) {
|
|
ata_device_read_sector_atapi(dev, start_block, (uint8_t *)((uintptr_t)buffer + x_offset));
|
|
x_offset += dev->atapi_sector_size;
|
|
start_block++;
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
|
|
static uint32_t write_ata(fs_node_t *node, uint32_t offset, uint32_t size, uint8_t *buffer) {
|
|
struct ata_device * dev = (struct ata_device *)node->device;
|
|
|
|
unsigned int start_block = offset / ATA_SECTOR_SIZE;
|
|
unsigned int end_block = (offset + size - 1) / ATA_SECTOR_SIZE;
|
|
|
|
unsigned int x_offset = 0;
|
|
|
|
if (offset > ata_max_offset(dev)) {
|
|
return 0;
|
|
}
|
|
|
|
if (offset + size > ata_max_offset(dev)) {
|
|
unsigned int i = ata_max_offset(dev) - offset;
|
|
size = i;
|
|
}
|
|
|
|
if (offset % ATA_SECTOR_SIZE) {
|
|
unsigned int prefix_size = (ATA_SECTOR_SIZE - (offset % ATA_SECTOR_SIZE));
|
|
|
|
char * tmp = malloc(ATA_SECTOR_SIZE);
|
|
ata_device_read_sector(dev, start_block, (uint8_t *)tmp);
|
|
|
|
debug_print(NOTICE, "Writing first block");
|
|
|
|
memcpy((void *)((uintptr_t)tmp + (offset % ATA_SECTOR_SIZE)), buffer, prefix_size);
|
|
ata_device_write_sector_retry(dev, start_block, (uint8_t *)tmp);
|
|
|
|
free(tmp);
|
|
x_offset += prefix_size;
|
|
start_block++;
|
|
}
|
|
|
|
if ((offset + size) % ATA_SECTOR_SIZE && start_block <= end_block) {
|
|
unsigned int postfix_size = (offset + size) % ATA_SECTOR_SIZE;
|
|
|
|
char * tmp = malloc(ATA_SECTOR_SIZE);
|
|
ata_device_read_sector(dev, end_block, (uint8_t *)tmp);
|
|
|
|
debug_print(NOTICE, "Writing last block");
|
|
|
|
memcpy(tmp, (void *)((uintptr_t)buffer + size - postfix_size), postfix_size);
|
|
|
|
ata_device_write_sector_retry(dev, end_block, (uint8_t *)tmp);
|
|
|
|
free(tmp);
|
|
end_block--;
|
|
}
|
|
|
|
while (start_block <= end_block) {
|
|
ata_device_write_sector_retry(dev, start_block, (uint8_t *)((uintptr_t)buffer + x_offset));
|
|
x_offset += ATA_SECTOR_SIZE;
|
|
start_block++;
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
static void open_ata(fs_node_t * node, unsigned int flags) {
|
|
return;
|
|
}
|
|
|
|
static void close_ata(fs_node_t * node) {
|
|
return;
|
|
}
|
|
|
|
static fs_node_t * atapi_device_create(struct ata_device * device) {
|
|
fs_node_t * fnode = malloc(sizeof(fs_node_t));
|
|
memset(fnode, 0x00, sizeof(fs_node_t));
|
|
fnode->inode = 0;
|
|
sprintf(fnode->name, "cdrom%d", cdrom_number);
|
|
fnode->device = device;
|
|
fnode->uid = 0;
|
|
fnode->gid = 0;
|
|
fnode->length = atapi_max_offset(device);
|
|
fnode->flags = FS_BLOCKDEVICE;
|
|
fnode->read = read_atapi;
|
|
fnode->write = NULL; /* no write support */
|
|
fnode->open = open_ata;
|
|
fnode->close = close_ata;
|
|
fnode->readdir = NULL;
|
|
fnode->finddir = NULL;
