mirror of
https://github.com/KolibriOS/kolibrios.git
synced 2024-12-13 18:37:08 +03:00
8423f9ffb6
git-svn-id: svn://kolibrios.org@3908 a494cfbc-eb01-0410-851d-a64ba20cac60
845 lines
33 KiB
HTML
845 lines
33 KiB
HTML
; Functions for USB pipe manipulation: opening/closing, sending data etc.
|
|
;
|
|
; =============================================================================
|
|
; ================================= Constants =================================
|
|
; =============================================================================
|
|
; USB pipe types
|
|
CONTROL_PIPE = 0
|
|
ISOCHRONOUS_PIPE = 1
|
|
BULK_PIPE = 2
|
|
INTERRUPT_PIPE = 3
|
|
|
|
; Status codes for transfer callbacks.
|
|
; Taken from OHCI as most verbose controller in this sense.
|
|
USB_STATUS_OK = 0 ; no error
|
|
USB_STATUS_CRC = 1 ; CRC error
|
|
USB_STATUS_BITSTUFF = 2 ; bit stuffing violation
|
|
USB_STATUS_TOGGLE = 3 ; data toggle mismatch
|
|
USB_STATUS_STALL = 4 ; device returned STALL
|
|
USB_STATUS_NORESPONSE = 5 ; device not responding
|
|
USB_STATUS_PIDCHECK = 6 ; invalid PID check bits
|
|
USB_STATUS_WRONGPID = 7 ; unexpected PID value
|
|
USB_STATUS_OVERRUN = 8 ; too many data from endpoint
|
|
USB_STATUS_UNDERRUN = 9 ; too few data from endpoint
|
|
USB_STATUS_BUFOVERRUN = 12 ; overflow of internal controller buffer
|
|
USB_STATUS_BUFUNDERRUN = 13 ; underflow of internal controller buffer
|
|
USB_STATUS_CLOSED = 16 ; pipe closed
|
|
; either explicitly with USBClosePipe
|
|
; or implicitly due to device disconnect
|
|
|
|
; flags for usb_pipe.Flags
|
|
USB_FLAG_CLOSED = 1 ; pipe is closed, no new transfers
|
|
; pipe is closed, return error instead of submitting any new transfer
|
|
USB_FLAG_CAN_FREE = 2
|
|
; pipe is closed via explicit call to USBClosePipe, so it can be freed without
|
|
; any driver notification; if this flag is not set, then the pipe is closed due
|
|
; to device disconnect, so it must remain valid until return from disconnect
|
|
; callback provided by the driver
|
|
USB_FLAG_EXTRA_WAIT = 4
|
|
; The pipe was in wait list, while another event occured;
|
|
; when the first wait will be done, reinsert the pipe to wait list
|
|
USB_FLAG_CLOSED_BIT = 0 ; USB_FLAG_CLOSED = 1 shl USB_FLAG_CLOSED_BIT
|
|
|
|
; =============================================================================
|
|
; ================================ Structures =================================
|
|
; =============================================================================
|
|
|
|
; Pipe descriptor.
|
|
; * An USB pipe is described by two structures, for hardware and for software.
|
|
; * This is the software part. The hardware part is defined in a driver
|
|
; of the corresponding controller.
|
|
; * The hardware part is located immediately before usb_pipe,
|
|
; both are allocated at once by controller-specific code
|
|
; (it knows the total length, which depends on the hardware part).
|
|
struct usb_pipe
|
|
Controller dd ?
|
|
; Pointer to usb_controller structure corresponding to this pipe.
|
|
; Must be the first dword after hardware part, see *hci_new_device.
|
|
;
|
|
; Every endpoint is included into one of processing lists:
|
|
; * Bulk list contains all Bulk endpoints.
|
|
; * Control list contains all Control endpoints.
|
|
; * Several Periodic lists serve Interrupt endpoints with different interval.
|
|
; - There are N=2^n "leaf" periodic lists for N ms interval, one is processed
|
|
; in the frames 0,N,2N,..., another is processed in the frames
|
|
; 1,1+N,1+2N,... and so on. The hardware starts processing of periodic
|
|
; endpoints in every frame from the list identified by lower n bits of the
|
|
; frame number; the addresses of these N lists are written to the
|
|
; controller data area during the initialization.
|
|
; - We assume that n=5, N=32 to simplify the code and compact the data.
|
|
; OHCI works in this way. UHCI and EHCI actually have n=10, N=1024,
|
|
; but this is an overkill for interrupt endpoints; the large value of N is
|
|
; useful only for isochronous transfers in UHCI and EHCI. UHCI/EHCI code
|
|
; initializes "leaf" lists k,k+32,k+64,...,k+(1024-32) to the same value,
|
|
; giving essentially N=32.
|
|
; This restriction means that the actual maximum interval of polling any
|
|
; interrupt endpoint is 32ms, which seems to be a reasonable value.
|
|
; - Similarly, there are 16 lists for 16-ms interval, 8 lists for 8-ms
|
|
; interval and so on. Finally, there is one list for 1ms interval. Their
|
|
; addresses are not directly known to the controller.
|
|
; - The hardware serves endpoints following a physical link from the hardware
|
|
; part.
