Aren/kolibrios
1
0
Fork 0
mirror of https://github.com/KolibriOS/kolibrios.git synced 2024-12-11 17:44:09 +03:00
Code Issues Packages Projects Releases Wiki Activity
82ddf447d5
kolibrios/drivers/usb/ohci.asm
CleverMouse 9e74531bdb small fix in OHCI driver 
git-svn-id: svn://kolibrios.org@5246 a494cfbc-eb01-0410-851d-a64ba20cac60
2014-12-19 18:03:04 +00:00

1719 lines
70 KiB
NASM
Raw Blame History

; Code for OHCI controllers.
; Standard driver stuff
format PE DLL native
entry start
__DEBUG__ equ 1
__DEBUG_LEVEL__ equ 1
section '.reloc' data readable discardable fixups
section '.text' code readable executable
include '../proc32.inc'
include '../struct.inc'
include '../macros.inc'
include '../fdo.inc'
include '../../kernel/trunk/bus/usb/common.inc'
; =============================================================================
; ================================= Constants =================================
; =============================================================================
; OHCI register declarations
; All of the registers should be read and written as Dwords.
; Partition 1. Control and Status registers.
OhciRevisionReg = 0
OhciControlReg = 4
OhciCommandStatusReg = 8
OhciInterruptStatusReg = 0Ch
OhciInterruptEnableReg = 10h
OhciInterruptDisableReg = 14h
; Partition 2. Memory Pointer registers.
OhciHCCAReg = 18h
OhciPeriodCurrentEDReg = 1Ch
OhciControlHeadEDReg = 20h
OhciControlCurrentEDReg = 24h
OhciBulkHeadEDReg = 28h
OhciBulkCurrentEDReg = 2Ch
OhciDoneHeadReg = 30h
; Partition 3. Frame Counter registers.
OhciFmIntervalReg = 34h
OhciFmRemainingReg = 38h
OhciFmNumberReg = 3Ch
OhciPeriodicStartReg = 40h
OhciLSThresholdReg = 44h
; Partition 4. Root Hub registers.
OhciRhDescriptorAReg = 48h
OhciRhDescriptorBReg = 4Ch
OhciRhStatusReg = 50h
OhciRhPortStatusReg = 54h
; =============================================================================
; ================================ Structures =================================
; =============================================================================
; OHCI-specific part of a pipe descriptor.
; * This structure corresponds to the Endpoint Descriptor aka ED from the OHCI
; specification.
; * The hardware requires 16-bytes alignment of the hardware part.
; Since the allocator (usb_allocate_common) allocates memory sequentially
; from page start (aligned on 0x1000 bytes), block size for the allocator
; must be divisible by 16; usb1_allocate_endpoint ensures this.
struct ohci_pipe
; All addresses are physical.
Flags dd ?
; 1. Lower 7 bits (bits 0-6) are FunctionAddress. This is the USB address of
; the function containing the endpoint that this ED controls.
; 2. Next 4 bits (bits 7-10) are EndpointNumber. This is the USB address of
; the endpoint within the function.
; 3. Next 2 bits (bits 11-12) are Direction. This 2-bit field indicates the
; direction of data flow: 1 = OUT, 2 = IN. If neither IN nor OUT is
; specified, then the direction is determined from the PID field of the TD.
; For CONTROL endpoints, the transfer direction is different
; for different transfers, so the value of this field is 0
; (3 would have the same effect) and the actual direction
; of one transfer is encoded in the Transfer Descriptor.
; 4. Next bit (bit 13) is Speed bit. It indicates the speed of the endpoint:
; full-speed (S = 0) or low-speed (S = 1).
; 5. Next bit (bit 14) is sKip bit. When this bit is set, the hardware
; continues on to the next ED on the list without attempting access
; to the TD queue or issuing any USB token for the endpoint.
; Always cleared.
; 6. Next bit (bit 15) is Format bit. It must be 0 for Control, Bulk and
; Interrupt endpoints and 1 for Isochronous endpoints.
; 7. Next 11 bits (bits 16-26) are MaximumPacketSize. This field indicates
; the maximum number of bytes that can be sent to or received from the
; endpoint in a single data packet.
TailP dd ?
; Physical address of the tail descriptor in the TD queue.
; The descriptor itself is not in the queue. See also HeadP.
HeadP dd ?
; 1. First bit (bit 0) is Halted bit. This bit is set by the hardware to
; indicate that processing of the TD queue on the endpoint is halted.
; 2. Second bit (bit 1) is toggleCarry bit. Whenever a TD is retired, this
; bit is written to contain the last data toggle value from the retired TD.
; 3. Next two bits (bits 2-3) are reserved and always zero.
; 4. With masked 4 lower bits, this is HeadP itself: physical address of the
; head descriptor in the TD queue, that is, next TD to be processed for this
; endpoint. Note that a TD must be 16-bytes aligned.
; Empty queue is characterized by the condition HeadP == TailP.
NextED dd ?
; If nonzero, then this entry is a physical address of the next ED to be
; processed. See also the description before NextVirt field of the usb_pipe
; structure. Additionally to that description, the following is specific for
; the OHCI controller:
; * n=5, N=32, there are 32 "leaf" periodic lists.
; * The 1ms periodic list also serves Isochronous endpoints, which should be
; in the end of the list.
; * There is no "next" list for Bulk and Control lists, they are processed
; separately from others.
; * There is no "next" list for Periodic list for 1ms interval.
ends
; This structure describes the static head of every list of pipes.
; The hardware requires 16-bytes alignment of this structure.
; All instances of this structure are located sequentially in uhci_controller,
; uhci_controller is page-aligned, so it is sufficient to make this structure
; 16-bytes aligned and verify that the first instance is 16-bytes aligned
; inside uhci_controller.
struct ohci_static_ep
Flags dd ?
; Same as ohci_pipe.Flags.
; sKip bit is set, so the hardware ignores other fields except NextED.
dd ?
; Corresponds to ohci_pipe.TailP. Not used.
NextList dd ?
; Virtual address of the next list.
NextED dd ?
; Same as ohci_pipe.NextED.
SoftwarePart rd sizeof.usb_static_ep/4
; Software part, common for all controllers.
dd ?
; Padding for 16-bytes alignment.
ends
if sizeof.ohci_static_ep mod 16
.err ohci_static_ep must be 16-bytes aligned
end if
; OHCI-specific part of controller data.
; * The structure describes the memory area used for controller data,
; additionally to the registers of the controller.
; * The structure includes two parts, the hardware part and the software part.
; * The hardware part consists of first 256 bytes and corresponds to
; the HCCA from OHCI specification.
; * The hardware requires 256-bytes alignment of the hardware part, so
; the entire descriptor must be 256-bytes aligned.
; This structure is allocated with kernel_alloc (see usb_init_controller),
; this gives page-aligned data.
; * The controller is described by both ohci_controller and usb_controller
; structures, for each controller there is one ohci_controller and one
; usb_controller structure. These structures are located sequentially
; in the memory: beginning from some page start, there is ohci_controller
; structure - this enforces hardware alignment requirements - and then
; usb_controller structure.
; * The code keeps pointer to usb_controller structure. The ohci_controller
; structure is addressed as [ptr + ohci_controller.field - sizeof.ohci_controller].
struct ohci_controller
; ------------------------------ hardware fields ------------------------------
InterruptTable rd 32
; Pointers to interrupt EDs. The hardware starts processing of periodic lists
; within the frame N from the ED pointed to by [InterruptTable+(N and 31)*4].
; See also the description of periodic lists inside ohci_pipe structure.
FrameNumber dw ?
; The current frame number. This field is written by hardware only.
; This field is read by ohci_process_deferred and ohci_irq to
; communicate when control/bulk processing needs to be temporarily
; stopped/restarted.
dw ?
; Padding. Written as zero at every update of FrameNumber.
DoneHead dd ?
; Physical pointer to the start of Done Queue.
; When the hardware updates this field, it sets bit 0 to one if there is
; unmasked interrupt pending.
rb 120
; Reserved for the hardware.
; ------------------------------ software fields ------------------------------
IntEDs ohci_static_ep
rb 62 * sizeof.ohci_static_ep
; Heads of 63 Periodic lists, see the description in usb_pipe.
ControlED ohci_static_ep
; Head of Control list, see the description in usb_pipe.
BulkED ohci_static_ep
; Head of Bulk list, see the description in usb_pipe.
MMIOBase dd ?
; Virtual address of memory-mapped area with OHCI registers OhciXxxReg.
PoweredUp db ?
; 1 in normal work, 0 during early phases of the initialization.
; This field is initialized to zero during memory allocation
; (see usb_init_controller), set to one by ohci_init when ports of the root hub
; are powered up, so connect/disconnect events can be handled.
rb 3 ; alignment
DoneList dd ?
; List of descriptors which were processed by the controller and now need
; to be finalized.
