Aren/kolibrios
1
0
Fork 0
mirror of https://github.com/KolibriOS/kolibrios.git synced 2024-12-25 16:16:50 +03:00
Code Issues Packages Projects Releases Wiki Activity
71069b706f
kolibrios/drivers/ethernet/dec21x4x.asm
hidnplayr 0ba1fff7a7 New network buffers - phase I 
git-svn-id: svn://kolibrios.org@5522 a494cfbc-eb01-0410-851d-a64ba20cac60
2015-03-17 21:50:29 +00:00

1842 lines
57 KiB
NASM
Raw Blame History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2015. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; DEC 21x4x driver for KolibriOS ;;
;; ;;
;; Based on dec21140.Asm from Solar OS by ;;
;; Eugen Brasoveanu, ;;
;; Ontanu Bogdan Valentin ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
format PE DLL native
entry START
CURRENT_API = 0x0200
COMPATIBLE_API = 0x0100
API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API
MAX_DEVICES = 16
TX_RING_SIZE = 4
RX_RING_SIZE = 4
__DEBUG__ = 1
__DEBUG_LEVEL__ = 2 ; 1 = verbose, 2 = errors only
section '.flat' readable writable executable
include '../proc32.inc'
include '../struct.inc'
include '../macros.inc'
include '../fdo.inc'
include '../netdrv.inc'
; Capability flags used in chiplist
FLAG_HAS_MII = 1 shl 0
FLAG_HAS_MEDIA_TABLE = 1 shl 1
FLAG_CSR12_IN_SROM = 1 shl 2
FLAG_ALWAYS_CHECK_MII = 1 shl 3
FLAG_HAS_ACPI = 1 shl 4
; Chip id's
DC21040 = 0
DC21041 = 1
DC21140 = 2
DC21142 = 3
DC21143 = 3
LC82C168 = 4
MX98713 = 5
MX98715 = 6
MX98725 = 7
;-------------------------------------------
; configuration registers
;-------------------------------------------
CFCS = 4 ; configuration and status register
CSR0 = 0x00 ; Bus mode
CSR1 = 0x08 ; Transmit Poll Command
CSR2 = 0x10 ; Receive Poll Command
CSR3 = 0x18 ; Receive list base address
CSR4 = 0x20 ; Transmit list base address
CSR5 = 0x28 ; Status
CSR6 = 0x30 ; Operation mode
CSR7 = 0x38 ; Interrupt enable
CSR8 = 0x40 ; Missed frames and overflow counter
CSR9 = 0x48 ; Boot ROM, serial ROM, and MII management
CSR10 = 0x50 ; Boot ROM programming address
CSR11 = 0x58 ; General-purpose timer
CSR12 = 0x60 ; General-purpose port
CSR13 = 0x68
CSR14 = 0x70
CSR15 = 0x78 ; Watchdog timer
;--------bits/commands of CSR0-------------------
CSR0_RESET = 1b
CSR0_WIE = 1 shl 24 ; Write and Invalidate Enable
CSR0_RLE = 1 shl 23 ; PCI Read Line Enable
CSR0_RML = 1 shl 21 ; PCI Read Multiple
CSR0_CACHEALIGN_NONE = 00b shl 14
CSR0_CACHEALIGN_32 = 01b shl 14
CSR0_CACHEALIGN_64 = 10b shl 14
CSR0_CACHEALIGN_128 = 11b shl 14
; using values from linux driver..
CSR0_DEFAULT = CSR0_WIE + CSR0_RLE + CSR0_RML + CSR0_CACHEALIGN_NONE
;------- CSR5 -STATUS- bits --------------------------------
CSR5_TI = 0x00000001 ;1 shl 0 ; Transmit interupt - frame transmition completed
CSR5_TPS = 0x00000002 ;1 shl 1 ; Transmit process stopped
CSR5_TU = 0x00000004 ;1 shl 2 ; Transmit Buffer unavailable
CSR5_TJT = 0x00000008 ;1 shl 3 ; Transmit Jabber Timeout (transmitter had been excessively active)
CSR5_LP = 0x00000010 ;1 shl 4 ; Link pass
CSR5_UNF = 0x00000020 ;1 shl 5 ; Transmit underflow - FIFO underflow
CSR5_RI = 0x00000040 ;1 shl 6 ; Receive Interrupt
CSR5_RU = 0x00000080 ;1 shl 7 ; Receive Buffer unavailable
CSR5_RPS = 0x00000100 ;1 shl 8 ; Receive Process stopped
CSR5_RWT = 0x00000200 ;1 shl 9 ; Receive Watchdow Timeout
CSR5_ETI = 0x00000400 ;1 shl 10 ; Early transmit Interrupt
CSR5_GTE = 0x00000800 ;1 shl 11 ; General Purpose Timer Expired
CSR5_LF = 0x00001000 ;1 shl 12 ; Link Fail
CSR5_FBE = 0x00002000 ;1 shl 13 ; Fatal bus error
CSR5_ERI = 0x00004000 ;1 shl 14 ; Early receive Interrupt
CSR5_AIS = 0x00008000 ;1 shl 15 ; Abnormal interrupt summary
CSR5_NIS = 0x00010000 ;1 shl 16 ; normal interrupt summary
CSR5_RS_SH = 17 ; Receive process state -shift
CSR5_RS_MASK = 111b ; -mask
CSR5_TS_SH = 20 ; Transmit process state -shift
CSR5_TS_MASK = 111b ; -mask
CSR5_EB_SH = 23 ; Error bits -shift
CSR5_EB_MASK = 111b ; Error bits -mask
;CSR5 TS values
CSR5_TS_STOPPED = 000b
CSR5_TS_RUNNING_FETCHING_DESC = 001b
CSR5_TS_RUNNING_WAITING_TX = 010b
CSR5_TS_RUNNING_READING_BUFF = 011b
CSR5_TS_RUNNING_SETUP_PCKT = 101b
CSR5_TS_SUSPENDED = 110b
CSR5_TS_RUNNING_CLOSING_DESC = 111b
;------- CSR6 -OPERATION MODE- bits --------------------------------
CSR6_HP = 1 shl 0 ; Hash/Perfect Receive Filtering mode
CSR6_SR = 1 shl 1 ; Start/Stop receive
CSR6_HO = 1 shl 2 ; Hash only Filtering mode
CSR6_PB = 1 shl 3 ; Pass bad frames
CSR6_IF = 1 shl 4 ; Inverse filtering
CSR6_SB = 1 shl 5 ; Start/Stop backoff counter
CSR6_PR = 1 shl 6 ; Promiscuous mode -default after reset
CSR6_PM = 1 shl 7 ; Pass all multicast
CSR6_F = 1 shl 9 ; Full Duplex mode
CSR6_OM_SH = 10 ; Operating Mode -shift
CSR6_OM_MASK = 11b ; -mask
CSR6_FC = 1 shl 12 ; Force Collision Mode
CSR6_ST = 1 shl 13 ; Start/Stop Transmission Command
CSR6_TR_SH = 14 ; Threshold Control -shift
CSR6_TR_MASK = 11b ; -mask
CSR6_CA = 1 shl 17 ; Capture Effect Enable
CSR6_PS = 1 shl 18 ; Port select SRL / MII/SYM
CSR6_HBD = 1 shl 19 ; Heartbeat Disable
CSR6_SF = 1 shl 21 ; Store and Forward -transmit full packet only
CSR6_TTM = 1 shl 22 ; Transmit Threshold Mode -
CSR6_PCS = 1 shl 23 ; PCS active and MII/SYM port operates in symbol mode
CSR6_SCR = 1 shl 24 ; Scrambler Mode