|
|
fnode->ioctl = NULL; /* TODO, identify, etc? */
|
|
return fnode;
|
|
}
|
|
|
|
|
|
static fs_node_t * ata_device_create(struct ata_device * device) {
|
|
fs_node_t * fnode = malloc(sizeof(fs_node_t));
|
|
memset(fnode, 0x00, sizeof(fs_node_t));
|
|
fnode->inode = 0;
|
|
sprintf(fnode->name, "atadev%d", ata_drive_char - 'a');
|
|
fnode->device = device;
|
|
fnode->uid = 0;
|
|
fnode->gid = 0;
|
|
fnode->length = ata_max_offset(device); /* TODO */
|
|
fnode->flags = FS_BLOCKDEVICE;
|
|
fnode->read = read_ata;
|
|
fnode->write = write_ata;
|
|
fnode->open = open_ata;
|
|
fnode->close = close_ata;
|
|
fnode->readdir = NULL;
|
|
fnode->finddir = NULL;
|
|
fnode->ioctl = NULL; /* TODO, identify, etc? */
|
|
return fnode;
|
|
}
|
|
|
|
static void ata_io_wait(struct ata_device * dev) {
|
|
inportb(dev->io_base + ATA_REG_ALTSTATUS);
|
|
inportb(dev->io_base + ATA_REG_ALTSTATUS);
|
|
inportb(dev->io_base + ATA_REG_ALTSTATUS);
|
|
inportb(dev->io_base + ATA_REG_ALTSTATUS);
|
|
}
|
|
|
|
static int ata_status_wait(struct ata_device * dev, int timeout) {
|
|
int status;
|
|
if (timeout > 0) {
|
|
int i = 0;
|
|
while ((status = inportb(dev->io_base + ATA_REG_STATUS)) & ATA_SR_BSY && (i < timeout)) i++;
|
|
} else {
|
|
while ((status = inportb(dev->io_base + ATA_REG_STATUS)) & ATA_SR_BSY);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int ata_wait(struct ata_device * dev, int advanced) {
|
|
uint8_t status = 0;
|
|
|
|
ata_io_wait(dev);
|
|
|
|
status = ata_status_wait(dev, -1);
|
|
|
|
if (advanced) {
|
|
status = inportb(dev->io_base + ATA_REG_STATUS);
|
|
if (status & ATA_SR_ERR) return 1;
|
|
if (status & ATA_SR_DF) return 1;
|
|
if (!(status & ATA_SR_DRQ)) return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ata_soft_reset(struct ata_device * dev) {
|
|
outportb(dev->control, 0x04);
|
|
ata_io_wait(dev);
|
|
outportb(dev->control, 0x00);
|
|
}
|
|
|
|
static int ata_irq_handler(struct regs *r) {
|
|
inportb(ata_primary_master.io_base + ATA_REG_STATUS);
|
|
if (atapi_in_progress) {
|
|
wakeup_queue(atapi_waiter);
|
|
}
|
|
irq_ack(14);
|
|
return 1;
|
|
}
|
|
|
|
static int ata_irq_handler_s(struct regs *r) {
|
|
inportb(ata_secondary_master.io_base + ATA_REG_STATUS);
|
|
if (atapi_in_progress) {
|
|
wakeup_queue(atapi_waiter);
|
|
}
|
|
irq_ack(15);
|
|
return 1;
|
|
}
|
|
|
|
static void ata_device_init(struct ata_device * dev) {
|
|
|
|
debug_print(NOTICE, "Initializing IDE device on bus %d", dev->io_base);
|
|
|
|
outportb(dev->io_base + 1, 1);
|
|
outportb(dev->control, 0);
|
|
|
|
outportb(dev->io_base + ATA_REG_HDDEVSEL, 0xA0 | dev->slave << 4);
|
|
ata_io_wait(dev);
|
|
|
|
outportb(dev->io_base + ATA_REG_COMMAND, ATA_CMD_IDENTIFY);
|
|