DoneListEndPtr dd ?
; Pointer to dword which should receive a pointer to the next item in DoneList.
; If DoneList is empty, this is a pointer to DoneList itself;
; otherwise, this is a pointer to NextTD field of the last item in DoneList.
EhciCompanion dd ?
; Pointer to usb_controller for EHCI companion, if any, or NULL.
ends
if ohci_controller.IntEDs mod 16
.err Static endpoint descriptors must be 16-bytes aligned inside ohci_controller
end if
; OHCI general transfer descriptor.
; * The structure describes transfers to be performed on Control, Bulk or
; Interrupt endpoints.
; * The structure includes two parts, the hardware part and the software part.
; * The hardware part consists of first 16 bytes and corresponds to
; the General Transfer Descriptor aka general TD from OHCI specification.
; * The hardware requires 16-bytes alignment of the hardware part, so
; the entire descriptor must be 16-bytes aligned. Since the allocator
; (usb_allocate_common) allocates memory sequentially from page start
; (aligned on 0x1000 bytes), block size for the allocator must be
; divisible by 16; usb1_allocate_generic_td ensures this.
struct ohci_gtd
; ------------------------------ hardware fields ------------------------------
; All addresses in this part are physical.
Flags dd ?
; 1. Lower 18 bits (bits 0-17) are ignored and not modified by the hardware.
; 2. Next bit (bit 18) is bufferRounding bit. If this bit is 0, then the last
; data packet must exactly fill the defined data buffer. If this bit is 1,
; then the last data packet may be smaller than the defined buffer without
; causing an error condition on the TD.
; 3. Next 2 bits (bits 19-20) are Direction field. This field indicates the
; direction of data flow. If the Direction field in the ED is OUT or IN,
; this field is ignored and the direction from the ED is used instead.
; Otherwise, 0 = SETUP, 1 = OUT, 2 = IN, 3 is reserved.
; 4. Next 3 bits (bits 21-23) are DelayInterrupt field. This field contains
; the interrupt delay count for this TD. When a TD is complete, the hardware
; may wait up to DelayInterrupt frames before generating an interrupt.
; If DelayInterrupt is 7 (maximum possible), then there is no interrupt
; associated with completion of this TD.
; 5. Next 2 bits (bits 24-25) are DataToggle field. This field is used to
; generate/compare the data PID value (DATA0 or DATA1). It is updated after
; each successful transmission/reception of a data packet. The bit 25
; is 0 when the data toggle value is acquired from the toggleCarry field in
; the ED and 1 when the data toggle value is taken from the bit 24.
; 6. Next 2 bits (bits 26-27) are ErrorCount field. For each transmission
; error, this value is incremented. If ErrorCount is 2 and another error
; occurs, the TD is retired with error. When a transaction completes without
; error, ErrorCount is reset to 0.
; 7. Upper 4 bits (bits 28-31) are ConditionCode field. This field contains
; the status of the last attempted transaction, one of USB_STATUS_* values.
CurBufPtr dd ?
; Physical address of the next memory location that will be accessed for
; transfer to/from the endpoint. 0 means zero-length data packet or that all
; bytes have been transferred.
NextTD dd ?
; This field has different meanings depending on the status of the descriptor.
; When the descriptor is queued for processing, but not yet processed:
; Physical address of the next TD for the endpoint.
; When the descriptor is processed by hardware, but not yet by software:
; Physical address of the previous processed TD.
; When the descriptor is processed by the IRQ handler, but not yet completed:
; Virtual pointer to the next processed TD.
BufEnd dd ?
; Physical address of the last byte in the buffer for this TD.
dd ? ; padding to align with uhci_gtd
ends
; OHCI isochronous transfer descriptor.
; * The structure describes transfers to be performed on Isochronous endpoints.
; * The structure includes two parts, the hardware part and the software part.
; * The hardware part consists of first 32 bytes and corresponds to
; the Isochronous Transfer Descriptor aka isochronous TD from OHCI
; specification.
; * The hardware requires 32-bytes alignment of the hardware part, so
; the entire descriptor must be 32-bytes aligned.
; * The isochronous endpoints are not supported yet, so only hardware part is
; defined at the moment.
struct ohci_itd
StartingFrame dw ?
; This field contains the low order 16 bits of the frame number in which the
; first data packet of the Isochronous TD is to be sent.
Flags dw ?
; 1. Lower 5 bits (bits 0-4) are ignored and not modified by the hardware.
; 2. Next 3 bits (bits 5-7) are DelayInterrupt field.
; 3. Next 3 bits (bits 8-10) are FrameCount field. The TD describes
; FrameCount+1 data packets.
; 4. Next bit (bit 11) is ignored and not modified by the hardware.
; 5. Upper 4 bits (bits 12-15) are ConditionCode field. This field contains
; the completion code, one of USB_STATUS_* values, when the TD is moved to
; the Done Queue.
BufPage0 dd ?
; Lower 12 bits are ignored and not modified by the hardware.
; With masked 12 bits this field is the physical page containing all buffers.
NextTD dd ?
; Physical address of the next TD in the transfer queue.
BufEnd dd ?
; Physical address of the last byte in the buffer.
OffsetArray rw 8
; Initialized by software, read by hardware: Offset for packet 0..7.
; Used to determine size and starting address of an isochronous data packet.
; Written by hardware, read by software: PacketStatusWord for packet 0..7.
; Contains completion code and, if applicable, size received for an isochronous
; data packet.
ends
; Description of OHCI-specific data and functions for
; controller-independent code.
; Implements the structure usb_hardware_func from hccommon.inc for OHCI.
iglobal
align 4
ohci_hardware_func:
dd USBHC_VERSION
dd 'OHCI'
dd sizeof.ohci_controller
dd ohci_kickoff_bios
dd ohci_init
dd ohci_process_deferred
dd ohci_set_device_address
dd ohci_get_device_address
dd ohci_port_disable
dd ohci_new_port.reset
dd ohci_set_endpoint_packet_size
dd ohci_alloc_pipe
dd ohci_free_pipe
dd ohci_init_pipe
dd ohci_unlink_pipe
dd ohci_alloc_gtd
dd ohci_free_gtd
dd ohci_alloc_transfer
dd ohci_insert_transfer
dd ohci_new_device
dd ohci_disable_pipe
dd ohci_enable_pipe
ohci_name db 'OHCI',0
endg
; =============================================================================
; =================================== Code ====================================
; =============================================================================
; Called once when driver is loading and once at shutdown.
; When loading, must initialize itself, register itself in the system
; and return eax = value obtained when registering.
proc start
virtual at esp
dd ? ; return address
.reason dd ? ; DRV_ENTRY or DRV_EXIT
.cmdline dd ? ; normally NULL
end virtual
cmp [.reason], DRV_ENTRY
jnz .nothing
mov ecx, ohci_ep_mutex
and dword [ecx-4], 0
invoke MutexInit
mov ecx, ohci_gtd_mutex
and dword [ecx-4], 0
invoke MutexInit
push esi edi
mov esi, [USBHCFunc]
mov edi, usbhc_api
movi ecx, sizeof.usbhc_func/4
rep movsd
pop edi esi
invoke RegUSBDriver, ohci_name, 0, ohci_hardware_func
.nothing:
ret
endp
; Controller-specific initialization function.
; Called from usb_init_controller. Initializes the hardware and
; OHCI-specific parts of software structures.
; eax = pointer to ohci_controller to be initialized
; [ebp-4] = pcidevice
proc ohci_init
; inherit some variables from the parent (usb_init_controller)
.devfn equ ebp - 4
.bus equ ebp - 3
; 1. Store pointer to ohci_controller for further use.
push eax
mov edi, eax
; 2. Initialize hardware fields of ohci_controller.
; Namely, InterruptTable needs to be initialized with
; physical addresses of heads of first 32 Periodic lists.
; Note that all static heads fit in one page, so one call
; to get_pg_addr is sufficient.
if (ohci_controller.IntEDs / 0x1000) <> (ohci_controller.BulkED / 0x1000)
.err assertion failed
end if
if ohci_controller.IntEDs >= 0x1000
.err assertion failed
end if
lea esi, [eax+ohci_controller.IntEDs+32*sizeof.ohci_static_ep]
invoke GetPgAddr
add eax, ohci_controller.IntEDs
movi ecx, 32
mov edx, ecx
@@:
stosd
add eax, sizeof.ohci_static_ep
loop @b
; 3. Initialize static heads ohci_controller.IntEDs, .ControlED, .BulkED.
; Use the loop over groups: first group consists of first 32 Periodic
; descriptors, next group consists of next 16 Periodic descriptors,
; ..., last group consists of the last Periodic descriptor.
; 3a. Prepare for the loop.
; make edi point to start of ohci_controller.IntEDs,
; other registers are already set.