CSR6_MBO = 1 shl 25 ; Must Be One
CSR6_RA = 1 shl 30 ; Receive All
CSR6_SC = 1 shl 31 ; Special Capture Effect Enable
;------- CSR7 -INTERRUPT ENABLE- bits --------------------------------
CSR7_TI = 1 shl 0 ; transmit Interrupt Enable (set with CSR7<16> & CSR5<0> )
CSR7_TS = 1 shl 1 ; transmit Stopped Enable (set with CSR7<15> & CSR5<1> )
CSR7_TU = 1 shl 2 ; transmit buffer underrun Enable (set with CSR7<16> & CSR5<2> )
CSR7_TJ = 1 shl 3 ; transmit jabber timeout enable (set with CSR7<15> & CSR5<3> )
CSR7_UN = 1 shl 5 ; underflow Interrupt enable (set with CSR7<15> & CSR5<5> )
CSR7_RI = 1 shl 6 ; receive Interrupt enable (set with CSR7<16> & CSR5<5> )
CSR7_RU = 1 shl 7 ; receive buffer unavailable enable (set with CSR7<15> & CSR5<7> )
CSR7_RS = 1 shl 8 ; Receive stopped enable (set with CSR7<15> & CSR5<8> )
CSR7_RW = 1 shl 9 ; receive watchdog timeout enable (set with CSR7<15> & CSR5<9> )
CSR7_ETE = 1 shl 10 ; Early transmit Interrupt enable (set with CSR7<15> & CSR5<10> )
CSR7_GPT = 1 shl 11 ; general purpose timer enable (set with CSR7<15> & CSR5<11> )
CSR7_FBE = 1 shl 13 ; Fatal bus error enable (set with CSR7<15> & CSR5<13> )
CSR7_ERE = 1 shl 14 ; Early receive enable (set with CSR7<16> & CSR5<14> )
CSR7_AI = 1 shl 15 ; Abnormal Interrupt Summary Enable (enables CSR5<0,3,7,8,9,10,13>)
CSR7_NI = 1 shl 16 ; Normal Interrup Enable (enables CSR5<0,2,6,11,14>)
CSR7_DEFAULT = CSR7_TI + CSR7_TS + CSR7_RI + CSR7_RS + CSR7_TU + CSR7_TJ + CSR7_UN + \
CSR7_RU + CSR7_RW + CSR7_FBE + CSR7_AI + CSR7_NI
;common to Rx and Tx
DES0_OWN = 1 shl 31 ; if set, the NIC controls the descriptor, otherwise driver 'owns' the descriptors
;receive
RDES0_ZER = 1 shl 0 ; must be 0 if legal length :D
RDES0_CE = 1 shl 1 ; CRC error, valid only on last desc (RDES0<8>=1)
RDES0_DB = 1 shl 2 ; dribbling bit - not multiple of 8 bits, valid only on last desc (RDES0<8>=1)
RDES0_RE = 1 shl 3 ; Report on MII error.. i dont realy know what this means :P
RDES0_RW = 1 shl 4 ; received watchdog timer expiration - must set CSR5<9>, valid only on last desc (RDES0<8>=1)
RDES0_FT = 1 shl 5 ; frame type: 0->IEEE802.0 (len<1500) 1-> ETHERNET frame (len>1500), valid only on last desc (RDES0<8>=1)
RDES0_CS = 1 shl 6 ; Collision seen, valid only on last desc (RDES0<8>=1)
RDES0_TL = 1 shl 7 ; Too long(>1518)-NOT AN ERROR, valid only on last desc (RDES0<8>=1)
RDES0_LS = 1 shl 8 ; Last descriptor of current frame
RDES0_FS = 1 shl 9 ; First descriptor of current frame
RDES0_MF = 1 shl 10 ; Multicast frame, valid only on last desc (RDES0<8>=1)
RDES0_RF = 1 shl 11 ; Runt frame, valid only on last desc (RDES0<8>=1) and id overflow
RDES0_DT_SERIAL = 00b shl 12 ; Data type-Serial recv frame, valid only on last desc (RDES0<8>=1)
RDES0_DT_INTERNAL = 01b shl 12 ; Data type-Internal loopback recv frame, valid only on last desc (RDES0<8>=1)
RDES0_DT_EXTERNAL = 11b shl 12 ; Data type-External loopback recv frame, valid only on last desc (RDES0<8>=1)
RDES0_DE = 1 shl 14 ; Descriptor error - cant own a new desc and frame doesnt fit, valid only on last desc (RDES0<8>=1)
RDES0_ES = 1 shl 15 ; Error Summmary - bits 1+6+11+14, valid only on last desc (RDES0<8>=1)
RDES0_FL_SH = 16 ; Field length shift, valid only on last desc (RDES0<8>=1)
RDES0_FL_MASK = 11111111111111b ; Field length mask (+CRC), valid only on last desc (RDES0<8>=1)
RDES0_FF = 1 shl 30 ; Filtering fail-frame failed address recognition test(must CSR6<30>=1), valid only on last desc (RDES0<8>=1)
RDES1_RBS1_MASK = 11111111111b ; first buffer size MASK
RDES1_RBS2_SH = 11 ; second buffer size SHIFT
RDES1_RBS2_MASK = 11111111111b ; second buffer size MASK
RDES1_RCH = 1 shl 24 ; Second address chained - second address (buffer) is next desc address
RDES1_RER = 1 shl 25 ; Receive End of Ring - final descriptor, NIC must return to first desc
;transmition
TDES0_DE = 1 shl 0 ; Deffered
TDES0_UF = 1 shl 1 ; Underflow error
TDES0_LF = 1 shl 2 ; Link fail report (only if CSR6<23>=1)
TDES0_CC_SH = 3 ; Collision Count shift - no of collision before transmition
TDES0_CC_MASK = 1111b ; Collision Count mask
TDES0_HF = 1 shl 7 ; Heartbeat fail
TDES0_EC = 1 shl 8 ; Excessive Collisions - >16 collisions
TDES0_LC = 1 shl 9 ; Late collision
TDES0_NC = 1 shl 10 ; No carrier
TDES0_LO = 1 shl 11 ; Loss of carrier
TDES0_TO = 1 shl 14 ; Transmit Jabber Timeout
TDES0_ES = 1 shl 15 ; Error summary TDES0<1+8+9+10+11+14>=1
TDES1_TBS1_MASK = 11111111111b ; Buffer 1 size mask
TDES1_TBS2_SH = 11 ; Buffer 2 size shift
TDES1_TBS2_MASK = 11111111111b ; Buffer 2 size mask
TDES1_FT0 = 1 shl 22 ; Filtering type 0
TDES1_DPD = 1 shl 23 ; Disabled padding for packets <64bytes, no padding
TDES1_TCH = 1 shl 24 ; Second address chained - second buffer pointer is to next desc
TDES1_TER = 1 shl 25 ; Transmit end of ring - final descriptor
TDES1_AC = 1 shl 26 ; Add CRC disable -pretty obvious
TDES1_SET = 1 shl 27 ; Setup packet
TDES1_FT1 = 1 shl 28 ; Filtering type 1
TDES1_FS = 1 shl 29 ; First segment - buffer is first segment of frame
TDES1_LS = 1 shl 30 ; Last segment
TDES1_IC = 1 shl 31 ; Interupt on completion (CSR5<0>=1) valid when TDES1<30>=1
FULL_DUPLEX_MAGIC = 0x6969
;MAX_ETH_FRAME_SIZE = 1514
struct device ETH_DEVICE
io_addr dd ?