|
|
; - The hardware links are organized as follows. If the list item is not the
|
|
; last, it's hardware link points to the next item. The hardware link of
|
|
; the last item points to the first item of the "next" list.
|
|
; - The "next" list for k-th and (k+M)-th periodic lists for interval 2M ms
|
|
; is the k-th periodic list for interval M ms, M >= 1. In this scheme,
|
|
; if two "previous" lists are served in the frames k,k+2M,k+4M,...
|
|
; and k+M,k+3M,k+5M,... correspondingly, the "next" list is served in
|
|
; the frames k,k+M,k+2M,k+3M,k+4M,k+5M,..., which is exactly what we want.
|
|
; - The links between Periodic, Control, Bulk lists and the processing of
|
|
; Isochronous endpoints are controller-specific.
|
|
; * The head of every processing list is a static entry which does not
|
|
; correspond to any real pipe. It is described by usb_static_ep
|
|
; structure, not usb_pipe. For OHCI and UHCI, sizeof.usb_static_ep plus
|
|
; sizeof hardware part is 20h, the total number of lists is
|
|
; 32+16+8+4+2+1+1+1 = 65, so all these structures fit in one page,
|
|
; leaving space for other data. This is another reason for 32ms limit.
|
|
; * Static endpoint descriptors are kept in *hci_controller structure.
|
|
; * All items in every processing list, including the static head, are
|
|
; organized in a double-linked list using .NextVirt and .PrevVirt fields.
|
|
; * [[item.NextVirt].PrevVirt] = [[item.PrevVirt].NextVirt] for all items.
|
|
NextVirt dd ?
|
|
; Next endpoint in the processing list.
|
|
; See also PrevVirt field and the description before NextVirt field.
|
|
PrevVirt dd ?
|
|
; Previous endpoint in the processing list.
|
|
; See also NextVirt field and the description before NextVirt field.
|
|
;
|
|
; Every pipe has the associated transfer queue, that is, the double-linked
|
|
; list of Transfer Descriptors aka TD. For Control, Bulk and Interrupt
|
|
; endpoints this list consists of usb_gtd structures
|
|
; (GTD = General Transfer Descriptors), for Isochronous endpoints
|
|
; this list consists of usb_itd structures, which are not developed yet.
|
|
; The pipe needs to know only the last TD; the first TD can be
|
|
; obtained as [[pipe.LastTD].NextVirt].
|
|
LastTD dd ?
|
|
; Last TD in the transfer queue.
|
|
;
|
|
; All opened pipes corresponding to the same physical device are organized in
|
|
; the double-linked list using .NextSibling and .PrevSibling fields.
|
|
; The head of this list is kept in usb_device_data structure (OpenedPipeList).
|
|
; This list is used when the device is disconnected and all pipes for the
|
|
; device should be closed.
|
|
; Also, all pipes closed due to disconnect must remain valid at least until
|
|
; driver-provided disconnect function returns; all should-be-freed-but-not-now
|
|
; pipes for one device are organized in another double-linked list with
|
|
; the head in usb_device_data.ClosedPipeList; this list uses the same link
|
|
; fields, one pipe can never be in both lists.
|
|
NextSibling dd ?
|
|
; Next pipe for the physical device.
|
|
PrevSibling dd ?
|
|
; Previous pipe for the physical device.
|
|
;
|
|
; When hardware part of pipe is changed, some time is needed before further
|
|
; actions so that hardware reacts on this change. During that time,
|
|
; all changed pipes are organized in single-linked list with the head
|
|
; usb_controller.WaitPipeList* and link field NextWait.
|
|
; Currently there are two possible reasons to change:
|
|
; change of address/packet size in initial configuration,
|
|
; close of the pipe. They are distinguished by USB_FLAG_CLOSED.
|
|
NextWait dd ?
|
|
Lock MUTEX
|
|
; Mutex that guards operations with transfer queue for this pipe.
|
|
Type db ?
|
|
; Type of pipe, one of {CONTROL,ISOCHRONOUS,BULK,INTERRUPT}_PIPE.
|
|
Flags db ?
|
|
; Combination of flags, USB_FLAG_*.
|
|
rb 2 ; dword alignment
|
|
DeviceData dd ?
|
|
; Pointer to usb_device_data, common for all pipes for one device.
|
|
ends
|
|
|
|
; This structure describes the static head of every list of pipes.
|
|
struct usb_static_ep
|
|
; software fields
|
|
Bandwidth dd ?
|
|
; valid only for interrupt/isochronous USB1 lists
|
|
; The offsets of the following two fields must be the same in this structure
|
|
; and in usb_pipe.
|
|
NextVirt dd ?
|
|
PrevVirt dd ?
|
|
ends
|
|
|
|
; This structure represents one transfer descriptor
|
|
; ('g' stands for "general" as opposed to isochronous usb_itd).
|
|
; Note that one transfer can have several descriptors:
|
|
; a control transfer has three stages.
|
|
; Additionally, every controller has a limit on transfer length with
|
|
; one descriptor (packet size for UHCI, 1K for OHCI, 4K for EHCI),
|
|
; large transfers must be split into individual packets according to that limit.
|
|
struct usb_gtd
|
|
Callback dd ?