; -128 fits in one byte, +128 does not fit.
sub edi, -128
; 3b. Loop over groups. On every iteration:
; edx = size of group, edi = pointer to the current group,
; esi = pointer to the next group, eax = physical address of the next group.
.init_static_eds:
; 3c. Get the size of the next group.
shr edx, 1
; 3d. Exit the loop if there is no next group.
jz .init_static_eds_done
; 3e. Initialize the first half of the current group.
; Advance edi to the second half.
push eax esi
call ohci_init_static_ep_group
pop esi eax
; 3f. Initialize the second half of the current group
; with the same values.
; Advance edi to the next group, esi/eax to the next of the next group.
call ohci_init_static_ep_group
jmp .init_static_eds
.init_static_eds_done:
; 3g. Initialize the head of the last Periodic list.
xor eax, eax
xor esi, esi
call ohci_init_static_endpoint
; 3i. Initialize the heads of Control and Bulk lists.
call ohci_init_static_endpoint
call ohci_init_static_endpoint
; 4. Create a virtual memory area to talk with the controller.
; 4a. Enable memory & bus master access.
invoke PciRead16, dword [.bus], dword [.devfn], 4
or al, 6
invoke PciWrite16, dword [.bus], dword [.devfn], 4, eax
; 4b. Read memory base address.
invoke PciRead32, dword [.bus], dword [.devfn], 10h
and al, not 0Fh
; 4c. Create mapping for physical memory. 256 bytes are sufficient.
invoke MapIoMem, eax, 100h, PG_SW+PG_NOCACHE
test eax, eax
jz .fail
stosd ; fill ohci_controller.MMIOBase
xchg eax, edi
; now edi = MMIOBase
; 5. Reset the controller if needed.
; 5a. Check operational state.
; 0 = reset, 1 = resume, 2 = operational, 3 = suspended
mov eax, [edi+OhciControlReg]
and al, 3 shl 6
cmp al, 2 shl 6
jz .operational
; 5b. State is not operational, reset is needed.
.reset:
; 5c. Save FmInterval register.
pushd [edi+OhciFmIntervalReg]
; 5d. Issue software reset and wait up to 10ms, checking status every 1 ms.
movi ecx, 1
movi edx, 10
mov [edi+OhciCommandStatusReg], ecx
@@:
mov esi, ecx
invoke Sleep
test [edi+OhciCommandStatusReg], ecx
jz .resetdone
dec edx
jnz @b
pop eax
dbgstr 'controller reset timeout'
jmp .fail_unmap
.resetdone:
; 5e. Restore FmInterval register.
pop eax
mov edx, eax
and edx, 3FFFh
jz .setfminterval
cmp dx, 2EDFh ; default value?
jnz @f ; assume that BIOS has configured the value
.setfminterval:
mov eax, 27792EDFh ; default value
@@:
mov [edi+OhciFmIntervalReg], eax
; 5f. Set PeriodicStart to 90% of FmInterval.
movzx eax, ax
; Two following lines are equivalent to eax = floor(eax * 0.9)
; for any 0 <= eax < 1C71C71Dh, which of course is far from maximum 0FFFFh.
mov edx, 0E6666667h
mul edx
mov [edi+OhciPeriodicStartReg], edx
.operational:
; 6. Setup controller registers.
pop esi ; restore pointer to ohci_controller saved in step 1
; 6a. Physical address of HCCA.
mov eax, esi
invoke GetPgAddr
mov [edi+OhciHCCAReg], eax
; 6b. Transition to operational state and clear all Enable bits.
mov cl, 2 shl 6
mov [edi+OhciControlReg], ecx
; 6c. Physical addresses of head of Control and Bulk lists.
if ohci_controller.BulkED >= 0x1000
.err assertion failed
end if
add eax, ohci_controller.ControlED
mov [edi+OhciControlHeadEDReg], eax
add eax, ohci_controller.BulkED - ohci_controller.ControlED
mov [edi+OhciBulkHeadEDReg], eax
; 6d. Zero Head registers: there are no active Control and Bulk descriptors yet.
xor eax, eax
; mov [edi+OhciPeriodCurrentEDReg], eax
mov [edi+OhciControlCurrentEDReg], eax
mov [edi+OhciBulkCurrentEDReg], eax
; mov [edi+OhciDoneHeadReg], eax
; 6e. Enable processing of all lists with control:bulk ratio = 1:1.
mov dword [edi+OhciControlReg], 10111100b
; 7. Find the EHCI companion.
; Note: this assumes that EHCI is initialized before USB1 companions.
add esi, sizeof.ohci_controller
mov ebx, dword [.devfn]
invoke usbhc_api.usb_find_ehci_companion
mov [esi+ohci_controller.EhciCompanion-sizeof.ohci_controller], eax
; 8. Get number of ports.
mov eax, [edi+OhciRhDescriptorAReg]
and eax, 0xF
mov [esi+usb_controller.NumPorts], eax
; 9. Initialize DoneListEndPtr to point to DoneList.
lea eax, [esi+ohci_controller.DoneList-sizeof.ohci_controller]
mov [esi+ohci_controller.DoneListEndPtr-sizeof.ohci_controller], eax
; 10. Hook interrupt.
invoke PciRead8, dword [.bus], dword [.devfn], 3Ch
; al = IRQ
movzx eax, al
invoke AttachIntHandler, eax, ohci_irq, esi
; 11. Enable controller interrupt on HcDoneHead writeback and RootHubStatusChange.
mov dword [edi+OhciInterruptEnableReg], 80000042h
DEBUGF 1,'K : OHCI controller at %x:%x with %d ports initialized\n',[.bus]:2,[.devfn]:2,[esi+usb_controller.NumPorts]
; 12. Initialize ports of the controller.
; 12a. Initiate power up, disable all ports, clear all "changed" bits.
mov dword [edi+OhciRhStatusReg], 10000h ; SetGlobalPower
xor ecx, ecx
@@:
mov dword [edi+OhciRhPortStatusReg+ecx*4], 1F0101h ; SetPortPower+ClearPortEnable+clear "changed" bits
inc ecx
cmp ecx, [esi+usb_controller.NumPorts]
jb @b
; 12b. Wait for power up.
; VirtualBox has AReg == 0, delay_ms doesn't like zero value; ignore zero delay
push esi
mov esi, [edi+OhciRhDescriptorAReg]
shr esi, 24
add esi, esi
jz @f
invoke Sleep
@@:
pop esi
; 12c. Ports are powered up; now it is ok to process connect/disconnect events.
mov [esi+ohci_controller.PoweredUp-sizeof.ohci_controller], 1
; IRQ handler doesn't accept connect/disconnect events before this point
; 12d. We could miss some events while waiting for powering up;
; scan all ports manually and check for connected devices.
xor ecx, ecx
.port_loop:
test dword [edi+OhciRhPortStatusReg+ecx*4], 1
jz .next_port
; There is a connected device; mark the port as 'connected'
; and save the connected time.
; Note that ConnectedTime must be set before 'connected' mark,
; otherwise the code in ohci_process_deferred could use incorrect time.
invoke GetTimerTicks
mov [esi+usb_controller.ConnectedTime+ecx*4], eax
lock bts [esi+usb_controller.NewConnected], ecx
.next_port:
inc ecx
cmp ecx, [esi+usb_controller.NumPorts]
jb .port_loop
; 13. Return pointer to usb_controller.
xchg eax, esi
ret
.fail_unmap:
; On error after step 5, release the virtual memory area.
invoke FreeKernelSpace, edi
.fail:
; On error, free the ohci_controller structure and return zero.
; Note that the pointer was placed in the stack at step 1.
; Note also that there can be no errors after step 6,
; where that pointer is popped from the stack.
pop ecx
.nothing:
xor eax, eax
ret
endp
; Helper procedure for step 3 of ohci_init.
; Initializes the static head of one list.
; eax = physical address of the "next" list, esi = pointer to the "next" list,
; edi = pointer to head to initialize.
; Advances edi to the next head, keeps eax/esi.
proc ohci_init_static_endpoint
mov byte [edi+ohci_static_ep.Flags+1], 1 shl (14 - 8) ; sKip this endpoint
mov [edi+ohci_static_ep.NextED], eax
mov [edi+ohci_static_ep.NextList], esi
add edi, ohci_static_ep.SoftwarePart
invoke usbhc_api.usb_init_static_endpoint
add edi, sizeof.ohci_static_ep - ohci_static_ep.SoftwarePart
ret
endp
; Helper procedure for step 3 of ohci_init.
; Initializes one half of group of static heads.
; edx = size of the next group = half of size of the group,
; edi = pointer to the group, eax = physical address of the next group,
; esi = pointer to the next group.
; Advances eax, esi, edi to next group, keeps edx.
proc ohci_init_static_ep_group
push edx
@@:
call ohci_init_static_endpoint
add eax, sizeof.ohci_static_ep
add esi, sizeof.ohci_static_ep
dec edx
jnz @b
pop edx
ret
endp
; Controller-specific pre-initialization function: take ownership from BIOS.
