# Limine ### What is Limine? Limine is a modern, advanced x86/x86_64 BIOS/UEFI multiprotocol bootloader used as the reference implementation for the [stivale protocols](https://github.com/stivale/stivale). ### Support Limine Like Limine and want to support it? Donate Bitcoin to `bc1q00d59y75crpapw7qp8sea5j5sx6l4k2ssjylf9` :) ### Limine's boot menu ![Reference screenshot](/screenshot.png?raw=true "Reference screenshot") [Photo by Martin Damboldt from Pexels](https://www.pexels.com/photo/gray-bridge-and-trees-814499/) ### Supported boot protocols * stivale and stivale2 (Limine's native boot protocols, see [their specifications](https://github.com/stivale) for details) * Linux * Multiboot 1 * Multiboot 2 * Chainloading ### Supported filesystems * ext2/3/4 * echfs * FAT12/16/32 * NTFS * ISO9660 (CDs/DVDs) ### Supported partitioning schemes * MBR * GPT * Unpartitioned media ### Minimum system requirements While Limine is made with modern, 64-bit, PCs in mind, it supports 32-bit ones as well, starting with PCs with Pentium Pro class CPUs. ## Binary releases For convenience, for point releases, binaries are distributed. These binaries are shipped in the `-binary` branches and tags of this repository (see [branches](https://github.com/limine-bootloader/limine/branches/all) and [tags](https://github.com/limine-bootloader/limine/tags)). For example, to clone the latest binary release of the `v2.x` branch one can do ```bash git clone https://github.com/limine-bootloader/limine.git --branch=v2.0-branch-binary --depth=1 ``` or, to clone a specific binary point release (for example `v2.88`) ```bash git clone https://github.com/limine-bootloader/limine.git --branch=v2.88-binary --depth=1 ``` `limine-install` binaries are provided for Linux and Windows. In case one wants to rebuild `limine-install`, simply run `make` in the binary release directory. ## Building the bootloader *The following steps are not necessary if cloning a binary release. If so, skip to* *"Installing Limine binaries".* ### Building the toolchain This step can take a long time, but it will ensure that the toolchain will work with Limine. If on an x86_64 host, with GCC or Clang installed, it is possible that the host toolchain will suffice. You can skip to the next paragraph in order to use the system's toolchain instead. If that fails, you can still come back here later (remember to `make clean` and re-run `./configure` after building the toolchain). The toolchain's build process depends on the following packages: `GNU make`, `GNU tar`, `texinfo`, `curl`, `gzip`, `bzip2`, `gcc/clang`, `g++/clang++`. Building the toolchain can be accomplished by running: ```bash ./make_toolchain.sh ``` ### Prerequisites In order to build Limine, the following programs have to be installed: `GNU make`, `grep`, `sed`, `find`, `awk`, `gzip`, `nasm`, `mtools` (optional, necessary to build `limine-eltorito-efi.bin`). Furthermore, either the toolchain must have been built in the previous paragraph, or `gcc` or `llvm/clang` must also be installed, alongside `GNU binutils`. `nasm` is optional if the toolchain was built in the previous paragraph as it is built as part of it. ### Configure If using a release tarball (recommended, see https://github.com/limine-bootloader/limine/releases), run `./configure` directly. If checking out from the repository, run `./autogen.sh` first (`GNU autoconf` and `GNU automake` required). Both `./autogen.sh` and `./configure` take arguments and environment variables; for more information on these, run `./configure --help`. Limine supports both in-tree and out-of-tree builds. Simply run the `configure` script from the directory you wish to execute the build in. The following `make` commands are supposed to be ran inside the build directory. ### Building Limine To build Limine, run: ```bash make # (or gmake where applicable) ``` The generated bootloader files are going to be in `bin`. ## Installing Limine binaries This step is optional as the bootloader binaries can be used from the `bin` or release directory just fine. This step will only install them to a `share` and `bin` directories in the specified prefix (default is `/usr/local`, see `./configure --help`, or the `PREFIX` variable if installing a binary release). To install Limine, run: ```bash make install # (or gmake where applicable) ``` ## How to use ### UEFI The `BOOTX64.EFI` file is a vaild EFI application that can be simply copied to the `/EFI/BOOT` directory of a FAT formatted EFI system partition. This file can be installed there and coexist with a BIOS installation of Limine (see below) so that the disk will be bootable on both BIOS and UEFI systems. The boot device must to contain the `limine.cfg` file in either the root or the `boot` directory of one of the partitions, formatted with a supported file system (the ESP partition is recommended). ### BIOS/MBR In order to install Limine on a MBR device (which can just be a raw image file), run `limine-install` as such: ```bash limine-install ``` The boot device must to contain the `limine.sys` and `limine.cfg` files in either the root or the `boot` directory of one of the partitions, formatted with a supported file system. ### BIOS/GPT If using a GPT formatted device, there are 2 options one can follow for installation: * Specifying a dedicated stage 2 partition. * Letting `limine-install` attempt to embed stage 2 within GPT structures. In case one wants to specify a stage 2 partition, create a partition on the GPT device of at least 32KiB in size, and pass the 1-based number of the partition to `limine-install` as a second argument; such as: ```bash limine-install <1-based stage 2 partition number> ``` In case one wants to let `limine-install` embed stage 2 within GPT's structures, simply omit the partition number, and invoke `limine-install` the same as one would do for an MBR partitioned device. The boot device must to contain the `limine.sys` and `limine.cfg` files in either the root or the `boot` directory of one of the partitions, formatted with a supported file system. ### BIOS/UEFI hybrid ISO creation In order to create a hybrid ISO with Limine, place the `limine-eltorito-efi.bin`, `limine-cd.bin`, `limine.sys`, and `limine.cfg` files into a directory which will serve as the root of the created ISO. (`limine.sys` and `limine.cfg` must either be in the root or inside a `boot` subdirectory; `limine-eltorito-efi.bin` and `limine-cd.bin` can reside anywhere). Place any other file you want to be on the final ISO in said directory, then run: ``` xorriso -as mkisofs -b \ -no-emul-boot -boot-load-size 4 -boot-info-table \ --efi-boot \ -efi-boot-part --efi-boot-image --protective-msdos-label \ -o image.iso ``` *Note: `xorriso` is required.* And do not forget to also run `limine-install` on the generated image: ``` limine-install image.iso ``` `` is the relative path of `limine-cd.bin` inside the root directory. For example, if it was copied in `/boot/limine-cd.bin`, it would be `boot/limine-cd.bin`. `` is the relative path of `limine-eltorito-efi.bin` inside the root directory. For example, if it was copied in `/boot/limine-eltorito-efi.bin`, it would be `boot/limine-eltorito-efi.bin`. ### BIOS/PXE boot The `limine-pxe.bin` binary is a valid PXE boot image. In order to boot Limine from PXE it is necessary to setup a DHCP server with support for PXE booting. This can either be accomplished using a single DHCP server or your existing DHCP server and a proxy DHCP server such as dnsmasq. `limine.cfg` and `limine.sys` are expected to be on the server used for boot. ### Configuration The `limine.cfg` file contains Limine's configuration. An example `limine.cfg` file can be found in [`test/limine.cfg`](https://github.com/limine-bootloader/limine/blob/trunk/test/limine.cfg). More info on the format of `limine.cfg` can be found in [`CONFIG.md`](https://github.com/limine-bootloader/limine/blob/trunk/CONFIG.md). ## Acknowledgments Limine uses a stripped-down version of [tinf](https://github.com/jibsen/tinf). ## Discord server We have a [Discord server](https://discord.gg/QEeZMz4) if you need support, info, or you just want to hang out with us.