|
|
; Zero for intermediate descriptors, pointer to callback function
|
|
; for final descriptor. See the docs for description of the callback.
|
|
UserData dd ?
|
|
; Dword which is passed to Callback as is, not used by USB code itself.
|
|
; Two following fields organize all descriptors for one pipe in
|
|
; the linked list.
|
|
NextVirt dd ?
|
|
PrevVirt dd ?
|
|
Pipe dd ?
|
|
; Pointer to the parent usb_pipe.
|
|
Buffer dd ?
|
|
; Pointer to data for this descriptor.
|
|
Length dd ?
|
|
; Length of data for this descriptor.
|
|
ends
|
|
|
|
; =============================================================================
|
|
; =================================== Code ====================================
|
|
; =============================================================================
|
|
|
|
USB_STDCALL_VERIFY = 1
|
|
macro stdcall_verify [arg]
|
|
{
|
|
common
|
|
if USB_STDCALL_VERIFY
|
|
pushad
|
|
stdcall arg
|
|
call verify_regs
|
|
popad
|
|
else
|
|
stdcall arg
|
|
end if
|
|
}
|
|
|
|
; Initialization of usb_static_ep structure,
|
|
; called from controller-specific initialization; edi -> usb_static_ep
|
|
proc usb_init_static_endpoint
|
|
mov [edi+usb_static_ep.NextVirt], edi
|
|
mov [edi+usb_static_ep.PrevVirt], edi
|
|
ret
|
|
endp
|
|
|
|
; Part of API for drivers, see documentation for USBOpenPipe.
|
|
proc usb_open_pipe stdcall uses ebx esi edi,\
|
|
config_pipe:dword, endpoint:dword, maxpacket:dword, type:dword, interval:dword
|
|
locals
|
|
tt_vars rd (ehci_select_tt_interrupt_list.local_vars_size + 3) / 4
|
|
targetsmask dd ? ; S-Mask for USB2
|
|
bandwidth dd ?
|
|
target dd ?
|
|
endl
|
|
; 1. Verify type of pipe: it must be one of *_PIPE constants.
|
|
; Isochronous pipes are not supported yet.
|
|
mov eax, [type]
|
|
cmp eax, INTERRUPT_PIPE
|
|
ja .badtype
|
|
cmp al, ISOCHRONOUS_PIPE
|
|
jnz .goodtype
|
|
.badtype:
|
|
dbgstr 'unsupported type of USB pipe'
|
|
jmp .return0
|
|
.goodtype:
|
|
; 2. Allocate memory for pipe and transfer queue.
|
|
; Empty transfer queue consists of one inactive TD.
|
|
mov ebx, [config_pipe]
|
|
mov esi, [ebx+usb_pipe.Controller]
|
|
mov edx, [esi+usb_controller.HardwareFunc]
|
|
call [edx+usb_hardware_func.AllocPipe]
|
|
test eax, eax
|
|
jz .nothing
|
|
mov edi, eax
|
|
mov edx, [esi+usb_controller.HardwareFunc]
|
|
call [edx+usb_hardware_func.AllocTD]
|
|
test eax, eax
|
|
jz .free_and_return0
|
|
; 3. Initialize transfer queue: pointer to transfer descriptor,
|
|
; pointers in transfer descriptor, queue lock.
|
|
mov [edi+usb_pipe.LastTD], eax
|
|
mov [eax+usb_gtd.NextVirt], eax
|
|
mov [eax+usb_gtd.PrevVirt], eax
|
|
mov [eax+usb_gtd.Pipe], edi
|
|
lea ecx, [edi+usb_pipe.Lock]
|
|
call mutex_init
|
|
; 4. Initialize software part of pipe structure, except device-related fields.
|
|
mov al, byte [type]
|
|
mov [edi+usb_pipe.Type], al
|
|
xor eax, eax
|
|
mov [edi+usb_pipe.Flags], al
|
|
mov [edi+usb_pipe.DeviceData], eax
|
|
mov [edi+usb_pipe.Controller], esi
|
|
or [edi+usb_pipe.NextWait], -1
|
|
; 5. Initialize device-related fields:
|
|
; for zero endpoint, set .NextSibling = .PrevSibling = this;
|
|
; for other endpoins, copy device data, take the lock guarding pipe list
|
|
; for the device and verify that disconnect processing has not yet started
|
|
; for the device. (Since disconnect processing also takes that lock,
|
|
; either it has completed or it will not start until we release the lock.)
|
|
; Note: usb_device_disconnected should not see the new pipe until
|
|
; initialization is complete, so that lock will be held during next steps
|
|
; (disconnect processing should either not see it at all, or see fully
|
|
; initialized pipe).
|
|
cmp [endpoint], eax
|
|
jz .zero_endpoint
|
|
mov ecx, [ebx+usb_pipe.DeviceData]
|
|
mov [edi+usb_pipe.DeviceData], ecx
|
|
call mutex_lock
|
|
test [ebx+usb_pipe.Flags], USB_FLAG_CLOSED
|
|
jz .common
|
|
.fail:
|
|
; If disconnect processing has completed, unlock the mutex, free memory
|
|
; allocated in step 2 and return zero.