pci_bus dd ?
pci_dev dd ?
irq_line db ?
rb 3 ; alignment
id dd ? ; identification number
io_size dd ?
flags dd ?
csr6 dd ?
csr7 dd ?
if_port dd ?
saved_if_port dd ?
default_port dd ?
mtable dd ?
mii_cnt dd ?
cur_rx dd ?
cur_tx dd ? ; Tx current descriptor to write data to
last_tx dd ? ; Tx current descriptor to read TX completion
rb 0x100-($ and 0xff) ; align 256
rx_ring rb RX_RING_SIZE*2*sizeof.desc
rb 0x100-($ and 0xff) ; align 256
tx_ring rb TX_RING_SIZE*2*sizeof.desc
ends
;----------- descriptor structure ---------------------
struct desc
status dd ? ; bit 31 is 'own' and rest is 'status'
length dd ? ; control bits + bytes-count buffer 1 + bytes-count buffer 2
buffer1 dd ? ; pointer to buffer1
buffer2 dd ? ; pointer to buffer2
ends
;=============================================================================
; serial ROM operations
;=============================================================================
CSR9_SR = 1 shl 11 ; SROM Select
CSR9_RD = 1 shl 14 ; ROM Read Operation
CSR9_SROM_DO = 1 shl 3 ; Data Out for SROM
CSR9_SROM_DI = 1 shl 2 ; Data In to SROM
CSR9_SROM_CK = 1 shl 1 ; clock for SROM
CSR9_SROM_CS = 1 shl 0 ; chip select.. always needed
; assume dx is CSR9
macro SROM_Delay {
push eax
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
pop eax
}
; assume dx is CSR9
macro MDIO_Delay {
push eax
in eax, dx
pop eax
}
macro Bit_Set a_bit {
in eax, dx
or eax, a_bit
out dx , eax
}
macro Bit_Clear a_bit {
in eax, dx
and eax, not (a_bit)
out dx, eax
}
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; proc START ;;
;; ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
proc START c, reason:dword, cmdline:dword
cmp [reason], DRV_ENTRY
jne .fail
DEBUGF 2,"Loading driver\n"
invoke RegService, my_service, service_proc
ret
.fail:
xor eax, eax
ret
endp
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; proc SERVICE_PROC ;;
;; ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
proc service_proc stdcall, ioctl:dword
mov edx, [ioctl]
mov eax, [edx + IOCTL.io_code]
;------------------------------------------------------
cmp eax, 0 ;SRV_GETVERSION
jne @F
cmp [edx + IOCTL.out_size], 4
jb .fail
mov eax, [edx + IOCTL.output]
mov [eax], dword API_VERSION
xor eax, eax
ret
;------------------------------------------------------
@@:
cmp eax, 1 ;SRV_HOOK
jne .fail
cmp [edx + IOCTL.inp_size], 3 ; Data input must be at least 3 bytes
jb .fail
mov eax, [edx + IOCTL.input]
cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given
jne .fail ; other types arent supported for this card yet
; check if the device is already listed
mov esi, device_list
mov ecx, [devices]
test ecx, ecx
jz .firstdevice
; mov eax, [edx + IOCTL.input] ; get the pci bus and device numbers
mov ax, [eax+1] ;
.nextdevice:
mov ebx, [esi]
cmp al, byte[ebx + device.pci_bus]
jne @f
cmp ah, byte[ebx + device.pci_dev]
je .find_devicenum ; Device is already loaded, let's find it's device number
@@:
add esi, 4
loop .nextdevice
; This device doesnt have its own eth_device structure yet, lets create one
.firstdevice:
cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card
jae .fail
allocate_and_clear ebx, sizeof.device, .fail
; Fill in the direct call addresses into the struct
mov [ebx + device.reset], reset
mov [ebx + device.transmit], transmit
mov [ebx + device.unload], unload
mov [ebx + device.name], my_service
; save the pci bus and device numbers
mov eax, [edx + IOCTL.input]
movzx ecx, byte[eax+1]
mov [ebx + device.pci_bus], ecx
movzx ecx, byte[eax+2]
mov [ebx + device.pci_dev], ecx
; Now, it's time to find the base io addres of the PCI device
stdcall PCI_find_io, [ebx + device.pci_bus], [ebx + device.pci_dev]
mov [ebx + device.io_addr], eax
; We've found the io address, find IRQ now
invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line
mov [ebx + device.irq_line], al
DEBUGF 2,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\
[ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.io_addr]:8
; Ok, the eth_device structure is ready, let's probe the device
; Because initialization fires IRQ, IRQ handler must be aware of this device
mov eax, [devices] ; Add the device structure to our device list
mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device)
inc [devices] ;
call probe ; this function will output in eax
test eax, eax
jnz .err2 ; If an error occured, exit
mov [ebx + device.type], NET_TYPE_ETH
invoke NetRegDev
cmp eax, -1
je .destroy
ret
; If the device was already loaded, find the device number and return it in eax
.find_devicenum:
DEBUGF 2,"Trying to find device number of already registered device\n"
invoke NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx
; into a device number in edi
mov eax, edi ; Application wants it in eax instead
DEBUGF 2,"Kernel says: %u\n", eax
ret
; If an error occured, remove all allocated data and exit (returning -1 in eax)
.destroy:
; todo: reset device into virgin state
.err2:
dec [devices]
.err:
DEBUGF 2,"removing device structure\n"
invoke KernelFree, ebx
.fail:
or eax, -1
ret
;------------------------------------------------------
endp
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
;; ;;
;; Actual Hardware dependent code starts here ;;
;; ;;
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
align 4
unload:
; TODO: (in this particular order)
;
; - Stop the device
; - Detach int handler
; - Remove device from local list
; - call unregister function in kernel
; - Remove all allocated structures and buffers the card used
or eax, -1
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Probe ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