; Some BIOSes, although not all of them, provide legacy emulation
; for USB keyboard and/or mice as PS/2-devices. In this case,
; we must notify the BIOS that we don't need that emulation and know how to
; deal with USB devices.
proc ohci_kickoff_bios
; 1. Get the physical address of MMIO registers.
invoke PciRead32, dword [esi+PCIDEV.bus], dword [esi+PCIDEV.devfn], 10h
and al, not 0Fh
; 2. Create mapping for physical memory. 256 bytes are sufficient.
invoke MapIoMem, eax, 100h, PG_SW+PG_NOCACHE
test eax, eax
jz .nothing
; 3. Some BIOSes enable controller interrupts as a result of giving
; controller away. At this point the system knows nothing about how to serve
; OHCI interrupts, so such an interrupt will send the system into an infinite
; loop handling the same IRQ again and again. Thus, we need to block OHCI
; interrupts. We can't do this at the controller level until step 5,
; because the controller is currently owned by BIOS, so we block all hardware
; interrupts on this processor until step 5.
pushf
cli
; 4. Take the ownership over the controller.
; 4a. Check whether BIOS handles this controller at all.
mov edx, 100h
test dword [eax+OhciControlReg], edx
jz .has_ownership
; 4b. Send "take ownership" command to the BIOS.
; (This should generate SMI, BIOS should release its ownership in SMI handler.)
mov dword [eax+OhciCommandStatusReg], 8
; 4c. Wait for result no more than 50 ms, checking for status every 1 ms.
movi ecx, 50
@@:
test dword [eax+OhciControlReg], edx
jz .has_ownership
push esi
movi esi, 1
invoke Sleep
pop esi
loop @b
dbgstr 'warning: taking OHCI ownership from BIOS timeout'
.has_ownership:
; 5. Disable all controller interrupts until the system will be ready to
; process them.
mov dword [eax+OhciInterruptDisableReg], 0C000007Fh
; 6. Now we can unblock interrupts in the processor.
popf
; 7. Release memory mapping created in step 2 and return.
invoke FreeKernelSpace, eax
.nothing:
ret
endp
; IRQ handler for OHCI controllers.
ohci_irq.noint:
; Not our interrupt: restore registers and return zero.
xor eax, eax
pop edi esi ebx
ret
proc ohci_irq
push ebx esi edi ; save used registers to be cdecl
virtual at esp
rd 3 ; saved registers
dd ? ; return address
.controller dd ?
end virtual
; 1. ebx will hold whether some deferred processing is needed,
; that cannot be done from the interrupt handler. Initialize to zero.
xor ebx, ebx
; 2. Get the mask of events which should be processed.
mov esi, [.controller]
mov edi, [esi+ohci_controller.MMIOBase-sizeof.ohci_controller]
mov eax, [edi+OhciInterruptStatusReg]
; 3. Check whether that interrupt has been generated by our controller.
; (One IRQ can be shared by several devices.)
and eax, [edi+OhciInterruptEnableReg]
jz .noint
; 4. Get the physical pointer to the last processed descriptor.
; All processed descriptors form single-linked list from last to first
; with the help of NextTD field. The list is restarted every time when
; the controller writes to DoneHead, so grab the pointer now (before the next
; step) or it could be lost (the controller could write new value to DoneHead
; any time after WorkDone bit is cleared in OhciInterruptStatusReg).
mov ecx, [esi+ohci_controller.DoneHead-sizeof.ohci_controller]
and ecx, not 1
; 5. Clear the events we know of.
; Note that this should be done before processing of events:
; new events could arise while we are processing those, this way we won't lose
; them (the controller would generate another interrupt
; after completion of this one).
mov [edi+OhciInterruptStatusReg], eax
; 6. Save the mask of events for further reference.
push eax
; 7. Handle 'transfer is done' events.
; 7a. Test whether there are such events.
test al, 2
jz .skip_donehead
; There are some 'transfer is done' events, processed descriptors are linked
; through physical addresses in the reverse order.
; We can't do much in an interrupt handler, since callbacks could require
; waiting for locks and that can't be done in an interrupt handler.
; However, we can't also just defer all work to the USB thread, since
; it is possible that previous lists are not yet processed and it is hard
; to store unlimited number of list heads. Thus, we reverse the current list,
; append it to end of the previous list (if there is one) and defer other
; processing to the USB thread; this way there always is no more than one list
; (possibly joined from several controller-reported lists).
; The list traversal requires converting physical addresses to virtual pointers,
; so we may as well store pointers instead of physical addresses.
; 7b. Prepare for the reversing loop.
push ebx
xor ebx, ebx
test ecx, ecx
jz .tddone
mov eax, [ohci_gtd_first_page]
invoke usbhc_api.usb_td_to_virt
test eax, eax
jz .tddone
lea edx, [eax+ohci_gtd.NextTD]
; 7c. Reverse the list, converting physical to virtual. On every iteration:
; ecx = physical address of the current item
; eax = virtual pointer to the current item
; edx = virtual pointer to the last item.NextTD (first in the reverse list)
; ebx = virtual pointer to the next item (previous in the reverse list)
.tdloop:
mov ecx, [eax+ohci_gtd.NextTD]
mov [eax+ohci_gtd.NextTD], ebx
lea ebx, [eax+sizeof.ohci_gtd]
test ecx, ecx
jz .tddone
mov eax, [ohci_gtd_first_page]
invoke usbhc_api.usb_td_to_virt
test eax, eax
jnz .tdloop
.tddone:
mov ecx, ebx
pop ebx
; 7d. The list is reversed,
; ecx = pointer to the first item, edx = pointer to the last item.NextTD.
; If the list is empty (unusual case), step 7 is done.
test ecx, ecx
jz .skip_donehead
; 7e. Otherwise, append this list to the end of previous one.
; Note that in theory the interrupt handler and the USB thread
; could execute in parallel.
.append_restart:
; Atomically get DoneListEndPtr in eax and set it to edx.
mov eax, [esi+ohci_controller.DoneListEndPtr-sizeof.ohci_controller]
lock cmpxchg [esi+ohci_controller.DoneListEndPtr-sizeof.ohci_controller], edx
jnz .append_restart
; Store pointer to the new list.
; Note: we cannot perform any operations with [DoneListEndPtr]
; until we switch DoneListEndPtr to a new descriptor:
; it is possible that after first line of .append_restart loop
; ohci_process_deferred obtains the control, finishes processing
; of the old list, sets DoneListEndPtr to address of DoneList,
; frees all old descriptors, so eax would point to invalid location.
; This way, .append_restart loop would detect that DoneListEndPtr
; has changed, so eax needs to be re-read.
mov [eax], ecx
; 7f. Notify the USB thread that there is new work.
inc ebx
.skip_donehead:
; 8. Handle start-of-frame events.
; 8a. Test whether there are such events.
test byte [esp], 4
jz .skip_sof
; We enable SOF interrupt only when some pipes are waiting after changes.
spin_lock_irqsave [esi+usb_controller.WaitSpinlock]
; 8b. Make sure that there was at least one frame update
; since the request. If not, wait for the next SOF.
movzx eax, [esi+ohci_controller.FrameNumber-sizeof.ohci_controller]
cmp eax, [esi+usb_controller.StartWaitFrame]
jz .sof_unlock
; 8c. Copy WaitPipeRequest* to ReadyPipeHead*.
mov eax, [esi+usb_controller.WaitPipeRequestAsync]
mov [esi+usb_controller.ReadyPipeHeadAsync], eax
mov eax, [esi+usb_controller.WaitPipeRequestPeriodic]
mov [esi+usb_controller.ReadyPipeHeadPeriodic], eax
; 8d. It is possible that pipe change is due to removal and
; Control/BulkCurrentED registers still point to one of pipes to be removed.
; The code responsible for disconnect events has temporarily stopped
; Control/Bulk processing, so it is safe to clear Control/BulkCurrentED.
; After that, restart processing.
xor edx, edx
mov [edi+OhciControlCurrentEDReg], edx
mov [edi+OhciBulkCurrentEDReg], edx
mov dword [edi+OhciCommandStatusReg], 6
or dword [edi+OhciControlReg], 30h
; 8e. Disable further interrupts on SOF.
; Note: OhciInterruptEnableReg/OhciInterruptDisableReg have unusual semantics.
mov dword [edi+OhciInterruptDisableReg], 4
; Notify the USB thread that there is new work (with pipes from ReadyPipeHead*).
inc ebx
.sof_unlock:
spin_unlock_irqrestore [esi+usb_controller.RemoveSpinlock]
.skip_sof:
; Handle roothub events.