|
|
call mutex_unlock
|
|
mov edx, [esi+usb_controller.HardwareFunc]
|
|
stdcall [edx+usb_hardware_func.FreeTD], [edi+usb_pipe.LastTD]
|
|
.free_and_return0:
|
|
mov edx, [esi+usb_controller.HardwareFunc]
|
|
stdcall [edx+usb_hardware_func.FreePipe], edi
|
|
.return0:
|
|
xor eax, eax
|
|
jmp .nothing
|
|
.zero_endpoint:
|
|
mov [edi+usb_pipe.NextSibling], edi
|
|
mov [edi+usb_pipe.PrevSibling], edi
|
|
.common:
|
|
; 6. Initialize hardware part of pipe structure.
|
|
; 6a. Acquire the corresponding mutex.
|
|
lea ecx, [esi+usb_controller.ControlLock]
|
|
cmp [type], BULK_PIPE
|
|
jb @f ; control pipe
|
|
lea ecx, [esi+usb_controller.BulkLock]
|
|
jz @f ; bulk pipe
|
|
lea ecx, [esi+usb_controller.PeriodicLock]
|
|
@@:
|
|
call mutex_lock
|
|
; 6b. Let the controller-specific code do its job.
|
|
push ecx
|
|
mov edx, [esi+usb_controller.HardwareFunc]
|
|
mov eax, [edi+usb_pipe.LastTD]
|
|
mov ecx, [config_pipe]
|
|
call [edx+usb_hardware_func.InitPipe]
|
|
pop ecx
|
|
; 6c. Release the mutex.
|
|
push eax
|
|
call mutex_unlock
|
|
pop eax
|
|
; 6d. If controller-specific code indicates failure,
|
|
; release the lock taken in step 5, free memory allocated in step 2
|
|
; and return zero.
|
|
test eax, eax
|
|
jz .fail
|
|
; 7. The pipe is initialized. If this is not the first pipe for the device,
|
|
; insert it to the tail of pipe list for the device,
|
|
; increment number of pipes,
|
|
; release the lock taken at step 5.
|
|
mov ecx, [edi+usb_pipe.DeviceData]
|
|
test ecx, ecx
|
|
jz @f
|
|
mov eax, [ebx+usb_pipe.PrevSibling]
|
|
mov [edi+usb_pipe.NextSibling], ebx
|
|
mov [edi+usb_pipe.PrevSibling], eax
|
|
mov [ebx+usb_pipe.PrevSibling], edi
|
|
mov [eax+usb_pipe.NextSibling], edi
|
|
inc [ecx+usb_device_data.NumPipes]
|
|
call mutex_unlock
|
|
@@:
|
|
; 8. Return pointer to usb_pipe.
|
|
mov eax, edi
|
|
.nothing:
|
|
ret
|
|
endp
|
|
|
|
; This procedure is called several times during initial device configuration,
|
|
; when usb_device_data structure is reallocated.
|
|
; It (re)initializes all pointers in usb_device_data.
|
|
; ebx -> usb_pipe
|
|
proc usb_reinit_pipe_list
|
|
push eax
|
|
; 1. (Re)initialize the lock guarding pipe list.
|
|
mov ecx, [ebx+usb_pipe.DeviceData]
|
|
call mutex_init
|
|
; 2. Initialize list of opened pipes: two entries, the head and ebx.
|
|
add ecx, usb_device_data.OpenedPipeList - usb_pipe.NextSibling
|
|
mov [ecx+usb_pipe.NextSibling], ebx
|
|
mov [ecx+usb_pipe.PrevSibling], ebx
|
|
mov [ebx+usb_pipe.NextSibling], ecx
|
|
mov [ebx+usb_pipe.PrevSibling], ecx
|
|
; 3. Initialize list of closed pipes: empty list, only the head is present.
|
|
add ecx, usb_device_data.ClosedPipeList - usb_device_data.OpenedPipeList
|
|
mov [ecx+usb_pipe.NextSibling], ecx
|
|
mov [ecx+usb_pipe.PrevSibling], ecx
|
|
pop eax
|
|
ret
|
|
endp
|
|
|
|
; Part of API for drivers, see documentation for USBClosePipe.
|
|
proc usb_close_pipe
|
|
push ebx esi ; save used registers to be stdcall
|
|
virtual at esp
|
|
rd 2 ; saved registers
|
|
dd ? ; return address
|
|
.pipe dd ?
|
|
end virtual
|
|
; 1. Lock the pipe list for the device.
|
|
mov ebx, [.pipe]
|
|
mov esi, [ebx+usb_pipe.Controller]
|
|
mov ecx, [ebx+usb_pipe.DeviceData]
|
|
call mutex_lock
|
|
; 2. Set the flag "the driver has abandoned this pipe, free it at any time".
|
|
lea ecx, [ebx+usb_pipe.Lock]
|
|
call mutex_lock
|
|
or [ebx+usb_pipe.Flags], USB_FLAG_CAN_FREE
|
|
call mutex_unlock
|
|
; 3. Call the worker function.
|
|
call usb_close_pipe_nolock
|
|
; 4. Unlock the pipe list for the device.
|
|
mov ecx, [ebx+usb_pipe.DeviceData]
|
|
call mutex_unlock
|
|
; 5. Wakeup the USB thread so that it can proceed with releasing that pipe.