probe:
DEBUGF 2,"Probing\n"
invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], 0 ; get device/vendor id
mov esi, chiplist
.loop:
cmp dword[esi], eax
je .got_it
add esi, 6*4
cmp dword[esi], 0
jne .loop
DEBUGF 2, "Unknown chip: 0x%x aborting\n", eax
or eax, -1
ret
.got_it:
lodsd
lodsd
mov [ebx + device.id], eax
lodsd
mov [ebx + device.io_size], eax
lodsd
mov [ebx + device.csr7], eax
lodsd
mov [ebx + device.name], eax
DEBUGF 1, "Detected chip = %s\n", eax
lodsd
mov [ebx + device.flags], eax
; PROBE1
test [ebx + device.flags], FLAG_HAS_ACPI
jz .no_acpi
DEBUGF 1, "Device has ACPI capabilities, time to wake it up\n"
xor eax, eax
invoke PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], 0x40, eax ; wake up the 21143
.no_acpi:
call SROM_GetWidth ; TODO: use this value returned in ecx in the read_word routine!
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Reset ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
reset:
DEBUGF 2,"Reset\n"
; Make the device a bus master
invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command
or al, PCI_CMD_MASTER
invoke PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax
; Stop TX and RX
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR6
in eax, dx
and eax, not (CSR6_ST or CSR6_SR)
out dx, eax
; Clear missed packet counter
set_io [ebx + device.io_addr], CSR8
in eax, dx
;; wait at least 50 PCI cycles
; mov esi, 1000
; invoke Sleep
cmp [ebx + device.id], DC21041
jne @f
; set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR9
in eax, dx
test eax, 0x8000
jz @f
DEBUGF 1, "21040 compatibility mode\n"
mov [ebx + device.id], DC21040
@@:
; Reset the xcvr interface and turn on heartbeat.
cmp [ebx + device.id], DC21041
jne @f
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR13
xor eax, eax
out dx, eax
set_io [ebx + device.io_addr], CSR14
dec eax
out dx, eax
set_io [ebx + device.io_addr], CSR15
inc eax
mov al, 8
out dx, eax
set_io [ebx + device.io_addr], CSR6
in eax, dx
or ax, CSR6_ST
out dx, eax
set_io [ebx + device.io_addr], CSR13
xor eax, eax
mov ax, 0xEF05
out dx, eax
jmp .reset_done
@@:
cmp [ebx + device.id], DC21040
jne @f
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR13
xor eax, eax
out dx, eax
mov al, 4
out dx, eax
jmp .reset_done
@@:
cmp [ebx + device.id], DC21140
jne @f
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR12
mov eax, 0x100
out dx, eax
jmp .reset_done
@@:
cmp [ebx + device.id], DC21142
jne @f
; if tp->mii_cnt
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR6
mov eax, 0x82020000
out dx, eax
set_io [ebx + device.io_addr], CSR13
xor eax, eax
out dx, eax
set_io [ebx + device.io_addr], CSR14
out dx, eax
set_io [ebx + device.io_addr], CSR6
mov eax, 0x820E0000
out dx, eax
jmp .reset_done
;;;; TODO
@@:
cmp [ebx + device.id], LC82C168
jne @f
; TODO
@@:
cmp [ebx + device.id], MX98713
jne @f
; TODO
@@:
.reset_done:
; OPEN
; Reset chip
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR0
mov eax, CSR0_RESET
out dx, eax
; wait at least 50 PCI cycles
mov esi, 100
invoke Sleep
;-----------------------------------
; Read mac from eeprom to driver ram
call read_mac_eeprom
;--------------------------------
; insert irq handler on given irq
movzx eax, [ebx + device.irq_line]
DEBUGF 1,"Attaching int handler to irq %x\n", eax:1
invoke AttachIntHandler, eax, int_handler, ebx
test eax, eax
jnz @f
DEBUGF 2,"Could not attach int handler!\n"
or eax, -1
ret
@@:
;----------------
; Set cache modes
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR0
mov eax, 0x01A00000 or 0x4800 ; CSR0_DEFAULT
out dx, eax
; wait at least 50 PCI cycles
mov esi, 100
invoke Sleep
;---------------------------
; Initialize RX and TX rings
call init_ring
test eax, eax
jnz .err
;-------------------
; Set receive filter
call create_setup_frame
;--------------------------------------------
; setup CSR3 & CSR4 (pointers to descriptors)
lea eax, [ebx + device.rx_ring]
invoke GetPhysAddr
DEBUGF 1,"RX descriptor base address: %x\n", eax
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR3
out dx, eax
lea eax, [ebx + device.tx_ring]
invoke GetPhysAddr
DEBUGF 1,"TX descriptor base address: %x\n", eax
set_io [ebx + device.io_addr], CSR4
out dx, eax
; Select media
push [ebx + device.if_port]
pop [ebx + device.saved_if_port]
cmp [ebx + device.if_port], 0
jne @f
push [ebx + device.default_port]
pop [ebx + device.if_port]
@@:
cmp [ebx + device.id], DC21041
jne @f
cmp [ebx + device.if_port], 4
jbe @f
; invalid port, select inital TP, autosense, autonegotiate
mov [ebx + device.if_port], 4 ; CHECKME
@@:
; Allow selecting a default media
cmp [ebx + device.mtable], 0
je .media_picked
cmp [ebx + device.if_port], 0
je @f
;; TODO
jmp .media_picked
@@:
.media_picked:
mov [ebx + device.csr6], 0
cmp [ebx + device.id], DC21142
jne @f
cmp [ebx + device.if_port], 0
jne @f
;; TODO
mov [ebx + device.csr6], 0x82420200
mov [ebx + device.if_port], 11
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR14
mov eax, 0x0003FFF
out dx, eax
set_io [ebx + device.io_addr], CSR15
xor eax, eax
mov al, 8
out dx, eax
set_io [ebx + device.io_addr], CSR13
mov al, 1
out dx, eax
set_io [ebx + device.io_addr], CSR12
mov ax, 0x1301
out dx, eax
@@:
cmp [ebx + device.id], LC82C168
jne @f
;; TODO
@@:
cmp [ebx + device.id], MX98713
jne @f
@@:
;; wait a bit
; mov esi, 500
; invoke Sleep
; else:
xor eax, eax
inc eax
call select_media
; Start the chip's tx to process setup frame
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR6
mov eax, [ebx + device.csr6]
out dx, eax
or ax, CSR6_ST
out dx, eax
; Enable interrupts by setting the interrupt mask.
