mirror of
https://github.com/KolibriOS/kolibrios.git
synced 2024-12-11 09:34:09 +03:00
47 lines
2.3 KiB
Plaintext
47 lines
2.3 KiB
Plaintext
BOOT_F32.BIN - bootsector for FAT32;
|
|
MTLD_F32 - auxiliary loader file;
|
|
inst.exe - installer for WinNT+;
|
|
setmbr.exe - installs standard MBR (read below);
|
|
readme.txt - this file.
|
|
|
|
To install, flash with FAT32 file system, with free space available for
|
|
file kolibri.img and a couple of Kb for loader, is required.
|
|
|
|
Installation for WinNT+ users:
|
|
Run inst.exe, it will display a list of connected flash drives. Select
|
|
the drive, on which you want to install, and double-click on it.
|
|
The program will report success or fail (cannot read/write to drive or
|
|
drive is not FAT32-volume).
|
|
Copy to the flash the file kolibri.img with wanted distribution kit version.
|
|
(These two actions can be done in any order.)
|
|
Now you can boot from this flash drive.
|
|
|
|
I have encountered situation, when (recently released) flash does not boot
|
|
and displays message "Pen drive Without Operating System.Remove
|
|
Pen Drive And Reboot." If instead of booting you see the same or like message,
|
|
probably setmbr.exe can help. It must be runned with administrator rights.
|
|
After loading in the appeared list double-click on the drive corresponding to
|
|
your flash drive. Program will report success or fail.
|
|
|
|
Installation for users of other operating systems:
|
|
automatic - not supported yet. If you can work with disk editor, the following
|
|
information may help you: inst.exe does following:
|
|
- reads bootsector, checks that it specifies FAT32;
|
|
- copies to the flash the file MTLD_F32, at the same time sets attributes
|
|
"hidden","system","read-only" (they do not play any role for the loader itself,
|
|
they protect the file from unnecessary curiosity);
|
|
- reads the file BOOT_F32.BIN; in its data replaces volume parameters
|
|
from offset 3 to offset 0x5A (0x57 bytes) to parameters taken from current
|
|
bootsector;
|
|
- writes obtained data back to flash bootsector, and also in backup copy of
|
|
bootsector, if it is present (the 2-byte field on offset 0x32)
|
|
(backup copy indeed is not required to be modified, in real life it is not
|
|
used).
|
|
|
|
Under Linux a new bootsector can be installed to the drive /dev/sdb1 (replace
|
|
with a name of FAT32-volume of any device you want) with the sequence of
|
|
two following commands:
|
|
dd if=/dev/sdb1 of=BOOT_F32.BIN bs=1 skip=3 seek=3 count=87 conv=notrunc
|
|
dd if=BOOT_F32.BIN of=/dev/sdb1 bs=512 count=1 conv=notrunc
|
|
Files mtld_f32 and kolibri.img must be copied as usual.
|