; 9. Test whether there are such events.
test byte [esp], 40h
jz .skip_roothub
; 10. Check the status of the roothub itself.
; 10a. Global overcurrent?
test dword [edi+OhciRhStatusReg], 2
jz @f
; Note: this needs work.
dbgstr 'global overcurrent'
@@:
; 10b. Clear roothub events.
mov dword [edi+OhciRhStatusReg], 80020000h
; 11. Check the status of individual ports.
; Look for connect/disconnect and reset events.
; 11a. Prepare for the loop: start from port 0.
xor ecx, ecx
.portloop:
; 11b. Get the port status and changes of it.
; Accumulate change information.
; Look to "11.12.3 Port Change Information Processing" of the USB2 spec.
xor eax, eax
.accloop:
mov edx, [edi+OhciRhPortStatusReg+ecx*4]
xor ax, ax
or eax, edx
test edx, 1F0000h
jz .accdone
mov dword [edi+OhciRhPortStatusReg+ecx*4], 1F0000h
jmp .accloop
.accdone:
; debugging output, not needed for work
; test eax, 1F0000h
; jz @f
; DEBUGF 1,'K : ohci %x status of port %d is %x\n',esi,ecx,eax
;@@:
; 11c. Ignore any events until all ports are powered up.
; They will be processed by ohci_init.
cmp [esi+ohci_controller.PoweredUp-sizeof.ohci_controller], 0
jz .nextport
; Handle changing of connection status.
test eax, 10000h
jz .nocsc
; There was a connect or disconnect event at this port.
; 11d. Disconnect the old device on this port, if any.
; if the port was resetting, indicate fail and signal
cmp cl, [esi+usb_controller.ResettingPort]
jnz @f
mov [esi+usb_controller.ResettingStatus], -1
inc ebx
@@:
lock bts [esi+usb_controller.NewDisconnected], ecx
; notify the USB thread that new work is waiting
inc ebx
; 11e. Change connected status. For the connection event, also
; store the connection time; any further processing is permitted only
; after USB_CONNECT_DELAY ticks.
test al, 1
jz .disconnect
; Note: ConnectedTime must be stored before setting the 'connected' bit,
; otherwise ohci_process_deferred could use an old time.
invoke GetTimerTicks
mov [esi+usb_controller.ConnectedTime+ecx*4], eax
lock bts [esi+usb_controller.NewConnected], ecx
jmp .nextport
.disconnect:
lock btr [esi+usb_controller.NewConnected], ecx
jmp .nextport
.nocsc:
; 11f. Process 'reset done' events.
test eax, 100000h
jz .nextport
test al, 10h
jnz .nextport
invoke GetTimerTicks
mov [esi+usb_controller.ResetTime], eax
mov [esi+usb_controller.ResettingStatus], 2
inc ebx
.nextport:
; 11g. Continue the loop for the next port.
inc ecx
cmp ecx, [esi+usb_controller.NumPorts]
jb .portloop
.skip_roothub:
; 12. Restore the stack after step 6.
pop eax
; 13. Notify the USB thread if some deferred processing is required.
invoke usbhc_api.usb_wakeup_if_needed
; 14. Interrupt processed; return something non-zero.
mov al, 1
pop edi esi ebx ; restore used registers to be stdcall
ret
endp
; This procedure is called from usb_set_address_callback
; and stores USB device address in the ohci_pipe structure.
; in: esi -> usb_controller, ebx -> usb_pipe, cl = address
proc ohci_set_device_address
mov byte [ebx+ohci_pipe.Flags-sizeof.ohci_pipe], cl
; Wait until the hardware will forget the old value.
jmp [usbhc_api.usb_subscribe_control]
endp
; This procedure returns USB device address from the usb_pipe structure.
; in: esi -> usb_controller, ebx -> usb_pipe
; out: eax = endpoint address
proc ohci_get_device_address
mov eax, [ebx+ohci_pipe.Flags-sizeof.ohci_pipe]
and eax, 7Fh
ret
endp
; This procedure is called from usb_set_address_callback
; if the device does not accept SET_ADDRESS command and needs
; to be disabled at the port level.
; in: esi -> usb_controller, ecx = port
proc ohci_port_disable
mov edx, [esi+ohci_controller.MMIOBase-sizeof.ohci_controller]
mov dword [edx+OhciRhPortStatusReg+ecx*4], 1
ret
endp
; This procedure is called from usb_get_descr8_callback when
; the packet size for zero endpoint becomes known and
; stores the packet size in ohci_pipe structure.
; in: esi -> usb_controller, ebx -> usb_pipe, ecx = packet size
proc ohci_set_endpoint_packet_size
mov byte [ebx+ohci_pipe.Flags+2-sizeof.ohci_pipe], cl
; Wait until the hardware will forget the old value.
jmp [usbhc_api.usb_subscribe_control]
endp
; This procedure is called from API usb_open_pipe and processes
; the controller-specific part of this API. See docs.
; in: edi -> usb_pipe for target, ecx -> usb_pipe for config pipe,
; esi -> usb_controller, eax -> usb_gtd for the first TD,
; [ebp+12] = endpoint, [ebp+16] = maxpacket, [ebp+20] = type
proc ohci_init_pipe
virtual at ebp-12
.speed db ?
rb 3
.bandwidth dd ?
.target dd ?
rd 2
.config_pipe dd ?
.endpoint dd ?
.maxpacket dd ?
.type dd ?
.interval dd ?
end virtual
; 1. Initialize the queue of transfer descriptors: empty.
sub eax, sizeof.ohci_gtd
invoke GetPhysAddr
mov [edi+ohci_pipe.TailP-sizeof.ohci_pipe], eax
mov [edi+ohci_pipe.HeadP-sizeof.ohci_pipe], eax
; 2. Generate ohci_pipe.Flags, see the description in ohci_pipe.
mov eax, [ecx+ohci_pipe.Flags-sizeof.ohci_pipe]
and eax, 0x207F ; keep Speed bit and FunctionAddress
mov edx, [.endpoint]
and edx, 15
shl edx, 7
or eax, edx
mov [edi+ohci_pipe.Flags-sizeof.ohci_pipe], eax
bt eax, 13
setc [.speed]
mov eax, [.maxpacket]
mov word [edi+ohci_pipe.Flags+2-sizeof.ohci_pipe], ax
cmp [.type], CONTROL_PIPE
jz @f
test byte [.endpoint], 80h
setnz al
inc eax
shl al, 3
or byte [edi+ohci_pipe.Flags+1-sizeof.ohci_pipe], al
@@:
; 3. Insert the new pipe to the corresponding list of endpoints.
; 3a. Use Control list for control pipes, Bulk list for bulk pipes.
lea edx, [esi+ohci_controller.ControlED.SoftwarePart-sizeof.ohci_controller]
cmp [.type], BULK_PIPE
jb .insert ; control pipe
lea edx, [esi+ohci_controller.BulkED.SoftwarePart-sizeof.ohci_controller]
jz .insert ; bulk pipe
.interrupt_pipe:
; 3b. For interrupt pipes, let the scheduler select the appropriate list
; based on the current bandwidth distribution and the requested bandwidth.
; This could fail if the requested bandwidth is not available;
; if so, return an error.
lea edx, [esi + ohci_controller.IntEDs - sizeof.ohci_controller]
lea eax, [esi + ohci_controller.IntEDs + 32*sizeof.ohci_static_ep - sizeof.ohci_controller]
movi ecx, 64
call usb1_select_interrupt_list
test edx, edx
jz .return0
; 3c. Insert endpoint at edi to the head of list in edx.
; Inserting to tail would work as well,
; but let's be consistent with other controllers.
.insert:
mov [edi+usb_pipe.BaseList], edx
mov ecx, [edx+usb_pipe.NextVirt]
mov [edi+usb_pipe.NextVirt], ecx
mov [edi+usb_pipe.PrevVirt], edx
mov [ecx+usb_pipe.PrevVirt], edi
mov [edx+usb_pipe.NextVirt], edi
mov ecx, [edx+ohci_pipe.NextED-sizeof.ohci_pipe]
mov [edi+ohci_pipe.NextED-sizeof.ohci_pipe], ecx
lea eax, [edi-sizeof.ohci_pipe]
invoke GetPhysAddr
mov [edx+ohci_pipe.NextED-sizeof.ohci_pipe], eax
; 4. Return something non-zero.
ret
.return0:
xor eax, eax
ret
endp
; This function is called from ohci_process_deferred when
; a new device was connected at least USB_CONNECT_DELAY ticks
; and therefore is ready to be configured.
; ecx = port, esi -> usb_controller
proc ohci_new_port
; test whether we are configuring another port
; if so, postpone configuring and return
bts [esi+usb_controller.PendingPorts], ecx
cmp [esi+usb_controller.ResettingPort], -1
jnz .nothing
btr [esi+usb_controller.PendingPorts], ecx
; fall through to ohci_new_port.reset
; This function is called from usb_test_pending_port.
