Read multiple sectors when loading ramdisk
This commit is contained in:
parent
878de11959
commit
bc104fe5d9
@ -156,9 +156,7 @@ static int ata_device_detect(struct ata_device * dev) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int _read_12 = 0;
|
||||
|
||||
static void ata_device_read_sector_atapi(struct ata_device * dev, uint32_t lba, uint8_t * buf) {
|
||||
static void ata_device_read_sectors_atapi(struct ata_device * dev, uint32_t lba, uint8_t * buf, int sectors) {
|
||||
|
||||
if (!dev->is_atapi) return;
|
||||
|
||||
@ -182,16 +180,16 @@ _try_again:
|
||||
}
|
||||
|
||||
atapi_command_t command;
|
||||
command.command_bytes[0] = _read_12 ? 0xA8 : 0x28;
|
||||
command.command_bytes[0] = 0x28;
|
||||
command.command_bytes[1] = 0;
|
||||
command.command_bytes[2] = (lba >> 0x18) & 0xFF;
|
||||
command.command_bytes[3] = (lba >> 0x10) & 0xFF;
|
||||
command.command_bytes[4] = (lba >> 0x08) & 0xFF;
|
||||
command.command_bytes[5] = (lba >> 0x00) & 0xFF;
|
||||
command.command_bytes[6] = 0;
|
||||
command.command_bytes[7] = 0;
|
||||
command.command_bytes[8] = _read_12 ? 0 : 1; /* bit 0 = PMI (0, last sector) */
|
||||
command.command_bytes[9] = _read_12 ? 1 : 0; /* control */
|
||||
command.command_bytes[6] = sectors >> 16;
|
||||
command.command_bytes[7] = sectors >> 8;
|
||||
command.command_bytes[8] = sectors; /* bit 0 = PMI (0, last sector) */
|
||||
command.command_bytes[9] = 0; /* control */
|
||||
command.command_bytes[10] = 0;
|
||||
command.command_bytes[11] = 0;
|
||||
|
||||
@ -199,22 +197,26 @@ _try_again:
|
||||
outports(bus, command.command_words[i]);
|
||||
}
|
||||
|
||||
|
||||
for (int i = 0; i < sectors; ++i) {
|
||||
while (1) {
|
||||
uint8_t status = inportb(dev->io_base + ATA_REG_STATUS);
|
||||
if ((status & ATA_SR_ERR)) goto atapi_error_on_read_setup_cmd;
|
||||
if (!(status & ATA_SR_BSY) && (status & ATA_SR_DRQ)) break;
|
||||
}
|
||||
uint16_t size_to_read = inportb(bus + ATA_REG_LBA2) << 8;
|
||||
size_to_read = size_to_read | inportb(bus + ATA_REG_LBA1);
|
||||
|
||||
uint16_t size_to_read = inportb(bus + ATA_REG_LBA2) << 8;
|
||||
size_to_read = size_to_read | inportb(bus + ATA_REG_LBA1);
|
||||
inportsm(bus,buf,size_to_read/2);
|
||||
|
||||
inportsm(bus,buf,size_to_read/2);
|
||||
buf += 2048;
|
||||
|
||||
while (1) {
|
||||
uint8_t status = inportb(dev->io_base + ATA_REG_STATUS);
|
||||
if ((status & ATA_SR_ERR)) goto atapi_error_on_read_setup;
|
||||
if (!(status & ATA_SR_BSY) && (status & ATA_SR_DRDY)) break;
|
||||
}
|
||||
}
|
||||
|
||||
return;
|
||||
|
||||
@ -222,13 +224,9 @@ atapi_error_on_read_setup:
|
||||
print("error on setup\n");
|
||||
return;
|
||||
atapi_error_on_read_setup_cmd:
|
||||
if (_read_12) {
|
||||
_read_12 = 0;
|
||||
print("trying again\n");
|
||||
goto _try_again;
|
||||
}
|
||||
print("error on cmd\n");
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
#define ata_device_read_sector_atapi(a,b,c) ata_device_read_sectors_atapi(a,b,c,1)
|
||||
|
@ -188,16 +188,23 @@ done:
|
||||
modules_mboot[multiboot_header.mods_count-1].mod_start = ramdisk_off;
|
||||
modules_mboot[multiboot_header.mods_count-1].mod_end = ramdisk_off + ramdisk_len;
|
||||
|
||||
print_("\n\n\n\n\n\n\n");
|
||||
print_banner("Loading ramdisk...");
|
||||
print_("\n\n\n");
|
||||
attr = 0x70;
|
||||
print_("Loading ramdisk");
|
||||
|
||||
for (int i = dir_entry->extent_start_LSB; i < dir_entry->extent_start_LSB + dir_entry->extent_length_LSB / 2048 + 1; ++i, offset += 2048) {
|
||||
if (i % ((dir_entry->extent_length_LSB / 2048) / 80) == 0) {
|
||||
print_(" ");
|
||||
}
|
||||
ata_device_read_sector_atapi(device, i, (uint8_t *)KERNEL_LOAD_START + offset);
|
||||
int i = dir_entry->extent_start_LSB;
|
||||
int sectors = dir_entry->extent_length_LSB / 2048 + 1;
|
||||
#define SECTORS 65536
|
||||
while (sectors >= SECTORS) {
|
||||
print_(".");
|
||||
ata_device_read_sectors_atapi(device, i, (uint8_t *)KERNEL_LOAD_START + offset, SECTORS);
|
||||
|
||||
sectors -= SECTORS;
|
||||
offset += 2048 * SECTORS;
|
||||
i += SECTORS;
|
||||
}
|
||||
if (sectors > 0) {
|
||||
print_("!");
|
||||
ata_device_read_sectors_atapi(device, i, (uint8_t *)KERNEL_LOAD_START + offset, sectors);
|
||||
offset += 2048;
|
||||
}
|
||||
attr = 0x07;
|
||||
print("Done.\n");
|
||||
|
Loading…
x
Reference in New Issue
Block a user