diff --git a/kernel/branches/net/drivers/3c59x.asm b/kernel/branches/net/drivers/3c59x.asm index 03263374d..4af85ffe2 100644 --- a/kernel/branches/net/drivers/3c59x.asm +++ b/kernel/branches/net/drivers/3c59x.asm @@ -342,9 +342,10 @@ virtual at ebx .prev_dpd dd ? .io_addr dd ? - .pci_bus db ? - .pci_dev db ? + .pci_bus dd ? + .pci_dev dd ? .irq_line db ? + rb 3 ; alignment .prev_tx_frame dd ? .ver_id db ? @@ -438,8 +439,11 @@ proc service_proc stdcall, ioctl:dword mov ax , [eax+1] ; .nextdevice: mov ebx, [esi] - cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + cmp al, byte[device.pci_bus] + jne @f + cmp ah, byte[device.pci_dev] je .find_devicenum ; Device is already loaded, let's find it's device number + @@: add esi, 4 loop .nextdevice @@ -454,8 +458,11 @@ proc service_proc stdcall, ioctl:dword mov ax , [eax+1] ; .nextdevice2: mov ebx, [esi] - cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + cmp al, byte[device.pci_bus] + jne @f + cmp ah, byte[device.pci_dev] je .find_devicenum ; Device is already loaded, let's find it's device number + @@: add esi, 4 loop .nextdevice2 @@ -481,16 +488,16 @@ proc service_proc stdcall, ioctl:dword ; save the pci bus and device numbers mov eax, [IOCTL.input] - mov cl , [eax+1] - mov [device.pci_bus], cl - mov cl , [eax+2] - mov [device.pci_dev], cl + movzx ecx, byte[eax+1] + mov [device.pci_bus], ecx + movzx ecx, byte[eax+2] + mov [device.pci_dev], ecx ; Now, it's time to find the base io addres of the PCI device - find_io [device.pci_bus], [device.pci_dev], [device.io_addr] + PCI_find_io ; We've found the io address, find IRQ now - find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] + PCI_find_irq DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:4 @@ -578,14 +585,12 @@ probe: DEBUGF 1,"Probing 3com card\n" - make_bus_master [device.pci_bus], [device.pci_dev] + PCI_make_bus_master ; wake up the card call wake_up - movzx ecx, [device.pci_bus] - movzx edx, [device.pci_dev] - stdcall PciRead32, ecx ,edx ,0 ; get device/vendor id + stdcall PciRead32, [device.pci_bus], [device.pci_dev], 0 ; get device/vendor id DEBUGF 1,"Vendor id: 0x%x\n", ax @@ -618,9 +623,7 @@ probe: jz .not_vortex mov eax, 11111000b ; 248 = max latency - movzx ecx, [device.pci_bus] - movzx edx, [device.pci_dev] - stdcall PciWrite32, ecx, edx, PCI_REG_LATENCY, eax + stdcall PciWrite32, [device.pci_bus], [device.pci_dev], PCI_REG_LATENCY, eax .not_vortex: ; set RX/TX functions @@ -1803,22 +1806,20 @@ wake_up: ; wake up - we directly do it by programming PCI ; check if the device is power management capable - movzx ecx, [device.pci_bus] - movzx edx, [device.pci_dev] - stdcall PciRead32, ecx, edx, PCI_REG_STATUS + stdcall PciRead32, [device.pci_bus], [device.pci_dev], PCI_REG_STATUS test al, 10000b ; is there "new capabilities" linked list? jz .device_awake ; search for power management register - stdcall PciRead16, ecx, edx, PCI_REG_CAP_PTR + stdcall PciRead16, [device.pci_bus], [device.pci_dev], PCI_REG_CAP_PTR cmp al, 0x3f jbe .device_awake ; traverse the list movzx esi, al .pm_loop: - stdcall PciRead32, ecx, edx, esi + stdcall PciRead32, [device.pci_bus], [device.pci_dev], esi cmp al , 1 je .set_pm_state @@ -1833,11 +1834,11 @@ wake_up: .set_pm_state: add esi, PCI_REG_PM_CTRL - stdcall PciRead32, ecx, edx, esi + stdcall PciRead32, [device.pci_bus], [device.pci_dev], esi test al, 3 jz .device_awake