set_io [ebx + device.io_addr], CSR5
mov eax, [ebx + device.csr7]
DEBUGF 1, "Setting CSR7 to 0x%x\n", eax
out dx, eax
set_io [ebx + device.io_addr], CSR7
out dx, eax
; Enable receiver
set_io [ebx + device.io_addr], CSR6
mov eax, [ebx + device.csr6]
or eax, 0x2002 + CSR6_RA
out dx, eax
; RX poll demand
set_io [ebx + device.io_addr], CSR2
xor eax, eax
out dx, eax
; Set the mtu, kernel will be able to send now
mov [ebx + device.mtu], 1514
; Set link state to unknown
mov [ebx + device.state], ETH_LINK_UNKNOWN
DEBUGF 1,"Reset completed\n"
; xor eax, eax
ret
.err:
DEBUGF 2,"Reset failed\n"
or eax, -1
ret
align 4
init_ring:
DEBUGF 1,"Init ring\n"
;---------------------
; Setup RX descriptors
lea eax, [ebx + device.rx_ring]
invoke GetPhysAddr
mov edx, eax
push eax
lea edi, [ebx + device.rx_ring]
mov ecx, RX_RING_SIZE
.loop_rx_des:
DEBUGF 1,"RX descriptor 0x%x\n", edi
add edx, sizeof.desc
mov [edi + desc.status], DES0_OWN
mov [edi + desc.length], 1514
push edx edi ecx
invoke NetAlloc, 1514+NET_BUFF.data
pop ecx edi edx
test eax, eax
jz .out_of_mem
mov [edi + RX_RING_SIZE*sizeof.desc], eax
push edx
invoke GetPhysAddr
add eax, NET_BUFF.data
pop edx
mov [edi + desc.buffer1], eax
mov [edi + desc.buffer2], edx
add edi, sizeof.desc
dec ecx
jnz .loop_rx_des
; set last descriptor as LAST
or [edi - sizeof.desc + desc.length], RDES1_RER ; EndOfRing
pop [edi - sizeof.desc + desc.buffer2] ; point it to the first descriptor
;---------------------
; Setup TX descriptors
lea eax, [ebx + device.tx_ring]
invoke GetPhysAddr
mov edx, eax
push eax
lea edi, [ebx + device.tx_ring]
mov ecx, TX_RING_SIZE
.loop_tx_des:
DEBUGF 1,"TX descriptor 0x%x\n", edi
add edx, sizeof.desc
mov [edi + desc.status], 0 ; owned by driver
mov [edi + desc.length], 0
mov [edi + desc.buffer1], 0
mov [edi + desc.buffer2], edx ; pointer to next descr
add edi, sizeof.desc
dec ecx
jnz .loop_tx_des
; set last descriptor as LAST
or [edi - sizeof.desc + desc.length], TDES1_TER ; EndOfRing
pop [edi - sizeof.desc + desc.buffer2] ; point it to the first descriptor
;------------------
; Reset descriptors
xor eax, eax
mov [ebx + device.cur_tx], eax
mov [ebx + device.last_tx], eax
mov [ebx + device.cur_rx], eax
; xor eax, eax
ret
.out_of_mem:
DEBUGF 2, "Out of memory!\n"
pop eax
or eax, -1
ret
; IN: eax = startup
align 4
select_media:
DEBUGF 1, "Selecting media\n"
cmp [ebx + device.mtable], 0
je .no_mtable
DEBUGF 1, "Device has a media table\n"
; default:
mov eax, 0x020E0000
jmp .update_csr6
.no_mtable:
DEBUGF 1, "Device has no media table\n"
cmp [ebx + device.id], DC21041
jne .not_41
DEBUGF 1, "DC21041\n"
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR13
xor eax, eax
out dx, eax ; reset serial interface
set_io [ebx + device.io_addr], CSR14
mov eax, 0x7F3F ;0x7F3F ;0x7F3D ; 10T-FD
out dx, eax
set_io [ebx + device.io_addr], CSR15
mov eax, 0x0008 ;0x0008 ;0x0008 ; 10T-FD
out dx, eax
set_io [ebx + device.io_addr], CSR13
mov eax, 0xEF05 ;0xEF01 ;0xEF09 ; 10T-FD
out dx, eax
mov eax, 0x80020000
jmp .update_csr6
.not_41:
cmp [ebx + device.id], LC82C168
jne .not_LC
DEBUGF 1, "LC82C168\n"
;; TODO
mov eax, 0x812C0000
jmp .update_csr6
.not_LC:
cmp [ebx + device.id], DC21040
jne .not_40
DEBUGF 1, "DC21040\n"
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR11
mov eax, FULL_DUPLEX_MAGIC
out dx, eax
; reset serial interface
set_io [ebx + device.io_addr], CSR13
xor eax, eax
out dx, eax
set_io [ebx + device.io_addr], CSR13
xor eax, eax
cmp [ebx + device.if_port], 0
je @f
mov al, 0xc
out dx, eax
mov eax, 0x01860000
jmp .update_csr6
@@:
mov al, 4
out dx, eax
mov eax, 0x00420000
jmp .update_csr6
.not_40:
DEBUGF 1, "Unkown chip with no media table\n"
cmp [ebx + device.default_port], 0
jne .not_0
cmp [ebx + device.mii_cnt], 0
je @f
mov [ebx + device.if_port], 11
jmp .not_0
@@:
mov [ebx + device.if_port], 3
.not_0:
mov eax, 0x020E0000 ;;;;;
.update_csr6:
and [ebx + device.csr6], 0xfdff
or ax, 0x0200 ;; FULL DUPLEX
or [ebx + device.csr6], eax
DEBUGF 1, "new CSR6: 0x%x\n", [ebx + device.csr6]
ret
align 4
start_link:
DEBUGF 1,"Starting link\n"
; TODO: write working code here
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Send setup packet ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
create_setup_frame:
DEBUGF 1,"Creating setup packet\n"
invoke NetAlloc, 192 + NET_BUFF.data
test eax, eax
jz .err
mov [eax + NET_BUFF.device], ebx
mov [eax + NET_BUFF.length], 192
push eax
lea edi, [eax + NET_BUFF.data]
xor eax, eax
dec ax
stosd
stosd
stosd
mov ecx, 15
.loop:
lea esi, [ebx + device.mac]
lodsw
stosd
dec ecx
jnz .loop
pop eax
; setup descriptor
lea edi, [ebx + device.tx_ring]