; It starts reset signalling for the port. Note that in USB first stages
; of configuration can not be done for several ports in parallel.
.reset:
; reset port
and [esi+usb_controller.ResettingHub], 0
mov [esi+usb_controller.ResettingPort], cl
; Note: setting status must be the last action:
; it is possible that the device has been disconnected
; after timeout of USB_CONNECT_DELAY but before call to ohci_new_port.
; In this case, ohci_irq would not set reset status to 'failed',
; because ohci_irq would not know that this port is to be reset.
; However, the hardware would generate another interrupt
; in a response to reset a disconnected port, and this time
; ohci_irq knows that it needs to generate 'reset failed' event
; (because ResettingPort is now filled).
push edi
mov edi, [esi+ohci_controller.MMIOBase-sizeof.ohci_controller]
mov dword [edi+OhciRhPortStatusReg+ecx*4], 10h
pop edi
.nothing:
ret
endp
; This procedure is called from the several places in main USB code
; and allocates required packets for the given transfer.
; ebx = pipe, other parameters are passed through the stack:
; buffer,size = data to transfer
; flags = same as in usb_open_pipe: bit 0 = allow short transfer, other bits reserved
; td = pointer to the current end-of-queue descriptor
; direction =
; 0000b for normal transfers,
; 1000b for control SETUP transfer,
; 1101b for control OUT transfer,
; 1110b for control IN transfer
; returns eax = pointer to the new end-of-queue descriptor
; (not included in the queue itself) or 0 on error
proc ohci_alloc_transfer stdcall uses edi, \
buffer:dword, size:dword, flags:dword, td:dword, direction:dword
locals
origTD dd ?
packetSize dd ? ; must be the last variable, see usb_init_transfer
endl
; 1. Save original value of td:
; it will be useful for rollback if something would fail.
mov eax, [td]
mov [origTD], eax
; One transfer descriptor can describe up to two pages.
; In the worst case (when the buffer is something*1000h+0FFFh)
; this corresponds to 1001h bytes. If the requested size is
; greater, we should split the transfer into several descriptors.
; Boundaries to split must be multiples of endpoint transfer size
; to avoid short packets except in the end of the transfer.
cmp [size], 1001h
jbe .lastpacket
; 2. While the remaining data cannot fit in one packet,
; allocate full-sized descriptors.
; 2a. Calculate size of one descriptor: must be a multiple of transfer size
; and must be not greater than 1001h.
movzx ecx, word [ebx+ohci_pipe.Flags+2-sizeof.ohci_pipe]
mov eax, 1001h
xor edx, edx
mov edi, eax
div ecx
sub edi, edx
; 2b. Allocate in loop.
mov [packetSize], edi
.fullpackets:
call ohci_alloc_packet
test eax, eax
jz .fail
mov [td], eax
add [buffer], edi
sub [size], edi
cmp [size], 1001h
ja .fullpackets
; 3. The remaining data can fit in one descriptor;
; allocate the last descriptor with size = size of remaining data.
.lastpacket:
mov eax, [size]
mov [packetSize], eax
call ohci_alloc_packet
test eax, eax
jz .fail
; 4. Enable an immediate interrupt on completion of the last packet.
and byte [ecx+ohci_gtd.Flags+2-sizeof.ohci_gtd], not (7 shl (21-16))
; 5. If a short transfer is ok for a caller, set the corresponding bit in
; the last descriptor, but not in others.
; Note: even if the caller says that short transfers are ok,
; all packets except the last one are marked as 'must be complete':
; if one of them will be short, the software intervention is needed
; to skip remaining packets; ohci_process_finalized_td will handle this
; transparently to the caller.
test [flags], 1
jz @f
or byte [ecx+ohci_gtd.Flags+2-sizeof.ohci_gtd], 1 shl (18-16)
@@:
ret
.fail:
mov edi, ohci_hardware_func
mov eax, [td]
invoke usbhc_api.usb_undo_tds, [origTD]
xor eax, eax
ret
endp
; Helper procedure for ohci_alloc_transfer.
; Allocates and initializes one transfer descriptor.
; ebx = pipe, other parameters are passed through the stack;
; fills the current last descriptor and
; returns eax = next descriptor (not filled).
proc ohci_alloc_packet
; inherit some variables from the parent ohci_alloc_transfer
virtual at ebp-8
.origTD dd ?
.packetSize dd ?
rd 2
.buffer dd ?
.transferSize dd ?
.Flags dd ?
.td dd ?
.direction dd ?
end virtual
; 1. Allocate the next TD.
call ohci_alloc_gtd
test eax, eax
jz .nothing
; 2. Initialize controller-independent parts of both TDs.
push eax
invoke usbhc_api.usb_init_transfer
pop eax
; 3. Save the returned value (next descriptor).
push eax
; 4. Store the physical address of the next descriptor.
sub eax, sizeof.ohci_gtd
invoke GetPhysAddr
mov [ecx+ohci_gtd.NextTD-sizeof.ohci_gtd], eax
; 5. For zero-length transfers, store zero in both fields for buffer addresses.
; Otherwise, fill them with real values.
xor eax, eax
mov [ecx+ohci_gtd.CurBufPtr-sizeof.ohci_gtd], eax
mov [ecx+ohci_gtd.BufEnd-sizeof.ohci_gtd], eax
cmp [.packetSize], eax
jz @f
mov eax, [.buffer]
invoke GetPhysAddr
mov [ecx+ohci_gtd.CurBufPtr-sizeof.ohci_gtd], eax
mov eax, [.buffer]
add eax, [.packetSize]
dec eax
invoke GetPhysAddr
mov [ecx+ohci_gtd.BufEnd-sizeof.ohci_gtd], eax
@@:
; 6. Generate Flags field:
; - set bufferRounding (bit 18) to zero = disallow short transfers;
; for the last transfer in a row, ohci_alloc_transfer would set the real value;
; - set Direction (bits 19-20) to lower 2 bits of [.direction];
; - set DelayInterrupt (bits 21-23) to 7 = do not generate interrupt;
; for the last transfer in a row, ohci_alloc_transfer would set the real value;
; - set DataToggle (bits 24-25) to next 2 bits of [.direction];
; - set ConditionCode (bits 28-31) to 1111b as a indicator that there was no
; attempts to perform this transfer yet;
; - zero all other bits.
mov eax, [.direction]
mov edx, eax
and eax, 3
shl eax, 19
and edx, (3 shl 2)
shl edx, 24 - 2
lea eax, [eax + edx + (7 shl 21) + (15 shl 28)]
mov [ecx+ohci_gtd.Flags-sizeof.ohci_gtd], eax
; 7. Restore the returned value saved in step 3.
pop eax
.nothing:
ret
endp
; This procedure is called from the several places in main USB code
; and activates the transfer which was previously allocated by
; ohci_alloc_transfer.
; ecx -> last descriptor for the transfer, ebx -> usb_pipe
proc ohci_insert_transfer
; 1. Advance the queue of transfer descriptors.
mov eax, [ecx+ohci_gtd.NextTD-sizeof.ohci_gtd]
mov [ebx+ohci_pipe.TailP-sizeof.ohci_pipe], eax
; 2. For control and bulk pipes, notify the controller that
; there is new work in control/bulk queue respectively.
ohci_notify_new_work:
mov edx, [ebx+usb_pipe.Controller]
mov edx, [edx+ohci_controller.MMIOBase-sizeof.ohci_controller]
cmp [ebx+usb_pipe.Type], CONTROL_PIPE
jz .control
cmp [ebx+usb_pipe.Type], BULK_PIPE
jnz .nothing
.bulk:
mov dword [edx+OhciCommandStatusReg], 4
jmp .nothing
.control:
mov dword [edx+OhciCommandStatusReg], 2
.nothing:
ret
endp
; This function is called from ohci_process_deferred when
; a new device has been reset and needs to be configured.
proc ohci_port_after_reset
; 1. Get the status.
; If reset has been failed (device disconnected during reset),
; continue to next device (if there is one).
xor eax, eax
xchg al, [esi+usb_controller.ResettingStatus]
test al, al
jns @f
jmp [usbhc_api.usb_test_pending_port]
@@:
; If the controller has disabled the port (e.g. overcurrent),
; continue to next device (if there is one).
movzx ecx, [esi+usb_controller.ResettingPort]
mov eax, [edi+OhciRhPortStatusReg+ecx*4]
test al, 2
jnz @f
DEBUGF 1,'K : USB port disabled after reset, status=%x\n',eax
jmp [usbhc_api.usb_test_pending_port]
@@:
push ecx
; 2. Get LowSpeed bit to bit 0 of eax and call the worker procedure
; to notify the protocol layer about new OHCI device.
mov eax, [edi+OhciRhPortStatusReg+ecx*4]
DEBUGF 1,'K : port_after_reset, status of port %d is %x\n',ecx,eax
shr eax, 9
call ohci_new_device
pop ecx
; 3. If something at the protocol layer has failed
; (no memory, no bus address), disable the port and stop the initialization.
test eax, eax
jnz .nothing
.disable_exit:
mov dword [edi+OhciRhPortStatusReg+ecx*4], 1
jmp [usbhc_api.usb_test_pending_port]
.nothing:
ret
endp
; This procedure is called from uhci_port_init and from hub support code
; when a new device is connected and has been reset.