ata_io_wait(dev);
|
|
|
|
int status = inportb(dev->io_base + ATA_REG_COMMAND);
|
|
debug_print(INFO, "Device status: %d", status);
|
|
|
|
ata_wait(dev, 0);
|
|
|
|
uint16_t * buf = (uint16_t *)&dev->identity;
|
|
|
|
for (int i = 0; i < 256; ++i) {
|
|
buf[i] = inports(dev->io_base);
|
|
}
|
|
|
|
uint8_t * ptr = (uint8_t *)&dev->identity.model;
|
|
for (int i = 0; i < 39; i+=2) {
|
|
uint8_t tmp = ptr[i+1];
|
|
ptr[i+1] = ptr[i];
|
|
ptr[i] = tmp;
|
|
}
|
|
|
|
dev->is_atapi = 0;
|
|
|
|
debug_print(NOTICE, "Device Name: %s", dev->identity.model);
|
|
debug_print(NOTICE, "Sectors (48): %d", (uint32_t)dev->identity.sectors_48);
|
|
debug_print(NOTICE, "Sectors (24): %d", dev->identity.sectors_28);
|
|
|
|
debug_print(NOTICE, "Setting up DMA...");
|
|
dev->dma_prdt = (void *)kvmalloc_p(sizeof(prdt_t) * 1, &dev->dma_prdt_phys);
|
|
dev->dma_start = (void *)kvmalloc_p(4096, &dev->dma_start_phys);
|
|
|
|
debug_print(NOTICE, "Putting prdt at 0x%x (0x%x phys)", dev->dma_prdt, dev->dma_prdt_phys);
|
|
debug_print(NOTICE, "Putting prdt[0] at 0x%x (0x%x phys)", dev->dma_start, dev->dma_start_phys);
|
|
|
|
dev->dma_prdt[0].offset = dev->dma_start_phys;
|
|
dev->dma_prdt[0].bytes = 512;
|
|
dev->dma_prdt[0].last = 0x8000;
|
|
|
|
debug_print(NOTICE, "ATA PCI device ID: 0x%x", ata_pci);
|
|
|
|
uint16_t command_reg = pci_read_field(ata_pci, PCI_COMMAND, 4);
|
|
debug_print(NOTICE, "COMMAND register before: 0x%4x", command_reg);
|
|
if (command_reg & (1 << 2)) {
|
|
debug_print(NOTICE, "Bus mastering already enabled.");
|
|
} else {
|
|
command_reg |= (1 << 2); /* bit 2 */
|
|
debug_print(NOTICE, "Enabling bus mastering...");
|
|
pci_write_field(ata_pci, PCI_COMMAND, 4, command_reg);
|
|
command_reg = pci_read_field(ata_pci, PCI_COMMAND, 4);
|
|
debug_print(NOTICE, "COMMAND register after: 0x%4x", command_reg);
|
|
}
|
|
|
|
dev->bar4 = pci_read_field(ata_pci, PCI_BAR4, 4);
|
|
debug_print(NOTICE, "BAR4: 0x%x", dev->bar4);
|
|
|
|
if (dev->bar4 & 0x00000001) {
|
|
dev->bar4 = dev->bar4 & 0xFFFFFFFC;
|
|
} else {
|
|
debug_print(WARNING, "? ATA bus master registers are /usually/ I/O ports.\n");
|
|
return; /* No DMA because we're not sure what to do here */
|
|
}
|
|
|
|
#if 0
|
|
pci_write_field(ata_pci, PCI_INTERRUPT_LINE, 1, 0xFE);
|
|
if (pci_read_field(ata_pci, PCI_INTERRUPT_LINE, 1) == 0xFE) {
|
|
/* needs assignment */
|
|
pci_write_field(ata_pci, PCI_INTERRUPT_LINE, 1, 14);
|
|
}
|
|
#endif
|
|
|
|
}
|
|
|
|
static void atapi_device_init(struct ata_device * dev) {
|
|
|
|
dev->is_atapi = 1;
|
|
|
|
outportb(dev->io_base + 1, 1);
|
|
outportb(dev->control, 0);
|
|
|
|
outportb(dev->io_base + ATA_REG_HDDEVSEL, 0xA0 | dev->slave << 4);
|
|
ata_io_wait(dev);
|
|
|
|