DEBUGF 1, "attaching setup packet 0x%x to descriptor 0x%x\n", eax, edi
mov [edi + TX_RING_SIZE*sizeof.desc], eax
invoke GetPhysAddr
add eax, NET_BUFF.data
mov [edi + desc.buffer1], eax
mov [edi + desc.length], TDES1_SET or 192 ; size must be EXACTLY 192 bytes + TDES1_IC
mov [edi + desc.status], DES0_OWN
DEBUGF 1, "descriptor 0x%x\n", edi
; go to next descriptor
inc [ebx + device.cur_tx]
and [ebx + device.cur_tx], TX_RING_SIZE-1
xor eax, eax
ret
.err:
DEBUGF 2, "Out of memory!\n"
or eax, -1
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Transmit ;;
;; ;;
;; In: ebx = pointer to device structure ;;
;; Out: eax = 0 on success ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
proc transmit stdcall bufferptr
pushf
cli
mov esi, [bufferptr]
DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [esi + NET_BUFF.length]
lea eax, [esi + NET_BUFF.data]
DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\
[eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\
[eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\
[eax+13]:2,[eax+12]:2
cmp [esi + NET_BUFF.length], 1514
ja .fail
cmp [esi + NET_BUFF.length], 60
jb .fail
mov eax, [ebx + device.cur_tx]
mov edx, sizeof.desc
mul edx
lea edi, [ebx + device.tx_ring + eax]
test [edi + desc.status], DES0_OWN
jnz .fail
mov eax, [bufferptr]
mov [edi + TX_RING_SIZE*sizeof.desc], eax
add eax, [eax + NET_BUFF.offset]
invoke GetPhysAddr
mov [edi + desc.buffer1], eax
; set packet size
mov eax, [edi + desc.length]
and eax, TDES1_TER ; preserve 'End of Ring' bit
or eax, [esi + NET_BUFF.length] ; set size
or eax, TDES1_FS or TDES1_LS or TDES1_IC ; first descr, last descr, interrupt on complete
mov [edi + desc.length], eax
; set descriptor status
mov [edi + desc.status], DES0_OWN ; say it is now owned by the 21x4x
; Check if transmitter is running
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR6
in eax, dx
test eax, CSR6_ST ; if NOT started, start now
jnz .already_started
or eax, CSR6_ST
DEBUGF 1,"(Re) starting TX\n"
jmp .do_it
.already_started:
; Trigger immediate transmit demand
set_io [ebx + device.io_addr], CSR1
xor eax, eax
.do_it:
out dx, eax
; Update stats
inc [ebx + device.packets_tx]
mov ecx, [esi + NET_BUFF.length]
add dword [ebx + device.bytes_tx], ecx
adc dword [ebx + device.bytes_tx + 4], 0
; go to next descriptor
inc [ebx + device.cur_tx]
and [ebx + device.cur_tx], TX_RING_SIZE-1
DEBUGF 1,"Transmit ok\n"
popf
xor eax, eax
ret
.fail:
DEBUGF 1,"Transmit failed\n"
invoke NetFree, [bufferptr]
popf
or eax, -1
ret
endp
;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Interrupt handler ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;
align 4
int_handler:
push ebx esi edi
DEBUGF 1,"INT\n"
; find pointer of device wich made IRQ occur
mov ecx, [devices]
test ecx, ecx
jz .nothing
mov esi, device_list
.nextdevice:
mov ebx, [esi]
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR5
in eax, dx
and eax, 0x0001ffff
out dx, eax ; send it back to ACK
jnz .got_it
.continue:
add esi, 4
dec ecx
jnz .nextdevice
.nothing:
pop edi esi ebx
xor eax, eax
ret ; If no device was found, abort (The irq was probably for a device, not registered to this driver)
.got_it:
DEBUGF 1,"Device: %x CSR5: %x\n", ebx, eax
;----------------------------------
; TX ok?
test eax, CSR5_TI
jz .not_tx
push eax esi ecx
DEBUGF 1,"TX ok!\n"
.loop_tx:
; get last descriptor
mov eax, [ebx + device.last_tx]
mov edx, sizeof.desc
mul edx
lea eax, [ebx + device.tx_ring + eax]
DEBUGF 1,"descriptor 0x%x\n", eax
test [eax + desc.status], DES0_OWN ; owned by the card?
jnz .end_tx
cmp [eax + desc.buffer1], 0 ; empty descriptor?
je .end_tx
mov [eax + desc.buffer1], 0
DEBUGF 1, "Free buffer 0x%x\n", [eax + TX_RING_SIZE*sizeof.desc]
invoke NetFree, [eax + TX_RING_SIZE*sizeof.desc]
; advance to next descriptor
inc [ebx + device.last_tx]
and [ebx + device.last_tx], TX_RING_SIZE-1
jmp .loop_tx
.end_tx:
pop ecx esi eax
.not_tx:
;----------------------------------
; RX irq
test eax, CSR5_RI
jz .not_rx
push eax esi ecx
DEBUGF 1,"RX ok!\n"
push ebx
.rx_loop:
pop ebx
; get current descriptor
mov eax, [ebx + device.cur_rx]
mov edx, sizeof.desc
mul edx
lea edi, [ebx + device.rx_ring + eax]
; now check status
mov eax, [edi + desc.status]
test eax, DES0_OWN
jnz .end_rx ; current desc is busy, nothing to do
test eax, RDES0_FS
jz .end_rx ; current desc is NOT first packet, ERROR!
test eax, RDES0_LS ; if not last desc of packet, error for now
jz .end_rx
test eax, RDES0_ES
jnz .end_rx
; Calculate length
mov ecx, [edi + desc.status]
shr ecx, RDES0_FL_SH
and ecx, RDES0_FL_MASK
sub ecx, 4 ; throw away the CRC
DEBUGF 1,"got %u bytes\n", ecx
; Push arguments for EthInput (and some more...)