and al, not 11b ; set state to D0 - stdcall PciWrite32, ecx, edx, esi, eax + stdcall PciWrite32, [device.pci_bus], [device.pci_dev], esi, eax .device_awake: DEBUGF 1,"Device is awake\n" diff --git a/kernel/branches/net/drivers/R6040.asm b/kernel/branches/net/drivers/R6040.asm index 46bedfd87..d5e859262 100644 --- a/kernel/branches/net/drivers/R6040.asm +++ b/kernel/branches/net/drivers/R6040.asm @@ -192,11 +192,11 @@ virtual at ebx .mcr1 dw ? .switch_sig dw ? - .pci_bus db ? - .pci_dev db ? + .pci_bus dd ? + .pci_dev dd ? .irq_line db ? - rb 1 ; dword alignment + rb 3 ; dword alignment .tx_ring: rb (((x_head.sizeof*TX_RING_SIZE)+32) and 0xfffffff0) .rx_ring: rb (((x_head.sizeof*RX_RING_SIZE)+32) and 0xfffffff0) @@ -285,8 +285,11 @@ proc service_proc stdcall, ioctl:dword mov ax , [eax+1] ; .nextdevice: mov ebx, [esi] - cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + cmp al, byte[device.pci_bus] + jne @f + cmp ah, byte[device.pci_dev] je .find_devicenum ; Device is already loaded, let's find it's device number + @@: add esi, 4 loop .nextdevice @@ -310,18 +313,18 @@ proc service_proc stdcall, ioctl:dword ; save the pci bus and device numbers mov eax, [IOCTL.input] - mov cl , [eax+1] - mov [device.pci_bus], cl - mov cl , [eax+2] - mov [device.pci_dev], cl + movzx ecx, byte[eax+1] + mov [device.pci_bus], ecx + movzx ecx, byte[eax+2] + mov [device.pci_dev], ecx ; Now, it's time to find the base io addres of the PCI device - find_io [device.pci_bus], [device.pci_dev], [device.io_addr] + PCI_find_io ; We've found the io address, find IRQ now - find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] + PCI_find_irq DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:4 @@ -416,7 +419,7 @@ align 4 probe: DEBUGF 2,"Probing R6040 device\n" - make_bus_master [device.pci_bus], [device.pci_dev] + PCI_make_bus_master ; If PHY status change register is still set to zero ; it means the bootloader didn't initialize it diff --git a/kernel/branches/net/drivers/RTL8029.asm b/kernel/branches/net/drivers/RTL8029.asm index d23d917b3..0b82a7580 100644 --- a/kernel/branches/net/drivers/RTL8029.asm +++ b/kernel/branches/net/drivers/RTL8029.asm @@ -40,8 +40,8 @@ virtual at ebx .io_addr dd ? .irq_line db ? - .pci_bus db ? - .pci_dev db ? + .pci_bus dd ? + .pci_dev dd ? .flags db ? .vendor db ? @@ -238,8 +238,11 @@ proc service_proc stdcall, ioctl:dword mov ax, [eax+1] ; get the pci bus and device numbers .nextdevice: mov ebx, [esi] - cmp ax, word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + cmp al, byte[device.pci_bus] + jne @f + cmp ah, byte[device.pci_dev] je .find_devicenum ; Device is already loaded, let's find it's device number + @@: add esi, 4 loop .nextdevice @@ -247,18 +250,18 @@ proc service_proc stdcall, ioctl:dword call create_new_struct mov eax, [IOCTL.input] - mov cl, [eax+1] - mov [device.pci_bus], cl - mov cl, [eax+2] - mov [device.pci_dev], cl + movzx ecx, byte[eax+1] + mov [device.pci_bus], ecx + movzx ecx, byte[eax+2] + mov [device.pci_dev], ecx ; Now, it's time to find the base io addres of the PCI device - find_io [device.pci_bus], [device.pci_dev], [device.io_addr] + PCI_find_io ; We've found the io address, find IRQ now - find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] + PCI_find_irq jmp .hook diff --git a/kernel/branches/net/drivers/RTL8139.asm b/kernel/branches/net/drivers/RTL8139.asm