outportb(dev->io_base + ATA_REG_COMMAND, ATA_CMD_IDENTIFY_PACKET);
|
|
ata_io_wait(dev);
|
|
|
|
int status = inportb(dev->io_base + ATA_REG_COMMAND);
|
|
debug_print(INFO, "Device status: %d", status);
|
|
|
|
ata_wait(dev, 0);
|
|
|
|
uint16_t * buf = (uint16_t *)&dev->identity;
|
|
|
|
for (int i = 0; i < 256; ++i) {
|
|
buf[i] = inports(dev->io_base);
|
|
}
|
|
|
|
uint8_t * ptr = (uint8_t *)&dev->identity.model;
|
|
for (int i = 0; i < 39; i+=2) {
|
|
uint8_t tmp = ptr[i+1];
|
|
ptr[i+1] = ptr[i];
|
|
ptr[i] = tmp;
|
|
}
|
|
|
|
debug_print(NOTICE, "Device Name: %s", dev->identity.model);
|
|
|
|
/* Detect medium */
|
|
atapi_command_t command;
|
|
command.command_bytes[0] = 0x25;
|
|
command.command_bytes[1] = 0;
|
|
command.command_bytes[2] = 0;
|
|
command.command_bytes[3] = 0;
|
|
command.command_bytes[4] = 0;
|
|
command.command_bytes[5] = 0;
|
|
command.command_bytes[6] = 0;
|
|
command.command_bytes[7] = 0;
|
|
command.command_bytes[8] = 0; /* bit 0 = PMI (0, last sector) */
|
|
command.command_bytes[9] = 0; /* control */
|
|
command.command_bytes[10] = 0;
|
|
command.command_bytes[11] = 0;
|
|
|
|
uint16_t bus = dev->io_base;
|
|
|
|
outportb(bus + ATA_REG_FEATURES, 0x00);
|
|
outportb(bus + ATA_REG_LBA1, 0x08);
|
|
outportb(bus + ATA_REG_LBA2, 0x08);
|
|
outportb(bus + ATA_REG_COMMAND, ATA_CMD_PACKET);
|
|
|
|
/* poll */
|
|
while (1) {
|
|
uint8_t status = inportb(dev->io_base + ATA_REG_STATUS);
|
|
if ((status & ATA_SR_ERR)) goto atapi_error;
|
|
if (!(status & ATA_SR_BSY) && (status & ATA_SR_DRDY)) break;
|
|
}
|
|
|
|
for (int i = 0; i < 6; ++i) {
|
|
outports(bus, command.command_words[i]);
|
|
}
|
|
|
|
/* poll */
|
|
while (1) {
|
|
uint8_t status = inportb(dev->io_base + ATA_REG_STATUS);
|
|
if ((status & ATA_SR_ERR)) goto atapi_error_read;
|
|
if (!(status & ATA_SR_BSY) && (status & ATA_SR_DRDY)) break;
|
|
}
|
|
|
|
uint16_t data[4];
|
|
|
|
for (int i = 0; i < 4; ++i) {
|
|
data[i] = inports(bus);
|
|
}
|
|
|
|
#define htonl(l) ( (((l) & 0xFF) << 24) | (((l) & 0xFF00) << 8) | (((l) & 0xFF0000) >> 8) | (((l) & 0xFF000000) >> 24))
|
|
uint32_t lba, blocks;;
|
|
memcpy(&lba, &data[0], sizeof(uint32_t));
|
|
lba = htonl(lba);
|
|
memcpy(&blocks, &data[2], sizeof(uint32_t));
|
|
blocks = htonl(blocks);
|
|
|
|
dev->atapi_lba = lba;
|
|
dev->atapi_sector_size = blocks;
|
|
|
|
debug_print(WARNING, "Finished! LBA = %x; block length = %x", lba, blocks);
|
|
return;
|
|
|
|
atapi_error_read:
|
|
debug_print(ERROR, "ATAPI error; no medium?");
|
|
return;
|
|
|
|
atapi_error:
|
|
debug_print(ERROR, "ATAPI early error; unsure");
|
|
return;
|
|
|
|
}
|
|
|
|
static int ata_device_detect(struct ata_device * dev) {
|
|
ata_soft_reset(dev);
|
|
ata_io_wait(dev);