push ebx
push .rx_loop ; return addr
mov eax, dword[edi + RX_RING_SIZE*sizeof.desc]
push eax
mov [eax + NET_BUFF.length], ecx
mov [eax + NET_BUFF.device], ebx
mov [eax + NET_BUFF.offset], NET_BUFF.data
; update statistics
inc [ebx + device.packets_rx]
add dword[ebx + device.bytes_rx], ecx
adc dword[ebx + device.bytes_rx + 4], 0
; Allocate new descriptor
push edi ebx
invoke NetAlloc, 1514 + NET_BUFF.data ; Allocate a buffer to put packet into
pop ebx edi
jz .fail
mov [edi + RX_RING_SIZE*sizeof.desc], eax
invoke GetPhysAddr
add eax, NET_BUFF.data
mov [edi + desc.buffer1], eax
mov [edi + desc.status], DES0_OWN ; mark descriptor as being free
; Move to next rx desc
inc [ebx + device.cur_rx] ; next descriptor
and [ebx + device.cur_rx], RX_RING_SIZE-1
jmp [EthInput]
.end_rx:
.fail:
pop ecx esi eax
.not_rx:
pop edi esi ebx
ret
align 4
write_mac: ; in: mac pushed onto stack (as 3 words)
DEBUGF 1,"Writing MAC\n"
; write data into driver cache
mov esi, esp
lea edi, [ebx + device.mac]
movsd
movsw
add esp, 6
;; send setup packet (only if driver is started)
;; call Create_Setup_Packet
align 4
read_mac_eeprom:
DEBUGF 1,"Reading MAC from eeprom\n"
lea edi, [ebx + device.mac]
mov esi, 20/2 ; read words, start address is 20
.loop:
push esi edi
call SROM_Read_Word
pop edi esi
stosw
inc esi
cmp esi, 26/2
jb .loop
DEBUGF 1,"%x-%x-%x-%x-%x-%x\n",[edi-6]:2,[edi-5]:2,[edi-4]:2,[edi-3]:2,[edi-2]:2,[edi-1]:2
ret
align 4
SROM_GetWidth: ; should be 6 or 8 according to some manuals (returns in ecx)
; DEBUGF 1,"SROM_GetWidth\n"
call SROM_Idle
call SROM_EnterAccessMode
; set_io [ebx + device.io_addr], 0
; set_io [ebx + device.io_addr], CSR9
; send 110b
in eax, dx
or eax, CSR9_SROM_DI
call SROM_out
in eax, dx
or eax, CSR9_SROM_DI
call SROM_out
in eax, dx
and eax, not (CSR9_SROM_DI)
call SROM_out
mov ecx,1
.loop2:
Bit_Set CSR9_SROM_CK
SROM_Delay
in eax, dx
and eax, CSR9_SROM_DO
jnz .not_zero
Bit_Clear CSR9_SROM_CK
SROM_Delay
jmp .end_loop2
.not_zero:
Bit_Clear CSR9_SROM_CK
SROM_Delay
inc ecx
cmp ecx, 12
jbe .loop2
.end_loop2:
DEBUGF 1,"SROM width=%u\n", ecx
call SROM_Idle
call SROM_EnterAccessMode
call SROM_Idle
ret
align 4
SROM_out:
out dx, eax
SROM_Delay
Bit_Set CSR9_SROM_CK
SROM_Delay
Bit_Clear CSR9_SROM_CK
SROM_Delay
ret
align 4
SROM_EnterAccessMode:
; DEBUGF 1,"SROM_EnterAccessMode\n"
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR9
mov eax, CSR9_SR
out dx, eax
SROM_Delay
Bit_Set CSR9_RD
SROM_Delay
Bit_Clear CSR9_SROM_CK
SROM_Delay
Bit_Set CSR9_SROM_CS
SROM_Delay
ret
align 4
SROM_Idle:
; DEBUGF 1,"SROM_Idle\n"
call SROM_EnterAccessMode
; set_io [ebx + device.io_addr], 0
; set_io [ebx + device.io_addr], CSR9
mov ecx, 25
.loop_clk:
Bit_Clear CSR9_SROM_CK
SROM_Delay
Bit_Set CSR9_SROM_CK
SROM_Delay
dec ecx
jnz .loop_clk
Bit_Clear CSR9_SROM_CK
SROM_Delay
Bit_Clear CSR9_SROM_CS
SROM_Delay
xor eax, eax
out dx, eax
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Read serial EEprom word ;;
;; ;;
;; In: esi = read address ;;
;; OUT: ax = data word ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
SROM_Read_Word:
; DEBUGF 1,"SROM_Read_word at: %x\n", esi
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR9
; enter access mode
mov eax, CSR9_SR + CSR9_RD
out dx , eax
or eax, CSR9_SROM_CS
out dx , eax
; TODO: change this hard-coded 6-bit stuff to use value from srom_getwidth
; send read command "110b" + address to read from
and esi, 111111b
or esi, 110b shl 6
mov ecx, 1 shl 9
.loop_cmd:
mov eax, CSR9_SR + CSR9_RD + CSR9_SROM_CS
test esi, ecx
jz @f
or eax, CSR9_SROM_DI
@@:
out dx , eax
SROM_Delay
or eax, CSR9_SROM_CK
out dx , eax
SROM_Delay
shr ecx, 1
jnz .loop_cmd
; read data from SROM
xor esi, esi
mov ecx, 17 ;;; TODO: figure out why 17, not 16
.loop_read:
mov eax, CSR9_SR + CSR9_RD + CSR9_SROM_CS + CSR9_SROM_CK
out dx , eax
SROM_Delay
in eax, dx
and eax, CSR9_SROM_DO
shr eax, 3
shl esi, 1
or esi, eax
mov eax, CSR9_SR + CSR9_RD + CSR9_SROM_CS
out dx , eax
SROM_Delay
dec ecx
jnz .loop_read
mov eax, esi
; DEBUGF 1,"%x\n", ax
ret
;*********************************************************************
;* Media Descriptor Code *
;*********************************************************************
; MII transceiver control section.
; Read and write the MII registers using software-generated serial
; MDIO protocol. See the MII specifications or DP83840A data sheet
; for details.
; The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
; met by back-to-back PCI I/O cycles, but we insert a delay to avoid
; "overclocking" issues or future 66Mhz PCI.
; Read and write the MII registers using software-generated serial
; MDIO protocol. It is just different enough from the EEPROM protocol
; to not share code. The maxium data clock rate is 2.5 Mhz.
MDIO_SHIFT_CLK = 0x10000
MDIO_DATA_WRITE0 = 0x00000
MDIO_DATA_WRITE1 = 0x20000
MDIO_ENB = 0x00000 ; Ignore the 0x02000 databook setting.
