kolibrios/data/it/docs/STACK.TXT

Cosaè implementato
==================

Le seguenti feature sono presenti nel codice stack TCP/IP:

  IP layer.
  ICMP.
  TCP layer.
  UDP layer.
  local loopback.
  Realtek 8029 PCI ethernet interface.
  Realtek 8139 PCI ethernet interface.
  Intel i8255x PCI ethernet interface.
  Dynamic ARP table.
  PPP dialer

E sono implementate le seguenti applicazioni:

  Server HTTP
  Telnet
  Client POP
  DNS Name resolver
  Server MP3
  Client TFTP
  Client IRC

Vi sono inoltre applicazioni sperimentali, per los terming di musica e
per la comunicazione via socket, in fase di sviluppo vi è anche un
browser web.


Cosa non è implementato
=======================

Il layer IP non processa le opzioni dello header.
Il layer IP non supporta il routing.
Non è supportata la 'Packet fragmentation'.


Come configurare Kolibri per il PPP
===================================

Vedi ppp.txt


Come configurare Kolibri per l'Ethernet
=======================================

Inanzitutto è necessario possedere una scheda ethernet supportata e
installata, o presente sulla scheda madre. Se non si è certi del tipo di
hardware, si può provare a configurare lo stack. Se l'hardware è
supportato allora verrà notificato e configurato correttamente.

Setting Up the ARP Table
------------------------

Kolibri's ARP table is dynamically created and maintained; You can see what
hosts Kolibri has communicated with by running the ARPSTAT application.

Enabling Ethernet
-----------------

Boot Kolibri, then select STACKCFG from the NET menu.
Press the 'Read' Button, then select 'Packet Driver'.
Press 'Change' next to the IP address, and enter the IP address you want
to use. Make sure it is on the same sub-net as the LAN to which you are
connected.
Press 'Apply' to action the changes.
Close the program.


The stack is now running, which you can test by pinging Kolibri from a
remote host.


The simplest way to connect two PC's together is using a 'Null Modem'
Ethernet cable. These simply cross certain wires over. They can be
purchased from PC stores, but are simple to make. Details can be found
on the web. Look on google for 'ethernet cross over cable' or similar.


How to use TCP/IP locally, with no Network
==========================================

Kolibri supports a form of local loopback that means applications on the
same PC can communicate with each other via sockets as though they
were on separate hosts. To connect to an application on the same machine,
specify the local IP address as the destination address. You do not even
need to configure the stack for ethernet; local loopback will work without
any network hardware. It's great for development and testing.


Application Programming Interface
=================================

The developer can access the stack through interrupt 0x40, function 53.
The file TFTPC.ASM gives a good example of how to use the programming
interface ( at least, for UDP), but as network communication is complex
I'll give an overview.


Sockets
=======

Applications connect to each other and pass information between themselves
through a mechanism called a 'socket'. Sockets are end-points for
communication; You need one at each application to communicate.

Using sockets is a little like using files on an OS; You open them, read
and write to them, then close them. The only thing that makes life slightly
more complicated is that unlike with a file, you have something intelligent
at the other end ( which for example may not want to close when you do! )

Lets deal with the terminology before we go any further.

socket      A unique identifier used by the application for communication.
local port  A number that identifies this application on the local host.
            Ports are a way to allow multiple applications to communicate
            with other hosts without the data becoming mixed up. ( The
            technical term is 'multiplex' ). Port numbers are 16 bit.
remote port A number that identifies the application on the remote host
            to which we are communicating with. To the remote host, this is
            it's 'local port'. Port numbers are 16 bit.
IP Address  A 32 bit number that identifies the remote host PC that we are
            communicating with.
Passive     Refers to the mode by which a socket is opened; When opening in
            passive mode, the local PC is awaiting an incoming connection.
Active      Refers to the mode by which a socket is opened; When opening in
            active mode, the local PC will attempt to connect to a remote
            PC.

When you connect to a socket on a remote PC, you need to specify more than
just the IP address, otherwise the remote stack will not know to which
application it should send your data. You must fully qualify the address,
which means you specify the IP address and the port number. This would be
written like this

192.168.1.10:80   ; Connect to port 80 on the machine 192.168.1.10

Port numbers are important. Some are 'well known' and provide access to
common applications. For example port 80 is used by HTTP servers; That
way I can connect to a webserver on a host without having to find out
what port number the application is listening on.

This brings me to the way in which you open a socket; As I said earlier,
there are two modes, Passive and Active. A webserver would open a passive
socket, as it is waiting for incoming connection requests. A web browser
would open an active socket because it is attempting to connect to a
specified remote host.


Access to programming interface
===============================
The developer accesses the stack functions through interrupt 0x40,
function 53. Some functions may be accessed through function 52, but these
are mainly for stack configuration.
Here is a summary of the functions that you may use and the parameter
definitions.