|
|
outportb(dev->io_base + ATA_REG_HDDEVSEL, 0xA0 | dev->slave << 4);
|
|
ata_io_wait(dev);
|
|
ata_status_wait(dev, 10000);
|
|
|
|
unsigned char cl = inportb(dev->io_base + ATA_REG_LBA1); /* CYL_LO */
|
|
unsigned char ch = inportb(dev->io_base + ATA_REG_LBA2); /* CYL_HI */
|
|
|
|
debug_print(NOTICE, "Device detected: 0x%2x 0x%2x", cl, ch);
|
|
if (cl == 0xFF && ch == 0xFF) {
|
|
/* Nothing here */
|
|
return 0;
|
|
}
|
|
if ((cl == 0x00 && ch == 0x00) ||
|
|
(cl == 0x3C && ch == 0xC3)) {
|
|
/* Parallel ATA device, or emulated SATA */
|
|
|
|
char devname[64];
|
|
sprintf((char *)&devname, "/dev/hd%c", ata_drive_char);
|
|
fs_node_t * node = ata_device_create(dev);
|
|
vfs_mount(devname, node);
|
|
ata_drive_char++;
|
|
|
|
ata_device_init(dev);
|
|
|
|
return 1;
|
|
} else if ((cl == 0x14 && ch == 0xEB) ||
|
|
(cl == 0x69 && ch == 0x96)) {
|
|
debug_print(WARNING, "Detected ATAPI device at io-base 0x%3x, control 0x%3x, slave %d", dev->io_base, dev->control, dev->slave);
|
|
|
|
char devname[64];
|
|
sprintf((char *)&devname, "/dev/cdrom%d", cdrom_number);
|
|
|
|
atapi_device_init(dev);
|
|
fs_node_t * node = atapi_device_create(dev);
|
|
vfs_mount(devname, node);
|
|
|
|
cdrom_number++;
|
|
|
|
return 2;
|
|
}
|
|
|
|
/* TODO: ATAPI, SATA, SATAPI */
|
|
return 0;
|
|
}
|
|
|
|
static void ata_device_read_sector(struct ata_device * dev, uint32_t lba, uint8_t * buf) {
|
|
uint16_t bus = dev->io_base;
|
|
uint8_t slave = dev->slave;
|
|
|
|
if (dev->is_atapi) return;
|
|
|
|
spin_lock(ata_lock);
|
|
|
|
#if 0
|
|
int errors = 0;
|
|
try_again:
|
|
#endif
|
|
|
|
ata_wait(dev, 0);
|
|
|
|
/* Stop */
|
|
outportb(dev->bar4, 0x00);
|
|
|
|
/* Set the PRDT */
|
|
outportl(dev->bar4 + 0x04, dev->dma_prdt_phys);
|
|
|
|
/* Enable error, irq status */
|
|
outportb(dev->bar4 + 0x2, inportb(dev->bar4 + 0x02) | 0x04 | 0x02);
|
|
|
|
/* set read */
|
|
outportb(dev->bar4, 0x08);
|
|
|
|
IRQ_ON;
|
|
while (1) {
|
|
uint8_t status = inportb(dev->io_base + ATA_REG_STATUS);
|
|
if (!(status & ATA_SR_BSY)) break;
|
|
}
|
|
|
|
outportb(bus + ATA_REG_CONTROL, 0x00);
|
|
outportb(bus + ATA_REG_HDDEVSEL, 0xe0 | slave << 4 | (lba & 0x0f000000) >> 24);
|
|
ata_io_wait(dev);
|
|
outportb(bus + ATA_REG_FEATURES, 0x00);
|
|
outportb(bus + ATA_REG_SECCOUNT0, 1);
|
|
outportb(bus + ATA_REG_LBA0, (lba & 0x000000ff) >> 0);
|
|
outportb(bus + ATA_REG_LBA1, (lba & 0x0000ff00) >> 8);
|
|
outportb(bus + ATA_REG_LBA2, (lba & 0x00ff0000) >> 16);
|
|
//outportb(bus + ATA_REG_COMMAND, ATA_CMD_READ_PIO);
|
|
#if 1
|
|
while (1) {
|
|
uint8_t status = inportb(dev->io_base + ATA_REG_STATUS);
|
|
if (!(status & ATA_SR_BSY) && (status & ATA_SR_DRDY)) break;
|
|
}
|
|
#endif
|
|