; It calls usb_new_device at the protocol layer with correct parameters.
; in: esi -> usb_controller, eax = speed;
; OHCI is USB1 device, so only low bit of eax (LowSpeed) is used.
proc ohci_new_device
; 1. Clear all bits of speed except bit 0.
and eax, 1
; 2. Store the speed for the protocol layer.
mov [esi+usb_controller.ResettingSpeed], al
; 3. Create pseudo-pipe in the stack.
; See ohci_init_pipe: only .Controller and .Flags fields are used.
shl eax, 13
push esi ; .Controller
mov ecx, esp
sub esp, 12 ; ignored fields
push eax ; .Flags
; 4. Notify the protocol layer.
invoke usbhc_api.usb_new_device
; 5. Cleanup the stack after step 3 and return.
add esp, 20
ret
endp
; This procedure is called in the USB thread from usb_thread_proc,
; processes regular actions and those actions which can't be safely done
; from interrupt handler.
; Returns maximal time delta before the next call.
proc ohci_process_deferred
push ebx edi ; save used registers to be stdcall
; 1. Initialize the return value.
push -1
; 2. Process disconnect events.
; Capture NewConnected mask in the state before disconnect processing;
; IRQ handler could asynchronously signal disconnect+connect event,
; connect events should be handled after disconnect events.
push [esi+usb_controller.NewConnected]
invoke usbhc_api.usb_disconnect_stage2
; 3. Check for connected devices.
; If there is a connected device which was connected less than
; USB_CONNECT_DELAY ticks ago, plan to wake up when the delay will be over.
; Otherwise, call ohci_new_port.
mov edi, [esi+ohci_controller.MMIOBase-sizeof.ohci_controller]
xor ecx, ecx
cmp [esp], ecx
jz .skip_newconnected
.portloop:
bt [esp], ecx
jnc .noconnect
; If this port is shared with the EHCI companion and we see the connect event,
; then the device is USB1 dropped by EHCI,
; so EHCI has already waited for debounce delay, we can proceed immediately.
cmp [esi+ohci_controller.EhciCompanion-sizeof.ohci_controller], 0
jz .portloop.test_time
dbgstr 'port is shared with EHCI, skipping initial debounce'
jmp .connected
.portloop.test_time:
invoke GetTimerTicks
sub eax, [esi+usb_controller.ConnectedTime+ecx*4]
sub eax, USB_CONNECT_DELAY
jge .connected
neg eax
cmp [esp+4], eax
jb .nextport
mov [esp+4], eax
jmp .nextport
.connected:
lock btr [esi+usb_controller.NewConnected], ecx
jnc .nextport
call ohci_new_port
.noconnect:
.nextport:
inc ecx
cmp ecx, [esi+usb_controller.NumPorts]
jb .portloop
.skip_newconnected:
pop eax
; 4. Check for end of reset signalling. If so, call ohci_port_after_reset.
cmp [esi+usb_controller.ResettingStatus], 2
jnz .no_reset_recovery
invoke GetTimerTicks
sub eax, [esi+usb_controller.ResetTime]
sub eax, USB_RESET_RECOVERY_TIME
jge .reset_done
neg eax
cmp [esp], eax
jb .skip_roothub
mov [esp], eax
jmp .skip_roothub
.no_reset_recovery:
cmp [esi+usb_controller.ResettingStatus], 0
jz .skip_roothub
.reset_done:
call ohci_port_after_reset
.skip_roothub:
; 5. Finalize transfers processed by hardware.
; It is better to perform this step after processing disconnect events,
; although not strictly obligatory. This way, an active transfer aborted
; due to disconnect would be handled with more specific USB_STATUS_CLOSED,
; not USB_STATUS_NORESPONSE.
; Loop over all items in DoneList, call ohci_process_finalized_td for each.
xor ebx, ebx
xchg ebx, [esi+ohci_controller.DoneList-sizeof.ohci_controller]
.tdloop:
test ebx, ebx
jz .tddone
call ohci_process_finalized_td
jmp .tdloop
.tddone:
; 6. Process wait-done notifications, test for new wait requests.
; Note: that must be done after steps 2 and 5 which could create new requests.
; 6a. Call the worker function from main USB code.
invoke usbhc_api.usb_process_wait_lists
; 6b. If no new requests, skip the rest of this step.
test eax, eax
jz @f
; 6c. OHCI is not allowed to cache anything; we don't know what is
; processed right now, but we can be sure that the controller will not
; use any removed structure starting from the next frame.
; Schedule SOF event.
spin_lock_irq [esi+usb_controller.RemoveSpinlock]
mov eax, [esi+usb_controller.WaitPipeListAsync]
mov [esi+usb_controller.WaitPipeRequestAsync], eax
mov eax, [esi+usb_controller.WaitPipeListPeriodic]
mov [esi+usb_controller.WaitPipeRequestPeriodic], eax
; temporarily stop bulk and interrupt processing;
; this is required for handler of SOF event
and dword [edi+OhciControlReg], not 30h
; remember the frame number when processing has been stopped
; (needs to be done after stopping)
movzx eax, [esi+ohci_controller.FrameNumber-sizeof.ohci_controller]
mov [esi+usb_controller.StartWaitFrame], eax
; make sure that the next SOF will happen after the request
mov dword [edi+OhciInterruptStatusReg], 4
; enable interrupt on SOF
; Note: OhciInterruptEnableReg/OhciInterruptDisableReg have unusual semantics,
; so there should be 'mov' here, not 'or'
mov dword [edi+OhciInterruptEnableReg], 4
spin_unlock_irq [esi+usb_controller.RemoveSpinlock]
@@:
; 7. Restore the return value and return.
pop eax
pop edi ebx ; restore used registers to be stdcall
ret
endp
; Helper procedure for ohci_process_deferred. Processes one completed TD.
; in: esi -> usb_controller, ebx -> usb_gtd, out: ebx -> next usb_gtd.
proc ohci_process_finalized_td
; DEBUGF 1,'K : processing %x\n',ebx
; 1. Check whether the pipe has been closed, either due to API call or due to
; disconnect; if so, the callback will be called by usb_pipe_closed with
; correct status, so go to step 6 with ebx = 0 (do not free the TD).
mov edx, [ebx+usb_gtd.Pipe]
test [edx+usb_pipe.Flags], USB_FLAG_CLOSED
jz @f
lea eax, [ebx+ohci_gtd.NextTD-sizeof.ohci_gtd]
xor ebx, ebx
jmp .next_td2
@@:
; 2. Remove the descriptor from the descriptors queue.
invoke usbhc_api.usb_unlink_td
; 3. Get number of bytes that remain to be transferred.
; If CurBufPtr is zero, everything was transferred.
xor edx, edx
cmp [ebx+ohci_gtd.CurBufPtr-sizeof.ohci_gtd], edx
jz .gotlen
; Otherwise, the remaining length is
; (BufEnd and 0xFFF) - (CurBufPtr and 0xFFF) + 1,
; plus 0x1000 if BufEnd and CurBufPtr are in different pages.
mov edx, [ebx+ohci_gtd.BufEnd-sizeof.ohci_gtd]
mov eax, [ebx+ohci_gtd.CurBufPtr-sizeof.ohci_gtd]
mov ecx, edx
and edx, 0xFFF
inc edx
xor ecx, eax
and ecx, -0x1000
jz @f
add edx, 0x1000
@@:
and eax, 0xFFF
sub edx, eax
.gotlen:
; The actual length is Length - (remaining length).
sub edx, [ebx+usb_gtd.Length]
neg edx
; 4. Check for error. If so, go to 7.
push ebx
mov ecx, [ebx+ohci_gtd.Flags-sizeof.ohci_gtd]
shr ecx, 28
jnz .error
.notify:
; 5. Successful completion.
invoke usbhc_api.usb_process_gtd
.next_td:
; 6. Free the current descriptor and advance to the next item.
; If the current item is the last in the list,
; set DoneListEndPtr to pointer to DoneList.
cmp ebx, [esp]
jz @f
stdcall ohci_free_gtd, ebx
@@:
pop ebx
lea eax, [ebx+ohci_gtd.NextTD-sizeof.ohci_gtd]
.next_td2:
push ebx
mov ebx, eax
lea edx, [esi+ohci_controller.DoneList-sizeof.ohci_controller]
xor ecx, ecx ; no next item
lock cmpxchg [esi+ohci_controller.DoneListEndPtr-sizeof.ohci_controller], edx
jz .last
; The current item is not the last.