Get Local IP Address
--------------------
eax = 52
ebx = 1

IP address returned in eax ( in internet byte order )


Write to stack input queue
--------------------------
eax = 52
ebx = 6
edx = number of bytes to write
esi = pointer to data ( in application space )

On return, eax holds 0 for OK, or 0xFFFFFFFF for error.
This interface is for slow network drivers only ( PPP, SLIP )


Read data from network output queue
-----------------------------------
eax = 52
ebx = 8
esi = pointer to data ( in application space )

On return, eax holds number of bytes transferred.
This interface is for slow network drivers only ( PPP, SLIP )


Open a UDP socket
-----------------
eax = 53
ebx = 0
ecx = local port
edx = remote port
esi = remote ip address ( in internet byte order )

The socket number allocated is returned in eax.
A return value of 0xFFFFFFFF means no socket could be opened.


Open a TCP socket
-----------------
eax = 53
ebx = 5
ecx = local port
edx = remote port
esi = remote ip address ( in internet byte order )
edi = mode : SOCKET_PASSIVE or SOCKET_ACTIVE  ( defined in stack.inc )

The socket number allocated is returned in eax.
A return value of 0xFFFFFFFF means no socket could be opened.


Close a socket (UDP Only )
--------------------------
eax = 53
ebx = 1
ecx = socket number

On return, eax holds 0 for OK, or 0xFFFFFFFF for error.


Close a socket (TCP Only )
--------------------------
eax = 53
ebx = 8
ecx = socket number

On return, eax holds 0 for OK, or 0xFFFFFFFF for error.


Poll socket
-----------
eax = 53
ebx = 2
ecx = socket number

On return, eax holds the number of bytes in the receive buffer.


Read socket data
----------------
eax = 53
ebx = 3
ecx = socket number

On return, eax holds the number of bytes remaining, bl holds a data byte.


Write to socket ( UDP only )
----------------------------
eax = 53
ebx = 4
ecx = socket number
edx = number of bytes to write
esi = pointer to data ( in application space )

On return, eax holds 0 for OK, or 0xFFFFFFFF for error.


Return socket status ( TCP only )
---------------------------------
eax = 53
ebx = 6
ecx = socket number

On return, eax holds the sockets TCP status.
This function can be used to determine when a socket has actually connected
to another socket - data cannot be written to a socket until the connection
is established (TCB_ESTABLISHED). The states a socket can be in are defined
in stack.inc as TCB_


Write to socket ( TCP only )
----------------------------
eax = 53
ebx = 7
ecx = socket number
edx = number of bytes to write
esi = pointer to data ( in application space )

On return, eax holds 0 for OK, or 0xFFFFFFFF for error.


Check port number
-----------------
eax = 53
ebx = 9
ecx = port number

This function is used to determine if a port number
is in use by any sockets as a local port number. Local
port numbers are normally unique.

On return, eax is 1 for port number not in use, 0 otherwise.


Opening a TCP socket in Kolibri
===============================

There are two ways to open a socket - Passive or Active.

In a Passive connection your application 'listens' for incoming
requests from remote applications. Typically this will be done when
you are implementing a server application that allows any other
application to connect to it. You would specify a 'known' local
port number, such as 80 for a web server. You would leave the
remote IP and remote port number as 0, which indicates any
remote application may connect.

Once the socket has been opened you would wait for an incoming
connection before doing anything. This can be by either checking
the socket status for TCB_ESTABLISHED, or waiting for data in the
receive buffer.

In an Active connection, you are making a connection to a specified
remote port. The remote IP and remote port parameters must be filled
in with non-zero values ( otherwise, what are you connecting to? ).
You also specify a unique local port number so the remote application
can uniquely identify you - after all, there may be several applications
on your machine connected to the same remote host. See below for finding
a unique port number.


How to find an unused local port number
=======================================

Typically when you are creating an active connection to a remote
socket you will want to choose a unique local port number. Local
port numbers normally start from 1000; The following code may
be used to obtain an unused port number prior to making the
open socket call.

    mov     ecx, 1000        ; local port starting at 1000

getlp:
    inc     ecx
    push    ecx
    mov     eax, 53
    mov     ebx, 9
    int     0x40
    pop     ecx
    cmp     eax, 0            ; is this local port in use?
    jz      getlp            ; yes - so try next

    ; ecx contains a free local port number



Writing data to a socket
========================

There are two functions available depending on whether the socket
was opened for TCP or UDP protocol; The call parameters are the
same however. When the socket is being opened for TCP, use the
status function to poll for a connection - data cannot be written
to a socket until another socket has connected to it, and the
state of the socket is TCB_ESTABLISHED.

When you write data, the call results in a single IP packet being
created and transmitted. Thus the user application is responsible for
the size of transmitted packets. Keep the packet sizes under 768 bytes.
If you are writing a terminal program like telnet, you may want to send
a packet for each keystroke ( inefficient ) or use a timer to send data
periodically ( say, every second ).


Reading data from a socket
==========================

There is one function to read data from a sockets receive buffer. This
function retrieves one byte at a time. You can use the poll function to
test the receive buffer for data.


Closing a socket
================

Simply call the appropriate function - there is one for TCP, and another
for UDP. When closing a TCP socket, don't forget that the other end
may continue to send data, so the socket may remain active for a
few seconds after your call.


If you have any questions or have suggestions for improving this
document please contact me at mikeh@oceanfree.net.