|
|
push edi
|
|
call usb_wakeup
|
|
pop edi
|
|
; 6. Return.
|
|
pop esi ebx ; restore used registers to be stdcall
|
|
retn 4
|
|
endp
|
|
|
|
; Worker function for pipe closing. Called by usb_close_pipe API and
|
|
; from disconnect processing.
|
|
; The lock guarding pipe list for the device should be held by the caller.
|
|
; ebx -> usb_pipe, esi -> usb_controller
|
|
proc usb_close_pipe_nolock
|
|
; 1. Set the flag "pipe is closed, ignore new transfers".
|
|
; If it was already set, do nothing.
|
|
lea ecx, [ebx+usb_pipe.Lock]
|
|
call mutex_lock
|
|
bts dword [ebx+usb_pipe.Flags], USB_FLAG_CLOSED_BIT
|
|
jc .closed
|
|
call mutex_unlock
|
|
; 2. Remove the pipe from the list of opened pipes.
|
|
mov eax, [ebx+usb_pipe.NextSibling]
|
|
mov edx, [ebx+usb_pipe.PrevSibling]
|
|
mov [eax+usb_pipe.PrevSibling], edx
|
|
mov [edx+usb_pipe.NextSibling], eax
|
|
; 3. Unlink the pipe from hardware structures.
|
|
; 3a. Acquire the corresponding lock.
|
|
lea edx, [esi+usb_controller.WaitPipeListAsync]
|
|
lea ecx, [esi+usb_controller.ControlLock]
|
|
cmp [ebx+usb_pipe.Type], BULK_PIPE
|
|
jb @f ; control pipe
|
|
lea ecx, [esi+usb_controller.BulkLock]
|
|
jz @f ; bulk pipe
|
|
add edx, usb_controller.WaitPipeListPeriodic - usb_controller.WaitPipeListAsync
|
|
lea ecx, [esi+usb_controller.PeriodicLock]
|
|
@@:
|
|
push edx
|
|
call mutex_lock
|
|
push ecx
|
|
; 3b. Let the controller-specific code do its job.
|
|
mov eax, [esi+usb_controller.HardwareFunc]
|
|
call [eax+usb_hardware_func.UnlinkPipe]
|
|
; 3c. Release the corresponding lock.
|
|
pop ecx
|
|
call mutex_unlock
|
|
; 4. Put the pipe into wait queue.
|
|
pop edx
|
|
cmp [ebx+usb_pipe.NextWait], -1
|
|
jz .insert_new
|
|
or [ebx+usb_pipe.Flags], USB_FLAG_EXTRA_WAIT
|
|
jmp .inserted
|
|
.insert_new:
|
|
mov eax, [edx]
|
|
mov [ebx+usb_pipe.NextWait], eax
|
|
mov [edx], ebx
|
|
.inserted:
|
|
; 5. Return.
|
|
ret
|
|
.closed:
|
|
call mutex_unlock
|
|
xor eax, eax
|
|
ret
|
|
endp
|
|
|
|
; This procedure is called when a pipe with USB_FLAG_CLOSED is removed from the
|
|
; corresponding wait list. It means that the hardware has fully forgot about it.
|
|
; ebx -> usb_pipe, esi -> usb_controller
|
|
proc usb_pipe_closed
|
|
push edi
|
|
mov edi, [esi+usb_controller.HardwareFunc]
|
|
; 1. Loop over all transfers, calling the driver with USB_STATUS_CLOSED
|
|
; and freeing all descriptors.
|
|
mov edx, [ebx+usb_pipe.LastTD]
|
|
test edx, edx
|
|
jz .no_transfer
|
|
mov edx, [edx+usb_gtd.NextVirt]
|
|
.transfer_loop:
|
|
cmp edx, [ebx+usb_pipe.LastTD]
|
|
jz .transfer_done
|
|
mov ecx, [edx+usb_gtd.Callback]
|
|
test ecx, ecx
|
|
jz .no_callback
|
|
push edx
|
|
stdcall_verify ecx, ebx, USB_STATUS_CLOSED, \
|
|
[edx+usb_gtd.Buffer], 0, [edx+usb_gtd.UserData]
|
|
pop edx
|
|
.no_callback:
|
|
push [edx+usb_gtd.NextVirt]
|
|
stdcall [edi+usb_hardware_func.FreeTD], edx
|
|
pop edx
|
|
jmp .transfer_loop
|
|
.transfer_done:
|
|
stdcall [edi+usb_hardware_func.FreeTD], edx
|
|
.no_transfer:
|
|
; 2. Decrement number of pipes for the device.
|
|
; If this pipe is the last pipe, go to 5.
|
|
mov ecx, [ebx+usb_pipe.DeviceData]
|
|
call mutex_lock
|
|
dec [ecx+usb_device_data.NumPipes]
|
|
jz .last_pipe
|
|
call mutex_unlock
|
|
; 3. If the flag "the driver has abandoned this pipe" is set,
|
|
; free memory and return.
|
|
test [ebx+usb_pipe.Flags], USB_FLAG_CAN_FREE
|
|
jz .nofree
|
|
stdcall [edi+usb_hardware_func.FreePipe], ebx
|
|
pop edi
|
|
ret
|
|
; 4. Otherwise, add it to the list of closed pipes and return.