; It is possible, although very rare, that ohci_irq has already advanced
; DoneListEndPtr, but not yet written NextTD. Wait until NextTD is nonzero.
@@:
mov ecx, [ebx]
test ecx, ecx
jz @b
.last:
pop ebx
; ecx = the next item
push ecx
; Free the current item, set ebx to the next item, continue to 5a.
test ebx, ebx
jz @f
stdcall ohci_free_gtd, ebx
@@:
pop ebx
ret
.error:
; 7. There was an error while processing this descriptor.
; The hardware has stopped processing the queue.
; 7a. Save status and length.
push ecx
push edx
; DEBUGF 1,'K : TD failed:\n'
; DEBUGF 1,'K : %x %x %x %x\n',[ebx-sizeof.ohci_gtd],[ebx-sizeof.ohci_gtd+4],[ebx-sizeof.ohci_gtd+8],[ebx-sizeof.ohci_gtd+12]
; DEBUGF 1,'K : %x %x %x %x\n',[ebx-sizeof.ohci_gtd+16],[ebx-sizeof.ohci_gtd+20],[ebx-sizeof.ohci_gtd+24],[ebx-sizeof.ohci_gtd+28]
; mov eax, [ebx+usb_gtd.Pipe]
; DEBUGF 1,'K : pipe: %x %x %x %x\n',[eax-sizeof.ohci_pipe],[eax-sizeof.ohci_pipe+4],[eax-sizeof.ohci_pipe+8],[eax-sizeof.ohci_pipe+12]
; 7b. Traverse the list of descriptors looking for the final packet
; for this transfer.
; Free and unlink non-final descriptors, except the current one.
; Final descriptor will be freed in step 6.
invoke usbhc_api.usb_is_final_packet
jnc .found_final
mov ebx, [ebx+usb_gtd.NextVirt]
virtual at esp
.length dd ?
.error_code dd ?
.current_item dd ?
end virtual
.look_final:
invoke usbhc_api.usb_unlink_td
invoke usbhc_api.usb_is_final_packet
jnc .found_final
push [ebx+usb_gtd.NextVirt]
stdcall ohci_free_gtd, ebx
pop ebx
jmp .look_final
.found_final:
; 7c. If error code is USB_STATUS_UNDERRUN and the last TD allows short packets,
; it is not an error.
; Note: all TDs except the last one in any transfer stage are marked
; as short-packet-is-error to stop controller from further processing
; of that stage; we need to restart processing from a TD following the last.
; After that, go to step 5 with eax = 0 (no error).
cmp dword [.error_code], USB_STATUS_UNDERRUN
jnz .no_underrun
test byte [ebx+ohci_gtd.Flags+2-sizeof.ohci_gtd], 1 shl (18-16)
jz .no_underrun
and dword [.error_code], 0
mov ecx, [ebx+usb_gtd.Pipe]
mov edx, [ecx+ohci_pipe.HeadP-sizeof.ohci_pipe]
and edx, 2
.advance_queue:
mov eax, [ebx+usb_gtd.NextVirt]
sub eax, sizeof.ohci_gtd
invoke GetPhysAddr
or eax, edx
mov [ecx+ohci_pipe.HeadP-sizeof.ohci_pipe], eax
push ebx
mov ebx, ecx
call ohci_notify_new_work
pop ebx
pop edx ecx
jmp .notify
; 7d. Abort the entire transfer.
; There are two cases: either there is only one transfer stage
; (everything except control transfers), then ebx points to the last TD and
; all previous TD were unlinked and dismissed (if possible),
; or there are several stages (a control transfer) and ebx points to the last
; TD of Data or Status stage (usb_is_final_packet does not stop in Setup stage,
; because Setup stage can not produce short packets); for Data stage, we need
; to unlink and free (if possible) one more TD and advance ebx to the next one.
.no_underrun:
cmp [ebx+usb_gtd.Callback], 0
jnz .halted
cmp ebx, [.current_item]
push [ebx+usb_gtd.NextVirt]
jz @f
stdcall ohci_free_gtd, ebx
@@:
pop ebx
invoke usbhc_api.usb_unlink_td
.halted:
; 7e. For bulk/interrupt transfers we have no choice but halt the queue,
; the driver should intercede (through some API which is not written yet).
; Control pipes normally recover at the next SETUP transaction (first stage
; of any control transfer), so we hope on the best and just advance the queue
; to the next transfer. (According to the standard, "A control pipe may also
; support functional stall as well, but this is not recommended.").
; Advance the transfer queue to the next descriptor.
mov ecx, [ebx+usb_gtd.Pipe]
mov edx, [ecx+ohci_pipe.HeadP-sizeof.ohci_pipe]
and edx, 2 ; keep toggleCarry bit
cmp [ecx+usb_pipe.Type], CONTROL_PIPE
jz @f
inc edx ; set Halted bit
@@:
jmp .advance_queue
endp
; This procedure is called when a pipe is closing (either due to API call
; or due to disconnect); it unlinks the pipe from the corresponding list.
; esi -> usb_controller, ebx -> usb_pipe
proc ohci_unlink_pipe
cmp [ebx+usb_pipe.Type], INTERRUPT_PIPE
jnz @f
mov eax, [ebx+ohci_pipe.Flags-sizeof.ohci_pipe]
bt eax, 13
setc cl
bt eax, 12
setc ch
shr eax, 16
stdcall usb1_interrupt_list_unlink, eax, ecx
@@:
ret
endp
; This procedure temporarily removes the given pipe from hardware queue,
; keeping it in software lists.
; esi -> usb_controller, ebx -> usb_pipe
proc ohci_disable_pipe
mov eax, [ebx+ohci_pipe.NextED-sizeof.ohci_pipe]
mov edx, [ebx+usb_pipe.PrevVirt]
mov [edx+ohci_pipe.NextED-sizeof.ohci_pipe], eax
ret
endp
; This procedure reinserts the given pipe from hardware queue
; after ehci_disable_pipe, with clearing transfer queue.
; esi -> usb_controller, ebx -> usb_pipe
; edx -> current descriptor, eax -> new last descriptor
proc ohci_enable_pipe
sub eax, sizeof.ohci_gtd
invoke GetPhysAddr
mov edx, [ebx+ohci_pipe.HeadP-sizeof.ohci_pipe]
and edx, 2
or eax, edx
mov [ebx+ohci_pipe.HeadP-sizeof.ohci_pipe], eax
lea eax, [ebx-sizeof.ohci_pipe]
invoke GetPhysAddr
mov edx, [ebx+usb_pipe.PrevVirt]
mov ecx, [edx+ohci_pipe.NextED-sizeof.ohci_pipe]
mov [ebx+ohci_pipe.NextED-sizeof.ohci_pipe], ecx
mov [edx+ohci_pipe.NextED-sizeof.ohci_pipe], eax
ret
endp
; Allocates one endpoint structure for OHCI.
; Returns pointer to software part (usb_pipe) in eax.
proc ohci_alloc_pipe
push ebx
mov ebx, ohci_ep_mutex
invoke usbhc_api.usb_allocate_common, (sizeof.ohci_pipe + sizeof.usb_pipe + 0Fh) and not 0Fh
test eax, eax
jz @f
add eax, sizeof.ohci_pipe
@@:
pop ebx
ret
endp
; Free one endpoint structure for OHCI.
; Stdcall with one argument, pointer to software part (usb_pipe).
proc ohci_free_pipe
sub dword [esp+4], sizeof.ohci_pipe
jmp [usbhc_api.usb_free_common]
endp
; Allocates one general transfer descriptor structure for OHCI.
; Returns pointer to software part (usb_gtd) in eax.
proc ohci_alloc_gtd
push ebx
mov ebx, ohci_gtd_mutex
invoke usbhc_api.usb_allocate_common, (sizeof.ohci_gtd + sizeof.usb_gtd + 0Fh) and not 0Fh
test eax, eax
jz @f
add eax, sizeof.ohci_gtd
@@:
pop ebx
ret
endp
; Free one general transfer descriptor structure for OHCI.
; Stdcall with one argument, pointer to software part (usb_gtd).
proc ohci_free_gtd
sub dword [esp+4], sizeof.ohci_gtd
jmp [usbhc_api.usb_free_common]
endp
include 'usb1_scheduler.inc'
define_controller_name ohci
section '.data' readable writable
include '../peimport.inc'
include_debug_strings
IncludeIGlobals
IncludeUGlobals
align 4
usbhc_api usbhc_func
ohci_ep_first_page dd ?
ohci_ep_mutex MUTEX
ohci_gtd_first_page dd ?
ohci_gtd_mutex MUTEX
Reference in New Issue View Git Blame Copy Permalink