rulimine/CONFIG.md

112 lines
7.9 KiB
Markdown
Raw Normal View History

2020-08-29 21:02:16 +03:00
# Limine configuration file
2020-04-21 20:18:13 +03:00
## Location of the config file
Limine scans for a config file on *the boot drive*. Every partition on the boot drive
2021-03-14 09:04:12 +03:00
is scanned sequentially (first partition first, last partition last) for the presence of either a `/limine.cfg`, `/boot/limine.cfg`, or a `/EFI/BOOT/limine.cfg` file, in that order.
Once the file is located, Limine will use it as its config file. Other possible
candidates in subsequent partitions or directories are ignored.
It is thus imperative that the intended config file is placed in a location that will
not be shadowed by another potentially candidate config file.
## Structure of the config file
2020-08-29 21:02:16 +03:00
The Limine configuration file is comprised of *assignments* and *entries*.
2020-04-21 20:18:13 +03:00
### Entries and sub-entries
2020-04-21 20:18:13 +03:00
*Entries* describe boot *entries* which the user can select in the *boot menu*.
An *entry* is simply a line starting with `:` followed by a newline-terminated
string.
Any *locally assignable* key that comes after it, and before another *entry*, or
the end of the file, will be tied to the *entry*.
An *entry* can be a directory, meaning it can hold sub-entries. In order for an
entry to become a directory, it needs to have a sub-entry following right after it.
A *sub-entry* is an entry with a number of `:` greater than 1 prepended to it.
Each `:` represents 1 level deeper down the tree hierarchy of directories and
entries.
Directories can be expanded (meaning they will not show up as collapsed in the
menu) by default if a `+` is put between the `:`s and the beginning of the entry's name.
### Assignments
2020-04-21 20:18:13 +03:00
*Assignments* are simple `KEY=VALUE` style assignments.
`VALUE` can have spaces and `=` symbols, without requiring quotations. New lines
are delimiters.
Some *assignments* are part of an entry (*local*), some other assignments are *global*.
*Global assignments* can appear anywhere in the file and are not part of an entry,
although usually one would put them at the beginning of the config.
Some *local assignments* are shared between entries using any *protocol*, while other
*local assignments* are specific to a given *protocol*.
Some keys take *URIs* as values; these are described in the next section.
2020-04-21 20:18:13 +03:00
*Globally assignable* keys are:
* `TIMEOUT` - Specifies the timeout in seconds before the first *entry* is automatically booted. If set to `no`, disable automatic boot. If set to `0`, boots default entry instantly (see `DEFAULT_ENTRY` key).
* `DEFAULT_ENTRY` - 1-based entry index of the entry which will be automatically selected at startup. If unspecified, it is `1`.
* `GRAPHICS` - If set to `yes`, do use graphical VESA framebuffer for the boot menu, else use text mode.
* `MENU_RESOLUTION` - Specify screen resolution to be used by the Limine menu in the form `<width>x<height>`. This will *only* affect the menu, not any booted OS. If not specified, Limine will pick a resolution automatically. If the resolution is not available, Limine will pick another one automatically. Ignored if `GRAPHICS` is not `yes`.
* `MENU_BRANDING` - A string that will be displayed on top of the Limine menu.
* `MENU_FONT` - URI path to a font file to be used instead of the default one for the menu. The font file must be a code page 437 character set comprised of 256 consecutive 8x16 glyphs bitmaps (4096 byte font file). Each glyph's bitmap must be expressed left to right (1 byte per row), and top to bottom (16 bytes per whole glyph).
2020-11-05 19:49:38 +03:00
* `THEME_COLOURS` - Specifies the colour palette used by the terminal (AARRGGBB). It is a `;` separated array of 8 colours: black, red, green, brown, blue, magenta, cyan, and gray, respectively. Ignored if `GRAPHICS` is not `yes`.
2020-11-05 15:36:42 +03:00
* `THEME_COLORS` - Alias of `THEME_COLOURS`.
* `THEME_MARGIN` - Set the amount of margin around the terminal. Ignored if `GRAPHICS` is not `yes`.
* `THEME_MARGIN_GRADIENT` - Set the thickness in pixel for the gradient around the terminal. Ignored if `GRAPHICS` is not `yes`.
* `BACKGROUND_PATH` - URI where to find the background .BMP file. Ignored if `GRAPHICS` is not `yes`.