outportb(bus + ATA_REG_COMMAND, ATA_CMD_READ_DMA);
|
|
|
|
ata_io_wait(dev);
|
|
|
|
outportb(dev->bar4, 0x08 | 0x01);
|
|
|
|
while (1) {
|
|
int status = inportb(dev->bar4 + 0x02);
|
|
int dstatus = inportb(dev->io_base + ATA_REG_STATUS);
|
|
if (!(status & 0x04)) {
|
|
continue;
|
|
}
|
|
if (!(dstatus & ATA_SR_BSY)) {
|
|
break;
|
|
}
|
|
}
|
|
IRQ_OFF;
|
|
|
|
#if 0
|
|
if (ata_wait(dev, 1)) {
|
|
debug_print(WARNING, "Error during ATA read of lba block %d", lba);
|
|
errors++;
|
|
if (errors > 4) {
|
|
debug_print(WARNING, "-- Too many errors trying to read this block. Bailing.");
|
|
spin_unlock(ata_lock);
|
|
return;
|
|
}
|
|
goto try_again;
|
|
}
|
|
#endif
|
|
|
|
/* Copy from DMA buffer to output buffer. */
|
|
memcpy(buf, dev->dma_start, 512);
|
|
|
|
/* Inform device we are done. */
|
|
outportb(dev->bar4 + 0x2, inportb(dev->bar4 + 0x02) | 0x04 | 0x02);
|
|
|
|
#if 0
|
|
int size = 256;
|
|
inportsm(bus,buf,size);
|
|
ata_wait(dev, 0);
|
|
outportb(bus + ATA_REG_CONTROL, 0x02);
|
|
#endif
|
|
spin_unlock(ata_lock);
|
|
}
|
|
|
|
static void ata_device_read_sector_atapi(struct ata_device * dev, uint32_t lba, uint8_t * buf) {
|
|
|
|
if (!dev->is_atapi) return;
|
|
|
|
uint16_t bus = dev->io_base;
|
|
spin_lock(ata_lock);
|
|
|
|
outportb(dev->io_base + ATA_REG_HDDEVSEL, 0xA0 | dev->slave << 4);
|
|
ata_io_wait(dev);
|
|
|
|
outportb(bus + ATA_REG_FEATURES, 0x00);
|
|
outportb(bus + ATA_REG_LBA1, dev->atapi_sector_size & 0xFF);
|
|
outportb(bus + ATA_REG_LBA2, dev->atapi_sector_size >> 8);
|
|
outportb(bus + ATA_REG_COMMAND, ATA_CMD_PACKET);
|
|
|
|
/* poll */
|
|
while (1) {
|
|
uint8_t status = inportb(dev->io_base + ATA_REG_STATUS);
|
|
if ((status & ATA_SR_ERR)) goto atapi_error_on_read_setup;
|
|
if (!(status & ATA_SR_BSY) && (status & ATA_SR_DRQ)) break;
|
|
}
|
|
|
|
atapi_in_progress = 1;
|
|
|
|
|
|
atapi_command_t command;
|
|
command.command_bytes[0] = 0xA8;
|
|
command.command_bytes[1] = 0;
|
|
command.command_bytes[2] = (lba >> 0x18) & 0xFF;
|
|
command.command_bytes[3] = (lba >> 0x10) & 0xFF;
|
|
command.command_bytes[4] = (lba >> 0x08) & 0xFF;
|
|
command.command_bytes[5] = (lba >> 0x00) & 0xFF;
|
|
command.command_bytes[6] = 0;
|
|
command.command_bytes[7] = 0;
|
|
command.command_bytes[8] = 0; /* bit 0 = PMI (0, last sector) */
|
|
command.command_bytes[9] = 1; /* control */
|
|
command.command_bytes[10] = 0;
|
|
command.command_bytes[11] = 0;
|
|
|
|
for (int i = 0; i < 6; ++i) {
|
|
outports(bus, command.command_words[i]);
|
|
}
|
|
|
|
/* Wait */
|
|
sleep_on(atapi_waiter);
|
|
|
|
atapi_in_progress = 0;
|
|
|
|
while (1) {
|
|
uint8_t status = inportb(dev->io_base + ATA_REG_STATUS);
|
|
if ((status & ATA_SR_ERR)) goto atapi_error_on_read_setup;