MDIO_ENB_IN = 0x40000
MDIO_DATA_READ = 0x80000
; MII transceiver control section.
; Read and write the MII registers using software-generated serial
; MDIO protocol. See the MII specifications or DP83840A data sheet
; for details.
align 4
mdio_read: ; phy_id:edx, location:esi
DEBUGF 1,"mdio read, phy=%x, location=%x\n", edx, esi
shl edx, 5
or esi, edx
or esi, 0xf6 shl 10
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR9
; if (tp->chip_id == LC82C168) {
; int i = 1000;
; outl(0x60020000 + (phy_id<<23) + (location<<18), ioaddr + 0xA0);
; inl(ioaddr + 0xA0);
; inl(ioaddr + 0xA0);
; while (--i > 0)
; if ( ! ((retval = inl(ioaddr + 0xA0)) & 0x80000000))
; return retval & 0xffff;
; return 0xffff;
; }
;
; if (tp->chip_id == COMET) {
; if (phy_id == 1) {
; if (location < 7)
; return inl(ioaddr + 0xB4 + (location<<2));
; else if (location == 17)
; return inl(ioaddr + 0xD0);
; else if (location >= 29 && location <= 31)
; return inl(ioaddr + 0xD4 + ((location-29)<<2));
; }
; return 0xffff;
; }
; Establish sync by sending at least 32 logic ones.
mov ecx, 32
.loop:
mov eax, MDIO_ENB or MDIO_DATA_WRITE1
out dx, eax
MDIO_Delay
or eax, MDIO_SHIFT_CLK
out dx, eax
MDIO_Delay
dec ecx
jnz .loop
; Shift the read command bits out.
mov ecx, 1 shl 15
.loop2:
mov eax, MDIO_ENB
test esi, ecx
jz @f
or eax, MDIO_DATA_WRITE1
@@:
out dx, eax
MDIO_Delay
or eax, MDIO_SHIFT_CLK
out dx, eax
MDIO_Delay
shr ecx, 1
jnz .loop2
; Read the two transition, 16 data, and wire-idle bits.
xor esi, esi
mov ecx, 19
.loop3:
mov eax, MDIO_ENB_IN
out dx, eax
MDIO_Delay
shl esi, 1
in eax, dx
test eax, MDIO_DATA_READ
jz @f
inc esi
@@:
mov eax, MDIO_ENB_IN or MDIO_SHIFT_CLK
out dx, eax
MDIO_Delay
dec ecx
jnz .loop3
shr esi, 1
movzx eax, si
DEBUGF 1,"data=%x\n", ax
ret
align 4
mdio_write: ;int phy_id: edx, int location: edi, int value: ax)
DEBUGF 1,"mdio write, phy=%x, location=%x, data=%x\n", edx, edi, ax
shl edi, 18
or edi, 0x5002 shl 16
shl edx, 23
or edi, edx
mov di, ax
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], CSR9
; if (tp->chip_id == LC82C168) {
; int i = 1000;
; outl(cmd, ioaddr + 0xA0);
; do
; if ( ! (inl(ioaddr + 0xA0) & 0x80000000))
; break;
; while (--i > 0);
; return;
; }
; if (tp->chip_id == COMET) {
; if (phy_id != 1)
; return;
; if (location < 7)
; outl(value, ioaddr + 0xB4 + (location<<2));
; else if (location == 17)
; outl(value, ioaddr + 0xD0);
; else if (location >= 29 && location <= 31)
; outl(value, ioaddr + 0xD4 + ((location-29)<<2));
; return;
; }
; Establish sync by sending at least 32 logic ones.
mov ecx, 32
.loop:
mov eax, MDIO_ENB or MDIO_DATA_WRITE1
out dx, eax
MDIO_Delay
or eax, MDIO_SHIFT_CLK
out dx, eax
MDIO_Delay
dec ecx
jnz .loop
; Shift the command bits out.
mov ecx, 1 shl 31
.loop2:
mov eax, MDIO_ENB
test edi, ecx
jz @f
or eax, MDIO_DATA_WRITE1
@@:
out dx, eax
MDIO_Delay
or eax, MDIO_SHIFT_CLK
out dx, eax
MDIO_Delay
shr ecx, 1
jnz .loop2
; Clear out extra bits.
mov ecx, 2
.loop3:
mov eax, MDIO_ENB
out dx, eax
MDIO_Delay
or eax, MDIO_SHIFT_CLK
out dx, eax
MDIO_Delay
dec ecx
jnz .loop3
ret
; End of code
data fixups
end data
include '../peimport.inc'
my_service db 'DEC21X4X',0 ; max 16 chars include zero
chiplist:
; PCI id's , chip ,IO size, CSR7 , name , flags
dd 0x00021011, DC21040, 128, 0x0001ebef, sz_040, 0
dd 0x00141011, DC21041, 128, 0x0001ebef, sz_041, FLAG_HAS_MEDIA_TABLE
dd 0x00091011, DC21140, 128, 0x0001ebef, sz_140, FLAG_HAS_MII or FLAG_HAS_MEDIA_TABLE or FLAG_CSR12_IN_SROM
dd 0x00191011, DC21143, 128, 0x0001ebef, sz_143, FLAG_HAS_MII or FLAG_HAS_MEDIA_TABLE or FLAG_ALWAYS_CHECK_MII or FLAG_HAS_ACPI
dd 0x000211AD, LC82C168, 256, 0x0801fbff, sz_lite, FLAG_HAS_MII
dd 0x051210D9, MX98713, 128, 0x0001ebef, sz_m512, FLAG_HAS_MII or FLAG_HAS_MEDIA_TABLE
dd 0x053110D9, MX98715, 256, 0x0001ebef, sz_m513, FLAG_HAS_MEDIA_TABLE
dd 0x1400125B, MX98725, 128, 0x0001fbff, sz_asix, FLAG_HAS_MII or FLAG_HAS_MEDIA_TABLE or FLAG_CSR12_IN_SROM
dd 0
sz_040 db "Digital DC21040 Tulip", 0
sz_041 db "Digital DC21041 Tulip", 0
sz_140 db "Digital DS21140 Tulip", 0
sz_143 db "Digital DS21143 Tulip", 0
sz_lite db "Lite-On 82c168 PNIC", 0
sz_m512 db "Macronix 98713 PMAC", 0
sz_m513 db "Macronix 987x5 PMAC", 0
sz_asix db "ASIX AX88140", 0
include_debug_strings ; All data wich FDO uses will be included here
align 4
devices dd 0
device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling
Reference in New Issue View Git Blame Copy Permalink