2020-04-21 20:18:13 +03:00
*Locally assignable (non protocol specific)* keys are:
2020-09-26 01:30:16 +03:00
* `PROTOCOL` - The boot protocol that will be used to boot the kernel. Valid protocols are: `linux`, `stivale`, `stivale2`, `chainload`.
2020-05-06 17:38:45 +03:00
* `CMDLINE` - The command line string to be passed to the kernel. Can be omitted.
* `KERNEL_CMDLINE` - Alias of `CMDLINE`.
2020-04-21 20:18:13 +03:00
*Locally assignable (protocol specific)* keys are:
* Linux protocol:
* `KERNEL_PATH` - The URI path of the kernel.
* `MODULE_PATH` - The URI path to a module (such as initramfs).
Note that one can define this last variable multiple times to specify multiple
modules.
2021-03-26 22:07:23 +03:00
* `RESOLUTION` - The resolution to be used. This setting takes the form of `<width>x<height>x<bpp>`. If the resolution is not available, Limine will pick another one automatically. Omitting `<bpp>` will default to 32.
2020-09-26 01:30:16 +03:00
* stivale and stivale2 protocols:
* `KERNEL_PATH` - The URI path of the kernel.
* `MODULE_PATH` - The URI path to a module.
2020-04-21 20:18:13 +03:00
* `MODULE_STRING` - A string to be passed to a module.
2020-11-05 15:36:42 +03:00
Note that one can define these 2 last variable multiple times to specify multiple
modules.
The entries will be matched in order. E.g.: the 1st module path entry will be matched
to the 1st module string entry that appear, and so on.
2021-03-26 22:07:23 +03:00
* `RESOLUTION` - The resolution to be used should the kernel request a graphical framebuffer. This setting takes the form of `<width>x<height>x<bpp>` and *overrides* any resolution requested by the kernel, or automatic resolution requests. If the resolution is not available, Limine will pick another one automatically. Omitting `<bpp>` will default to 32.
* Chainload protocol:
* `DRIVE` - The 1-based BIOS drive to chainload.
* `PARTITION` - The 1-based BIOS partition to chainload, if omitted, chainload drive.
2020-05-06 17:38:45 +03:00
## URIs
A URI is a path that Limine uses to locate resources in the whole system. It is
comprised of a *resource*, a *root*, and a *path*. It takes the form of:
```
resource://root/path
```
The format for `root` changes depending on the resource used.
A resource can be one of the following:
* `boot` - If booted off PXE this is an alias of `tftp`. Else the `root` is the 1-based decimal value representing the partition on the boot drive (values of 5+ for MBR logical partitions). If omitted, the partition containing the configuration file on the boot drive is used. For example: `boot://2/...` will use partition 2 of the boot drive and `boot:///...` will use the partition containing the config file on the boot drive.
* `hdd` - Hard disk drives. The `root` takes the form of `drive:partition`; for example: `hdd://3:1/...` would use hard drive 3, partition 1. Partitions and drives are both 1-based (partition values of 5+ for MBR logical partitions). Omitting the partition is possible; for example: `hdd://2:/...`. Omitting the partition will access the entire volume instead of a specific partition (useful for unpartitioned media).
* `odd` - Optical disk drives (CDs/DVDs/...). The `root` takes the form of `drive:partition`; for example: `odd://3:1/...` would use optical drive 3, partition 1. Partitions and drives are both 1-based (partition values of 5+ for MBR logical partitions). Omitting the partition is possible; for example: `odd://2:/...`. Omitting the partition will access the entire volume instead of a specific partition (useful for unpartitioned media, which is often the case for optical media).
* `guid` - The `root` takes the form of a GUID/UUID, such as `guid://736b5698-5ae1-4dff-be2c-ef8f44a61c52/...`. The GUID is that of either a filesystem, when available, or a GPT partition GUID, when using GPT, in a unified namespace.
2020-12-10 09:22:06 +03:00
* `uuid` - Alias of `guid`.
* `tftp` - The `root` is the IP address of the tftp server to load the file from. If the root is left empty (`tftp:///...`) the file will be loaded from the server Limine booted from. This resource is only available when booting off PXE.
A URI can optionally be prefixed by a `$` character to indicate that the file
pointed to be the URI is a gzip-compressed payload to be uncompressed on the
fly. E.g.: `$boot:///somemodule.gz`.