|
|
if (!(status & ATA_SR_BSY) && (status & ATA_SR_DRQ)) break;
|
|
}
|
|
|
|
uint16_t size_to_read = inportb(bus + ATA_REG_LBA2) << 8;
|
|
size_to_read = size_to_read | inportb(bus + ATA_REG_LBA1);
|
|
|
|
|
|
inportsm(bus,buf,size_to_read/2);
|
|
|
|
while (1) {
|
|
uint8_t status = inportb(dev->io_base + ATA_REG_STATUS);
|
|
if ((status & ATA_SR_ERR)) goto atapi_error_on_read_setup;
|
|
if (!(status & ATA_SR_BSY) && (status & ATA_SR_DRDY)) break;
|
|
}
|
|
|
|
atapi_error_on_read_setup:
|
|
spin_unlock(ata_lock);
|
|
|
|
}
|
|
|
|
static void ata_device_write_sector(struct ata_device * dev, uint32_t lba, uint8_t * buf) {
|
|
uint16_t bus = dev->io_base;
|
|
uint8_t slave = dev->slave;
|
|
|
|
spin_lock(ata_lock);
|
|
|
|
outportb(bus + ATA_REG_CONTROL, 0x02);
|
|
|
|
ata_wait(dev, 0);
|
|
outportb(bus + ATA_REG_HDDEVSEL, 0xe0 | slave << 4 | (lba & 0x0f000000) >> 24);
|
|
ata_wait(dev, 0);
|
|
|
|
outportb(bus + ATA_REG_FEATURES, 0x00);
|
|
outportb(bus + ATA_REG_SECCOUNT0, 0x01);
|
|
outportb(bus + ATA_REG_LBA0, (lba & 0x000000ff) >> 0);
|
|
outportb(bus + ATA_REG_LBA1, (lba & 0x0000ff00) >> 8);
|
|
outportb(bus + ATA_REG_LBA2, (lba & 0x00ff0000) >> 16);
|
|
outportb(bus + ATA_REG_COMMAND, ATA_CMD_WRITE_PIO);
|
|
ata_wait(dev, 0);
|
|
int size = ATA_SECTOR_SIZE / 2;
|
|
outportsm(bus,buf,size);
|
|
outportb(bus + 0x07, ATA_CMD_CACHE_FLUSH);
|
|
ata_wait(dev, 0);
|
|
spin_unlock(ata_lock);
|
|
}
|
|
|
|
static int buffer_compare(uint32_t * ptr1, uint32_t * ptr2, size_t size) {
|
|
assert(!(size % 4));
|
|
size_t i = 0;
|
|
while (i < size) {
|
|
if (*ptr1 != *ptr2) return 1;
|
|
ptr1++;
|
|
ptr2++;
|
|
i += sizeof(uint32_t);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void ata_device_write_sector_retry(struct ata_device * dev, uint32_t lba, uint8_t * buf) {
|
|
uint8_t * read_buf = malloc(ATA_SECTOR_SIZE);
|
|
do {
|
|
ata_device_write_sector(dev, lba, buf);
|
|
ata_device_read_sector(dev, lba, read_buf);
|
|
} while (buffer_compare((uint32_t *)buf, (uint32_t *)read_buf, ATA_SECTOR_SIZE));
|
|
free(read_buf);
|
|
}
|
|
|
|
static int ata_initialize(void) {
|
|
/* Detect drives and mount them */
|
|
|
|
/* Locate ATA device via PCI */
|
|
pci_scan(&find_ata_pci, -1, &ata_pci);
|
|
|
|
irq_install_handler(14, ata_irq_handler);
|
|
irq_install_handler(15, ata_irq_handler_s);
|
|
|
|
atapi_waiter = list_create();
|
|
|
|
ata_device_detect(&ata_primary_master);
|
|
ata_device_detect(&ata_primary_slave);
|
|
ata_device_detect(&ata_secondary_master);
|
|
ata_device_detect(&ata_secondary_slave);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ata_finalize(void) {
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_DEF(ata, ata_initialize, ata_finalize);
|