index c49193f00..97afb4d59 100644 --- a/kernel/branches/net/drivers/RTL8139.asm +++ b/kernel/branches/net/drivers/RTL8139.asm @@ -208,8 +208,8 @@ virtual at ebx .io_addr dd ? .curr_tx_desc db ? - .pci_bus db ? - .pci_dev db ? + .pci_bus dd ? + .pci_dev dd ? .irq_line db ? .hw_ver_id db ? @@ -298,8 +298,11 @@ proc service_proc stdcall, ioctl:dword mov ax , [eax+1] ; get the pci bus and device numbers .nextdevice: mov ebx, [esi] - cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + cmp al, byte[device.pci_bus] + jne @f + cmp ah, byte[device.pci_dev] je .find_devicenum ; Device is already loaded, let's find it's device number + @@: add esi, 4 loop .nextdevice @@ -323,18 +326,18 @@ proc service_proc stdcall, ioctl:dword ; save the pci bus and device numbers mov eax, [IOCTL.input] - mov cl, [eax+1] - mov [device.pci_bus], cl - mov cl, [eax+2] - mov [device.pci_dev], cl + movzx ecx, byte[eax+1] + mov [device.pci_bus], ecx + movzx ecx, byte[eax+2] + mov [device.pci_dev], ecx ; Now, it's time to find the base io addres of the PCI device - find_io [device.pci_bus], [device.pci_dev], [device.io_addr] + PCI_find_io ; We've found the io address, find IRQ now - find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] + PCI_find_irq DEBUGF 2, "Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:4 @@ -422,7 +425,7 @@ align 4 probe: DEBUGF 2, "Probing %s device\n", my_service - make_bus_master [device.pci_bus], [device.pci_dev] + PCI_make_bus_master ; get chip version diff --git a/kernel/branches/net/drivers/RTL8169.asm b/kernel/branches/net/drivers/RTL8169.asm index 4bd8da03c..4c1312575 100644 --- a/kernel/branches/net/drivers/RTL8169.asm +++ b/kernel/branches/net/drivers/RTL8169.asm @@ -253,8 +253,8 @@ virtual at ebx ETH_DEVICE .io_addr dd ? - .pci_bus db ? - .pci_dev db ? + .pci_bus dd ? + .pci_dev dd ? .irq_line db ? rb 256-(($ - device) and 255) ; align 256 @@ -442,8 +442,11 @@ proc service_proc stdcall, ioctl:dword mov ax , [eax+1] ; .nextdevice: mov ebx, [esi] - cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + cmp al, byte[device.pci_bus] + jne @f + cmp ah, byte[device.pci_dev] je .find_devicenum ; Device is already loaded, let's find it's device number + @@: add esi, 4 loop .nextdevice @@ -467,20 +470,19 @@ proc service_proc stdcall, ioctl:dword ; save the pci bus and device numbers mov eax, [IOCTL.input] - mov cl , [eax+1] - mov [device.pci_bus], cl - mov cl , [eax+2] - mov [device.pci_dev], cl + movzx ecx, byte[eax+1] + mov [device.pci_bus], ecx + movzx ecx, byte[eax+2] + mov [device.pci_dev], ecx ; Now, it's time to find the base io addres of the PCI device - find_io [device.pci_bus], [device.pci_dev], [device.io_addr] - mov eax, [device.io_addr] - mov [tpc.mmio_addr], eax + PCI_find_io + mov [tpc.mmio_addr], eax ; CHECKME ; We've found the io address, find IRQ now - find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] + PCI_find_irq DEBUGF 2,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:8 @@ -542,7 +544,7 @@ init_board: DEBUGF 1,"init_board\n" - make_bus_master [device.pci_bus], [device.pci_dev] + PCI_make_bus_master ; Soft reset the chip set_io 0 diff --git a/kernel/branches/net/drivers/bus/pci.inc b/kernel/branches/net/drivers/bus/pci.inc index 64a557a98..dc154c68a 100644 --- a/kernel/branches/net/drivers/bus/pci.inc +++ b/kernel/branches/net/drivers/bus/pci.inc @@ -40,18 +40,14 @@ PCI_BIT_MASTER = 4 ; bit2: device acts as a PCI master -macro find_io bus, dev, io { +macro PCI_find_io { local .check, .inc, .got xor eax, eax mov esi, PCI_BASE_ADDRESS_0 - movzx ecx, bus - movzx edx, dev .check: - push ecx edx - stdcall PciRead32, ecx ,edx ,esi - pop edx ecx + stdcall PciRead32, [device.pci_bus], [device.pci_dev], esi test eax, PCI_BASE_ADDRESS_IO_MASK jz .inc @@ -69,18 +65,18 @@ macro find_io bus, dev, io { xor eax, eax .got: - mov io, eax + mov [device.io_addr], eax } -macro find_mmio32 bus, dev, io { +macro PCI_find_mmio32 { local .check, .inc, .got mov esi, PCI_BASE_ADDRESS_0 .check: - stdcall PciRead32, bus, dev, esi + stdcall PciRead32, [device.pci_bus], [device.pci_dev], esi test eax, PCI_BASE_ADDRESS_SPACE_IO ; mmio address? jnz .inc @@ -97,54 +93,40 @@ macro find_mmio32 bus, dev, io { xor eax, eax .got: - mov io, eax + mov [device.mmio_addr], eax } -macro find_irq bus, dev, irq { +macro PCI_find_irq { - push eax edx ecx - movzx ecx, bus - movzx edx, dev - stdcall PciRead8, ecx, edx, PCI_REG_IRQ - mov irq, al - pop ecx edx eax + stdcall PciRead8, [device.pci_bus], [device.pci_dev], PCI_REG_IRQ + mov [device.irq_line], al } -macro find_rev bus, dev, rev { +macro PCI_find_rev { - push eax edx ecx - movzx ecx, bus - movzx edx, dev - stdcall PciRead8, ecx ,edx ,0x8 - mov rev, al - pop ecx edx eax + stdcall PciRead8, [device.pci_bus], [device.pci_dev], PCI_REVISION_ID + mov [device.revision], al } -macro make_bus_master bus, dev { +macro PCI_make_bus_master bus, dev { - movzx ecx, bus - movzx edx, dev - push ecx edx - stdcall PciRead32, ecx ,edx, PCI_REG_COMMAND - pop edx ecx + stdcall PciRead32, [device.pci_bus], [device.pci_dev], PCI_REG_COMMAND or al, PCI_BIT_MASTER - stdcall PciWrite32, ecx, edx, PCI_REG_COMMAND, eax + stdcall PciWrite32, [device.pci_bus], [device.pci_dev], PCI_REG_COMMAND, eax } -macro adjust_latency bus, dev, min { +macro PCI_adjust_latency min { - movzx ecx, bus - movzx edx, dev - push ecx edx - stdcall PciRead8, ecx ,edx, PCI_REG_LATENCY - pop edx ecx + local .not + + stdcall PciRead8, [device.pci_bus], [device.pci_dev], PCI_REG_LATENCY cmp al, min - ja @f + ja .not mov al, min - stdcall PciWrite8, ecx, edx, PCI_REG_LATENCY, eax - @@: + stdcall PciWrite8, [device.pci_bus], [device.pci_dev], PCI_REG_LATENCY, eax + .not: } diff --git a/kernel/branches/net/drivers/dec21x4x.asm b/kernel/branches/net/drivers/dec21x4x.asm index b67716f61..92f52d35d 100644 --- a/kernel/branches/net/drivers/dec21x4x.asm +++ b/kernel/branches/net/drivers/dec21x4x.asm @@ -57,9 +57,10 @@ virtual at ebx .rx_crt_des dd ? ; Rx current descriptor .io_addr dd ? - .pci_bus db ? - .pci_dev db ? + .pci_bus dd ? + .pci_dev dd ? .irq_line db ? + rb 3 ; alignment .size = $ - device @@ -384,8 +385,11 @@ proc service_proc stdcall, ioctl:dword mov ax , [eax+1] ; .nextdevice: mov ebx, [esi] - cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + cmp al, byte[device.pci_bus] + jne @f + cmp ah, byte[device.pci_dev] je .find_devicenum ; Device is already loaded, let's find it's device number + @@: add esi, 4 loop .nextdevice @@ -414,18 +418,18 @@ proc service_proc stdcall, ioctl:dword ; save the pci bus and device numbers mov eax, [IOCTL.input] - mov cl, [eax+1] - mov [device.pci_bus], cl - mov cl, [eax+2] - mov [device.pci_dev], cl + movzx ecx, byte[eax+1] + mov [device.pci_bus], ecx + movzx ecx, byte[eax+2] + mov [device.pci_dev], ecx ; Now, it's time to find the base io addres of the PCI device - find_io [device.pci_bus], [device.pci_dev], [device.io_addr] + PCI_find_io ; We've found the io address, find IRQ now - find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] + PCI_find_irq DEBUGF 2,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:8 @@ -525,11 +529,9 @@ probe: DEBUGF 2,"Probing dec21x4x device: " - make_bus_master [device.pci_bus], [device.pci_dev] + PCI_make_bus_master - movzx eax, [device.pci_bus] - movzx ecx, [device.pci_dev] - stdcall PciRead32, eax ,ecx ,0 ; get device/vendor id + stdcall PciRead32, [device.pci_bus], [device.pci_dev], 0 ; get device/vendor id DEBUGF 1,"Vendor id: 0x%x\n", ax cmp ax, 0x1011 @@ -552,10 +554,8 @@ probe: ; wake up the 21143 - movzx ecx, [device.pci_bus] - movzx edx, [device.pci_dev] xor eax, eax - stdcall PciWrite32, ecx, edx, 0x40, eax + stdcall PciWrite32, [device.pci_bus], [device.pci_dev], 0x40, eax .supported_device: diff --git a/kernel/branches/net/drivers/i8254x.asm b/kernel/branches/net/drivers/i8254x.asm index 85848309b..6adf83889 100644 --- a/kernel/branches/net/drivers/i8254x.asm +++ b/kernel/branches/net/drivers/i8254x.asm @@ -389,7 +389,7 @@ proc service_proc stdcall, ioctl:dword ; Now, it's time to find the base mmio addres of the PCI device - find_mmio32 [device.pci_bus], [device.pci_dev], [device.mmio_addr] + PCI_find_mmio32 ; Create virtual mapping of the physical memory @@ -401,7 +401,7 @@ proc service_proc stdcall, ioctl:dword ; We've found the mmio address, find IRQ now - find_irq byte [device.pci_bus], byte [device.pci_dev], [device.irq_line] + PCI_find_irq DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.mmio_addr]:8 @@ -484,7 +484,7 @@ probe: DEBUGF 1,"Probe\n" - make_bus_master byte [device.pci_bus], byte [device.pci_dev] + PCI_make_bus_master ; TODO: validate the device diff --git a/kernel/branches/net/drivers/mtd80x.asm b/kernel/branches/net/drivers/mtd80x.asm index 522ba2d5f..db3b90e5e 100644 --- a/kernel/branches/net/drivers/mtd80x.asm +++ b/kernel/branches/net/drivers/mtd80x.asm @@ -276,8 +276,8 @@ virtual at ebx .rx_desc rb NUM_RX_DESC*mtd_desc.size .io_addr dd ? - .pci_bus db ? - .pci_dev db ? + .pci_bus dd ? + .pci_dev dd ? .irq_line db ? .dev_id dw ? @@ -386,8 +386,11 @@ proc service_proc stdcall, ioctl:dword mov ax , [eax+1] ; .nextdevice: mov ebx, [esi] - cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + cmp al, byte[device.pci_bus] + jne @f + cmp ah, byte[device.pci_dev] je .find_devicenum ; Device is already loaded, let's find it's device number + @@: add esi, 4 loop .nextdevice @@ -411,18 +414,18 @@ proc service_proc stdcall, ioctl:dword ; save the pci bus and device numbers mov eax, [IOCTL.input] - mov cl , [eax+1] - mov [device.pci_bus], cl - mov cl , [eax+2] - mov [device.pci_dev], cl + movzx ecx, byte[eax+1] + mov [device.pci_bus], ecx + movzx ecx, byte[eax+2] + mov [device.pci_dev], ecx ; Now, it's time to find the base io addres of the PCI device - find_io [device.pci_bus], [device.pci_dev], [device.io_addr] + PCI_find_io ; We've found the io address, find IRQ now - find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] + PCI_find_irq DEBUGF 2,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:8 @@ -513,13 +516,11 @@ probe: DEBUGF 2,"Probing mtd80x device\n" - make_bus_master [device.pci_bus], [device.pci_dev] + PCI_make_bus_master - movzx eax, [device.pci_bus] - movzx ecx, [device.pci_dev] - stdcall PciRead32, eax ,ecx ,0 + stdcall PciRead32, [device.pci_bus], [device.pci_dev], 0 - cmp ax , 0x1516 + cmp ax, 0x1516 jne .notfound shr eax, 16 mov [device.dev_id], ax diff --git a/kernel/branches/net/drivers/pcnet32.asm b/kernel/branches/net/drivers/pcnet32.asm index 1d0885cec..4034fa3df 100644 --- a/kernel/branches/net/drivers/pcnet32.asm +++ b/kernel/branches/net/drivers/pcnet32.asm @@ -316,8 +316,8 @@ virtual at ebx .io_addr dd ? .irq_line db ? - .pci_bus db ? - .pci_dev db ? + .pci_bus dd ? + .pci_dev dd ? .read_csr dd ? .write_csr dd ? @@ -426,8 +426,11 @@ proc service_proc stdcall, ioctl:dword mov ax , [eax+1] ; .nextdevice: mov ebx, [esi] - cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + cmp al, byte[device.pci_bus] + jne @f + cmp ah, byte[device.pci_dev] je .find_devicenum ; Device is already loaded, let's find it's device number + @@: add esi, 4 loop .nextdevice @@ -451,18 +454,18 @@ proc service_proc stdcall, ioctl:dword ; save the pci bus and device numbers mov eax, [IOCTL.input] - mov cl, [eax+1] - mov [device.pci_bus], cl - mov cl, [eax+2] - mov [device.pci_dev], cl + movzx ecx, byte[eax+1] + mov [device.pci_bus], ecx + movzx ecx, byte[eax+2] + mov [device.pci_dev], ecx ; Now, it's time to find the base io addres of the PCI device - find_io [device.pci_bus], [device.pci_dev], [device.io_addr] + PCI_find_io ; We've found the io address, find IRQ now - find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] + PCI_find_irq DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:4 @@ -697,7 +700,7 @@ probe: mov [device.ltint],1 .L11: - make_bus_master [device.pci_bus], [device.pci_dev] + PCI_make_bus_master mov [device.options], PORT_ASEL mov [device.mode_], MODE_RXD + MODE_TXD ; disable receive and transmit diff --git a/kernel/branches/net/drivers/rhine.asm b/kernel/branches/net/drivers/rhine.asm index 100678c36..d1c9dd5be 100644 --- a/kernel/branches/net/drivers/rhine.asm +++ b/kernel/branches/net/drivers/rhine.asm @@ -489,8 +489,8 @@ virtual at ebx ETH_DEVICE .io_addr dd ? - .pci_dev db ? - .pci_bus db ? + .pci_dev dd ? + .pci_bus dd ? .revision db ? .irq_line db ? .chip_id dw ? @@ -614,8 +614,11 @@ proc service_proc stdcall, ioctl:dword mov ax , [eax+1] ; .nextdevice: mov ebx, [esi] - cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + cmp al, byte[device.pci_bus] + jne @f + cmp ah, byte[device.pci_dev] je .find_devicenum ; Device is already loaded, let's find it's device number + @@: add esi, 4 loop .nextdevice @@ -639,18 +642,18 @@ proc service_proc stdcall, ioctl:dword ; save the pci bus and device numbers mov eax, [IOCTL.input] - mov cl , [eax+1] - mov [device.pci_bus], cl - mov cl , [eax+2] - mov [device.pci_dev], cl + movzx ecx, byte[eax+1] + mov [device.pci_bus], ecx + movzx ecx, byte[eax+2] + mov [device.pci_dev], ecx ; Now, it's time to find the base io addres of the PCI device - find_io [device.pci_bus], [device.pci_dev], [device.io_addr] + PCI_find_io ; We've found the io address, find IRQ now - find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] + PCI_find_irq DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:4 @@ -718,16 +721,14 @@ probe: DEBUGF 1, "Probing card at 0x%x\n", eax ; make the card a bus master - make_bus_master [device.pci_bus], [device.pci_dev] + PCI_make_bus_master ; get