|
|
.nofree:
|
|
add ecx, usb_device_data.ClosedPipeList - usb_pipe.NextSibling
|
|
mov edx, [ecx+usb_pipe.PrevSibling]
|
|
mov [ebx+usb_pipe.NextSibling], ecx
|
|
mov [ebx+usb_pipe.PrevSibling], edx
|
|
mov [ecx+usb_pipe.PrevSibling], ebx
|
|
mov [edx+usb_pipe.NextSibling], ebx
|
|
pop edi
|
|
ret
|
|
.last_pipe:
|
|
; That was the last pipe for the device.
|
|
; 5. Notify device driver(s) about disconnect.
|
|
call mutex_unlock
|
|
mov eax, [ecx+usb_device_data.NumInterfaces]
|
|
test eax, eax
|
|
jz .notify_done
|
|
add ecx, [ecx+usb_device_data.Interfaces]
|
|
.notify_loop:
|
|
mov edx, [ecx+usb_interface_data.DriverFunc]
|
|
test edx, edx
|
|
jz @f
|
|
mov edx, [edx+USBSRV.usb_func]
|
|
cmp [edx+USBFUNC.strucsize], USBFUNC.device_disconnect + 4
|
|
jb @f
|
|
mov edx, [edx+USBFUNC.device_disconnect]
|
|
test edx, edx
|
|
jz @f
|
|
push eax ecx
|
|
stdcall_verify edx, [ecx+usb_interface_data.DriverData]
|
|
pop ecx eax
|
|
@@:
|
|
add ecx, sizeof.usb_interface_data
|
|
dec eax
|
|
jnz .notify_loop
|
|
.notify_done:
|
|
; 6. Bus address, if assigned, can now be reused.
|
|
call [edi+usb_hardware_func.GetDeviceAddress]
|
|
test eax, eax
|
|
jz @f
|
|
bts [esi+usb_controller.ExistingAddresses], eax
|
|
@@:
|
|
dbgstr 'USB device disconnected'
|
|
; 7. All drivers have returned from disconnect callback,
|
|
; so all drivers should not use any device-related pipes.
|
|
; Free the remaining pipes.
|
|
mov eax, [ebx+usb_pipe.DeviceData]
|
|
add eax, usb_device_data.ClosedPipeList - usb_pipe.NextSibling
|
|
push eax
|
|
mov eax, [eax+usb_pipe.NextSibling]
|
|
.free_loop:
|
|
cmp eax, [esp]
|
|
jz .free_done
|
|
push [eax+usb_pipe.NextSibling]
|
|
stdcall [edi+usb_hardware_func.FreePipe], eax
|
|
pop eax
|
|
jmp .free_loop
|
|
.free_done:
|
|
stdcall [edi+usb_hardware_func.FreePipe], ebx
|
|
pop eax
|
|
; 8. Free the usb_device_data structure.
|
|
sub eax, usb_device_data.ClosedPipeList - usb_pipe.NextSibling
|
|
call free
|
|
; 9. Return.
|
|
.nothing:
|
|
pop edi
|
|
ret
|
|
endp
|
|
|
|
; Part of API for drivers, see documentation for USBNormalTransferAsync.
|
|
proc usb_normal_transfer_async stdcall uses ebx edi,\
|
|
pipe:dword, buffer:dword, size:dword, callback:dword, calldata:dword, flags:dword
|
|
; 1. Sanity check: callback must be nonzero.
|
|
; (It is important for other parts of code.)
|
|
xor eax, eax
|
|
cmp [callback], eax
|
|
jz .nothing
|
|
; 2. Lock the transfer queue.
|
|
mov ebx, [pipe]
|
|
lea ecx, [ebx+usb_pipe.Lock]
|
|
call mutex_lock
|
|
; 3. If the pipe has already been closed (presumably due to device disconnect),
|
|
; release the lock taken in step 2 and return zero.
|
|
xor eax, eax
|
|
test [ebx+usb_pipe.Flags], USB_FLAG_CLOSED
|
|
jnz .unlock
|
|
; 4. Allocate and initialize TDs for the transfer.
|
|
mov edx, [ebx+usb_pipe.Controller]
|
|
mov edi, [edx+usb_controller.HardwareFunc]
|
|
stdcall [edi+usb_hardware_func.AllocTransfer], [buffer], [size], [flags], [ebx+usb_pipe.LastTD], 0
|
|
; If failed, release the lock taken in step 2 and return zero.
|
|
test eax, eax
|
|
jz .unlock
|
|
; 5. Store callback and its parameters in the last descriptor for this transfer.
|
|
mov ecx, [eax+usb_gtd.PrevVirt]
|
|
mov edx, [callback]
|
|
mov [ecx+usb_gtd.Callback], edx
|
|
mov edx, [calldata]
|
|
mov [ecx+usb_gtd.UserData], edx
|
|
mov edx, [buffer]
|
|
mov [ecx+usb_gtd.Buffer], edx
|
|
; 6. Advance LastTD pointer and activate transfer.
|
|
push [ebx+usb_pipe.LastTD]
|
|
mov [ebx+usb_pipe.LastTD], eax
|
|
call [edi+usb_hardware_func.InsertTransfer]
|
|
pop eax
|
|
; 7. Release the lock taken in step 2 and
|
|
; return pointer to the first descriptor for the new transfer.
|
|
.unlock:
|
|
push eax
|
|
lea ecx, [ebx+usb_pipe.Lock]
|
|
call mutex_unlock
|
|
pop eax
|
|
.nothing:
|
|
ret
|
|
endp
|
|
|
|
; Part of API for drivers, see documentation for USBControlTransferAsync.
|
|
proc usb_control_async stdcall uses ebx edi,\
|
|
pipe:dword, config:dword, buffer:dword, size:dword, callback:dword, calldata:dword, flags:dword
|
|
locals
|
|
last_td dd ?
|
|
endl
|
|
; 1. Sanity check: callback must be nonzero.
|
|
; (It is important for other parts of code.)
|
|
cmp [callback], 0
|
|
jz .return0
|
|
; 2. Lock the transfer queue.
|
|
mov ebx, [pipe]
|
|
lea ecx, [ebx+usb_pipe.Lock]
|
|
call mutex_lock
|
|
; 3. If the pipe has already been closed (presumably due to device disconnect),
|
|
; release the lock taken in step 2 and return zero.
|
|
test [ebx+usb_pipe.Flags], USB_FLAG_CLOSED
|
|
jnz .unlock_return0
|
|
; A control transfer contains two or three stages:
|
|
; Setup stage, optional Data stage, Status stage.
|
|
; 4. Allocate and initialize TDs for the Setup stage.
|
|
; Payload is 8 bytes from [config].
|
|
mov edx, [ebx+usb_pipe.Controller]
|
|
mov edi, [edx+usb_controller.HardwareFunc]
|
|
stdcall [edi+usb_hardware_func.AllocTransfer], [config], 8, 0, [ebx+usb_pipe.LastTD], (2 shl 2) + 0
|
|
; short transfer is an error, direction is DATA0, token is SETUP
|
|
mov [last_td], eax
|
|
test eax, eax
|
|
jz .fail
|
|
; 5. Allocate and initialize TDs for the Data stage, if [size] is nonzero.
|
|
; Payload is [size] bytes from [buffer].
|
|
mov edx, [config]
|
|
mov ecx, (3 shl 2) + 1 ; DATA1, token is OUT
|
|
cmp byte [edx], 0
|
|
jns @f
|
|
cmp [size], 0
|
|
jz @f
|
|
inc ecx ; token is IN
|
|
@@:
|
|
cmp [size], 0
|
|
jz .nodata
|
|
push ecx
|
|
stdcall [edi+usb_hardware_func.AllocTransfer], [buffer], [size], [flags], eax, ecx
|
|
pop ecx
|
|
test eax, eax
|
|
jz .fail
|
|
mov [last_td], eax
|
|
.nodata:
|
|
; 6. Allocate and initialize TDs for the Status stage.
|
|
; No payload.
|
|
xor ecx, 3 ; IN becomes OUT, OUT becomes IN
|
|
stdcall [edi+usb_hardware_func.AllocTransfer], 0, 0, 0, eax, ecx
|
|
test eax, eax
|
|
jz .fail
|
|
; 7. Store callback and its parameters in the last descriptor for this transfer.
|
|
mov ecx, [eax+usb_gtd.PrevVirt]
|
|
mov edx, [callback]
|
|
mov [ecx+usb_gtd.Callback], edx
|
|
mov edx, [calldata]
|
|
mov [ecx+usb_gtd.UserData], edx
|
|
mov edx, [buffer]
|
|
mov [ecx+usb_gtd.Buffer], edx
|
|
; 8. Advance LastTD pointer and activate transfer.
|
|
push [ebx+usb_pipe.LastTD]
|
|
mov [ebx+usb_pipe.LastTD], eax
|
|
call [edi+usb_hardware_func.InsertTransfer]
|
|
; 9. Release the lock taken in step 2 and
|
|
; return pointer to the first descriptor for the new transfer.
|
|
lea ecx, [ebx+usb_pipe.Lock]
|
|
call mutex_unlock
|
|
pop eax
|
|
ret
|
|
.fail:
|
|
mov eax, [last_td]
|
|
test eax, eax
|
|
jz .unlock_return0
|
|
stdcall usb_undo_tds, [ebx+usb_pipe.LastTD]
|
|
.unlock_return0:
|
|
lea ecx, [ebx+usb_pipe.Lock]
|
|
call mutex_unlock
|
|
.return0:
|
|
xor eax, eax
|
|
ret
|
|
endp
|
|
|
|
; Part of API for drivers, see documentation for USBGetParam.
|
|
proc usb_get_param
|
|
virtual at esp
|
|
dd ? ; return address
|
|
.pipe dd ?
|
|
.param dd ?