device id - movzx ecx, [device.pci_bus] - movzx edx, [device.pci_dev] - stdcall PciRead16, ecx, edx, PCI_DEVICE_ID + stdcall PciRead16, [device.pci_bus], [device.pci_dev], PCI_DEVICE_ID mov [device.chip_id], ax ; get revision id. - find_rev [device.pci_bus], [device.pci_dev], [device.revision] + PCI_find_rev movzx eax, [device.revision] DEBUGF 1, "Card revision = 0x%x\n", eax @@ -808,11 +809,9 @@ probe: out dx, al ; turn on bit2 in PCI configuration register 0x53 , only for 3065 - movzx ecx, [device.pci_bus] - movzx edx, [device.pci_dev] - stdcall PciRead8, ecx, edx, PCI_REG_MODE3 + stdcall PciRead8, [device.pci_bus], [device.pci_dev], PCI_REG_MODE3 or al, MODE3_MIION - stdcall PciWrite8, ecx, edx, PCI_REG_MODE3, eax + stdcall PciWrite8, [device.pci_bus], [device.pci_dev], PCI_REG_MODE3, eax .not_vt3065: ; back off algorithm, disable the right-most 4-bit off CFGD diff --git a/kernel/branches/net/drivers/sis900.asm b/kernel/branches/net/drivers/sis900.asm index 808c142cd..3c0acbbfd 100644 --- a/kernel/branches/net/drivers/sis900.asm +++ b/kernel/branches/net/drivers/sis900.asm @@ -213,14 +213,15 @@ virtual at ebx ETH_DEVICE .io_addr dd ? - .pci_bus db ? - .pci_dev db ? + .pci_bus dd ? + .pci_dev dd ? .irq_line db ? .cur_rx db ? .cur_tx db ? .last_tx db ? .pci_revision db ? .table_entries db ? + rb 2 ; alignment .txd rd (4 * NUM_TX_DESC) .rxd rd (4 * NUM_RX_DESC) @@ -305,8 +306,11 @@ service_proc: mov ax, [eax+1] ; .nextdevice: mov ebx, [esi] - cmp ax, word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + cmp al, byte[device.pci_bus] + jne @f + cmp ah, byte[device.pci_dev] je .find_devicenum ; Device is already loaded, let's find it's device number + @@: add esi, 4 loop .nextdevice ; 4e. This device doesn't have its own eth_device structure yet, let's create one @@ -319,10 +323,10 @@ service_proc: allocate_and_clear ebx, device.size, .fail ; 4i. Save PCI coordinates mov eax, [IOCTL.input] - mov cl, [eax+1] - mov [device.pci_bus], cl - mov cl, [eax+2] - mov [device.pci_dev], cl + movzx ecx, byte[eax+1] + mov [device.pci_bus], ecx + movzx ecx, byte[eax+2] + mov [device.pci_dev], ecx ; 4j. Fill in the direct call addresses into the struct. ; Note that get_MAC pointer is filled in initialization by probe. mov [device.reset], reset @@ -335,10 +339,10 @@ service_proc: ; TODO: implement check if bus and dev exist on this machine ; Now, it's time to find the base io addres of the PCI device - find_io [device.pci_bus], [device.pci_dev], [device.io_addr] + PCI_find_io ; We've found the io address, find IRQ now - find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] + PCI_find_irq ; 4m. Add new device to the list (required for int_handler). mov eax, [devices] @@ -414,17 +418,14 @@ probe: DEBUGF 1, "Probe\n" ; wake up device CHECKME - movzx eax, [device.pci_bus] - movzx edx, [device.pci_dev] - stdcall PciWrite8, eax, edx, 0x40, 0 + stdcall PciWrite8, [device.pci_bus], [device.pci_dev], 0x40, 0 - make_bus_master [device.pci_bus], [device.pci_dev] - adjust_latency [device.pci_bus], [device.pci_dev], 64 + PCI_make_bus_master + + PCI_adjust_latency 64 ; Get Card Revision - movzx eax, [device.pci_bus] - movzx edx, [device.pci_dev] - stdcall PciRead8, eax, edx, 0x08 + stdcall PciRead8, [device.pci_bus], [device.pci_dev], 0x08 mov [device.pci_revision], al ; save the revision for later use ; Look up through the specific_table