|
|
end virtual
|
|
mov edx, [.param]
|
|
mov ecx, [.pipe]
|
|
mov eax, [ecx+usb_pipe.DeviceData]
|
|
test edx, edx
|
|
jz .get_device_descriptor
|
|
dec edx
|
|
jz .get_config_descriptor
|
|
dec edx
|
|
jz .get_speed
|
|
or eax, -1
|
|
ret 8
|
|
.get_device_descriptor:
|
|
add eax, usb_device_data.DeviceDescriptor
|
|
ret 8
|
|
.get_config_descriptor:
|
|
movzx ecx, [eax+usb_device_data.DeviceDescrSize]
|
|
lea eax, [eax+ecx+usb_device_data.DeviceDescriptor]
|
|
ret 8
|
|
.get_speed:
|
|
movzx eax, [eax+usb_device_data.Speed]
|
|
ret 8
|
|
endp
|
|
|
|
; Initialize software part of usb_gtd. Called from controller-specific code
|
|
; somewhere in AllocTransfer with eax -> next (inactive) usb_gtd,
|
|
; ebx -> usb_pipe, ebp frame from call to AllocTransfer with [.td] ->
|
|
; current (initializing) usb_gtd.
|
|
; Returns ecx = [.td].
|
|
proc usb_init_transfer
|
|
virtual at ebp-4
|
|
.Size dd ?
|
|
rd 2
|
|
.Buffer dd ?
|
|
dd ?
|
|
.Flags dd ?
|
|
.td dd ?
|
|
end virtual
|
|
mov [eax+usb_gtd.Pipe], ebx
|
|
mov ecx, [.td]
|
|
mov [eax+usb_gtd.PrevVirt], ecx
|
|
mov edx, [ecx+usb_gtd.NextVirt]
|
|
mov [ecx+usb_gtd.NextVirt], eax
|
|
mov [eax+usb_gtd.NextVirt], edx
|
|
mov [edx+usb_gtd.PrevVirt], eax
|
|
mov edx, [.Size]
|
|
mov [ecx+usb_gtd.Length], edx
|
|
xor edx, edx
|
|
mov [ecx+usb_gtd.Callback], edx
|
|
mov [ecx+usb_gtd.UserData], edx
|
|
ret
|
|
endp
|
|
|
|
; Free all TDs for the current transfer if something has failed
|
|
; during initialization (e.g. no memory for the next TD).
|
|
; Stdcall with one stack argument = first TD for the transfer
|
|
; and eax = last initialized TD for the transfer.
|
|
proc usb_undo_tds
|
|
push [eax+usb_gtd.NextVirt]
|
|
@@:
|
|
cmp eax, [esp+8]
|
|
jz @f
|
|
push [eax+usb_gtd.PrevVirt]
|
|
stdcall [edi+usb_hardware_func.FreeTD], eax
|
|
pop eax
|
|
jmp @b
|
|
@@:
|
|
pop ecx
|
|
mov [eax+usb_gtd.NextVirt], ecx
|
|
mov [ecx+usb_gtd.PrevVirt], eax
|
|
ret 4
|
|
endp
|
|
|
|
; Helper procedure for handling short packets in controller-specific code.
|
|
; Returns with CF cleared if this is the final packet in some stage:
|
|
; for control transfers that means one of Data and Status stages,
|
|
; for other transfers - the final packet in the only stage.
|
|
proc usb_is_final_packet
|
|
cmp [ebx+usb_gtd.Callback], 0
|
|
jnz .nothing
|
|
mov eax, [ebx+usb_gtd.NextVirt]
|
|
cmp [eax+usb_gtd.Callback], 0
|
|
jz .stc
|
|
mov eax, [ebx+usb_gtd.Pipe]
|
|
cmp [eax+usb_pipe.Type], CONTROL_PIPE
|
|
jz .nothing
|
|
.stc:
|
|
stc
|
|
.nothing:
|
|
ret
|
|
endp
|
|
|
|
; Helper procedure for controller-specific code:
|
|
; removes one TD from the transfer queue, ebx -> usb_gtd to remove.
|
|
proc usb_unlink_td
|
|
mov ecx, [ebx+usb_gtd.Pipe]
|
|
add ecx, usb_pipe.Lock
|
|
call mutex_lock
|
|
mov eax, [ebx+usb_gtd.PrevVirt]
|
|
mov edx, [ebx+usb_gtd.NextVirt]
|
|
mov [edx+usb_gtd.PrevVirt], eax
|
|
mov [eax+usb_gtd.NextVirt], edx
|
|
call mutex_unlock
|
|
ret
|
|
endp
|
|
|
|
if USB_STDCALL_VERIFY
|
|
proc verify_regs
|
|
virtual at esp
|
|
dd ? ; return address
|
|
.edi dd ?
|
|
.esi dd ?
|
|
.ebp dd ?
|
|
.esp dd ?
|
|
.ebx dd ?
|
|
.edx dd ?
|
|
.ecx dd ?
|
|
.eax dd ?
|
|
end virtual
|
|
cmp ebx, [.ebx]
|
|
jz @f
|
|
dbgstr 'ERROR!!! ebx changed'
|
|
@@:
|
|
cmp esi, [.esi]
|
|
jz @f
|
|
dbgstr 'ERROR!!! esi changed'
|
|
@@:
|
|
cmp edi, [.edi]
|
|
jz @f
|
|
dbgstr 'ERROR!!! edi changed'
|
|
@@:
|
|
cmp ebp, [.ebp]
|
|
jz @f
|
|
dbgstr 'ERROR!!! ebp changed'
|
|
@@:
|
|
ret
|
|
endp
|
|
end if
|